linux/arch/sparc/prom/misc_64.c

448 lines
8.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/ldc.h>
static int prom_service_exists(const char *service_name)
{
unsigned long args[5];
args[0] = (unsigned long) "test";
args[1] = 1;
args[2] = 1;
args[3] = (unsigned long) service_name;
args[4] = (unsigned long) -1;
p1275_cmd_direct(args);
if (args[4])
return 0;
return 1;
}
void prom_sun4v_guest_soft_state(void)
{
const char *svc = "SUNW,soft-state-supported";
unsigned long args[3];
if (!prom_service_exists(svc))
return;
args[0] = (unsigned long) svc;
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
}
/* Reset and reboot the machine with the command 'bcommand'. */
void prom_reboot(const char *bcommand)
{
unsigned long args[4];
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
ldom_reboot(bcommand);
#endif
args[0] = (unsigned long) "boot";
args[1] = 1;
args[2] = 0;
args[3] = (unsigned long) bcommand;
p1275_cmd_direct(args);
}
/* Forth evaluate the expression contained in 'fstring'. */
void prom_feval(const char *fstring)
{
unsigned long args[5];
if (!fstring || fstring[0] == 0)
return;
args[0] = (unsigned long) "interpret";
args[1] = 1;
args[2] = 1;
args[3] = (unsigned long) fstring;
args[4] = (unsigned long) -1;
p1275_cmd_direct(args);
}
EXPORT_SYMBOL(prom_feval);
/* Drop into the prom, with the chance to continue with the 'go'
* prom command.
*/
void prom_cmdline(void)
{
unsigned long args[3];
unsigned long flags;
local_irq_save(flags);
#ifdef CONFIG_SMP
smp_capture();
#endif
args[0] = (unsigned long) "enter";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
#ifdef CONFIG_SMP
smp_release();
#endif
local_irq_restore(flags);
}
/* Drop into the prom, but completely terminate the program.
* No chance of continuing.
*/
void notrace prom_halt(void)
{
unsigned long args[3];
[SPARC64]: Initial LDOM cpu hotplug support. Only adding cpus is supports at the moment, removal will come next. When new cpus are configured, the machine description is updated. When we get the configure request we pass in a cpu mask of to-be-added cpus to the mdesc CPU node parser so it only fetches information for those cpus. That code also proceeds to update the SMT/multi-core scheduling bitmaps. cpu_up() does all the work and we return the status back over the DS channel. CPUs via dr-cpu need to be booted straight out of the hypervisor, and this requires: 1) A new trampoline mechanism. CPUs are booted straight out of the hypervisor with MMU disabled and running in physical addresses with no mappings installed in the TLB. The new hvtramp.S code sets up the critical cpu state, installs the locked TLB mappings for the kernel, and turns the MMU on. It then proceeds to follow the logic of the existing trampoline.S SMP cpu bringup code. 2) All calls into OBP have to be disallowed when domaining is enabled. Since cpus boot straight into the kernel from the hypervisor, OBP has no state about that cpu and therefore cannot handle being invoked on that cpu. Luckily it's only a handful of interfaces which can be called after the OBP device tree is obtained. For example, rebooting, halting, powering-off, and setting options node variables. CPU removal support will require some infrastructure changes here. Namely we'll have to process the requests via a true kernel thread instead of in a workqueue. workqueues run on a per-cpu thread, but when unconfiguring we might need to force the thread to execute on another cpu if the current cpu is the one being removed. Removal of a cpu also causes the kernel to destroy that cpu's workqueue running thread. Another issue on removal is that we may have interrupts still pointing to the cpu-to-be-removed. So new code will be needed to walk the active INO list and retarget those cpus as-needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-13 23:03:42 +00:00
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
ldom_power_off();
#endif
again:
args[0] = (unsigned long) "exit";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
goto again; /* PROM is out to get me -DaveM */
}
void prom_halt_power_off(void)
{
unsigned long args[3];
