linux/drivers/s390/scsi/zfcp_cfdc.c

447 lines
12 KiB
C
Raw Normal View History

/*
* zfcp device driver
*
* Userspace interface for accessing the
* Access Control Lists / Control File Data Channel;
* handling of response code and states for ports and LUNs.
*
* Copyright IBM Corp. 2008, 2010
*/
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/compat.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
#include "zfcp_def.h"
#include "zfcp_ext.h"
#include "zfcp_fsf.h"
#define ZFCP_CFDC_CMND_DOWNLOAD_NORMAL 0x00010001
#define ZFCP_CFDC_CMND_DOWNLOAD_FORCE 0x00010101
#define ZFCP_CFDC_CMND_FULL_ACCESS 0x00000201
#define ZFCP_CFDC_CMND_RESTRICTED_ACCESS 0x00000401
#define ZFCP_CFDC_CMND_UPLOAD 0x00010002
#define ZFCP_CFDC_DOWNLOAD 0x00000001
#define ZFCP_CFDC_UPLOAD 0x00000002
#define ZFCP_CFDC_WITH_CONTROL_FILE 0x00010000
#define ZFCP_CFDC_IOC_MAGIC 0xDD
#define ZFCP_CFDC_IOC \
_IOWR(ZFCP_CFDC_IOC_MAGIC, 0, struct zfcp_cfdc_data)
/**
* struct zfcp_cfdc_data - data for ioctl cfdc interface
* @signature: request signature
* @devno: FCP adapter device number
* @command: command code
* @fsf_status: returns status of FSF command to userspace
* @fsf_status_qual: returned to userspace
* @payloads: access conflicts list
* @control_file: access control table
*/
struct zfcp_cfdc_data {
u32 signature;
u32 devno;
u32 command;
u32 fsf_status;
u8 fsf_status_qual[FSF_STATUS_QUALIFIER_SIZE];
u8 payloads[256];
u8 control_file[0];
};
static int zfcp_cfdc_copy_from_user(struct scatterlist *sg,
void __user *user_buffer)
{
unsigned int length;
unsigned int size = ZFCP_CFDC_MAX_SIZE;
while (size) {
length = min((unsigned int)size, sg->length);
if (copy_from_user(sg_virt(sg++), user_buffer, length))
return -EFAULT;
user_buffer += length;
size -= length;
}
return 0;
}
static int zfcp_cfdc_copy_to_user(void __user *user_buffer,
struct scatterlist *sg)
{
unsigned int length;
unsigned int size = ZFCP_CFDC_MAX_SIZE;
while (size) {
length = min((unsigned int) size, sg->length);
if (copy_to_user(user_buffer, sg_virt(sg++), length))
return -EFAULT;
user_buffer += length;
size -= length;
}
return 0;
}
static struct zfcp_adapter *zfcp_cfdc_get_adapter(u32 devno)
{
char busid[9];
struct ccw_device *cdev;
struct zfcp_adapter *adapter;
snprintf(busid, sizeof(busid), "0.0.%04x", devno);
cdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
if (!cdev)
return NULL;
adapter = zfcp_ccw_adapter_by_cdev(cdev);
put_device(&cdev->dev);
return adapter;
}
static int zfcp_cfdc_set_fsf(struct zfcp_fsf_cfdc *fsf_cfdc, int command)
{
switch (command) {
case ZFCP_CFDC_CMND_DOWNLOAD_NORMAL:
fsf_cfdc->command = FSF_QTCB_DOWNLOAD_CONTROL_FILE;
fsf_cfdc->option = FSF_CFDC_OPTION_NORMAL_MODE;
break;
case ZFCP_CFDC_CMND_DOWNLOAD_FORCE:
fsf_cfdc->command = FSF_QTCB_DOWNLOAD_CONTROL_FILE;
fsf_cfdc->option = FSF_CFDC_OPTION_FORCE;
break;
case ZFCP_CFDC_CMND_FULL_ACCESS:
fsf_cfdc->command = FSF_QTCB_DOWNLOAD_CONTROL_FILE;
fsf_cfdc->option = FSF_CFDC_OPTION_FULL_ACCESS;
break;
case ZFCP_CFDC_CMND_RESTRICTED_ACCESS:
fsf_cfdc->command = FSF_QTCB_DOWNLOAD_CONTROL_FILE;
fsf_cfdc->option = FSF_CFDC_OPTION_RESTRICTED_ACCESS;
break;
case ZFCP_CFDC_CMND_UPLOAD:
fsf_cfdc->command = FSF_QTCB_UPLOAD_CONTROL_FILE;
