2014-04-06 15:57:20 +00:00
|
|
|
Kernel driver nct6683
|
|
|
|
|
=====================
|
|
|
|
|
|
|
|
|
|
Supported chips:
|
2019-04-17 09:46:28 +00:00
|
|
|
|
2020-12-02 02:50:57 +00:00
|
|
|
* Nuvoton NCT6683D/NCT6687D
|
2019-04-17 09:46:28 +00:00
|
|
|
|
2014-04-06 15:57:20 +00:00
|
|
|
Prefix: 'nct6683'
|
2019-04-17 09:46:28 +00:00
|
|
|
|
2014-04-06 15:57:20 +00:00
|
|
|
Addresses scanned: ISA address retrieved from Super I/O registers
|
2019-04-17 09:46:28 +00:00
|
|
|
|
2014-04-06 15:57:20 +00:00
|
|
|
Datasheet: Available from Nuvoton upon request
|
|
|
|
|
|
|
|
|
|
Authors:
|
2019-04-17 09:46:28 +00:00
|
|
|
|
|
|
|
|
Guenter Roeck <linux@roeck-us.net>
|
2014-04-06 15:57:20 +00:00
|
|
|
|
|
|
|
|
Description
|
|
|
|
|
-----------
|
|
|
|
|
|
|
|
|
|
This driver implements support for the Nuvoton NCT6683D eSIO chip.
|
|
|
|
|
|
|
|
|
|
The chips implement up to shared 32 temperature and voltage sensors.
|
|
|
|
|
It supports up to 16 fan rotation sensors and up to 8 fan control engines.
|
|
|
|
|
|
|
|
|
|
Temperatures are measured in degrees Celsius. Measurement resolution is
|
|
|
|
|
0.5 degrees C.
|
|
|
|
|
|
|
|
|
|
Voltage sensors (also known as IN sensors) report their values in millivolts.
|
|
|
|
|
|
|
|
|
|
Fan rotation speeds are reported in RPM (rotations per minute).
|
|
|
|
|
|
|
|
|
|
Usage Note
|
|
|
|
|
----------
|
|
|
|
|
|
|
|
|
|
Limit register locations on Intel boards with EC firmware version 1.0
|
|
|
|
|
build date 04/03/13 do not match the register locations in the Nuvoton
|
|
|
|
|
datasheet. Nuvoton confirms that Intel uses a special firmware version
|
|
|
|
|
with different register addresses. The specification describing the Intel
|
|
|
|
|
firmware is held under NDA by Nuvoton and Intel and not available
|
|
|
|
|
to the public.
|
|
|
|
|
|
|
|
|
|
Some of the register locations can be reverse engineered; others are too
|
|
|
|
|
well hidden. Given this, writing any values from the operating system is
|
|
|
|
|
considered too risky with this firmware and has been disabled. All limits
|
|
|
|
|
must all be written from the BIOS.
|
|
|
|
|
|
|
|
|
|
The driver has only been tested with the Intel firmware, and by default
|
|
|
|
|
only instantiates on Intel boards. To enable it on non-Intel boards,
|
|
|
|
|
set the 'force' module parameter to 1.
|
|
|
|
|
|
|
|
|
|
Tested Boards and Firmware Versions
|
|
|
|
|
-----------------------------------
|
|
|
|
|
|
|
|
|
|
The driver has been reported to work with the following boards and
|
|
|
|
|
firmware versions.
|
|
|
|
|
|
2019-04-17 09:46:28 +00:00
|
|
|
=============== ===============================================
|
2014-04-06 15:57:20 +00:00
|
|
|
Board Firmware version
|
2019-04-17 09:46:28 +00:00
|
|
|
=============== ===============================================
|
2014-04-06 15:57:20 +00:00
|
|
|
Intel DH87RL NCT6683D EC firmware version 1.0 build 04/03/13
|
|
|
|
|
Intel DH87MC NCT6683D EC firmware version 1.0 build 04/03/13
|
|
|
|
|
Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13
|
2021-01-19 05:12:41 +00:00
|
|
|
ASRock X570 NCT6683D EC firmware version 1.0 build 06/28/19
|
2020-12-02 02:50:57 +00:00
|
|
|
MSI B550 NCT6687D EC firmware version 1.0 build 05/07/20
|
2019-04-17 09:46:28 +00:00
|
|
|
=============== ===============================================
|
