leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
623105dc97
linux/sound/soc/codecs/tlv320dac33.c

1651 lines
44 KiB
C
Raw Normal View History

ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/*
* ALSA SoC Texas Instruments TLV320DAC33 codec driver
*
ASoC: tlv320dac33: Update e-mail address Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-05-03 15:11:36 +00:00
* Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
*
* Copyright: (C) 2009 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
#include <linux/regulator/consumer.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/tlv320dac33-plat.h>
#include "tlv320dac33.h"
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
/*
* The internal FIFO is 24576 bytes long
* It can be configured to hold 16bit or 24bit samples
* In 16bit configuration the FIFO can hold 6144 stereo samples
* In 24bit configuration the FIFO can hold 4096 stereo samples
*/
#define DAC33_FIFO_SIZE_16BIT 6144
#define DAC33_FIFO_SIZE_24BIT 4096
#define DAC33_MODE7_MARGIN 10 /* Safety margin for FIFO in Mode7 */
ASoC: tlv320dac33: Change magic numbers used in Mode7 Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:59 +00:00
ASoC: tlv320dac33: Calculate the interface speed during bursts When the DAC33 FIFO is in use the dai interface is running in much higher speed than the sampling frequency. Calculate the rate based on the internal base frequency and the bclk divider. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:00 +00:00
#define BURST_BASEFREQ_HZ 49152000
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
#define SAMPLES_TO_US(rate, samples) \
ASoC: tlv320dac33: Add guarding parentheses to macros Put parentheses around macro argument uses. This avoids pitfalls for the programmer, where the argument expansion does not give the expected result, for example: SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - DAC33_MODE7_MARGIN + 1); Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-29 04:09:57 +00:00
(1000000000 / (((rate) * 1000) / (samples)))
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
#define US_TO_SAMPLES(rate, us) \
ASoC: tlv320dac33: Add guarding parentheses to macros Put parentheses around macro argument uses. This avoids pitfalls for the programmer, where the argument expansion does not give the expected result, for example: SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - DAC33_MODE7_MARGIN + 1); Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-29 04:09:57 +00:00
((rate) / (1000000 / ((us) < 1000000 ? (us) : 1000000)))
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
ASoC: tlv320dac33: Add guarding parentheses to macros Put parentheses around macro argument uses. This avoids pitfalls for the programmer, where the argument expansion does not give the expected result, for example: SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - DAC33_MODE7_MARGIN + 1); Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-29 04:09:57 +00:00
(((samples)*5000) / (((burstrate)*5000) / ((burstrate) - (playrate))))
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
static void dac33_calculate_times(struct snd_pcm_substream *substream);
static int dac33_prepare_chip(struct snd_pcm_substream *substream);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
enum dac33_state {
DAC33_IDLE = 0,
DAC33_PREFILL,
DAC33_PLAYBACK,
DAC33_FLUSH,
};
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
enum dac33_fifo_modes {
DAC33_FIFO_BYPASS = 0,
DAC33_FIFO_MODE1,
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
DAC33_FIFO_MODE7,
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
DAC33_FIFO_LAST_MODE,
};
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
#define DAC33_NUM_SUPPLIES 3
static const char *dac33_supply_names[DAC33_NUM_SUPPLIES] = {
"AVDD",
"DVDD",
"IOVDD",
};
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct tlv320dac33_priv {
struct mutex mutex;
struct workqueue_struct *dac33_wq;
struct work_struct work;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec;
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
struct regulator_bulk_data supplies[DAC33_NUM_SUPPLIES];
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
struct snd_pcm_substream *substream;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int power_gpio;
int chip_power;
int irq;
unsigned int refclk;
unsigned int alarm_threshold; /* set to be half of LATENCY_TIME_MS */
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
unsigned int fifo_size; /* Size of the FIFO in samples */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int nsample; /* burst read amount from host */
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
int mode1_latency; /* latency caused by the i2c writes in
* us */
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
u8 burst_bclkdiv; /* BCLK divider value in burst mode */
ASoC: tlv320dac33: Calculate the interface speed during bursts When the DAC33 FIFO is in use the dai interface is running in much higher speed than the sampling frequency. Calculate the rate based on the internal base frequency and the bclk divider. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:00 +00:00
unsigned int burst_rate; /* Interface speed in Burst modes */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
int keep_bclk; /* Keep the BCLK continuously running
* in FIFO modes */
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
spinlock_t lock;
unsigned long long t_stamp1; /* Time stamp for FIFO modes to */
unsigned long long t_stamp2; /* calculate the FIFO caused delay */
unsigned int mode1_us_burst; /* Time to burst read n number of
* samples */
unsigned int mode7_us_to_lthr; /* Time to reach lthr from uthr */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
unsigned int uthr;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
enum dac33_state state;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
enum snd_soc_control_type control_type;
void *control_data;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
static const u8 dac33_reg[DAC33_CACHEREGNUM] = {
0x00, 0x00, 0x00, 0x00, /* 0x00 - 0x03 */
0x00, 0x00, 0x00, 0x00, /* 0x04 - 0x07 */
0x00, 0x00, 0x00, 0x00, /* 0x08 - 0x0b */
0x00, 0x00, 0x00, 0x00, /* 0x0c - 0x0f */
0x00, 0x00, 0x00, 0x00, /* 0x10 - 0x13 */
0x00, 0x00, 0x00, 0x00, /* 0x14 - 0x17 */
0x00, 0x00, 0x00, 0x00, /* 0x18 - 0x1b */
0x00, 0x00, 0x00, 0x00, /* 0x1c - 0x1f */
0x00, 0x00, 0x00, 0x00, /* 0x20 - 0x23 */
0x00, 0x00, 0x00, 0x00, /* 0x24 - 0x27 */
0x00, 0x00, 0x00, 0x00, /* 0x28 - 0x2b */
0x00, 0x00, 0x00, 0x80, /* 0x2c - 0x2f */
0x80, 0x00, 0x00, 0x00, /* 0x30 - 0x33 */
0x00, 0x00, 0x00, 0x00, /* 0x34 - 0x37 */
0x00, 0x00, /* 0x38 - 0x39 */
/* Registers 0x3a - 0x3f are reserved */
0x00, 0x00, /* 0x3a - 0x3b */
0x00, 0x00, 0x00, 0x00, /* 0x3c - 0x3f */
0x00, 0x00, 0x00, 0x00, /* 0x40 - 0x43 */
0x00, 0x80, /* 0x44 - 0x45 */
/* Registers 0x46 - 0x47 are reserved */
0x80, 0x80, /* 0x46 - 0x47 */
0x80, 0x00, 0x00, /* 0x48 - 0x4a */
/* Registers 0x4b - 0x7c are reserved */
0x00, /* 0x4b */
0x00, 0x00, 0x00, 0x00, /* 0x4c - 0x4f */
0x00, 0x00, 0x00, 0x00, /* 0x50 - 0x53 */
0x00, 0x00, 0x00, 0x00, /* 0x54 - 0x57 */
0x00, 0x00, 0x00, 0x00, /* 0x58 - 0x5b */
0x00, 0x00, 0x00, 0x00, /* 0x5c - 0x5f */
0x00, 0x00, 0x00, 0x00, /* 0x60 - 0x63 */
0x00, 0x00, 0x00, 0x00, /* 0x64 - 0x67 */
0x00, 0x00, 0x00, 0x00, /* 0x68 - 0x6b */
0x00, 0x00, 0x00, 0x00, /* 0x6c - 0x6f */
0x00, 0x00, 0x00, 0x00, /* 0x70 - 0x73 */
0x00, 0x00, 0x00, 0x00, /* 0x74 - 0x77 */
0x00, 0x00, 0x00, 0x00, /* 0x78 - 0x7b */
0x00, /* 0x7c */
0xda, 0x33, 0x03, /* 0x7d - 0x7f */
};
/* Register read and write */
static inline unsigned int dac33_read_reg_cache(struct snd_soc_codec *codec,
unsigned reg)
{
u8 *cache = codec->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return 0;
return cache[reg];
}
static inline void dac33_write_reg_cache(struct snd_soc_codec *codec,
u8 reg, u8 value)
{
u8 *cache = codec->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return;
cache[reg] = value;
}
static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
u8 *value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
int val, ret = 0;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
*value = reg & 0xff;
/* If powered off, return the cached value */
if (dac33->chip_power) {
val = i2c_smbus_read_byte_data(codec->control_data, value[0]);
if (val < 0) {
dev_err(codec->dev, "Read failed (%d)\n", val);
value[0] = dac33_read_reg_cache(codec, reg);
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
ret = val;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
} else {
value[0] = val;
dac33_write_reg_cache(codec, reg, val);
}
} else {
value[0] = dac33_read_reg_cache(codec, reg);
}
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 data[2];
int ret = 0;
/*
* data is
* D15..D8 dac33 register offset
* D7...D0 register data
*/
data[0] = reg & 0xff;
data[1] = value & 0xff;
dac33_write_reg_cache(codec, data[0], data[1]);
if (dac33->chip_power) {
