2019-06-04 08:11:33 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2010-10-05 14:52:45 +00:00
|
|
|
/*
|
2017-06-16 19:45:33 +00:00
|
|
|
* V4L2 subdevice driver for OmniVision OV6650 Camera Sensor
|
2010-10-05 14:52:45 +00:00
|
|
|
*
|
|
|
|
* Copyright (C) 2010 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
|
|
|
|
*
|
|
|
|
* Based on OmniVision OV96xx Camera Driver
|
|
|
|
* Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
|
|
|
|
*
|
|
|
|
* Based on ov772x camera driver:
|
|
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
|
|
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
|
|
|
|
*
|
|
|
|
* Based on ov7670 and soc_camera_platform driver,
|
|
|
|
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
|
|
|
|
* Copyright (C) 2008 Magnus Damm
|
|
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
|
|
|
|
*
|
2019-02-18 19:28:58 +00:00
|
|
|
* Hardware specific bits initially based on former work by Matt Callow
|
2010-10-05 14:52:45 +00:00
|
|
|
* drivers/media/video/omap/sensor_ov6650.c
|
|
|
|
* Copyright (C) 2006 Matt Callow
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/slab.h>
|
2011-09-09 16:56:04 +00:00
|
|
|
#include <linux/v4l2-mediabus.h>
|
2011-07-03 18:03:12 +00:00
|
|
|
#include <linux/module.h>
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2012-12-21 16:01:55 +00:00
|
|
|
#include <media/v4l2-clk.h>
|
2011-09-12 12:52:01 +00:00
|
|
|
#include <media/v4l2-ctrls.h>
|
2017-06-16 19:45:33 +00:00
|
|
|
#include <media/v4l2-device.h>
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
/* Register definitions */
|
|
|
|
#define REG_GAIN 0x00 /* range 00 - 3F */
|
|
|
|
#define REG_BLUE 0x01
|
|
|
|
#define REG_RED 0x02
|
|
|
|
#define REG_SAT 0x03 /* [7:4] saturation [0:3] reserved */
|
|
|
|
#define REG_HUE 0x04 /* [7:6] rsrvd [5] hue en [4:0] hue */
|
|
|
|
|
|
|
|
#define REG_BRT 0x06
|
|
|
|
|
|
|
|
#define REG_PIDH 0x0a
|
|
|
|
#define REG_PIDL 0x0b
|
|
|
|
|
|
|
|
#define REG_AECH 0x10
|
|
|
|
#define REG_CLKRC 0x11 /* Data Format and Internal Clock */
|
|
|
|
/* [7:6] Input system clock (MHz)*/
|
|
|
|
/* 00=8, 01=12, 10=16, 11=24 */
|
|
|
|
/* [5:0]: Internal Clock Pre-Scaler */
|
|
|
|
#define REG_COMA 0x12 /* [7] Reset */
|
|
|
|
#define REG_COMB 0x13
|
|
|
|
#define REG_COMC 0x14
|
|
|
|
#define REG_COMD 0x15
|
|
|
|
#define REG_COML 0x16
|
|
|
|
#define REG_HSTRT 0x17
|
|
|
|
#define REG_HSTOP 0x18
|
|
|
|
#define REG_VSTRT 0x19
|
|
|
|
#define REG_VSTOP 0x1a
|
|
|
|
#define REG_PSHFT 0x1b
|
|
|
|
#define REG_MIDH 0x1c
|
|
|
|
#define REG_MIDL 0x1d
|
|
|
|
#define REG_HSYNS 0x1e
|
|
|
|
#define REG_HSYNE 0x1f
|
|
|
|
#define REG_COME 0x20
|
|
|
|
#define REG_YOFF 0x21
|
|
|
|
#define REG_UOFF 0x22
|
|
|
|
#define REG_VOFF 0x23
|
|
|
|
#define REG_AEW 0x24
|
|
|
|
#define REG_AEB 0x25
|
|
|
|
#define REG_COMF 0x26
|
|
|
|
#define REG_COMG 0x27
|
|
|
|
#define REG_COMH 0x28
|
|
|
|
#define REG_COMI 0x29
|
|
|
|
|
|
|
|
#define REG_FRARL 0x2b
|
|
|
|
#define REG_COMJ 0x2c
|
|
|
|
#define REG_COMK 0x2d
|
|
|
|
#define REG_AVGY 0x2e
|
|
|
|
#define REG_REF0 0x2f
|
|
|
|
#define REG_REF1 0x30
|
|
|
|
#define REG_REF2 0x31
|
|
|
|
#define REG_FRAJH 0x32
|
|
|
|
#define REG_FRAJL 0x33
|
|
|
|
#define REG_FACT 0x34
|
|
|
|
#define REG_L1AEC 0x35
|
|
|
|
#define REG_AVGU 0x36
|
|
|
|
#define REG_AVGV 0x37
|
|
|
|
|
|
|
|
#define REG_SPCB 0x60
|
|
|
|
#define REG_SPCC 0x61
|
|
|
|
#define REG_GAM1 0x62
|
|
|
|
#define REG_GAM2 0x63
|
|
|
|
#define REG_GAM3 0x64
|
|
|
|
#define REG_SPCD 0x65
|
|
|
|
|
|
|
|
#define REG_SPCE 0x68
|
|
|
|
#define REG_ADCL 0x69
|
|
|
|
|
|
|
|
#define REG_RMCO 0x6c
|
|
|
|
#define REG_GMCO 0x6d
|
|
|
|
#define REG_BMCO 0x6e
|
|
|
|
|
|
|
|
|
|
|
|
/* Register bits, values, etc. */
