2014-03-12 09:43:38 +00:00
|
|
|
/*
|
|
|
|
* at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
|
|
|
|
*
|
|
|
|
* Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
|
|
*
|
|
|
|
* Licensed under GPLv2 or later.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/pinctrl/at91.h>
|
2014-03-12 09:43:43 +00:00
|
|
|
#include <dt-bindings/clk/at91.h>
|
2014-03-12 09:43:38 +00:00
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Atmel AT91SAM9RL family SoC";
|
|
|
|
compatible = "atmel,at91sam9rl", "atmel,at91sam9";
|
|
|
|
interrupt-parent = <&aic>;
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
serial0 = &dbgu;
|
|
|
|
serial1 = &usart0;
|
|
|
|
serial2 = &usart1;
|
|
|
|
serial3 = &usart2;
|
|
|
|
serial4 = &usart3;
|
|
|
|
gpio0 = &pioA;
|
|
|
|
gpio1 = &pioB;
|
|
|
|
gpio2 = &pioC;
|
|
|
|
gpio3 = &pioD;
|
|
|
|
tcb0 = &tcb0;
|
|
|
|
i2c0 = &i2c0;
|
|
|
|
i2c1 = &i2c1;
|
|
|
|
ssc0 = &ssc0;
|
|
|
|
ssc1 = &ssc1;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
#address-cells = <0>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
cpu {
|
|
|
|
compatible = "arm,arm926ej-s";
|
|
|
|
device_type = "cpu";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
memory {
|
|
|
|
reg = <0x20000000 0x04000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ahb {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
|
|
|
|
nand0: nand@40000000 {
|
|
|
|
compatible = "atmel,at91rm9200-nand";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
reg = <0x40000000 0x10000000>,
|
|
|
|
<0xffffe800 0x200>;
|
|
|
|
atmel,nand-addr-offset = <21>;
|
|
|
|
atmel,nand-cmd-offset = <22>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
|
|
gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
|
|
|
|
<&pioB 6 GPIO_ACTIVE_HIGH>,
|
|
|
|
<0>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
apb {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
|
|
|
|
tcb0: timer@fffa0000 {
|
|
|
|
compatible = "atmel,at91rm9200-tcb";
|
|
|
|
reg = <0xfffa0000 0x100>;
|
|
|
|
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
|
|
|
|
<17 IRQ_TYPE_LEVEL_HIGH 0>,
|
|
|
|
<18 IRQ_TYPE_LEVEL_HIGH 0>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
|
|
|
|
clock-names = "t0_clk", "t1_clk", "t2_clk";
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
mmc0: mmc@fffa4000 {
|
|
|
|
compatible = "atmel,hsmci";
|
|
|
|
reg = <0xfffa4000 0x600>;
|
|
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&mci0_clk>;
|
|
|
|
clock-names = "mci_clk";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c0: i2c@fffa8000 {
|
|
|
|
compatible = "atmel,at91sam9260-i2c";
|
|
|
|
reg = <0xfffa8000 0x100>;
|
|
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&twi0_clk>;
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c1: i2c@fffac000 {
|
|
|
|
compatible = "atmel,at91sam9260-i2c";
|
|
|
|
reg = <0xfffac000 0x100>;
|
|
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
usart0: serial@fffb0000 {
|
|
|
|
compatible = "atmel,at91sam9260-usart";
|
|
|
|
reg = <0xfffb0000 0x200>;
|
|
|
|
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
atmel,use-dma-rx;
|
|
|
|
atmel,use-dma-tx;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usart0>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&usart0_clk>;
|
|
|
|
clock-names = "usart";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
usart1: serial@fffb4000 {
|
|
|
|
compatible = "atmel,at91sam9260-usart";
|
|
|
|
reg = <0xfffb4000 0x200>;
|
|
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
atmel,use-dma-rx;
|
|
|
|
atmel,use-dma-tx;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usart1>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&usart1_clk>;
|
|
|
|
clock-names = "usart";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
usart2: serial@fffb8000 {
|
|
|
|
compatible = "atmel,at91sam9260-usart";
|
|
|
|
reg = <0xfffb8000 0x200>;
|
|
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
atmel,use-dma-rx;
|
|
|
|
atmel,use-dma-tx;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usart2>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&usart2_clk>;
|
|
|
|
clock-names = "usart";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
usart3: serial@fffbc000 {
|
|
|
|
compatible = "atmel,at91sam9260-usart";
|
|
|
|
reg = <0xfffbc000 0x200>;
|
|
|
|
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
