linux/drivers/spi/spi-mtk-nor.c

988 lines
25 KiB
C
Raw Normal View History

spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
// SPDX-License-Identifier: GPL-2.0
//
// Mediatek SPI NOR controller driver
//
// Copyright (C) 2020 Chuanhong Guo <gch981213@gmail.com>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
#include <linux/string.h>
#define DRIVER_NAME "mtk-spi-nor"
#define MTK_NOR_REG_CMD 0x00
#define MTK_NOR_CMD_WRITE BIT(4)
#define MTK_NOR_CMD_PROGRAM BIT(2)
#define MTK_NOR_CMD_READ BIT(0)
#define MTK_NOR_CMD_MASK GENMASK(5, 0)
#define MTK_NOR_REG_PRG_CNT 0x04
#define MTK_NOR_PRG_CNT_MAX 56
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
#define MTK_NOR_REG_RDATA 0x0c
#define MTK_NOR_REG_RADR0 0x10
#define MTK_NOR_REG_RADR(n) (MTK_NOR_REG_RADR0 + 4 * (n))
#define MTK_NOR_REG_RADR3 0xc8
#define MTK_NOR_REG_WDATA 0x1c
#define MTK_NOR_REG_PRGDATA0 0x20
#define MTK_NOR_REG_PRGDATA(n) (MTK_NOR_REG_PRGDATA0 + 4 * (n))
#define MTK_NOR_REG_PRGDATA_MAX 5
#define MTK_NOR_REG_SHIFT0 0x38
#define MTK_NOR_REG_SHIFT(n) (MTK_NOR_REG_SHIFT0 + 4 * (n))
#define MTK_NOR_REG_SHIFT_MAX 9
#define MTK_NOR_REG_CFG1 0x60
#define MTK_NOR_FAST_READ BIT(0)
#define MTK_NOR_REG_CFG2 0x64
#define MTK_NOR_WR_CUSTOM_OP_EN BIT(4)
#define MTK_NOR_WR_BUF_EN BIT(0)
#define MTK_NOR_REG_PP_DATA 0x98
#define MTK_NOR_REG_IRQ_STAT 0xa8
#define MTK_NOR_REG_IRQ_EN 0xac
#define MTK_NOR_IRQ_DMA BIT(7)
#define MTK_NOR_IRQ_MASK GENMASK(7, 0)
#define MTK_NOR_REG_CFG3 0xb4
#define MTK_NOR_DISABLE_WREN BIT(7)
#define MTK_NOR_DISABLE_SR_POLL BIT(5)
#define MTK_NOR_REG_WP 0xc4
#define MTK_NOR_ENABLE_SF_CMD 0x30
#define MTK_NOR_REG_BUSCFG 0xcc
#define MTK_NOR_4B_ADDR BIT(4)
#define MTK_NOR_QUAD_ADDR BIT(3)
#define MTK_NOR_QUAD_READ BIT(2)
#define MTK_NOR_DUAL_ADDR BIT(1)
#define MTK_NOR_DUAL_READ BIT(0)
#define MTK_NOR_BUS_MODE_MASK GENMASK(4, 0)
#define MTK_NOR_REG_DMA_CTL 0x718
#define MTK_NOR_DMA_START BIT(0)
#define MTK_NOR_REG_DMA_FADR 0x71c
#define MTK_NOR_REG_DMA_DADR 0x720
#define MTK_NOR_REG_DMA_END_DADR 0x724
#define MTK_NOR_REG_DMA_DADR_HB 0x738
#define MTK_NOR_REG_DMA_END_DADR_HB 0x73c
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
#define MTK_NOR_PRG_MAX_SIZE 6
// Reading DMA src/dst addresses have to be 16-byte aligned
#define MTK_NOR_DMA_ALIGN 16
#define MTK_NOR_DMA_ALIGN_MASK (MTK_NOR_DMA_ALIGN - 1)
// and we allocate a bounce buffer if destination address isn't aligned.