ret = codec->hw_write(codec->control_data, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
ret = 0;
}
return ret;
}
static int dac33_write_locked(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret;
mutex_lock(&dac33->mutex);
ret = dac33_write(codec, reg, value);
mutex_unlock(&dac33->mutex);
return ret;
}
#define DAC33_I2C_ADDR_AUTOINC 0x80
static int dac33_write16(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 data[3];
int ret = 0;
/*
* data is
* D23..D16 dac33 register offset
* D15..D8 register data MSB
* D7...D0 register data LSB
*/
data[0] = reg & 0xff;
data[1] = (value >> 8) & 0xff;
data[2] = value & 0xff;
dac33_write_reg_cache(codec, data[0], data[1]);
dac33_write_reg_cache(codec, data[0] + 1, data[2]);
if (dac33->chip_power) {
/* We need to set autoincrement mode for 16 bit writes */
data[0] |= DAC33_I2C_ADDR_AUTOINC;
ret = codec->hw_write(codec->control_data, data, 3);
if (ret != 3)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
ret = 0;
}
return ret;
}
ASoC: tlv320dac33: Optimize power up, and restore On power up we only need to initialize the codec, and restore only registers, which are not in either in DAPM nor in the playback start sequence. These are mostly gain related registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:33 +00:00
static void dac33_init_chip(struct snd_soc_codec *codec)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Optimize power up, and restore On power up we only need to initialize the codec, and restore only registers, which are not in either in DAPM nor in the playback start sequence. These are mostly gain related registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:33 +00:00
if (unlikely(!dac33->chip_power))
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return;
ASoC: tlv320dac33: Optimize power up, and restore On power up we only need to initialize the codec, and restore only registers, which are not in either in DAPM nor in the playback start sequence. These are mostly gain related registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:33 +00:00
/* A : DAC sample rate Fsref/1.5 */
dac33_write(codec, DAC33_DAC_CTRL_A, DAC33_DACRATE(0));
/* B : DAC src=normal, not muted */
dac33_write(codec, DAC33_DAC_CTRL_B, DAC33_DACSRCR_RIGHT |
DAC33_DACSRCL_LEFT);
/* C : (defaults) */
dac33_write(codec, DAC33_DAC_CTRL_C, 0x00);
/* 73 : volume soft stepping control,
clock source = internal osc (?) */
dac33_write(codec, DAC33_ANA_VOL_SOFT_STEP_CTRL, DAC33_VOLCLKEN);
/* Restore only selected registers (gains mostly) */
dac33_write(codec, DAC33_LDAC_DIG_VOL_CTRL,
dac33_read_reg_cache(codec, DAC33_LDAC_DIG_VOL_CTRL));
dac33_write(codec, DAC33_RDAC_DIG_VOL_CTRL,
dac33_read_reg_cache(codec, DAC33_RDAC_DIG_VOL_CTRL));
dac33_write(codec, DAC33_LINEL_TO_LLO_VOL,
dac33_read_reg_cache(codec, DAC33_LINEL_TO_LLO_VOL));
dac33_write(codec, DAC33_LINER_TO_RLO_VOL,
dac33_read_reg_cache(codec, DAC33_LINER_TO_RLO_VOL));
ASoC: tlv320dac33: Add DAPM selection for LOM invert The L/R LOM line can be invertined side of the corresponding DAC, or inverted from the corresponding LOP. Add control for user space to select the source of the LOM inversion. When only the analog bypass is enabled, and the LOM is inverted from DAC output, we need to power the corresponding DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10 13:39:49 +00:00
dac33_write(codec, DAC33_OUT_AMP_CTRL,
dac33_read_reg_cache(codec, DAC33_OUT_AMP_CTRL));
ASoC: tlv320dac33: Restore L/R DAC power control register Register 0x40, 0x41 need to be restored after power up, since it contains gain related fields, which affects playback volume. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-24 06:58:05 +00:00
dac33_write(codec, DAC33_LDAC_PWR_CTRL,
dac33_read_reg_cache(codec, DAC33_LDAC_PWR_CTRL));
dac33_write(codec, DAC33_RDAC_PWR_CTRL,
dac33_read_reg_cache(codec, DAC33_RDAC_PWR_CTRL));
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
static inline int dac33_read_id(struct snd_soc_codec *codec)
ASoC: tlv320dac33: Revised module loading, and DAC33 ID read Optimize the way how tlv320dac33 is powered uppon module and soc initialization. Also read the DAC33 ID registers, and update the reg_cache to reflect it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:34 +00:00
{
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
int i, ret = 0;
ASoC: tlv320dac33: Revised module loading, and DAC33 ID read Optimize the way how tlv320dac33 is powered uppon module and soc initialization. Also read the DAC33 ID registers, and update the reg_cache to reflect it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:34 +00:00
u8 reg;
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
for (i = 0; i < 3; i++) {
ret = dac33_read(codec, DAC33_DEVICE_ID_MSB + i, &reg);
if (ret < 0)
break;
}
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
static inline void dac33_soft_power(struct snd_soc_codec *codec, int power)
{
u8 reg;
reg = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
if (power)
reg |= DAC33_PDNALLB;
else
ASoC: tlv320dac33: Start/stop sequence change To avoid race condition especially in FIFO modes the sequence for enabling and disabling the codec need to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:21 +00:00
reg &= ~(DAC33_PDNALLB | DAC33_OSCPDNB |
DAC33_DACRPDNB | DAC33_DACLPDNB);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_PWR_CTRL, reg);
}
ASoC: tlv320dac33: Power down digital parts, when not needed If the following scenario has been followed: 1. Enable analog bypass amixer sset 'Analog Left Bypass' on amixer sset 'Analog Right Bypass' on 2. Start playback aplay -fdat -d3 /dev/zero After the playback stopped (3 sec), and the soc timeout (5 sec), the digital parts of the codec will remain powered up. This means that the DAI clocks are continue to run, the oscillator remain operational, etc. Use the SND_SOC_DAPM_POST_PMD widget to get notification about the stopped stream, and power down the digital part of the codec. If the analog bypass is enabled, than the codec will remain in BIAS_ON level, and things will work correctly. In case, if the bypass is disabled, than the codec will fall to BIAS_STANDBY than to BIAS_OFF level, as it used to. The digital part of DAC33 is initialized at every stream start (DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec) will have working DAI. When the codec is coming out from BIAS_OFF, the full power-up sequence followed by the same DAPM_PRE widget event will power up the digital part. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10 11:26:31 +00:00
static inline void dac33_disable_digital(struct snd_soc_codec *codec)
{
u8 reg;
/* Stop the DAI clock */
reg = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
reg &= ~DAC33_BCLKON;
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, reg);
/* Power down the Oscillator, and DACs */
reg = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
reg &= ~(DAC33_OSCPDNB | DAC33_DACRPDNB | DAC33_DACLPDNB);
dac33_write(codec, DAC33_PWR_CTRL, reg);
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
static int dac33_hard_power(struct snd_soc_codec *codec, int power)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
int ret = 0;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
mutex_lock(&dac33->mutex);
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
/* Safety check */
if (unlikely(power == dac33->chip_power)) {
ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function Since the cases when the same power state would be set again handled gracefully, we do not need to use dev_warn. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-17 11:21:45 +00:00
dev_dbg(codec->dev, "Trying to set the same power state: %s\n",
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
power ? "ON" : "OFF");
goto exit;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (power) {
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev,
"Failed to enable supplies: %d\n", ret);
goto exit;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
if (dac33->power_gpio >= 0)
gpio_set_value(dac33->power_gpio, 1);
dac33->chip_power = 1;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
} else {
dac33_soft_power(codec, 0);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
if (dac33->power_gpio >= 0)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
gpio_set_value(dac33->power_gpio, 0);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = regulator_bulk_disable(ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev,
"Failed to disable supplies: %d\n", ret);
goto exit;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
dac33->chip_power = 0;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
exit:
mutex_unlock(&dac33->mutex);