fsf_cfdc->option = 0;
break;
default:
return -EINVAL;
}
return 0;
}
static int zfcp_cfdc_sg_setup(int command, struct scatterlist *sg,
u8 __user *control_file)
{
int retval;
retval = zfcp_sg_setup_table(sg, ZFCP_CFDC_PAGES);
if (retval)
return retval;
sg[ZFCP_CFDC_PAGES - 1].length = ZFCP_CFDC_MAX_SIZE % PAGE_SIZE;
if (command & ZFCP_CFDC_WITH_CONTROL_FILE &&
command & ZFCP_CFDC_DOWNLOAD) {
retval = zfcp_cfdc_copy_from_user(sg, control_file);
if (retval) {
zfcp_sg_free_table(sg, ZFCP_CFDC_PAGES);
return -EFAULT;
}
}
return 0;
}
static void zfcp_cfdc_req_to_sense(struct zfcp_cfdc_data *data,
struct zfcp_fsf_req *req)
{
data->fsf_status = req->qtcb->header.fsf_status;
memcpy(&data->fsf_status_qual, &req->qtcb->header.fsf_status_qual,
sizeof(union fsf_status_qual));
memcpy(&data->payloads, &req->qtcb->bottom.support.els,
sizeof(req->qtcb->bottom.support.els));
}
static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
unsigned long arg)
{
struct zfcp_cfdc_data *data;
struct zfcp_cfdc_data __user *data_user;
struct zfcp_adapter *adapter;
struct zfcp_fsf_req *req;
struct zfcp_fsf_cfdc *fsf_cfdc;
int retval;
if (command != ZFCP_CFDC_IOC)
return -ENOTTY;
if (is_compat_task())
data_user = compat_ptr(arg);
else
data_user = (void __user *)arg;
if (!data_user)
return -EINVAL;
fsf_cfdc = kmalloc(sizeof(struct zfcp_fsf_cfdc), GFP_KERNEL);
if (!fsf_cfdc)
return -ENOMEM;
data = memdup_user(data_user, sizeof(*data_user));
if (IS_ERR(data)) {
retval = PTR_ERR(data);
goto no_mem_sense;
}
if (data->signature != 0xCFDCACDF) {
retval = -EINVAL;
goto free_buffer;
}
retval = zfcp_cfdc_set_fsf(fsf_cfdc, data->command);
adapter = zfcp_cfdc_get_adapter(data->devno);
if (!adapter) {
retval = -ENXIO;
goto free_buffer;
}
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
if (retval)
goto adapter_put;
req = zfcp_fsf_control_file(adapter, fsf_cfdc);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto free_sg;
}
if (req->status & ZFCP_STATUS_FSFREQ_ERROR) {
retval = -ENXIO;
goto free_fsf;
}
zfcp_cfdc_req_to_sense(data, req);
retval = copy_to_user(data_user, data, sizeof(*data_user));
if (retval) {
retval = -EFAULT;
goto free_fsf;
}
if (data->command & ZFCP_CFDC_UPLOAD)
retval = zfcp_cfdc_copy_to_user(&data_user->control_file,
fsf_cfdc->sg);
free_fsf:
zfcp_fsf_req_free(req);
free_sg:
zfcp_sg_free_table(fsf_cfdc->sg, ZFCP_CFDC_PAGES);
adapter_put:
zfcp_ccw_adapter_put(adapter);
free_buffer:
kfree(data);
no_mem_sense:
kfree(fsf_cfdc);
return retval;
}
static const struct file_operations zfcp_cfdc_fops = {
.open = nonseekable_open,
.unlocked_ioctl = zfcp_cfdc_dev_ioctl,
#ifdef CONFIG_COMPAT
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.compat_ioctl = zfcp_cfdc_dev_ioctl,
#endif
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.llseek = no_llseek,
};
struct miscdevice zfcp_cfdc_misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = "zfcp_cfdc",
.fops = &zfcp_cfdc_fops,
};
/**
* zfcp_cfdc_adapter_access_changed - Process change in adapter ACT
* @adapter: Adapter where the Access Control Table (ACT) changed
*
* After a change in the adapter ACT, check if access to any
* previously denied resources is now possible.