#define MTK_NOR_BOUNCE_BUF_SIZE PAGE_SIZE
// Buffered page program can do one 128-byte transfer
#define MTK_NOR_PP_SIZE 128
#define CLK_TO_US(sp, clkcnt) DIV_ROUND_UP(clkcnt, sp->spi_freq / 1000000)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
struct mtk_nor_caps {
u8 dma_bits;
/* extra_dummy_bit is adding for the IP of new SoCs.
* Some new SoCs modify the timing of fetching registers' values
* and IDs of nor flash, they need a extra_dummy_bit which can add
* more clock cycles for fetching data.
*/
u8 extra_dummy_bit;
};
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
struct mtk_nor {
struct spi_controller *ctlr;
struct device *dev;
void __iomem *base;
u8 *buffer;
dma_addr_t buffer_dma;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
struct clk *spi_clk;
struct clk *ctlr_clk;
struct clk *axi_clk;
struct clk *axi_s_clk;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
unsigned int spi_freq;
bool wbuf_en;
bool has_irq;
bool high_dma;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
struct completion op_done;
const struct mtk_nor_caps *caps;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
};
static inline void mtk_nor_rmw(struct mtk_nor *sp, u32 reg, u32 set, u32 clr)
{
u32 val = readl(sp->base + reg);
val &= ~clr;
val |= set;
writel(val, sp->base + reg);
}
static inline int mtk_nor_cmd_exec(struct mtk_nor *sp, u32 cmd, ulong clk)
{
ulong delay = CLK_TO_US(sp, clk);
u32 reg;
int ret;
writel(cmd, sp->base + MTK_NOR_REG_CMD);
ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CMD, reg, !(reg & cmd),
delay / 3, (delay + 1) * 200);
if (ret < 0)
dev_err(sp->dev, "command %u timeout.\n", cmd);
return ret;
}
static void mtk_nor_set_addr(struct mtk_nor *sp, const struct spi_mem_op *op)
{
u32 addr = op->addr.val;
int i;
for (i = 0; i < 3; i++) {
writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR(i));
addr >>= 8;
}
if (op->addr.nbytes == 4) {
writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR3);
mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, MTK_NOR_4B_ADDR, 0);
} else {
mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, 0, MTK_NOR_4B_ADDR);
}
}
static bool need_bounce(struct mtk_nor *sp, const struct spi_mem_op *op)
{
return ((uintptr_t)op->data.buf.in & MTK_NOR_DMA_ALIGN_MASK);
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
static bool mtk_nor_match_read(const struct spi_mem_op *op)
{
int dummy = 0;
if (op->dummy.nbytes)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
dummy = op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth;
if ((op->data.buswidth == 2) || (op->data.buswidth == 4)) {
if (op->addr.buswidth == 1)
return dummy == 8;
else if (op->addr.buswidth == 2)
return dummy == 4;
else if (op->addr.buswidth == 4)
return dummy == 6;
} else if ((op->addr.buswidth == 1) && (op->data.buswidth == 1)) {
if (op->cmd.opcode == 0x03)
return dummy == 0;
else if (op->cmd.opcode == 0x0b)
return dummy == 8;
}
return false;
}
static bool mtk_nor_match_prg(const struct spi_mem_op *op)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{
int tx_len, rx_len, prg_len, prg_left;
// prg mode is spi-only.
if ((op->cmd.buswidth > 1) || (op->addr.buswidth > 1) ||
(op->dummy.buswidth > 1) || (op->data.buswidth > 1))
return false;
tx_len = op->cmd.nbytes + op->addr.nbytes;
if (op->data.dir == SPI_MEM_DATA_OUT) {
// count dummy bytes only if we need to write data after it
tx_len += op->dummy.nbytes;
// leave at least one byte for data
if (tx_len > MTK_NOR_REG_PRGDATA_MAX)
return false;
// if there's no addr, meaning adjust_op_size is impossible,
// check data length as well.