atmel,use-dma-rx;
|
|
|
|
atmel,use-dma-tx;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usart3>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&usart3_clk>;
|
|
|
|
clock-names = "usart";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc0: ssc@fffc0000 {
|
|
|
|
compatible = "atmel,at91rm9200-ssc";
|
|
|
|
reg = <0xfffc0000 0x4000>;
|
|
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc1: ssc@fffc4000 {
|
|
|
|
compatible = "atmel,at91rm9200-ssc";
|
|
|
|
reg = <0xfffc4000 0x4000>;
|
|
|
|
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
spi0: spi@fffcc000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
compatible = "atmel,at91rm9200-spi";
|
|
|
|
reg = <0xfffcc000 0x200>;
|
|
|
|
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_spi0>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&spi0_clk>;
|
|
|
|
clock-names = "spi_clk";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
ramc0: ramc@ffffea00 {
|
|
|
|
compatible = "atmel,at91sam9260-sdramc";
|
|
|
|
reg = <0xffffea00 0x200>;
|
|
|
|
};
|
|
|
|
|
|
|
|
aic: interrupt-controller@fffff000 {
|
|
|
|
#interrupt-cells = <3>;
|
|
|
|
compatible = "atmel,at91rm9200-aic";
|
|
|
|
interrupt-controller;
|
|
|
|
reg = <0xfffff000 0x200>;
|
|
|
|
atmel,external-irqs = <31>;
|
|
|
|
};
|
|
|
|
|
|
|
|
dbgu: serial@fffff200 {
|
|
|
|
compatible = "atmel,at91sam9260-usart";
|
|
|
|
reg = <0xfffff200 0x200>;
|
|
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_dbgu>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&mck>;
|
|
|
|
clock-names = "usart";
|
2014-03-12 09:43:38 +00:00
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl@fffff400 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
|
|
|
|
ranges = <0xfffff400 0xfffff400 0x800>;
|
|
|
|
|
|
|
|
atmel,mux-mask =
|
|
|
|
/* A B */
|
|
|
|
<0xffffffff 0xe05c6738>, /* pioA */
|
|
|
|
<0xffffffff 0x0000c780>, /* pioB */
|
|
|
|
<0xffffffff 0xe3ffff0e>, /* pioC */
|
|
|
|
<0x003fffff 0x0001ff3c>; /* pioD */
|
|
|
|
|
|
|
|
/* shared pinctrl settings */
|
|
|
|
dbgu {
|
|
|
|
pinctrl_dbgu: dbgu-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c_gpio0 {
|
|
|
|
pinctrl_i2c_gpio0: i2c_gpio0-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
|
|
|
|
<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c_gpio1 {
|
|
|
|
pinctrl_i2c_gpio1: i2c_gpio1-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
|
|
|
|
<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc0 {
|
|
|
|
pinctrl_mmc0_clk: mmc0_clk-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
nand {
|
|
|
|
pinctrl_nand: nand-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_nand0_ale_cle: nand_ale_cle-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_nand0_oe_we: nand_oe_we-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_nand0_cs: nand_cs-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc0 {
|
|
|
|
pinctrl_ssc0_tx: ssc0_tx-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ssc0_rx: ssc0_rx-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc1 {
|
|
|
|
pinctrl_ssc1_tx: ssc1_tx-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ssc1_rx: ssc1_rx-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
spi0 {
|
|
|
|
pinctrl_spi0: spi0-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
tcb0 {
|
|
|
|
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
|
|
|
|
atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
|
|
|
|
atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
|
|
|
|
atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
|
|
|
|
atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
|
|
|
|
atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
|
|
|
|
atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
|
|
|
|
atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
|
|
|
|
atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
|
|
|
|
atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
usart0 {
|
|
|
|
pinctrl_usart0: usart0-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_rts: usart0_rts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_cts: usart0_cts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
|
|
|
|
<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_dcd: usart0_dcd-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_ri: usart0_ri-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart0_sck: usart0_sck-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
