linux/drivers/xen/events.c

1430 lines
32 KiB
C
Raw Normal View History

/*
* Xen event channels
*
* Xen models interrupts with abstract event channels. Because each
* domain gets 1024 event channels, but NR_IRQ is not that large, we
* must dynamically map irqs<->event channels. The event channels
* interface with the rest of the kernel by defining a xen interrupt
* chip. When an event is recieved, it is mapped to an irq and sent
* through the normal interrupt processing path.
*
* There are four kinds of events which can be mapped to an event
* channel:
*
* 1. Inter-domain notifications. This includes all the virtual
* device events, since they're driven by front-ends in another domain
* (typically dom0).
* 2. VIRQs, typically used for timers. These are per-cpu events.
* 3. IPIs.
* 4. PIRQs - Hardware interrupts.
*
* Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
*/
#include <linux/linkage.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/bootmem.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/irqnr.h>
#include <asm/desc.h>
#include <asm/ptrace.h>
#include <asm/irq.h>
#include <asm/idle.h>
#include <asm/io_apic.h>
#include <asm/sync_bitops.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
#include <xen/xen.h>
#include <xen/hvm.h>
#include <xen/xen-ops.h>
#include <xen/events.h>
#include <xen/interface/xen.h>
#include <xen/interface/event_channel.h>
#include <xen/interface/hvm/hvm_op.h>
#include <xen/interface/hvm/params.h>
/*
* This lock protects updates to the following mapping and reference-count
* arrays. The lock does not need to be acquired to read the mapping tables.
*/
static DEFINE_SPINLOCK(irq_mapping_update_lock);
/* IRQ <-> VIRQ mapping. */
static DEFINE_PER_CPU(int [NR_VIRQS], virq_to_irq) = {[0 ... NR_VIRQS-1] = -1};
/* IRQ <-> IPI mapping */
static DEFINE_PER_CPU(int [XEN_NR_IPIS], ipi_to_irq) = {[0 ... XEN_NR_IPIS-1] = -1};
/* Interrupt types. */
enum xen_irq_type {
IRQT_UNBOUND = 0,
IRQT_PIRQ,
IRQT_VIRQ,
IRQT_IPI,
IRQT_EVTCHN
};
/*
* Packed IRQ information:
* type - enum xen_irq_type
* event channel - irq->event channel mapping
* cpu - cpu this event channel is bound to
* index - type-specific information:
* PIRQ - vector, with MSB being "needs EIO", or physical IRQ of the HVM
* guest, or GSI (real passthrough IRQ) of the device.
* VIRQ - virq number
* IPI - IPI vector
* EVTCHN -
*/
struct irq_info
{
enum xen_irq_type type; /* type */
unsigned short evtchn; /* event channel */
unsigned short cpu; /* cpu bound */
union {
unsigned short virq;
enum ipi_vector ipi;
struct {
unsigned short pirq;
unsigned short gsi;
unsigned char vector;
unsigned char flags;
} pirq;
} u;
};
#define PIRQ_NEEDS_EOI (1 << 0)
#define PIRQ_SHAREABLE (1 << 1)
static struct irq_info *irq_info;
static int *pirq_to_irq;
static int nr_pirqs;
static int *evtchn_to_irq;
struct cpu_evtchn_s {
unsigned long bits[NR_EVENT_CHANNELS/BITS_PER_LONG];
};
static __initdata struct cpu_evtchn_s init_evtchn_mask = {
.bits[0 ... (NR_EVENT_CHANNELS/BITS_PER_LONG)-1] = ~0ul,
};
static struct cpu_evtchn_s *cpu_evtchn_mask_p = &init_evtchn_mask;
static inline unsigned long *cpu_evtchn_mask(int cpu)
{
return cpu_evtchn_mask_p[cpu].bits;
}
/* Xen will never allocate port zero for any purpose. */
#define VALID_EVTCHN(chn) ((chn) != 0)
static struct irq_chip xen_dynamic_chip;
static struct irq_chip xen_percpu_chip;
static struct irq_chip xen_pirq_chip;
/* Constructor for packed IRQ information. */
static struct irq_info mk_unbound_info(void)
{
return (struct irq_info) { .type = IRQT_UNBOUND };
}
static struct irq_info mk_evtchn_info(unsigned short evtchn)
{
return (struct irq_info) { .type = IRQT_EVTCHN, .evtchn = evtchn,
.cpu = 0 };
}
static struct irq_info mk_ipi_info(unsigned short evtchn, enum ipi_vector ipi)
{
return (struct irq_info) { .type = IRQT_IPI, .evtchn = evtchn,
.cpu = 0, .u.ipi = ipi };
}
static struct irq_info mk_virq_info(unsigned short evtchn, unsigned short virq)
{
return (struct irq_info) { .type = IRQT_VIRQ, .evtchn = evtchn,
.cpu = 0, .u.virq = virq };
}
static struct irq_info mk_pirq_info(unsigned short evtchn, unsigned short pirq,
unsigned short gsi, unsigned short vector)
{
return (struct irq_info) { .type = IRQT_PIRQ, .evtchn = evtchn,
.cpu = 0,
.u.pirq = { .pirq = pirq, .gsi = gsi, .vector = vector } };
}
/*
* Accessors for packed IRQ information.