if ((!op->addr.nbytes) &&
(tx_len + op->data.nbytes > MTK_NOR_REG_PRGDATA_MAX + 1))
return false;
} else if (op->data.dir == SPI_MEM_DATA_IN) {
if (tx_len > MTK_NOR_REG_PRGDATA_MAX + 1)
return false;
rx_len = op->data.nbytes;
prg_left = MTK_NOR_PRG_CNT_MAX / 8 - tx_len - op->dummy.nbytes;
if (prg_left > MTK_NOR_REG_SHIFT_MAX + 1)
prg_left = MTK_NOR_REG_SHIFT_MAX + 1;
if (rx_len > prg_left) {
if (!op->addr.nbytes)
return false;
rx_len = prg_left;
}
prg_len = tx_len + op->dummy.nbytes + rx_len;
if (prg_len > MTK_NOR_PRG_CNT_MAX / 8)
return false;
} else {
prg_len = tx_len + op->dummy.nbytes;
if (prg_len > MTK_NOR_PRG_CNT_MAX / 8)
return false;
}
return true;
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
static void mtk_nor_adj_prg_size(struct spi_mem_op *op)
{
int tx_len, tx_left, prg_left;
tx_len = op->cmd.nbytes + op->addr.nbytes;
if (op->data.dir == SPI_MEM_DATA_OUT) {
tx_len += op->dummy.nbytes;
tx_left = MTK_NOR_REG_PRGDATA_MAX + 1 - tx_len;
if (op->data.nbytes > tx_left)
op->data.nbytes = tx_left;
} else if (op->data.dir == SPI_MEM_DATA_IN) {
prg_left = MTK_NOR_PRG_CNT_MAX / 8 - tx_len - op->dummy.nbytes;
if (prg_left > MTK_NOR_REG_SHIFT_MAX + 1)
prg_left = MTK_NOR_REG_SHIFT_MAX + 1;
if (op->data.nbytes > prg_left)
op->data.nbytes = prg_left;
}
}
static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
{
struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (!op->data.nbytes)
return 0;
if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
if ((op->data.dir == SPI_MEM_DATA_IN) &&
mtk_nor_match_read(op)) {
// limit size to prevent timeout calculation overflow
if (op->data.nbytes > 0x400000)
op->data.nbytes = 0x400000;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if ((op->addr.val & MTK_NOR_DMA_ALIGN_MASK) ||
(op->data.nbytes < MTK_NOR_DMA_ALIGN))
op->data.nbytes = 1;
else if (!need_bounce(sp, op))
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
op->data.nbytes &= ~MTK_NOR_DMA_ALIGN_MASK;
else if (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE)
op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE;
return 0;
} else if (op->data.dir == SPI_MEM_DATA_OUT) {
if (op->data.nbytes >= MTK_NOR_PP_SIZE)
op->data.nbytes = MTK_NOR_PP_SIZE;
else
op->data.nbytes = 1;
return 0;
}
}
mtk_nor_adj_prg_size(op);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
return 0;
}
static bool mtk_nor_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
if (!spi_mem_default_supports_op(mem, op))
return false;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (op->cmd.buswidth != 1)
return false;
if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
switch (op->data.dir) {
case SPI_MEM_DATA_IN:
if (mtk_nor_match_read(op))
return true;
break;
case SPI_MEM_DATA_OUT:
if ((op->addr.buswidth == 1) &&
(op->dummy.nbytes == 0) &&
(op->data.buswidth == 1))
return true;
break;
default:
break;
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
return mtk_nor_match_prg(op);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
static void mtk_nor_setup_bus(struct mtk_nor *sp, const struct spi_mem_op *op)
{
u32 reg = 0;
if (op->addr.nbytes == 4)
reg |= MTK_NOR_4B_ADDR;
if (op->data.buswidth == 4) {
reg |= MTK_NOR_QUAD_READ;
writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(4));
if (op->addr.buswidth == 4)
reg |= MTK_NOR_QUAD_ADDR;
