2008-10-01 07:51:53 +00:00
|
|
|
/*
|
|
|
|
* Driver for the ov9650 sensor
|
|
|
|
*
|
|
|
|
* Copyright (C) 2008 Erik Andren
|
|
|
|
* Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
|
|
|
|
* Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
|
|
|
|
*
|
|
|
|
* Portions of code to USB interface and ALi driver software,
|
|
|
|
* Copyright (c) 2006 Willem Duinker
|
|
|
|
* v4l2 interface modeled after the V4L2 driver
|
|
|
|
* for SN9C10x PC Camera Controllers
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation, version 2.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "m5602_ov9650.h"
|
|
|
|
|
|
|
|
int ov9650_read_sensor(struct sd *sd, const u8 address,
|
|
|
|
u8 *i2c_data, const u8 len)
|
|
|
|
{
|
|
|
|
int err, i;
|
|
|
|
|
|
|
|
/* The ov9650 registers have a max depth of one byte */
|
|
|
|
if (len > 1 || !len)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
do {
|
|
|
|
err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data);
|
|
|
|
} while ((*i2c_data & I2C_BUSY) && !err);
|
|
|
|
|
|
|
|
m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR,
|
|
|
|
ov9650.i2c_slave_id);
|
|
|
|
m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address);
|
|
|
|
m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len);
|
|
|
|
m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08);
|
|
|
|
|
|
|
|
for (i = 0; i < len; i++) {
|
|
|
|
err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));
|
|
|
|
|
|
|
|
PDEBUG(DBG_TRACE, "Reading sensor register "
|
|
|
|
"0x%x containing 0x%x ", address, *i2c_data);
|
|
|
|
}
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_write_sensor(struct sd *sd, const u8 address,
|
|
|
|
u8 *i2c_data, const u8 len)
|
|
|
|
{
|
|
|
|
int err, i;
|
|
|
|
u8 *p;
|
|
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
|
|
|
|
/* The ov9650 only supports one byte writes */
|
|
|
|
if (len > 1 || !len)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
memcpy(buf, sensor_urb_skeleton,
|
|
|
|
sizeof(sensor_urb_skeleton));
|
|
|
|
|
|
|
|
buf[11] = sd->sensor->i2c_slave_id;
|
|
|
|
buf[15] = address;
|
|
|
|
|
|
|
|
/* Special case larger sensor writes */
|
|
|
|
p = buf + 16;
|
|
|
|
|
|
|
|
/* Copy a four byte write sequence for each byte to be written to */
|
|
|
|
for (i = 0; i < len; i++) {
|
|
|
|
memcpy(p, sensor_urb_skeleton + 16, 4);
|
|
|
|
p[3] = i2c_data[i];
|
|
|
|
p += 4;
|
|
|
|
PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x",
|
|
|
|
address, i2c_data[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy the tailer */
|
|
|
|
memcpy(p, sensor_urb_skeleton + 20, 4);
|
|
|
|
|
|
|
|
/* Set the total length */
|
|
|
|
p[3] = 0x10 + len;
|
|
|
|
|
|
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
|
|
0x04, 0x40, 0x19,
|
|
|
|
0x0000, buf,
|
|
|
|
20 + len * 4, M5602_URB_MSG_TIMEOUT);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_probe(struct sd *sd)
|
|
|
|
{
|
|
|
|
u8 prod_id = 0, ver_id = 0, i;
|
|
|
|
|
|
|
|
if (force_sensor) {
|
|
|
|
if (force_sensor == OV9650_SENSOR) {
|
|
|
|
info("Forcing an %s sensor", ov9650.name);
|
|
|
|
goto sensor_found;
|
|
|
|
}
|
|
|
|
/* If we want to force another sensor,
|
|
|
|
don't try to probe this one */
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
info("Probing for an ov9650 sensor");
|
|
|
|
|
|
|
|
/* Run the pre-init to actually probe the unit */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(preinit_ov9650); i++) {
|
|
|
|
u8 data = preinit_ov9650[i][2];
|
|
|
|
if (preinit_ov9650[i][0] == SENSOR)
|
|
|
|
ov9650_write_sensor(sd,
|
|
|
|
preinit_ov9650[i][1], &data, 1);
|
|
|
|
else
|
|
|
|
m5602_write_bridge(sd, preinit_ov9650[i][1], data);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ov9650_read_sensor(sd, OV9650_PID, &prod_id, 1))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (ov9650_read_sensor(sd, OV9650_VER, &ver_id, 1))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if ((prod_id == 0x96) && (ver_id == 0x52)) {