*/
static struct irq_info *info_for_irq(unsigned irq)
{
return &irq_info[irq];
}
static unsigned int evtchn_from_irq(unsigned irq)
{
return info_for_irq(irq)->evtchn;
}
unsigned irq_from_evtchn(unsigned int evtchn)
{
return evtchn_to_irq[evtchn];
}
EXPORT_SYMBOL_GPL(irq_from_evtchn);
static enum ipi_vector ipi_from_irq(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info == NULL);
BUG_ON(info->type != IRQT_IPI);
return info->u.ipi;
}
static unsigned virq_from_irq(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info == NULL);
BUG_ON(info->type != IRQT_VIRQ);
return info->u.virq;
}
static unsigned pirq_from_irq(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info == NULL);
BUG_ON(info->type != IRQT_PIRQ);
return info->u.pirq.pirq;
}
static unsigned gsi_from_irq(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info == NULL);
BUG_ON(info->type != IRQT_PIRQ);
return info->u.pirq.gsi;
}
static unsigned vector_from_irq(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info == NULL);
BUG_ON(info->type != IRQT_PIRQ);
return info->u.pirq.vector;
}
static enum xen_irq_type type_from_irq(unsigned irq)
{
return info_for_irq(irq)->type;
}
static unsigned cpu_from_irq(unsigned irq)
{
return info_for_irq(irq)->cpu;
}
static unsigned int cpu_from_evtchn(unsigned int evtchn)
{
int irq = evtchn_to_irq[evtchn];
unsigned ret = 0;
if (irq != -1)
ret = cpu_from_irq(irq);
return ret;
}
static bool pirq_needs_eoi(unsigned irq)
{
struct irq_info *info = info_for_irq(irq);
BUG_ON(info->type != IRQT_PIRQ);
return info->u.pirq.flags & PIRQ_NEEDS_EOI;
}
static inline unsigned long active_evtchns(unsigned int cpu,
struct shared_info *sh,
unsigned int idx)
{
return (sh->evtchn_pending[idx] &
cpu_evtchn_mask(cpu)[idx] &
~sh->evtchn_mask[idx]);
}
static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
{
int irq = evtchn_to_irq[chn];
BUG_ON(irq == -1);
#ifdef CONFIG_SMP
cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu));
#endif
__clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
__set_bit(chn, cpu_evtchn_mask(cpu));
irq_info[irq].cpu = cpu;
}
static void init_evtchn_cpu_bindings(void)
{
#ifdef CONFIG_SMP
struct irq_desc *desc;
int i;
/* By default all event channels notify CPU#0. */
for_each_irq_desc(i, desc) {
cpumask_copy(desc->affinity, cpumask_of(0));
}
#endif
memset(cpu_evtchn_mask(0), ~0, sizeof(cpu_evtchn_mask(0)));
}
static inline void clear_evtchn(int port)
{
struct shared_info *s = HYPERVISOR_shared_info;
sync_clear_bit(port, &s->evtchn_pending[0]);
}
static inline void set_evtchn(int port)
{
struct shared_info *s = HYPERVISOR_shared_info;
sync_set_bit(port, &s->evtchn_pending[0]);
}
static inline int test_evtchn(int port)
{
struct shared_info *s = HYPERVISOR_shared_info;
return sync_test_bit(port, &s->evtchn_pending[0]);
}
/**
* notify_remote_via_irq - send event to remote end of event channel via irq
* @irq: irq of event channel to send event to
*
* Unlike notify_remote_via_evtchn(), this is safe to use across
* save/restore. Notifications on a broken connection are silently
* dropped.
*/
void notify_remote_via_irq(int irq)
{
int evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn))
notify_remote_via_evtchn(evtchn);
}
EXPORT_SYMBOL_GPL(notify_remote_via_irq);
static void mask_evtchn(int port)
{
struct shared_info *s = HYPERVISOR_shared_info;
sync_set_bit(port, &s->evtchn_mask[0]);
}
static void unmask_evtchn(int port)
{
struct shared_info *s = HYPERVISOR_shared_info;
unsigned int cpu = get_cpu();
BUG_ON(!irqs_disabled());
/* Slow path (hypercall) if this is a non-local port. */
if (unlikely(cpu != cpu_from_evtchn(port))) {
struct evtchn_unmask unmask = { .port = port };
(void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask);
} else {
struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
sync_clear_bit(port, &s->evtchn_mask[0]);
/*
* The following is basically the equivalent of
* 'hw_resend_irq'. Just like a real IO-APIC we 'lose
* the interrupt edge' if the channel is masked.