|
|
|
|
#define OV6650_PIDH 0x66 /* high byte of product ID number */
|
|
|
|
#define OV6650_PIDL 0x50 /* low byte of product ID number */
|
|
|
|
#define OV6650_MIDH 0x7F /* high byte of mfg ID */
|
|
|
|
#define OV6650_MIDL 0xA2 /* low byte of mfg ID */
|
|
|
|
|
|
|
|
#define DEF_GAIN 0x00
|
|
|
|
#define DEF_BLUE 0x80
|
|
|
|
#define DEF_RED 0x80
|
|
|
|
|
|
|
|
#define SAT_SHIFT 4
|
|
|
|
#define SAT_MASK (0xf << SAT_SHIFT)
|
|
|
|
#define SET_SAT(x) (((x) << SAT_SHIFT) & SAT_MASK)
|
|
|
|
|
|
|
|
#define HUE_EN BIT(5)
|
|
|
|
#define HUE_MASK 0x1f
|
|
|
|
#define DEF_HUE 0x10
|
|
|
|
#define SET_HUE(x) (HUE_EN | ((x) & HUE_MASK))
|
|
|
|
|
|
|
|
#define DEF_AECH 0x4D
|
|
|
|
|
|
|
|
#define CLKRC_6MHz 0x00
|
|
|
|
#define CLKRC_12MHz 0x40
|
|
|
|
#define CLKRC_16MHz 0x80
|
|
|
|
#define CLKRC_24MHz 0xc0
|
|
|
|
#define CLKRC_DIV_MASK 0x3f
|
|
|
|
#define GET_CLKRC_DIV(x) (((x) & CLKRC_DIV_MASK) + 1)
|
2019-10-13 12:50:45 +00:00
|
|
|
#define DEF_CLKRC 0x00
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
#define COMA_RESET BIT(7)
|
|
|
|
#define COMA_QCIF BIT(5)
|
|
|
|
#define COMA_RAW_RGB BIT(4)
|
|
|
|
#define COMA_RGB BIT(3)
|
|
|
|
#define COMA_BW BIT(2)
|
|
|
|
#define COMA_WORD_SWAP BIT(1)
|
|
|
|
#define COMA_BYTE_SWAP BIT(0)
|
|
|
|
#define DEF_COMA 0x00
|
|
|
|
|
|
|
|
#define COMB_FLIP_V BIT(7)
|
|
|
|
#define COMB_FLIP_H BIT(5)
|
|
|
|
#define COMB_BAND_FILTER BIT(4)
|
|
|
|
#define COMB_AWB BIT(2)
|
|
|
|
#define COMB_AGC BIT(1)
|
|
|
|
#define COMB_AEC BIT(0)
|
|
|
|
#define DEF_COMB 0x5f
|
|
|
|
|
|
|
|
#define COML_ONE_CHANNEL BIT(7)
|
|
|
|
|
|
|
|
#define DEF_HSTRT 0x24
|
|
|
|
#define DEF_HSTOP 0xd4
|
|
|
|
#define DEF_VSTRT 0x04
|
|
|
|
#define DEF_VSTOP 0x94
|
|
|
|
|
|
|
|
#define COMF_HREF_LOW BIT(4)
|
|
|
|
|
|
|
|
#define COMJ_PCLK_RISING BIT(4)
|
|
|
|
#define COMJ_VSYNC_HIGH BIT(0)
|
|
|
|
|
|
|
|
/* supported resolutions */
|
|
|
|
#define W_QCIF (DEF_HSTOP - DEF_HSTRT)
|
|
|
|
#define W_CIF (W_QCIF << 1)
|
|
|
|
#define H_QCIF (DEF_VSTOP - DEF_VSTRT)
|
|
|
|
#define H_CIF (H_QCIF << 1)
|
|
|
|
|
|
|
|
#define FRAME_RATE_MAX 30
|
|
|
|
|
|
|
|
|
|
|
|
struct ov6650_reg {
|
|
|
|
u8 reg;
|
|
|
|
u8 val;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov6650 {
|
|
|
|
struct v4l2_subdev subdev;
|
2011-09-12 12:52:01 +00:00
|
|
|
struct v4l2_ctrl_handler hdl;
|
|
|
|
struct {
|
|
|
|
/* exposure/autoexposure cluster */
|
|
|
|
struct v4l2_ctrl *autoexposure;
|
|
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
};
|
|
|
|
struct {
|
|
|
|
/* gain/autogain cluster */
|
|
|
|
struct v4l2_ctrl *autogain;
|
|
|
|
struct v4l2_ctrl *gain;
|
|
|
|
};
|
|
|
|
struct {
|
|
|
|
/* blue/red/autowhitebalance cluster */
|
|
|
|
struct v4l2_ctrl *autowb;
|
|
|
|
struct v4l2_ctrl *blue;
|
|
|
|
struct v4l2_ctrl *red;
|
|
|
|
};
|
2012-12-21 16:01:55 +00:00
|
|
|
struct v4l2_clk *clk;
|
2010-10-05 14:52:45 +00:00
|
|
|
bool half_scale; /* scale down output by 2 */
|
|
|
|
struct v4l2_rect rect; /* sensor cropping window */
|
2018-01-22 09:00:45 +00:00
|
|
|
struct v4l2_fract tpf; /* as requested with s_frame_interval */
|
2014-11-10 17:28:29 +00:00
|
|
|
u32 code;
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
2014-11-10 17:28:29 +00:00
|
|
|
static u32 ov6650_codes[] = {
|
|
|
|
MEDIA_BUS_FMT_YUYV8_2X8,
|
|
|
|
MEDIA_BUS_FMT_UYVY8_2X8,
|
|
|
|
MEDIA_BUS_FMT_YVYU8_2X8,
|
|
|
|
MEDIA_BUS_FMT_VYUY8_2X8,
|
|
|
|
MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
|
|
MEDIA_BUS_FMT_Y8_1X8,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
media: ov6650: Fix some format attributes not under control
User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values. The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.
Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.
Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-03 20:11:40 +00:00
|
|
|
static const struct v4l2_mbus_framefmt ov6650_def_fmt = {
|
|
|
|
.width = W_CIF,
|
|
|
|
.height = H_CIF,
|
|
|
|
.code = MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
|
|
.colorspace = V4L2_COLORSPACE_SRGB,
|
|
|
|
.field = V4L2_FIELD_NONE,
|
|
|
|
.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
|
|
|
|
.quantization = V4L2_QUANTIZATION_DEFAULT,
|
|
|
|
.xfer_func = V4L2_XFER_FUNC_DEFAULT,
|
|
|
|
};
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
/* read a register */
|
|
|
|
static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u8 data = reg;
|
|
|
|
struct i2c_msg msg = {
|
|
|
|
.addr = client->addr,
|
|
|
|
.flags = 0,
|
|
|
|
.len = 1,
|
|
|
|
.buf = &data,
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
msg.flags = I2C_M_RD;
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
*val = data;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err:
|
|
|
|
dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* write a register */
|
|
|
|
static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
unsigned char data[2] = { reg, val };
|
|
|
|
struct i2c_msg msg = {
|
|
|
|
.addr = client->addr,
|
|
|
|
.flags = 0,
|
|
|
|
.len = 2,
|
|
|
|
.buf = data,
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Read a register, alter its bits, write it back */
|
|
|
|
static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask)
|
|
|
|
{
|
|
|
|
u8 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = ov6650_reg_read(client, reg, &val);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev,
|
|
|
|
"[Read]-Modify-Write of register 0x%02x failed!\n",
|
|
|
|
reg);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
val &= ~mask;
|
|
|
|
val |= set;
|
|
|
|
|
|
|
|
ret = ov6650_reg_write(client, reg, val);
|
|
|
|
if (ret)
|
|
|
|
dev_err(&client->dev,
|
|
|
|
"Read-Modify-[Write] of register 0x%02x failed!\n",
|
|
|
|
reg);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ov6650 *to_ov6650(const struct i2c_client *client)
|
|
|
|
{
|
|
|
|
return container_of(i2c_get_clientdata(client), struct ov6650, subdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Start/Stop streaming from the device */
|
|
|
|
static int ov6650_s_stream(struct v4l2_subdev *sd, int enable)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get status of additional camera capabilities */
|
2011-09-12 12:52:01 +00:00
|
|
|
static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2011-09-12 12:52:01 +00:00
|
|
|
struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
|
|
|
|
struct v4l2_subdev *sd = &priv->subdev;
|
2010-10-05 14:52:45 +00:00
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
2011-09-12 12:52:01 +00:00
|
|
|
uint8_t reg, reg2;
|
2011-09-12 11:25:25 +00:00
|
|
|
int ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_AUTOGAIN:
|
2011-09-12 12:52:01 +00:00
|
|
|
ret = ov6650_reg_read(client, REG_GAIN, ®);
|
|
|
|
if (!ret)
|
|
|
|
priv->gain->val = reg;
|
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
2011-09-12 12:52:01 +00:00
|
|
|
ret = ov6650_reg_read(client, REG_BLUE, ®);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_read(client, REG_RED, ®2);
|
|
|
|
if (!ret) {
|
|
|
|
priv->blue->val = reg;
|
|
|
|
priv->red->val = reg2;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
2011-09-12 12:52:01 +00:00
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
2011-09-12 12:52:01 +00:00
|
|
|
ret = ov6650_reg_read(client, REG_AECH, ®);
|
|
|
|
if (!ret)
|
|
|
|
priv->exposure->val = reg;
|
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
2011-09-12 12:52:01 +00:00
|
|
|
return -EINVAL;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Set status of additional camera capabilities */
|
2011-09-12 12:52:01 +00:00
|
|
|
static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2011-09-12 12:52:01 +00:00
|
|
|
struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
|
|
|
|
struct v4l2_subdev *sd = &priv->subdev;
|
2010-10-05 14:52:45 +00:00
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
2011-09-12 11:25:25 +00:00
|
|
|
int ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_AUTOGAIN:
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMB,
|
2011-09-12 12:52:01 +00:00
|
|
|
ctrl->val ? COMB_AGC : 0, COMB_AGC);
|
|
|
|
if (!ret && !ctrl->val)
|
|
|
|
ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
|
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMB,
|
2011-09-12 12:52:01 +00:00
|
|
|
ctrl->val ? COMB_AWB : 0, COMB_AWB);
|
|
|
|
if (!ret && !ctrl->val) {
|
|
|
|
ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_write(client, REG_RED,
|
|
|
|
priv->red->val);
|
|
|
|
}
|
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_SATURATION:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
|
2010-10-05 14:52:45 +00:00
|
|
|
SAT_MASK);
|
|
|
|
case V4L2_CID_HUE:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
|
2010-10-05 14:52:45 +00:00
|
|
|
HUE_MASK);
|
|
|
|
case V4L2_CID_BRIGHTNESS:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_write(client, REG_BRT, ctrl->val);
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
2011-09-12 11:25:25 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
|
|
|
|
V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
|