usart1 {
|
|
|
|
pinctrl_usart1: usart1-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart1_rts: usart1_rts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart1_cts: usart1_cts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart1_sck: usart1_sck-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
usart2 {
|
|
|
|
pinctrl_usart2: usart2-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart2_rts: usart2_rts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart2_cts: usart2_cts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart2_sck: usart2_sck-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
usart3 {
|
|
|
|
pinctrl_usart3: usart3-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
|
|
|
|
<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart3_rts: usart3_rts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart3_cts: usart3_cts-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usart3_sck: usart3_sck-0 {
|
|
|
|
atmel,pins =
|
|
|
|
<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pioA: gpio@fffff400 {
|
|
|
|
compatible = "atmel,at91rm9200-gpio";
|
|
|
|
reg = <0xfffff400 0x200>;
|
|
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-controller;
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&pioA_clk>;
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
pioB: gpio@fffff600 {
|
|
|
|
compatible = "atmel,at91rm9200-gpio";
|
|
|
|
reg = <0xfffff600 0x200>;
|
|
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-controller;
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&pioB_clk>;
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
pioC: gpio@fffff800 {
|
|
|
|
compatible = "atmel,at91rm9200-gpio";
|
|
|
|
reg = <0xfffff800 0x200>;
|
|
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-controller;
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&pioC_clk>;
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
pioD: gpio@fffffa00 {
|
|
|
|
compatible = "atmel,at91rm9200-gpio";
|
|
|
|
reg = <0xfffffa00 0x200>;
|
|
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-controller;
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&pioD_clk>;
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pmc: pmc@fffffc00 {
|
2014-03-12 09:43:43 +00:00
|
|
|
compatible = "atmel,at91sam9g45-pmc";
|
2014-03-12 09:43:38 +00:00
|
|
|
reg = <0xfffffc00 0x100>;
|
2014-03-12 09:43:43 +00:00
|
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
|
|
interrupt-controller;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
|
|
|
clk32k: slck {
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
};
|
|
|
|
|
|
|
|
main: mainck {
|
|
|
|
compatible = "atmel,at91rm9200-clk-main";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
|
|
|
|
clocks = <&clk32k>;
|
|
|
|
};
|
|
|
|
|
|
|
|
plla: pllack {
|
|
|
|
compatible = "atmel,at91rm9200-clk-pll";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
interrupts-extended = <&pmc AT91_PMC_LOCKA>;
|
|
|
|
clocks = <&main>;
|
|
|
|
reg = <0>;
|
|
|
|
atmel,clk-input-range = <1000000 32000000>;
|
|
|
|
#atmel,pll-clk-output-range-cells = <4>;
|
|
|
|
atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
utmi: utmick {
|
|
|
|
compatible = "atmel,at91sam9x5-clk-utmi";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
interrupt-parent = <&pmc>;
|
|
|
|
interrupts = <AT91_PMC_LOCKU>;
|
|
|
|
clocks = <&main>;
|
|
|
|
};
|
|
|
|
|
|
|
|
mck: masterck {
|
|
|
|
compatible = "atmel,at91rm9200-clk-master";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
|
|
|
|
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
|
|
|
|
atmel,clk-output-range = <0 94000000>;
|
|
|
|
atmel,clk-divisors = <1 2 4 3>;
|
|
|
|
};
|
|
|
|
|
|
|
|
prog: progck {
|
|
|
|
compatible = "atmel,at91rm9200-clk-programmable";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&pmc>;
|
|
|
|
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
|
|
|
|
|
|
|
|
prog0: prog0 {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <0>;
|
|
|
|
interrupts = <AT91_PMC_PCKRDY(0)>;
|
|
|
|
};
|
|
|
|
|
|
|
|
prog1: prog1 {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <1>;
|
|
|
|
interrupts = <AT91_PMC_PCKRDY(1)>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
systemck {
|
|
|
|
