leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5004efbb36
linux/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x

42 lines
1.4 KiB
Plaintext
Raw Normal View History

iio: health/afe440x: Remove channel names These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:36:58 +00:00
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
Date: May 2016
iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-02 17:50:44 +00:00
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get measured values from the ADC for these stages. Y is the
iio: health/afe440x: Remove channel names These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:36:58 +00:00
specific stage number corresponding to datasheet stage names
as follows:
1 -> LED2
2 -> ALED2/LED3
3 -> LED1
4 -> ALED1/LED4
Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
respectively which simply helper channels containing the
calculated difference in the value of stage 1 - 2 and 3 - 4.
The values are expressed in 24-bit twos complement.
iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-02 17:50:44 +00:00
iio: health/afe440x: Remove channel names These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:36:58 +00:00
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
Date: May 2016
iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-02 17:50:44 +00:00
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the offset cancellation DAC setting for these
stages. The values are expressed in 5-bit sign-magnitude.
iio: health/afe440x: Make gain settings a modifier for the stages Currently the TIA gain settings are exported to userspace as sysfs entries that do not clearly represent their internal relation to the sampling stages. The gain settings are enabled on a per-stage basis, this can be seen in figure 24 of the current AFE4404 datasheet. These gain settings should therefore be tied to the channels that are read during these stages. Make this change here. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:37:00 +00:00
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the resistance and the capacitance settings for the
Transimpedance Amplifier during the associated stage.
iio: health/afe440x: Remove channel names These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:36:58 +00:00
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
Date: May 2016
iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-02 17:50:44 +00:00
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
iio: health/afe440x: Remove channel names These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-01 20:36:58 +00:00
Get and set the LED current for the specified LED active during
this stage. Y is the specific stage number.
Reference in New Issue Copy Permalink