} else if (op->data.buswidth == 2) {
reg |= MTK_NOR_DUAL_READ;
writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(3));
if (op->addr.buswidth == 2)
reg |= MTK_NOR_DUAL_ADDR;
} else {
if (op->cmd.opcode == 0x0b)
mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, MTK_NOR_FAST_READ, 0);
else
mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, 0, MTK_NOR_FAST_READ);
}
mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, reg, MTK_NOR_BUS_MODE_MASK);
}
static int mtk_nor_dma_exec(struct mtk_nor *sp, u32 from, unsigned int length,
dma_addr_t dma_addr)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{
int ret = 0;
ulong delay;
u32 reg;
writel(from, sp->base + MTK_NOR_REG_DMA_FADR);
writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR);
writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR);
if (sp->high_dma) {
writel(upper_32_bits(dma_addr),
sp->base + MTK_NOR_REG_DMA_DADR_HB);
writel(upper_32_bits(dma_addr + length),
sp->base + MTK_NOR_REG_DMA_END_DADR_HB);
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (sp->has_irq) {
reinit_completion(&sp->op_done);
mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0);
}
mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0);
delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE);
if (sp->has_irq) {
if (!wait_for_completion_timeout(&sp->op_done,
(delay + 1) * 100))
ret = -ETIMEDOUT;
} else {
ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg,
!(reg & MTK_NOR_DMA_START), delay / 3,
(delay + 1) * 100);
}
if (ret < 0)
dev_err(sp->dev, "dma read timeout.\n");
return ret;
}
static int mtk_nor_read_bounce(struct mtk_nor *sp, const struct spi_mem_op *op)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{
unsigned int rdlen;
int ret;
if (op->data.nbytes & MTK_NOR_DMA_ALIGN_MASK)
rdlen = (op->data.nbytes + MTK_NOR_DMA_ALIGN) & ~MTK_NOR_DMA_ALIGN_MASK;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
else
rdlen = op->data.nbytes;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
ret = mtk_nor_dma_exec(sp, op->addr.val, rdlen, sp->buffer_dma);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (!ret)
memcpy(op->data.buf.in, sp->buffer, op->data.nbytes);
return ret;
}
static int mtk_nor_read_dma(struct mtk_nor *sp, const struct spi_mem_op *op)
{
int ret;
dma_addr_t dma_addr;
if (need_bounce(sp, op))
return mtk_nor_read_bounce(sp, op);
dma_addr = dma_map_single(sp->dev, op->data.buf.in,
op->data.nbytes, DMA_FROM_DEVICE);
if (dma_mapping_error(sp->dev, dma_addr))
return -EINVAL;
ret = mtk_nor_dma_exec(sp, op->addr.val, op->data.nbytes, dma_addr);
dma_unmap_single(sp->dev, dma_addr, op->data.nbytes, DMA_FROM_DEVICE);
return ret;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
static int mtk_nor_read_pio(struct mtk_nor *sp, const struct spi_mem_op *op)
{
u8 *buf = op->data.buf.in;
int ret;
ret = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_READ, 6 * BITS_PER_BYTE);
if (!ret)
buf[0] = readb(sp->base + MTK_NOR_REG_RDATA);
return ret;
}
static int mtk_nor_write_buffer_enable(struct mtk_nor *sp)
{
int ret;
u32 val;
if (sp->wbuf_en)
return 0;
val = readl(sp->base + MTK_NOR_REG_CFG2);
writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2);
ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val,
val & MTK_NOR_WR_BUF_EN, 0, 10000);
if (!ret)
sp->wbuf_en = true;