*/
if (sync_test_bit(port, &s->evtchn_pending[0]) &&
!sync_test_and_set_bit(port / BITS_PER_LONG,
&vcpu_info->evtchn_pending_sel))
vcpu_info->evtchn_upcall_pending = 1;
}
put_cpu();
}
static int get_nr_hw_irqs(void)
{
int ret = 1;
#ifdef CONFIG_X86_IO_APIC
ret = get_nr_irqs_gsi();
#endif
return ret;
}
/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
* succeeded otherwise nr_pirqs won't hold the right value */
static int find_unbound_pirq(void)
{
int i;
for (i = nr_pirqs-1; i >= 0; i--) {
if (pirq_to_irq[i] < 0)
return i;
}
return -1;
}
static int find_unbound_irq(void)
{
struct irq_data *data;
int irq, res;
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
int start = get_nr_hw_irqs();
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
if (start == nr_irqs)
goto no_irqs;
/* nr_irqs is a magic value. Must not use it.*/
for (irq = nr_irqs-1; irq > start; irq--) {
data = irq_get_irq_data(irq);
/* only 0->15 have init'd desc; handle irq > 16 */
if (!data)
break;
if (data->chip == &no_irq_chip)
break;
if (data->chip != &xen_dynamic_chip)
continue;
if (irq_info[irq].type == IRQT_UNBOUND)
return irq;
}
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
if (irq == start)
goto no_irqs;
res = irq_alloc_desc_at(irq, 0);
if (WARN_ON(res != irq))
return -1;
return irq;
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
no_irqs:
panic("No available IRQ to bind to: increase nr_irqs!\n");
}
static bool identity_mapped_irq(unsigned irq)
{
/* identity map all the hardware irqs */
return irq < get_nr_hw_irqs();
}
static void pirq_unmask_notify(int irq)
{
struct physdev_eoi eoi = { .irq = pirq_from_irq(irq) };
if (unlikely(pirq_needs_eoi(irq))) {
int rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
WARN_ON(rc);
}
}
static void pirq_query_unmask(int irq)
{
struct physdev_irq_status_query irq_status;
struct irq_info *info = info_for_irq(irq);
BUG_ON(info->type != IRQT_PIRQ);
irq_status.irq = pirq_from_irq(irq);
if (HYPERVISOR_physdev_op(PHYSDEVOP_irq_status_query, &irq_status))
irq_status.flags = 0;
info->u.pirq.flags &= ~PIRQ_NEEDS_EOI;
if (irq_status.flags & XENIRQSTAT_needs_eoi)
info->u.pirq.flags |= PIRQ_NEEDS_EOI;
}
static bool probing_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
return desc && desc->action == NULL;
}
static unsigned int startup_pirq(unsigned int irq)
{
struct evtchn_bind_pirq bind_pirq;
struct irq_info *info = info_for_irq(irq);
int evtchn = evtchn_from_irq(irq);
int rc;
BUG_ON(info->type != IRQT_PIRQ);
if (VALID_EVTCHN(evtchn))
goto out;
bind_pirq.pirq = pirq_from_irq(irq);
/* NB. We are happy to share unless we are probing. */
bind_pirq.flags = info->u.pirq.flags & PIRQ_SHAREABLE ?
