leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4ea3f05614
linux/arch/arm64/crypto/aes-modes.S

436 lines
9.9 KiB
ArmAsm
Raw Normal View History

arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
/*
* linux/arch/arm64/crypto/aes-modes.S - chaining mode wrappers for AES
*
crypto: arm64/aes - add NEON/Crypto Extensions CBCMAC/CMAC/XCBC driver On ARMv8 implementations that do not support the Crypto Extensions, such as the Raspberry Pi 3, the CCM driver falls back to the generic table based AES implementation to perform the MAC part of the algorithm, which is slow and not time invariant. So add a CBCMAC implementation to the shared glue code between NEON AES and Crypto Extensions AES, so that it can be used instead now that the CCM driver has been updated to look for CBCMAC implementations other than the one it supplies itself. Also, given how these algorithms mostly only differ in the way the key handling and the final encryption are implemented, expose CMAC and XCBC algorithms as well based on the same core update code. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 14:49:37 +00:00
* Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* included by aes-ce.S and aes-neon.S */
.text
.align 4
aes_encrypt_block4x:
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
encrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
ENDPROC(aes_encrypt_block4x)
aes_decrypt_block4x:
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
decrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
ENDPROC(aes_decrypt_block4x)
/*
* aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
* int blocks)
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
* aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
* int blocks)
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
*/
AES_ENTRY(aes_ecb_encrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
enc_prepare w3, x2, x5
.LecbencloopNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lecbenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_encrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
st1 {v0.16b-v3.16b}, [x0], #64
b .LecbencloopNx
.Lecbenc1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lecbencout
.Lecbencloop:
ld1 {v0.16b}, [x1], #16 /* get next pt block */
encrypt_block v0, w3, x2, x5, w6
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lecbencloop
.Lecbencout:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_ecb_encrypt)
AES_ENTRY(aes_ecb_decrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
dec_prepare w3, x2, x5
.LecbdecloopNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lecbdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_decrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
st1 {v0.16b-v3.16b}, [x0], #64
b .LecbdecloopNx
.Lecbdec1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lecbdecout
.Lecbdecloop:
ld1 {v0.16b}, [x1], #16 /* get next ct block */
decrypt_block v0, w3, x2, x5, w6
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lecbdecloop
.Lecbdecout:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_ecb_decrypt)
/*
* aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
* int blocks, u8 iv[])
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
* aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
* int blocks, u8 iv[])
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
*/
AES_ENTRY(aes_cbc_encrypt)
crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path CBC encryption is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC encrypt which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:52 +00:00
ld1 {v4.16b}, [x5] /* get iv */
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
enc_prepare w3, x2, x6
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path CBC encryption is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC encrypt which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:52 +00:00
.Lcbcencloop4x:
subs w4, w4, #4
bmi .Lcbcenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
eor v0.16b, v0.16b, v4.16b /* ..and xor with iv */
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
encrypt_block v0, w3, x2, x6, w7
crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path CBC encryption is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC encrypt which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:52 +00:00
eor v1.16b, v1.16b, v0.16b
encrypt_block v1, w3, x2, x6, w7
eor v2.16b, v2.16b, v1.16b
encrypt_block v2, w3, x2, x6, w7
eor v3.16b, v3.16b, v2.16b
encrypt_block v3, w3, x2, x6, w7
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v3.16b
b .Lcbcencloop4x
.Lcbcenc1x:
adds w4, w4, #4
beq .Lcbcencout
.Lcbcencloop:
ld1 {v0.16b}, [x1], #16 /* get next pt block */
eor v4.16b, v4.16b, v0.16b /* ..and xor with iv */
encrypt_block v4, w3, x2, x6, w7
st1 {v4.16b}, [x0], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
subs w4, w4, #1
bne .Lcbcencloop
crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path CBC encryption is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC encrypt which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:52 +00:00
