linux/arch/sh/kernel/cpu/Makefile

#
# Makefile for the Linux/SuperH CPU-specifc backends.
#

obj-$(CONFIG_CPU_SH2)		= sh2/
obj-$(CONFIG_CPU_SH2A)		= sh2a/
obj-$(CONFIG_CPU_SH3)		= sh3/
obj-$(CONFIG_CPU_SH4)		= sh4/
obj-$(CONFIG_CPU_SH5)		= sh5/

# Special cases for family ancestry.

obj-$(CONFIG_CPU_SH4A)		+= sh4a/
obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/

# Common interfaces.

obj-$(CONFIG_SH_ADC)		+= adc.o
obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
obj-$(CONFIG_SH_FPU)		+= fpu.o
obj-$(CONFIG_SH_FPU_EMU)	+= fpu.o

obj-y	+= irq/ init.o clock.o hwblk.o proc.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00			`#`
			`# Makefile for the Linux/SuperH CPU-specifc backends.`
			`#`

sh: Add support for SH7206 and SH7619 CPU subtypes. This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2006-11-05 06:40:13 +00:00			`obj-$(CONFIG_CPU_SH2) = sh2/`
			`obj-$(CONFIG_CPU_SH2A) = sh2a/`
			`obj-$(CONFIG_CPU_SH3) = sh3/`
			`obj-$(CONFIG_CPU_SH4) = sh4/`
sh: Move over the SH-5 entry.S. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2007-11-11 09:11:18 +00:00			`obj-$(CONFIG_CPU_SH5) = sh5/`

			`# Special cases for family ancestry.`

sh: SH-MobileR SH7722 CPU support. This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2006-12-11 11:28:03 +00:00			`obj-$(CONFIG_CPU_SH4A) += sh4a/`
sh: Consolidate SH-Mobile CPU code in arch/sh/kernel/cpu/shmobile/. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2009-03-16 11:00:17 +00:00			`obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00
sh: Move over the SH-5 entry.S. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2007-11-11 09:11:18 +00:00			`# Common interfaces.`

[PATCH] sh: IRQ handler updates This moves the various IRQ controller drivers into a new subdirectory, and also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780 interrupts, rather than just ST-40. The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as new ports are expected to be based off of CONFIG_SH_UNKNOWN. Since there are plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2006-01-17 06:14:14 +00:00			`obj-$(CONFIG_SH_ADC) += adc.o`
sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c Move the CPG helpers to drivers/sh/clk-cpg.c V2. This to allow SH-Mobile ARM to share the code with SH. All functions except the legacy CPG stuff is moved. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-05-11 13:29:34 +00:00			`obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o`
sh: Move over to dynamically allocated FPU context. This follows the x86 xstate changes and implements a task_xstate slab cache that is dynamically sized to match one of hard FP/soft FP/FPU-less. This also tidies up and consolidates some of the SH-2A/SH-4 FPU fragmentation. Now fpu state restorers are commonly defined, with the init_fpu()/fpu_init() mess reworked to follow the x86 convention. The fpu_init() register initialization has been replaced by xstate setup followed by writing out to hardware via the standard restore path. As init_fpu() now performs a slab allocation a secondary lighterweight restorer is also introduced for the context switch. In the future the DSP state will be rolled in here, too. More work remains for math emulation and the SH-5 FPU, which presently uses its own special (UP-only) interfaces. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-01-13 03:51:40 +00:00			`obj-$(CONFIG_SH_FPU) += fpu.o`
			`obj-$(CONFIG_SH_FPU_EMU) += fpu.o`
sh: Add support for SH7206 and SH7619 CPU subtypes. This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2006-11-05 06:40:13 +00:00
sh: Break out cpuinfo_op procfs bits. Presently this is all inlined in setup.c, which is not really the place for it. Follow the x86 example and split it out into its own file. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-11-01 16:44:25 +00:00			`obj-y += irq/ init.o clock.o hwblk.o proc.o`