[SPARC64]: Initial LDOM cpu hotplug support. Only adding cpus is supports at the moment, removal will come next. When new cpus are configured, the machine description is updated. When we get the configure request we pass in a cpu mask of to-be-added cpus to the mdesc CPU node parser so it only fetches information for those cpus. That code also proceeds to update the SMT/multi-core scheduling bitmaps. cpu_up() does all the work and we return the status back over the DS channel. CPUs via dr-cpu need to be booted straight out of the hypervisor, and this requires: 1) A new trampoline mechanism. CPUs are booted straight out of the hypervisor with MMU disabled and running in physical addresses with no mappings installed in the TLB. The new hvtramp.S code sets up the critical cpu state, installs the locked TLB mappings for the kernel, and turns the MMU on. It then proceeds to follow the logic of the existing trampoline.S SMP cpu bringup code. 2) All calls into OBP have to be disallowed when domaining is enabled. Since cpus boot straight into the kernel from the hypervisor, OBP has no state about that cpu and therefore cannot handle being invoked on that cpu. Luckily it's only a handful of interfaces which can be called after the OBP device tree is obtained. For example, rebooting, halting, powering-off, and setting options node variables. CPU removal support will require some infrastructure changes here. Namely we'll have to process the requests via a true kernel thread instead of in a workqueue. workqueues run on a per-cpu thread, but when unconfiguring we might need to force the thread to execute on another cpu if the current cpu is the one being removed. Removal of a cpu also causes the kernel to destroy that cpu's workqueue running thread. Another issue on removal is that we may have interrupts still pointing to the cpu-to-be-removed. So new code will be needed to walk the active INO list and retarget those cpus as-needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-13 23:03:42 +00:00
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
ldom_power_off();
#endif
args[0] = (unsigned long) "SUNW,power-off";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
/* if nothing else helps, we just halt */
prom_halt();
}
/* Get the idprom and stuff it into buffer 'idbuf'. Returns the
* format type. 'num_bytes' is the number of bytes that your idbuf
* has space for. Returns 0xff on error.
*/
unsigned char prom_get_idprom(char *idbuf, int num_bytes)
{
int len;
len = prom_getproplen(prom_root_node, "idprom");
if ((len >num_bytes) || (len == -1))
return 0xff;
if (!prom_getproperty(prom_root_node, "idprom", idbuf, num_bytes))
return idbuf[0];
return 0xff;
}
int prom_get_mmu_ihandle(void)
{
phandle node;
int ret;
if (prom_mmu_ihandle_cache != 0)
return prom_mmu_ihandle_cache;
node = prom_finddevice(prom_chosen_path);
ret = prom_getint(node, prom_mmu_name);
if (ret == -1 || ret == 0)
prom_mmu_ihandle_cache = -1;
else
prom_mmu_ihandle_cache = ret;
return ret;
}
static int prom_get_memory_ihandle(void)
{
static int memory_ihandle_cache;
phandle node;
int ret;
if (memory_ihandle_cache != 0)
return memory_ihandle_cache;
node = prom_finddevice("/chosen");
ret = prom_getint(node, "memory");
if (ret == -1 || ret == 0)
memory_ihandle_cache = -1;
else
memory_ihandle_cache = ret;
return ret;
}
/* Load explicit I/D TLB entries. */
static long tlb_load(const char *type, unsigned long index,
unsigned long tte_data, unsigned long vaddr)
{
unsigned long args[9];
args[0] = (unsigned long) prom_callmethod_name;
args[1] = 5;
args[2] = 1;
args[3] = (unsigned long) type;
args[4] = (unsigned int) prom_get_mmu_ihandle();
args[5] = vaddr;
args[6] = tte_data;
args[7] = index;
args[8] = (unsigned long) -1;
p1275_cmd_direct(args);
return (long) args[8];
}
long prom_itlb_load(unsigned long index,
unsigned long tte_data,
unsigned long vaddr)
{
return tlb_load("SUNW,itlb-load", index, tte_data, vaddr);
}
long prom_dtlb_load(unsigned long index,
unsigned long tte_data,
unsigned long vaddr)
{
return tlb_load("SUNW,dtlb-load", index, tte_data, vaddr);
}
int prom_map(int mode, unsigned long size,
unsigned long vaddr, unsigned long paddr)
{
unsigned long args[11];
int ret;
args[0] = (unsigned long) prom_callmethod_name;
args[1] = 7;
args[2] = 1;
args[3] = (unsigned long) prom_map_name;
args[4] = (unsigned int) prom_get_mmu_ihandle();
args[5] = (unsigned int) mode;
args[6] = size;
args[7] = vaddr;
args[8] = 0;
args[9] = paddr;
args[10] = (unsigned long) -1;
p1275_cmd_direct(args);
ret = (int) args[10];
if (ret == 0)
ret = -1;
return ret;
}
void prom_unmap(unsigned long size, unsigned long vaddr)
{
unsigned long args[7];
args[0] = (unsigned long) prom_callmethod_name;
args[1] = 4;
args[2] = 0;
args[3] = (unsigned long) prom_unmap_name;
args[4] = (unsigned int) prom_get_mmu_ihandle();
args[5] = size;
args[6] = vaddr;
p1275_cmd_direct(args);
}
/* Set aside physical memory which is not touched or modified
* across soft resets.
