linux/arch/arm/boot/dts/dra72-evm.dts

/*
 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "dra72x.dtsi"

/ {
	model = "TI DRA722";
	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1024 MB */
	};
};

&dra7_pmx_core {
	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
		>;
	};

	nand_default: nand_default {
		pinctrl-single,pins = <
			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
		>;
	};

	usb1_pins: pinmux_usb1_pins {
		pinctrl-single,pins = <
			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
		>;
	};

	usb2_pins: pinmux_usb2_pins {
		pinctrl-single,pins = <
			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
		>;
	};
};

&i2c1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	clock-frequency = <400000>;

	tps65917: tps65917@58 {
		compatible = "ti,tps65917";
		reg = <0x58>;

		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
		interrupt-parent = <&gic>;
		interrupt-controller;
		#interrupt-cells = <2>;

		ti,system-power-controller;

		tps65917_pmic {
			compatible = "ti,tps65917-pmic";

			regulators {
				smps1_reg: smps1 {
					/* VDD_MPU */
					regulator-name = "smps1";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1250000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps2_reg: smps2 {
					/* VDD_CORE */
					regulator-name = "smps2";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1030000>;
					regulator-boot-on;
					regulator-always-on;
				};

				smps3_reg: smps3 {
					/* VDD_GPU IVA DSPEVE */
					regulator-name = "smps3";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1250000>;
					regulator-boot-on;
					regulator-always-on;
				};

				smps4_reg: smps4 {
					/* VDDS1V8 */
					regulator-name = "smps4";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps5_reg: smps5 {
					/* VDD_DDR */
					regulator-name = "smps5";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-boot-on;
					regulator-always-on;
				};

				ldo1_reg: ldo1 {
					/* LDO1_OUT --> SDIO  */
					regulator-name = "ldo1";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
					regulator-boot-on;
				};

				ldo2_reg: ldo2 {
					/* LDO2_OUT --> TP1017 (UNUSED)  */
					regulator-name = "ldo2";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo3_reg: ldo3 {
					/* VDDA_1V8_PHY */
					regulator-name = "ldo3";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-boot-on;
					regulator-always-on;
				};

				ldo5_reg: ldo5 {
					/* VDDA_1V8_PLL */
					regulator-name = "ldo5";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo4_reg: ldo4 {
					/* VDDA_3V_USB: VDDA_USBHS33 */
					regulator-name = "ldo4";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-boot-on;
				};
			};
		};
	};
};

&uart1 {
	status = "okay";
};

&elm {
	status = "okay";
};

&gpmc {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&nand_default>;
	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
	nand@0,0 {
		/* To use NAND, DIP switch SW5 must be set like so:
		 * SW5.1 (NAND_SELn) = ON (LOW)
		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
		 */
		reg = <0 0 4>;		/* device IO registers */
		ti,nand-ecc-opt = "bch8";
		ti,elm-id = <&elm>;
		nand-bus-width = <16>;
		gpmc,device-width = <2>;
		gpmc,sync-clk-ps = <0>;
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <80>;
		gpmc,cs-wr-off-ns = <80>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <60>;
		gpmc,adv-wr-off-ns = <60>;
		gpmc,we-on-ns = <10>;
		gpmc,we-off-ns = <50>;
		gpmc,oe-on-ns = <4>;
		gpmc,oe-off-ns = <40>;
		gpmc,access-ns = <40>;
		gpmc,wr-access-ns = <80>;
		gpmc,rd-cycle-ns = <80>;
		gpmc,wr-cycle-ns = <80>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,clk-activation-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,wr-data-mux-bus-ns = <0>;
		/* MTD partition table */
		/* All SPL-* partitions are sized to minimal length
		 * which can be independently programmable. For
		 * NAND flash this is equal to size of erase-block */
		#address-cells = <1>;
		#size-cells = <1>;
		partition@0 {
			label = "NAND.SPL";
			reg = <0x00000000 0x000020000>;
		};
		partition@1 {
			label = "NAND.SPL.backup1";
			reg = <0x00020000 0x00020000>;
		};
		partition@2 {
			label = "NAND.SPL.backup2";
			reg = <0x00040000 0x00020000>;
		};
		partition@3 {
			label = "NAND.SPL.backup3";
			reg = <0x00060000 0x00020000>;
		};
		partition@4 {
			label = "NAND.u-boot-spl-os";
			reg = <0x00080000 0x00040000>;
		};
		partition@5 {
			label = "NAND.u-boot";
			reg = <0x000c0000 0x00100000>;
		};
		partition@6 {
			label = "NAND.u-boot-env";
			reg = <0x001c0000 0x00020000>;
		};
		partition@7 {
			label = "NAND.u-boot-env.backup1";
			reg = <0x001e0000 0x00020000>;
		};
		partition@8 {
			label = "NAND.kernel";
			reg = <0x00200000 0x00800000>;
		};
		partition@9 {
			label = "NAND.file-system";
			reg = <0x00a00000 0x0f600000>;
		};
	};
};

&usb2_phy1 {
	phy-supply = <&ldo4_reg>;
};

&usb2_phy2 {
	phy-supply = <&ldo4_reg>;
};

&usb1 {
	dr_mode = "peripheral";
	pinctrl-names = "default";
	pinctrl-0 = <&usb1_pins>;
};

&usb2 {
	dr_mode = "host";
	pinctrl-names = "default";
	pinctrl-0 = <&usb2_pins>;
};