BIND_PIRQ__WILL_SHARE : 0;
rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq, &bind_pirq);
if (rc != 0) {
if (!probing_irq(irq))
printk(KERN_INFO "Failed to obtain physical IRQ %d\n",
irq);
return 0;
}
evtchn = bind_pirq.port;
pirq_query_unmask(irq);
evtchn_to_irq[evtchn] = irq;
bind_evtchn_to_cpu(evtchn, 0);
info->evtchn = evtchn;
out:
unmask_evtchn(evtchn);
pirq_unmask_notify(irq);
return 0;
}
static void shutdown_pirq(unsigned int irq)
{
struct evtchn_close close;
struct irq_info *info = info_for_irq(irq);
int evtchn = evtchn_from_irq(irq);
BUG_ON(info->type != IRQT_PIRQ);
if (!VALID_EVTCHN(evtchn))
return;
mask_evtchn(evtchn);
close.port = evtchn;
if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0)
BUG();
bind_evtchn_to_cpu(evtchn, 0);
evtchn_to_irq[evtchn] = -1;
info->evtchn = 0;
}
static void enable_pirq(unsigned int irq)
{
startup_pirq(irq);
}
static void disable_pirq(unsigned int irq)
{
}
static void ack_pirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
move_native_irq(irq);
if (VALID_EVTCHN(evtchn)) {
mask_evtchn(evtchn);
clear_evtchn(evtchn);
}
}
static void end_pirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
struct irq_desc *desc = irq_to_desc(irq);
if (WARN_ON(!desc))
return;
if ((desc->status & (IRQ_DISABLED|IRQ_PENDING)) ==
(IRQ_DISABLED|IRQ_PENDING)) {
shutdown_pirq(irq);
} else if (VALID_EVTCHN(evtchn)) {
unmask_evtchn(evtchn);
pirq_unmask_notify(irq);
}
}
static int find_irq_by_gsi(unsigned gsi)
{
int irq;
for (irq = 0; irq < nr_irqs; irq++) {
struct irq_info *info = info_for_irq(irq);
if (info == NULL || info->type != IRQT_PIRQ)
continue;
if (gsi_from_irq(irq) == gsi)
return irq;
}
return -1;
}
int xen_allocate_pirq(unsigned gsi, int shareable, char *name)
{
return xen_map_pirq_gsi(gsi, gsi, shareable, name);
}
/* xen_map_pirq_gsi might allocate irqs from the top down, as a
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
* consequence don't assume that the irq number returned has a low value
* or can be used as a pirq number unless you know otherwise.
*
* One notable exception is when xen_map_pirq_gsi is called passing an
xen: Find an unbound irq number in reverse order (high to low). In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 14:49:10 +00:00
* hardware gsi as argument, in that case the irq number returned
* matches the gsi number passed as second argument.
*
* Note: We don't assign an event channel until the irq actually started
* up. Return an existing irq if we've already got one for the gsi.
*/
int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name)
{
int irq = 0;
struct physdev_irq irq_op;
spin_lock(&irq_mapping_update_lock);
if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
pirq > nr_pirqs ? "nr_pirqs" :"",
gsi > nr_irqs ? "nr_irqs" : "");
goto out;
}
irq = find_irq_by_gsi(gsi);
if (irq != -1) {
printk(KERN_INFO "xen_map_pirq_gsi: returning irq %d for gsi %u\n",
irq, gsi);
goto out; /* XXX need refcount? */
}
/* If we are a PV guest, we don't have GSIs (no ACPI passed). Therefore
* we are using the !xen_initial_domain() to drop in the function.*/
if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
xen_pv_domain())) {
irq = gsi;
irq_alloc_desc_at(irq, 0);
} else
irq = find_unbound_irq();
set_irq_chip_and_handler_name(irq, &xen_pirq_chip,
handle_level_irq, name);
irq_op.irq = irq;
irq_op.vector = 0;
/* Only the privileged domain can do this. For non-priv, the pcifront
* driver provides a PCI bus that does the call to do exactly
* this in the priv domain. */
if (xen_initial_domain() &&
HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op)) {
irq_free_desc(irq);
irq = -ENOSPC;
goto out;
}
irq_info[irq] = mk_pirq_info(0, pirq, gsi, irq_op.vector);
irq_info[irq].u.pirq.flags |= shareable ? PIRQ_SHAREABLE : 0;
pirq_to_irq[pirq] = irq;
out:
spin_unlock(&irq_mapping_update_lock);
return irq;
}
void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
{
spin_lock(&irq_mapping_update_lock);
*irq = find_unbound_irq();
if (*irq == -1)
goto out;
*pirq = find_unbound_pirq();
if (*pirq == -1)
goto out;
set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
handle_level_irq, name);
irq_info[*irq] = mk_pirq_info(0, *pirq, 0, 0);
pirq_to_irq[*pirq] = *irq;
out:
spin_unlock(&irq_mapping_update_lock);
}
int xen_destroy_irq(int irq)
{
struct irq_desc *desc;
int rc = -ENOENT;
spin_lock(&irq_mapping_update_lock);