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Power down digital parts, when not needed If the following scenario has been followed: 1. Enable analog bypass amixer sset 'Analog Left Bypass' on amixer sset 'Analog Right Bypass' on 2. Start playback aplay -fdat -d3 /dev/zero After the playback stopped (3 sec), and the soc timeout (5 sec), the digital parts of the codec will remain powered up. This means that the DAI clocks are continue to run, the oscillator remain operational, etc. Use the SND_SOC_DAPM_POST_PMD widget to get notification about the stopped stream, and power down the digital part of the codec. If the analog bypass is enabled, than the codec will remain in BIAS_ON level, and things will work correctly. In case, if the bypass is disabled, than the codec will fall to BIAS_STANDBY than to BIAS_OFF level, as it used to. The digital part of DAC33 is initialized at every stream start (DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec) will have working DAI. When the codec is coming out from BIAS_OFF, the full power-up sequence followed by the same DAPM_PRE widget event will power up the digital part. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10 11:26:31 +00:00
static int dac33_playback_event(struct snd_soc_dapm_widget *w,
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
struct snd_kcontrol *kcontrol, int event)
{
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(w->codec);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
if (likely(dac33->substream)) {
dac33_calculate_times(dac33->substream);
dac33_prepare_chip(dac33->substream);
}
break;
ASoC: tlv320dac33: Power down digital parts, when not needed If the following scenario has been followed: 1. Enable analog bypass amixer sset 'Analog Left Bypass' on amixer sset 'Analog Right Bypass' on 2. Start playback aplay -fdat -d3 /dev/zero After the playback stopped (3 sec), and the soc timeout (5 sec), the digital parts of the codec will remain powered up. This means that the DAI clocks are continue to run, the oscillator remain operational, etc. Use the SND_SOC_DAPM_POST_PMD widget to get notification about the stopped stream, and power down the digital part of the codec. If the analog bypass is enabled, than the codec will remain in BIAS_ON level, and things will work correctly. In case, if the bypass is disabled, than the codec will fall to BIAS_STANDBY than to BIAS_OFF level, as it used to. The digital part of DAC33 is initialized at every stream start (DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec) will have working DAI. When the codec is coming out from BIAS_OFF, the full power-up sequence followed by the same DAPM_PRE widget event will power up the digital part. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10 11:26:31 +00:00
case SND_SOC_DAPM_POST_PMD:
dac33_disable_digital(w->codec);
break;
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
}
return 0;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
ucontrol->value.integer.value[0] = dac33->fifo_mode;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
static int dac33_set_fifo_mode(struct snd_kcontrol *kcontrol,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode == ucontrol->value.integer.value[0])
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
/* Do not allow changes while stream is running*/
if (codec->active)
return -EPERM;
if (ucontrol->value.integer.value[0] < 0 ||
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
ucontrol->value.integer.value[0] >= DAC33_FIFO_LAST_MODE)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ret = -EINVAL;
else
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
dac33->fifo_mode = ucontrol->value.integer.value[0];
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return ret;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
/* Codec operation modes */
static const char *dac33_fifo_mode_texts[] = {
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
"Bypass", "Mode 1", "Mode 7"
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
};
static const struct soc_enum dac33_fifo_mode_enum =
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(dac33_fifo_mode_texts),
dac33_fifo_mode_texts);
ASoC: tlv320dac33: Control for line output gain New control to select the line output gain. This gain control affects the linein-to-lineout and dac-to-loneout gain differently. Use enum type to select the desired gain combination. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13 08:56:28 +00:00
/* L/R Line Output Gain */
static const char *lr_lineout_gain_texts[] = {
"Line -12dB DAC 0dB", "Line -6dB DAC 6dB",
"Line 0dB DAC 12dB", "Line 6dB DAC 18dB",
};
static const struct soc_enum l_lineout_gain_enum =
SOC_ENUM_SINGLE(DAC33_LDAC_PWR_CTRL, 0,
ARRAY_SIZE(lr_lineout_gain_texts),
lr_lineout_gain_texts);
static const struct soc_enum r_lineout_gain_enum =
SOC_ENUM_SINGLE(DAC33_RDAC_PWR_CTRL, 0,
ARRAY_SIZE(lr_lineout_gain_texts),
lr_lineout_gain_texts);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/*
* DACL/R digital volume control:
* from 0 dB to -63.5 in 0.5 dB steps
* Need to be inverted later on:
* 0x00 == 0 dB
* 0x7f == -63.5 dB
*/
static DECLARE_TLV_DB_SCALE(dac_digivol_tlv, -6350, 50, 0);
static const struct snd_kcontrol_new dac33_snd_controls[] = {
SOC_DOUBLE_R_TLV("DAC Digital Playback Volume",
DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL,
0, 0x7f, 1, dac_digivol_tlv),
SOC_DOUBLE_R("DAC Digital Playback Switch",
DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL, 7, 1, 1),
SOC_DOUBLE_R("Line to Line Out Volume",
DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
ASoC: tlv320dac33: Control for line output gain New control to select the line output gain. This gain control affects the linein-to-lineout and dac-to-loneout gain differently. Use enum type to select the desired gain combination. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13 08:56:28 +00:00
SOC_ENUM("Left Line Output Gain", l_lineout_gain_enum),
SOC_ENUM("Right Line Output Gain", r_lineout_gain_enum),
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
static const struct snd_kcontrol_new dac33_mode_snd_controls[] = {
SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
dac33_get_fifo_mode, dac33_set_fifo_mode),
};
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Analog bypass */
static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
static const struct snd_kcontrol_new dac33_dapm_abypassr_control =
SOC_DAPM_SINGLE("Switch", DAC33_LINER_TO_RLO_VOL, 7, 1, 1);
ASoC: tlv320dac33: Add DAPM selection for LOM invert The L/R LOM line can be invertined side of the corresponding DAC, or inverted from the corresponding LOP. Add control for user space to select the source of the LOM inversion. When only the analog bypass is enabled, and the LOM is inverted from DAC output, we need to power the corresponding DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10 13:39:49 +00:00
/* LOP L/R invert selection */
static const char *dac33_lr_lom_texts[] = {"DAC", "LOP"};
static const struct soc_enum dac33_left_lom_enum =
SOC_ENUM_SINGLE(DAC33_OUT_AMP_CTRL, 3,
ARRAY_SIZE(dac33_lr_lom_texts),
dac33_lr_lom_texts);
static const struct snd_kcontrol_new dac33_dapm_left_lom_control =
SOC_DAPM_ENUM("Route", dac33_left_lom_enum);
static const struct soc_enum dac33_right_lom_enum =
SOC_ENUM_SINGLE(DAC33_OUT_AMP_CTRL, 2,
ARRAY_SIZE(dac33_lr_lom_texts),
dac33_lr_lom_texts);
static const struct snd_kcontrol_new dac33_dapm_right_lom_control =
SOC_DAPM_ENUM("Route", dac33_right_lom_enum);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static const struct snd_soc_dapm_widget dac33_dapm_widgets[] = {
SND_SOC_DAPM_OUTPUT("LEFT_LO"),
SND_SOC_DAPM_OUTPUT("RIGHT_LO"),
SND_SOC_DAPM_INPUT("LINEL"),
SND_SOC_DAPM_INPUT("LINER"),
ASoC: tlv320dac33: Move DAC LR power on to a supply widget The power for the DACs need to be enabled, even when only the analog bypass is in use with the codec, otherwise the audio is going to be distorted. Make sure that the DACs are powered all the time, when there is audio activity. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:33 +00:00
SND_SOC_DAPM_DAC("DACL", "Left Playback", SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_DAC("DACR", "Right Playback", SND_SOC_NOPM, 0, 0),
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Analog bypass */
SND_SOC_DAPM_SWITCH("Analog Left Bypass", SND_SOC_NOPM, 0, 0,
&dac33_dapm_abypassl_control),
SND_SOC_DAPM_SWITCH("Analog Right Bypass", SND_SOC_NOPM, 0, 0,
&dac33_dapm_abypassr_control),
ASoC: tlv320dac33: Add DAPM selection for LOM invert The L/R LOM line can be invertined side of the corresponding DAC, or inverted from the corresponding LOP. Add control for user space to select the source of the LOM inversion. When only the analog bypass is enabled, and the LOM is inverted from DAC output, we need to power the corresponding DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10 13:39:49 +00:00
SND_SOC_DAPM_MUX("Left LOM Inverted From", SND_SOC_NOPM, 0, 0,
&dac33_dapm_left_lom_control),
SND_SOC_DAPM_MUX("Right LOM Inverted From", SND_SOC_NOPM, 0, 0,
&dac33_dapm_right_lom_control),
/*
* For DAPM path, when only the anlog bypass path is enabled, and the
* LOP inverted from the corresponding DAC side.
