leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
71e3039dd7
linux/arch/arm/configs/multi_v7_defconfig

1031 lines
24 KiB
Plaintext
Raw Normal View History

ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_SYSVIPC=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: multi_v7_defconfig: Enable cgroups This allows booting the kernel with systemd-based root file systems. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-17 19:55:07 +00:00
CONFIG_CGROUPS=y
arm: multi_v7_defconfig: Enable initrd/initramfs support Add CONFIG_BLK_DEV_INITRD to the defconfig to support initramfs and initrd. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-19 17:53:04 +00:00
CONFIG_BLK_DEV_INITRD=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_EMBEDDED=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_PERF_EVENTS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
ARM: multi_v7_defconfig: add driver support for hix5hd2 Tested on hix5hd2 platform with mmc, usb, network, reboot etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-25 07:37:26 +00:00
CONFIG_CMDLINE_PARTITION=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_ARCH_VIRT=y
ARM: multi_v7_defconfig: enable alpine platform The generic PCI driver is required for SATA device probe on Alpine platform, so it cannot be modular. Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-26 18:34:33 +00:00
CONFIG_ARCH_ALPINE=y
ARM: multi_v7_defconfig: add MACH_ARTPEC6 Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-11 16:06:20 +00:00
CONFIG_ARCH_ARTPEC=y
CONFIG_MACH_ARTPEC6=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_ARCH_AT91=y
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC Add Atmel SAMA5D2 SoC family to multi_v7 image. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 13:04:49 +00:00
CONFIG_SOC_SAMA5D2=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_BCM=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_ARCH_BCM_CYGNUS=y
ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2 Turn on Broadcom Hurrican 2 SoC support by default to get access to its drivers. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 23:15:02 +00:00
CONFIG_ARCH_BCM_HR2=y
ARM: multi_v7_defconfig: Add NSP to defconfig Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig Signed-off-by: Jon Mason <jonmason@broadcom.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-08-26 22:35:29 +00:00
CONFIG_ARCH_BCM_NSP=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_ARCH_BCM_5301X=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_21664=y
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_ARCH_BCM2835=y
ARM: multi_v7_defconfig: Enable BCM63xx Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as the serial console driver for this platform. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:26 +00:00
CONFIG_ARCH_BCM_63XX=y
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes. This patch adds machine support for the ARM-based Broadcom SoCs. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-01-16 23:00:42 +00:00
CONFIG_ARCH_BRCMSTB=y
ARM: add Marvell Berlin SoCs to multi_v7_defconfig This adds the Marvell Berlin SoC family, Marvell Armada 1500 (BG2), and Marvell Armada 1500-mini (BG2CD) to the multi_v7_defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-09-09 12:09:29 +00:00
CONFIG_ARCH_BERLIN=y
CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
ARM: multi_v7_defconfig: Select CONFIG_MACH_BERLIN_BG2Q Now that we support Berlin BG2Q, select CONFIG_MACH_BERLIN_BG2Q so that we can boot BG2Q based boards like the BG2Q DMP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-21 19:39:17 +00:00
CONFIG_MACH_BERLIN_BG2Q=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 10:59:44 +00:00
CONFIG_ARCH_DIGICOLOR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_ARCH_HIGHBANK=y
ARM: config: enable ARCH_HIX5HD2 Since both ARCH_HI3xxx and ARCH_HIX5HD2 are based on Cortex A9 & they're using similiar kernel features, make them share the hi3xxx_config. And add it into multi_v7_defconfig too. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: also turn on ARCH_HISI in multi_v7] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-12 01:25:21 +00:00
CONFIG_ARCH_HISI=y
ARM: config: enable hi3xxx in multi_v7_defconfig Enable ARCH_HI3xxx in multi_v7_defconfig. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-11 07:54:52 +00:00
CONFIG_ARCH_HI3xxx=y
ARM: multi_v7_defconfig: Enable Hip01 platform Enable Hip01 platform support for multi_v7_defconfig. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-14 07:02:04 +00:00
CONFIG_ARCH_HIP01=y
ARM: config: enable hisilicon hip04 Enable CONFIG_ARCH_HIP04 in both hi3xxx_defconfig & multi_v7_defconfig. Since CONFIG_ARM_LPAE is disabled by default, only 3GB memory could be support by this defconfig. User should enable CONFIG_ARM_LPAE locally to support 16GB memory on hip04 platform. Since hip04 doesn't belong to hi3xxx series, rename hi3xxx_defconfig to hisi_defconfig. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-08-01 12:30:12 +00:00
CONFIG_ARCH_HIP04=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ARCH_HIX5HD2=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_MXC=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 17:35:49 +00:00
CONFIG_SOC_IMX50=y
ARM: imx5: drop option MACH_IMX51_DT Since i.MX51 becomes DT only now, we can drop option MACH_IMX51_DT and just use SOC_IMX51 instead. While at it, rename imx51-dt.c to mach-imx51.c to align with the name schema of other IMX DT only platforms. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-19 05:47:43 +00:00
CONFIG_SOC_IMX51=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 17:35:49 +00:00
CONFIG_SOC_IMX6SX=y
ARM: multi_v7_defconfig: Select MX6UL and MX7D Let MX6UL and MX7D SoCs be selected by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 14:10:44 +00:00
CONFIG_SOC_IMX6UL=y
CONFIG_SOC_IMX7D=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 17:35:49 +00:00
CONFIG_SOC_LS1021A=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SOC_VF610=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_39X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-13 03:00:20 +00:00
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SOC_OMAP5=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-13 03:00:20 +00:00
CONFIG_SOC_AM33XX=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SOC_AM43XX=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_SOC_DRA7XX=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ARCH_SIRF=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 20:34:05 +00:00
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_ROCKCHIP=y
ARM: shmobile: Introduce ARCH_RENESAS The purpose of this patch is to start the process of replacing both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS. RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer) ARM64 based SoCs. This patches only addresses 32-bit ARM based SoCs. Proposed support for the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects ARCH_SHMOBILE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-10 00:06:41 +00:00
CONFIG_ARCH_RENESAS=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
CONFIG_ARCH_R8A73A4=y
CONFIG_ARCH_R8A7740=y
ARM: multi_v7_defconfig: Enable r8a774[35] SoCs Enable recently added r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-06 13:32:53 +00:00
CONFIG_ARCH_R8A7743=y
ARM: multi_v7_defconfig: Enable r8a7744 SoC Enable recently added r8a7744 (RZ/G1N) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-17 15:06:29 +00:00
CONFIG_ARCH_R8A7744=y
ARM: multi_v7_defconfig: Enable r8a774[35] SoCs Enable recently added r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-06 13:32:53 +00:00
CONFIG_ARCH_R8A7745=y
ARM: multi_v7_defconfig: Enable r8a77470 SoC Enable recently added r8a77470 (RZ/G1C) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-28 19:26:16 +00:00
CONFIG_ARCH_R8A77470=y
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 12:14:21 +00:00
CONFIG_ARCH_R8A7778=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC Enable support for r8a7792 SoC in multi_v7_defconfig. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 05:23:58 +00:00
CONFIG_ARCH_R8A7792=y
ARM: multi_v7_defconfig: Enable shmobile r8a7793/gose platform Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-02 01:34:37 +00:00
CONFIG_ARCH_R8A7793=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_ARCH_R8A7794=y
ARM: multi_v7_defconfig: Enable support for RZN1D-DB Enable support for the Renesas RZN1D-DB Board: - RZ/N1D (R9A06G032) base SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-11 14:31:23 +00:00
CONFIG_ARCH_R9A06G032=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_ARCH_SH73A0=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ARCH_SOCFPGA=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_STM32=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
ARM: multi_v7_defconfig: enable UniPhier SoC family Add UniPhier, a new citizen in the ARM multi platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-08 04:07:12 +00:00
CONFIG_ARCH_UNIPHIER=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_U8500=y
CONFIG_ARCH_VEXPRESS=y
ARM: add TC2 PM support to multi_v7_defconfig Without this, the multi_v7_defconfig kernel cannot boot all CPUs nor do deep cpuidle power saving on a TC2 board. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-15 02:46:25 +00:00
CONFIG_ARCH_VEXPRESS_TC2_PM=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PCIEPORTBUS=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_PCI_MVEBU=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_PCI_TEGRA=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_PCI_RCAR_GEN2=y
PCI: rcar-pcie: Remove Gen2 designation from Kconfig It appears that Gen2 is a misnomer for the R-Car PCIE driver which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2 from the help text and Kconfig symbol. Also, re-arange the Kconfig symbol name to use PCIE as the prefix. This appears to be in keeping with other PCIE Kconfig symbols. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-21 03:51:55 +00:00
CONFIG_PCIE_RCAR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_KEYSTONE=y
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 09:31:33 +00:00
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SMP=y
ARM: multi_v7_defconfig: increase the number of maximum number of CPUs to 16 The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8() DT /cpu 9 nodes greater than max cores 8, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Hisilicon HiP04 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0) [] (setup_arch) from [] (start_kernel+0x8c/0x3b4) [] (start_kernel) from [<10208074>] (0x10208074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-11 03:52:27 +00:00
CONFIG_NR_CPUS=16
ARM: multi_v7_defconfig: Enable SECCOMP Systemd already supports seccomp. It seems some distros are building systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors: systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-08-12 12:34:03 +00:00
CONFIG_SECCOMP=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_ARM_APPENDED_DTB=y
ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT Without this, legacy platforms that can boot with a multiplatform kernel but that need the DTB to be appended, won't have a way to pass firmware-set bootargs to the kernel. This is needed to boot multi_v7_defconfig on snowball, for instance. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-16 16:01:24 +00:00
CONFIG_ARM_ATAG_DTB_COMPAT=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_KEXEC=y
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 14:28:20 +00:00
CONFIG_EFI=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_CPU_FREQ=y
cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05 08:27:41 +00:00
