linux/drivers/fpga/Makefile

#
# Makefile for the fpga framework and fpga manager drivers.
#

# Core FPGA Manager Framework
obj-$(CONFIG_FPGA)			+= fpga-mgr.o

# FPGA Manager Drivers
obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI)	+= altera-ps-spi.o
obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o

# FPGA Bridge Drivers
obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
obj-$(CONFIG_XILINX_PR_DECOUPLER)	+= xilinx-pr-decoupler.o

# High Level Interfaces
obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-10-07 15:36:28 +00:00			`#`
			`# Makefile for the fpga framework and fpga manager drivers.`
			`#`

			`# Core FPGA Manager Framework`
			`obj-$(CONFIG_FPGA) += fpga-mgr.o`

			`# FPGA Manager Drivers`
fpga manager: Add Altera CvP driver Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-06-14 15:36:35 +00:00			`obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o`
fpga manager: Add altera-ps-spi driver for Altera FPGAs altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-06-14 15:36:29 +00:00			`obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o`
fpga: Add support for Lattice iCE40 FPGAs This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-02-27 22:14:26 +00:00			`obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o`
fpga manager: add driver for socfpga fpga manager Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-10-07 15:36:29 +00:00			`obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o`
fpga-manager: Add Socfpga Arria10 support Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-11-01 19:14:32 +00:00			`obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o`
FPGA: Add TS-7300 FPGA manager Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-02-27 22:14:22 +00:00			`obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o`
fpga manager: Add Xilinx slave serial SPI driver The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-03-24 00:34:26 +00:00			`obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o`
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-10-16 22:42:30 +00:00			`obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o`
fpga pr ip: Core driver support for Altera Partial Reconfiguration IP. Adding the core functions necessary for a fpga-mgr driver for the Altera Partial IP component. It is intended for these functions to be used by the various bus implementations like the platform bus or the PCIe bus. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-03-24 00:34:28 +00:00			`obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o`
fpga pr ip: Platform driver for Altera Partial Reconfiguration IP. This adds a platform bus driver for a fpga-mgr driver that uses the Altera Partial Reconfiguration IP component. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-03-24 00:34:30 +00:00			`obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o`
fpga: add fpga bridge framework This framework adds API functions for enabling/ disabling FPGA bridges under kernel control. This allows the Linux kernel to disable FPGA bridges during FPGA reprogramming and to enable FPGA bridges when FPGA reprogramming is done. This framework is be manufacturer-agnostic, allowing it to be used in interfaces that use the FPGA Manager Framework to reprogram FPGA's. The functions are: * of_fpga_bridge_get * fpga_bridge_put Get/put an exclusive reference to a FPGA bridge. * fpga_bridge_enable * fpga_bridge_disable Enable/Disable traffic through a bridge. * fpga_bridge_register * fpga_bridge_unregister Register/unregister a device-specific low level FPGA Bridge driver. Get an exclusive reference to a bridge and add it to a list: * fpga_bridge_get_to_list To enable/disable/put a set of bridges that are on a list: * fpga_bridges_enable * fpga_bridges_disable * fpga_bridges_put Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-11-01 19:14:28 +00:00
			`# FPGA Bridge Drivers`
			`obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o`
ARM: socfpga: fpga bridge driver support Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-11-01 19:14:30 +00:00			`obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o`
fpga: add altera freeze bridge support Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-11-01 19:14:31 +00:00			`obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o`
fpga: Add support for Xilinx LogiCORE PR Decoupler This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-03-24 15:33:21 +00:00			`obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o`
fpga: fpga-region: device tree control for FPGA FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-11-01 19:14:29 +00:00
			`# High Level Interfaces`
			`obj-$(CONFIG_FPGA_REGION) += fpga-region.o`