* This is needed, so we can attach the DAC power supply in this case.
*/
SND_SOC_DAPM_PGA("Left Bypass PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Bypass PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
ASoC: tlv320dac33: Rename outpup amplifier widget Use better name for the widget, and remove the 'Power' from it's name. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:32 +00:00
SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Left Amplifier",
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
DAC33_OUT_AMP_PWR_CTRL, 6, 3, 3, 0),
ASoC: tlv320dac33: Rename outpup amplifier widget Use better name for the widget, and remove the 'Power' from it's name. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:32 +00:00
SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Right Amplifier",
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
DAC33_OUT_AMP_PWR_CTRL, 4, 3, 3, 0),
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
ASoC: tlv320dac33: Move DAC LR power on to a supply widget The power for the DACs need to be enabled, even when only the analog bypass is in use with the codec, otherwise the audio is going to be distorted. Make sure that the DACs are powered all the time, when there is audio activity. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:33 +00:00
SND_SOC_DAPM_SUPPLY("Left DAC Power",
DAC33_LDAC_PWR_CTRL, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Right DAC Power",
DAC33_RDAC_PWR_CTRL, 2, 0, NULL, 0),
ASoC: tlv320dac33: Move codec power up to DAPM Move the codec power on (in reg 0x01, bit 4) from set_bias_level:SND_SOC_BIAS_ON to a DAPM supply. In this way we can be sure, that all the things within the codec is powered before the external amp is going to be enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-24 07:11:49 +00:00
SND_SOC_DAPM_SUPPLY("Codec Power",
DAC33_PWR_CTRL, 4, 0, NULL, 0),
ASoC: tlv320dac33: Power down digital parts, when not needed If the following scenario has been followed: 1. Enable analog bypass amixer sset 'Analog Left Bypass' on amixer sset 'Analog Right Bypass' on 2. Start playback aplay -fdat -d3 /dev/zero After the playback stopped (3 sec), and the soc timeout (5 sec), the digital parts of the codec will remain powered up. This means that the DAI clocks are continue to run, the oscillator remain operational, etc. Use the SND_SOC_DAPM_POST_PMD widget to get notification about the stopped stream, and power down the digital part of the codec. If the analog bypass is enabled, than the codec will remain in BIAS_ON level, and things will work correctly. In case, if the bypass is disabled, than the codec will fall to BIAS_STANDBY than to BIAS_OFF level, as it used to. The digital part of DAC33 is initialized at every stream start (DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec) will have working DAI. When the codec is coming out from BIAS_OFF, the full power-up sequence followed by the same DAPM_PRE widget event will power up the digital part. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10 11:26:31 +00:00
SND_SOC_DAPM_PRE("Pre Playback", dac33_playback_event),
SND_SOC_DAPM_POST("Post Playback", dac33_playback_event),
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
static const struct snd_soc_dapm_route audio_map[] = {
/* Analog bypass */
{"Analog Left Bypass", "Switch", "LINEL"},
{"Analog Right Bypass", "Switch", "LINER"},
ASoC: tlv320dac33: Rename outpup amplifier widget Use better name for the widget, and remove the 'Power' from it's name. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:32 +00:00
{"Output Left Amplifier", NULL, "DACL"},
{"Output Right Amplifier", NULL, "DACR"},
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Add DAPM selection for LOM invert The L/R LOM line can be invertined side of the corresponding DAC, or inverted from the corresponding LOP. Add control for user space to select the source of the LOM inversion. When only the analog bypass is enabled, and the LOM is inverted from DAC output, we need to power the corresponding DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10 13:39:49 +00:00
{"Left Bypass PGA", NULL, "Analog Left Bypass"},
{"Right Bypass PGA", NULL, "Analog Right Bypass"},
{"Left LOM Inverted From", "DAC", "Left Bypass PGA"},
{"Right LOM Inverted From", "DAC", "Right Bypass PGA"},
{"Left LOM Inverted From", "LOP", "Analog Left Bypass"},
{"Right LOM Inverted From", "LOP", "Analog Right Bypass"},
{"Output Left Amplifier", NULL, "Left LOM Inverted From"},
{"Output Right Amplifier", NULL, "Right LOM Inverted From"},
{"DACL", NULL, "Left DAC Power"},
{"DACR", NULL, "Right DAC Power"},
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Add DAPM selection for LOM invert The L/R LOM line can be invertined side of the corresponding DAC, or inverted from the corresponding LOP. Add control for user space to select the source of the LOM inversion. When only the analog bypass is enabled, and the LOM is inverted from DAC output, we need to power the corresponding DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10 13:39:49 +00:00
{"Left Bypass PGA", NULL, "Left DAC Power"},
{"Right Bypass PGA", NULL, "Right DAC Power"},
ASoC: tlv320dac33: Move DAC LR power on to a supply widget The power for the DACs need to be enabled, even when only the analog bypass is in use with the codec, otherwise the audio is going to be distorted. Make sure that the DACs are powered all the time, when there is audio activity. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:33 +00:00
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* output */
ASoC: tlv320dac33: Rename outpup amplifier widget Use better name for the widget, and remove the 'Power' from it's name. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08 14:04:32 +00:00
{"LEFT_LO", NULL, "Output Left Amplifier"},
{"RIGHT_LO", NULL, "Output Right Amplifier"},
ASoC: tlv320dac33: Move codec power up to DAPM Move the codec power on (in reg 0x01, bit 4) from set_bias_level:SND_SOC_BIAS_ON to a DAPM supply. In this way we can be sure, that all the things within the codec is powered before the external amp is going to be enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-24 07:11:49 +00:00
{"LEFT_LO", NULL, "Codec Power"},
{"RIGHT_LO", NULL, "Codec Power"},
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
static int dac33_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
int ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
/* Coming from OFF, switch on the codec */
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = dac33_hard_power(codec, 1);
if (ret != 0)
return ret;
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
dac33_init_chip(codec);
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case SND_SOC_BIAS_OFF:
ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF Avoid calling the dac33_hard_power when the codec was already in BIAS_OFF state. This could happen in device suspend and module removal time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-17 11:21:46 +00:00
/* Do not power off, when the codec is already off */
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF Avoid calling the dac33_hard_power when the codec was already in BIAS_OFF state. This could happen in device suspend and module removal time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-17 11:21:46 +00:00
return 0;
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = dac33_hard_power(codec, 0);
if (ret != 0)
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
}
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
codec->dapm.bias_level = level;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
}
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = dac33->codec;
ASoC: tlv320dac33: Use usleep_range for delays Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-22 12:11:20 +00:00
unsigned int delay;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
unsigned long flags;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write16(codec, DAC33_NSAMPLE_MSB,
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
DAC33_THRREG(dac33->nsample));
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
/* Take the timestamps */
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->t_stamp2 = ktime_to_us(ktime_get());
dac33->t_stamp1 = dac33->t_stamp2;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_write16(codec, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
ASoC: tlv320dac33: Fix for early interrupt in FIFO Mode1 Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:57 +00:00