CONFIG_CPU_FREQ_STAT=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: multi_v7_defconfig: Enable CPUFreq governors as modules Currently only the ondemand and performance CPUFreq policy governors are enabled in multi_v7 defconfig. But the other governors are also useful for some cases, enable them to allow users change the default if needed. The options are enabled as module to keep the kernel image size minimal. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-08 19:02:10 +00:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module The schedutil CPUFreq governor could be built as a module but the change "cpufreq / sched: Pass flags to cpufreq_update_util()" made it non-modular so attempting to enable as module leads to a warning: warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-08-19 15:43:13 +00:00
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_CPUFREQ_DT=y
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ The Wandboard Quad can make use of the cpufreq support provided by the driver. Enable it and its dependency, REGULATOR_ANATOP, by default. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 18:08:12 +00:00
CONFIG_ARM_IMX6Q_CPUFREQ=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_QORIQ_CPUFREQ=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_CPU_IDLE=y
ARM: config: multi_v7: Update to enable cpuidle for QCOM SoCs Update defconfig to allow cpuidle for QCOM cpus. * Enable QCOM_PM * Enable ARM_CPUIDLE Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-04-09 19:20:43 +00:00
CONFIG_ARM_CPUIDLE=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_ARM_ZYNQ_CPUIDLE=y
ARM: multi_v7_defconfig: Enable CPU idle for exynos SoCs Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and Exynos5250. Enable it in default configuration to reduce energy consumption. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:00:07 +00:00
CONFIG_ARM_EXYNOS_CPUIDLE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_KERNEL_MODE_NEON=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_NET=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_PACKET=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_UNIX=y
CONFIG_INET=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 08:12:58 +00:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:27 +00:00
CONFIG_NET_DSA=m
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 21:31:50 +00:00
CONFIG_CAN=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_CAN_AT91=m
ARM: multi_v7_defconfig: add NXP FlexCAN IP support Enable FlexCAN support as module by default. FlexCAN can be found on various NXP designs such as the i.MX and Vybrid SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:41 +00:00
CONFIG_CAN_FLEXCAN=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_CAN_SUN4I=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_CAN_XILINXCAN=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_CAN_RCAR=m
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 21:31:50 +00:00
CONFIG_CAN_MCP251X=y
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 14:40:15 +00:00
CONFIG_BT=m
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 11:28:40 +00:00
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCM=y
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 14:40:15 +00:00
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: update multi_v7_defconfig for Tegra This patch adds the same options to multi_v7_defconfig as were added to tegra_defconfig in commit d1c912c1001f "ARM: tegra: defconfig updates". (CONFIG_POWER_RESET_AS3722 is already enabled here.) Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21 20:56:58 +00:00
CONFIG_CMA_SIZE_MBYTES=64
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 07:39:41 +00:00
CONFIG_OMAP_OCP2SCP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SIMPLE_PM_BUS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MTD=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MTD_M25P80=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_MTD_NAND=y
ARM: multi_v7_defconfig: enable Denali NAND controller This NAND controller device is used on UniPhier SoCs (and I know it is also used on SoC FPGA). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-14 07:54:24 +00:00
CONFIG_MTD_NAND_DENALI_DT=y
multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI A wide variety of TI platforms support NAND via the CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this. In addition, multi_v7_defconfig supports the dm8168-evm and that supports root being on a SATA drive, so build the DM816 AHCI driver into the resulting kernel as well. Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-21 11:42:39 +00:00
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_MTD_NAND_ATMEL=y
ARM: multi_v7_defconfig: Add Marvell NAND controller support Add Marvell NAND controller support used by some Marvell Armada based boards. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-28 15:13:57 +00:00
CONFIG_MTD_NAND_MARVELL=y
ARM: multi_v7_defconfig: add GPMI NAND controller support Add GPMI NAND controller support as required by some NXP i.MX6/7 based boards. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:40 +00:00
CONFIG_MTD_NAND_GPMI_NAND=y
ARM: multi_v7_defconfig: Enable BRCMNAND driver The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and Cygnus/iProc under mach-bcm, this is enough critical mass to enable it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-27 16:25:44 +00:00
CONFIG_MTD_NAND_BRCMNAND=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_MTD_NAND_VF610_NFC=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 18:51:29 +00:00
CONFIG_MTD_NAND_DAVINCI=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_MTD_SPI_NOR=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_SPI_FSL_QUADSPI=m
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_MTD_UBI=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_BLK_DEV_LOOP=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_BLK=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_ATMEL_TCLIB=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_ICS932S401=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_ATMEL_SSC=m
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 22:47:50 +00:00
CONFIG_QCOM_COINCELL=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 09:31:33 +00:00
CONFIG_PCI_ENDPOINT_TEST=m
ARM: multi_v7: enable AT24C EEPROM driver This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-15 21:10:27 +00:00
CONFIG_EEPROM_AT24=y
arm: mvebu: SATA support: mvebu_defconfig update Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-10-26 12:30:48 +00:00
CONFIG_BLK_DEV_SD=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_BLK_DEV_SR=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_ATA=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_SATA_AHCI=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SATA_AHCI_PLATFORM=y
ARM: multi_v7_defconfig: Enable Broadcom AHCI Enable the Broadcom AHCI driver and its companion PHY driver to get functional SATA3 support. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:28 +00:00
CONFIG_AHCI_BRCM=y
multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI A wide variety of TI platforms support NAND via the CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this. In addition, multi_v7_defconfig supports the dm8168-evm and that supports root being on a SATA drive, so build the DM816 AHCI driver into the resulting kernel as well. Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-21 11:42:39 +00:00
CONFIG_AHCI_DM816=y
ARM: multi_v7_defconfig: Enable ST's (S)ATA driver Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-07-22 09:39:00 +00:00
CONFIG_AHCI_ST=y
ARM: multi_v7_defconfig: Enable AHCI_IMX The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by default to make it easy to have the root filesystem on it. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 18:08:11 +00:00
CONFIG_AHCI_IMX=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_AHCI_SUNXI=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_AHCI_TEGRA=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SATA_HIGHBANK=y
arm: mvebu: SATA support: mvebu_defconfig update Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-10-26 12:30:48 +00:00
CONFIG_SATA_MV=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SATA_RCAR=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_NETDEVICES=y
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_NET=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_NET_DSA_BCM_SF2=m
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-13 03:00:20 +00:00
CONFIG_SUN4I_EMAC=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:27 +00:00
CONFIG_BCMGENET=m
ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers Add a bunch of required drivers and subsystems: - BCMA is the on-chip discoverable bus which registers a bunch of peripherals - Enable the BCM47xx watchdog driver to get working system reboot - Enable the BCM47xx NVRAM/SPROM drivers to be able to fetch MAC addresses and other variables needed for system operation - Make BGMAC (built-in Ethernet adapter) a module Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-27 23:12:32 +00:00
CONFIG_BGMAC_BCMA=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:27 +00:00
CONFIG_SYSTEMPORT=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MACB=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_NET_CALXEDA_XGMAC=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_GIANFAR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_HIX5HD2_GMAC=y
CONFIG_E1000E=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_IGB=y
ARM: add Marvell Dove and some drivers to multi_v7 defconfig With Marvell Dove now being part of the multi_v7 family, add some Dove specific drivers to multi_v7 defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-27 21:28:05 +00:00
CONFIG_MV643XX_ETH=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_MVNETA=y
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 14:02:50 +00:00
CONFIG_PXA168_ETH=m
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 07:39:41 +00:00
CONFIG_KS8851=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_R8169=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SH_ETH=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SMSC911X=y
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-03-27 12:21:09 +00:00
CONFIG_SNI_AVE=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_STMMAC_ETH=y
synopsys: remove dwc_eth_qos driver This driver is no longer necessary since it was merged into stmmac. Acked-by: Lars Persson <larper@axis.com> Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12 09:56:18 +00:00
CONFIG_DWMAC_DWC_QOS_ETH=y
ARM: multi_v7_defconfig: enable network for BeagleBone Black BeagleBone Black uses the TI CPSW ethernet controller, enable it in the multi_v7_defconfig for testing coverage purposes. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.12
2013-12-02 08:15:29 +00:00
CONFIG_TI_CPSW=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_XILINX_EMACLITE=y
ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-11 16:16:16 +00:00
CONFIG_AT803X_PHY=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_BROADCOM_PHY=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_ICPLUS_PHY=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MARVELL_PHY=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_MICREL_PHY=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_REALTEK_PHY=y
multi_v7_defconfig: Make rockchip PHY built-in Enable the rockchip PHY driver for multi_v7_defconfig builds. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 13:56:41 +00:00
CONFIG_ROCKCHIP_PHY=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SMSC_PHY=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_USB_PEGASUS=y
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over USB 3.0. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-11 17:36:00 +00:00
CONFIG_USB_RTL8152=m
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 11:28:40 +00:00
CONFIG_USB_LAN78XX=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_BRCMFMAC=m
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 14:40:15 +00:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_RT2X00=m
CONFIG_RT2800USB=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_INPUT_JOYDEV=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_INPUT_EVDEV=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_KEYBOARD_QT1070=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_KEYBOARD_SAMSUNG=m