desc = irq_to_desc(irq);
if (!desc)
goto out;
irq_info[irq] = mk_unbound_info();
irq_free_desc(irq);
out:
spin_unlock(&irq_mapping_update_lock);
return rc;
}
int xen_vector_from_irq(unsigned irq)
{
return vector_from_irq(irq);
}
int xen_gsi_from_irq(unsigned irq)
{
return gsi_from_irq(irq);
}
int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
spin_lock(&irq_mapping_update_lock);
irq = evtchn_to_irq[evtchn];
if (irq == -1) {
irq = find_unbound_irq();
set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
handle_edge_irq, "event");
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_evtchn_info(evtchn);
}
spin_unlock(&irq_mapping_update_lock);
return irq;
}
EXPORT_SYMBOL_GPL(bind_evtchn_to_irq);
static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
{
struct evtchn_bind_ipi bind_ipi;
int evtchn, irq;
spin_lock(&irq_mapping_update_lock);
irq = per_cpu(ipi_to_irq, cpu)[ipi];
if (irq == -1) {
irq = find_unbound_irq();
if (irq < 0)
goto out;
set_irq_chip_and_handler_name(irq, &xen_percpu_chip,
handle_percpu_irq, "ipi");
bind_ipi.vcpu = cpu;
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi,
&bind_ipi) != 0)
BUG();
evtchn = bind_ipi.port;
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_ipi_info(evtchn, ipi);
per_cpu(ipi_to_irq, cpu)[ipi] = irq;
bind_evtchn_to_cpu(evtchn, cpu);
}
out:
spin_unlock(&irq_mapping_update_lock);
return irq;
}
static int bind_virq_to_irq(unsigned int virq, unsigned int cpu)
{
struct evtchn_bind_virq bind_virq;
int evtchn, irq;
spin_lock(&irq_mapping_update_lock);
irq = per_cpu(virq_to_irq, cpu)[virq];
if (irq == -1) {
bind_virq.virq = virq;
bind_virq.vcpu = cpu;
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq,
&bind_virq) != 0)
BUG();
evtchn = bind_virq.port;
irq = find_unbound_irq();
set_irq_chip_and_handler_name(irq, &xen_percpu_chip,
handle_percpu_irq, "virq");
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_virq_info(evtchn, virq);
per_cpu(virq_to_irq, cpu)[virq] = irq;
bind_evtchn_to_cpu(evtchn, cpu);
}
spin_unlock(&irq_mapping_update_lock);
return irq;
}
static void unbind_from_irq(unsigned int irq)
{
struct evtchn_close close;
int evtchn = evtchn_from_irq(irq);
spin_lock(&irq_mapping_update_lock);
if (VALID_EVTCHN(evtchn)) {
close.port = evtchn;
if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0)
BUG();
switch (type_from_irq(irq)) {
case IRQT_VIRQ:
per_cpu(virq_to_irq, cpu_from_evtchn(evtchn))
[virq_from_irq(irq)] = -1;
break;
case IRQT_IPI:
per_cpu(ipi_to_irq, cpu_from_evtchn(evtchn))
[ipi_from_irq(irq)] = -1;
break;
default:
break;
}
/* Closed ports are implicitly re-bound to VCPU0. */
bind_evtchn_to_cpu(evtchn, 0);
evtchn_to_irq[evtchn] = -1;
}
if (irq_info[irq].type != IRQT_UNBOUND) {
irq_info[irq] = mk_unbound_info();
irq_free_desc(irq);
}
spin_unlock(&irq_mapping_update_lock);
}
int bind_evtchn_to_irqhandler(unsigned int evtchn,
irq_handler_t handler,
unsigned long irqflags,
const char *devname, void *dev_id)
{
unsigned int irq;
int retval;
irq = bind_evtchn_to_irq(evtchn);
retval = request_irq(irq, handler, irqflags, devname, dev_id);
if (retval != 0) {
unbind_from_irq(irq);
return retval;
}
return irq;
}
EXPORT_SYMBOL_GPL(bind_evtchn_to_irqhandler);
int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu,
irq_handler_t handler,
unsigned long irqflags, const char *devname, void *dev_id)
{
unsigned int irq;
int retval;
irq = bind_virq_to_irq(virq, cpu);
retval = request_irq(irq, handler, irqflags, devname, dev_id);
if (retval != 0) {
unbind_from_irq(irq);
return retval;
}
return irq;
}
EXPORT_SYMBOL_GPL(bind_virq_to_irqhandler);
int bind_ipi_to_irqhandler(enum ipi_vector ipi,
unsigned int cpu,
irq_handler_t handler,
unsigned long irqflags,
const char *devname,
void *dev_id)
{
int irq, retval;
irq = bind_ipi_to_irq(ipi, cpu);
if (irq < 0)
return irq;
irqflags |= IRQF_NO_SUSPEND;
retval = request_irq(irq, handler, irqflags, devname, dev_id);
if (retval != 0) {
unbind_from_irq(irq);
return retval;
}
return irq;
}
void unbind_from_irqhandler(unsigned int irq, void *dev_id)
{
free_irq(irq, dev_id);
unbind_from_irq(irq);
}
EXPORT_SYMBOL_GPL(unbind_from_irqhandler);
void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector)
{
int irq = per_cpu(ipi_to_irq, cpu)[vector];
BUG_ON(irq < 0);
notify_remote_via_irq(irq);
}
irqreturn_t xen_debug_interrupt(int irq, void *dev_id)
{
struct shared_info *sh = HYPERVISOR_shared_info;