*/
int prom_retain(const char *name, unsigned long size,
unsigned long align, unsigned long *paddr)
{
unsigned long args[11];
args[0] = (unsigned long) prom_callmethod_name;
args[1] = 5;
args[2] = 3;
args[3] = (unsigned long) "SUNW,retain";
args[4] = (unsigned int) prom_get_memory_ihandle();
args[5] = align;
args[6] = size;
args[7] = (unsigned long) name;
args[8] = (unsigned long) -1;
args[9] = (unsigned long) -1;
args[10] = (unsigned long) -1;
p1275_cmd_direct(args);
if (args[8])
return (int) args[8];
/* Next we get "phys_high" then "phys_low". On 64-bit
* the phys_high cell is don't care since the phys_low
* cell has the full value.
*/
*paddr = args[10];
return 0;
}
/* Get "Unumber" string for the SIMM at the given
* memory address. Usually this will be of the form
* "Uxxxx" where xxxx is a decimal number which is
* etched into the motherboard next to the SIMM slot
* in question.
*/
int prom_getunumber(int syndrome_code,
unsigned long phys_addr,
char *buf, int buflen)
{
unsigned long args[12];
args[0] = (unsigned long) prom_callmethod_name;
args[1] = 7;
args[2] = 2;
args[3] = (unsigned long) "SUNW,get-unumber";
args[4] = (unsigned int) prom_get_memory_ihandle();
args[5] = buflen;
args[6] = (unsigned long) buf;
args[7] = 0;
args[8] = phys_addr;
args[9] = (unsigned int) syndrome_code;
args[10] = (unsigned long) -1;
args[11] = (unsigned long) -1;
p1275_cmd_direct(args);
return (int) args[10];
}
/* Power management extensions. */
void prom_sleepself(void)
{
unsigned long args[3];
args[0] = (unsigned long) "SUNW,sleep-self";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
}
int prom_sleepsystem(void)
{
unsigned long args[4];
args[0] = (unsigned long) "SUNW,sleep-system";
args[1] = 0;
args[2] = 1;
args[3] = (unsigned long) -1;
p1275_cmd_direct(args);
return (int) args[3];
}
int prom_wakeupsystem(void)
{
unsigned long args[4];
args[0] = (unsigned long) "SUNW,wakeup-system";
args[1] = 0;
args[2] = 1;
args[3] = (unsigned long) -1;
p1275_cmd_direct(args);
return (int) args[3];
}
#ifdef CONFIG_SMP
void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg)
{
unsigned long args[6];
args[0] = (unsigned long) "SUNW,start-cpu";
args[1] = 3;
args[2] = 0;
args[3] = (unsigned int) cpunode;
args[4] = pc;
args[5] = arg;
p1275_cmd_direct(args);
}
void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg)
{
unsigned long args[6];
args[0] = (unsigned long) "SUNW,start-cpu-by-cpuid";
args[1] = 3;
args[2] = 0;
args[3] = (unsigned int) cpuid;
args[4] = pc;
args[5] = arg;
p1275_cmd_direct(args);
}
void prom_stopcpu_cpuid(int cpuid)
{
unsigned long args[4];
args[0] = (unsigned long) "SUNW,stop-cpu-by-cpuid";
args[1] = 1;
args[2] = 0;
args[3] = (unsigned int) cpuid;
p1275_cmd_direct(args);
}
void prom_stopself(void)
{
unsigned long args[3];
args[0] = (unsigned long) "SUNW,stop-self";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
}
void prom_idleself(void)
{
unsigned long args[3];
args[0] = (unsigned long) "SUNW,idle-self";
args[1] = 0;
args[2] = 0;
p1275_cmd_direct(args);
}
void prom_resumecpu(int cpunode)
{
unsigned long args[4];
args[0] = (unsigned long) "SUNW,resume-cpu";
args[1] = 1;
args[2] = 0;
args[3] = (unsigned int) cpunode;
p1275_cmd_direct(args);
}
#endif