leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
73f12e8d3d
linux/drivers/misc/Makefile

39 lines
1.3 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Makefile for misc devices that really don't fit anywhere else.
#
[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:36 +00:00
obj-$(CONFIG_IBM_ASM) += ibmasm/
ad525x_dpot: new driver for AD525x digital potentiometers This driver supports the non-volatile digital potentiometers via I2C: AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255 It provides a sysfs interface to each device for reading/writing which is documented in Documentation/misc-devices/ad525x_dpot.txt. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:15 +00:00
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
ad525x_dpot: add support for SPI parts Split the bus logic out into separate files so that we can handle I2C and SPI busses independently. The new SPI bus logic brings in support for a lot more parts: AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, AD7376, AD8400, AD8402, AD8403, ADN2850 [randy.dunlap@oracle.com: fix ad525X_dpot build] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 21:33:14 +00:00
obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
Basic PWM driver for AVR32 and AT91 PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:21 +00:00
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
Driver for the Atmel on-chip SSC on AT32AP and AT91 The Synchronous Serial Controller (SSC) on Atmel microprocessors are capable of tranceiving many frame based protocols, like I2S. Tested on the AT32AP7000/ATSTK1000. This driver is used in the ALSA sound driver for the AT73C213 external DAC on the ATSTK1000 development board for AVR32. This sound driver will be submitted soon. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 [akpm@linux-foundation.org: init spinlock at compile time] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:11 +00:00
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
atmel_tc library Create <linux/atmel_tc.h> based on <asm-arm/arch-at91/at91-tc.h> and the at91sam9263 and at32ap7000 datasheets. Most AT91 and AT32 SOCs have one or two of these TC blocks, which include three 16-bit timers that can be interconnected in various ways. These TC blocks can be used for external interfacing (such as PWM and measurement), or used as somewhat quirky sixteen-bit timers. Changes relative to the original version: * Drop unneeded inclusion of <linux/mutex.h> * Support an arbitrary number of TC blocks * Return a struct with information about a TC block from atmel_tc_alloc() instead of using a combination of return values and "out" parameters. * ioremap() the I/O registers on allocation * Look up clocks and irqs for all channels * Add "name" parameter to atmel_tc_alloc() and use this when requesting the iomem resource. * Check if the platform provided the necessary resources at probe() time instead of when the TCB is allocated. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-23 01:23:23 +00:00
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec This driver adds support for the BMP085 digital pressure sensor from Bosch Sensortec. It exposes a sysfs api to userspace where pressure and temperature measurement results can be read from the pressure0_input and temp0_input file. The chip is able to calculate the average of up to eight samples to increase the accuracy. This feature can be controlled by writing to the oversampling file. The BMP085 digital pressure sensor can measure ambient air pressure and temperature. Both values can be obtained from sysfs files. The pressure is measured by reading from pressure0_input. Valid values range from 30000 to 110000 pascal with a resolution of 1 pascal (=0.01 millibar). temp0_input holds the current temperature in degree celsius, multiplied by 10. This results in a resolution of a tenth degree celsius. Values range from -400 to 850. To increase the accuracy, this chip can calculate the average of 1, 2, 4 or 8 samples. This behavior is controlled through the oversampling sysfs file. Two to the power of the value written to that file specifies how many samples will be used. Valid values: 0..3. [akpm@linux-foundation.org: fix typo] [shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Christoph Mair <christoph.mair@gmail.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 00:20:28 +00:00
obj-$(CONFIG_BMP085) += bmp085.o
ics932s401: new clock generator chip driver The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 21:27:04 +00:00
obj-$(CONFIG_ICS932S401) += ics932s401.o
[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:36 +00:00
obj-$(CONFIG_LKDTM) += lkdtm.o
[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 09:15:38 +00:00
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
Misc: add sensable phantom driver Add sensable phantom driver Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:31:45 +00:00
obj-$(CONFIG_PHANTOM) += phantom.o
drivers/misc: ROHM BH1780GLI ambient light sensor driver Add support for ROHM BH1780GLI Ambient light sensor. BH1780 supports I2C interface. Driver supports read/update of power state and read of lux value (through SYSFS). Writing value 3 to power_state enables the sensor and current lux value could be read. Currently this driver follows the same sysfs convention as supported by drivers/misc/isl29003.c. Signed-off-by: Hemanth V <hemanthv@ti.com> Reviewed-by: Daniel Mack <daniel@caiaq.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 00:20:25 +00:00
obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
[PATCH] ioc4: Enable build on non-SN2 The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on Altix XE (x86_64) platforms in the near future. As such it is now a misnomer for the IOC4 base device driver to live under drivers/sn, and would complicate builds for non-SN2. This patch moves the IOC4 base driver code from drivers/sn to drivers/misc, and updates the associated Makefiles and Kconfig files to allow building on non-SN2 configs. Due to the resulting change in link order, it is now necessary to use late_initcall() for IOC4 subdriver initialization. [akpm@osdl.org: __udivdi3 fix] [akpm@osdl.org: fix default in Kconfig] Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 07:09:25 +00:00
obj-$(CONFIG_SGI_IOC4) += ioc4.o
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 21:40:56 +00:00
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
[IA64] move XP and XPC to drivers/misc/sgi-xp Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-22 19:46:56 +00:00