int cpu = smp_processor_id();
int i;
unsigned long flags;
static DEFINE_SPINLOCK(debug_lock);
spin_lock_irqsave(&debug_lock, flags);
printk("vcpu %d\n ", cpu);
for_each_online_cpu(i) {
struct vcpu_info *v = per_cpu(xen_vcpu, i);
printk("%d: masked=%d pending=%d event_sel %08lx\n ", i,
(get_irq_regs() && i == cpu) ? xen_irqs_disabled(get_irq_regs()) : v->evtchn_upcall_mask,
v->evtchn_upcall_pending,
v->evtchn_pending_sel);
}
printk("pending:\n ");
for(i = ARRAY_SIZE(sh->evtchn_pending)-1; i >= 0; i--)
printk("%08lx%s", sh->evtchn_pending[i],
i % 8 == 0 ? "\n " : " ");
printk("\nmasks:\n ");
for(i = ARRAY_SIZE(sh->evtchn_mask)-1; i >= 0; i--)
printk("%08lx%s", sh->evtchn_mask[i],
i % 8 == 0 ? "\n " : " ");
printk("\nunmasked:\n ");
for(i = ARRAY_SIZE(sh->evtchn_mask)-1; i >= 0; i--)
printk("%08lx%s", sh->evtchn_pending[i] & ~sh->evtchn_mask[i],
i % 8 == 0 ? "\n " : " ");
printk("\npending list:\n");
for(i = 0; i < NR_EVENT_CHANNELS; i++) {
if (sync_test_bit(i, sh->evtchn_pending)) {
printk(" %d: event %d -> irq %d\n",
cpu_from_evtchn(i), i,
evtchn_to_irq[i]);
}
}
spin_unlock_irqrestore(&debug_lock, flags);
return IRQ_HANDLED;
}
static DEFINE_PER_CPU(unsigned, xed_nesting_count);
/*
* Search the CPUs pending events bitmasks. For each one found, map
* the event number to an irq, and feed it into do_IRQ() for
* handling.
*
* Xen uses a two-level bitmap to speed searching. The first level is
* a bitset of words which contain pending event bits. The second
* level is a bitset of pending events themselves.
*/
static void __xen_evtchn_do_upcall(void)
{
int cpu = get_cpu();
struct shared_info *s = HYPERVISOR_shared_info;
struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
unsigned count;
do {
unsigned long pending_words;
vcpu_info->evtchn_upcall_pending = 0;
if (__get_cpu_var(xed_nesting_count)++)
goto out;
#ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */
/* Clear master flag /before/ clearing selector flag. */
wmb();
#endif
pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
while (pending_words != 0) {
unsigned long pending_bits;
int word_idx = __ffs(pending_words);
pending_words &= ~(1UL << word_idx);
while ((pending_bits = active_evtchns(cpu, s, word_idx)) != 0) {
int bit_idx = __ffs(pending_bits);
int port = (word_idx * BITS_PER_LONG) + bit_idx;
int irq = evtchn_to_irq[port];
struct irq_desc *desc;
if (irq != -1) {
desc = irq_to_desc(irq);
if (desc)
generic_handle_irq_desc(irq, desc);
}
}
}
BUG_ON(!irqs_disabled());
count = __get_cpu_var(xed_nesting_count);
__get_cpu_var(xed_nesting_count) = 0;
} while (count != 1 || vcpu_info->evtchn_upcall_pending);
out:
put_cpu();
}
void xen_evtchn_do_upcall(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
exit_idle();
irq_enter();
__xen_evtchn_do_upcall();
irq_exit();
set_irq_regs(old_regs);
}
void xen_hvm_evtchn_do_upcall(void)
{
__xen_evtchn_do_upcall();
}
EXPORT_SYMBOL_GPL(xen_hvm_evtchn_do_upcall);
/* Rebind a new event channel to an existing irq. */
void rebind_evtchn_irq(int evtchn, int irq)
{
struct irq_info *info = info_for_irq(irq);
/* Make sure the irq is masked, since the new event channel
will also be masked. */
disable_irq(irq);
spin_lock(&irq_mapping_update_lock);
/* After resume the irq<->evtchn mappings are all cleared out */
BUG_ON(evtchn_to_irq[evtchn] != -1);
/* Expect irq to have been bound before,
so there should be a proper type */
BUG_ON(info->type == IRQT_UNBOUND);
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_evtchn_info(evtchn);
spin_unlock(&irq_mapping_update_lock);
/* new event channels are always bound to cpu 0 */
irq_set_affinity(irq, cpumask_of(0));
/* Unmask the event channel. */
enable_irq(irq);
}
/* Rebind an evtchn so that it gets delivered to a specific cpu */
static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
{
struct evtchn_bind_vcpu bind_vcpu;
int evtchn = evtchn_from_irq(irq);
/* events delivered via platform PCI interrupts are always
* routed to vcpu 0 */
if (!VALID_EVTCHN(evtchn) ||
(xen_hvm_domain() && !xen_have_vector_callback))
return -1;
/* Send future instances of this interrupt to other vcpu. */
bind_vcpu.port = evtchn;
bind_vcpu.vcpu = tcpu;
/*
* If this fails, it usually just indicates that we're dealing with a
* virq or IPI channel, which don't actually need to be rebound. Ignore
* it, but don't do the xenlinux-level rebind in that case.