.Lcbcencout:
st1 {v4.16b}, [x5] /* return iv */
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_cbc_encrypt)
AES_ENTRY(aes_cbc_decrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ld1 {v7.16b}, [x5] /* get iv */
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
dec_prepare w3, x2, x6
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
.LcbcdecloopNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lcbcdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
mov v4.16b, v0.16b
mov v5.16b, v1.16b
mov v6.16b, v2.16b
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_decrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
sub x1, x1, #16
eor v0.16b, v0.16b, v7.16b
eor v1.16b, v1.16b, v4.16b
ld1 {v7.16b}, [x1], #16 /* reload 1 ct block */
eor v2.16b, v2.16b, v5.16b
eor v3.16b, v3.16b, v6.16b
st1 {v0.16b-v3.16b}, [x0], #64
b .LcbcdecloopNx
.Lcbcdec1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lcbcdecout
.Lcbcdecloop:
ld1 {v1.16b}, [x1], #16 /* get next ct block */
mov v0.16b, v1.16b /* ...and copy to v0 */
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
decrypt_block v0, w3, x2, x6, w7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v0.16b, v0.16b, v7.16b /* xor with iv => pt */
mov v7.16b, v1.16b /* ct is next iv */
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
bne .Lcbcdecloop
.Lcbcdecout:
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
st1 {v7.16b}, [x5] /* return iv */
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_cbc_decrypt)
/*
* aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
* int blocks, u8 ctr[])
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
*/
AES_ENTRY(aes_ctr_encrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
enc_prepare w3, x2, x6
ld1 {v4.16b}, [x5]
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
umov x6, v4.d[1] /* keep swabbed ctr in reg */
rev x6, x6
cmn w6, w4 /* 32 bit overflow? */
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bcs .Lctrloop
.LctrloopNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lctr1x
ldr q8, =0x30000000200000001 /* addends 1,2,3[,0] */
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
dup v7.4s, w6
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
mov v0.16b, v4.16b
add v7.4s, v7.4s, v8.4s
mov v1.16b, v4.16b
rev32 v8.16b, v7.16b
mov v2.16b, v4.16b
mov v3.16b, v4.16b
mov v1.s[3], v8.s[0]
mov v2.s[3], v8.s[1]
mov v3.s[3], v8.s[2]
ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_encrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v0.16b, v5.16b, v0.16b
ld1 {v5.16b}, [x1], #16 /* get 1 input block */
eor v1.16b, v6.16b, v1.16b
eor v2.16b, v7.16b, v2.16b
eor v3.16b, v5.16b, v3.16b
st1 {v0.16b-v3.16b}, [x0], #64
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
add x6, x6, #4
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
rev x7, x6
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ins v4.d[1], x7
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
cbz w4, .Lctrout
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
b .LctrloopNx
.Lctr1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lctrout
.Lctrloop:
mov v0.16b, v4.16b
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
encrypt_block v0, w3, x2, x8, w7
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
adds x6, x6, #1 /* increment BE ctr */
rev x7, x6
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
ins v4.d[1], x7
bcs .Lctrcarry /* overflow? */
.Lctrcarrydone:
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
subs w4, w4, #1
crypto: arm64/aes-blk - remove cra_alignmask Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-28 23:25:34 +00:00
bmi .Lctrtailblock /* blocks <0 means tail block */
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ld1 {v3.16b}, [x1], #16
eor v3.16b, v0.16b, v3.16b
st1 {v3.16b}, [x0], #16
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
bne .Lctrloop
.Lctrout:
st1 {v4.16b}, [x5] /* return next CTR value */
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
ret
crypto: arm64/aes-blk - remove cra_alignmask Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-28 23:25:34 +00:00
.Lctrtailblock:
st1 {v0.16b}, [x0]
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-17 13:46:29 +00:00
.Lctrcarry:
umov x7, v4.d[0] /* load upper word of ctr */
rev x7, x7 /* ... to handle the carry */
add x7, x7, #1
rev x7, x7
ins v4.d[0], x7
b .Lctrcarrydone
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
AES_ENDPROC(aes_ctr_encrypt)
.ltorg
/*
* aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
* int blocks, u8 const rk2[], u8 iv[], int first)
* aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
* int blocks, u8 const rk2[], u8 iv[], int first)
*/
.macro next_tweak, out, in, const, tmp
sshr \tmp\().2d, \in\().2d, #63
and \tmp\().16b, \tmp\().16b, \const\().16b
add \out\().2d, \in\().2d, \in\().2d
ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8
eor \out\().16b, \out\().16b, \tmp\().16b
.endm
.Lxts_mul_x:
crypto: arm64/aes-xts-ce: fix for big endian Emit the XTS tweak literal constants in the appropriate order for a single 128-bit scalar literal load. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-11 18:15:19 +00:00