*/
void zfcp_cfdc_adapter_access_changed(struct zfcp_adapter *adapter)
{
unsigned long flags;
struct zfcp_port *port;
struct scsi_device *sdev;
struct zfcp_scsi_dev *zfcp_sdev;
int status;
if (adapter->connection_features & FSF_FEATURE_NPIV_MODE)
return;
read_lock_irqsave(&adapter->port_list_lock, flags);
list_for_each_entry(port, &adapter->port_list, list) {
status = atomic_read(&port->status);
if ((status & ZFCP_STATUS_COMMON_ACCESS_DENIED) ||
(status & ZFCP_STATUS_COMMON_ACCESS_BOXED))
zfcp_erp_port_reopen(port,
ZFCP_STATUS_COMMON_ERP_FAILED,
"cfaac_1");
}
read_unlock_irqrestore(&adapter->port_list_lock, flags);
shost_for_each_device(sdev, adapter->scsi_host) {
zfcp_sdev = sdev_to_zfcp(sdev);
status = atomic_read(&zfcp_sdev->status);
if ((status & ZFCP_STATUS_COMMON_ACCESS_DENIED) ||
(status & ZFCP_STATUS_COMMON_ACCESS_BOXED))
zfcp_erp_lun_reopen(sdev,
ZFCP_STATUS_COMMON_ERP_FAILED,
"cfaac_2");
}
}
static void zfcp_act_eval_err(struct zfcp_adapter *adapter, u32 table)
{
u16 subtable = table >> 16;
u16 rule = table & 0xffff;
const char *act_type[] = { "unknown", "OS", "WWPN", "DID", "LUN" };
if (subtable && subtable < ARRAY_SIZE(act_type))
dev_warn(&adapter->ccw_device->dev,
"Access denied according to ACT rule type %s, "
"rule %d\n", act_type[subtable], rule);
}
/**
* zfcp_cfdc_port_denied - Process "access denied" for port
* @port: The port where the access has been denied
* @qual: The FSF status qualifier for the access denied FSF status
*/
void zfcp_cfdc_port_denied(struct zfcp_port *port,
union fsf_status_qual *qual)
{
dev_warn(&port->adapter->ccw_device->dev,
"Access denied to port 0x%016Lx\n",
(unsigned long long)port->wwpn);
zfcp_act_eval_err(port->adapter, qual->halfword[0]);
zfcp_act_eval_err(port->adapter, qual->halfword[1]);
zfcp_erp_set_port_status(port,
ZFCP_STATUS_COMMON_ERP_FAILED |
ZFCP_STATUS_COMMON_ACCESS_DENIED);
}
/**
* zfcp_cfdc_lun_denied - Process "access denied" for LUN
* @sdev: The SCSI device / LUN where the access has been denied
* @qual: The FSF status qualifier for the access denied FSF status
*/
void zfcp_cfdc_lun_denied(struct scsi_device *sdev,
union fsf_status_qual *qual)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
dev_warn(&zfcp_sdev->port->adapter->ccw_device->dev,
"Access denied to LUN 0x%016Lx on port 0x%016Lx\n",
zfcp_scsi_dev_lun(sdev),
(unsigned long long)zfcp_sdev->port->wwpn);
zfcp_act_eval_err(zfcp_sdev->port->adapter, qual->halfword[0]);
zfcp_act_eval_err(zfcp_sdev->port->adapter, qual->halfword[1]);
zfcp_erp_set_lun_status(sdev,
ZFCP_STATUS_COMMON_ERP_FAILED |
ZFCP_STATUS_COMMON_ACCESS_DENIED);
atomic_clear_mask(ZFCP_STATUS_LUN_SHARED, &zfcp_sdev->status);
atomic_clear_mask(ZFCP_STATUS_LUN_READONLY, &zfcp_sdev->status);