*/
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
bind_evtchn_to_cpu(evtchn, tcpu);
return 0;
}
static int set_affinity_irq(unsigned irq, const struct cpumask *dest)
{
unsigned tcpu = cpumask_first(dest);
return rebind_irq_to_cpu(irq, tcpu);
}
int resend_irq_on_evtchn(unsigned int irq)
{
int masked, evtchn = evtchn_from_irq(irq);
struct shared_info *s = HYPERVISOR_shared_info;
if (!VALID_EVTCHN(evtchn))
return 1;
masked = sync_test_and_set_bit(evtchn, s->evtchn_mask);
sync_set_bit(evtchn, s->evtchn_pending);
if (!masked)
unmask_evtchn(evtchn);
return 1;
}
static void enable_dynirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn))
unmask_evtchn(evtchn);
}
static void disable_dynirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn))
mask_evtchn(evtchn);
}
static void ack_dynirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
move_native_irq(irq);
if (VALID_EVTCHN(evtchn))
clear_evtchn(evtchn);
}
static int retrigger_dynirq(unsigned int irq)
{
int evtchn = evtchn_from_irq(irq);
struct shared_info *sh = HYPERVISOR_shared_info;
int ret = 0;
if (VALID_EVTCHN(evtchn)) {
int masked;
masked = sync_test_and_set_bit(evtchn, sh->evtchn_mask);
sync_set_bit(evtchn, sh->evtchn_pending);
if (!masked)
unmask_evtchn(evtchn);
ret = 1;
}
return ret;
}
static void restore_cpu_virqs(unsigned int cpu)
{
struct evtchn_bind_virq bind_virq;
int virq, irq, evtchn;
for (virq = 0; virq < NR_VIRQS; virq++) {
if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1)
continue;
BUG_ON(virq_from_irq(irq) != virq);
/* Get a new binding from Xen. */
bind_virq.virq = virq;
bind_virq.vcpu = cpu;
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq,
&bind_virq) != 0)
BUG();
evtchn = bind_virq.port;
/* Record the new mapping. */
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_virq_info(evtchn, virq);
bind_evtchn_to_cpu(evtchn, cpu);
/* Ready for use. */
unmask_evtchn(evtchn);
}
}
static void restore_cpu_ipis(unsigned int cpu)
{
struct evtchn_bind_ipi bind_ipi;
int ipi, irq, evtchn;
for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) {
if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1)
continue;
BUG_ON(ipi_from_irq(irq) != ipi);
/* Get a new binding from Xen. */
bind_ipi.vcpu = cpu;
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi,
&bind_ipi) != 0)
BUG();
evtchn = bind_ipi.port;
/* Record the new mapping. */
evtchn_to_irq[evtchn] = irq;
irq_info[irq] = mk_ipi_info(evtchn, ipi);
bind_evtchn_to_cpu(evtchn, cpu);
/* Ready for use. */
unmask_evtchn(evtchn);
}
}
xen: implement Xen-specific spinlocks The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-07 19:07:53 +00:00
/* Clear an irq's pending state, in preparation for polling on it */
void xen_clear_irq_pending(int irq)
{
int evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn))
clear_evtchn(evtchn);
}
EXPORT_SYMBOL(xen_clear_irq_pending);
void xen_set_irq_pending(int irq)
{
int evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn))
set_evtchn(evtchn);
}
bool xen_test_irq_pending(int irq)
{
int evtchn = evtchn_from_irq(irq);
bool ret = false;
if (VALID_EVTCHN(evtchn))
ret = test_evtchn(evtchn);
return ret;
}
/* Poll waiting for an irq to become pending with timeout. In the usual case,
* the irq will be disabled so it won't deliver an interrupt. */
void xen_poll_irq_timeout(int irq, u64 timeout)
xen: implement Xen-specific spinlocks The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-07 19:07:53 +00:00
{
evtchn_port_t evtchn = evtchn_from_irq(irq);
if (VALID_EVTCHN(evtchn)) {
struct sched_poll poll;
poll.nr_ports = 1;
poll.timeout = timeout;
set_xen_guest_handle(poll.ports, &evtchn);
xen: implement Xen-specific spinlocks The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-07 19:07:53 +00:00
if (HYPERVISOR_sched_op(SCHEDOP_poll, &poll) != 0)
BUG();