ARM: multi_v7_defconfig: add ST Keyscan driver This patch adds KEYBOARD_ST_KEYSCAN config Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-06-27 13:34:00 +00:00
CONFIG_KEYBOARD_ST_KEYSCAN=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_KEYBOARD_SPEAR=y
ARM: multi_v7_defconfig: Build ChromeOS EC drivers as modules Since the multi_v7_defconfig is used to build an image for different platforms, the options should be enabled as module whenever possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-17 15:58:44 +00:00
CONFIG_KEYBOARD_CROS_EC=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MOUSE_PS2_ELANTECH=y
ARM: multi_v7_defconfig: Enable Cypress APA I2C Trackpad support The Cypress All Points Addressable (APA) I2C Trackpad is used in the Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so the device is supported. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:12:33 +00:00
CONFIG_MOUSE_CYAPA=m
ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 14:40:14 +00:00
CONFIG_MOUSE_ELAN_I2C=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: multi_v7_defconfig: add generic resistive touchscreen Add generic resistive touchscreen CONFIG_TOUCHSCREEN_ADC Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 14:17:44 +00:00
CONFIG_TOUCHSCREEN_ADC=m
ARM: multi_v7_defconfig: Build Atmel maXTouch driver as a module The driver is for a trackpad device so is not needed for booting and makes more sense to have it as module to reduce the kernel image size. It was probably enabled as built-in because module autoload was not working when the I2C device was registered by OF but this got fixed in commit b7d21058b40b ("Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload") so it's safe to enable as a module now. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-16 15:08:14 +00:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:13 +00:00
CONFIG_TOUCHSCREEN_MMS114=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_TOUCHSCREEN_WM97XX=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_TOUCHSCREEN_ST1232=m
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_TOUCHSCREEN_STMPE=y
ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) on sunxi by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 02:35:27 +00:00
CONFIG_TOUCHSCREEN_SUN4I=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_INPUT_MISC=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:08 +00:00
CONFIG_INPUT_MAX77693_HAPTIC=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_INPUT_MAX8997_HAPTIC=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_INPUT_CPCAP_PWRBUTTON=m
ARM: multi_v7_defconfig: Enable RSB and AXP20X related drivers as modules axp20x support has been split into 2 parts, I2C and RSB interface variants. Update the MFD_AXP20X symbol for I2C support. Also enable SUNXI_RSB MFD_AXP20X_RSB to support RSB variants. Build these drivers as modules. Keep MFD_AXP20X enabled for now, to ease migration for automated boot farms while the patches are being merged. This should be removed in the next release. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-16 16:38:28 +00:00
CONFIG_INPUT_AXP20X_PEK=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_INPUT_ADXL34X=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
ARM: multi_v7_defconfig: Enable serial console on RPi 3 The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC as the primary serial console of the board, so enable it in the multiplatform defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-07 00:53:09 +00:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SERIAL_8250_DW=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SERIAL_8250_EM=y
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default We've already moved omap2plus_defconfig over to use 8250-omap instead of omap-serial driver. Let's update multi_v7_defconfig too. By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the kernel serial console to point to 8250 driver and warns about it during the boot. Users with ttyO[0123] in their /etc/inittab should update inittab to to use ttyS[0123] instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 16:46:40 +00:00
CONFIG_SERIAL_8250_OMAP=y
ARM: Add mediatek SoC UART support in defconfig Add mediatek SoC UART support in multi_v7_defconfig Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-12-26 09:55:00 +00:00
CONFIG_SERIAL_8250_MT6577=y
ARM: multi_v7_defconfig: enable UniPhier UART driver The UniPhier on-chip UART driver was merged into the mainline by commit 1a8d2903cb6a ("serial: 8250_uniphier: add UniPhier serial driver"). Enable it from multi_v7_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-10 04:53:58 +00:00
CONFIG_SERIAL_8250_UNIPHIER=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_TTYAT=y
ARM: meson: update multi_v7_defconfig This patch updates the multi_v7_defconfig with the CONFIG_* needed by the just added Meson anch. It also adds a new defconfig specifically for the Meson SoCs. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 20:29:15 +00:00
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 15:14:10 +00:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
ARM: sirf: enable support in multi_v7_defconfig This enables all sirf specific drivers in the defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Barry Song <Baohua.Song@csr.com>
2013-03-19 22:08:43 +00:00
CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SERIAL_TEGRA=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-13 03:00:20 +00:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 20:34:05 +00:00
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 08:11:40 +00:00
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
arm: multi_v7_defconfig: Enable Zynq UART driver Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-19 17:53:03 +00:00
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 08:12:58 +00:00
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 10:59:44 +00:00
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
ARM: multi_v7_defconfig: Fix STi support This patch adds ST serial driver (st-asc) and ICPLUS ethernet PHY to multi_v7_defconfig. All STi based SOCs use ST-ASC as default serial console, and most of the STi SOC based boards have ICPLUS external ethernet PHY. These two options makes the system boot nfs root with console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04 13:10:13 +00:00
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
ARM: configs: multi_v7: add stm32 support This patch adds stm32 support to multi_v7_defconfig Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-26 16:45:12 +00:00
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 11:28:40 +00:00
CONFIG_SERIAL_DEV_BUS=y
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_CONSOLE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ST=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_I2C_CHARDEV=y
ARM: multi_v7_defconfig: Enable GPIO-based I2C arbitration support The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook to arbitrate the access to a I2C bus by the Application Processor or a EC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:11:49 +00:00
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
ARM: update multi_v7_defconfig for Tegra This patch adds the same options to multi_v7_defconfig as were added to tegra_defconfig in commit d1c912c1001f "ARM: tegra: defconfig updates". (CONFIG_POWER_RESET_AS3722 is already enabled here.) Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21 20:56:58 +00:00
CONFIG_I2C_MUX_PCA954x=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_I2C_MUX_PINCTRL=y
ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom The Renesas Lager board shall be a reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-24 10:01:31 +00:00
CONFIG_I2C_DEMUX_PINCTRL=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_I2C_AT91=m
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_I2C_BCM2835=y
ARM: multi_v7_defconfig: Enable Zynq peripheral drivers A few drivers for Zynq peripherals made it into mainline recently. Enable them in the defconfig. The following devices are enabled: - Cadence Macb Ethernet controller - Cadence I2C controller - Arasan SDHCI Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 17:04:28 +00:00
CONFIG_I2C_CADENCE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_I2C_DAVINCI=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 10:59:44 +00:00
CONFIG_I2C_DIGICOLOR=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_I2C_EMEV2=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_I2C_GPIO=m
ARM: multi_v7_defconfig: configure I2C driver built-in PMIC often require the I2C bus, and the PMIC regulators might be necessary to power on eMMC/SD-card or other supplies required for successful boot. Make sure I2C driver for i.MX devices is built-in. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:38 +00:00
CONFIG_I2C_IMX=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_I2C_MESON=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_I2C_MV64XXX=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_I2C_RIIC=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:15 +00:00
CONFIG_I2C_RK3X=y
ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-11-18 19:10:53 +00:00
CONFIG_I2C_S3C2410=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_I2C_SH_MOBILE=y
ARM: sirf: enable support in multi_v7_defconfig This enables all sirf specific drivers in the defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Barry Song <Baohua.Song@csr.com>
2013-03-19 22:08:43 +00:00
CONFIG_I2C_SIRF=y
ARM: multi_v7_defconfig: Enable ST's I2C driver Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-02 13:23:42 +00:00
CONFIG_I2C_ST=y
ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support This patch adds STM32F7 I2C support to multi_v7_defconfig and enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on STM32MP1 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-04 12:46:55 +00:00
CONFIG_I2C_STM32F7=y
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 14:56:42 +00:00
CONFIG_I2C_SUN6I_P2WI=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_I2C_TEGRA=y
ARM: multi_v7_defconfig: enable UniPhier I2C drivers These two drivers were merged into the I2C sub-system by commit dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") and commit 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver"). Enable them from arch/arm/configs/multi_v7_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-27 02:47:13 +00:00
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_I2C_XILINX=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_I2C_RCAR=y
ARM: multi_v7_defconfig: Enable support for missing ChromeOS EC drivers Enable the needed Kconfig options to have support for the ChromeOS EC I2C transport, I2C tunnel and chardev user-space interface. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:03:05 +00:00
CONFIG_I2C_CROS_EC_TUNNEL=m
ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom The Renesas Lager board shall be a reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-24 10:01:31 +00:00
CONFIG_I2C_SLAVE_EEPROM=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SPI=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_SPI_ATMEL=m
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_SPI_CADENCE=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SPI_DAVINCI=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_SPI_GPIO=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_SPI_FSL_DSPI=m
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 07:39:41 +00:00
CONFIG_SPI_OMAP24XX=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_SPI_ORION=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_SPI_PL022=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:15 +00:00
CONFIG_SPI_ROCKCHIP=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SPI_RSPI=y
ARM: multi_v7_defconfig: Enable support for Samsung S3C64XX SPI Build the spi-s3c64xx driver as a module to have support for the SPI controller in several Samsung SoCs. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-18 06:30:16 +00:00