CPU_LE( .quad 1, 0x87 )
CPU_BE( .quad 0x87, 1 )
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
AES_ENTRY(aes_xts_encrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ld1 {v4.16b}, [x6]
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
cbz w7, .Lxtsencnotfirst
enc_prepare w3, x5, x8
encrypt_block v4, w3, x5, x8, w7 /* first tweak */
enc_switch_key w3, x2, x8
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ldr q7, .Lxts_mul_x
b .LxtsencNx
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
.Lxtsencnotfirst:
enc_prepare w3, x2, x8
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
.LxtsencloopNx:
ldr q7, .Lxts_mul_x
next_tweak v4, v4, v7, v8
.LxtsencNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lxtsenc1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */
next_tweak v5, v4, v7, v8
eor v0.16b, v0.16b, v4.16b
next_tweak v6, v5, v7, v8
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
next_tweak v7, v6, v7, v8
eor v3.16b, v3.16b, v7.16b
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_encrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v3.16b, v3.16b, v7.16b
eor v0.16b, v0.16b, v4.16b
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v7.16b
cbz w4, .Lxtsencout
b .LxtsencloopNx
.Lxtsenc1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lxtsencout
.Lxtsencloop:
ld1 {v1.16b}, [x1], #16
eor v0.16b, v1.16b, v4.16b
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
encrypt_block v0, w3, x2, x8, w7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v0.16b, v0.16b, v4.16b
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
beq .Lxtsencout
next_tweak v4, v4, v7, v8
b .Lxtsencloop
.Lxtsencout:
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
st1 {v4.16b}, [x6]
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_xts_encrypt)
AES_ENTRY(aes_xts_decrypt)
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
stp x29, x30, [sp, #-16]!
mov x29, sp
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ld1 {v4.16b}, [x6]
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
cbz w7, .Lxtsdecnotfirst
enc_prepare w3, x5, x8
encrypt_block v4, w3, x5, x8, w7 /* first tweak */
dec_prepare w3, x2, x8
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ldr q7, .Lxts_mul_x
b .LxtsdecNx
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
.Lxtsdecnotfirst:
dec_prepare w3, x2, x8
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
.LxtsdecloopNx:
ldr q7, .Lxts_mul_x
next_tweak v4, v4, v7, v8
.LxtsdecNx:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
subs w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
bmi .Lxtsdec1x
ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */
next_tweak v5, v4, v7, v8
eor v0.16b, v0.16b, v4.16b
next_tweak v6, v5, v7, v8
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
next_tweak v7, v6, v7, v8
eor v3.16b, v3.16b, v7.16b
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
bl aes_decrypt_block4x
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v3.16b, v3.16b, v7.16b
eor v0.16b, v0.16b, v4.16b
eor v1.16b, v1.16b, v5.16b
eor v2.16b, v2.16b, v6.16b
st1 {v0.16b-v3.16b}, [x0], #64
mov v4.16b, v7.16b
cbz w4, .Lxtsdecout
b .LxtsdecloopNx
.Lxtsdec1x:
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
adds w4, w4, #4
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
beq .Lxtsdecout
.Lxtsdecloop:
ld1 {v1.16b}, [x1], #16
eor v0.16b, v1.16b, v4.16b
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
decrypt_block v0, w3, x2, x8, w7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
eor v0.16b, v0.16b, v4.16b
st1 {v0.16b}, [x0], #16
subs w4, w4, #1
beq .Lxtsdecout
next_tweak v4, v4, v7, v8
b .Lxtsdecloop
.Lxtsdecout:
crypto: arm64/aes-blk - move kernel mode neon en/disable into loop When kernel mode NEON was first introduced on arm64, the preserve and restore of the userland NEON state was completely unoptimized, and involved saving all registers on each call to kernel_neon_begin(), and restoring them on each call to kernel_neon_end(). For this reason, the NEON crypto code that was introduced at the time keeps the NEON enabled throughout the execution of the crypto API methods, which may include calls back into the crypto API that could result in memory allocation or other actions that we should avoid when running with preemption disabled. Since then, we have optimized the kernel mode NEON handling, which now restores lazily (upon return to userland), and so the preserve action is only costly the first time it is called after entering the kernel. So let's put the kernel_neon_begin() and kernel_neon_end() calls around the actual invocations of the NEON crypto code, and run the remainder of the code with kernel mode NEON disabled (and preemption enabled) Note that this requires some reshuffling of the registers in the asm code, because the XTS routines can no longer rely on the registers to retain their contents between invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:48 +00:00
st1 {v4.16b}, [x6]
