leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
78b81f4666
linux/arch/arm/boot/dts/imx51-babbage.dts

510 lines
12 KiB
Plaintext
Raw Normal View History

arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 00:42:17 +00:00
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
ARM: imx: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 02:49:34 +00:00
#include "imx51.dtsi"
arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 00:42:17 +00:00
/ {
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
memory {
reg = <0x90000000 0x20000000>;
};
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_ipu_disp1>;
ARM: dts: imx51-babbage: Make DVI and WVGA panel functional Currently we get the following errors on imx51-babbage: /display@di0: could not find display-timings node /display@di0: no timings specified /display@di1: could not find display-timings node /display@di1: no timings specified imx-drm imx-drm: failed to allocate buffer with size 0 Provide timing values for IPU1, which is connected to a DVI bridge and to IPU2, which can be connected to the WVGA panel, so that both of them can be functional. While at it, disable the WVGA panel, so that DVI output becomes the default one. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08 18:52:12 +00:00
display-timings {
native-mode = <&timing0>;
timing0: dvi {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
};
};
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
};
ARM: dts: imx51-babbage: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 05:08:46 +00:00
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
display@di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_ipu_disp2>;
ARM: dts: imx51-babbage: Make DVI and WVGA panel functional Currently we get the following errors on imx51-babbage: /display@di0: could not find display-timings node /display@di0: no timings specified /display@di1: could not find display-timings node /display@di1: no timings specified imx-drm imx-drm: failed to allocate buffer with size 0 Provide timing values for IPU1, which is connected to a DVI bridge and to IPU2, which can be connected to the WVGA panel, so that both of them can be functional. While at it, disable the WVGA panel, so that DVI output becomes the default one. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08 18:52:12 +00:00
status = "disabled";
display-timings {
native-mode = <&timing1>;
timing1: claawvga {
clock-frequency = <27000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <40>;
hfront-porch = <60>;
vback-porch = <10>;
vfront-porch = <10>;
hsync-len = <20>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 00:42:17 +00:00
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power Button";
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-19 11:47:27 +00:00
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 00:42:17 +00:00
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
ARM: dts: imx51-babbage: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 05:08:46 +00:00
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx51-babbage-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <3>;
};
ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-10 01:07:47 +00:00
clocks {
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template External high frequency clock CKIH1 is optional for i.MX51, so move it setup into boards where it is used. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-27 07:19:45 +00:00
ckih1 {
clock-frequency = <22579200>;
};
ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-10 01:07:47 +00:00
clk_26M: codec_clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <26000000>;
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-19 11:47:27 +00:00
gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-10 01:07:47 +00:00
};
};
arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 00:42:17 +00:00
};
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
&esdhc1 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_esdhc1>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_esdhc2>;
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-19 11:47:27 +00:00
cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
status = "okay";
};
&uart3 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_uart3>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_ecspi1>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
fsl,spi-num-chipselects = <2>;
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-19 11:47:27 +00:00
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_HIGH>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
ARM: dts: i.MX51 babbage: Add spi-cs-high property to pmic The mc13892 driver knows that it needs spi-cs-high, so the mc13892 will work. The dataflash also connected to this bus though can only be probed when the mc13892 is inactive. Due to driver potential differences in the probe order we can only make sure the mc13892 is inactive when we put the information into the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-25 13:51:59 +00:00
spi-cs-high;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
reg = <0>;
interrupt-parent = <&gpio1>;
ARM: dts: i.MX51: Switch to use standard IRQ flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-07 08:45:08 +00:00
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
regulators {
sw1_reg: sw1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1375000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: sw2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: sw3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
vpll_reg: vpll {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
vdig_reg: vdig {
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
};
vsd_reg: vsd {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3150000>;
};
vusb2_reg: vusb2 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2775000>;
regulator-boot-on;
regulator-always-on;
};
vvideo_reg: vvideo {
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
};
vaudio_reg: vaudio {
regulator-min-microvolt = <2300000>;
regulator-max-microvolt = <3000000>;
};
vcam_reg: vcam {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3000000>;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-always-on;
};
};
};
flash: at45db321d@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <25000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
imx51-babbage {
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
pinctrl_hog: hoggrp {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 02:32:52 +00:00
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
MX51_PAD_GPIO1_5__GPIO1_5 0x100
MX51_PAD_GPIO1_6__GPIO1_6 0x100
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-10 01:07:47 +00:00
MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
>;
};
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
>;
};
pinctrl_esdhc2: esdhc2grp {
fsl,pins = <
MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
>;
};
pinctrl_ipu_disp1: ipudisp1grp {
fsl,pins = <
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
>;
};
pinctrl_ipu_disp2: ipudisp2grp {
fsl,pins = <
MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
MX51_PAD_DI2_PIN2__DI2_PIN2 0x5
MX51_PAD_DI2_PIN3__DI2_PIN3 0x5
MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
MX51_PAD_DI_GP4__DI2_PIN15 0x5
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
MX51_PAD_KEY_COL0__KEY_COL0 0xe8
MX51_PAD_KEY_COL1__KEY_COL1 0xe8
MX51_PAD_KEY_COL2__KEY_COL2 0xe8
MX51_PAD_KEY_COL3__KEY_COL3 0xe8
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX51_PAD_EIM_D25__UART3_RXD 0x1c5
MX51_PAD_EIM_D26__UART3_TXD 0x1c5
MX51_PAD_EIM_D27__UART3_RTS 0x1c5
MX51_PAD_EIM_D24__UART3_CTS 0x1c5
>;
};
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
};
};
&uart1 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_uart1>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_uart2>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_i2c2>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-10 01:07:47 +00:00
clocks = <&clk_26M>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
};
&audmux {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_audmux>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
status = "okay";
};
&fec {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_fec>;
ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:32:48 +00:00
phy-mode = "mii";
status = "okay";
};
ARM i.MX51 babbage: Add keypad support The keypad is on the accessory board of i.MX51 babbage main board and is driven by Keypad Port(KPP) in SoC. The keymap is the same to i.MX25 3stack platform as the accessory board schematic tells that it is designed in this way. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-03 12:37:34 +00:00
&kpp {
pinctrl-names = "default";
ARM: dts: imx51: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-04 08:05:37 +00:00
pinctrl-0 = <&pinctrl_kpp>;
ARM i.MX51 babbage: Add keypad support The keypad is on the accessory board of i.MX51 babbage main board and is driven by Keypad Port(KPP) in SoC. The keymap is the same to i.MX25 3stack platform as the accessory board schematic tells that it is designed in this way. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-03 12:37:34 +00:00
linux,keymap = <0x00000067 /* KEY_UP */
0x0001006c /* KEY_DOWN */
0x00020072 /* KEY_VOLUMEDOWN */
0x00030066 /* KEY_HOME */
0x0100006a /* KEY_RIGHT */
0x01010069 /* KEY_LEFT */
0x0102001c /* KEY_ENTER */
0x01030073 /* KEY_VOLUMEUP */
0x02000040 /* KEY_F6 */
0x02010042 /* KEY_F8 */
0x02020043 /* KEY_F9 */
0x02030044 /* KEY_F10 */
0x0300003b /* KEY_F1 */
0x0301003c /* KEY_F2 */
0x0302003d /* KEY_F3 */
0x03030074>; /* KEY_POWER */
status = "okay";
};
Reference in New Issue Copy Permalink