CONFIG_SPI_S3C64XX=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
ARM: sirf: enable support in multi_v7_defconfig This enables all sirf specific drivers in the defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Barry Song <Baohua.Song@csr.com>
2013-03-19 22:08:43 +00:00
CONFIG_SPI_SIRF=y
ARM: multi_v7_defconfig: enable STM32 SPI Enable the STM32 SPI driver, implemented on STM32MP1 SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-08-22 10:49:00 +00:00
CONFIG_SPI_STM32=m
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SPI_TEGRA114=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_SPI_TEGRA20_SFLASH=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_SPI_TEGRA20_SLINK=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_SPI_XILINX=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_SPI_SPIDEV=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 06:15:57 +00:00
CONFIG_SPMI=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 09:12:22 +00:00
CONFIG_PINCTRL_APQ8064=y
ARM: multi_v7_defconfig: fix support for APQ8084 This patch enables configs required to boot IFC6540 board with atleast a serial console. Without this patch there is no serial console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-21 18:55:20 +00:00
CONFIG_PINCTRL_APQ8084=y
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 22:47:50 +00:00
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8916=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 06:15:57 +00:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 18:51:29 +00:00
CONFIG_GPIO_DAVINCI=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_GPIO_SYSCON=y
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30 10:00:37 +00:00
CONFIG_GPIO_UNIPHIER=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_GPIO_PCA953X=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_GPIO_PCA953X_IRQ=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_GPIO_PCF857X=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_GPIO_TWL4030=y
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_ST=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_RMOBILE=y
ARM: multi_v7_defconfig: add ACT8945A ACT8945A is the PMIC present on the sama5d2 Xplained. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01 20:24:55 +00:00
CONFIG_BATTERY_ACT8945A=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_BATTERY_CPCAP=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_BATTERY_SBS=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_AXP20X_POWER=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_CHARGER_CPCAP=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_CHARGER_MAX8997=m
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_CHARGER_MAX8998=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_CHARGER_TPS65090=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_SENSORS_IIO_HWMON=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_SENSORS_LM90=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_SENSORS_LM95245=y
ARM: multi_v7_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable module support for its driver and also for the needed Exynos ADC driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-15 16:32:44 +00:00
CONFIG_SENSORS_NTC_THERMISTOR=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 10:37:17 +00:00
CONFIG_SENSORS_PWM_FAN=m
ARM: multi_v7_defconfig: Enable RPi voltage sensor The patch enables the hwmon driver for the Raspberry Pi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-05-25 19:24:38 +00:00
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 10:37:17 +00:00
CONFIG_SENSORS_INA2XX=m
ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) on sunxi by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 02:35:27 +00:00
CONFIG_CPU_THERMAL=y
ARM: multi_v7_defconfig: enable thermal driver for i.MX devices Enable the i.MX thermal driver required for i.MX SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:37 +00:00
CONFIG_IMX_THERMAL=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:15 +00:00
CONFIG_ROCKCHIP_THERMAL=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_RCAR_THERMAL=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_ARMADA_THERMAL=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_BCM2835_THERMAL=m
CONFIG_BRCMSTB_THERMAL=m
ARM: multi_v7_defconfig: Configure in ST's Thermal Controller Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-06-05 15:06:00 +00:00
CONFIG_ST_THERMAL_MEMMAP=y
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-03-27 12:21:09 +00:00
CONFIG_UNIPHIER_THERMAL=y
ARM: mvebu: Enable watchdog support in defconfig Now that we have proper support for Armada 370/XP watchdog let's enable it in mvebu_defconfig and multi_v7_defconfig. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-10 23:00:36 +00:00
CONFIG_WATCHDOG=y
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_DA9063_WATCHDOG=m
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_XILINX_WATCHDOG=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_ARM_SP805_WATCHDOG=y
ARM: multi_v7_defconfig: add Atmel watchdog timers Add both Atmel watchdog timers to the multi_v7_defconfig. They are added as part of the kernel because it's a core piece of the system. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 15:59:18 +00:00
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DW_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=m
ARM: mvebu: Enable watchdog support in defconfig Now that we have proper support for Armada 370/XP watchdog let's enable it in mvebu_defconfig and multi_v7_defconfig. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-10 23:00:36 +00:00
CONFIG_ORION_WATCHDOG=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:39 +00:00
CONFIG_RN5T618_WATCHDOG=y
ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig Now that the reset code are part of drivers of their own, we need those in the defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-07 02:44:24 +00:00
CONFIG_SUNXI_WATCHDOG=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_IMX2_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_ST_LPC_WATCHDOG=y
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 14:17:52 +00:00
CONFIG_TEGRA_WATCHDOG=m
ARM: defconfig: update multi_v7_defconfig Update the multi_v7_defconfig enabling the watchdog driver for Meson SoCs. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-09-20 17:06:52 +00:00
CONFIG_MESON_WATCHDOG=y
ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-06 11:41:44 +00:00
CONFIG_DIGICOLOR_WATCHDOG=y
ARM: multi_v7_defconfig: Enable RENESAS_WDT R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable its driver by default. It is enabled as a module to avoid increasing the kernel image size. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-02 09:43:53 +00:00
CONFIG_RENESAS_WDT=m
ARM: multi_v7_defconfig: set bcm47xx watchdog Correct the bcm47xx watchdog option. The convention of bcm watchdogs is the _WDT suffix. Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-02 09:42:49 +00:00
CONFIG_BCM47XX_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_BCM2835_WDT=y
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog In order to get rid of bcm_defconfig, enable this driver which is needed by some Broadcom SoCs based on the Kona architecture to reboot. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 19:07:31 +00:00
CONFIG_BCM_KONA_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_BCM7038_WDT=m
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
ARM: multi_v7_defconfig: add ACT8945A ACT8945A is the PMIC present on the sama5d2 Xplained. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01 20:24:55 +00:00
CONFIG_MFD_ACT8945A=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_MFD_AS3711=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MFD_AS3722=y
ARM: multi_v7_defconfig: Add Atmel Flexcom device The Flexcom device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 13:04:50 +00:00
CONFIG_MFD_ATMEL_FLEXCOM=y
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 14:19:37 +00:00
CONFIG_MFD_ATMEL_HLCDC=m
ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-27 06:10:55 +00:00
CONFIG_MFD_BCM590XX=y
ARM: multi_v7_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 22:08:45 +00:00
CONFIG_MFD_AC100=y
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in The AXP20X regulator support is currently built as a module, which means it's not available until the root fs has been mounted, but the boot loader might not have enabled the required regulators, so build their drivers into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 22:09:31 +00:00
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
ARM: multi_v7_defconfig: Build ChromeOS EC drivers as modules Since the multi_v7_defconfig is used to build an image for different platforms, the options should be enabled as module whenever possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-17 15:58:44 +00:00
CONFIG_MFD_CROS_EC=m
arm/arm64: configs: Remove the MFD_ prefix for MFD_CROS_EC_I2C/SPI symbols. The cros-ec I2C and SPI transport drivers have been moved from MFD subsystem to platform/chrome, at the same time, the config symbol has been renamed and lost the MFD_ prefix, so update all configs to the new config symbol name. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-07-02 10:22:00 +00:00
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_MFD_DA9063=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_MFD_MAX14577=y
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 21:24:24 +00:00
CONFIG_MFD_MAX77686=y
ARM: multi_v7_defconfig: Switch max77693 to module The driver can be built as a module, so use this possibility. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 07:54:19 +00:00
CONFIG_MFD_MAX77693=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MFD_MAX8907=y
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_MFD_MAX8997=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_MFD_MAX8998=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_MFD_CPCAP=y
mfd: qcom-pm8xxx: Clean up PM8XXX namespace The Kconfig and file naming for the PM8xxx driver is totally confusing: - Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel users depending on or selecting either at random. - A driver file named pm8921-core.c even if it is indeed used by the whole PM8xxx family of chips. - An irqchip named pm8xxx since it was (I guess) realized that the driver was generic for all pm8xxx PMICs. As I may want to add support for PM8901 this is starting to get really messy. Fix this situation by: - Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX and convert all users, including LEDs Kconfig and ARM defconfigs for qcom and multi_v7 to use that single symbol. - Renaming the driver to qcom-pm8xxx.c to fit along the two other qcom* prefixed drivers. - Rename functions withing the driver from 8921 to 8xxx to indicate it is generic. - Just drop the =m config from the pxa_defconfig, I have no clue why it is even there, it is not a Qualcomm platform. (Possibly older Kconfig noise from saveconfig.) Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-19 15:15:18 +00:00
CONFIG_MFD_PM8XXX=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 09:12:22 +00:00
CONFIG_MFD_QCOM_RPM=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 06:15:57 +00:00
CONFIG_MFD_SPMI_PMIC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MFD_RK808=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:39 +00:00
CONFIG_MFD_RN5T618=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 15:14:10 +00:00
CONFIG_MFD_SEC_CORE=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_MFD_STMPE=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
ARM: multi_v7_defconfig: enable TPS65217 regulator Enable TPS65217 regulator to have rootfs in MMC for Beagle Bone's. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-11-11 07:09:13 +00:00
CONFIG_MFD_TPS65217=y