2011-09-12 12:52:01 +00:00
|
|
|
if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
|
|
|
|
ret = ov6650_reg_write(client, REG_AECH,
|
|
|
|
priv->exposure->val);
|
|
|
|
return ret;
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_GAMMA:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_write(client, REG_GAM1, ctrl->val);
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_VFLIP:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_rmw(client, REG_COMB,
|
|
|
|
ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
|
2010-10-05 14:52:45 +00:00
|
|
|
case V4L2_CID_HFLIP:
|
2011-09-12 12:52:01 +00:00
|
|
|
return ov6650_reg_rmw(client, REG_COMB,
|
|
|
|
ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
2011-09-12 12:52:01 +00:00
|
|
|
return -EINVAL;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
static int ov6650_get_register(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_dbg_register *reg)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
int ret;
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
if (reg->reg & ~0xff)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
reg->size = 1;
|
|
|
|
|
|
|
|
ret = ov6650_reg_read(client, reg->reg, &val);
|
|
|
|
if (!ret)
|
|
|
|
reg->val = (__u64)val;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov6650_set_register(struct v4l2_subdev *sd,
|
2013-03-24 11:28:46 +00:00
|
|
|
const struct v4l2_dbg_register *reg)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
|
|
|
|
if (reg->reg & ~0xff || reg->val & ~0xff)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return ov6650_reg_write(client, reg->reg, reg->val);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2012-07-20 13:19:50 +00:00
|
|
|
static int ov6650_s_power(struct v4l2_subdev *sd, int on)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
2012-12-21 16:01:55 +00:00
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
2017-06-16 19:45:33 +00:00
|
|
|
int ret = 0;
|
2012-07-20 13:19:50 +00:00
|
|
|
|
2017-06-16 19:45:33 +00:00
|
|
|
if (on)
|
|
|
|
ret = v4l2_clk_enable(priv->clk);
|
|
|
|
else
|
|
|
|
v4l2_clk_disable(priv->clk);
|
|
|
|
|
|
|
|
return ret;
|
2012-07-20 13:19:50 +00:00
|
|
|
}
|
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
static int ov6650_get_selection(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
|
|
struct v4l2_subdev_selection *sel)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
|
|
return -EINVAL;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
switch (sel->target) {
|
|
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
|
|
sel->r.left = DEF_HSTRT << 1;
|
|
|
|
sel->r.top = DEF_VSTRT << 1;
|
|
|
|
sel->r.width = W_CIF;
|
|
|
|
sel->r.height = H_CIF;
|
|
|
|
return 0;
|
|
|
|
case V4L2_SEL_TGT_CROP:
|
|
|
|
sel->r = priv->rect;
|
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
static int ov6650_set_selection(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
|
|
struct v4l2_subdev_selection *sel)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
int ret;
|
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
|
|
|
|
sel->target != V4L2_SEL_TGT_CROP)
|
2010-10-05 14:52:45 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2019-09-03 20:11:38 +00:00
|
|
|
v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
|
|
|
|
&sel->r.height, 2, H_CIF, 1, 0);
|
|
|
|
v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
|
|
|
|
(DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
|
|
|
|
&sel->r.top, DEF_VSTRT << 1,
|
|
|
|
(DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
|
|
|
|
1, 0);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2019-09-03 20:11:38 +00:00
|
|
|
ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
|
2010-10-05 14:52:45 +00:00
|
|
|
if (!ret) {
|
2019-09-03 20:11:44 +00:00
|
|
|
priv->rect.width += priv->rect.left - sel->r.left;
|
2019-09-03 20:11:38 +00:00
|
|
|
priv->rect.left = sel->r.left;
|
2010-10-05 14:52:45 +00:00
|
|
|
ret = ov6650_reg_write(client, REG_HSTOP,
|
2019-09-03 20:11:38 +00:00
|
|
|
(sel->r.left + sel->r.width) >> 1);
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
if (!ret) {
|
2019-09-03 20:11:38 +00:00
|
|
|
priv->rect.width = sel->r.width;
|
|
|
|
ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
if (!ret) {
|
2019-09-03 20:11:44 +00:00
|
|
|
priv->rect.height += priv->rect.top - sel->r.top;
|
2019-09-03 20:11:38 +00:00
|
|
|
priv->rect.top = sel->r.top;
|
2010-10-05 14:52:45 +00:00
|
|
|
ret = ov6650_reg_write(client, REG_VSTOP,
|
2019-09-03 20:11:38 +00:00
|
|
|
(sel->r.top + sel->r.height) >> 1);
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
if (!ret)
|
2019-09-03 20:11:38 +00:00
|
|
|
priv->rect.height = sel->r.height;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-04-09 07:02:34 +00:00
|
|
|
static int ov6650_get_fmt(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
|
|
struct v4l2_subdev_format *format)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2015-04-09 07:02:34 +00:00
|
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
2010-10-05 14:52:45 +00:00
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
|
2015-04-09 07:02:34 +00:00
|
|
|
if (format->pad)
|
|
|
|
return -EINVAL;
|
|
|
|
|
media: ov6650: Fix some format attributes not under control
User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values. The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.
Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.
Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-03 20:11:40 +00:00
|
|
|
/* initialize response with default media bus frame format */
|
|
|
|
*mf = ov6650_def_fmt;
|
|
|
|
|
|
|
|
/* update media bus format code and frame size */
|
2019-09-03 20:11:41 +00:00
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
|
|
mf->width = cfg->try_fmt.width;
|
|
|
|
mf->height = cfg->try_fmt.height;
|
|
|
|
mf->code = cfg->try_fmt.code;
|
|
|
|
|
|
|
|
} else {
|
|
|
|
mf->width = priv->rect.width >> priv->half_scale;
|
|
|
|
mf->height = priv->rect.height >> priv->half_scale;
|
|
|
|
mf->code = priv->code;
|
|
|
|
}
|
2010-10-05 14:52:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
|
|
|
|
{
|
2010-11-02 16:14:36 +00:00
|
|
|
return width > rect->width >> 1 || height > rect->height >> 1;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
2019-10-13 12:50:47 +00:00
|
|
|
#define to_clkrc(div) ((div) - 1)
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
/* set the format we will capture in */
|
|
|
|
static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
|
2015-12-14 10:25:32 +00:00
|
|
|
struct v4l2_subdev_selection sel = {
|
|
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
|
|
.target = V4L2_SEL_TGT_CROP,
|
|
|
|
.r.left = priv->rect.left + (priv->rect.width >> 1) -
|
|
|
|
(mf->width >> (1 - half_scale)),
|
|
|
|
.r.top = priv->rect.top + (priv->rect.height >> 1) -
|
|
|
|
(mf->height >> (1 - half_scale)),
|
|
|
|
.r.width = mf->width << half_scale,
|
|
|
|
.r.height = mf->height << half_scale,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
2014-11-10 17:28:29 +00:00
|
|
|
u32 code = mf->code;
|
2019-10-13 12:50:48 +00:00
|
|
|
u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask;
|
2010-10-05 14:52:45 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* select color matrix configuration for given color encoding */
|
|
|
|
switch (code) {
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_Y8_1X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format GREY8_1X8\n");
|
|
|
|
coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP;
|
|
|
|
coma_set |= COMA_BW;
|
|
|
|
break;
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n");
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP;
|
|
|
|
coma_set |= COMA_WORD_SWAP;
|
|
|
|
break;
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n");
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP |
|
|
|
|
COMA_BYTE_SWAP;
|
|
|
|
break;
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n");
|
|
|
|
if (half_scale) {
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
|
|
|
|
coma_set |= COMA_BYTE_SWAP;
|
|
|
|
} else {
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW;
|
|
|
|
coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
|
|
}
|
|
|
|
break;
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n");
|
|
|
|
if (half_scale) {
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW;
|
|
|
|
coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
|
|
} else {
|
|
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
|
|
|
|
coma_set |= COMA_BYTE_SWAP;
|
|
|
|
}
|
|
|
|
break;
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n");
|
|
|
|
coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
|
|
coma_set |= COMA_RAW_RGB | COMA_RGB;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-11-10 17:28:29 +00:00
|
|
|
if (code == MEDIA_BUS_FMT_Y8_1X8 ||
|
|
|
|
code == MEDIA_BUS_FMT_SBGGR8_1X8) {
|
2010-10-05 14:52:45 +00:00
|
|
|
coml_mask = COML_ONE_CHANNEL;
|
|
|
|
coml_set = 0;
|
|
|
|
} else {
|
|
|
|
coml_mask = 0;
|
|
|
|
coml_set = COML_ONE_CHANNEL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (half_scale) {
|
|
|
|
dev_dbg(&client->dev, "max resolution: QCIF\n");
|
|
|
|
coma_set |= COMA_QCIF;
|
|
|
|
} else {
|
|
|
|
dev_dbg(&client->dev, "max resolution: CIF\n");
|
|
|
|
coma_mask |= COMA_QCIF;
|
|
|
|
}
|
|
|
|
|
2015-12-14 10:25:32 +00:00
|
|
|
ret = ov6650_set_selection(sd, NULL, &sel);
|
2010-10-05 14:52:45 +00:00
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
|
2019-09-03 20:11:43 +00:00
|
|
|
if (!ret) {
|
|
|
|
priv->half_scale = half_scale;
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask);
|
2019-09-03 20:11:43 +00:00
|
|
|
}
|
|
|
|
if (!ret)
|
|
|
|
priv->code = code;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-04-09 09:24:36 +00:00
|
|
|
static int ov6650_set_fmt(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
|
|
struct v4l2_subdev_format *format)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2015-04-09 09:24:36 +00:00
|
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
2010-10-05 14:52:45 +00:00
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
|
2015-04-09 09:24:36 +00:00
|
|
|
if (format->pad)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
if (is_unscaled_ok(mf->width, mf->height, &priv->rect))
|
|
|
|
v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
|
|
|
|
&mf->height, 2, H_CIF, 1, 0);
|
|
|
|
|
|
|
|
switch (mf->code) {
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_Y10_1X10:
|
|
|
|
mf->code = MEDIA_BUS_FMT_Y8_1X8;
|
2017-05-18 11:13:28 +00:00
|
|
|
/* fall through */
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_Y8_1X8:
|
|
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
|
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
|
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
break;
|
|
|
|
default:
|
2014-11-10 17:28:29 +00:00
|
|
|
mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
|
2017-05-18 11:13:28 +00:00
|
|
|
/* fall through */
|
2014-11-10 17:28:29 +00:00
|
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
2010-10-05 14:52:45 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
media: ov6650: Fix some format attributes not under control
User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values. The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.
Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.
Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-03 20:11:40 +00:00
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
|
|
/* store media bus format code and frame size in pad config */
|
|
|
|
cfg->try_fmt.width = mf->width;
|
|
|
|
cfg->try_fmt.height = mf->height;
|
|
|
|
cfg->try_fmt.code = mf->code;
|
2015-04-09 09:24:36 +00:00
|
|
|
|
media: ov6650: Fix some format attributes not under control
User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values. The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.
Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.
Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-03 20:11:40 +00:00
|
|
|
/* return default mbus frame format updated with pad config */
|
|
|
|
*mf = ov6650_def_fmt;
|
|
|
|
mf->width = cfg->try_fmt.width;
|
|
|
|
mf->height = cfg->try_fmt.height;
|
|
|
|
mf->code = cfg->try_fmt.code;
|
|
|
|
|
|
|
|
} else {
|
|
|
|
/* apply new media bus format code and frame size */
|
|
|
|
int ret = ov6650_s_fmt(sd, mf);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* return default format updated with active size and code */
|
|
|
|
*mf = ov6650_def_fmt;
|
|
|
|
mf->width = priv->rect.width >> priv->half_scale;
|
|
|
|
mf->height = priv->rect.height >> priv->half_scale;
|
|
|
|
mf->code = priv->code;
|
|
|
|
}
|
2010-10-05 14:52:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-04-09 07:01:33 +00:00
|
|
|
static int ov6650_enum_mbus_code(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2015-04-09 07:01:33 +00:00
|
|
|
if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes))
|
2010-10-05 14:52:45 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2015-04-09 07:01:33 +00:00
|
|
|
code->code = ov6650_codes[code->index];
|
2010-10-05 14:52:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-22 09:00:45 +00:00
|
|
|
static int ov6650_g_frame_interval(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_frame_interval *ival)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
|
2019-10-13 12:50:47 +00:00
|
|
|
ival->interval = priv->tpf;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
dev_dbg(&client->dev, "Frame interval: %u/%u s\n",
|
2018-01-22 09:00:45 +00:00
|
|
|
ival->interval.numerator, ival->interval.denominator);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-22 09:00:45 +00:00
|
|
|
static int ov6650_s_frame_interval(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_subdev_frame_interval *ival)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
2018-01-22 09:00:45 +00:00
|
|
|
struct v4l2_fract *tpf = &ival->interval;
|
2010-10-05 14:52:45 +00:00
|
|
|
int div, ret;
|
|
|
|
|
|
|
|
if (tpf->numerator == 0 || tpf->denominator == 0)
|
|
|
|
div = 1; /* Reset to full rate */
|
|
|
|
else
|
|
|
|
div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator;
|
|
|
|
|
|
|
|
if (div == 0)
|
|
|
|
div = 1;
|
|
|
|
else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK))
|
|
|
|
div = GET_CLKRC_DIV(CLKRC_DIV_MASK);
|
|
|
|
|
2019-10-13 12:50:47 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_CLKRC, to_clkrc(div), CLKRC_DIV_MASK);
|
2010-10-05 14:52:45 +00:00
|
|
|
if (!ret) {
|
2019-10-13 12:50:47 +00:00
|
|
|
priv->tpf.numerator = div;
|
2019-10-13 12:50:45 +00:00
|
|
|
priv->tpf.denominator = FRAME_RATE_MAX;
|
|
|
|
|
|
|
|
*tpf = priv->tpf;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Soft reset the camera. This has nothing to do with the RESET pin! */
|
|
|
|
static int ov6650_reset(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
dev_dbg(&client->dev, "reset\n");
|
|
|
|
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
|
|
|
|
if (ret)
|
|
|
|
dev_err(&client->dev,
|
2011-03-31 01:57:33 +00:00
|
|
|
"An error occurred while entering soft reset!\n");
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* program default register values */
|
|
|
|
static int ov6650_prog_dflt(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
dev_dbg(&client->dev, "initializing\n");
|
|
|
|
|
|
|
|
ret = ov6650_reg_write(client, REG_COMA, 0); /* ~COMA_RESET */
|
2019-10-13 12:50:48 +00:00
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_write(client, REG_CLKRC, CLKRC_12MHz);
|
2010-10-05 14:52:45 +00:00
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-03-30 01:06:10 +00:00
|
|
|
static int ov6650_video_probe(struct v4l2_subdev *sd)
|
2010-10-05 14:52:45 +00:00
|
|
|
{
|
2019-03-30 01:06:10 +00:00
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
2012-07-18 13:54:04 +00:00
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
2010-10-05 14:52:45 +00:00
|
|
|
u8 pidh, pidl, midh, midl;