return ret;
}
static int mtk_nor_write_buffer_disable(struct mtk_nor *sp)
{
int ret;
u32 val;
if (!sp->wbuf_en)
return 0;
val = readl(sp->base + MTK_NOR_REG_CFG2);
writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2);
ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val,
!(val & MTK_NOR_WR_BUF_EN), 0, 10000);
if (!ret)
sp->wbuf_en = false;
return ret;
}
static int mtk_nor_pp_buffered(struct mtk_nor *sp, const struct spi_mem_op *op)
{
const u8 *buf = op->data.buf.out;
u32 val;
int ret, i;
ret = mtk_nor_write_buffer_enable(sp);
if (ret < 0)
return ret;
for (i = 0; i < op->data.nbytes; i += 4) {
val = buf[i + 3] << 24 | buf[i + 2] << 16 | buf[i + 1] << 8 |
buf[i];
writel(val, sp->base + MTK_NOR_REG_PP_DATA);
}
return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE,
(op->data.nbytes + 5) * BITS_PER_BYTE);
}
static int mtk_nor_pp_unbuffered(struct mtk_nor *sp,
const struct spi_mem_op *op)
{
const u8 *buf = op->data.buf.out;
int ret;
ret = mtk_nor_write_buffer_disable(sp);
if (ret < 0)
return ret;
writeb(buf[0], sp->base + MTK_NOR_REG_WDATA);
return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE);
}
static int mtk_nor_spi_mem_prg(struct mtk_nor *sp, const struct spi_mem_op *op)
{
int rx_len = 0;
int reg_offset = MTK_NOR_REG_PRGDATA_MAX;
int tx_len, prg_len;
int i, ret;
void __iomem *reg;
u8 bufbyte;
tx_len = op->cmd.nbytes + op->addr.nbytes;
// count dummy bytes only if we need to write data after it
if (op->data.dir == SPI_MEM_DATA_OUT)
tx_len += op->dummy.nbytes + op->data.nbytes;
else if (op->data.dir == SPI_MEM_DATA_IN)
rx_len = op->data.nbytes;
prg_len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes +
op->data.nbytes;
// an invalid op may reach here if the caller calls exec_op without
// adjust_op_size. return -EINVAL instead of -ENOTSUPP so that
// spi-mem won't try this op again with generic spi transfers.
if ((tx_len > MTK_NOR_REG_PRGDATA_MAX + 1) ||
(rx_len > MTK_NOR_REG_SHIFT_MAX + 1) ||
(prg_len > MTK_NOR_PRG_CNT_MAX / 8))
return -EINVAL;
// fill tx data
for (i = op->cmd.nbytes; i > 0; i--, reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
bufbyte = (op->cmd.opcode >> ((i - 1) * BITS_PER_BYTE)) & 0xff;
writeb(bufbyte, reg);
}
for (i = op->addr.nbytes; i > 0; i--, reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
bufbyte = (op->addr.val >> ((i - 1) * BITS_PER_BYTE)) & 0xff;
writeb(bufbyte, reg);
}
if (op->data.dir == SPI_MEM_DATA_OUT) {
for (i = 0; i < op->dummy.nbytes; i++, reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
writeb(0, reg);
}
for (i = 0; i < op->data.nbytes; i++, reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
writeb(((const u8 *)(op->data.buf.out))[i], reg);
}
}
for (; reg_offset >= 0; reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
writeb(0, reg);
}
// trigger op
if (rx_len)
writel(prg_len * BITS_PER_BYTE + sp->caps->extra_dummy_bit,
sp->base + MTK_NOR_REG_PRG_CNT);
else
writel(prg_len * BITS_PER_BYTE, sp->base + MTK_NOR_REG_PRG_CNT);
ret = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_PROGRAM,
prg_len * BITS_PER_BYTE);
if (ret)
return ret;
// fetch read data
reg_offset = 0;
if (op->data.dir == SPI_MEM_DATA_IN) {
for (i = op->data.nbytes - 1; i >= 0; i--, reg_offset++) {
reg = sp->base + MTK_NOR_REG_SHIFT(reg_offset);
((u8 *)(op->data.buf.in))[i] = readb(reg);