/* Enable Alarm Threshold IRQ with a delay */
ASoC: tlv320dac33: Use usleep_range for delays Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-22 12:11:20 +00:00
delay = SAMPLES_TO_US(dac33->burst_rate,
dac33->alarm_threshold) + 1000;
usleep_range(delay, delay + 500);
ASoC: tlv320dac33: Fix for early interrupt in FIFO Mode1 Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:57 +00:00
dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
/* Take the timestamp */
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->t_stamp1 = ktime_to_us(ktime_get());
/* Move back the timestamp with drain time */
dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
dac33_write16(codec, DAC33_PREFILL_MSB,
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
DAC33_THRREG(DAC33_MODE7_MARGIN));
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
/* Enable Upper Threshold IRQ */
dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MUT);
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
default:
dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
dac33->fifo_mode);
break;
}
}
static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = dac33->codec;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
unsigned long flags;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
/* Take the timestamp */
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->t_stamp2 = ktime_to_us(ktime_get());
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_write16(codec, DAC33_NSAMPLE_MSB,
DAC33_THRREG(dac33->nsample));
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/* At the moment we are not using interrupts in mode7 */
break;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
default:
dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
dac33->fifo_mode);
break;
}
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static void dac33_work(struct work_struct *work)
{
struct snd_soc_codec *codec;
struct tlv320dac33_priv *dac33;
u8 reg;
dac33 = container_of(work, struct tlv320dac33_priv, work);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
codec = dac33->codec;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
mutex_lock(&dac33->mutex);
switch (dac33->state) {
case DAC33_PREFILL:
dac33->state = DAC33_PLAYBACK;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_prefill_handler(dac33);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case DAC33_PLAYBACK:
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_playback_handler(dac33);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case DAC33_IDLE:
break;
case DAC33_FLUSH:
dac33->state = DAC33_IDLE;
/* Mask all interrupts from dac33 */
dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0);
/* flush fifo */
reg = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
reg |= DAC33_FIFOFLUSH;
dac33_write(codec, DAC33_FIFO_CTRL_A, reg);
break;
}
mutex_unlock(&dac33->mutex);
}
static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
{
struct snd_soc_codec *codec = dev;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
unsigned long flags;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->t_stamp1 = ktime_to_us(ktime_get());
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
/* Do not schedule the workqueue in Mode7 */
if (dac33->fifo_mode != DAC33_FIFO_MODE7)
queue_work(dac33->dac33_wq, &dac33->work);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return IRQ_HANDLED;
}
static void dac33_oscwait(struct snd_soc_codec *codec)
{
ASoC: tlv320dac33: Use usleep_range for delays Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-22 12:11:20 +00:00
int timeout = 60;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 reg;
do {
ASoC: tlv320dac33: Use usleep_range for delays Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-22 12:11:20 +00:00
usleep_range(1000, 2000);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_read(codec, DAC33_INT_OSC_STATUS, &reg);
} while (((reg & 0x03) != DAC33_OSCSTATUS_NORMAL) && timeout--);
if ((reg & 0x03) != DAC33_OSCSTATUS_NORMAL)
dev_err(codec->dev,
"internal oscillator calibration failed\n");
}
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
static int dac33_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
/* Stream started, save the substream pointer */
dac33->substream = substream;
ASoC: tlv320dac33: Add 32/24 bit audio support Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:18 +00:00
snd_pcm_hw_constraint_msbits(substream->runtime, 0, 32, 24);
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
return 0;
}
static void dac33_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
dac33->substream = NULL;
}
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
#define CALC_BURST_RATE(bclkdiv, bclk_per_sample) \
(BURST_BASEFREQ_HZ / bclkdiv / bclk_per_sample)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static int dac33_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Check parameters for validity */
switch (params_rate(params)) {
case 44100:
case 48000:
break;
default:
dev_err(codec->dev, "unsupported rate %d\n",
params_rate(params));
return -EINVAL;
}
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
dac33->fifo_size = DAC33_FIFO_SIZE_16BIT;
dac33->burst_rate = CALC_BURST_RATE(dac33->burst_bclkdiv, 32);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
ASoC: tlv320dac33: Add 32/24 bit audio support Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:18 +00:00
case SNDRV_PCM_FORMAT_S32_LE:
dac33->fifo_size = DAC33_FIFO_SIZE_24BIT;
dac33->burst_rate = CALC_BURST_RATE(dac33->burst_bclkdiv, 64);
break;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
default:
dev_err(codec->dev, "unsupported format %d\n",
params_format(params));
return -EINVAL;
}
return 0;
}
#define CALC_OSCSET(rate, refclk) ( \
ASoC: tlv320dac33: Correct the OSCSET calculation OSCSET calculation was not correct in case of 44.1KHz sampling rate. With small adjustment both 48 and 44.1 KHz calculation now gives the correct value. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:16 +00:00
((((rate * 10000) / refclk) * 4096) + 7000) / 10000)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
#define CALC_RATIOSET(rate, refclk) ( \
((((refclk * 100000) / rate) * 16384) + 50000) / 100000)
/*
* tlv320dac33 is strict on the sequence of the register writes, if the register
* writes happens in different order, than dac33 might end up in unknown state.
* Use the known, working sequence of register writes to initialize the dac33.
*/
static int dac33_prepare_chip(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int oscset, ratioset, pwr_ctrl, reg_tmp;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
u8 aictrl_a, aictrl_b, fifoctrl_a;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
switch (substream->runtime->rate) {
case 44100:
case 48000:
oscset = CALC_OSCSET(substream->runtime->rate, dac33->refclk);
ratioset = CALC_RATIOSET(substream->runtime->rate,
dac33->refclk);
break;
default:
dev_err(codec->dev, "unsupported rate %d\n",
substream->runtime->rate);
return -EINVAL;
}
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
aictrl_a &= ~(DAC33_NCYCL_MASK | DAC33_WLEN_MASK);
ASoC: tlv320dac33: Clearing FIFOFLUSH flag before playback In repeated playback the FIFOFLUSH bit remained set, and never has been cleared. Clear it during the setup phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:15 +00:00
/* Read FIFO control A, and clear FIFO flush bit */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
ASoC: tlv320dac33: Clearing FIFOFLUSH flag before playback In repeated playback the FIFOFLUSH bit remained set, and never has been cleared. Clear it during the setup phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:15 +00:00
fifoctrl_a &= ~DAC33_FIFOFLUSH;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a &= ~DAC33_WIDTH;
switch (substream->runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
aictrl_a |= (DAC33_NCYCL_16 | DAC33_WLEN_16);
fifoctrl_a |= DAC33_WIDTH;
break;
ASoC: tlv320dac33: Add 32/24 bit audio support Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:18 +00:00
case SNDRV_PCM_FORMAT_S32_LE:
aictrl_a |= (DAC33_NCYCL_32 | DAC33_WLEN_24);
break;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
default:
dev_err(codec->dev, "unsupported format %d\n",
substream->runtime->format);
return -EINVAL;
}
mutex_lock(&dac33->mutex);
ASoC: tlv320dac33: Support for turning off the codec Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:36 +00:00
if (!dac33->chip_power) {
/*
* Chip is not powered yet.