|
2012-07-18 13:54:04 +00:00
|
|
|
int ret;
|
|
|
|
|
2019-03-30 01:06:09 +00:00
|
|
|
priv->clk = v4l2_clk_get(&client->dev, NULL);
|
|
|
|
if (IS_ERR(priv->clk)) {
|
|
|
|
ret = PTR_ERR(priv->clk);
|
|
|
|
dev_err(&client->dev, "v4l2_clk request err: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-03-30 01:06:10 +00:00
|
|
|
ret = ov6650_s_power(sd, 1);
|
2012-07-18 13:54:04 +00:00
|
|
|
if (ret < 0)
|
2019-03-30 01:06:09 +00:00
|
|
|
goto eclkput;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2019-03-25 00:21:12 +00:00
|
|
|
msleep(20);
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
/*
|
|
|
|
* check and show product ID and manufacturer ID
|
|
|
|
*/
|
|
|
|
ret = ov6650_reg_read(client, REG_PIDH, &pidh);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_read(client, REG_PIDL, &pidl);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_read(client, REG_MIDH, &midh);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_reg_read(client, REG_MIDL, &midl);
|
|
|
|
|
|
|
|
if (ret)
|
2012-07-18 13:54:04 +00:00
|
|
|
goto done;
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) {
|
|
|
|
dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n",
|
|
|
|
pidh, pidl);
|
2012-07-18 13:54:04 +00:00
|
|
|
ret = -ENODEV;
|
|
|
|
goto done;
|
2010-10-05 14:52:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dev_info(&client->dev,
|
|
|
|
"ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n",
|
|
|
|
pidh, pidl, midh, midl);
|
|
|
|
|
|
|
|
ret = ov6650_reset(client);
|
|
|
|
if (!ret)
|
|
|
|
ret = ov6650_prog_dflt(client);
|
2019-09-03 20:11:42 +00:00
|
|
|
if (!ret) {
|
|
|
|
struct v4l2_mbus_framefmt mf = ov6650_def_fmt;
|
|
|
|
|
|
|
|
ret = ov6650_s_fmt(sd, &mf);
|
|
|
|
}
|
2012-07-18 13:54:04 +00:00
|
|
|
if (!ret)
|
|
|
|
ret = v4l2_ctrl_handler_setup(&priv->hdl);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2012-07-18 13:54:04 +00:00
|
|
|
done:
|
2019-03-30 01:06:10 +00:00
|
|
|
ov6650_s_power(sd, 0);
|
2019-03-30 01:06:09 +00:00
|
|
|
if (!ret)
|
|
|
|
return 0;
|
|
|
|
eclkput:
|
|
|
|
v4l2_clk_put(priv->clk);
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2011-09-12 12:52:01 +00:00
|
|
|
static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
|
|
|
|
.g_volatile_ctrl = ov6550_g_volatile_ctrl,
|
|
|
|
.s_ctrl = ov6550_s_ctrl,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
2016-12-12 13:59:42 +00:00
|
|
|
static const struct v4l2_subdev_core_ops ov6650_core_ops = {
|
2010-10-05 14:52:45 +00:00
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
.g_register = ov6650_get_register,
|
|
|
|
.s_register = ov6650_set_register,
|
|
|
|
#endif
|
2012-07-20 13:19:50 +00:00
|
|
|
.s_power = ov6650_s_power,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
2011-07-28 17:42:25 +00:00
|
|
|
/* Request bus settings on camera side */
|
2011-07-26 15:02:00 +00:00
|
|
|
static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
|
|
|
|
struct v4l2_mbus_config *cfg)
|
|
|
|
{
|
|
|
|
|
|
|
|
cfg->flags = V4L2_MBUS_MASTER |
|
|
|
|
V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
|
|
|
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
|
|
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
|
|
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH;
|
|
|
|
cfg->type = V4L2_MBUS_PARALLEL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-07-28 17:42:25 +00:00
|
|
|
/* Alter bus settings on camera side */
|
2011-07-26 15:02:00 +00:00
|
|
|
static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
|
|
|
|
const struct v4l2_mbus_config *cfg)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
int ret;
|
|
|
|
|
2017-06-16 19:45:33 +00:00
|
|
|
if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
|
2011-07-26 15:02:00 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
|
|
|
|
else
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2017-06-16 19:45:33 +00:00
|
|
|
if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
|
2011-07-26 15:02:00 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
|
|
|
|
else
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2017-06-16 19:45:33 +00:00
|
|
|
if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
|
2011-07-26 15:02:00 +00:00
|
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
|
|
|
|
else
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-12-12 13:59:42 +00:00
|
|
|
static const struct v4l2_subdev_video_ops ov6650_video_ops = {
|
2010-10-05 14:52:45 +00:00
|
|
|
.s_stream = ov6650_s_stream,
|
2018-01-22 09:00:45 +00:00
|
|
|
.g_frame_interval = ov6650_g_frame_interval,
|
|
|
|
.s_frame_interval = ov6650_s_frame_interval,
|
2011-07-26 15:02:00 +00:00