}
}
return 0;
}
static int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{
struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master);
int ret;
if ((op->data.nbytes == 0) ||
((op->addr.nbytes != 3) && (op->addr.nbytes != 4)))
return mtk_nor_spi_mem_prg(sp, op);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (op->data.dir == SPI_MEM_DATA_OUT) {
mtk_nor_set_addr(sp, op);
writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA0);
if (op->data.nbytes == MTK_NOR_PP_SIZE)
return mtk_nor_pp_buffered(sp, op);
return mtk_nor_pp_unbuffered(sp, op);
}
if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) {
ret = mtk_nor_write_buffer_disable(sp);
if (ret < 0)
return ret;
mtk_nor_setup_bus(sp, op);
if (op->data.nbytes == 1) {
mtk_nor_set_addr(sp, op);
return mtk_nor_read_pio(sp, op);
} else {
return mtk_nor_read_dma(sp, op);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
}
return mtk_nor_spi_mem_prg(sp, op);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
static int mtk_nor_setup(struct spi_device *spi)
{
struct mtk_nor *sp = spi_controller_get_devdata(spi->master);
if (spi->max_speed_hz && (spi->max_speed_hz < sp->spi_freq)) {
dev_err(&spi->dev, "spi clock should be %u Hz.\n",
sp->spi_freq);
return -EINVAL;
}
spi->max_speed_hz = sp->spi_freq;
return 0;
}
static int mtk_nor_transfer_one_message(struct spi_controller *master,
struct spi_message *m)
{
struct mtk_nor *sp = spi_controller_get_devdata(master);
struct spi_transfer *t = NULL;
unsigned long trx_len = 0;
int stat = 0;
int reg_offset = MTK_NOR_REG_PRGDATA_MAX;
void __iomem *reg;
const u8 *txbuf;
u8 *rxbuf;
int i;
list_for_each_entry(t, &m->transfers, transfer_list) {
txbuf = t->tx_buf;
for (i = 0; i < t->len; i++, reg_offset--) {
reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
if (txbuf)
writeb(txbuf[i], reg);
else
writeb(0, reg);
}
trx_len += t->len;
}
writel(trx_len * BITS_PER_BYTE, sp->base + MTK_NOR_REG_PRG_CNT);
stat = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_PROGRAM,
trx_len * BITS_PER_BYTE);
if (stat < 0)
goto msg_done;
reg_offset = trx_len - 1;
list_for_each_entry(t, &m->transfers, transfer_list) {
rxbuf = t->rx_buf;
for (i = 0; i < t->len; i++, reg_offset--) {
reg = sp->base + MTK_NOR_REG_SHIFT(reg_offset);
if (rxbuf)
rxbuf[i] = readb(reg);
}
}
m->actual_length = trx_len;
msg_done:
m->status = stat;
spi_finalize_current_message(master);
return 0;
}
static void mtk_nor_disable_clk(struct mtk_nor *sp)
{
clk_disable_unprepare(sp->spi_clk);
clk_disable_unprepare(sp->ctlr_clk);
clk_disable_unprepare(sp->axi_clk);
clk_disable_unprepare(sp->axi_s_clk);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
static int mtk_nor_enable_clk(struct mtk_nor *sp)
{
int ret;
ret = clk_prepare_enable(sp->spi_clk);
if (ret)
return ret;
ret = clk_prepare_enable(sp->ctlr_clk);
if (ret) {
clk_disable_unprepare(sp->spi_clk);
return ret;
}
ret = clk_prepare_enable(sp->axi_clk);
if (ret) {
clk_disable_unprepare(sp->spi_clk);
clk_disable_unprepare(sp->ctlr_clk);
return ret;
}
ret = clk_prepare_enable(sp->axi_s_clk);
if (ret) {
clk_disable_unprepare(sp->spi_clk);
clk_disable_unprepare(sp->ctlr_clk);
clk_disable_unprepare(sp->axi_clk);
return ret;
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
return 0;
}
static void mtk_nor_init(struct mtk_nor *sp)