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 Enable PMIC for AM437x platforms such as AM437x-sk similar to commit a186cf10da84 ("ARM: omap2plus_defconfig: enable TPS65218 configs"). This allows multi_v7_defconfig to boot up on AM437x-sk platform. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 18:42:59 +00:00
CONFIG_MFD_TPS65218=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_MFD_STM32_LPTIMER=m
ARM: multi_v7_defconfig: Enable common regulators for rockchip boards Rockchip boards seem to have two common regulator setups. Various board used the Active Semi act8846 often in combination with Silergy syr82x regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc), while others use regulator part of the Rockchip RK808 chip (e.g. the various Veyron based chromebooks, Chipspark Popmetal etc) Enable all these regulators. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:16 +00:00
CONFIG_REGULATOR_ACT8865=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_REGULATOR_ACT8945A=y
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ The Wandboard Quad can make use of the cpufreq support provided by the driver. Enable it and its dependency, REGULATOR_ANATOP, by default. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 18:08:12 +00:00
CONFIG_REGULATOR_ANATOP=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_REGULATOR_AB8500=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_REGULATOR_AS3711=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_AS3722=y
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in The AXP20X regulator support is currently built as a module, which means it's not available until the root fs has been mounted, but the boot loader might not have enabled the required regulators, so build their drivers into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 22:09:31 +00:00
CONFIG_REGULATOR_AXP20X=y
ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-27 06:10:55 +00:00
CONFIG_REGULATOR_BCM590XX=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_REGULATOR_CPCAP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_REGULATOR_DA9210=y
ARM: multi_v7_defconfig: Enable common regulators for rockchip boards Rockchip boards seem to have two common regulator setups. Various board used the Active Semi act8846 often in combination with Silergy syr82x regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc), while others use regulator part of the Rockchip RK808 chip (e.g. the various Veyron based chromebooks, Chipspark Popmetal etc) Enable all these regulators. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:16 +00:00
CONFIG_REGULATOR_FAN53555=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_GPIO=y
ARM: multi_v7_defconfig: Enable LP872x regulator support The LP872x regulator is used in the LG Optimus Black codename sniper to supply the external mmc card. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-28 12:39:45 +00:00
CONFIG_REGULATOR_LP872X=y
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_REGULATOR_MAX14577=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_MAX8907=y
ARM: multi_v7_defconfig: Add MAX8952 regulator driver Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 10:09:51 +00:00
CONFIG_REGULATOR_MAX8952=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_REGULATOR_MAX8973=y
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_REGULATOR_MAX8997=m
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_REGULATOR_MAX8998=m
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 21:24:24 +00:00
CONFIG_REGULATOR_MAX77686=y
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_REGULATOR_MAX77693=m
ARM: multi_v7_defconfig: Enable max77802 regulator The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides other devices, a set of regulators that can be controller over I2C. Commit f3caa529c6f5 ("ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers") was supposed to enable the config option for the regulator driver as a module but the final version that landed did not include this. The commit was modified and the REGULATOR_MAX77802 removed since it was thought to be useless. Unfortunately that's not the case for the mentioned reason above so this patch enables the needed Kconfig option. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: fixed ordering according to make savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-16 06:39:42 +00:00
CONFIG_REGULATOR_MAX77802=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_PALMAS=y
ARM: multi_v7_defconfig: Enable PBIAS regulator PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4, OMAP5 and DRA7 SoCs. Enable it here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-09-04 12:13:15 +00:00
CONFIG_REGULATOR_PBIAS=y
ARM: multi_v7_defconfig: Enable support for PWM Regulators Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-06-11 08:39:21 +00:00
CONFIG_REGULATOR_PWM=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 09:12:22 +00:00
CONFIG_REGULATOR_QCOM_RPM=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_RK808=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:39 +00:00
CONFIG_REGULATOR_RN5T618=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 15:14:10 +00:00
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_REGULATOR_STM32_VREFBUF=m
ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators ABB and PBIAS are internal LDO control regulators that are needed for maintaining proper functionality of OMAP architecture SoCs. Enable the same. PBIAS is already enabled, so just enable ABB regulator as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 18:43:00 +00:00
CONFIG_REGULATOR_TI_ABB=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_TPS65090=y
ARM: multi_v7_defconfig: enable TPS65217 regulator Enable TPS65217 regulator to have rootfs in MMC for Beagle Bone's. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-11-11 07:09:13 +00:00
CONFIG_REGULATOR_TPS65217=y
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 Enable PMIC for AM437x platforms such as AM437x-sk similar to commit a186cf10da84 ("ARM: omap2plus_defconfig: enable TPS65218 configs"). This allows multi_v7_defconfig to boot up on AM437x-sk platform. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 18:42:59 +00:00
CONFIG_REGULATOR_TPS65218=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:13 +00:00
CONFIG_REGULATOR_WM8994=m
ARM: multi_v7_defconfig: Make media support modular Make media support modular to reduce kernel size (-253 KiB): text data bss dec hex filename 12451039 1396476 339800 14187315 d87b33 vmlinux.before 12202692 1387244 338456 13928392 d487c8 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:39 +00:00
CONFIG_MEDIA_SUPPORT=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 09:10:04 +00:00
CONFIG_MEDIA_CEC_SUPPORT=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MEDIA_USB_SUPPORT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_USB_VIDEO_CLASS=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_V4L_PLATFORM_DRIVERS=y
STM32 defconfig updates for v4.19, round 1 Highlights: ---------- In multi_v7_defconfig, add support of: -STM32 RTC -STM32 DMA, DMAMUX and MDMA -STM32 DCMI media -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJbSKlMAAoJEH+ayWryHnCFvioQAI7dxJq7aQch9Is+xLULroR+ kSk5KkJqACcAXCZYQDsucmNtzPcz1HRu86t+u68Cb1W/lP99EczOz1d55o5XH4SL IHpRy/ouQB2kK+C1SXVVPhKI4/xafcNHwI+knvxFoaard/Q8t6x0UVwhm3osdP1T OF1lw7zP2i64DxJ3lDU5N93Lu6QPVHZwKJ7ayvxnx/S1FI4LpkhJV+qln2e6aSUg n94fltB/1dw5qSrGdFbSLU3QtaxAbLwUyAjxRB9GzrSUvtAMKdCQLTKF7QidgTY2 LaGPqd2K7R/i6djSLeFlU2QS+JYKpIiOVyTNwYl18gmuOCpd5o4IsRjmJqh0BARh 80cvB5klLFcItA2kMUnyV4IEc3fKEviIUgUEQJ0i09YCwC2G1rqiimsW9HUA1RB6 3nrHU3UWEJPQAR9EOYHcIzOm5EaDvIwXQnG3XHfQriaa5Shp2U+C9jjhKrAn08Kf zQlNTN2Z+g4wjG+izo/Fn60lCh9QGJUSJwqNVw286vhBAA/E5ebQyd6p4KHN71fs fDXjRC5hz5AMlOOnK+AzkspGcVrfojAPNgwfi8fRN88dxuoNApKjTRdT5u41evLr t2EniyKKQqC2K4ampAGOpoo0gunSnVO5gcgG3aBbvOip5YR9NT/epSbyznfOqZ0x SqQ5tmwCy82L2n3gMx+k =lU0N -----END PGP SIGNATURE----- Merge tag 'stm32-defconfig-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig STM32 defconfig updates for v4.19, round 1 Highlights: ---------- In multi_v7_defconfig, add support of: -STM32 RTC -STM32 DMA, DMAMUX and MDMA -STM32 DCMI media * tag 'stm32-defconfig-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: multi_v7_defconfig: enable STM32 DCMI media support ARM: multi_v7_defconfig: enable STM32 DMAv2, DMAMUX and MDMA ARM: multi_v7_defconfig: enable STM32 RTC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-14 21:38:11 +00:00
CONFIG_VIDEO_STM32_DCMI=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 13:29:40 +00:00
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_ATMEL_ISI=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 13:29:40 +00:00
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
ARM: multi_v7_defconfig: Enable Exynos MFC driver as module Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that can be used to {en,de}code video streams by hardware. Enable support for its driver as a module so the MFC can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-10 21:07:28 +00:00
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
ARM: multi_v7_defconfig: Enable exynos-gsc driver as module Exynos5 SoCs have a General SCALER (GSCALER) IP block that can be used to do video streams scaling and color space conversions by hardware. Enable support for its driver as a module so the GSCALER can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-10-05 14:24:29 +00:00
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-06-21 13:57:04 +00:00
CONFIG_VIDEO_STI_BDISP=m
ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver Enable HVA (Hardware Video Accelerator) video encoder driver for STMicroelectronics SoC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-11-23 08:25:23 +00:00
CONFIG_VIDEO_STI_HVA=m
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support Enables support of STMicroelectronics STiH4xx SoC series DELTA multi-format video decoder V4L2 driver. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-02 14:59:46 +00:00
CONFIG_VIDEO_STI_DELTA=m
ARM: multi_v7_defconfig: Enable VIDEO_RENESAS_FDP1 R-Car Gen2 (and RZ/G1) SoCs have a Fine Display Processor, hence enable support for it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-31 09:16:18 +00:00
CONFIG_VIDEO_RENESAS_FDP1=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_VIDEO_RENESAS_JPU=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_VIDEO_RENESAS_VSP1=m
ARM: multi_v7_defconfig: Enable vivid driver as a module The Virtual Video Test Driver can be used to emulate video capture and output devices so it's very useful for testing. Since is not necessary to boot, can be enabled as module to avoid increasing the kernel size. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-24 13:10:13 +00:00
CONFIG_V4L_TEST_DRIVERS=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_VIDEO_VIVID=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 09:10:04 +00:00
CONFIG_CEC_PLATFORM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 12:14:21 +00:00
CONFIG_VIDEO_ML86V7667=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_DRM=y
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 14:17:52 +00:00
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_NOUVEAU=m
ARM: multi_v7_defconfig: Enable options for Exynos display support Many Exynos devices have devices attached to their display ports. This patch enables the needed Kconfig options to support different configuration such as simple panel, embedded DisplayPort (eDP) to LVDS bridges and HDMI displays. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:10:05 +00:00
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_FIMD=y
ARM: multi_v7_defconfig: Enable Exynos DRM Mixer driver Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433 HDMI does not require Mixer and there are separate options to select Mixer and HDMI. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-29 14:25:06 +00:00
CONFIG_DRM_EXYNOS_MIXER=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_DRM_EXYNOS_DPI=y
CONFIG_DRM_EXYNOS_DSI=y