crypto: arm64/aes-blk - remove configurable interleave The AES block mode implementation using Crypto Extensions or plain NEON was written before real hardware existed, and so its interleave factor was made build time configurable (as well as an option to instantiate all interleaved sequences inline rather than as subroutines) We ended up using INTERLEAVE=4 with inlining disabled for both flavors of the core AES routines, so let's stick with that, and remove the option to configure this at build time. This makes the code easier to modify, which is nice now that we're adding yield support. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:51 +00:00
ldp x29, x30, [sp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 09:19:17 +00:00
ret
AES_ENDPROC(aes_xts_decrypt)
crypto: arm64/aes - add NEON/Crypto Extensions CBCMAC/CMAC/XCBC driver On ARMv8 implementations that do not support the Crypto Extensions, such as the Raspberry Pi 3, the CCM driver falls back to the generic table based AES implementation to perform the MAC part of the algorithm, which is slow and not time invariant. So add a CBCMAC implementation to the shared glue code between NEON AES and Crypto Extensions AES, so that it can be used instead now that the CCM driver has been updated to look for CBCMAC implementations other than the one it supplies itself. Also, given how these algorithms mostly only differ in the way the key handling and the final encryption are implemented, expose CMAC and XCBC algorithms as well based on the same core update code. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 14:49:37 +00:00
/*
* aes_mac_update(u8 const in[], u32 const rk[], int rounds,
* int blocks, u8 dg[], int enc_before, int enc_after)
*/
AES_ENTRY(aes_mac_update)
ld1 {v0.16b}, [x4] /* get dg */
enc_prepare w2, x1, x7
crypto: arm64/aes-blk - add 4 way interleave to CBC-MAC encrypt path CBC MAC is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC MAC which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:53 +00:00
cbz w5, .Lmacloop4x
crypto: arm64/aes - add NEON/Crypto Extensions CBCMAC/CMAC/XCBC driver On ARMv8 implementations that do not support the Crypto Extensions, such as the Raspberry Pi 3, the CCM driver falls back to the generic table based AES implementation to perform the MAC part of the algorithm, which is slow and not time invariant. So add a CBCMAC implementation to the shared glue code between NEON AES and Crypto Extensions AES, so that it can be used instead now that the CCM driver has been updated to look for CBCMAC implementations other than the one it supplies itself. Also, given how these algorithms mostly only differ in the way the key handling and the final encryption are implemented, expose CMAC and XCBC algorithms as well based on the same core update code. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 14:49:37 +00:00
crypto: arm64/aes-blk - add 4 way interleave to CBC-MAC encrypt path CBC MAC is strictly sequential, and so the current AES code simply processes the input one block at a time. However, we are about to add yield support, which adds a bit of overhead, and which we prefer to align with other modes in terms of granularity (i.e., it is better to have all routines yield every 64 bytes and not have an exception for CBC MAC which yields every 16 bytes) So unroll the loop by 4. We still cannot perform the AES algorithm in parallel, but we can at least merge the loads and stores. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-10 15:21:53 +00:00
encrypt_block v0, w2, x1, x7, w8
.Lmacloop4x:
subs w3, w3, #4
bmi .Lmac1x
ld1 {v1.16b-v4.16b}, [x0], #64 /* get next pt block */
eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v2.16b
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v3.16b
encrypt_block v0, w2, x1, x7, w8
eor v0.16b, v0.16b, v4.16b
cmp w3, wzr
csinv x5, x6, xzr, eq
cbz w5, .Lmacout
encrypt_block v0, w2, x1, x7, w8
b .Lmacloop4x
.Lmac1x:
add w3, w3, #4
crypto: arm64/aes - add NEON/Crypto Extensions CBCMAC/CMAC/XCBC driver On ARMv8 implementations that do not support the Crypto Extensions, such as the Raspberry Pi 3, the CCM driver falls back to the generic table based AES implementation to perform the MAC part of the algorithm, which is slow and not time invariant. So add a CBCMAC implementation to the shared glue code between NEON AES and Crypto Extensions AES, so that it can be used instead now that the CCM driver has been updated to look for CBCMAC implementations other than the one it supplies itself. Also, given how these algorithms mostly only differ in the way the key handling and the final encryption are implemented, expose CMAC and XCBC algorithms as well based on the same core update code. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 14:49:37 +00:00
.Lmacloop:
cbz w3, .Lmacout
ld1 {v1.16b}, [x0], #16 /* get next pt block */
eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */
subs w3, w3, #1
csinv x5, x6, xzr, eq
cbz w5, .Lmacout
encrypt_block v0, w2, x1, x7, w8
b .Lmacloop
.Lmacout:
st1 {v0.16b}, [x4] /* return dg */
ret
AES_ENDPROC(aes_mac_update)
Reference in New Issue Copy Permalink