* Do the init in the dac33_set_bias_level later.
*/
mutex_unlock(&dac33->mutex);
return 0;
}
ASoC: tlv320dac33: Start/stop sequence change To avoid race condition especially in FIFO modes the sequence for enabling and disabling the codec need to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:21 +00:00
dac33_soft_power(codec, 0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_soft_power(codec, 1);
reg_tmp = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
dac33_write(codec, DAC33_INT_OSC_CTRL, reg_tmp);
/* Write registers 0x08 and 0x09 (MSB, LSB) */
dac33_write16(codec, DAC33_INT_OSC_FREQ_RAT_A, oscset);
ASoC: tlv320dac33: Lower the OSC calibration time To get correct calibration, we can decrease the time needed for the OSC to calibrate itself. With this change we can save ~15ms in the OSC calibration phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-04-12 06:09:17 +00:00
/* OSC calibration time */
dac33_write(codec, DAC33_CALIB_TIME, 96);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* adjustment treshold & step */
dac33_write(codec, DAC33_INT_OSC_CTRL_B, DAC33_ADJTHRSHLD(2) |
DAC33_ADJSTEP(1));
/* div=4 / gain=1 / div */
dac33_write(codec, DAC33_INT_OSC_CTRL_C, DAC33_REFDIV(4));
pwr_ctrl = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
pwr_ctrl |= DAC33_OSCPDNB | DAC33_DACRPDNB | DAC33_DACLPDNB;
dac33_write(codec, DAC33_PWR_CTRL, pwr_ctrl);
dac33_oscwait(codec);
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* Generic for all FIFO modes */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* 50-51 : ASRC Control registers */
ASoC: tlv320dac33: Internal clocking changes During validation of the internal clocking setup it has been found that the following settings were not configured in an optimal way: ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3, ratio of 2 has to be used (as the comment stated) DAC_CTRL_A: Fs = Fsref is the desired configuration instead of Fs = Fsref / 1.5 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 09:10:20 +00:00
dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCLKDIV(1));
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_ASRC_CTRL_B, 1); /* ??? */
/* Write registers 0x34 and 0x35 (MSB, LSB) */
dac33_write16(codec, DAC33_SRC_REF_CLK_RATIO_A, ratioset);
/* Set interrupts to high active */
dac33_write(codec, DAC33_INTP_CTRL_A, DAC33_INTPM_AHIGH);
} else {
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* FIFO bypass mode */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* 50-51 : ASRC Control registers */
dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCBYP);
dac33_write(codec, DAC33_ASRC_CTRL_B, 0); /* ??? */
}
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* Interrupt behaviour configuration */
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write(codec, DAC33_FIFO_IRQ_MODE_B,
DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL));
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33_write(codec, DAC33_FIFO_IRQ_MODE_A,
DAC33_UTM(DAC33_FIFO_IRQ_MODE_LEVEL));
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
/* in FIFO bypass mode, the interrupts are not used */
break;
}
aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
/*
* For mode1:
* Disable the FIFO bypass (Enable the use of FIFO)
* Select nSample mode
* BCLK is only running when data is needed by DAC33
*/
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a &= ~DAC33_FBYPAS;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
fifoctrl_a &= ~DAC33_FAUTO;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
if (dac33->keep_bclk)
aictrl_b |= DAC33_BCLKON;
else
aictrl_b &= ~DAC33_BCLKON;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/*
* For mode1:
* Disable the FIFO bypass (Enable the use of FIFO)
* Select Threshold mode
* BCLK is only running when data is needed by DAC33
*/
fifoctrl_a &= ~DAC33_FBYPAS;
fifoctrl_a |= DAC33_FAUTO;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
if (dac33->keep_bclk)
aictrl_b |= DAC33_BCLKON;
else
aictrl_b &= ~DAC33_BCLKON;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
/*
* For FIFO bypass mode:
* Enable the FIFO bypass (Disable the FIFO use)
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
* Set the BCLK as continuous
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
*/
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a |= DAC33_FBYPAS;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
aictrl_b |= DAC33_BCLKON;
break;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
dac33_write(codec, DAC33_FIFO_CTRL_A, fifoctrl_a);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
/*
* BCLK divide ratio
* 0: 1.5
* 1: 1
* 2: 2
* ...
* 254: 254
* 255: 255
*/
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
if (dac33->fifo_mode)
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C,
dac33->burst_bclkdiv);
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
else
ASoC: tlv320dac33: Add 32/24 bit audio support Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:18 +00:00
if (substream->runtime->format == SNDRV_PCM_FORMAT_S16_LE)
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 32);
else
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 16);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write16(codec, DAC33_ATHR_MSB,
DAC33_THRREG(dac33->alarm_threshold));
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/*
* Configure the threshold levels, and leave 10 sample space
* at the bottom, and also at the top of the FIFO
*/
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(dac33->uthr));
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
dac33_write16(codec, DAC33_LTHR_MSB,
DAC33_THRREG(DAC33_MODE7_MARGIN));
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
break;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
mutex_unlock(&dac33->mutex);
return 0;
}
static void dac33_calculate_times(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
unsigned int period_size = substream->runtime->period_size;
unsigned int rate = substream->runtime->rate;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int nsample_limit;
ASoC: tlv320dac33: Skip calculations in FIFO Bypass mode There is no need for calculations for FIFO bypass mode. Just in case set the nsample maximum limit, which has been done in the calculation phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:58 +00:00
/* In bypass mode we don't need to calculate */
if (!dac33->fifo_mode)
return;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
/* Number of samples under i2c latency */
dac33->alarm_threshold = US_TO_SAMPLES(rate,
dac33->mode1_latency);
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
nsample_limit = dac33->fifo_size - dac33->alarm_threshold;
ASoC: tlv320dac33: Mode1 FIFO auto configuration fix Do not allow invalid (too big) nSample value, when FIFO Mode1 and automatic fifo configuration has been selected. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-29 06:49:37 +00:00
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
if (period_size <= dac33->alarm_threshold)
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
/*
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
* Configure nSamaple to number of periods,
* which covers the latency requironment.
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
*/
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
dac33->nsample = period_size *
((dac33->alarm_threshold / period_size) +
(dac33->alarm_threshold % period_size ?