ARM: multi_v7_defconfig: Enable options for Exynos display support Many Exynos devices have devices attached to their display ports. This patch enables the needed Kconfig options to support different configuration such as simple panel, embedded DisplayPort (eDP) to LVDS bridges and HDMI displays. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:10:05 +00:00
CONFIG_DRM_EXYNOS_HDMI=y
ARM: multi_v7_defconfig: Enable Rockchip display support Enable options needed for HDMI out on rockchip: DRM driver, Rockchip DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM driver). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:17 +00:00
CONFIG_DRM_ROCKCHIP=m
multi_v7_defconfig: make Rockchip DRM drivers built-in These cause warnings in linux-next, as the symbols have become 'bool' there: arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-31 10:23:04 +00:00
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 14:19:37 +00:00
CONFIG_DRM_ATMEL_HLCDC=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_DRM_RCAR_DU=m
ARM: multi_v7_defconfig: enable HDMI output for Renesas RCar Actviate HDMI output of the RCar DU (and LVDS while we are here). Enable the HDMI encoder chip found on Lager/Koelsch boards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-12 07:12:22 +00:00
CONFIG_DRM_RCAR_LVDS=y
ARM: multi_v7: Enable sun4i DRM driver Enable the new DRM driver in the multi_v7 defconfig Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-11 20:32:41 +00:00
CONFIG_DRM_SUN4I=m
ARM: multi_v7_defconfig: add NXP graphics drivers Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:42 +00:00
CONFIG_DRM_FSL_DCU=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_DRM_TEGRA=y
ARM: multi_v7_defconfig: enable panels OTM8009A and RM68200 Enable panel OTM8009A and panel raydium RM68200 as loadable modules. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 09:18:18 +00:00
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
ARM: multi_v7_config: enable S6E63J0X03 panel driver Add a module with Samsung S6E63J0X03 DSI panel driver to enable support for display panel on Exynos3250-based Samsung Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-16 10:35:37 +00:00
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-14 12:57:14 +00:00
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DRM_DUMB_VGA_DAC=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 09:10:04 +00:00
CONFIG_DRM_SII9234=m
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel for Samsung Exynos5250-based Arndale board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 10:09:52 +00:00
CONFIG_DRM_TOSHIBA_TC358764=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-06-21 15:18:39 +00:00
CONFIG_DRM_STI=m
ARM: multi_v7_defconfig: enable STM32 DRM and MIPI DSI support Enable DRM and MIPI DSI support for STMicroelectronics as loadable module. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 09:12:54 +00:00
CONFIG_DRM_STM=m
CONFIG_DRM_STM_DSI=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DRM_VC4=m
ARM: multi_v7_defconfig: add NXP graphics drivers Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:42 +00:00
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_MXSFB=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_FB_ARMCLCD=y
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 14:28:20 +00:00
CONFIG_FB_EFI=y
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 08:11:40 +00:00
CONFIG_FB_WM8505=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_FB_SH_MOBILE_LCDC=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_FB_SIMPLE=y
ARM: multi_v7_defconfig: Enable options for Exynos display support Many Exynos devices have devices attached to their display ports. This patch enables the needed Kconfig options to support different configuration such as simple panel, embedded DisplayPort (eDP) to LVDS bridges and HDMI displays. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:10:05 +00:00
CONFIG_LCD_PLATFORM=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_BACKLIGHT_PWM=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_BACKLIGHT_AS3711=y
ARM: multi_v7_defconfig: enable backlight gpio Enable generic GPIO based backlight driver. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20 15:43:00 +00:00
CONFIG_BACKLIGHT_GPIO=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:38 +00:00
CONFIG_SOUND=m
CONFIG_SND=m
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 14:17:52 +00:00
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_HDMI=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 10:37:17 +00:00
CONFIG_SND_USB_AUDIO=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:38 +00:00
CONFIG_SND_SOC=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_ATMEL_SOC_WM8904=m
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver as a module. It's used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 16:02:22 +00:00
CONFIG_SND_ATMEL_SOC_PDMIC=m
ARM: multi_v7_defconfig: add Atmel I2S driver Add atmel-i2s driver CONFIG_SND_ATMEL_SOC_I2S. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 16:47:55 +00:00
CONFIG_SND_ATMEL_SOC_I2S=m
ARM: multi_v7_defconfig: Add more BCM2835 support The WDT is required for reboot and I2S is used for audio devices on the P5 header (or BT audio on the Pi3). Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-29 01:52:27 +00:00
CONFIG_SND_BCM2835_SOC_I2S=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_SND_SOC_FSL_SAI=m
ARM: multi_v7_defconfig: Add rockchip audio support As the rockchip SPDIF driver landed for 4.4 and the required clock patches to make it work properly are scheduled for the 4.5 merge window it seems time to support for audio device found on rockchip boards in the defconfig as well. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-08 12:16:46 +00:00
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:13 +00:00
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
CONFIG_SND_SOC_SMDK_WM8994_PCM=m
CONFIG_SND_SOC_SNOW=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 09:10:04 +00:00
CONFIG_SND_SOC_ODROID=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SND_SOC_STI=m
ARM: multi_v7_defconfig: Enable A10 audio codec driver as module The A10 audio codec driver supports the on-chip audio codec found on Allwinner A10, A10s, A13, A20 SoCs. Build it as a module, since it is not critical. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 15:53:48 +00:00
CONFIG_SND_SUN4I_CODEC=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:38 +00:00
CONFIG_SND_SOC_TEGRA=m
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to multi_v7_defconfig, as modules. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-30 11:22:20 +00:00
CONFIG_SND_SOC_TEGRA20_I2S=m
CONFIG_SND_SOC_TEGRA30_I2S=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:38 +00:00
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
ARM: tegra: Update multi_v7_defconfig Enable some options that have recently been enabled on Tegra platforms: * TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri * SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-20 12:42:30 +00:00
CONFIG_SND_SOC_TEGRA_WM9712=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 09:21:38 +00:00
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SND_SOC_AK4642=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SND_SOC_CPCAP=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_SND_SOC_SGTL5000=m
ARM: multi_v7_defconfig: Add rockchip audio support As the rockchip SPDIF driver landed for 4.4 and the required clock patches to make it work properly are scheduled for the 4.5 merge window it seems time to support for audio device found on rockchip boards in the defconfig as well. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-08 12:16:46 +00:00
CONFIG_SND_SOC_SPDIF=m
ARM: multi_v7_defconfig: Enable STi and simple-card drivers. This patch enables the STi ALSA drivers found on STi platforms as well as the simple-card driver which is a dependency to have working sound. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Cc: arnaud.pouliquen@st.com Cc: broonie@kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 09:39:16 +00:00
CONFIG_SND_SOC_STI_SAS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SIMPLE_SCU_CARD=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_USB=y
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules We can support USB OTG with MUSB driver on many ARM SoCs. Let's enable all the SoCs with MUSB as loadable modules. And let's enable their related DMA hardware. And as MUSB is an USB OTG controller, let's enable OTG support too. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 22:59:57 +00:00
CONFIG_USB_OTG=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_USB_XHCI_HCD=y
ARM: configs: enable XHCI mvebu support in multi_v7_defconfig The Marvell Armada 38x platform needs the xhci_mvebu driver enabled for the xHCI USB hosts, so this commit enables the corresponding Kconfig option in multi_v7_defconfig. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: arm@kernel.org Cc: Kevin Hilman <khilman@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-07 13:52:21 +00:00
CONFIG_USB_XHCI_MVEBU=y
ARM: multi_v7: Enable Tegra XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26 17:01:45 +00:00
CONFIG_USB_XHCI_TEGRA=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_USB_EHCI_HCD=y
ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers. Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 16:47:00 +00:00
CONFIG_USB_EHCI_HCD_STI=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_EXYNOS=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_USB_OHCI_HCD=y
ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers. Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 16:47:00 +00:00
CONFIG_USB_OHCI_HCD_STI=y
ARM: multi_v7_defconfig: Enable OHCI on exynos SoCs Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family, Exynos5250, Exynos5440 and Exynos542x/5800 family. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:09:41 +00:00
CONFIG_USB_OHCI_EXYNOS=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_USB_STORAGE=y
ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports UAS protocol. Enable support for it to make sure that all built-in storage devices are available. Enable it as module to keep in line with multi_v7 policy to enable drivers as build-in only if they are critical for boot process. On Odroid HC1 the kernel itself has to be still read from the SD-card, so assume that modules/initrd is also accessible there. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-03 10:13:32 +00:00
CONFIG_USB_UAS=m
ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed dual role controller for USB OTG. Now that the issue with MUSB and USB gadget registration order has been resolved, we can enable this driver in dual role mode. This patch only enables the driver core and Allwinner platform support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 15:53:49 +00:00
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules We can support USB OTG with MUSB driver on many ARM SoCs. Let's enable all the SoCs with MUSB as loadable modules. And let's enable their related DMA hardware. And as MUSB is an USB OTG controller, let's enable OTG support too. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 22:59:57 +00:00
CONFIG_USB_MUSB_TUSB6010=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_MUSB_UX500=m
CONFIG_USB_UX500_DMA=y
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_TUSB_OMAP_DMA=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 18:51:29 +00:00
CONFIG_USB_DWC3=y
ARM: multi_v7_defconfig: Build in DWC2 USB support This allows the Raspberry Pi 2 to be network booted from the defconfig. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-31 20:38:57 +00:00
CONFIG_USB_DWC2=y
ARM: multi_v7_defconfig: Select USB chipidea driver CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 17:02:06 +00:00
CONFIG_USB_CHIPIDEA=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_USB_CHIPIDEA_UDC=y
ARM: multi_v7_defconfig: Select USB chipidea driver CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 17:02:06 +00:00
CONFIG_USB_CHIPIDEA_HOST=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_AB8500_USB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_KEYSTONE_USB_PHY=m