compatible = "atmel,at91rm9200-clk-system";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
pck0: pck0 {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <8>;
|
|
|
|
clocks = <&prog0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pck1: pck1 {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <9>;
|
|
|
|
clocks = <&prog1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
periphck {
|
|
|
|
compatible = "atmel,at91rm9200-clk-peripheral";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
clocks = <&mck>;
|
|
|
|
|
|
|
|
pioA_clk: pioA_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pioB_clk: pioB_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <3>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pioC_clk: pioC_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <4>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pioD_clk: pioD_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <5>;
|
|
|
|
};
|
|
|
|
|
|
|
|
usart0_clk: usart0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <6>;
|
|
|
|
};
|
|
|
|
|
|
|
|
usart1_clk: usart1_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <7>;
|
|
|
|
};
|
|
|
|
|
|
|
|
usart2_clk: usart2_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <8>;
|
|
|
|
};
|
|
|
|
|
|
|
|
usart3_clk: usart3_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <9>;
|
|
|
|
};
|
|
|
|
|
|
|
|
mci0_clk: mci0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
twi0_clk: twi0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <11>;
|
|
|
|
};
|
|
|
|
|
|
|
|
twi1_clk: twi1_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <12>;
|
|
|
|
};
|
|
|
|
|
|
|
|
spi0_clk: spi0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <13>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc0_clk: ssc0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <14>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ssc1_clk: ssc1_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <15>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tc0_clk: tc0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <16>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tc1_clk: tc1_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <17>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tc2_clk: tc2_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <18>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pwm_clk: pwm_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <19>;
|
|
|
|
};
|
|
|
|
|
|
|
|
adc_clk: adc_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <20>;
|
|
|
|
};
|
|
|
|
|
|
|
|
dma0_clk: dma0_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <21>;
|
|
|
|
};
|
|
|
|
|
|
|
|
udphs_clk: udphs_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <22>;
|
|
|
|
};
|
|
|
|
|
|
|
|
lcd_clk: lcd_clk {
|
|
|
|
#clock-cells = <0>;
|
|
|
|
reg = <23>;
|
|
|
|
};
|
|
|
|
};
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
rstc@fffffd00 {
|
|
|
|
compatible = "atmel,at91sam9260-rstc";
|
|
|
|
reg = <0xfffffd00 0x10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
shdwc@fffffd10 {
|
|
|
|
compatible = "atmel,at91sam9260-shdwc";
|
|
|
|
reg = <0xfffffd10 0x10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pit: timer@fffffd30 {
|
|
|
|
compatible = "atmel,at91sam9260-pit";
|
|
|
|
reg = <0xfffffd30 0xf>;
|
|
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
2014-03-12 09:43:43 +00:00
|
|
|
clocks = <&mck>;
|
2014-03-12 09:43:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
watchdog@fffffd40 {
|
|
|
|
compatible = "atmel,at91sam9260-wdt";
|
|
|
|
reg = <0xfffffd40 0x10>;
|
|
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c@0 {
|
|
|
|
compatible = "i2c-gpio";
|
|
|
|
gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
|
|
|
|
<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
|
|
|
|
i2c-gpio,sda-open-drain;
|
|
|
|
i2c-gpio,scl-open-drain;
|
|
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c_gpio0>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c@1 {
|
|
|
|
compatible = "i2c-gpio";
|
|
|
|
gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
|
|
|
|
<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
|
|
|
|
i2c-gpio,sda-open-drain;
|
|
|
|
i2c-gpio,scl-open-drain;
|
|
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c_gpio1>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
};
|