1 : 0));
else if (period_size > nsample_limit)
dac33->nsample = nsample_limit;
else
dac33->nsample = period_size;
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
dac33->nsample);
dac33->t_stamp1 = 0;
dac33->t_stamp2 = 0;
break;
case DAC33_FIFO_MODE7:
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
dac33->uthr = UTHR_FROM_PERIOD_SIZE(period_size, rate,
dac33->burst_rate) + 9;
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
if (dac33->uthr > (dac33->fifo_size - DAC33_MODE7_MARGIN))
dac33->uthr = dac33->fifo_size - DAC33_MODE7_MARGIN;
if (dac33->uthr < (DAC33_MODE7_MARGIN + 10))
dac33->uthr = (DAC33_MODE7_MARGIN + 10);
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->mode7_us_to_lthr =
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
SAMPLES_TO_US(substream->runtime->rate,
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
dac33->uthr - DAC33_MODE7_MARGIN + 1);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
dac33->t_stamp1 = 0;
break;
default:
break;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
static int dac33_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->state = DAC33_PREFILL;
queue_work(dac33->dac33_wq, &dac33->work);
}
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->state = DAC33_FLUSH;
queue_work(dac33->dac33_wq, &dac33->work);
}
break;
default:
ret = -EINVAL;
}
return ret;
}
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
static snd_pcm_sframes_t dac33_dai_delay(
struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct snd_soc_codec *codec = rtd->codec;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
unsigned long long t0, t1, t_now;
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
unsigned int time_delta, uthr;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
unsigned long flags;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_BYPASS:
break;
case DAC33_FIFO_MODE1:
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
t0 = dac33->t_stamp1;
t1 = dac33->t_stamp2;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t1)
goto out;
if (t0 > t1) {
/*
* Phase 1:
* After Alarm threshold, and before nSample write
*/
time_delta = t_now - t0;
samples_out = time_delta ? US_TO_SAMPLES(
substream->runtime->rate,
time_delta) : 0;
if (likely(dac33->alarm_threshold > samples_out))
delay = dac33->alarm_threshold - samples_out;
else
delay = 0;
} else if ((t_now - t1) <= dac33->mode1_us_burst) {
/*
* Phase 2:
* After nSample write (during burst operation)
*/
time_delta = t_now - t0;
samples_out = time_delta ? US_TO_SAMPLES(
substream->runtime->rate,
time_delta) : 0;
time_delta = t_now - t1;
samples_in = time_delta ? US_TO_SAMPLES(
dac33->burst_rate,
time_delta) : 0;
samples = dac33->alarm_threshold;
samples += (samples_in - samples_out);
if (likely(samples > 0))
delay = samples;
else
delay = 0;
} else {
/*
* Phase 3:
* After burst operation, before next alarm threshold
*/
time_delta = t_now - t0;
samples_out = time_delta ? US_TO_SAMPLES(
substream->runtime->rate,
time_delta) : 0;
samples_in = dac33->nsample;
samples = dac33->alarm_threshold;
samples += (samples_in - samples_out);
if (likely(samples > 0))
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
delay = samples > dac33->fifo_size ?
dac33->fifo_size : samples;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
else
delay = 0;
}
break;
case DAC33_FIFO_MODE7:
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_lock_irqsave(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
t0 = dac33->t_stamp1;
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
uthr = dac33->uthr;
ASoC: tlv320dac33: Fix inconsistent spinlock usage The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18 13:15:11 +00:00
spin_unlock_irqrestore(&dac33->lock, flags);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t0)
goto out;
if (t_now <= t0) {
/*
* Either the timestamps are messed or equal. Report
* maximum delay
*/
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
delay = uthr;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
goto out;
}
time_delta = t_now - t0;
if (time_delta <= dac33->mode7_us_to_lthr) {
/*
* Phase 1:
* After burst (draining phase)
*/
samples_out = US_TO_SAMPLES(
substream->runtime->rate,
time_delta);
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
if (likely(uthr > samples_out))
delay = uthr - samples_out;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
else
delay = 0;
} else {
/*
* Phase 2:
* During burst operation
*/
time_delta = time_delta - dac33->mode7_us_to_lthr;
samples_out = US_TO_SAMPLES(
substream->runtime->rate,
time_delta);
samples_in = US_TO_SAMPLES(
dac33->burst_rate,
time_delta);
ASoC: tlv320dac33: Some cleanup for 32/24 bit support Change the structure of FIFO handling in order to pave the way for adding 32/24 bit audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:17 +00:00
delay = DAC33_MODE7_MARGIN + samples_in - samples_out;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
ASoC: tlv320dac33: Add support for changing upper threshold Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07 07:50:39 +00:00
if (unlikely(delay > uthr))
delay = uthr;
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
}
break;
default:
dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
dac33->fifo_mode);
break;
}
out:
return delay;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static int dac33_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 ioc_reg, asrcb_reg;
ioc_reg = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
asrcb_reg = dac33_read_reg_cache(codec, DAC33_ASRC_CTRL_B);
switch (clk_id) {
case TLV320DAC33_MCLK:
ioc_reg |= DAC33_REFSEL;
asrcb_reg |= DAC33_SRCREFSEL;
break;
case TLV320DAC33_SLEEPCLK:
ioc_reg &= ~DAC33_REFSEL;
asrcb_reg &= ~DAC33_SRCREFSEL;
break;
default:
dev_err(codec->dev, "Invalid clock ID (%d)\n", clk_id);
break;
}
dac33->refclk = freq;
dac33_write_reg_cache(codec, DAC33_INT_OSC_CTRL, ioc_reg);
dac33_write_reg_cache(codec, DAC33_ASRC_CTRL_B, asrcb_reg);
return 0;
}
static int dac33_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 aictrl_a, aictrl_b;
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
/* Codec Master */
aictrl_a |= (DAC33_MSBCLK | DAC33_MSWCLK);
break;
case SND_SOC_DAIFMT_CBS_CFS:
/* Codec Slave */
ASoC: tlv320dac33: Safety check for codec slave mode The currently available FIFO modes (mode1 and mode7) require master mode from the codec. Do not allow the slave configuration when the FIFO is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:23 +00:00
if (dac33->fifo_mode) {
dev_err(codec->dev, "FIFO mode requires master mode\n");
return -EINVAL;
} else
aictrl_a &= ~(DAC33_MSBCLK | DAC33_MSWCLK);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
default:
return -EINVAL;
}
aictrl_a &= ~DAC33_AFMT_MASK;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
aictrl_a |= DAC33_AFMT_I2S;
break;
case SND_SOC_DAIFMT_DSP_A:
aictrl_a |= DAC33_AFMT_DSP;
aictrl_b &= ~DAC33_DATA_DELAY_MASK;
ASoC: tlv320dac33: Fix DSP modes To make DSP_A mode working correctly the data delay should be configured to 0. DSP_B mode thus can not be used with DAC33, so remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 09:10:19 +00:00
aictrl_b |= DAC33_DATA_DELAY(0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case SND_SOC_DAIFMT_RIGHT_J:
aictrl_a |= DAC33_AFMT_RIGHT_J;
break;
case SND_SOC_DAIFMT_LEFT_J:
aictrl_a |= DAC33_AFMT_LEFT_J;
break;
default:
dev_err(codec->dev, "Unsupported format (%u)\n",
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
return -EINVAL;
}
dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
return 0;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static int dac33_soc_probe(struct snd_soc_codec *codec)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
codec->control_data = dac33->control_data;
codec->hw_write = (hw_write_t) i2c_master_send;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
codec->dapm.idle_bias_off = 1;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dac33->codec = codec;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
/* Read the tlv320dac33 ID registers */
ret = dac33_hard_power(codec, 1);
if (ret != 0) {
dev_err(codec->dev, "Failed to power up codec: %d\n", ret);
goto err_power;
}
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
ret = dac33_read_id(codec);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dac33_hard_power(codec, 0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Error handling for broken chip Correct/Implement handling of broken chip. Fail the soc_prope if the communication with the chip fails (can not read chip ID). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-26 08:45:59 +00:00
if (ret < 0) {
dev_err(codec->dev, "Failed to read chip ID: %d\n", ret);
ret = -ENODEV;
goto err_power;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
/* Check if the IRQ number is valid and request it */
if (dac33->irq >= 0) {
ret = request_irq(dac33->irq, dac33_interrupt_handler,
sound: irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22 08:59:20 +00:00
IRQF_TRIGGER_RISING,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
codec->name, codec);
if (ret < 0) {
dev_err(codec->dev, "Could not request IRQ%d (%d)\n",
dac33->irq, ret);
dac33->irq = -1;
}
if (dac33->irq != -1) {
/* Setup work queue */
dac33->dac33_wq =
create_singlethread_workqueue("tlv320dac33");
if (dac33->dac33_wq == NULL) {
free_irq(dac33->irq, codec);
return -ENOMEM;
}
INIT_WORK(&dac33->work, dac33_work);
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
/* Only add the FIFO controls, if we have valid IRQ number */