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants With MUSB USB OTG controller enabled, let's now enable the USB PHYs found on omap varian SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 16:39:09 +00:00
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
CONFIG_TWL6030_USB=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_USB_GADGET=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_USB_FSL_USB2=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_USB_RENESAS_USBHS_UDC=m
ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module With USB OTG now enabled, it makes sense to allow configuring the USB gadgets via configfs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 23:06:19 +00:00
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-19 08:19:37 +00:00
CONFIG_USB_ETH=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_MMC=y
ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-03 18:21:49 +00:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
ARM: multi_v7_defconfig: re-enable SDHCI drivers Following 5d01b7684b7e "mmc: simplify SDHCI Kconfig dependencies", SDHCI drivers that use MMC_SDHCI_PLTFM no longer select it, but instead depend on it. This means that multi_v7_defconfig no longer selects it, and hence many SDHCI drivers are no longer enabled. Explicitly enable MMC_SDHCI_PLTFM to solve this. Fixes: 5d01b7684b7e ("mmc: simplify SDHCI Kconfig dependencies") Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-16 16:50:42 +00:00
CONFIG_MMC_SDHCI_PLTFM=y
ARM: multi_v7_defconfig: Enable Zynq peripheral drivers A few drivers for Zynq peripherals made it into mainline recently. Enable them in the defconfig. The following devices are enabled: - Cadence Macb Ethernet controller - Cadence I2C controller - Arasan SDHCI Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 17:04:28 +00:00
CONFIG_MMC_SDHCI_OF_ARASAN=y
ARM: multi_v7_defconfig: Add Atmel SDHCI device The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 13:04:51 +00:00
CONFIG_MMC_SDHCI_OF_AT91=y
ARM: multi_v7_defconfig: make eSDHC driver built-in Sometimes root file system is deployed on SD card. It's proper to build eSDHC driver into kernel. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-01 02:32:02 +00:00
CONFIG_MMC_SDHCI_OF_ESDHC=y
ARM: multi_v7_defconfig: add SDHCI for i.MX Turn on SDHCI for i.MX support so machines can boot with local rootfs on SD. Tested on a Wandboard Quad. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-30 00:34:45 +00:00
CONFIG_MMC_SDHCI_ESDHC_IMX=y
ARM: add Marvell Dove and some drivers to multi_v7 defconfig With Marvell Dove now being part of the multi_v7 family, add some Dove specific drivers to multi_v7 defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-27 21:28:05 +00:00
CONFIG_MMC_SDHCI_DOVE=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_MMC_SDHCI_TEGRA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MMC_SDHCI_S3C=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_MMC_SDHCI_PXAV3=y
ARM: spear: enable spear13xx in multi_v7_defconfig SPEAr13xx can now be part of the regular multiplatform defconfig, so let's enable it there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 16:32:16 +00:00
CONFIG_MMC_SDHCI_SPEAR=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 15:14:10 +00:00
CONFIG_MMC_SDHCI_S3C_DMA=y
ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-03 18:21:49 +00:00
CONFIG_MMC_SDHCI_BCM_KONA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MMC_MESON_MX_SDIO=y
ARM: update multi_v7_defconfig for STI This patch enables SDHCI STI platform driver. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-07-09 15:07:00 +00:00
CONFIG_MMC_SDHCI_ST=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_MMC_ATMELMCI=y
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 22:47:50 +00:00
CONFIG_MMC_SDHCI_MSM=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_MMC_MVSDIO=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_MMC_SDHI=y
ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER Enable the UniPhier SD controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-03 00:18:22 +00:00
CONFIG_MMC_UNIPHIER=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 15:14:10 +00:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP Allows booting from SD/MMC on RK3288 and other platforms. Added here so I can enable the board in the boot farm. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-20 07:18:50 +00:00
CONFIG_MMC_DW_ROCKCHIP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-08 09:19:07 +00:00
CONFIG_MMC_BCM2835=y
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's can use sdhci-omap for eMMC/SD/SDIO controller.. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 12:57:52 +00:00
CONFIG_MMC_SDHCI_OMAP=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:08 +00:00
CONFIG_LEDS_CLASS_FLASH=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_LEDS_CPCAP=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_LEDS_GPIO=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-09 22:49:50 +00:00
CONFIG_LEDS_PWM=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:08 +00:00
CONFIG_LEDS_MAX77693=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_LEDS_MAX8997=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
ARM: multi_v7_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 22:08:45 +00:00
CONFIG_RTC_DRV_AC100=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_RTC_DRV_AS3722=y
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 21:31:50 +00:00
CONFIG_RTC_DRV_DS1307=y
ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards Similar to the power management situation on Rockchip boards, there are two common RTC setups. For boards using the RK808 chip as a PMIC that chip also serves as the RTC, while boards using the ACT8846 typically use the Haoyu Microelectronics HYM8563 chip as their RTC. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:19 +00:00
CONFIG_RTC_DRV_HYM8563=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_RTC_DRV_MAX8907=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:14 +00:00
CONFIG_RTC_DRV_MAX8998=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 01:27:07 +00:00
CONFIG_RTC_DRV_MAX8997=m
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 21:24:24 +00:00
CONFIG_RTC_DRV_MAX77686=y
ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards Similar to the power management situation on Rockchip boards, there are two common RTC setups. For boards using the RK808 chip as a PMIC that chip also serves as the RTC, while boards using the ACT8846 typically use the Haoyu Microelectronics HYM8563 chip as their RTC. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:19 +00:00
CONFIG_RTC_DRV_RK808=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_RTC_DRV_RS5C372=m
ARM: multi_v7_defconfig: Enable BQ32000 RTC driver The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the multi_v7_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-18 11:12:38 +00:00
CONFIG_RTC_DRV_BQ32K=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_RTC_DRV_TWL4030=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_RTC_DRV_PALMAS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_RTC_DRV_S35390A=m
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 12:14:21 +00:00
CONFIG_RTC_DRV_RX8581=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_RTC_DRV_EM3027=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_RTC_DRV_S5M=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_RTC_DRV_DA9063=m
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 14:28:20 +00:00
CONFIG_RTC_DRV_EFI=m
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 10:59:44 +00:00
CONFIG_RTC_DRV_DIGICOLOR=m
ARM: multi_v7_defconfig: Enable Samsung S3C SoC RTC The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found on many Samsung SoCs. Build the driver as a module to support these RTC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:07:57 +00:00
CONFIG_RTC_DRV_S3C=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_RTC_DRV_PL031=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 08:11:40 +00:00
CONFIG_RTC_DRV_VT8500=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 17:21:13 +00:00
CONFIG_RTC_DRV_SUNXI=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_RTC_DRV_MV=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_RTC_DRV_TEGRA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_RTC_DRV_ST_LPC=y
ARM: multi_v7_defconfig: enable STM32 RTC Enable the STM32 Real Time Clock (RTC) driver, implemented on STM32MP1 SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-05-17 12:07:00 +00:00
CONFIG_RTC_DRV_STM32=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_RTC_DRV_CPCAP=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 19:39:25 +00:00
CONFIG_DMADEVICES=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_FSL_EDMA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_IMX_DMA=y
CONFIG_IMX_SDMA=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 23:20:07 +00:00
CONFIG_MV_XOR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_MXS_DMA=y
CONFIG_PL330_DMA=y
CONFIG_SIRF_DMA=y
CONFIG_STE_DMA40=y
CONFIG_ST_FDMA=m
ARM: multi_v7_defconfig: enable STM32 DMAv2, DMAMUX and MDMA This enables drivers for STM32: - DMAv2 - DMMAUX - MDMA Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-05-28 09:08:00 +00:00
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_TEGRA20_APB_DMA=y
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC Enable the UniPhier MIO DMAC driver. This is used as the DMA engine for accelerating the SD/eMMC controller drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-21 08:51:24 +00:00
CONFIG_UNIPHIER_MDMAC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_XILINX_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_DW_DMAC=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:26 +00:00
CONFIG_RENESAS_USB_DMAC=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_MMIO=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_STAGING=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 17:38:24 +00:00
CONFIG_NVEC_PAZ00=y
ARM: multi_v7_defconfig: Enable frame buffer console for armadillo800eva Enabling the frame buffer device on r8a7740/armadillo800eva requires the board staging code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 10:45:27 +00:00
CONFIG_STAGING_BOARD=y
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 21:24:24 +00:00
CONFIG_COMMON_CLK_MAX77686=y
ARM: multi_v7_defconfig: enable rk808 clkout module The rk808 supplies two clock outputs with one going back into the soc as 32kHz supply, supplying some core soc clocks with it. The system can boot without it being present, but it is needed for example as source clock for the thermal driver. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 21:22:28 +00:00
CONFIG_COMMON_CLK_RK808=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 06:06:10 +00:00
CONFIG_COMMON_CLK_S2MPS11=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_CLK_RPM=y
ARM: multi_v7_defconfig: fix support for APQ8084 This patch enables configs required to boot IFC6540 board with atleast a serial console. Without this patch there is no serial console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-21 18:55:20 +00:00
CONFIG_APQ_MMCC_8084=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 20:34:05 +00:00
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_BCM2835_MBOX=y
ARM: multi_v7_defconfig: Enable Rockchip display support Enable options needed for HDMI out on rockchip: DRM driver, Rockchip DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM driver). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:17 +00:00
CONFIG_ROCKCHIP_IOMMU=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
ARM: multi_v7_defconfig: Enable remoteproc core Now that remoteproc core is selectable it needs to be enabled in the multi_v7 build. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 09:39:13 +00:00
CONFIG_REMOTEPROC=m
ARM: multi_v7_defconfig: Enable st_remoteproc driver. The st231 remote coprocessors are found on all STi chipsets. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 09:39:14 +00:00