obj-$(CONFIG_SGI_XP) += sgi-xp/
GRU Driver: driver/misc Makefile & Kconfig changes Driver/misc changes for the GRU driver Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 05:34:01 +00:00
obj-$(CONFIG_SGI_GRU) += sgi-gru/
cs5535: add a generic MFGPT driver This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's not x86 specific, it's modular, and it makes use of a PCI BAR rather than a random MSR. Currently module unloading is not supported; it's uncertain whether or not it can be made work with the hardware. [akpm@linux-foundation.org: add X86 dependency] Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:37 +00:00
obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o
HP iLO driver A driver for the HP iLO/iLO2 management processor, which allows userspace programs to query the management processor. Programs can open a channel to the device (/dev/hpilo/dXccbN), and use this to send/receive queries. The O_EXCL open flag is used to indicate that a particular channel cannot be shared between processes. This driver will replace various packages HP has shipped, including hprsm and hp-ilo. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-02 15:38:53 +00:00
obj-$(CONFIG_HP_ILO) += hpilo.o
drivers/misc/isl29003.c: driver for the ISL29003 ambient light sensor Add a driver for Intersil's ISL29003 ambient light sensor device plus some documentation. Inspired by tsl2550.c, a driver for a similar device. It is put in drivers/misc for now until the industrial I/O framework gets merged. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31 22:23:53 +00:00
obj-$(CONFIG_ISL29003) += isl29003.o
tsl2550: Move from i2c/chips to misc Move the last remaining driver from i2c/chips to misc. Good ridance! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2010-03-13 19:56:54 +00:00
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-29 21:41:06 +00:00
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
i2c/chips: Move ds1682 to drivers/misc As i2c/chips is deprecated, move ds1682 to a more apropriate location. Build tested. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-06 16:06:16 +00:00
obj-$(CONFIG_DS1682) += ds1682.o
drivers/misc: add driver for Texas Instruments DAC7512 Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:17 +00:00
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
Add c2 port support C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 21:27:12 +00:00
obj-$(CONFIG_C2PORT) += c2port/
iwmc3200top: Add Intel Wireless MultiCom 3200 top driver. This patch adds Intel Wireless MultiCom 3200 top driver. IWMC3200 is 4Wireless Com CHIP (GPS/BT/WiFi/WiMAX). Top driver is responsible for device initialization and firmware download. Firmware handled by top is responsible for top itself and as well as bluetooth and GPS coms. (Wifi and WiMax provide their own firmware) In addition top driver is used to retrieve firmware logs and supports other debugging features Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17 09:09:34 +00:00
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
hmc6352: add driver for the HMC6352 compass This driver will report the heading values in degrees to the sysfs interface. The values returned are headings . e.g. 245.6 Alan: Cleanups requested now all folded in and a sysfs description to keep Andrew happy. The sysfs description now resembles hwmon. Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 00:21:05 +00:00
obj-$(CONFIG_HMC6352) += hmc6352.o
i2c: Move at24 to drivers/misc/eeprom As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26 20:19:53 +00:00
obj-y += eeprom/
mmc: Driver for CB710/720 memory card reader (MMC part) The code is divided in two parts. There is a virtual 'bus' driver that handles PCI device and registers three new devices one per card reader type. The other driver handles SD/MMC part of the reader. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-22 18:33:59 +00:00
obj-y += cb710/
VMware Balloon driver This is a standalone version of VMware Balloon driver. Ballooning is a technique that allows hypervisor dynamically limit the amount of memory available to the guest (with guest cooperation). In the overcommit scenario, when hypervisor set detects that it needs to shuffle some memory, it instructs the driver to allocate certain number of pages, and the underlying memory gets returned to the hypervisor. Later hypervisor may return memory to the guest by reattaching memory to the pageframes and instructing the driver to "deflate" balloon. We are submitting a standalone driver because KVM maintainer (Avi Kivity) expressed opinion (rightly) that our transport does not fit well into virtqueue paradigm and thus it does not make much sense to integrate with virtio. There were also some concerns whether current ballooning technique is the right thing. If there appears a better framework to achieve this we are prepared to evaluate and switch to using it, but in the meantime we'd like to get this driver upstream. We want to get the driver accepted in distributions so that users do not have to deal with an out-of-tree module and many distributions have "upstream first" requirement. The driver has been shipping for a number of years and users running on VMware platform will have it installed as part of VMware Tools even if it will not come from a distribution, thus there should not be additional risk in pulling the driver into mainline. The driver will only activate if host is VMware so everyone else should not be affected at all. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Cc: Avi Kivity <avi@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-23 17:18:08 +00:00
obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
ARM: 6214/2: driver for the character LCD found in ARM refdesigns This adds a driver for the character LCD found on the ARM Versatile and RealView Platform Baseboards. It doesn't do very much more than display the text "ARM Linux" on the first line and the linux banner on the second line, but that's still useful. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-17 11:33:48 +00:00
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
misc: ti-st: Kconfig & Makefile for TI_ST Add the Kconfig and the Makefile for the TI_ST driver. TI_ST driver is the line discipline driver for the Texas Instrument's WiLink chipsets. Also add the ti-st folder to list of drivers under drivers/misc. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 16:18:15 +00:00
obj-y += ti-st/
Reference in New Issue Copy Permalink