|
|
|
|
info("Detected an ov9650 sensor");
|
|
|
|
goto sensor_found;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
sensor_found:
|
|
|
|
sd->gspca_dev.cam.cam_mode = ov9650.modes;
|
|
|
|
sd->gspca_dev.cam.nmodes = ov9650.nmodes;
|
2008-10-03 18:29:02 +00:00
|
|
|
sd->desc->ctrls = ov9650.ctrls;
|
|
|
|
sd->desc->nctrls = ov9650.nctrls;
|
2008-10-01 07:51:53 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_init(struct sd *sd)
|
|
|
|
{
|
|
|
|
int i, err = 0;
|
|
|
|
u8 data;
|
|
|
|
|
|
|
|
if (dump_sensor)
|
|
|
|
ov9650_dump_registers(sd);
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(init_ov9650) && !err; i++) {
|
|
|
|
data = init_ov9650[i][2];
|
|
|
|
if (init_ov9650[i][0] == SENSOR)
|
|
|
|
err = ov9650_write_sensor(sd, init_ov9650[i][1],
|
|
|
|
&data, 1);
|
|
|
|
else
|
|
|
|
err = m5602_write_bridge(sd, init_ov9650[i][1], data);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!err && dmi_check_system(ov9650_flip_dmi_table)) {
|
|
|
|
info("vflip quirk active");
|
|
|
|
data = 0x30;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_MVFP, &data, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_power_down(struct sd *sd)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(power_down_ov9650); i++) {
|
|
|
|
u8 data = power_down_ov9650[i][2];
|
|
|
|
if (power_down_ov9650[i][0] == SENSOR)
|
|
|
|
ov9650_write_sensor(sd,
|
|
|
|
power_down_ov9650[i][1], &data, 1);
|
|
|
|
else
|
|
|
|
m5602_write_bridge(sd, power_down_ov9650[i][1], data);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
u8 i2c_data;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_COM1, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
*val = i2c_data & 0x03;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_AECH, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
*val |= (i2c_data << 2);
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_AECHM, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
*val |= (i2c_data & 0x3f) << 10;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
u8 i2c_data;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set exposure to %d",
|
|
|
|
val & 0xffff);
|
|
|
|
|
|
|
|
/* The 6 MSBs */
|
|
|
|
i2c_data = (val >> 10) & 0x3f;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_AECHM,
|
|
|
|
&i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* The 8 middle bits */
|
|
|
|
i2c_data = (val >> 2) & 0xff;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_AECH,
|
|
|
|
&i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* The 2 LSBs */
|
|
|
|
i2c_data = val & 0x03;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_COM1, &i2c_data, 1);
|
|
|
|
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
*val = (i2c_data & 0x03) << 8;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1);
|
|
|
|
*val |= i2c_data;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read gain %d", *val);
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
/* The 2 MSB */
|
|
|
|
/* Read the OV9650_VREF register first to avoid
|
|
|
|
corrupting the VREF high and low bits */
|
|
|
|
ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
/* Mask away all uninteresting bits */
|
|
|
|
i2c_data = ((val & 0x0300) >> 2) |
|
|
|
|
(i2c_data & 0x3F);
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
|
|
|
|
/* The 8 LSBs */
|
|
|
|
i2c_data = val & 0xff;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1);
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_RED, &i2c_data, 1);
|
|
|
|
*val = i2c_data;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set red gain to %d",
|
|
|
|
val & 0xff);
|
|
|
|
|
|
|
|
i2c_data = val & 0xff;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_RED, &i2c_data, 1);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_BLUE, &i2c_data, 1);
|
|
|
|
*val = i2c_data;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set blue gain to %d",