CONFIG_ST_REMOTEPROC=m
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module The RPMSG_VIRTIO is now user selectable option so we explicitly select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was selected by ST_REMOTEPROC=m in multi_v7_defconfig. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-05 16:49:58 +00:00
CONFIG_RPMSG_VIRTIO=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
ARM: multi_v7_defconfig: Enable Tegra ACTMON support This brings the DevFreq framework in and builds the ACTMON driver that on Tegra124 will scale the external memory clock based on current load. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 14:40:13 +00:00
CONFIG_PM_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=m
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 18:51:29 +00:00
CONFIG_TI_AEMIF=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_IIO=y
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 12:05:28 +00:00
CONFIG_IIO_SW_TRIGGER=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_AT91_ADC=m
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver Add the new sama5d2-compatible ADC driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 16:04:36 +00:00
CONFIG_AT91_SAMA5D2_ADC=m
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 14:02:50 +00:00
CONFIG_BERLIN2_ADC=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 14:10:24 +00:00
CONFIG_CPCAP_ADC=m
ARM: multi_v7_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable module support for its driver and also for the needed Exynos ADC driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-15 16:32:44 +00:00
CONFIG_EXYNOS_ADC=m
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_STM32_ADC_CORE=m
CONFIG_STM32_ADC=m
CONFIG_STM32_DFSDM_ADC=m
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-11 02:10:52 +00:00
CONFIG_VF610_ADC=m
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 15:54:26 +00:00
CONFIG_XILINX_XADC=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_STM32_DAC=m
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 12:05:28 +00:00
CONFIG_MPU3050_I2C=y
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:13 +00:00
CONFIG_CM36651=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_AK8975=y
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 12:05:28 +00:00
CONFIG_IIO_HRTIMER_TRIGGER=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_IIO_STM32_LPTIMER_TRIGGER=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_PWM=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_PWM_ATMEL=m
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 14:19:37 +00:00
CONFIG_PWM_ATMEL_HLCDC_PWM=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 09:01:18 +00:00
CONFIG_PWM_ATMEL_TCB=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BRCMSTB=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 08:41:39 +00:00
CONFIG_PWM_FSL_FTM=m
ARM: multi_v7_defconfig: enable the Meson PWM controller This enables the Amlogic Meson PWM controller. It is used for a dimmable LED on some devices. Additionally some devices use it to generate the 32.768 kHz (low power oscillator) clock. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-22 10:38:05 +00:00
CONFIG_PWM_MESON=m
ARM: multi_v7_defconfig: Select PWM_RCAR as module Enable PWM support for R-Car and friends by default. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-19 13:57:17 +00:00
CONFIG_PWM_RCAR=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 14:14:45 +00:00
CONFIG_PWM_RENESAS_TPU=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 11:39:15 +00:00
CONFIG_PWM_ROCKCHIP=m
ARM: multi_v7_defconfig: Enable Samsung PWM support Build the Generic PWM Samsung driver as a module to support PWM devices used in platforms with a Samsung SoC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 04:05:57 +00:00
CONFIG_PWM_SAMSUNG=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PWM_STI=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 11:22:01 +00:00
CONFIG_PWM_STM32=m
CONFIG_PWM_STM32_LP=m
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 14:56:42 +00:00
CONFIG_PWM_SUN4I=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_PWM_TEGRA=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_PWM_VT8500=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_KEYSTONE_IRQ=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
ARM: multi_v7_defconfig: add driver support for hix5hd2 Tested on hix5hd2 platform with mmc, usb, network, reboot etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-25 07:37:26 +00:00
CONFIG_PHY_HIX5HD2_SATA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PHY_BERLIN_SATA=y
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 14:02:50 +00:00
CONFIG_PHY_BERLIN_USB=y
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants With MUSB USB OTG controller enabled, let's now enable the USB PHYs found on omap varian SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 16:39:09 +00:00
CONFIG_PHY_CPCAP_USB=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PHY_QCOM_APQ8064_SATA=m
CONFIG_PHY_RCAR_GEN2=m
ARM: multi_v7_defconfig: Enable Rockchip displayport phy The displayport phy controls the output of the Analogix displayport controller on Rockchip SoCs and is therefore one component to enable veyron devices to use their internal display. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12 01:18:39 +00:00
CONFIG_PHY_ROCKCHIP_DP=m
multi_v7_defconfig: make Rockchip usb2-phy built-in The phy is necessary for the dwc2 controllers driving the usb ports on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream drivers (mass-storage as well as usb networking) are already built-in, so only the phy is missing to allow booting from usb-devices without to much hassle. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-03 10:22:12 +00:00
CONFIG_PHY_ROCKCHIP_USB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PHY_SAMSUNG_USB2=m
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-14 09:54:00 +00:00
CONFIG_PHY_MIPHY28LP=y
ARM: multi_v7_defconfig: Enable stih407 usb picophy This patch enables the picoPHY usb phy which is used by the usb2 and usb3 host controllers when controlling usb2/1.1 devices. It is found in stih407 family SoC's from STMicroelectronics. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-07 15:04:00 +00:00
CONFIG_PHY_STIH407_USB=y
ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support This patch adds STM32F7 I2C support to multi_v7_defconfig and enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on STM32MP1 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-04 12:46:55 +00:00
CONFIG_PHY_STM32_USBPHYC=y
ARM: multi_v7: Enable Tegra XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26 17:01:45 +00:00
CONFIG_PHY_TEGRA_XUSB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_PHY_DM816X_USB=m
ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs Enable the USB3 and USB2 phys implemented in UniPhier SoCs. These phys are necessary for dwc3 and ehci controllers driving the USB ports on Pro4 and PXs2 SoCs. Since the USB host drivers are already built-in, so only the phy driver are missing to allow booting with USB devices. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-01 08:10:21 +00:00
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_USB2=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:36 +00:00
CONFIG_NVMEM_IMX_OCOTP=y
ARM: sunxi: Re-enable SID driver in multi_v7_defconfig Commit 3d0b16a66c8a ("nvmem: sunxi: Move the SID driver to the nvmem framework") moved the the sunxi SID driver to a new framework, but left multi_v7_defconfig with the deprecated config symbol EEPROM_SUNXI_SID instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver in multi_v7_defconfig. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-19 21:33:43 +00:00
CONFIG_NVMEM_SUNXI_SID=y
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 20:34:36 +00:00
CONFIG_NVMEM_VF610_OCOTP=y
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_RASPBERRYPI_FIRMWARE=y
ARM: multi_v7_defconfig: fix config typo s/CONFIG_CONFIG_BCM47XX_NVRAM/CONFIG_BCM47XX_NVRAM/ Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-02 09:24:56 +00:00
CONFIG_BCM47XX_NVRAM=y
ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers Add a bunch of required drivers and subsystems: - BCMA is the on-chip discoverable bus which registers a bunch of peripherals - Enable the BCM47xx watchdog driver to get working system reboot - Enable the BCM47xx NVRAM/SPROM drivers to be able to fetch MAC addresses and other variables needed for system operation - Make BGMAC (built-in Ethernet adapter) a module Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-27 23:12:32 +00:00
CONFIG_BCM47XX_SPROM=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_EFI_VARS=m
CONFIG_EFI_CAPSULE_LOADER=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_EXT4_FS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_VFAT_FS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_NTFS_FS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
ARM: multi_v7_defconfig: enable pstore configs It's useful to get testing on these features on various boards (e.g., on KernelCI), and (when they're working) the ramoops feature is extremely helpful for debugging live systems. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-09 20:52:50 +00:00
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 08:12:58 +00:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 21:03:17 +00:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26 01:36:05 +00:00
CONFIG_PRINTK_TIME=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 20:41:32 +00:00
CONFIG_MAGIC_SYSRQ=y
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 16:26:54 +00:00
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver This enables the new driver for Marvell CESA crypto engines on all ARMv7. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-18 08:44:54 +00:00
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 16:26:54 +00:00
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
ARM: multi_v7_defconfig: Enable s5p-secss driver The Exynos SoC provides a Security SubSystem block for accelerating some cryptographic operations. Enable the driver for it - s5p-secss to utilize the hardware acceleration. Currently the s5p-secss driver supports AES in CBC and ECB modes. However its usefulness could be doubted. Excerpt of tests on Odroid XU3 (Exynos5422), for 256 bit key, encryption, performance CPU freq governor: algorithm | block size [b] | average speed [MB/s] | cbc-aes-s5p | 16 | 11.5 | cbc-aes-s5p | 64 | 25.4 | cbc-aes-s5p | 256 | 41.0 | cbc-aes-s5p | 1024 | 47.4 | cbc-aes-s5p | 8192 | 49.0 | cbc(aes-generic) | 16 | 0.4 | cbc(aes-generic) | 64 | 1.8 | cbc(aes-generic) | 256 | 6.6 | cbc(aes-generic) | 1024 | 25.2 | cbc(aes-generic) | 8192 | 83.1 | Anyway enable the driver so it will get some testing coverage by community. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 05:55:15 +00:00
CONFIG_CRYPTO_DEV_S5P=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 14:56:42 +00:00
CONFIG_CRYPTO_DEV_SUN4I_SS=m
ARM: multi_v7_defconfig: enable rockchip crypto module This enables the newly added hardware crypto module found for example on the rk3288. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 21:21:55 +00:00
CONFIG_CRYPTO_DEV_ROCKCHIP=m
ARM: multi_v7_defconfig: enable asm and NEON accelerated crypto modules Enable all drivers under CONFIG_ARM_CRYPTO as modules. Enable CONFIG_KERNEL_MODE_NEON as well so that the modules that either contain a NEON alternative or consist solely of a NEON (or ARMv8 crypto extensions) accelerated implementation are enabled fully as well. Note that the ARMv8 modules will only be built if the detected toolchain version is recent enough (binutils 2.23 or higher). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-11 10:06:38 +00:00
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_CRYPTO_SHA2_ARM_CE=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_AES_ARM_CE=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 17:24:23 +00:00
CONFIG_CRYPTO_CRC32_ARM_CE=m
CONFIG_CRYPTO_CHACHA20_NEON=m
Reference in New Issue Copy Permalink