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{
writel(0, sp->base + MTK_NOR_REG_IRQ_EN);
writel(MTK_NOR_IRQ_MASK, sp->base + MTK_NOR_REG_IRQ_STAT);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
writel(MTK_NOR_ENABLE_SF_CMD, sp->base + MTK_NOR_REG_WP);
mtk_nor_rmw(sp, MTK_NOR_REG_CFG2, MTK_NOR_WR_CUSTOM_OP_EN, 0);
mtk_nor_rmw(sp, MTK_NOR_REG_CFG3,
MTK_NOR_DISABLE_WREN | MTK_NOR_DISABLE_SR_POLL, 0);
}
static irqreturn_t mtk_nor_irq_handler(int irq, void *data)
{
struct mtk_nor *sp = data;
u32 irq_status, irq_enabled;
irq_status = readl(sp->base + MTK_NOR_REG_IRQ_STAT);
irq_enabled = readl(sp->base + MTK_NOR_REG_IRQ_EN);
// write status back to clear interrupt
writel(irq_status, sp->base + MTK_NOR_REG_IRQ_STAT);
if (!(irq_status & irq_enabled))
return IRQ_NONE;
if (irq_status & MTK_NOR_IRQ_DMA) {
complete(&sp->op_done);
writel(0, sp->base + MTK_NOR_REG_IRQ_EN);
}
return IRQ_HANDLED;
}
static size_t mtk_max_msg_size(struct spi_device *spi)
{
return MTK_NOR_PRG_MAX_SIZE;
}
static const struct spi_controller_mem_ops mtk_nor_mem_ops = {
.adjust_op_size = mtk_nor_adjust_op_size,
.supports_op = mtk_nor_supports_op,
.exec_op = mtk_nor_exec_op
};
static const struct mtk_nor_caps mtk_nor_caps_mt8173 = {
.dma_bits = 32,
.extra_dummy_bit = 0,
};
static const struct mtk_nor_caps mtk_nor_caps_mt8186 = {
.dma_bits = 32,
.extra_dummy_bit = 1,
};
static const struct mtk_nor_caps mtk_nor_caps_mt8192 = {
.dma_bits = 36,
.extra_dummy_bit = 0,
};
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
static const struct of_device_id mtk_nor_match[] = {
{ .compatible = "mediatek,mt8173-nor", .data = &mtk_nor_caps_mt8173 },
{ .compatible = "mediatek,mt8186-nor", .data = &mtk_nor_caps_mt8186 },
{ .compatible = "mediatek,mt8192-nor", .data = &mtk_nor_caps_mt8192 },
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mtk_nor_match);
static int mtk_nor_probe(struct platform_device *pdev)
{
struct spi_controller *ctlr;
struct mtk_nor *sp;
struct mtk_nor_caps *caps;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
void __iomem *base;
struct clk *spi_clk, *ctlr_clk, *axi_clk, *axi_s_clk;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
int ret, irq;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
spi_clk = devm_clk_get(&pdev->dev, "spi");
if (IS_ERR(spi_clk))
return PTR_ERR(spi_clk);
ctlr_clk = devm_clk_get(&pdev->dev, "sf");
if (IS_ERR(ctlr_clk))
return PTR_ERR(ctlr_clk);
axi_clk = devm_clk_get_optional(&pdev->dev, "axi");
if (IS_ERR(axi_clk))
return PTR_ERR(axi_clk);
axi_s_clk = devm_clk_get_optional(&pdev->dev, "axi_s");
if (IS_ERR(axi_s_clk))
return PTR_ERR(axi_s_clk);
caps = (struct mtk_nor_caps *)of_device_get_match_data(&pdev->dev);
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(caps->dma_bits));
if (ret) {
dev_err(&pdev->dev, "failed to set dma mask(%u)\n", caps->dma_bits);
return ret;
}
ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*sp));
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (!ctlr) {
dev_err(&pdev->dev, "failed to allocate spi controller\n");
return -ENOMEM;
}
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->max_message_size = mtk_max_msg_size;
ctlr->mem_ops = &mtk_nor_mem_ops;
ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
ctlr->num_chipselect = 1;
ctlr->setup = mtk_nor_setup;
ctlr->transfer_one_message = mtk_nor_transfer_one_message;
ctlr->auto_runtime_pm = true;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
dev_set_drvdata(&pdev->dev, ctlr);
sp = spi_controller_get_devdata(ctlr);
sp->base = base;
sp->has_irq = false;
sp->wbuf_en = false;
sp->ctlr = ctlr;
sp->dev = &pdev->dev;
sp->spi_clk = spi_clk;
sp->ctlr_clk = ctlr_clk;
sp->axi_clk = axi_clk;
sp->axi_s_clk = axi_s_clk;
sp->caps = caps;
sp->high_dma = caps->dma_bits > 32;
sp->buffer = dmam_alloc_coherent(&pdev->dev,
MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN,
&sp->buffer_dma, GFP_KERNEL);
if (!sp->buffer)
return -ENOMEM;
if ((uintptr_t)sp->buffer & MTK_NOR_DMA_ALIGN_MASK) {
dev_err(sp->dev, "misaligned allocation of internal buffer.\n");
return -ENOMEM;
}
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
ret = mtk_nor_enable_clk(sp);
if (ret < 0)
return ret;
sp->spi_freq = clk_get_rate(sp->spi_clk);
mtk_nor_init(sp);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
irq = platform_get_irq_optional(pdev, 0);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
if (irq < 0) {
dev_warn(sp->dev, "IRQ not available.");
} else {
ret = devm_request_irq(sp->dev, irq, mtk_nor_irq_handler, 0,
pdev->name, sp);
if (ret < 0) {
dev_warn(sp->dev, "failed to request IRQ.");
} else {
init_completion(&sp->op_done);
sp->has_irq = true;
}
}
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret < 0)
goto err_probe;
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
dev_info(&pdev->dev, "spi frequency: %d Hz\n", sp->spi_freq);
return 0;
err_probe:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
mtk_nor_disable_clk(sp);
return ret;
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
}
static int mtk_nor_remove(struct platform_device *pdev)
{
struct spi_controller *ctlr = dev_get_drvdata(&pdev->dev);
struct mtk_nor *sp = spi_controller_get_devdata(ctlr);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
mtk_nor_disable_clk(sp);
return 0;
}
static int __maybe_unused mtk_nor_runtime_suspend(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct mtk_nor *sp = spi_controller_get_devdata(ctlr);
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
mtk_nor_disable_clk(sp);
return 0;
}
static int __maybe_unused mtk_nor_runtime_resume(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct mtk_nor *sp = spi_controller_get_devdata(ctlr);
return mtk_nor_enable_clk(sp);
}
static int __maybe_unused mtk_nor_suspend(struct device *dev)
{
return pm_runtime_force_suspend(dev);
}
static int __maybe_unused mtk_nor_resume(struct device *dev)
{
return pm_runtime_force_resume(dev);
}
static const struct dev_pm_ops mtk_nor_pm_ops = {
SET_RUNTIME_PM_OPS(mtk_nor_runtime_suspend,
mtk_nor_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(mtk_nor_suspend, mtk_nor_resume)
};
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
static struct platform_driver mtk_nor_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = mtk_nor_match,
.pm = &mtk_nor_pm_ops,
spi: add support for mediatek spi-nor controller This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06 08:50:50 +00:00
},
.probe = mtk_nor_probe,
.remove = mtk_nor_remove,
};
module_platform_driver(mtk_nor_driver);
MODULE_DESCRIPTION("Mediatek SPI NOR controller driver");
MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRIVER_NAME);