}
/**
* zfcp_cfdc_lun_shrng_vltn - Evaluate LUN sharing violation status
* @sdev: The LUN / SCSI device where sharing violation occurred
* @qual: The FSF status qualifier from the LUN sharing violation
*/
void zfcp_cfdc_lun_shrng_vltn(struct scsi_device *sdev,
union fsf_status_qual *qual)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
if (qual->word[0])
dev_warn(&zfcp_sdev->port->adapter->ccw_device->dev,
"LUN 0x%Lx on port 0x%Lx is already in "
"use by CSS%d, MIF Image ID %x\n",
zfcp_scsi_dev_lun(sdev),
(unsigned long long)zfcp_sdev->port->wwpn,
qual->fsf_queue_designator.cssid,
qual->fsf_queue_designator.hla);
else
zfcp_act_eval_err(zfcp_sdev->port->adapter, qual->word[2]);
zfcp_erp_set_lun_status(sdev,
ZFCP_STATUS_COMMON_ERP_FAILED |
ZFCP_STATUS_COMMON_ACCESS_DENIED);
atomic_clear_mask(ZFCP_STATUS_LUN_SHARED, &zfcp_sdev->status);
atomic_clear_mask(ZFCP_STATUS_LUN_READONLY, &zfcp_sdev->status);
}
/**
* zfcp_cfdc_open_lun_eval - Eval access ctrl. status for successful "open lun"
* @sdev: The SCSI device / LUN where to evaluate the status
* @bottom: The qtcb bottom with the status from the "open lun"
*
* Returns: 0 if LUN is usable, -EACCES if the access control table
* reports an unsupported configuration.
*/
int zfcp_cfdc_open_lun_eval(struct scsi_device *sdev,
struct fsf_qtcb_bottom_support *bottom)
{
int shared, rw;
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
if ((adapter->connection_features & FSF_FEATURE_NPIV_MODE) ||
!(adapter->adapter_features & FSF_FEATURE_LUN_SHARING) ||
zfcp_ccw_priv_sch(adapter))
return 0;
shared = !(bottom->lun_access_info & FSF_UNIT_ACCESS_EXCLUSIVE);
rw = (bottom->lun_access_info & FSF_UNIT_ACCESS_OUTBOUND_TRANSFER);
if (shared)
atomic_set_mask(ZFCP_STATUS_LUN_SHARED, &zfcp_sdev->status);
if (!rw) {
atomic_set_mask(ZFCP_STATUS_LUN_READONLY, &zfcp_sdev->status);
dev_info(&adapter->ccw_device->dev, "SCSI device at LUN "
"0x%016Lx on port 0x%016Lx opened read-only\n",
zfcp_scsi_dev_lun(sdev),
(unsigned long long)zfcp_sdev->port->wwpn);
}
if (!shared && !rw) {
dev_err(&adapter->ccw_device->dev, "Exclusive read-only access "
"not supported (LUN 0x%016Lx, port 0x%016Lx)\n",
zfcp_scsi_dev_lun(sdev),
(unsigned long long)zfcp_sdev->port->wwpn);
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED);
zfcp_erp_lun_shutdown(sdev, 0, "fsouh_6");
return -EACCES;
}
if (shared && rw) {
dev_err(&adapter->ccw_device->dev,
"Shared read-write access not supported "
"(LUN 0x%016Lx, port 0x%016Lx)\n",
zfcp_scsi_dev_lun(sdev),
(unsigned long long)zfcp_sdev->port->wwpn);
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED);
zfcp_erp_lun_shutdown(sdev, 0, "fsosh_8");
return -EACCES;
}
return 0;
}