|
|
|
|
val & 0xff);
|
|
|
|
|
|
|
|
i2c_data = val & 0xff;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_BLUE, &i2c_data, 1);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
if (dmi_check_system(ov9650_flip_dmi_table))
|
|
|
|
*val = ((i2c_data & OV9650_HFLIP) >> 5) ? 0 : 1;
|
|
|
|
else
|
|
|
|
*val = (i2c_data & OV9650_HFLIP) >> 5;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val);
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (dmi_check_system(ov9650_flip_dmi_table))
|
|
|
|
i2c_data = ((i2c_data & 0xdf) |
|
|
|
|
(((val ? 0 : 1) & 0x01) << 5));
|
|
|
|
else
|
|
|
|
i2c_data = ((i2c_data & 0xdf) |
|
|
|
|
((val & 0x01) << 5));
|
|
|
|
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
if (dmi_check_system(ov9650_flip_dmi_table))
|
|
|
|
*val = ((i2c_data & 0x10) >> 4) ? 0 : 1;
|
|
|
|
else
|
|
|
|
*val = (i2c_data & 0x10) >> 4;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val);
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (dmi_check_system(ov9650_flip_dmi_table))
|
|
|
|
i2c_data = ((i2c_data & 0xef) |
|
|
|
|
(((val ? 0 : 1) & 0x01) << 4));
|
|
|
|
else
|
|
|
|
i2c_data = ((i2c_data & 0xef) |
|
|
|
|
((val & 0x01) << 4));
|
|
|
|
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
*val = (i2c_data & 0x03) << 8;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1);
|
|
|
|
*val |= i2c_data;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read gain %d", *val);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set gain to %d", val & 0x3ff);
|
|
|
|
|
|
|
|
/* Read the OV9650_VREF register first to avoid
|
|
|
|
corrupting the VREF high and low bits */
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Mask away all uninteresting bits */
|
|
|
|
i2c_data = ((val & 0x0300) >> 2) | (i2c_data & 0x3F);
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* The 8 LSBs */
|
|
|
|
i2c_data = val & 0xff;
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1);
|
|
|
|
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
*val = (i2c_data & OV9650_AWB_EN) >> 1;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read auto white balance %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set auto white balance to %d", val);
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1));
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
*val = (i2c_data & OV9650_AGC_EN) >> 2;
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Read auto gain control %d", *val);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u8 i2c_data;
|
|
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
|
|
|
|
PDEBUG(DBG_V4L2_CID, "Set auto gain control to %d", val);
|
|
|
|
err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2));
|
|
|
|
err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1);
|
|
|
|
out:
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ov9650_dump_registers(struct sd *sd)
|
|
|
|
{
|
|
|
|
int address;
|
|
|
|
info("Dumping the ov9650 register state");
|
|
|
|
for (address = 0; address < 0xa9; address++) {
|
|
|
|
u8 value;
|
|
|
|
ov9650_read_sensor(sd, address, &value, 1);
|
|
|
|
info("register 0x%x contains 0x%x",
|
|
|
|
address, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
info("ov9650 register state dump complete");
|
|
|
|
|
|
|
|
info("Probing for which registers that are read/write");
|
|
|
|
for (address = 0; address < 0xff; address++) {
|
|
|
|
u8 old_value, ctrl_value;
|
|
|
|
u8 test_value[2] = {0xff, 0xff};
|
|
|
|
|
|
|
|
ov9650_read_sensor(sd, address, &old_value, 1);
|
|
|
|
ov9650_write_sensor(sd, address, test_value, 1);
|
|
|
|
ov9650_read_sensor(sd, address, &ctrl_value, 1);
|
|
|
|
|
|
|
|
if (ctrl_value == test_value[0])
|
|
|
|
info("register 0x%x is writeable", address);
|
|
|
|
else
|
|
|
|
info("register 0x%x is read only", address);
|
|
|
|
|
|
|
|
/* Restore original value */
|
|
|
|
ov9650_write_sensor(sd, address, &old_value, 1);
|
|
|
|
}
|
|
|
|
}
|