}
}
EXPORT_SYMBOL(xen_poll_irq_timeout);
/* Poll waiting for an irq to become pending. In the usual case, the
* irq will be disabled so it won't deliver an interrupt. */
void xen_poll_irq(int irq)
{
xen_poll_irq_timeout(irq, 0 /* no timeout */);
}
xen: implement Xen-specific spinlocks The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-07 19:07:53 +00:00
void xen_irq_resume(void)
{
unsigned int cpu, irq, evtchn;
init_evtchn_cpu_bindings();
/* New event-channel space is not 'live' yet. */
for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++)
mask_evtchn(evtchn);
/* No IRQ <-> event-channel mappings. */
for (irq = 0; irq < nr_irqs; irq++)
irq_info[irq].evtchn = 0; /* zap event-channel binding */
for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++)
evtchn_to_irq[evtchn] = -1;
for_each_possible_cpu(cpu) {
restore_cpu_virqs(cpu);
restore_cpu_ipis(cpu);
}
}
static struct irq_chip xen_dynamic_chip __read_mostly = {
.name = "xen-dyn",
.disable = disable_dynirq,
.mask = disable_dynirq,
.unmask = enable_dynirq,
.ack = ack_dynirq,
.set_affinity = set_affinity_irq,
.retrigger = retrigger_dynirq,
};
static struct irq_chip xen_pirq_chip __read_mostly = {
.name = "xen-pirq",
.startup = startup_pirq,
.shutdown = shutdown_pirq,
.enable = enable_pirq,
.unmask = enable_pirq,
.disable = disable_pirq,
.mask = disable_pirq,
.ack = ack_pirq,
.end = end_pirq,
.set_affinity = set_affinity_irq,
.retrigger = retrigger_dynirq,
};
static struct irq_chip xen_percpu_chip __read_mostly = {
.name = "xen-percpu",
.disable = disable_dynirq,
.mask = disable_dynirq,
.unmask = enable_dynirq,
.ack = ack_dynirq,
};
int xen_set_callback_via(uint64_t via)
{
struct xen_hvm_param a;
a.domid = DOMID_SELF;
a.index = HVM_PARAM_CALLBACK_IRQ;
a.value = via;
return HYPERVISOR_hvm_op(HVMOP_set_param, &a);
}
EXPORT_SYMBOL_GPL(xen_set_callback_via);
#ifdef CONFIG_XEN_PVHVM
/* Vector callbacks are better than PCI interrupts to receive event
* channel notifications because we can receive vector callbacks on any
* vcpu and we don't need PCI support or APIC interactions. */
void xen_callback_vector(void)
{
int rc;
uint64_t callback_via;
if (xen_have_vector_callback) {
callback_via = HVM_CALLBACK_VECTOR(XEN_HVM_EVTCHN_CALLBACK);
rc = xen_set_callback_via(callback_via);
if (rc) {
printk(KERN_ERR "Request for Xen HVM callback vector"
" failed.\n");
xen_have_vector_callback = 0;
return;
}
printk(KERN_INFO "Xen HVM callback vector for event delivery is "
"enabled\n");
/* in the restore case the vector has already been allocated */
if (!test_bit(XEN_HVM_EVTCHN_CALLBACK, used_vectors))
alloc_intr_gate(XEN_HVM_EVTCHN_CALLBACK, xen_hvm_callback_vector);
}
}
#else
void xen_callback_vector(void) {}
#endif
void __init xen_init_IRQ(void)
{
int i, rc;
struct physdev_nr_pirqs op_nr_pirqs;
cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
GFP_KERNEL);
irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
if (rc < 0) {
nr_pirqs = nr_irqs;
if (rc != -ENOSYS)
printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
} else {
if (xen_pv_domain() && !xen_initial_domain())
nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
else
nr_pirqs = op_nr_pirqs.nr_pirqs;
}
pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
for (i = 0; i < nr_pirqs; i++)
pirq_to_irq[i] = -1;
evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
GFP_KERNEL);
for (i = 0; i < NR_EVENT_CHANNELS; i++)
evtchn_to_irq[i] = -1;
init_evtchn_cpu_bindings();
/* No event channels are 'live' right now. */
for (i = 0; i < NR_EVENT_CHANNELS; i++)
mask_evtchn(i);
if (xen_hvm_domain()) {
xen_callback_vector();
native_init_IRQ();
/* pci_xen_hvm_init must be called after native_init_IRQ so that
* __acpi_register_gsi can point at the right function */
pci_xen_hvm_init();
} else {
irq_ctx_init(smp_processor_id());
}
}