|
|
|
.g_mbus_config = ov6650_g_mbus_config,
|
|
|
|
.s_mbus_config = ov6650_s_mbus_config,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
2015-04-09 07:01:33 +00:00
|
|
|
static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
|
|
|
|
.enum_mbus_code = ov6650_enum_mbus_code,
|
2015-12-14 10:25:32 +00:00
|
|
|
.get_selection = ov6650_get_selection,
|
|
|
|
.set_selection = ov6650_set_selection,
|
2015-04-09 07:02:34 +00:00
|
|
|
.get_fmt = ov6650_get_fmt,
|
2015-04-09 09:24:36 +00:00
|
|
|
.set_fmt = ov6650_set_fmt,
|
2015-04-09 07:01:33 +00:00
|
|
|
};
|
|
|
|
|
2016-12-12 13:59:42 +00:00
|
|
|
static const struct v4l2_subdev_ops ov6650_subdev_ops = {
|
2010-10-05 14:52:45 +00:00
|
|
|
.core = &ov6650_core_ops,
|
|
|
|
.video = &ov6650_video_ops,
|
2015-04-09 07:01:33 +00:00
|
|
|
.pad = &ov6650_pad_ops,
|
2010-10-05 14:52:45 +00:00
|
|
|
};
|
|
|
|
|
2019-03-30 01:06:10 +00:00
|
|
|
static const struct v4l2_subdev_internal_ops ov6650_internal_ops = {
|
|
|
|
.registered = ov6650_video_probe,
|
|
|
|
};
|
|
|
|
|
2010-10-05 14:52:45 +00:00
|
|
|
/*
|
|
|
|
* i2c_driver function
|
|
|
|
*/
|
|
|
|
static int ov6650_probe(struct i2c_client *client,
|
|
|
|
const struct i2c_device_id *did)
|
|
|
|
{
|
|
|
|
struct ov6650 *priv;
|
|
|
|
int ret;
|
|
|
|
|
2012-12-21 13:28:43 +00:00
|
|
|
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
|
2017-09-02 14:07:31 +00:00
|
|
|
if (!priv)
|
2010-10-05 14:52:45 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
|
2011-09-12 12:52:01 +00:00
|
|
|
v4l2_ctrl_handler_init(&priv->hdl, 13);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
|
|
priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
|
|
|
|
priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
|
|
|
|
priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
|
|
|
|
priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
|
|
|
|
priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
|
|
|
|
priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
|
2011-09-12 11:25:25 +00:00
|
|
|
&ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
|
|
|
|
V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
|
2011-09-12 12:52:01 +00:00
|
|
|
priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
|
|
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
|
|
V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
|
|
|
|
|
|
|
|
priv->subdev.ctrl_handler = &priv->hdl;
|
2019-09-03 20:11:37 +00:00
|
|
|
if (priv->hdl.error) {
|
|
|
|
ret = priv->hdl.error;
|
|
|
|
goto ectlhdlfree;
|
|
|
|
}
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2011-09-12 12:52:01 +00:00
|
|
|
v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
|
|
|
|
v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
|
|
|
|
v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
|
|
|
|
V4L2_EXPOSURE_MANUAL, true);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
priv->rect.left = DEF_HSTRT << 1;
|
|
|
|
priv->rect.top = DEF_VSTRT << 1;
|
|
|
|
priv->rect.width = W_CIF;
|
|
|
|
priv->rect.height = H_CIF;
|
|
|
|
|
2019-10-13 12:50:45 +00:00
|
|
|
/* Hardware default frame interval */
|
|
|
|
priv->tpf.numerator = GET_CLKRC_DIV(DEF_CLKRC);
|
|
|
|
priv->tpf.denominator = FRAME_RATE_MAX;
|
|
|
|
|
2019-03-30 01:06:10 +00:00
|
|
|
priv->subdev.internal_ops = &ov6650_internal_ops;
|
|
|
|
|
|
|
|
ret = v4l2_async_register_subdev(&priv->subdev);
|
2019-09-03 20:11:37 +00:00
|
|
|
if (!ret)
|
|
|
|
return 0;
|
|
|
|
ectlhdlfree:
|
|
|
|
v4l2_ctrl_handler_free(&priv->hdl);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov6650_remove(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
|
2012-12-21 16:01:55 +00:00
|
|
|
v4l2_clk_put(priv->clk);
|
2019-03-30 01:06:10 +00:00
|
|
|
v4l2_async_unregister_subdev(&priv->subdev);
|
2011-09-12 12:52:01 +00:00
|
|
|
v4l2_ctrl_handler_free(&priv->hdl);
|
2010-10-05 14:52:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct i2c_device_id ov6650_id[] = {
|
|
|
|
{ "ov6650", 0 },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, ov6650_id);
|
|
|
|
|
|
|
|
static struct i2c_driver ov6650_i2c_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "ov6650",
|
|
|
|
},
|
|
|
|
.probe = ov6650_probe,
|
|
|
|
.remove = ov6650_remove,
|
|
|
|
.id_table = ov6650_id,
|
|
|
|
};
|
|
|
|
|
2012-02-12 09:56:32 +00:00
|
|
|
module_i2c_driver(ov6650_i2c_driver);
|
2010-10-05 14:52:45 +00:00
|
|
|
|
2019-09-03 20:11:36 +00:00
|
|
|
MODULE_DESCRIPTION("V4L2 subdevice driver for OmniVision OV6650 camera sensor");
|
|
|
|
MODULE_AUTHOR("Janusz Krzysztofik <jmkrzyszt@gmail.com");
|
2010-10-05 14:52:45 +00:00
|
|
|
MODULE_LICENSE("GPL v2");
|