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
if (dac33->irq >= 0)
ASoC: tlv320dac33: Add support for automatic FIFO configuration Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:55 +00:00
snd_soc_add_controls(codec, dac33_mode_snd_controls,
ARRAY_SIZE(dac33_mode_snd_controls));
ASoC: tlv320dac33: Remove manual FIFO configuration The manual FIFO configuration was the first version to enable the use of the FIFO in the codec. It had served it's purpose as debugging aid, but the automatic FIFO configuration is much safer to use. The removal of the manual controls, and configuration makes it easier to add new features for the codec later, since the manual mode neded different ways to calculate, and protect against misconfiguration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:16 +00:00
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
err_power:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return ret;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static int dac33_soc_remove(struct snd_soc_codec *codec)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
if (dac33->irq >= 0) {
free_irq(dac33->irq, dac33->codec);
destroy_workqueue(dac33->dac33_wq);
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
}
ASoC: Drop unused state parameter from CODEC suspend callback The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02 09:18:28 +00:00
static int dac33_soc_suspend(struct snd_soc_codec *codec)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static int dac33_soc_resume(struct snd_soc_codec *codec)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static struct snd_soc_codec_driver soc_codec_dev_tlv320dac33 = {
.read = dac33_read_reg_cache,
.write = dac33_write_locked,
.set_bias_level = dac33_set_bias_level,
.reg_cache_size = ARRAY_SIZE(dac33_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = dac33_reg,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
.probe = dac33_soc_probe,
.remove = dac33_soc_remove,
.suspend = dac33_soc_suspend,
.resume = dac33_soc_resume,
ASoC: tlv320dac33: Convert to table based init Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11 10:11:55 +00:00
.controls = dac33_snd_controls,
.num_controls = ARRAY_SIZE(dac33_snd_controls),
.dapm_widgets = dac33_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(dac33_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
#define DAC33_RATES (SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)
ASoC: tlv320dac33: Add 32/24 bit audio support Add support for 24 bit audio (with S32_LE msbits 24). The reason to limit the msbits to 24, is that the FIFO can be configured for 16 or 24 bit layout. It is unknown how the codec would downsample from 32 to 24 bit, if the interface is configured to receive 32 bit data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 08:45:18 +00:00
#define DAC33_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: Constify snd_soc_dai_ops structs Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 10:40:40 +00:00
static const struct snd_soc_dai_ops dac33_dai_ops = {
ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structure As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:35 +00:00
.startup = dac33_startup,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
.shutdown = dac33_shutdown,
.hw_params = dac33_hw_params,
.trigger = dac33_pcm_trigger,
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
.delay = dac33_dai_delay,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
.set_sysclk = dac33_set_dai_sysclk,
.set_fmt = dac33_set_dai_fmt,
};
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static struct snd_soc_dai_driver dac33_dai = {
.name = "tlv320dac33-hifi",
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = DAC33_RATES,
.formats = DAC33_FORMATS,},
.ops = &dac33_dai_ops,
};
ASoC: Add missing __devexit and __devinit annotations Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-12 14:13:00 +00:00
static int __devinit dac33_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
struct tlv320dac33_platform_data *pdata;
struct tlv320dac33_priv *dac33;
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
int ret, i;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (client->dev.platform_data == NULL) {
dev_err(&client->dev, "Platform data not set\n");
return -ENODEV;
}
pdata = client->dev.platform_data;
ASoC: Convert tlv320dac33 to devm_kzalloc() Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-29 04:11:00 +00:00
dac33 = devm_kzalloc(&client->dev, sizeof(struct tlv320dac33_priv),
GFP_KERNEL);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (dac33 == NULL)
return -ENOMEM;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dac33->control_data = client;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
mutex_init(&dac33->mutex);
ASoC: tlv320dac33: FIFO caused delay reporting Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:10:01 +00:00
spin_lock_init(&dac33->lock);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
i2c_set_clientdata(client, dac33);
dac33->power_gpio = pdata->power_gpio;
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
dac33->burst_bclkdiv = pdata->burst_bclkdiv;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
dac33->keep_bclk = pdata->keep_bclk;
ASoC: tlv320dac33: Revisit the FIFO Mode1 handling Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28 12:26:54 +00:00
dac33->mode1_latency = pdata->mode1_latency;
if (!dac33->mode1_latency)
dac33->mode1_latency = 10000; /* 10ms */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->irq = client->irq;
/* Disable FIFO use by default */
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
dac33->fifo_mode = DAC33_FIFO_BYPASS;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Check if the reset GPIO number is valid and request it */
if (dac33->power_gpio >= 0) {
ret = gpio_request(dac33->power_gpio, "tlv320dac33 reset");
if (ret < 0) {
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dev_err(&client->dev,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
"Failed to request reset GPIO (%d)\n",
dac33->power_gpio);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
goto err_gpio;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
gpio_direction_output(dac33->power_gpio, 0);
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
for (i = 0; i < ARRAY_SIZE(dac33->supplies); i++)
dac33->supplies[i].supply = dac33_supply_names[i];
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(dac33->supplies),
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
dac33->supplies);
if (ret != 0) {
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dev_err(&client->dev, "Failed to request supplies: %d\n", ret);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
goto err_get;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
ret = snd_soc_register_codec(&client->dev,
&soc_codec_dev_tlv320dac33, &dac33_dai, 1);
if (ret < 0)
goto err_register;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return ret;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
err_register:
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
err_get:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (dac33->power_gpio >= 0)
gpio_free(dac33->power_gpio);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
err_gpio:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return ret;
}
ASoC: Add missing __devexit and __devinit annotations Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-12 14:13:00 +00:00
static int __devexit dac33_i2c_remove(struct i2c_client *client)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
struct tlv320dac33_priv *dac33 = i2c_get_clientdata(client);
ASoC: tlv320dac33: Revised module loading, and DAC33 ID read Optimize the way how tlv320dac33 is powered uppon module and soc initialization. Also read the DAC33 ID registers, and update the reg_cache to reflect it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-30 11:59:34 +00:00
if (unlikely(dac33->chip_power))
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
dac33_hard_power(dac33->codec, 0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (dac33->power_gpio >= 0)
gpio_free(dac33->power_gpio);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
snd_soc_unregister_codec(&client->dev);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
}
static const struct i2c_device_id tlv320dac33_i2c_id[] = {
{
.name = "tlv320dac33",
.driver_data = 0,
},
{ },
};
ASoC: tlv320dac33: add MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-04 07:18:18 +00:00
MODULE_DEVICE_TABLE(i2c, tlv320dac33_i2c_id);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static struct i2c_driver tlv320dac33_i2c_driver = {
.driver = {
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
.name = "tlv320dac33-codec",
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
.owner = THIS_MODULE,
},
.probe = dac33_i2c_probe,
.remove = __devexit_p(dac33_i2c_remove),
.id_table = tlv320dac33_i2c_id,
};
static int __init dac33_module_init(void)
{
int r;
r = i2c_add_driver(&tlv320dac33_i2c_driver);
if (r < 0) {
printk(KERN_ERR "DAC33: driver registration failed\n");
return r;
}
return 0;
}
module_init(dac33_module_init);
static void __exit dac33_module_exit(void)
{
i2c_del_driver(&tlv320dac33_i2c_driver);
}
module_exit(dac33_module_exit);
MODULE_DESCRIPTION("ASoC TLV320DAC33 codec driver");
ASoC: tlv320dac33: Update e-mail address Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-05-03 15:11:36 +00:00
MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink