linux/drivers/scsi/qla2xxx/qla_os.c

6768 lines
183 KiB
C
Raw Normal View History

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/kobject.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/blk-mq-pci.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#include "qla_target.h"
/*
* Driver version
*/
char qla2x00_version_str[40];
static int apidev_major;
/*
* SRB allocation cache
*/
struct kmem_cache *srb_cachep;
/*
* CT6 CTX allocation cache
*/
static struct kmem_cache *ctx_cachep;
/*
* error level for logging
*/
int ql_errlev = ql_log_all;
static int ql2xenableclass2;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xenableclass2,
"Specify if Class 2 operations are supported from the very "
"beginning. Default is 0 - class 2 not supported.");
int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO);
MODULE_PARM_DESC(ql2xlogintimeout,
"Login timeout value in seconds.");
int qlport_down_retry;
module_param(qlport_down_retry, int, S_IRUGO);
MODULE_PARM_DESC(qlport_down_retry,
"Maximum number of command retries to a port that returns "
"a PORT-DOWN status.");
int ql2xplogiabsentdevice;
module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xplogiabsentdevice,
"Option to enable PLOGI to devices that are not present after "
"a Fabric scan. This is needed for several broken switches. "
"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
int ql2xloginretrycount = 0;
module_param(ql2xloginretrycount, int, S_IRUGO);
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
int ql2xallocfwdump = 1;
module_param(ql2xallocfwdump, int, S_IRUGO);
MODULE_PARM_DESC(ql2xallocfwdump,
"Option to enable allocation of memory for a firmware dump "
"during HBA initialization. Memory allocation requirements "
"vary by ISP type. Default is 1 - allocate memory.");
int ql2xextended_error_logging;
module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
module_param_named(logging, ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xextended_error_logging,
"Option to enable extended error logging,\n"
"\t\tDefault is 0 - no logging. 0x40000000 - Module Init & Probe.\n"
"\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n"
"\t\t0x08000000 - IO tracing. 0x04000000 - DPC Thread.\n"
"\t\t0x02000000 - Async events. 0x01000000 - Timer routines.\n"
"\t\t0x00800000 - User space. 0x00400000 - Task Management.\n"
"\t\t0x00200000 - AER/EEH. 0x00100000 - Multi Q.\n"
"\t\t0x00080000 - P3P Specific. 0x00040000 - Virtual Port.\n"
"\t\t0x00020000 - Buffer Dump. 0x00010000 - Misc.\n"
"\t\t0x00008000 - Verbose. 0x00004000 - Target.\n"
"\t\t0x00002000 - Target Mgmt. 0x00001000 - Target TMF.\n"
"\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
"\t\t0x1e400000 - Preferred value for capturing essential "
"debug information (equivalent to old "
"ql2xextended_error_logging=1).\n"
"\t\tDo LOGICAL OR of the value to enable more than one level");
int ql2xshiftctondsd = 6;
module_param(ql2xshiftctondsd, int, S_IRUGO);
MODULE_PARM_DESC(ql2xshiftctondsd,
"Set to control shifting of command type processing "
"based on total number of SG elements.");
int ql2xfdmienable=1;
module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfdmienable,
"Enables FDMI registrations. "
"0 - no FDMI. Default is 1 - perform FDMI.");
#define MAX_Q_DEPTH 64
static int ql2xmaxqdepth = MAX_Q_DEPTH;
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to set for each LUN. "
"Default is 64.");
#if (IS_ENABLED(CONFIG_NVME_FC))
int ql2xenabledif;
#else
int ql2xenabledif = 2;
#endif
module_param(ql2xenabledif, int, S_IRUGO);
MODULE_PARM_DESC(ql2xenabledif,
" Enable T10-CRC-DIF:\n"
" Default is 2.\n"
" 0 -- No DIF Support\n"
" 1 -- Enable DIF for all types\n"
" 2 -- Enable DIF for all types, except Type 0.\n");
#if (IS_ENABLED(CONFIG_NVME_FC))
int ql2xnvmeenable = 1;
#else
int ql2xnvmeenable;
#endif
module_param(ql2xnvmeenable, int, 0644);
MODULE_PARM_DESC(ql2xnvmeenable,
"Enables NVME support. "
"0 - no NVMe. Default is Y");
int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
" Enable T10-CRC-DIF Error isolation by HBA:\n"
" Default is 2.\n"
" 0 -- Error isolation disabled\n"
" 1 -- Error isolation enabled only for DIX Type 0\n"
" 2 -- Error isolation enabled for all Types\n");
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xiidmaenable,
"Enables iIDMA settings "
"Default is 1 - perform iIDMA. 0 - no iIDMA.");
int ql2xmqsupport = 1;
module_param(ql2xmqsupport, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmqsupport,
"Enable on demand multiple queue pairs support "
"Default is 1 for supported. "
"Set it to 0 to turn off mq qpair support.");
int ql2xfwloadbin;
module_param(ql2xfwloadbin, int, S_IRUGO|S_IWUSR);
module_param_named(fwload, ql2xfwloadbin, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfwloadbin,
"Option to specify location from which to load ISP firmware:.\n"
" 2 -- load firmware via the request_firmware() (hotplug).\n"
" interface.\n"
" 1 -- load firmware from flash.\n"
" 0 -- use default semantics.\n");
int ql2xetsenable;
module_param(ql2xetsenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xetsenable,
"Enables firmware ETS burst."
"Default is 0 - skip ETS enablement.");
int ql2xdbwr = 1;
module_param(ql2xdbwr, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdbwr,
"Option to specify scheme for request queue posting.\n"
" 0 -- Regular doorbell.\n"
" 1 -- CAMRAM doorbell (faster).\n");
int ql2xtargetreset = 1;
module_param(ql2xtargetreset, int, S_IRUGO);
MODULE_PARM_DESC(ql2xtargetreset,
"Enable target reset."
"Default is 1 - use hw defaults.");
int ql2xgffidenable;
module_param(ql2xgffidenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xgffidenable,
"Enables GFF_ID checks of port type. "
"Default is 0 - Do not use GFF_ID information.");
int ql2xasynctmfenable = 1;
module_param(ql2xasynctmfenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xasynctmfenable,
"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
int ql2xdontresethba;
module_param(ql2xdontresethba, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdontresethba,
"Option to specify reset behaviour.\n"
" 0 (Default) -- Reset on failure.\n"
" 1 -- Do not reset on failure.\n");
uint64_t ql2xmaxlun = MAX_LUNS;
module_param(ql2xmaxlun, ullong, S_IRUGO);
MODULE_PARM_DESC(ql2xmaxlun,
"Defines the maximum LU number to register with the SCSI "
"midlayer. Default is 65535.");
int ql2xmdcapmask = 0x1F;
module_param(ql2xmdcapmask, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdcapmask,
"Set the Minidump driver capture mask level. "
"Default is 0x1F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
int ql2xmdenable = 1;
module_param(ql2xmdenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdenable,
"Enable/disable MiniDump. "
"0 - MiniDump disabled. "
"1 (Default) - MiniDump enabled.");
int ql2xexlogins = 0;
module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xexlogins,
"Number of extended Logins. "
"0 (Default)- Disabled.");
int ql2xexchoffld = 1024;
module_param(ql2xexchoffld, uint, 0644);
MODULE_PARM_DESC(ql2xexchoffld,
"Number of target exchanges.");
int ql2xiniexchg = 1024;
module_param(ql2xiniexchg, uint, 0644);
MODULE_PARM_DESC(ql2xiniexchg,
"Number of initiator exchanges.");
int ql2xfwholdabts = 0;
module_param(ql2xfwholdabts, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfwholdabts,
"Allow FW to hold status IOCB until ABTS rsp received. "
"0 (Default) Do not set fw option. "
"1 - Set fw option to hold ABTS.");
int ql2xmvasynctoatio = 1;
module_param(ql2xmvasynctoatio, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmvasynctoatio,
"Move PUREX, ABTS RX and RIDA IOCBs to ATIOQ"
"0 (Default). Do not move IOCBs"
"1 - Move IOCBs.");
int ql2xautodetectsfp = 1;
module_param(ql2xautodetectsfp, int, 0444);
MODULE_PARM_DESC(ql2xautodetectsfp,
"Detect SFP range and set appropriate distance.\n"
"1 (Default): Enable\n");
int ql2xenablemsix = 1;
module_param(ql2xenablemsix, int, 0444);
MODULE_PARM_DESC(ql2xenablemsix,
"Set to enable MSI or MSI-X interrupt mechanism.\n"
" Default is 1, enable MSI-X interrupt mechanism.\n"
" 0 -- enable traditional pin-based mechanism.\n"
" 1 -- enable MSI-X interrupt mechanism.\n"
" 2 -- enable MSI interrupt mechanism.\n");
/*
* SCSI host template entry points
*/
static int qla2xxx_slave_configure(struct scsi_device * device);
static int qla2xxx_slave_alloc(struct scsi_device *);
static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
static void qla2xxx_scan_start(struct Scsi_Host *);
static void qla2xxx_slave_destroy(struct scsi_device *);
static int qla2xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int qla2xxx_eh_abort(struct scsi_cmnd *);
static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
static void qla2x00_clear_drv_active(struct qla_hw_data *);
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla83xx_disable_laser(scsi_qla_host_t *vha);
static int qla2xxx_map_queues(struct Scsi_Host *shost);
static void qla2x00_destroy_deferred_work(struct qla_hw_data *);
struct scsi_host_template qla2xxx_driver_template = {
.module = THIS_MODULE,
.name = QLA2XXX_DRIVER_NAME,
.queuecommand = qla2xxx_queuecommand,
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = qla2xxx_eh_abort,
.eh_device_reset_handler = qla2xxx_eh_device_reset,
.eh_target_reset_handler = qla2xxx_eh_target_reset,
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
.eh_host_reset_handler = qla2xxx_eh_host_reset,
.slave_configure = qla2xxx_slave_configure,
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
.scan_finished = qla2xxx_scan_finished,
.scan_start = qla2xxx_scan_start,
.change_queue_depth = scsi_change_queue_depth,
.map_queues = qla2xxx_map_queues,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.shost_attrs = qla2x00_host_attrs,
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
.supported_mode = MODE_INITIATOR,
.track_queue_depth = 1,
};
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
/* TODO Convert to inlines
*
* Timer routines
*/
__inline__ void
qla2x00_start_timer(scsi_qla_host_t *vha, void *func, unsigned long interval)
{
init_timer(&vha->timer);
vha->timer.expires = jiffies + interval * HZ;
vha->timer.data = (unsigned long)vha;
vha->timer.function = (void (*)(unsigned long))func;
add_timer(&vha->timer);
vha->timer_active = 1;
}
static inline void
qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval)
{
/* Currently used for 82XX only. */
if (vha->device_flags & DFLG_DEV_FAILED) {
ql_dbg(ql_dbg_timer, vha, 0x600d,
"Device in a failed state, returning.\n");
return;
}
mod_timer(&vha->timer, jiffies + interval * HZ);
}
static __inline__ void
qla2x00_stop_timer(scsi_qla_host_t *vha)
{
del_timer_sync(&vha->timer);
vha->timer_active = 0;
}
static int qla2x00_do_dpc(void *data);
static void qla2x00_rst_aen(scsi_qla_host_t *);
static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t,
struct req_que **, struct rsp_que **);
static void qla2x00_free_fw_dump(struct qla_hw_data *);
static void qla2x00_mem_free(struct qla_hw_data *);
int qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd,
struct qla_qpair *qpair);
/* -------------------------------------------------------------------------- */
static void qla_init_base_qpair(struct scsi_qla_host *vha, struct req_que *req,
struct rsp_que *rsp)
{
struct qla_hw_data *ha = vha->hw;
rsp->qpair = ha->base_qpair;
rsp->req = req;
ha->base_qpair->req = req;
ha->base_qpair->rsp = rsp;
ha->base_qpair->vha = vha;
ha->base_qpair->qp_lock_ptr = &ha->hardware_lock;
ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q];
INIT_LIST_HEAD(&ha->base_qpair->hints_list);
INIT_LIST_HEAD(&ha->base_qpair->nvme_done_list);
ha->base_qpair->enable_class_2 = ql2xenableclass2;
/* init qpair to this cpu. Will adjust at run time. */
qla_cpu_update(rsp->qpair, smp_processor_id());
ha->base_qpair->pdev = ha->pdev;
if (IS_QLA27XX(ha) || IS_QLA83XX(ha))
ha->base_qpair->reqq_start_iocbs = qla_83xx_start_iocbs;
}
static int qla2x00_alloc_queues(struct qla_hw_data *ha, struct req_que *req,
struct rsp_que *rsp)
{
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
GFP_KERNEL);
if (!ha->req_q_map) {
ql_log(ql_log_fatal, vha, 0x003b,
"Unable to allocate memory for request queue ptrs.\n");
goto fail_req_map;
}
ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
GFP_KERNEL);
if (!ha->rsp_q_map) {
ql_log(ql_log_fatal, vha, 0x003c,
"Unable to allocate memory for response queue ptrs.\n");
goto fail_rsp_map;
}
ha->base_qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL);
if (ha->base_qpair == NULL) {
ql_log(ql_log_warn, vha, 0x00e0,
"Failed to allocate base queue pair memory.\n");
goto fail_base_qpair;
}
qla_init_base_qpair(vha, req, rsp);
if (ql2xmqsupport && ha->max_qpairs) {
ha->queue_pair_map = kcalloc(ha->max_qpairs, sizeof(struct qla_qpair *),
GFP_KERNEL);
if (!ha->queue_pair_map) {
ql_log(ql_log_fatal, vha, 0x0180,
"Unable to allocate memory for queue pair ptrs.\n");
goto fail_qpair_map;
}
}
/*
* Make sure we record at least the request and response queue zero in
* case we need to free them if part of the probe fails.
*/
ha->rsp_q_map[0] = rsp;
ha->req_q_map[0] = req;
set_bit(0, ha->rsp_qid_map);
set_bit(0, ha->req_qid_map);
return 1;
fail_qpair_map:
kfree(ha->base_qpair);
ha->base_qpair = NULL;
fail_base_qpair:
kfree(ha->rsp_q_map);
ha->rsp_q_map = NULL;
fail_rsp_map:
kfree(ha->req_q_map);
ha->req_q_map = NULL;
fail_req_map:
return -ENOMEM;
}
static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
{
if (IS_QLAFX00(ha)) {
if (req && req->ring_fx00)
dma_free_coherent(&ha->pdev->dev,
(req->length_fx00 + 1) * sizeof(request_t),
req->ring_fx00, req->dma_fx00);
} else if (req && req->ring)
dma_free_coherent(&ha->pdev->dev,
(req->length + 1) * sizeof(request_t),
req->ring, req->dma);
if (req)
kfree(req->outstanding_cmds);
kfree(req);
}
static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
{
if (IS_QLAFX00(ha)) {
if (rsp && rsp->ring)
dma_free_coherent(&ha->pdev->dev,
(rsp->length_fx00 + 1) * sizeof(request_t),
rsp->ring_fx00, rsp->dma_fx00);
} else if (rsp && rsp->ring) {
dma_free_coherent(&ha->pdev->dev,
(rsp->length + 1) * sizeof(response_t),
rsp->ring, rsp->dma);
}
kfree(rsp);
}
static void qla2x00_free_queues(struct qla_hw_data *ha)
{
struct req_que *req;
struct rsp_que *rsp;
int cnt;
unsigned long flags;
if (ha->queue_pair_map) {
kfree(ha->queue_pair_map);
ha->queue_pair_map = NULL;
}
if (ha->base_qpair) {
kfree(ha->base_qpair);
ha->base_qpair = NULL;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
if (!test_bit(cnt, ha->req_qid_map))
continue;
req = ha->req_q_map[cnt];
clear_bit(cnt, ha->req_qid_map);
ha->req_q_map[cnt] = NULL;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
qla2x00_free_req_que(ha, req);
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
kfree(ha->req_q_map);
ha->req_q_map = NULL;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
if (!test_bit(cnt, ha->rsp_qid_map))
continue;
rsp = ha->rsp_q_map[cnt];
clear_bit(cnt, ha->rsp_qid_map);
ha->rsp_q_map[cnt] = NULL;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
qla2x00_free_rsp_que(ha, rsp);
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
kfree(ha->rsp_q_map);
ha->rsp_q_map = NULL;
}
static char *
qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str)
{
struct qla_hw_data *ha = vha->hw;
static char *pci_bus_modes[] = {
"33", "66", "100", "133",
};
uint16_t pci_bus;
strcpy(str, "PCI");
pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
if (pci_bus) {
strcat(str, "-X (");
strcat(str, pci_bus_modes[pci_bus]);
} else {
pci_bus = (ha->pci_attr & BIT_8) >> 8;
strcat(str, " (");
strcat(str, pci_bus_modes[pci_bus]);
}
strcat(str, " MHz)");
return (str);
}
static char *
qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
{
static char *pci_bus_modes[] = { "33", "66", "100", "133", };
struct qla_hw_data *ha = vha->hw;
uint32_t pci_bus;
if (pci_is_pcie(ha->pdev)) {
char lwstr[6];
uint32_t lstat, lspeed, lwidth;
pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
lspeed = lstat & PCI_EXP_LNKCAP_SLS;
lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
strcpy(str, "PCIe (");
switch (lspeed) {
case 1:
strcat(str, "2.5GT/s ");
break;
case 2:
strcat(str, "5.0GT/s ");
break;
case 3:
strcat(str, "8.0GT/s ");
break;
default:
strcat(str, "<unknown> ");
break;
}
snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
strcat(str, lwstr);
return str;
}
strcpy(str, "PCI");
pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
if (pci_bus == 0 || pci_bus == 8) {
strcat(str, " (");
strcat(str, pci_bus_modes[pci_bus >> 3]);
} else {
strcat(str, "-X ");
if (pci_bus & BIT_2)
strcat(str, "Mode 2");
else
strcat(str, "Mode 1");
strcat(str, " (");
strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
}
strcat(str, " MHz)");
return str;
}
static char *
qla2x00_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size)
{
char un_str[10];
struct qla_hw_data *ha = vha->hw;
snprintf(str, size, "%d.%02d.%02d ", ha->fw_major_version,
ha->fw_minor_version, ha->fw_subminor_version);
if (ha->fw_attributes & BIT_9) {
strcat(str, "FLX");
return (str);
}
switch (ha->fw_attributes & 0xFF) {
case 0x7:
strcat(str, "EF");
break;
case 0x17:
strcat(str, "TP");
break;
case 0x37:
strcat(str, "IP");
break;
case 0x77:
strcat(str, "VI");
break;
default:
sprintf(un_str, "(%x)", ha->fw_attributes);
strcat(str, un_str);
break;
}
if (ha->fw_attributes & 0x100)
strcat(str, "X");
return (str);
}
static char *
qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size)
{
struct qla_hw_data *ha = vha->hw;
snprintf(str, size, "%d.%02d.%02d (%x)", ha->fw_major_version,
ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes);
return str;
}
void
qla2x00_sp_free_dma(void *ptr)
{
srb_t *sp = ptr;
struct qla_hw_data *ha = sp->vha->hw;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
void *ctx = GET_CMD_CTX_SP(sp);
if (sp->flags & SRB_DMA_VALID) {
scsi_dma_unmap(cmd);
sp->flags &= ~SRB_DMA_VALID;
}
if (sp->flags & SRB_CRC_PROT_DMA_VALID) {
dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
scsi_prot_sg_count(cmd), cmd->sc_data_direction);
sp->flags &= ~SRB_CRC_PROT_DMA_VALID;
}
if (!ctx)
goto end;
if (sp->flags & SRB_CRC_CTX_DSD_VALID) {
/* List assured to be having elements */
qla2x00_clean_dsd_pool(ha, ctx);
sp->flags &= ~SRB_CRC_CTX_DSD_VALID;
}
if (sp->flags & SRB_CRC_CTX_DMA_VALID) {
struct crc_context *ctx0 = ctx;
dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma);
sp->flags &= ~SRB_CRC_CTX_DMA_VALID;
}
if (sp->flags & SRB_FCP_CMND_DMA_VALID) {
struct ct6_dsd *ctx1 = ctx;
dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd,
ctx1->fcp_cmnd_dma);
list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list);
ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt;
ha->gbl_dsd_avail += ctx1->dsd_use_cnt;
mempool_free(ctx1, ha->ctx_mempool);
}
end:
if (sp->type != SRB_NVME_CMD && sp->type != SRB_NVME_LS) {
CMD_SP(cmd) = NULL;
qla2x00_rel_sp(sp);
}
}
void
qla2x00_sp_compl(void *ptr, int res)
{
srb_t *sp = ptr;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
cmd->result = res;
if (atomic_read(&sp->ref_count) == 0) {
ql_dbg(ql_dbg_io, sp->vha, 0x3015,
"SP reference-count to ZERO -- sp=%p cmd=%p.\n",
sp, GET_CMD_SP(sp));
if (ql2xextended_error_logging & ql_dbg_io)
WARN_ON(atomic_read(&sp->ref_count) == 0);
return;
}
if (!atomic_dec_and_test(&sp->ref_count))
return;
sp->free(sp);
cmd->scsi_done(cmd);
}
void
qla2xxx_qpair_sp_free_dma(void *ptr)
{
srb_t *sp = (srb_t *)ptr;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct qla_hw_data *ha = sp->fcport->vha->hw;
void *ctx = GET_CMD_CTX_SP(sp);
if (sp->flags & SRB_DMA_VALID) {
scsi_dma_unmap(cmd);
sp->flags &= ~SRB_DMA_VALID;
}
if (sp->flags & SRB_CRC_PROT_DMA_VALID) {
dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
scsi_prot_sg_count(cmd), cmd->sc_data_direction);
sp->flags &= ~SRB_CRC_PROT_DMA_VALID;
}
if (!ctx)
goto end;
if (sp->flags & SRB_CRC_CTX_DSD_VALID) {
/* List assured to be having elements */
qla2x00_clean_dsd_pool(ha, ctx);
sp->flags &= ~SRB_CRC_CTX_DSD_VALID;
}
if (sp->flags & SRB_CRC_CTX_DMA_VALID) {
struct crc_context *ctx0 = ctx;
dma_pool_free(ha->dl_dma_pool, ctx, ctx0->crc_ctx_dma);
sp->flags &= ~SRB_CRC_CTX_DMA_VALID;
}
if (sp->flags & SRB_FCP_CMND_DMA_VALID) {
struct ct6_dsd *ctx1 = ctx;
dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd,
ctx1->fcp_cmnd_dma);
list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list);
ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt;
ha->gbl_dsd_avail += ctx1->dsd_use_cnt;
mempool_free(ctx1, ha->ctx_mempool);
}
end:
CMD_SP(cmd) = NULL;
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
void
qla2xxx_qpair_sp_compl(void *ptr, int res)
{
srb_t *sp = ptr;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
cmd->result = res;
if (atomic_read(&sp->ref_count) == 0) {
ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3079,
"SP reference-count to ZERO -- sp=%p cmd=%p.\n",
sp, GET_CMD_SP(sp));
if (ql2xextended_error_logging & ql_dbg_io)
WARN_ON(atomic_read(&sp->ref_count) == 0);
return;
}
if (!atomic_dec_and_test(&sp->ref_count))
return;
sp->free(sp);
cmd->scsi_done(cmd);
}
/* If we are SP1 here, we need to still take and release the host_lock as SP1
* does not have the changes necessary to avoid taking host->host_lock.
*/
static int
qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-18 16:03:35 +00:00
struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
srb_t *sp;
int rval;
struct qla_qpair *qpair = NULL;
uint32_t tag;
uint16_t hwq;
if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) {
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
if (ha->mqenable) {
if (shost_use_blk_mq(vha->host)) {
tag = blk_mq_unique_tag(cmd->request);
hwq = blk_mq_unique_tag_to_hwq(tag);
qpair = ha->queue_pair_map[hwq];
} else if (vha->vp_idx && vha->qpair) {
qpair = vha->qpair;
}
if (qpair)
return qla2xxx_mqueuecommand(host, cmd, qpair);
}
if (ha->flags.eeh_busy) {
if (ha->flags.pci_channel_io_perm_failure) {
ql_dbg(ql_dbg_aer, vha, 0x9010,
"PCI Channel IO permanent failure, exiting "
"cmd=%p.\n", cmd);
cmd->result = DID_NO_CONNECT << 16;
} else {
ql_dbg(ql_dbg_aer, vha, 0x9011,
"EEH_Busy, Requeuing the cmd=%p.\n", cmd);
cmd->result = DID_REQUEUE << 16;
}
goto qc24_fail_command;
}
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-18 16:03:35 +00:00
rval = fc_remote_port_chkready(rport);
if (rval) {
cmd->result = rval;
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3003,
"fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n",
cmd, rval);
goto qc24_fail_command;
}
if (!vha->flags.difdix_supported &&
scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
ql_dbg(ql_dbg_io, vha, 0x3004,
"DIF Cap not reg, fail DIF capable cmd's:%p.\n",
cmd);
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
if (!fcport) {
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
ql_dbg(ql_dbg_io, vha, 0x3005,
"Returning DNC, fcport_state=%d loop_state=%d.\n",
atomic_read(&fcport->state),
atomic_read(&base_vha->loop_state));
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
goto qc24_target_busy;
}
/*
* Return target busy if we've received a non-zero retry_delay_timer
* in a FCP_RSP.
*/
if (fcport->retry_delay_timestamp == 0) {
/* retry delay not set */
} else if (time_after(jiffies, fcport->retry_delay_timestamp))
fcport->retry_delay_timestamp = 0;
else
goto qc24_target_busy;
sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
if (!sp)
goto qc24_host_busy;
sp->u.scmd.cmd = cmd;
sp->type = SRB_SCSI_CMD;
atomic_set(&sp->ref_count, 1);
CMD_SP(cmd) = (void *)sp;
sp->free = qla2x00_sp_free_dma;
sp->done = qla2x00_sp_compl;
rval = ha->isp_ops->start_scsi(sp);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
"Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
goto qc24_host_busy_free_sp;
}
return 0;
qc24_host_busy_free_sp:
sp->free(sp);
qc24_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
qc24_target_busy:
return SCSI_MLQUEUE_TARGET_BUSY;
qc24_fail_command:
cmd->scsi_done(cmd);
return 0;
}
/* For MQ supported I/O */
int
qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd,
struct qla_qpair *qpair)
{
scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
srb_t *sp;
int rval;
rval = fc_remote_port_chkready(rport);
if (rval) {
cmd->result = rval;
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3076,
"fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n",
cmd, rval);
goto qc24_fail_command;
}
if (!fcport) {
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
ql_dbg(ql_dbg_io, vha, 0x3077,
"Returning DNC, fcport_state=%d loop_state=%d.\n",
atomic_read(&fcport->state),
atomic_read(&base_vha->loop_state));
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
goto qc24_target_busy;
}
/*
* Return target busy if we've received a non-zero retry_delay_timer
* in a FCP_RSP.
*/
if (fcport->retry_delay_timestamp == 0) {
/* retry delay not set */
} else if (time_after(jiffies, fcport->retry_delay_timestamp))
fcport->retry_delay_timestamp = 0;
else
goto qc24_target_busy;
sp = qla2xxx_get_qpair_sp(qpair, fcport, GFP_ATOMIC);
if (!sp)
goto qc24_host_busy;
sp->u.scmd.cmd = cmd;
sp->type = SRB_SCSI_CMD;
atomic_set(&sp->ref_count, 1);
CMD_SP(cmd) = (void *)sp;
sp->free = qla2xxx_qpair_sp_free_dma;
sp->done = qla2xxx_qpair_sp_compl;
sp->qpair = qpair;
rval = ha->isp_ops->start_scsi_mq(sp);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3078,
"Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
if (rval == QLA_INTERFACE_ERROR)
goto qc24_fail_command;
goto qc24_host_busy_free_sp;
}
return 0;
qc24_host_busy_free_sp:
sp->free(sp);
qc24_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
qc24_target_busy:
return SCSI_MLQUEUE_TARGET_BUSY;
qc24_fail_command:
cmd->scsi_done(cmd);
return 0;
}
/*
* qla2x00_eh_wait_on_command
* Waits for the command to be returned by the Firmware for some
* max time.
*
* Input:
* cmd = Scsi Command to wait on.
*
* Return:
* Not Found : 0
* Found : 1
*/
static int
qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
{
#define ABORT_POLLING_PERIOD 1000
#define ABORT_WAIT_ITER ((2 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
struct qla_hw_data *ha = vha->hw;
int ret = QLA_SUCCESS;
if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
ql_dbg(ql_dbg_taskm, vha, 0x8005,
"Return:eh_wait.\n");
return ret;
}
while (CMD_SP(cmd) && wait_iter--) {
msleep(ABORT_POLLING_PERIOD);
}
if (CMD_SP(cmd))
ret = QLA_FUNCTION_FAILED;
return ret;
}
/*
* qla2x00_wait_for_hba_online
* Wait till the HBA is online after going through
* <= MAX_RETRIES_OF_ISP_ABORT or
* finally HBA is disabled ie marked offline
*
* Input:
* ha - pointer to host adapter structure
*
* Note:
* Does context switching-Release SPIN_LOCK
* (if any) before calling this routine.
*
* Return:
* Success (Adapter is online) : 0
* Failed (Adapter is offline/disabled) : 1
*/
int
qla2x00_wait_for_hba_online(scsi_qla_host_t *vha)
{
int return_status;
unsigned long wait_online;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
ha->dpc_active) && time_before(jiffies, wait_online)) {
msleep(1000);
}
if (base_vha->flags.online)
return_status = QLA_SUCCESS;
else
return_status = QLA_FUNCTION_FAILED;
return (return_status);
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
static inline int test_fcport_count(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
int res;
spin_lock_irqsave(&ha->tgt.sess_lock, flags);
ql_dbg(ql_dbg_init, vha, 0x00ec,
"tgt %p, fcport_count=%d\n",
vha, vha->fcport_count);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
res = (vha->fcport_count == 0);
spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
return res;
}
/*
* qla2x00_wait_for_sess_deletion can only be called from remove_one.
* it has dependency on UNLOADING flag to stop device discovery
*/
static void
qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha)
{
qla2x00_mark_all_devices_lost(vha, 0);
wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
}
/*
* qla2x00_wait_for_hba_ready
* Wait till the HBA is ready before doing driver unload
*
* Input:
* ha - pointer to host adapter structure
*
* Note:
* Does context switching-Release SPIN_LOCK
* (if any) before calling this routine.
*
*/
static void
qla2x00_wait_for_hba_ready(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
while ((qla2x00_reset_active(vha) || ha->dpc_active ||
ha->flags.mbox_busy) ||
test_bit(FX00_RESET_RECOVERY, &vha->dpc_flags) ||
test_bit(FX00_TARGET_SCAN, &vha->dpc_flags)) {
if (test_bit(UNLOADING, &base_vha->dpc_flags))
break;
msleep(1000);
}
}
int
qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
{
int return_status;
unsigned long wait_reset;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ);
while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
ha->dpc_active) && time_before(jiffies, wait_reset)) {
msleep(1000);
if (!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
ha->flags.chip_reset_done)
break;
}
if (ha->flags.chip_reset_done)
return_status = QLA_SUCCESS;
else
return_status = QLA_FUNCTION_FAILED;
return return_status;
}
static void
sp_get(struct srb *sp)
{
atomic_inc(&sp->ref_count);
}
#define ISP_REG_DISCONNECT 0xffffffffU
/**************************************************************************
* qla2x00_isp_reg_stat
*
* Description:
* Read the host status register of ISP before aborting the command.
*
* Input:
* ha = pointer to host adapter structure.
*
*
* Returns:
* Either true or false.
*
* Note: Return true if there is register disconnect.
**************************************************************************/
static inline
uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
{
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
if (IS_P3P_TYPE(ha))
return ((RD_REG_DWORD(&reg82->host_int)) == ISP_REG_DISCONNECT);
else
return ((RD_REG_DWORD(&reg->host_status)) ==
ISP_REG_DISCONNECT);
}
/**************************************************************************
* qla2xxx_eh_abort
*
* Description:
* The abort function will abort the specified command.
*
* Input:
* cmd = Linux SCSI command packet to be aborted.
*
* Returns:
* Either SUCCESS or FAILED.
*
* Note:
* Only return FAILED if command not returned by firmware.
**************************************************************************/
static int
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
srb_t *sp;
int ret;
unsigned int id;
uint64_t lun;
unsigned long flags;
int rval, wait = 0;
struct qla_hw_data *ha = vha->hw;
if (qla2x00_isp_reg_stat(ha)) {
ql_log(ql_log_info, vha, 0x8042,
"PCI/Register disconnect, exiting.\n");
return FAILED;
}
if (!CMD_SP(cmd))
return SUCCESS;
ret = fc_block_scsi_eh(cmd);
if (ret != 0)
return ret;
ret = SUCCESS;
id = cmd->device->id;
lun = cmd->device->lun;
spin_lock_irqsave(&ha->hardware_lock, flags);
sp = (srb_t *) CMD_SP(cmd);
if (!sp) {
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return SUCCESS;
}
ql_dbg(ql_dbg_taskm, vha, 0x8002,
"Aborting from RISC nexus=%ld:%d:%llu sp=%p cmd=%p handle=%x\n",
vha->host_no, id, lun, sp, cmd, sp->handle);
/* Get a reference to the sp and drop the lock.*/
sp_get(sp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
rval = ha->isp_ops->abort_command(sp);
if (rval) {
if (rval == QLA_FUNCTION_PARAMETER_ERROR)
ret = SUCCESS;
else
ret = FAILED;
ql_dbg(ql_dbg_taskm, vha, 0x8003,
"Abort command mbx failed cmd=%p, rval=%x.\n", cmd, rval);
} else {
ql_dbg(ql_dbg_taskm, vha, 0x8004,
"Abort command mbx success cmd=%p.\n", cmd);
wait = 1;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
sp->done(sp, 0);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Did the command return during mailbox execution? */
if (ret == FAILED && !CMD_SP(cmd))
ret = SUCCESS;
/* Wait for the command to be returned. */
if (wait) {
if (qla2x00_eh_wait_on_command(cmd) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x8006,
"Abort handler timed out cmd=%p.\n", cmd);
ret = FAILED;
}
}
ql_log(ql_log_info, vha, 0x801c,
"Abort command issued nexus=%ld:%d:%llu -- %d %x.\n",
vha->host_no, id, lun, wait, ret);
return ret;
}
int
qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
uint64_t l, enum nexus_wait_type type)
{
int cnt, match, status;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
srb_t *sp;
struct scsi_cmnd *cmd;
status = QLA_SUCCESS;
spin_lock_irqsave(&ha->hardware_lock, flags);
req = vha->req;
for (cnt = 1; status == QLA_SUCCESS &&
cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (!sp)
continue;
if (sp->type != SRB_SCSI_CMD)
continue;
if (vha->vp_idx != sp->vha->vp_idx)
continue;
match = 0;
cmd = GET_CMD_SP(sp);
switch (type) {
case WAIT_HOST:
match = 1;
break;
case WAIT_TARGET:
match = cmd->device->id == t;
break;
case WAIT_LUN:
match = (cmd->device->id == t &&
cmd->device->lun == l);
break;
}
if (!match)
continue;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
status = qla2x00_eh_wait_on_command(cmd);
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return status;
}
static char *reset_errors[] = {
"HBA not online",
"HBA not ready",
"Task management failed",
"Waiting for command completions",
};
static int
__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, uint64_t, int))
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
int err;
if (!fcport) {
return FAILED;
}
err = fc_block_scsi_eh(cmd);
if (err != 0)
return err;
ql_log(ql_log_info, vha, 0x8009,
"%s RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", name, vha->host_no,
cmd->device->id, cmd->device->lun, cmd);
err = 0;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x800a,
"Wait for hba online failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
err = 2;
if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
!= QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x800c,
"do_reset failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
err = 3;
if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
cmd->device->lun, type) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x800d,
"wait for pending cmds failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
ql_log(ql_log_info, vha, 0x800e,
"%s RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n", name,
vha->host_no, cmd->device->id, cmd->device->lun, cmd);
return SUCCESS;
eh_reset_failed:
ql_log(ql_log_info, vha, 0x800f,
"%s RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n", name,
reset_errors[err], vha->host_no, cmd->device->id, cmd->device->lun,
cmd);
return FAILED;
}
static int
qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
struct qla_hw_data *ha = vha->hw;
if (qla2x00_isp_reg_stat(ha)) {
ql_log(ql_log_info, vha, 0x803e,
"PCI/Register disconnect, exiting.\n");
return FAILED;
}
return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
ha->isp_ops->lun_reset);
}
static int
qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
struct qla_hw_data *ha = vha->hw;
if (qla2x00_isp_reg_stat(ha)) {
ql_log(ql_log_info, vha, 0x803f,
"PCI/Register disconnect, exiting.\n");
return FAILED;
}
return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
ha->isp_ops->target_reset);
}
/**************************************************************************
* qla2xxx_eh_bus_reset
*
* Description:
* The bus reset function will reset the bus and abort any executing
* commands.
*
* Input:
* cmd = Linux SCSI command packet of the command that cause the
* bus reset.
*
* Returns:
* SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
static int
qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
int ret = FAILED;
unsigned int id;
uint64_t lun;
struct qla_hw_data *ha = vha->hw;
if (qla2x00_isp_reg_stat(ha)) {
ql_log(ql_log_info, vha, 0x8040,
"PCI/Register disconnect, exiting.\n");
return FAILED;
}
id = cmd->device->id;
lun = cmd->device->lun;
if (!fcport) {
return ret;
}
ret = fc_block_scsi_eh(cmd);
if (ret != 0)
return ret;
ret = FAILED;
ql_log(ql_log_info, vha, 0x8012,
"BUS RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun);
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
ql_log(ql_log_fatal, vha, 0x8013,
"Wait for hba online failed board disabled.\n");
goto eh_bus_reset_done;
}
if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
ret = SUCCESS;
if (ret == FAILED)
goto eh_bus_reset_done;
/* Flush outstanding commands. */
if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) !=
QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x8014,
"Wait for pending commands failed.\n");
ret = FAILED;
}
eh_bus_reset_done:
ql_log(ql_log_warn, vha, 0x802b,
"BUS RESET %s nexus=%ld:%d:%llu.\n",
(ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);
return ret;
}
/**************************************************************************
* qla2xxx_eh_host_reset
*
* Description:
* The reset function will reset the Adapter.
*
* Input:
* cmd = Linux SCSI command packet of the command that cause the
* adapter reset.
*
* Returns:
* Either SUCCESS or FAILED.
*
* Note:
**************************************************************************/
static int
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
struct qla_hw_data *ha = vha->hw;
int ret = FAILED;
unsigned int id;
uint64_t lun;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
if (qla2x00_isp_reg_stat(ha)) {
ql_log(ql_log_info, vha, 0x8041,
"PCI/Register disconnect, exiting.\n");
schedule_work(&ha->board_disable);
return SUCCESS;
}
id = cmd->device->id;
lun = cmd->device->lun;
ql_log(ql_log_info, vha, 0x8018,
"ADAPTER RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun);
/*
* No point in issuing another reset if one is active. Also do not
* attempt a reset if we are updating flash.
*/
if (qla2x00_reset_active(vha) || ha->optrom_state != QLA_SWAITING)
goto eh_host_reset_lock;
if (vha != base_vha) {
if (qla2x00_vp_abort_isp(vha))
goto eh_host_reset_lock;
} else {
if (IS_P3P_TYPE(vha->hw)) {
if (!qla82xx_fcoe_ctx_reset(vha)) {
/* Ctx reset success */
ret = SUCCESS;
goto eh_host_reset_lock;
}
/* fall thru if ctx reset failed */
}
if (ha->wq)
flush_workqueue(ha->wq);
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (ha->isp_ops->abort_isp(base_vha)) {
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
/* failed. schedule dpc to try */
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x802a,
"wait for hba online failed.\n");
goto eh_host_reset_lock;
}
}
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
}
/* Waiting for command to be returned to OS.*/
if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) ==
QLA_SUCCESS)
ret = SUCCESS;
eh_host_reset_lock:
ql_log(ql_log_info, vha, 0x8017,
"ADAPTER RESET %s nexus=%ld:%d:%llu.\n",
(ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);
return ret;
}
/*
* qla2x00_loop_reset
* Issue loop reset.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success
*/
int
qla2x00_loop_reset(scsi_qla_host_t *vha)
{
int ret;
struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
if (IS_QLAFX00(ha)) {
return qlafx00_loop_reset(vha);
}
if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
ret = ha->isp_ops->target_reset(fcport, 0, 0);
if (ret != QLA_SUCCESS) {
ql_dbg(ql_dbg_taskm, vha, 0x802c,
"Bus Reset failed: Reset=%d "
"d_id=%x.\n", ret, fcport->d_id.b24);
}
}
}
if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
[SCSI] qla2xxx: Correct race in loop_state assignment during reset handling. There's a subtle race in the loop/bus-reset handling whereby a VHA's loop-state can get incorrectly set to 'down' after the loop-reset and firmware's completion of link re-negotiation. The original code incorrectly assumes that firmware AENs would arrive only after mailbox-command execution to initiate the link-flap. Here's a good case with the old code (AENs arrive after mailbox-command completion): qla2xxx [0000:03:00.1]-8012:91: BUS RESET ISSUED nexus=91:0:4. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010100. qla2xxx [0000:03:00.1]-580e:91: Asynchronous P2P MODE received. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010400. qla2xxx [0000:03:00.1]-802b:91: BUS RESET SUCCEEDED nexus=91:0:4. qla2xxx [0000:03:00.1]-480b:91: Reset marker scheduled. qla2xxx [0000:03:00.1]-5812:91: Port database changed ffff 0006 0000. qla2xxx [0000:03:00.1]-505f:91: Link is operational (4 Gbps). qla2xxx [0000:03:00.1]-480c:91: Reset marker end. qla2xxx [0000:03:00.1]-480f:91: Loop resync scheduled. qla2xxx [0000:03:00.1]-8837:91: F/W Ready - OK. qla2xxx [0000:03:00.1]-883a:91: fw_state=3 (7, 0, 0, 0) curr time=170b8f315. qla2xxx [0000:03:00.1]-280e:91: HBA in F P2P topology. qla2xxx [0000:03:00.1]-2812:91: qla2x00_configure_hba success qla2xxx [0000:03:00.1]-2814:91: Configure loop -- dpc flags = 0x5260. notice how the 'Port database changed' (8014) arrived after the bus-reset handler completed 'BUS RESET SUCCEEDED'. Now, here's a failing case with the old code (AENs arrive before mailbox-command completion): qla2xxx [0000:03:00.1]-8012:91: BUS RESET ISSUED nexus=91:0:0. qla2xxx [0000:03:00.1]-580e:91: Asynchronous P2P MODE received. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010100. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010400. qla2xxx [0000:03:00.1]-4800:91: DPC handler sleeping. qla2xxx [0000:03:00.1]-5812:91: Port database changed ffff 0006 0000. qla2xxx [0000:03:00.1]-505f:91: Link is operational (4 Gbps). qla2xxx [0000:03:00.1]-802b:91: BUS RESET SUCCEEDED nexus=91:0:0. qla2xxx [0000:03:00.1]-480b:91: Reset marker scheduled. qla2xxx [0000:03:00.1]-480c:91: Reset marker end. qla2xxx [0000:03:00.1]-480f:91: Loop resync scheduled. qla2xxx [0000:03:00.1]-8837:91: F/W Ready - OK. qla2xxx [0000:03:00.1]-883a:91: fw_state=3 (7, 0, 0, 0) curr time=170be9eb2. qla2xxx [0000:03:00.1]-280e:91: HBA in F P2P topology. qla2xxx [0000:03:00.1]-2812:91: qla2x00_configure_hba success qla2xxx [0000:03:00.1]-2814:91: Configure loop -- dpc flags = 0x5260. qla2xxx [0000:03:00.1]-281e:91: Needs RSCN update and loop transition. qla2xxx [0000:03:00.1]-286a:91: qla2x00_configure_loop *** FAILED ***. qla2xxx [0000:03:00.1]-4810:91: Loop resync end. qla2xxx [0000:03:00.1]-4800:91: DPC handler sleeping. This race would ultimately lead to devices go unexpectedly offline until another link-flap or chip-reset would cause driver re-discovery to take place. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-08 06:57:42 +00:00
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 0);
ret = qla2x00_full_login_lip(vha);
if (ret != QLA_SUCCESS) {
ql_dbg(ql_dbg_taskm, vha, 0x802d,
"full_login_lip=%d.\n", ret);
}
}
if (ha->flags.enable_lip_reset) {
ret = qla2x00_lip_reset(vha);
if (ret != QLA_SUCCESS)
ql_dbg(ql_dbg_taskm, vha, 0x802e,
"lip_reset failed (%d).\n", ret);
}
/* Issue marker command only when we are going to start the I/O */
vha->marker_needed = 1;
return QLA_SUCCESS;
}
void
qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
{
int que, cnt, status;
unsigned long flags;
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
struct qla_tgt *tgt = vha->vha_tgt.qla_tgt;
struct qla_tgt_cmd *cmd;
uint8_t trace = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (que = 0; que < ha->max_req_queues; que++) {
req = ha->req_q_map[que];
if (!req)
continue;
if (!req->outstanding_cmds)
continue;
for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (sp) {
req->outstanding_cmds[cnt] = NULL;
if (sp->cmd_type == TYPE_SRB) {
if (sp->type == SRB_NVME_CMD ||
sp->type == SRB_NVME_LS) {
sp_get(sp);
spin_unlock_irqrestore(
&ha->hardware_lock, flags);
qla_nvme_abort(ha, sp);
spin_lock_irqsave(
&ha->hardware_lock, flags);
} else if (GET_CMD_SP(sp) &&
!ha->flags.eeh_busy &&
(!test_bit(ABORT_ISP_ACTIVE,
&vha->dpc_flags)) &&
(sp->type == SRB_SCSI_CMD)) {
/*
* Don't abort commands in
* adapter during EEH
* recovery as it's not
* accessible/responding.
*
* Get a reference to the sp
* and drop the lock. The
* reference ensures this
* sp->done() call and not the
* call in qla2xxx_eh_abort()
* ends the SCSI command (with
* result 'res').
*/
sp_get(sp);
spin_unlock_irqrestore(
&ha->hardware_lock, flags);
status = qla2xxx_eh_abort(
GET_CMD_SP(sp));
spin_lock_irqsave(
&ha->hardware_lock, flags);
/*
* Get rid of extra reference
* if immediate exit from
* ql2xxx_eh_abort
*/
if (status == FAILED &&
(qla2x00_isp_reg_stat(ha)))
atomic_dec(
&sp->ref_count);
}
sp->done(sp, res);
} else {
if (!vha->hw->tgt.tgt_ops || !tgt ||
qla_ini_mode_enabled(vha)) {
if (!trace)
ql_dbg(ql_dbg_tgt_mgt,
vha, 0xf003,
"HOST-ABORT-HNDLR: dpc_flags=%lx. Target mode disabled\n",
vha->dpc_flags);
continue;
}
cmd = (struct qla_tgt_cmd *)sp;
qlt_abort_cmd_on_host_reset(cmd->vha,
cmd);
}
}
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static int
qla2xxx_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-18 16:03:35 +00:00
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-18 16:03:35 +00:00
sdev->hostdata = *(fc_port_t **)rport->dd_data;
return 0;
}
static int
qla2xxx_slave_configure(struct scsi_device *sdev)
{
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct req_que *req = vha->req;
if (IS_T10_PI_CAPABLE(vha->hw))
blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
scsi_change_queue_depth(sdev, req->max_q_depth);
return 0;
}
static void
qla2xxx_slave_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
}
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
*
* At exit, the @ha's flags.enable_64bit_addressing set to indicated
* supported addressing method.
*/
static void
qla2x00_config_dma_addressing(struct qla_hw_data *ha)
{
/* Assume a 32bit DMA mask. */
ha->flags.enable_64bit_addressing = 0;
if (!dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
/* Any upper-dword bits set? */
if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
!pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {
/* Ok, a 64bit DMA mask is applicable. */
ha->flags.enable_64bit_addressing = 1;
ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
return;
}
}
dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(32));
}
static void
qla2x00_enable_intrs(struct qla_hw_data *ha)
{
unsigned long flags = 0;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->interrupts_on = 1;
/* enable risc and host interrupts */
WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
RD_REG_WORD(&reg->ictrl);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void
qla2x00_disable_intrs(struct qla_hw_data *ha)
{
unsigned long flags = 0;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->interrupts_on = 0;
/* disable risc and host interrupts */
WRT_REG_WORD(&reg->ictrl, 0);
RD_REG_WORD(&reg->ictrl);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void
qla24xx_enable_intrs(struct qla_hw_data *ha)
{
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->interrupts_on = 1;
WRT_REG_DWORD(&reg->ictrl, ICRX_EN_RISC_INT);
RD_REG_DWORD(&reg->ictrl);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void
qla24xx_disable_intrs(struct qla_hw_data *ha)
{
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (IS_NOPOLLING_TYPE(ha))
return;
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->interrupts_on = 0;
WRT_REG_DWORD(&reg->ictrl, 0);
RD_REG_DWORD(&reg->ictrl);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static int
qla2x00_iospace_config(struct qla_hw_data *ha)
{
resource_size_t pio;
uint16_t msix;
if (pci_request_selected_regions(ha->pdev, ha->bars,
QLA2XXX_DRIVER_NAME)) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0011,
"Failed to reserve PIO/MMIO regions (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
if (!(ha->bars & 1))
goto skip_pio;
/* We only need PIO for Flash operations on ISP2312 v2 chips. */
pio = pci_resource_start(ha->pdev, 0);
if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
ql_log_pci(ql_log_warn, ha->pdev, 0x0012,
"Invalid pci I/O region size (%s).\n",
pci_name(ha->pdev));
pio = 0;
}
} else {
ql_log_pci(ql_log_warn, ha->pdev, 0x0013,
"Region #0 no a PIO resource (%s).\n",
pci_name(ha->pdev));
pio = 0;
}
ha->pio_address = pio;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0014,
"PIO address=%llu.\n",
(unsigned long long)ha->pio_address);
skip_pio:
/* Use MMIO operations for all accesses. */
if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0015,
"Region #1 not an MMIO resource (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0016,
"Invalid PCI mem region size (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
if (!ha->iobase) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0017,
"Cannot remap MMIO (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
/* Determine queue resources */
ha->max_req_queues = ha->max_rsp_queues = 1;
ha->msix_count = QLA_BASE_VECTORS;
if (!ql2xmqsupport || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
if (ha->mqiobase) {
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0018,
"MQIO Base=%p.\n", ha->mqiobase);
/* Read MSIX vector size of the board */
pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix);
ha->msix_count = msix + 1;
/* Max queues are bounded by available msix vectors */
/* MB interrupt uses 1 vector */
ha->max_req_queues = ha->msix_count - 1;
ha->max_rsp_queues = ha->max_req_queues;
/* Queue pairs is the max value minus the base queue pair */
ha->max_qpairs = ha->max_rsp_queues - 1;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0188,
"Max no of queues pairs: %d.\n", ha->max_qpairs);
ql_log_pci(ql_log_info, ha->pdev, 0x001a,
"MSI-X vector count: %d.\n", ha->msix_count);
} else
ql_log_pci(ql_log_info, ha->pdev, 0x001b,
"BAR 3 not enabled.\n");
mqiobase_exit:
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x001c,
"MSIX Count: %d.\n", ha->msix_count);
return (0);
iospace_error_exit:
return (-ENOMEM);
}
static int
qla83xx_iospace_config(struct qla_hw_data *ha)
{
uint16_t msix;
if (pci_request_selected_regions(ha->pdev, ha->bars,
QLA2XXX_DRIVER_NAME)) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0117,
"Failed to reserve PIO/MMIO regions (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
/* Use MMIO operations for all accesses. */
if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) {
ql_log_pci(ql_log_warn, ha->pdev, 0x0118,
"Invalid pci I/O region size (%s).\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
ql_log_pci(ql_log_warn, ha->pdev, 0x0119,
"Invalid PCI mem region size (%s), aborting\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
ha->iobase = ioremap(pci_resource_start(ha->pdev, 0), MIN_IOBASE_LEN);
if (!ha->iobase) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x011a,
"Cannot remap MMIO (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
/* 64bit PCI BAR - BAR2 will correspoond to region 4 */
/* 83XX 26XX always use MQ type access for queues
* - mbar 2, a.k.a region 4 */
ha->max_req_queues = ha->max_rsp_queues = 1;
ha->msix_count = QLA_BASE_VECTORS;
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 4),
pci_resource_len(ha->pdev, 4));
if (!ha->mqiobase) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x011d,
"BAR2/region4 not enabled\n");
goto mqiobase_exit;
}
ha->msixbase = ioremap(pci_resource_start(ha->pdev, 2),
pci_resource_len(ha->pdev, 2));
if (ha->msixbase) {
/* Read MSIX vector size of the board */
pci_read_config_word(ha->pdev,
QLA_83XX_PCI_MSIX_CONTROL, &msix);
ha->msix_count = (msix & PCI_MSIX_FLAGS_QSIZE) + 1;
/*
* By default, driver uses at least two msix vectors
* (default & rspq)
*/
if (ql2xmqsupport) {
/* MB interrupt uses 1 vector */
ha->max_req_queues = ha->msix_count - 1;
/* ATIOQ needs 1 vector. That's 1 less QPair */
if (QLA_TGT_MODE_ENABLED())
ha->max_req_queues--;
ha->max_rsp_queues = ha->max_req_queues;
/* Queue pairs is the max value minus
* the base queue pair */
ha->max_qpairs = ha->max_req_queues - 1;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x00e3,
"Max no of queues pairs: %d.\n", ha->max_qpairs);
}
ql_log_pci(ql_log_info, ha->pdev, 0x011c,
"MSI-X vector count: %d.\n", ha->msix_count);
} else
ql_log_pci(ql_log_info, ha->pdev, 0x011e,
"BAR 1 not enabled.\n");
mqiobase_exit:
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f,
"MSIX Count: %d.\n", ha->msix_count);
return 0;
iospace_error_exit:
return -ENOMEM;
}
static struct isp_operations qla2100_isp_ops = {
.pci_config = qla2100_pci_config,
.reset_chip = qla2x00_reset_chip,
.chip_diag = qla2x00_chip_diag,
.config_rings = qla2x00_config_rings,
.reset_adapter = qla2x00_reset_adapter,
.nvram_config = qla2x00_nvram_config,
.update_fw_options = qla2x00_update_fw_options,
.load_risc = qla2x00_load_risc,
.pci_info_str = qla2x00_pci_info_str,
.fw_version_str = qla2x00_fw_version_str,
.intr_handler = qla2100_intr_handler,
.enable_intrs = qla2x00_enable_intrs,
.disable_intrs = qla2x00_disable_intrs,
.abort_command = qla2x00_abort_command,
.target_reset = qla2x00_abort_target,
.lun_reset = qla2x00_lun_reset,
.fabric_login = qla2x00_login_fabric,
.fabric_logout = qla2x00_fabric_logout,
.calc_req_entries = qla2x00_calc_iocbs_32,
.build_iocbs = qla2x00_build_scsi_iocbs_32,
.prep_ms_iocb = qla2x00_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
.read_nvram = qla2x00_read_nvram_data,
.write_nvram = qla2x00_write_nvram_data,
.fw_dump = qla2100_fw_dump,
.beacon_on = NULL,
.beacon_off = NULL,
.beacon_blink = NULL,
.read_optrom = qla2x00_read_optrom_data,
.write_optrom = qla2x00_write_optrom_data,
.get_flash_version = qla2x00_get_flash_version,
.start_scsi = qla2x00_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla2x00_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla2300_isp_ops = {
.pci_config = qla2300_pci_config,
.reset_chip = qla2x00_reset_chip,
.chip_diag = qla2x00_chip_diag,
.config_rings = qla2x00_config_rings,
.reset_adapter = qla2x00_reset_adapter,
.nvram_config = qla2x00_nvram_config,
.update_fw_options = qla2x00_update_fw_options,
.load_risc = qla2x00_load_risc,
.pci_info_str = qla2x00_pci_info_str,
.fw_version_str = qla2x00_fw_version_str,
.intr_handler = qla2300_intr_handler,
.enable_intrs = qla2x00_enable_intrs,
.disable_intrs = qla2x00_disable_intrs,
.abort_command = qla2x00_abort_command,
.target_reset = qla2x00_abort_target,
.lun_reset = qla2x00_lun_reset,
.fabric_login = qla2x00_login_fabric,
.fabric_logout = qla2x00_fabric_logout,
.calc_req_entries = qla2x00_calc_iocbs_32,
.build_iocbs = qla2x00_build_scsi_iocbs_32,
.prep_ms_iocb = qla2x00_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
.read_nvram = qla2x00_read_nvram_data,
.write_nvram = qla2x00_write_nvram_data,
.fw_dump = qla2300_fw_dump,
.beacon_on = qla2x00_beacon_on,
.beacon_off = qla2x00_beacon_off,
.beacon_blink = qla2x00_beacon_blink,
.read_optrom = qla2x00_read_optrom_data,
.write_optrom = qla2x00_write_optrom_data,
.get_flash_version = qla2x00_get_flash_version,
.start_scsi = qla2x00_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla2x00_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla24xx_isp_ops = {
.pci_config = qla24xx_pci_config,
.reset_chip = qla24xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla24xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla24xx_nvram_config,
.update_fw_options = qla24xx_update_fw_options,
.load_risc = qla24xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = qla24xx_read_nvram_data,
.write_nvram = qla24xx_write_nvram_data,
.fw_dump = qla24xx_fw_dump,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = qla24xx_beacon_blink,
.read_optrom = qla24xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qla24xx_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla2x00_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla25xx_isp_ops = {
.pci_config = qla25xx_pci_config,
.reset_chip = qla24xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla24xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla24xx_nvram_config,
.update_fw_options = qla24xx_update_fw_options,
.load_risc = qla24xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = qla25xx_read_nvram_data,
.write_nvram = qla25xx_write_nvram_data,
.fw_dump = qla25xx_fw_dump,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = qla24xx_beacon_blink,
.read_optrom = qla25xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qla24xx_dif_start_scsi,
.start_scsi_mq = qla2xxx_dif_start_scsi_mq,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla2x00_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla81xx_isp_ops = {
.pci_config = qla25xx_pci_config,
.reset_chip = qla24xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla24xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla81xx_update_fw_options,
.load_risc = qla81xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = NULL,
.write_nvram = NULL,
.fw_dump = qla81xx_fw_dump,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = qla83xx_beacon_blink,
.read_optrom = qla25xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qla24xx_dif_start_scsi,
.start_scsi_mq = qla2xxx_dif_start_scsi_mq,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla2x00_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla82xx_isp_ops = {
.pci_config = qla82xx_pci_config,
.reset_chip = qla82xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla82xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla24xx_update_fw_options,
.load_risc = qla82xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla82xx_intr_handler,
.enable_intrs = qla82xx_enable_intrs,
.disable_intrs = qla82xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = qla24xx_read_nvram_data,
.write_nvram = qla24xx_write_nvram_data,
.fw_dump = qla82xx_fw_dump,
.beacon_on = qla82xx_beacon_on,
.beacon_off = qla82xx_beacon_off,
.beacon_blink = NULL,
.read_optrom = qla82xx_read_optrom_data,
.write_optrom = qla82xx_write_optrom_data,
.get_flash_version = qla82xx_get_flash_version,
.start_scsi = qla82xx_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qla82xx_abort_isp,
.iospace_config = qla82xx_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla8044_isp_ops = {
.pci_config = qla82xx_pci_config,
.reset_chip = qla82xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla82xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla24xx_update_fw_options,
.load_risc = qla82xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla8044_intr_handler,
.enable_intrs = qla82xx_enable_intrs,
.disable_intrs = qla82xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = NULL,
.write_nvram = NULL,
.fw_dump = qla8044_fw_dump,
.beacon_on = qla82xx_beacon_on,
.beacon_off = qla82xx_beacon_off,
.beacon_blink = NULL,
.read_optrom = qla8044_read_optrom_data,
.write_optrom = qla8044_write_optrom_data,
.get_flash_version = qla82xx_get_flash_version,
.start_scsi = qla82xx_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qla8044_abort_isp,
.iospace_config = qla82xx_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qla83xx_isp_ops = {
.pci_config = qla25xx_pci_config,
.reset_chip = qla24xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla24xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla81xx_update_fw_options,
.load_risc = qla81xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = NULL,
.write_nvram = NULL,
.fw_dump = qla83xx_fw_dump,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = qla83xx_beacon_blink,
.read_optrom = qla25xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qla24xx_dif_start_scsi,
.start_scsi_mq = qla2xxx_dif_start_scsi_mq,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla83xx_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static struct isp_operations qlafx00_isp_ops = {
.pci_config = qlafx00_pci_config,
.reset_chip = qlafx00_soft_reset,
.chip_diag = qlafx00_chip_diag,
.config_rings = qlafx00_config_rings,
.reset_adapter = qlafx00_soft_reset,
.nvram_config = NULL,
.update_fw_options = NULL,
.load_risc = NULL,
.pci_info_str = qlafx00_pci_info_str,
.fw_version_str = qlafx00_fw_version_str,
.intr_handler = qlafx00_intr_handler,
.enable_intrs = qlafx00_enable_intrs,
.disable_intrs = qlafx00_disable_intrs,
.abort_command = qla24xx_async_abort_command,
.target_reset = qlafx00_abort_target,
.lun_reset = qlafx00_lun_reset,
.fabric_login = NULL,
.fabric_logout = NULL,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = qla24xx_read_nvram_data,
.write_nvram = qla24xx_write_nvram_data,
.fw_dump = NULL,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = NULL,
.read_optrom = qla24xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qlafx00_start_scsi,
.start_scsi_mq = NULL,
.abort_isp = qlafx00_abort_isp,
.iospace_config = qlafx00_iospace_config,
.initialize_adapter = qlafx00_initialize_adapter,
};
static struct isp_operations qla27xx_isp_ops = {
.pci_config = qla25xx_pci_config,
.reset_chip = qla24xx_reset_chip,
.chip_diag = qla24xx_chip_diag,
.config_rings = qla24xx_config_rings,
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla81xx_update_fw_options,
.load_risc = qla81xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
.target_reset = qla24xx_abort_target,
.lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.build_iocbs = NULL,
.prep_ms_iocb = qla24xx_prep_ms_iocb,
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
.read_nvram = NULL,
.write_nvram = NULL,
.fw_dump = qla27xx_fwdump,
.beacon_on = qla24xx_beacon_on,
.beacon_off = qla24xx_beacon_off,
.beacon_blink = qla83xx_beacon_blink,
.read_optrom = qla25xx_read_optrom_data,
.write_optrom = qla24xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
.start_scsi = qla24xx_dif_start_scsi,
.start_scsi_mq = qla2xxx_dif_start_scsi_mq,
.abort_isp = qla2x00_abort_isp,
.iospace_config = qla83xx_iospace_config,
.initialize_adapter = qla2x00_initialize_adapter,
};
static inline void
qla2x00_set_isp_flags(struct qla_hw_data *ha)
{
ha->device_type = DT_EXTENDED_IDS;
switch (ha->pdev->device) {
case PCI_DEVICE_ID_QLOGIC_ISP2100:
ha->isp_type |= DT_ISP2100;
ha->device_type &= ~DT_EXTENDED_IDS;
ha->fw_srisc_address = RISC_START_ADDRESS_2100;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2200:
ha->isp_type |= DT_ISP2200;
ha->device_type &= ~DT_EXTENDED_IDS;
ha->fw_srisc_address = RISC_START_ADDRESS_2100;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2300:
ha->isp_type |= DT_ISP2300;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2312:
ha->isp_type |= DT_ISP2312;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2322:
ha->isp_type |= DT_ISP2322;
ha->device_type |= DT_ZIO_SUPPORTED;
if (ha->pdev->subsystem_vendor == 0x1028 &&
ha->pdev->subsystem_device == 0x0170)
ha->device_type |= DT_OEM_001;
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP6312:
ha->isp_type |= DT_ISP6312;
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP6322:
ha->isp_type |= DT_ISP6322;
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2422:
ha->isp_type |= DT_ISP2422;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2432:
ha->isp_type |= DT_ISP2432;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP8432:
ha->isp_type |= DT_ISP8432;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP5422:
ha->isp_type |= DT_ISP5422;
ha->device_type |= DT_FWI2;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP5432:
ha->isp_type |= DT_ISP5432;
ha->device_type |= DT_FWI2;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2532:
ha->isp_type |= DT_ISP2532;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP8001:
ha->isp_type |= DT_ISP8001;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP8021:
ha->isp_type |= DT_ISP8021;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
/* Initialize 82XX ISP flags */
qla82xx_init_flags(ha);
break;
case PCI_DEVICE_ID_QLOGIC_ISP8044:
ha->isp_type |= DT_ISP8044;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
/* Initialize 82XX ISP flags */
qla82xx_init_flags(ha);
break;
case PCI_DEVICE_ID_QLOGIC_ISP2031:
ha->isp_type |= DT_ISP2031;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->device_type |= DT_T10_PI;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP8031:
ha->isp_type |= DT_ISP8031;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->device_type |= DT_T10_PI;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISPF001:
ha->isp_type |= DT_ISPFX00;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2071:
ha->isp_type |= DT_ISP2071;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->device_type |= DT_T10_PI;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2271:
ha->isp_type |= DT_ISP2271;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->device_type |= DT_T10_PI;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2261:
ha->isp_type |= DT_ISP2261;
ha->device_type |= DT_ZIO_SUPPORTED;
ha->device_type |= DT_FWI2;
ha->device_type |= DT_IIDMA;
ha->device_type |= DT_T10_PI;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
}
if (IS_QLA82XX(ha))
ha->port_no = ha->portnum & 1;
else {
/* Get adapter physical port no from interrupt pin register. */
pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
if (IS_QLA27XX(ha))
ha->port_no--;
else
ha->port_no = !(ha->port_no & 1);
}
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x000b,
"device_type=0x%x port=%d fw_srisc_address=0x%x.\n",
ha->device_type, ha->port_no, ha->fw_srisc_address);
}
static void
qla2xxx_scan_start(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
if (vha->hw->flags.running_gold_fw)
return;
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(RSCN_UPDATE, &vha->dpc_flags);
set_bit(NPIV_CONFIG_NEEDED, &vha->dpc_flags);
}
static int
qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
scsi_qla_host_t *vha = shost_priv(shost);
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init A system can get hung task timeouts if a qlogic board fails during initialization (if the board breaks again or fails the init). The hang involves the scsi scan. In a nutshell, since commit beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race"): ...it is possible to have freed ha (base_vha->hw) early by a call to qla2x00_remove_one when pdev->enable_cnt equals zero: if (!atomic_read(&pdev->enable_cnt)) { scsi_host_put(base_vha->host); kfree(ha); pci_set_drvdata(pdev, NULL); return; Almost always, the scsi_host_put above frees the vha structure (attached to the end of the Scsi_Host we're putting) since it's the last put, and life is good. However, if we are entering this routine because the adapter has broken sometime during initialization AND a scsi scan is already in progress (and has done its own scsi_host_get), vha will not be freed. What's worse, the scsi scan will access the freed ha structure through qla2xxx_scan_finished: if (time > vha->hw->loop_reset_delay * HZ) return 1; The scsi scan keeps checking to see if a scan is complete by calling qla2xxx_scan_finished. There is a timeout value that limits the length of time a scan can take (hw->loop_reset_delay, usually set to 5 seconds), but this definition is in the data structure (hw) that can get freed early. This can yield unpredictable results, the worst of which is that the scsi scan can hang indefinitely. This happens when the freed structure gets reused and loop_reset_delay gets overwritten with garbage, which the scan obliviously uses as its timeout value. The fix for this is simple: at the top of qla2xxx_scan_finished, check for the UNLOADING bit in the vha structure (_vha is not freed at this point). If UNLOADING is set, we exit the scan for this adapter immediately. After this last reference to the ha structure, we'll exit the scan for this adapter, and continue on. This problem is hard to hit, but I have run into it doing negative testing many times now (with a test specifically designed to bring it out), so I can verify that this fix works. My testing has been against a RHEL7 driver variant, but the bug and patch are equally relevant to to the upstream driver. Fixes: beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-21 20:45:27 +00:00
if (test_bit(UNLOADING, &vha->dpc_flags))
return 1;
if (!vha->host)
return 1;
if (time > vha->hw->loop_reset_delay * HZ)
return 1;
return atomic_read(&vha->loop_state) == LOOP_READY;
}
static void qla2x00_iocb_work_fn(struct work_struct *work)
{
struct scsi_qla_host *vha = container_of(work,
struct scsi_qla_host, iocb_work);
int cnt = 0;
while (!list_empty(&vha->work_list)) {
qla2x00_do_work(vha);
cnt++;
if (cnt > 10)
break;
}
}
/*
* PCI driver interface
*/
static int
qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
int ret = -ENODEV;
struct Scsi_Host *host;
scsi_qla_host_t *base_vha = NULL;
struct qla_hw_data *ha;
char pci_info[30];
char fw_str[30], wq_name[30];
struct scsi_host_template *sht;
int bars, mem_only = 0;
uint16_t req_length = 0, rsp_length = 0;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
int i;
bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
sht = &qla2xxx_driver_template;
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2031 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8031 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISPF001 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8044 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2071 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2271 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2261) {
bars = pci_select_bars(pdev, IORESOURCE_MEM);
mem_only = 1;
ql_dbg_pci(ql_dbg_init, pdev, 0x0007,
"Mem only adapter.\n");
}
ql_dbg_pci(ql_dbg_init, pdev, 0x0008,
"Bars=%d.\n", bars);
if (mem_only) {
if (pci_enable_device_mem(pdev))
return ret;
} else {
if (pci_enable_device(pdev))
return ret;
}
/* This may fail but that's ok */
pci_enable_pcie_error_reporting(pdev);
ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
if (!ha) {
ql_log_pci(ql_log_fatal, pdev, 0x0009,
"Unable to allocate memory for ha.\n");
goto disable_device;
}
ql_dbg_pci(ql_dbg_init, pdev, 0x000a,
"Memory allocated for ha=%p.\n", ha);
ha->pdev = pdev;
INIT_LIST_HEAD(&ha->tgt.q_full_list);
spin_lock_init(&ha->tgt.q_full_lock);
spin_lock_init(&ha->tgt.sess_lock);
spin_lock_init(&ha->tgt.atio_lock);
atomic_set(&ha->nvme_active_aen_cnt, 0);
/* Clear our data area */
ha->bars = bars;
ha->mem_only = mem_only;
spin_lock_init(&ha->hardware_lock);
spin_lock_init(&ha->vport_slock);
mutex_init(&ha->selflogin_lock);
mutex_init(&ha->optrom_mutex);
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
/* Set EEH reset type to fundamental if required by hba */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha) ||
IS_QLA83XX(ha) || IS_QLA27XX(ha))
pdev->needs_freset = 1;
ha->prev_topology = 0;
ha->init_cb_size = sizeof(init_cb_t);
ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->optrom_size = OPTROM_SIZE_2300;
/* Assign ISP specific operations. */
if (IS_QLA2100(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
req_length = REQUEST_ENTRY_CNT_2100;
rsp_length = RESPONSE_ENTRY_CNT_2100;
ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
ha->gid_list_info_size = 4;
ha->flash_conf_off = ~0;
ha->flash_data_off = ~0;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA2200(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
req_length = REQUEST_ENTRY_CNT_2200;
rsp_length = RESPONSE_ENTRY_CNT_2100;
ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
ha->gid_list_info_size = 4;
ha->flash_conf_off = ~0;
ha->flash_data_off = ~0;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA23XX(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_2200;
rsp_length = RESPONSE_ENTRY_CNT_2300;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->gid_list_info_size = 6;
if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->optrom_size = OPTROM_SIZE_2322;
ha->flash_conf_off = ~0;
ha->flash_data_off = ~0;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2300_isp_ops;
} else if (IS_QLA24XX_TYPE(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_24XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA24XX;
ha->isp_ops = &qla24xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
} else if (IS_QLA25XX(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_25XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla25xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
} else if (IS_QLA81XX(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_81XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla81xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
} else if (IS_QLA82XX(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_82XX;
rsp_length = RESPONSE_ENTRY_CNT_82XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_82XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla82xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
} else if (IS_QLA8044(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_82XX;
rsp_length = RESPONSE_ENTRY_CNT_82XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_83XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla8044_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
} else if (IS_QLA83XX(ha)) {
ha->portnum = PCI_FUNC(ha->pdev->devfn);
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_83XX;
rsp_length = RESPONSE_ENTRY_CNT_83XX;
ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_83XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla83xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
} else if (IS_QLAFX00(ha)) {
ha->max_fibre_devices = MAX_FIBRE_DEVICES_FX00;
ha->mbx_count = MAILBOX_REGISTER_COUNT_FX00;
ha->aen_mbx_count = AEN_MAILBOX_REGISTER_COUNT_FX00;
req_length = REQUEST_ENTRY_CNT_FX00;
rsp_length = RESPONSE_ENTRY_CNT_FX00;
ha->isp_ops = &qlafx00_isp_ops;
ha->port_down_retry_count = 30; /* default value */
ha->mr.fw_hbt_cnt = QLAFX00_HEARTBEAT_INTERVAL;
ha->mr.fw_reset_timer_tick = QLAFX00_RESET_INTERVAL;
ha->mr.fw_critemp_timer_tick = QLAFX00_CRITEMP_INTERVAL;
ha->mr.fw_hbt_en = 1;
ha->mr.host_info_resend = false;
ha->mr.hinfo_resend_timer_tick = QLAFX00_HINFO_RESEND_INTERVAL;
} else if (IS_QLA27XX(ha)) {
ha->portnum = PCI_FUNC(ha->pdev->devfn);
ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_83XX;
rsp_length = RESPONSE_ENTRY_CNT_83XX;
ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_83XX;
ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla27xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
ha->nvram_conf_off = ~0;
ha->nvram_data_off = ~0;
}
ql_dbg_pci(ql_dbg_init, pdev, 0x001e,
"mbx_count=%d, req_length=%d, "
"rsp_length=%d, max_loop_id=%d, init_cb_size=%d, "
"gid_list_info_size=%d, optrom_size=%d, nvram_npiv_size=%d, "
"max_fibre_devices=%d.\n",
ha->mbx_count, req_length, rsp_length, ha->max_loop_id,
ha->init_cb_size, ha->gid_list_info_size, ha->optrom_size,
ha->nvram_npiv_size, ha->max_fibre_devices);
ql_dbg_pci(ql_dbg_init, pdev, 0x001f,
"isp_ops=%p, flash_conf_off=%d, "
"flash_data_off=%d, nvram_conf_off=%d, nvram_data_off=%d.\n",
ha->isp_ops, ha->flash_conf_off, ha->flash_data_off,
ha->nvram_conf_off, ha->nvram_data_off);
/* Configure PCI I/O space */
ret = ha->isp_ops->iospace_config(ha);
if (ret)
goto iospace_config_failed;
ql_log_pci(ql_log_info, pdev, 0x001d,
"Found an ISP%04X irq %d iobase 0x%p.\n",
pdev->device, pdev->irq, ha->iobase);
mutex_init(&ha->vport_lock);
mutex_init(&ha->mq_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
init_completion(&ha->dcbx_comp);
init_completion(&ha->lb_portup_comp);
set_bit(0, (unsigned long *) ha->vp_idx_map);
qla2x00_config_dma_addressing(ha);
ql_dbg_pci(ql_dbg_init, pdev, 0x0020,
"64 Bit addressing is %s.\n",
ha->flags.enable_64bit_addressing ? "enable" :
"disable");
ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
if (ret) {
ql_log_pci(ql_log_fatal, pdev, 0x0031,
"Failed to allocate memory for adapter, aborting.\n");
goto probe_hw_failed;
}
req->max_q_depth = MAX_Q_DEPTH;
if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
req->max_q_depth = ql2xmaxqdepth;
base_vha = qla2x00_create_host(sht, ha);
if (!base_vha) {
ret = -ENOMEM;
qla2x00_mem_free(ha);
qla2x00_free_req_que(ha, req);
qla2x00_free_rsp_que(ha, rsp);
goto probe_hw_failed;
}
pci_set_drvdata(pdev, base_vha);
set_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags);
host = base_vha->host;
base_vha->req = req;
if (IS_QLA2XXX_MIDTYPE(ha))
base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
else
base_vha->mgmt_svr_loop_id = MANAGEMENT_SERVER +
base_vha->vp_idx;
/* Setup fcport template structure. */
ha->mr.fcport.vha = base_vha;
ha->mr.fcport.port_type = FCT_UNKNOWN;
ha->mr.fcport.loop_id = FC_NO_LOOP_ID;
qla2x00_set_fcport_state(&ha->mr.fcport, FCS_UNCONFIGURED);
ha->mr.fcport.supported_classes = FC_COS_UNSPECIFIED;
ha->mr.fcport.scan_state = 1;
/* Set the SG table size based on ISP type */
if (!IS_FWI2_CAPABLE(ha)) {
if (IS_QLA2100(ha))
host->sg_tablesize = 32;
} else {
if (!IS_QLA82XX(ha))
host->sg_tablesize = QLA_SG_ALL;
}
host->max_id = ha->max_fibre_devices;
host->cmd_per_lun = 3;
host->unique_id = host->host_no;
if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
host->max_channel = MAX_BUSES - 1;
/* Older HBAs support only 16-bit LUNs */
if (!IS_QLAFX00(ha) && !IS_FWI2_CAPABLE(ha) &&
ql2xmaxlun > 0xffff)
host->max_lun = 0xffff;
else
host->max_lun = ql2xmaxlun;
host->transportt = qla2xxx_transport_template;
sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
ql_dbg(ql_dbg_init, base_vha, 0x0033,
"max_id=%d this_id=%d "
"cmd_per_len=%d unique_id=%d max_cmd_len=%d max_channel=%d "
"max_lun=%llu transportt=%p, vendor_id=%llu.\n", host->max_id,
host->this_id, host->cmd_per_lun, host->unique_id,
host->max_cmd_len, host->max_channel, host->max_lun,
host->transportt, sht->vendor_id);
/* Set up the irqs */
ret = qla2x00_request_irqs(ha, rsp);
if (ret)
goto probe_init_failed;
/* Alloc arrays of request and response ring ptrs */
if (!qla2x00_alloc_queues(ha, req, rsp)) {
ql_log(ql_log_fatal, base_vha, 0x003d,
"Failed to allocate memory for queue pointers..."
"aborting.\n");
goto probe_init_failed;
}
if (ha->mqenable && shost_use_blk_mq(host)) {
/* number of hardware queues supported by blk/scsi-mq*/
host->nr_hw_queues = ha->max_qpairs;
ql_dbg(ql_dbg_init, base_vha, 0x0192,
"blk/scsi-mq enabled, HW queues = %d.\n", host->nr_hw_queues);
} else
ql_dbg(ql_dbg_init, base_vha, 0x0193,
"blk/scsi-mq disabled.\n");
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_probe_one_stage1(base_vha, ha);
pci_save_state(pdev);
/* Assign back pointers */
rsp->req = req;
req->rsp = rsp;
if (IS_QLAFX00(ha)) {
ha->rsp_q_map[0] = rsp;
ha->req_q_map[0] = req;
set_bit(0, ha->req_qid_map);
set_bit(0, ha->rsp_qid_map);
}
/* FWI2-capable only. */
req->req_q_in = &ha->iobase->isp24.req_q_in;
req->req_q_out = &ha->iobase->isp24.req_q_out;
rsp->rsp_q_in = &ha->iobase->isp24.rsp_q_in;
rsp->rsp_q_out = &ha->iobase->isp24.rsp_q_out;
if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
req->req_q_in = &ha->mqiobase->isp25mq.req_q_in;
req->req_q_out = &ha->mqiobase->isp25mq.req_q_out;
rsp->rsp_q_in = &ha->mqiobase->isp25mq.rsp_q_in;
rsp->rsp_q_out = &ha->mqiobase->isp25mq.rsp_q_out;
}
if (IS_QLAFX00(ha)) {
req->req_q_in = &ha->iobase->ispfx00.req_q_in;
req->req_q_out = &ha->iobase->ispfx00.req_q_out;
rsp->rsp_q_in = &ha->iobase->ispfx00.rsp_q_in;
rsp->rsp_q_out = &ha->iobase->ispfx00.rsp_q_out;
}
if (IS_P3P_TYPE(ha)) {
req->req_q_out = &ha->iobase->isp82.req_q_out[0];
rsp->rsp_q_in = &ha->iobase->isp82.rsp_q_in[0];
rsp->rsp_q_out = &ha->iobase->isp82.rsp_q_out[0];
}
ql_dbg(ql_dbg_multiq, base_vha, 0xc009,
"rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n",
ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp);
ql_dbg(ql_dbg_multiq, base_vha, 0xc00a,
"req->req_q_in=%p req->req_q_out=%p "
"rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n",
req->req_q_in, req->req_q_out,
rsp->rsp_q_in, rsp->rsp_q_out);
ql_dbg(ql_dbg_init, base_vha, 0x003e,
"rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n",
ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp);
ql_dbg(ql_dbg_init, base_vha, 0x003f,
"req->req_q_in=%p req->req_q_out=%p rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n",
req->req_q_in, req->req_q_out, rsp->rsp_q_in, rsp->rsp_q_out);
if (ha->isp_ops->initialize_adapter(base_vha)) {
ql_log(ql_log_fatal, base_vha, 0x00d6,
"Failed to initialize adapter - Adapter flags %x.\n",
base_vha->device_flags);
if (IS_QLA82XX(ha)) {
qla82xx_idc_lock(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA8XXX_DEV_FAILED);
qla82xx_idc_unlock(ha);
ql_log(ql_log_fatal, base_vha, 0x00d7,
"HW State: FAILED.\n");
} else if (IS_QLA8044(ha)) {
qla8044_idc_lock(ha);
qla8044_wr_direct(base_vha,
QLA8044_CRB_DEV_STATE_INDEX,
QLA8XXX_DEV_FAILED);
qla8044_idc_unlock(ha);
ql_log(ql_log_fatal, base_vha, 0x0150,
"HW State: FAILED.\n");
}
ret = -ENODEV;
goto probe_failed;
}
if (IS_QLAFX00(ha))
host->can_queue = QLAFX00_MAX_CANQUEUE;
else
host->can_queue = req->num_outstanding_cmds - 10;
ql_dbg(ql_dbg_init, base_vha, 0x0032,
"can_queue=%d, req=%p, mgmt_svr_loop_id=%d, sg_tablesize=%d.\n",
host->can_queue, base_vha->req,
base_vha->mgmt_svr_loop_id, host->sg_tablesize);
if (ha->mqenable) {
bool mq = false;
bool startit = false;
ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 0);
if (QLA_TGT_MODE_ENABLED()) {
mq = true;
startit = false;
}
if ((ql2x_ini_mode == QLA2XXX_INI_MODE_ENABLED) &&
shost_use_blk_mq(host)) {
mq = true;
startit = true;
}
if (mq) {
/* Create start of day qpairs for Block MQ */
for (i = 0; i < ha->max_qpairs; i++)
qla2xxx_create_qpair(base_vha, 5, 0, startit);
}
}
if (ha->flags.running_gold_fw)
goto skip_dpc;
/*
* Startup the kernel thread for this host adapter
*/
ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
"%s_dpc", base_vha->host_str);
if (IS_ERR(ha->dpc_thread)) {
ql_log(ql_log_fatal, base_vha, 0x00ed,
"Failed to start DPC thread.\n");
ret = PTR_ERR(ha->dpc_thread);
goto probe_failed;
}
ql_dbg(ql_dbg_init, base_vha, 0x00ee,
"DPC thread started successfully.\n");
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/*
* If we're not coming up in initiator mode, we might sit for
* a while without waking up the dpc thread, which leads to a
* stuck process warning. So just kick the dpc once here and
* let the kthread start (and go back to sleep in qla2x00_do_dpc).
*/
qla2xxx_wake_dpc(base_vha);
INIT_WORK(&base_vha->iocb_work, qla2x00_iocb_work_fn);
INIT_WORK(&ha->board_disable, qla2x00_disable_board_on_pci_error);
if (IS_QLA8031(ha) || IS_MCTP_CAPABLE(ha)) {
sprintf(wq_name, "qla2xxx_%lu_dpc_lp_wq", base_vha->host_no);
ha->dpc_lp_wq = create_singlethread_workqueue(wq_name);
INIT_WORK(&ha->idc_aen, qla83xx_service_idc_aen);
sprintf(wq_name, "qla2xxx_%lu_dpc_hp_wq", base_vha->host_no);
ha->dpc_hp_wq = create_singlethread_workqueue(wq_name);
INIT_WORK(&ha->nic_core_reset, qla83xx_nic_core_reset_work);
INIT_WORK(&ha->idc_state_handler,
qla83xx_idc_state_handler_work);
INIT_WORK(&ha->nic_core_unrecoverable,
qla83xx_nic_core_unrecoverable_work);
}
skip_dpc:
list_add_tail(&base_vha->list, &ha->vp_list);
base_vha->host->irq = ha->pdev->irq;
/* Initialized the timer */
qla2x00_start_timer(base_vha, qla2x00_timer, WATCH_INTERVAL);
ql_dbg(ql_dbg_init, base_vha, 0x00ef,
"Started qla2x00_timer with "
"interval=%d.\n", WATCH_INTERVAL);
ql_dbg(ql_dbg_init, base_vha, 0x00f0,
"Detected hba at address=%p.\n",
ha);
if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
int prot = 0, guard;
base_vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_init, base_vha, 0x00f1,
"Registering for DIF/DIX type 1 and 3 protection.\n");
if (ql2xenabledif == 1)
prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(host,
prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
| SHOST_DIX_TYPE2_PROTECTION
| SHOST_DIX_TYPE3_PROTECTION);
guard = SHOST_DIX_GUARD_CRC;
if (IS_PI_IPGUARD_CAPABLE(ha) &&
(ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha)))
guard |= SHOST_DIX_GUARD_IP;
scsi_host_set_guard(host, guard);
} else
base_vha->flags.difdix_supported = 0;
}
ha->isp_ops->enable_intrs(ha);
if (IS_QLAFX00(ha)) {
ret = qlafx00_fx_disc(base_vha,
&base_vha->hw->mr.fcport, FXDISC_GET_CONFIG_INFO);
host->sg_tablesize = (ha->mr.extended_io_enabled) ?
QLA_SG_ALL : 128;
}
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
[SCSI] qla2xxx: dpc thread can execute before scsi host has been added Fix crash in qla2x00_fdmi_register() due to the dpc thread executing before the scsi host has been fully added. Unable to handle kernel NULL pointer dereference (address 00000000000001d0) qla2xxx_7_dpc[4140]: Oops 8813272891392 [1] Call Trace: [<a000000100016910>] show_stack+0x50/0xa0 sp=e00000b07c59f930 bsp=e00000b07c591400 [<a000000100017180>] show_regs+0x820/0x860 sp=e00000b07c59fb00 bsp=e00000b07c5913a0 [<a00000010003bd60>] die+0x1a0/0x2e0 sp=e00000b07c59fb00 bsp=e00000b07c591360 [<a0000001000681a0>] ia64_do_page_fault+0x8c0/0x9e0 sp=e00000b07c59fb00 bsp=e00000b07c591310 [<a00000010000c8e0>] ia64_native_leave_kernel+0x0/0x270 sp=e00000b07c59fb90 bsp=e00000b07c591310 [<a000000207197350>] qla2x00_fdmi_register+0x850/0xbe0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591290 [<a000000207171570>] qla2x00_configure_loop+0x1930/0x34c0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591128 [<a0000002071732b0>] qla2x00_loop_resync+0x1b0/0x2e0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c5910c0 [<a000000207166d40>] qla2x00_do_dpc+0x9a0/0xce0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c590fa0 [<a0000001000d5bb0>] kthread+0x110/0x140 sp=e00000b07c59fe00 bsp=e00000b07c590f68 [<a000000100014a30>] kernel_thread_helper+0xd0/0x100 sp=e00000b07c59fe30 bsp=e00000b07c590f40 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40 sp=e00000b07c59fe30 bsp=e00000b07c590f40 crash> dis a000000207197350 0xa000000207197350 <qla2x00_fdmi_register+2128>: [MMI] ld1 r45=[r14];; crash> scsi_qla_host.host 0xe00000b058c73ff8 host = 0xe00000b058c73be0, crash> Scsi_Host.shost_data 0xe00000b058c73be0 shost_data = 0x0, <<<<<<<<<<< The fc_transport fc_* workqueue threads have yet to be created. crash> ps | grep _7 3891 2 2 e00000b075c80000 IN 0.0 0 0 [scsi_eh_7] 4140 2 3 e00000b07c590000 RU 0.0 0 0 [qla2xxx_7_dpc] The thread creating adding the Scsi_Host is blocked due to other activity in sysfs. crash> bt 3762 PID: 3762 TASK: e00000b071e70000 CPU: 3 COMMAND: "modprobe" #0 [BSP:e00000b071e71548] schedule at a000000100727e00 #1 [BSP:e00000b071e714c8] __mutex_lock_slowpath at a0000001007295a0 #2 [BSP:e00000b071e714a8] mutex_lock at a000000100729830 #3 [BSP:e00000b071e71478] sysfs_addrm_start at a0000001002584f0 #4 [BSP:e00000b071e71440] create_dir at a000000100259350 #5 [BSP:e00000b071e71410] sysfs_create_subdir at a000000100259510 #6 [BSP:e00000b071e713b0] internal_create_group at a00000010025c880 #7 [BSP:e00000b071e71388] sysfs_create_group at a00000010025cc50 #8 [BSP:e00000b071e71368] dpm_sysfs_add at a000000100425050 #9 [BSP:e00000b071e71310] device_add at a000000100417d90 #10 [BSP:e00000b071e712d8] scsi_add_host at a00000010045a380 #11 [BSP:e00000b071e71268] qla2x00_probe_one at a0000002071be950 #12 [BSP:e00000b071e71248] local_pci_probe at a00000010032e490 #13 [BSP:e00000b071e71218] pci_device_probe at a00000010032ecd0 #14 [BSP:e00000b071e711d8] driver_probe_device at a00000010041d480 #15 [BSP:e00000b071e711a8] __driver_attach at a00000010041d6e0 #16 [BSP:e00000b071e71170] bus_for_each_dev at a00000010041c240 #17 [BSP:e00000b071e71150] driver_attach at a00000010041d0a0 #18 [BSP:e00000b071e71108] bus_add_driver at a00000010041b080 #19 [BSP:e00000b071e710c0] driver_register at a00000010041dea0 #20 [BSP:e00000b071e71088] __pci_register_driver at a00000010032f610 #21 [BSP:e00000b071e71058] (unknown) at a000000207200270 #22 [BSP:e00000b071e71018] do_one_initcall at a00000010000a9c0 #23 [BSP:e00000b071e70f98] sys_init_module at a0000001000fef00 #24 [BSP:e00000b071e70f98] ia64_ret_from_syscall at a00000010000c740 So, it appears that qla2xxx dpc thread is moving forward before the scsi host has been completely added. This patch moves the setting of the init_done (and online) flag to after the call to scsi_add_host() to hold off the dpc thread. Found via large lun count testing using 2.6.31. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-02 15:11:16 +00:00
base_vha->flags.init_done = 1;
base_vha->flags.online = 1;
ha->prev_minidump_failed = 0;
[SCSI] qla2xxx: dpc thread can execute before scsi host has been added Fix crash in qla2x00_fdmi_register() due to the dpc thread executing before the scsi host has been fully added. Unable to handle kernel NULL pointer dereference (address 00000000000001d0) qla2xxx_7_dpc[4140]: Oops 8813272891392 [1] Call Trace: [<a000000100016910>] show_stack+0x50/0xa0 sp=e00000b07c59f930 bsp=e00000b07c591400 [<a000000100017180>] show_regs+0x820/0x860 sp=e00000b07c59fb00 bsp=e00000b07c5913a0 [<a00000010003bd60>] die+0x1a0/0x2e0 sp=e00000b07c59fb00 bsp=e00000b07c591360 [<a0000001000681a0>] ia64_do_page_fault+0x8c0/0x9e0 sp=e00000b07c59fb00 bsp=e00000b07c591310 [<a00000010000c8e0>] ia64_native_leave_kernel+0x0/0x270 sp=e00000b07c59fb90 bsp=e00000b07c591310 [<a000000207197350>] qla2x00_fdmi_register+0x850/0xbe0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591290 [<a000000207171570>] qla2x00_configure_loop+0x1930/0x34c0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591128 [<a0000002071732b0>] qla2x00_loop_resync+0x1b0/0x2e0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c5910c0 [<a000000207166d40>] qla2x00_do_dpc+0x9a0/0xce0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c590fa0 [<a0000001000d5bb0>] kthread+0x110/0x140 sp=e00000b07c59fe00 bsp=e00000b07c590f68 [<a000000100014a30>] kernel_thread_helper+0xd0/0x100 sp=e00000b07c59fe30 bsp=e00000b07c590f40 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40 sp=e00000b07c59fe30 bsp=e00000b07c590f40 crash> dis a000000207197350 0xa000000207197350 <qla2x00_fdmi_register+2128>: [MMI] ld1 r45=[r14];; crash> scsi_qla_host.host 0xe00000b058c73ff8 host = 0xe00000b058c73be0, crash> Scsi_Host.shost_data 0xe00000b058c73be0 shost_data = 0x0, <<<<<<<<<<< The fc_transport fc_* workqueue threads have yet to be created. crash> ps | grep _7 3891 2 2 e00000b075c80000 IN 0.0 0 0 [scsi_eh_7] 4140 2 3 e00000b07c590000 RU 0.0 0 0 [qla2xxx_7_dpc] The thread creating adding the Scsi_Host is blocked due to other activity in sysfs. crash> bt 3762 PID: 3762 TASK: e00000b071e70000 CPU: 3 COMMAND: "modprobe" #0 [BSP:e00000b071e71548] schedule at a000000100727e00 #1 [BSP:e00000b071e714c8] __mutex_lock_slowpath at a0000001007295a0 #2 [BSP:e00000b071e714a8] mutex_lock at a000000100729830 #3 [BSP:e00000b071e71478] sysfs_addrm_start at a0000001002584f0 #4 [BSP:e00000b071e71440] create_dir at a000000100259350 #5 [BSP:e00000b071e71410] sysfs_create_subdir at a000000100259510 #6 [BSP:e00000b071e713b0] internal_create_group at a00000010025c880 #7 [BSP:e00000b071e71388] sysfs_create_group at a00000010025cc50 #8 [BSP:e00000b071e71368] dpm_sysfs_add at a000000100425050 #9 [BSP:e00000b071e71310] device_add at a000000100417d90 #10 [BSP:e00000b071e712d8] scsi_add_host at a00000010045a380 #11 [BSP:e00000b071e71268] qla2x00_probe_one at a0000002071be950 #12 [BSP:e00000b071e71248] local_pci_probe at a00000010032e490 #13 [BSP:e00000b071e71218] pci_device_probe at a00000010032ecd0 #14 [BSP:e00000b071e711d8] driver_probe_device at a00000010041d480 #15 [BSP:e00000b071e711a8] __driver_attach at a00000010041d6e0 #16 [BSP:e00000b071e71170] bus_for_each_dev at a00000010041c240 #17 [BSP:e00000b071e71150] driver_attach at a00000010041d0a0 #18 [BSP:e00000b071e71108] bus_add_driver at a00000010041b080 #19 [BSP:e00000b071e710c0] driver_register at a00000010041dea0 #20 [BSP:e00000b071e71088] __pci_register_driver at a00000010032f610 #21 [BSP:e00000b071e71058] (unknown) at a000000207200270 #22 [BSP:e00000b071e71018] do_one_initcall at a00000010000a9c0 #23 [BSP:e00000b071e70f98] sys_init_module at a0000001000fef00 #24 [BSP:e00000b071e70f98] ia64_ret_from_syscall at a00000010000c740 So, it appears that qla2xxx dpc thread is moving forward before the scsi host has been completely added. This patch moves the setting of the init_done (and online) flag to after the call to scsi_add_host() to hold off the dpc thread. Found via large lun count testing using 2.6.31. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-02 15:11:16 +00:00
ql_dbg(ql_dbg_init, base_vha, 0x00f2,
"Init done and hba is online.\n");
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
if (qla_ini_mode_enabled(base_vha) ||
qla_dual_mode_enabled(base_vha))
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
scsi_scan_host(host);
else
ql_dbg(ql_dbg_init, base_vha, 0x0122,
"skipping scsi_scan_host() for non-initiator port\n");
qla2x00_alloc_sysfs_attr(base_vha);
if (IS_QLAFX00(ha)) {
ret = qlafx00_fx_disc(base_vha,
&base_vha->hw->mr.fcport, FXDISC_GET_PORT_INFO);
/* Register system information */
ret = qlafx00_fx_disc(base_vha,
&base_vha->hw->mr.fcport, FXDISC_REG_HOST_INFO);
}
qla2x00_init_host_attr(base_vha);
qla2x00_dfs_setup(base_vha);
ql_log(ql_log_info, base_vha, 0x00fb,
"QLogic %s - %s.\n", ha->model_number, ha->model_desc);
ql_log(ql_log_info, base_vha, 0x00fc,
"ISP%04X: %s @ %s hdma%c host#=%ld fw=%s.\n",
pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info),
pci_name(pdev), ha->flags.enable_64bit_addressing ? '+' : '-',
base_vha->host_no,
ha->isp_ops->fw_version_str(base_vha, fw_str, sizeof(fw_str)));
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_add_target(ha, base_vha);
clear_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags);
if (test_bit(UNLOADING, &base_vha->dpc_flags))
return -ENODEV;
if (ha->flags.detected_lr_sfp) {
ql_log(ql_log_info, base_vha, 0xffff,
"Reset chip to pick up LR SFP setting\n");
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(base_vha);
}
return 0;
probe_init_failed:
qla2x00_free_req_que(ha, req);
ha->req_q_map[0] = NULL;
clear_bit(0, ha->req_qid_map);
qla2x00_free_rsp_que(ha, rsp);
ha->rsp_q_map[0] = NULL;
clear_bit(0, ha->rsp_qid_map);
ha->max_req_queues = ha->max_rsp_queues = 0;
probe_failed:
if (base_vha->timer_active)
qla2x00_stop_timer(base_vha);
base_vha->flags.online = 0;
if (ha->dpc_thread) {
struct task_struct *t = ha->dpc_thread;
ha->dpc_thread = NULL;
kthread_stop(t);
}
qla2x00_free_device(base_vha);
scsi_host_put(base_vha->host);
probe_hw_failed:
qla2x00_clear_drv_active(ha);
iospace_config_failed:
if (IS_P3P_TYPE(ha)) {
if (!ha->nx_pcibase)
iounmap((device_reg_t *)ha->nx_pcibase);
if (!ql2xdbwr)
iounmap((device_reg_t *)ha->nxdb_wr_ptr);
} else {
if (ha->iobase)
iounmap(ha->iobase);
if (ha->cregbase)
iounmap(ha->cregbase);
}
pci_release_selected_regions(ha->pdev, ha->bars);
kfree(ha);
disable_device:
pci_disable_device(pdev);
return ret;
}
static void
qla2x00_shutdown(struct pci_dev *pdev)
{
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
vha = pci_get_drvdata(pdev);
ha = vha->hw;
ql_log(ql_log_info, vha, 0xfffa,
"Adapter shutdown\n");
/*
* Prevent future board_disable and wait
* until any pending board_disable has completed.
*/
set_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags);
cancel_work_sync(&ha->board_disable);
if (!atomic_read(&pdev->enable_cnt))
return;
/* Notify ISPFX00 firmware */
if (IS_QLAFX00(ha))
qlafx00_driver_shutdown(vha, 20);
/* Turn-off FCE trace */
if (ha->flags.fce_enabled) {
qla2x00_disable_fce_trace(vha, NULL, NULL);
ha->flags.fce_enabled = 0;
}
/* Turn-off EFT trace */
if (ha->eft)
qla2x00_disable_eft_trace(vha);
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
/* Turn adapter off line */
vha->flags.online = 0;
/* turn-off interrupts on the card */
if (ha->interrupts_on) {
vha->flags.init_done = 0;
ha->isp_ops->disable_intrs(ha);
}
qla2x00_free_irqs(vha);
qla2x00_free_fw_dump(ha);
pci_disable_device(pdev);
ql_log(ql_log_info, vha, 0xfffe,
"Adapter shutdown successfully.\n");
}
/* Deletes all the virtual ports for a given ha */
static void
qla2x00_delete_all_vps(struct qla_hw_data *ha, scsi_qla_host_t *base_vha)
{
scsi_qla_host_t *vha;
unsigned long flags;
mutex_lock(&ha->vport_lock);
while (ha->cur_vport_count) {
spin_lock_irqsave(&ha->vport_slock, flags);
BUG_ON(base_vha->list.next == &ha->vp_list);
/* This assumes first entry in ha->vp_list is always base vha */
vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list);
scsi_host_get(vha->host);
spin_unlock_irqrestore(&ha->vport_slock, flags);
mutex_unlock(&ha->vport_lock);
fc_vport_terminate(vha->fc_vport);
scsi_host_put(vha->host);
mutex_lock(&ha->vport_lock);
}
mutex_unlock(&ha->vport_lock);
}
/* Stops all deferred work threads */
static void
qla2x00_destroy_deferred_work(struct qla_hw_data *ha)
{
/* Cancel all work and destroy DPC workqueues */
if (ha->dpc_lp_wq) {
cancel_work_sync(&ha->idc_aen);
destroy_workqueue(ha->dpc_lp_wq);
ha->dpc_lp_wq = NULL;
}
if (ha->dpc_hp_wq) {
cancel_work_sync(&ha->nic_core_reset);
cancel_work_sync(&ha->idc_state_handler);
cancel_work_sync(&ha->nic_core_unrecoverable);
destroy_workqueue(ha->dpc_hp_wq);
ha->dpc_hp_wq = NULL;
}
/* Kill the kernel thread for this host */
if (ha->dpc_thread) {
struct task_struct *t = ha->dpc_thread;
/*
* qla2xxx_wake_dpc checks for ->dpc_thread
* so we need to zero it out.
*/
ha->dpc_thread = NULL;
kthread_stop(t);
}
}
static void
qla2x00_unmap_iobases(struct qla_hw_data *ha)
{
if (IS_QLA82XX(ha)) {
iounmap((device_reg_t *)ha->nx_pcibase);
if (!ql2xdbwr)
iounmap((device_reg_t *)ha->nxdb_wr_ptr);
} else {
if (ha->iobase)
iounmap(ha->iobase);
if (ha->cregbase)
iounmap(ha->cregbase);
if (ha->mqiobase)
iounmap(ha->mqiobase);
if ((IS_QLA83XX(ha) || IS_QLA27XX(ha)) && ha->msixbase)
iounmap(ha->msixbase);
}
}
static void
qla2x00_clear_drv_active(struct qla_hw_data *ha)
{
if (IS_QLA8044(ha)) {
qla8044_idc_lock(ha);
qla8044_clear_drv_active(ha);
qla8044_idc_unlock(ha);
} else if (IS_QLA82XX(ha)) {
qla82xx_idc_lock(ha);
qla82xx_clear_drv_active(ha);
qla82xx_idc_unlock(ha);
}
}
static void
qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *base_vha;
struct qla_hw_data *ha;
base_vha = pci_get_drvdata(pdev);
ha = base_vha->hw;
/* Indicate device removal to prevent future board_disable and wait
* until any pending board_disable has completed. */
set_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags);
cancel_work_sync(&ha->board_disable);
/*
* If the PCI device is disabled then there was a PCI-disconnect and
* qla2x00_disable_board_on_pci_error has taken care of most of the
* resources.
*/
if (!atomic_read(&pdev->enable_cnt)) {
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size,
base_vha->gnl.l, base_vha->gnl.ldma);
scsi_host_put(base_vha->host);
kfree(ha);
pci_set_drvdata(pdev, NULL);
return;
}
qla2x00_wait_for_hba_ready(base_vha);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
/*
* if UNLOAD flag is already set, then continue unload,
* where it was set first.
*/
if (test_bit(UNLOADING, &base_vha->dpc_flags))
return;
set_bit(UNLOADING, &base_vha->dpc_flags);
qla_nvme_delete(base_vha);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
dma_free_coherent(&ha->pdev->dev,
base_vha->gnl.size, base_vha->gnl.l, base_vha->gnl.ldma);
if (IS_QLAFX00(ha))
qlafx00_driver_shutdown(base_vha, 20);
qla2x00_delete_all_vps(ha, base_vha);
if (IS_QLA8031(ha)) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb07e,
"Clearing fcoe driver presence.\n");
if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS)
ql_dbg(ql_dbg_p3p, base_vha, 0xb079,
"Error while clearing DRV-Presence.\n");
}
qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
qla2x00_dfs_remove(base_vha);
qla84xx_put_chip(base_vha);
/* Laser should be disabled only for ISP2031 */
if (IS_QLA2031(ha))
qla83xx_disable_laser(base_vha);
/* Disable timer */
if (base_vha->timer_active)
qla2x00_stop_timer(base_vha);
base_vha->flags.online = 0;
/* free DMA memory */
if (ha->exlogin_buf)
qla2x00_free_exlogin_buffer(ha);
/* free DMA memory */
if (ha->exchoffld_buf)
qla2x00_free_exchoffld_buffer(ha);
qla2x00_destroy_deferred_work(ha);
qlt_remove_target(ha, base_vha);
qla2x00_free_sysfs_attr(base_vha, true);
fc_remove_host(base_vha->host);
qlt_remove_target_resources(ha);
scsi_remove_host(base_vha->host);
qla2x00_free_device(base_vha);
qla2x00_clear_drv_active(ha);
scsi_host_put(base_vha->host);
qla2x00_unmap_iobases(ha);
pci_release_selected_regions(ha->pdev, ha->bars);
kfree(ha);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
}
static void
qla2x00_free_device(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
/* Disable timer */
if (vha->timer_active)
qla2x00_stop_timer(vha);
qla25xx_delete_queues(vha);
if (ha->flags.fce_enabled)
qla2x00_disable_fce_trace(vha, NULL, NULL);
if (ha->eft)
qla2x00_disable_eft_trace(vha);
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
vha->flags.online = 0;
/* turn-off interrupts on the card */
if (ha->interrupts_on) {
vha->flags.init_done = 0;
ha->isp_ops->disable_intrs(ha);
}
qla2x00_free_fcports(vha);
qla2x00_free_irqs(vha);
/* Flush the work queue and remove it */
if (ha->wq) {
flush_workqueue(ha->wq);
destroy_workqueue(ha->wq);
ha->wq = NULL;
}
qla2x00_mem_free(ha);
qla82xx_md_free(vha);
qla2x00_free_queues(ha);
}
void qla2x00_free_fcports(struct scsi_qla_host *vha)
{
fc_port_t *fcport, *tfcport;
list_for_each_entry_safe(fcport, tfcport, &vha->vp_fcports, list) {
list_del(&fcport->list);
qla2x00_clear_loop_id(fcport);
kfree(fcport);
}
}
static inline void
qla2x00_schedule_rport_del(struct scsi_qla_host *vha, fc_port_t *fcport,
int defer)
{
struct fc_rport *rport;
scsi_qla_host_t *base_vha;
unsigned long flags;
if (!fcport->rport)
return;
rport = fcport->rport;
if (defer) {
base_vha = pci_get_drvdata(vha->hw->pdev);
spin_lock_irqsave(vha->host->host_lock, flags);
fcport->drport = rport;
spin_unlock_irqrestore(vha->host->host_lock, flags);
qlt_do_generation_tick(vha, &base_vha->total_fcport_update_gen);
set_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(base_vha);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
} else {
int now;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
if (rport) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x2109,
"%s %8phN. rport %p roles %x\n",
__func__, fcport->port_name, rport,
rport->roles);
fc_remote_port_delete(rport);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
}
qlt_do_generation_tick(vha, &now);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
}
}
/*
* qla2x00_mark_device_lost Updates fcport state when device goes offline.
*
* Input: ha = adapter block pointer. fcport = port structure pointer.
*
* Return: None.
*
* Context:
*/
void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
int do_login, int defer)
{
if (IS_QLAFX00(vha->hw)) {
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
qla2x00_schedule_rport_del(vha, fcport, defer);
return;
}
if (atomic_read(&fcport->state) == FCS_ONLINE &&
vha->vp_idx == fcport->vha->vp_idx) {
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
qla2x00_schedule_rport_del(vha, fcport, defer);
}
/*
* We may need to retry the login, so don't change the state of the
* port but do the retries.
*/
if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
if (!do_login)
return;
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
if (fcport->login_retry == 0) {
fcport->login_retry = vha->hw->login_retry_count;
ql_dbg(ql_dbg_disc, vha, 0x20a3,
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
"Port login retry %8phN, lid 0x%04x retry cnt=%d.\n",
fcport->port_name, fcport->loop_id, fcport->login_retry);
}
}
/*
* qla2x00_mark_all_devices_lost
* Updates fcport state when device goes offline.
*
* Input:
* ha = adapter block pointer.
* fcport = port structure pointer.
*
* Return:
* None.
*
* Context:
*/
void
qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer)
{
fc_port_t *fcport;
ql_dbg(ql_dbg_disc, vha, 0x20f1,
"Mark all dev lost\n");
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
list_for_each_entry(fcport, &vha->vp_fcports, list) {
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
fcport->scan_state = 0;
qlt_schedule_sess_for_deletion_lock(fcport);
if (vha->vp_idx != 0 && vha->vp_idx != fcport->vha->vp_idx)
continue;
/*
* No point in marking the device as lost, if the device is
* already DEAD.
*/
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
continue;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
if (defer)
qla2x00_schedule_rport_del(vha, fcport, defer);
else if (vha->vp_idx == fcport->vha->vp_idx)
qla2x00_schedule_rport_del(vha, fcport, defer);
}
}
}
/*
* qla2x00_mem_alloc
* Allocates adapter memory.
*
* Returns:
* 0 = success.
* !0 = failure.
*/
static int
qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
struct req_que **req, struct rsp_que **rsp)
{
char name[16];
ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
&ha->init_cb_dma, GFP_KERNEL);
if (!ha->init_cb)
goto fail;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
if (qlt_mem_alloc(ha) < 0)
goto fail_free_init_cb;
ha->gid_list = dma_alloc_coherent(&ha->pdev->dev,
qla2x00_gid_list_size(ha), &ha->gid_list_dma, GFP_KERNEL);
if (!ha->gid_list)
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
goto fail_free_tgt_mem;
ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
if (!ha->srb_mempool)
goto fail_free_gid_list;
if (IS_P3P_TYPE(ha)) {
/* Allocate cache for CT6 Ctx. */
if (!ctx_cachep) {
ctx_cachep = kmem_cache_create("qla2xxx_ctx",
sizeof(struct ct6_dsd), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (!ctx_cachep)
goto fail_free_srb_mempool;
}
ha->ctx_mempool = mempool_create_slab_pool(SRB_MIN_REQ,
ctx_cachep);
if (!ha->ctx_mempool)
goto fail_free_srb_mempool;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0021,
"ctx_cachep=%p ctx_mempool=%p.\n",
ctx_cachep, ha->ctx_mempool);
}
/* Get memory for cached NVRAM */
ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL);
if (!ha->nvram)
goto fail_free_ctx_mempool;
snprintf(name, sizeof(name), "%s_%d", QLA2XXX_DRIVER_NAME,
ha->pdev->device);
ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
DMA_POOL_SIZE, 8, 0);
if (!ha->s_dma_pool)
goto fail_free_nvram;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0022,
"init_cb=%p gid_list=%p, srb_mempool=%p s_dma_pool=%p.\n",
ha->init_cb, ha->gid_list, ha->srb_mempool, ha->s_dma_pool);
if (IS_P3P_TYPE(ha) || ql2xenabledif) {
ha->dl_dma_pool = dma_pool_create(name, &ha->pdev->dev,
DSD_LIST_DMA_POOL_SIZE, 8, 0);
if (!ha->dl_dma_pool) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0023,
"Failed to allocate memory for dl_dma_pool.\n");
goto fail_s_dma_pool;
}
ha->fcp_cmnd_dma_pool = dma_pool_create(name, &ha->pdev->dev,
FCP_CMND_DMA_POOL_SIZE, 8, 0);
if (!ha->fcp_cmnd_dma_pool) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0024,
"Failed to allocate memory for fcp_cmnd_dma_pool.\n");
goto fail_dl_dma_pool;
}
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0025,
"dl_dma_pool=%p fcp_cmnd_dma_pool=%p.\n",
ha->dl_dma_pool, ha->fcp_cmnd_dma_pool);
}
/* Allocate memory for SNS commands */
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
/* Get consistent memory allocated for SNS commands */
ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
if (!ha->sns_cmd)
goto fail_dma_pool;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0026,
"sns_cmd: %p.\n", ha->sns_cmd);
} else {
/* Get consistent memory allocated for MS IOCB */
ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->ms_iocb_dma);
if (!ha->ms_iocb)
goto fail_dma_pool;
/* Get consistent memory allocated for CT SNS commands */
ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
if (!ha->ct_sns)
goto fail_free_ms_iocb;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0027,
"ms_iocb=%p ct_sns=%p.\n",
ha->ms_iocb, ha->ct_sns);
}
/* Allocate memory for request ring */
*req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
if (!*req) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0028,
"Failed to allocate memory for req.\n");
goto fail_req;
}
(*req)->length = req_len;
(*req)->ring = dma_alloc_coherent(&ha->pdev->dev,
((*req)->length + 1) * sizeof(request_t),
&(*req)->dma, GFP_KERNEL);
if (!(*req)->ring) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0029,
"Failed to allocate memory for req_ring.\n");
goto fail_req_ring;
}
/* Allocate memory for response ring */
*rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL);
if (!*rsp) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x002a,
"Failed to allocate memory for rsp.\n");
goto fail_rsp;
}
(*rsp)->hw = ha;
(*rsp)->length = rsp_len;
(*rsp)->ring = dma_alloc_coherent(&ha->pdev->dev,
((*rsp)->length + 1) * sizeof(response_t),
&(*rsp)->dma, GFP_KERNEL);
if (!(*rsp)->ring) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x002b,
"Failed to allocate memory for rsp_ring.\n");
goto fail_rsp_ring;
}
(*req)->rsp = *rsp;
(*rsp)->req = *req;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002c,
"req=%p req->length=%d req->ring=%p rsp=%p "
"rsp->length=%d rsp->ring=%p.\n",
*req, (*req)->length, (*req)->ring, *rsp, (*rsp)->length,
(*rsp)->ring);
/* Allocate memory for NVRAM data for vports */
if (ha->nvram_npiv_size) {
ha->npiv_info = kzalloc(sizeof(struct qla_npiv_entry) *
ha->nvram_npiv_size, GFP_KERNEL);
if (!ha->npiv_info) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x002d,
"Failed to allocate memory for npiv_info.\n");
goto fail_npiv_info;
}
} else
ha->npiv_info = NULL;
/* Get consistent memory allocated for EX-INIT-CB. */
if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha)) {
ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->ex_init_cb_dma);
if (!ha->ex_init_cb)
goto fail_ex_init_cb;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002e,
"ex_init_cb=%p.\n", ha->ex_init_cb);
}
INIT_LIST_HEAD(&ha->gbl_dsd_list);
/* Get consistent memory allocated for Async Port-Database. */
if (!IS_FWI2_CAPABLE(ha)) {
ha->async_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->async_pd_dma);
if (!ha->async_pd)
goto fail_async_pd;
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002f,
"async_pd=%p.\n", ha->async_pd);
}
INIT_LIST_HEAD(&ha->vp_list);
/* Allocate memory for our loop_id bitmap */
ha->loop_id_map = kzalloc(BITS_TO_LONGS(LOOPID_MAP_SIZE) * sizeof(long),
GFP_KERNEL);
if (!ha->loop_id_map)
goto fail_loop_id_map;
else {
qla2x00_set_reserved_loop_ids(ha);
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0123,
"loop_id_map=%p.\n", ha->loop_id_map);
}
ha->sfp_data = dma_alloc_coherent(&ha->pdev->dev,
SFP_DEV_SIZE, &ha->sfp_data_dma, GFP_KERNEL);
if (!ha->sfp_data) {
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b,
"Unable to allocate memory for SFP read-data.\n");
goto fail_sfp_data;
}
return 0;
fail_sfp_data:
kfree(ha->loop_id_map);
fail_loop_id_map:
dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma);
fail_async_pd:
dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma);
fail_ex_init_cb:
kfree(ha->npiv_info);
fail_npiv_info:
dma_free_coherent(&ha->pdev->dev, ((*rsp)->length + 1) *
sizeof(response_t), (*rsp)->ring, (*rsp)->dma);
(*rsp)->ring = NULL;
(*rsp)->dma = 0;
fail_rsp_ring:
kfree(*rsp);
fail_rsp:
dma_free_coherent(&ha->pdev->dev, ((*req)->length + 1) *
sizeof(request_t), (*req)->ring, (*req)->dma);
(*req)->ring = NULL;
(*req)->dma = 0;
fail_req_ring:
kfree(*req);
fail_req:
dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
ha->ct_sns, ha->ct_sns_dma);
ha->ct_sns = NULL;
ha->ct_sns_dma = 0;
fail_free_ms_iocb:
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
ha->ms_iocb = NULL;
ha->ms_iocb_dma = 0;
if (ha->sns_cmd)
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
ha->sns_cmd, ha->sns_cmd_dma);
fail_dma_pool:
if (IS_QLA82XX(ha) || ql2xenabledif) {
dma_pool_destroy(ha->fcp_cmnd_dma_pool);
ha->fcp_cmnd_dma_pool = NULL;
}
fail_dl_dma_pool:
if (IS_QLA82XX(ha) || ql2xenabledif) {
dma_pool_destroy(ha->dl_dma_pool);
ha->dl_dma_pool = NULL;
}
fail_s_dma_pool:
dma_pool_destroy(ha->s_dma_pool);
ha->s_dma_pool = NULL;
fail_free_nvram:
kfree(ha->nvram);
ha->nvram = NULL;
fail_free_ctx_mempool:
if (ha->ctx_mempool)
mempool_destroy(ha->ctx_mempool);
ha->ctx_mempool = NULL;
fail_free_srb_mempool:
if (ha->srb_mempool)
mempool_destroy(ha->srb_mempool);
ha->srb_mempool = NULL;
fail_free_gid_list:
dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha),
ha->gid_list,
ha->gid_list_dma);
ha->gid_list = NULL;
ha->gid_list_dma = 0;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
fail_free_tgt_mem:
qlt_mem_free(ha);
fail_free_init_cb:
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
ha->init_cb_dma);
ha->init_cb = NULL;
ha->init_cb_dma = 0;
fail:
ql_log(ql_log_fatal, NULL, 0x0030,
"Memory allocation failure.\n");
return -ENOMEM;
}
int
qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
{
int rval;
uint16_t size, max_cnt, temp;
struct qla_hw_data *ha = vha->hw;
/* Return if we don't need to alloacate any extended logins */
if (!ql2xexlogins)
return QLA_SUCCESS;
if (!IS_EXLOGIN_OFFLD_CAPABLE(ha))
return QLA_SUCCESS;
ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins);
max_cnt = 0;
rval = qla_get_exlogin_status(vha, &size, &max_cnt);
if (rval != QLA_SUCCESS) {
ql_log_pci(ql_log_fatal, ha->pdev, 0xd029,
"Failed to get exlogin status.\n");
return rval;
}
temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins;
temp *= size;
if (temp != ha->exlogin_size) {
qla2x00_free_exlogin_buffer(ha);
ha->exlogin_size = temp;
ql_log(ql_log_info, vha, 0xd024,
"EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
max_cnt, size, temp);
ql_log(ql_log_info, vha, 0xd025,
"EXLOGIN: requested size=0x%x\n", ha->exlogin_size);
/* Get consistent memory for extended logins */
ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
if (!ha->exlogin_buf) {
ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
"Failed to allocate memory for exlogin_buf_dma.\n");
return -ENOMEM;
}
}
/* Now configure the dma buffer */
rval = qla_set_exlogin_mem_cfg(vha, ha->exlogin_buf_dma);
if (rval) {
ql_log(ql_log_fatal, vha, 0xd033,
"Setup extended login buffer ****FAILED****.\n");
qla2x00_free_exlogin_buffer(ha);
}
return rval;
}
/*
* qla2x00_free_exlogin_buffer
*
* Input:
* ha = adapter block pointer
*/
void
qla2x00_free_exlogin_buffer(struct qla_hw_data *ha)
{
if (ha->exlogin_buf) {
dma_free_coherent(&ha->pdev->dev, ha->exlogin_size,
ha->exlogin_buf, ha->exlogin_buf_dma);
ha->exlogin_buf = NULL;
ha->exlogin_size = 0;
}
}
static void
qla2x00_number_of_exch(scsi_qla_host_t *vha, u32 *ret_cnt, u16 max_cnt)
{
u32 temp;
*ret_cnt = FW_DEF_EXCHANGES_CNT;
if (qla_ini_mode_enabled(vha)) {
if (ql2xiniexchg > max_cnt)
ql2xiniexchg = max_cnt;
if (ql2xiniexchg > FW_DEF_EXCHANGES_CNT)
*ret_cnt = ql2xiniexchg;
} else if (qla_tgt_mode_enabled(vha)) {
if (ql2xexchoffld > max_cnt)
ql2xexchoffld = max_cnt;
if (ql2xexchoffld > FW_DEF_EXCHANGES_CNT)
*ret_cnt = ql2xexchoffld;
} else if (qla_dual_mode_enabled(vha)) {
temp = ql2xiniexchg + ql2xexchoffld;
if (temp > max_cnt) {
ql2xiniexchg -= (temp - max_cnt)/2;
ql2xexchoffld -= (((temp - max_cnt)/2) + 1);
temp = max_cnt;
}
if (temp > FW_DEF_EXCHANGES_CNT)
*ret_cnt = temp;
}
}
int
qla2x00_set_exchoffld_buffer(scsi_qla_host_t *vha)
{
int rval;
u16 size, max_cnt;
u32 temp;
struct qla_hw_data *ha = vha->hw;
if (!ha->flags.exchoffld_enabled)
return QLA_SUCCESS;
if (!IS_EXCHG_OFFLD_CAPABLE(ha))
return QLA_SUCCESS;
max_cnt = 0;
rval = qla_get_exchoffld_status(vha, &size, &max_cnt);
if (rval != QLA_SUCCESS) {
ql_log_pci(ql_log_fatal, ha->pdev, 0xd012,
"Failed to get exlogin status.\n");
return rval;
}
qla2x00_number_of_exch(vha, &temp, max_cnt);
temp *= size;
if (temp != ha->exchoffld_size) {
qla2x00_free_exchoffld_buffer(ha);
ha->exchoffld_size = temp;
ql_log(ql_log_info, vha, 0xd016,
"Exchange offload: max_count=%d, buffers=0x%x, total=%d.\n",
max_cnt, size, temp);
ql_log(ql_log_info, vha, 0xd017,
"Exchange Buffers requested size = 0x%x\n",
ha->exchoffld_size);
/* Get consistent memory for extended logins */
ha->exchoffld_buf = dma_alloc_coherent(&ha->pdev->dev,
ha->exchoffld_size, &ha->exchoffld_buf_dma, GFP_KERNEL);
if (!ha->exchoffld_buf) {
ql_log_pci(ql_log_fatal, ha->pdev, 0xd013,
"Failed to allocate memory for exchoffld_buf_dma.\n");
return -ENOMEM;
}
}
/* Now configure the dma buffer */
rval = qla_set_exchoffld_mem_cfg(vha);
if (rval) {
ql_log(ql_log_fatal, vha, 0xd02e,
"Setup exchange offload buffer ****FAILED****.\n");
qla2x00_free_exchoffld_buffer(ha);
} else {
/* re-adjust number of target exchange */
struct init_cb_81xx *icb = (struct init_cb_81xx *)ha->init_cb;
if (qla_ini_mode_enabled(vha))
icb->exchange_count = 0;
else
icb->exchange_count = cpu_to_le16(ql2xexchoffld);
}
return rval;
}
/*
* qla2x00_free_exchoffld_buffer
*
* Input:
* ha = adapter block pointer
*/
void
qla2x00_free_exchoffld_buffer(struct qla_hw_data *ha)
{
if (ha->exchoffld_buf) {
dma_free_coherent(&ha->pdev->dev, ha->exchoffld_size,
ha->exchoffld_buf, ha->exchoffld_buf_dma);
ha->exchoffld_buf = NULL;
ha->exchoffld_size = 0;
}
}
/*
* qla2x00_free_fw_dump
* Frees fw dump stuff.
*
* Input:
* ha = adapter block pointer
*/
static void
qla2x00_free_fw_dump(struct qla_hw_data *ha)
{
if (ha->fce)
dma_free_coherent(&ha->pdev->dev,
FCE_SIZE, ha->fce, ha->fce_dma);
if (ha->eft)
dma_free_coherent(&ha->pdev->dev,
EFT_SIZE, ha->eft, ha->eft_dma);
if (ha->fw_dump)
vfree(ha->fw_dump);
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fce = NULL;
ha->fce_dma = 0;
ha->eft = NULL;
ha->eft_dma = 0;
ha->fw_dumped = 0;
ha->fw_dump_cap_flags = 0;
ha->fw_dump_reading = 0;
ha->fw_dump = NULL;
ha->fw_dump_len = 0;
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
}
/*
* qla2x00_mem_free
* Frees all adapter allocated memory.
*
* Input:
* ha = adapter block pointer.
*/
static void
qla2x00_mem_free(struct qla_hw_data *ha)
{
qla2x00_free_fw_dump(ha);
if (ha->mctp_dump)
dma_free_coherent(&ha->pdev->dev, MCTP_DUMP_SIZE, ha->mctp_dump,
ha->mctp_dump_dma);
if (ha->srb_mempool)
mempool_destroy(ha->srb_mempool);
if (ha->dcbx_tlv)
dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
ha->dcbx_tlv, ha->dcbx_tlv_dma);
if (ha->xgmac_data)
dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
ha->xgmac_data, ha->xgmac_data_dma);
if (ha->sns_cmd)
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
ha->sns_cmd, ha->sns_cmd_dma);
if (ha->ct_sns)
dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
ha->ct_sns, ha->ct_sns_dma);
if (ha->sfp_data)
dma_free_coherent(&ha->pdev->dev, SFP_DEV_SIZE, ha->sfp_data,
ha->sfp_data_dma);
if (ha->ms_iocb)
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
if (ha->ex_init_cb)
dma_pool_free(ha->s_dma_pool,
ha->ex_init_cb, ha->ex_init_cb_dma);
if (ha->async_pd)
dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma);
if (ha->s_dma_pool)
dma_pool_destroy(ha->s_dma_pool);
if (ha->gid_list)
dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha),
ha->gid_list, ha->gid_list_dma);
if (IS_QLA82XX(ha)) {
if (!list_empty(&ha->gbl_dsd_list)) {
struct dsd_dma *dsd_ptr, *tdsd_ptr;
/* clean up allocated prev pool */
list_for_each_entry_safe(dsd_ptr,
tdsd_ptr, &ha->gbl_dsd_list, list) {
dma_pool_free(ha->dl_dma_pool,
dsd_ptr->dsd_addr, dsd_ptr->dsd_list_dma);
list_del(&dsd_ptr->list);
kfree(dsd_ptr);
}
}
}
if (ha->dl_dma_pool)
dma_pool_destroy(ha->dl_dma_pool);
if (ha->fcp_cmnd_dma_pool)
dma_pool_destroy(ha->fcp_cmnd_dma_pool);
if (ha->ctx_mempool)
mempool_destroy(ha->ctx_mempool);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_mem_free(ha);
if (ha->init_cb)
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
ha->init_cb, ha->init_cb_dma);
vfree(ha->optrom_buffer);
kfree(ha->nvram);
kfree(ha->npiv_info);
kfree(ha->swl);
kfree(ha->loop_id_map);
ha->srb_mempool = NULL;
ha->ctx_mempool = NULL;
ha->sns_cmd = NULL;
ha->sns_cmd_dma = 0;
ha->ct_sns = NULL;
ha->ct_sns_dma = 0;
ha->ms_iocb = NULL;
ha->ms_iocb_dma = 0;
ha->init_cb = NULL;
ha->init_cb_dma = 0;
ha->ex_init_cb = NULL;
ha->ex_init_cb_dma = 0;
ha->async_pd = NULL;
ha->async_pd_dma = 0;
ha->s_dma_pool = NULL;
ha->dl_dma_pool = NULL;
ha->fcp_cmnd_dma_pool = NULL;
ha->gid_list = NULL;
ha->gid_list_dma = 0;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
ha->tgt.atio_ring = NULL;
ha->tgt.atio_dma = 0;
ha->tgt.tgt_vp_map = NULL;
}
struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
struct qla_hw_data *ha)
{
struct Scsi_Host *host;
struct scsi_qla_host *vha = NULL;
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (!host) {
ql_log_pci(ql_log_fatal, ha->pdev, 0x0107,
"Failed to allocate host from the scsi layer, aborting.\n");
return NULL;
}
/* Clear our data area */
vha = shost_priv(host);
memset(vha, 0, sizeof(scsi_qla_host_t));
vha->host = host;
vha->host_no = host->host_no;
vha->hw = ha;
INIT_LIST_HEAD(&vha->vp_fcports);
INIT_LIST_HEAD(&vha->work_list);
INIT_LIST_HEAD(&vha->list);
INIT_LIST_HEAD(&vha->qla_cmd_list);
INIT_LIST_HEAD(&vha->qla_sess_op_cmd_list);
qla2xxx: Delete session if initiator is gone from FW 1. Initiator A is logged in with fc_id(1)/loop_id(1) 2. Initiator A re-logs in with fc_id(2)/loop_id(2) 3. Part of old session deletion async logoout for 1/1 is queued 4. Initiator B logs in with fc_id(1)/loop_id(1), starts passing data and creates session. 5. Async logo from 3 is processed by DPC and sent to FW Now initiator B has the session but is logged out from FW. This condition is detected first with CTIO error 29 at which point we should delete current session. During session deletion we will send LOGO to initiator to force re-login. Under rare circumstances initiator might be logged out of FW, not have driver session, but still think it's logged in. E.g. the above sequence plus session deletion due to re-config. Incoming commands will fail to create local session because initiator is not found in FW. In this case we also issue LOGO to initiator to force him re-login. Finally this patch fixes exchange leak when commands where received in logged out state. In this case loop_id must be set to FFFF when corresponding exchange is terminated. The patch modifies exchange termination to always use FFFF, since in certain scenarios it's impossible to tell whether command was received in logged in or logged out state. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-17 19:57:01 +00:00
INIT_LIST_HEAD(&vha->logo_list);
INIT_LIST_HEAD(&vha->plogi_ack_list);
INIT_LIST_HEAD(&vha->qp_list);
INIT_LIST_HEAD(&vha->gnl.fcports);
INIT_LIST_HEAD(&vha->nvme_rport_list);
spin_lock_init(&vha->work_lock);
spin_lock_init(&vha->cmd_list_lock);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
init_waitqueue_head(&vha->fcport_waitQ);
init_waitqueue_head(&vha->vref_waitq);
vha->gnl.size = sizeof(struct get_name_list_extended) *
(ha->max_loop_id + 1);
vha->gnl.l = dma_alloc_coherent(&ha->pdev->dev,
vha->gnl.size, &vha->gnl.ldma, GFP_KERNEL);
if (!vha->gnl.l) {
ql_log(ql_log_fatal, vha, 0xd04a,
"Alloc failed for name list.\n");
scsi_remove_host(vha->host);
return NULL;
}
sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
ql_dbg(ql_dbg_init, vha, 0x0041,
"Allocated the host=%p hw=%p vha=%p dev_name=%s",
vha->host, vha->hw, vha,
dev_name(&(ha->pdev->dev)));
return vha;
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
struct qla_work_evt *
qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
{
struct qla_work_evt *e;
uint8_t bail;
QLA_VHA_MARK_BUSY(vha, bail);
if (bail)
return NULL;
e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
if (!e) {
QLA_VHA_MARK_NOT_BUSY(vha);
return NULL;
}
INIT_LIST_HEAD(&e->list);
e->type = type;
e->flags = QLA_EVT_FLAG_FREE;
return e;
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
int
qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
{
unsigned long flags;
spin_lock_irqsave(&vha->work_lock, flags);
list_add_tail(&e->list, &vha->work_list);
spin_unlock_irqrestore(&vha->work_lock, flags);
if (QLA_EARLY_LINKUP(vha->hw))
schedule_work(&vha->iocb_work);
else
qla2xxx_wake_dpc(vha);
return QLA_SUCCESS;
}
int
qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
u32 data)
{
struct qla_work_evt *e;
e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
if (!e)
return QLA_FUNCTION_FAILED;
e->u.aen.code = code;
e->u.aen.data = data;
return qla2x00_post_work(vha, e);
}
int
qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
{
struct qla_work_evt *e;
e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
if (!e)
return QLA_FUNCTION_FAILED;
memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
return qla2x00_post_work(vha, e);
}
#define qla2x00_post_async_work(name, type) \
int qla2x00_post_async_##name##_work( \
struct scsi_qla_host *vha, \
fc_port_t *fcport, uint16_t *data) \
{ \
struct qla_work_evt *e; \
\
e = qla2x00_alloc_work(vha, type); \
if (!e) \
return QLA_FUNCTION_FAILED; \
\
e->u.logio.fcport = fcport; \
if (data) { \
e->u.logio.data[0] = data[0]; \
e->u.logio.data[1] = data[1]; \
} \
return qla2x00_post_work(vha, e); \
}
qla2x00_post_async_work(login, QLA_EVT_ASYNC_LOGIN);
qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT);
qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE);
qla2x00_post_async_work(adisc, QLA_EVT_ASYNC_ADISC);
qla2x00_post_async_work(adisc_done, QLA_EVT_ASYNC_ADISC_DONE);
int
qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)
{
struct qla_work_evt *e;
e = qla2x00_alloc_work(vha, QLA_EVT_UEVENT);
if (!e)
return QLA_FUNCTION_FAILED;
e->u.uevent.code = code;
return qla2x00_post_work(vha, e);
}
static void
qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)
{
char event_string[40];
char *envp[] = { event_string, NULL };
switch (code) {
case QLA_UEVENT_CODE_FW_DUMP:
snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld",
vha->host_no);
break;
default:
/* do nothing */
break;
}
kobject_uevent_env(&vha->hw->pdev->dev.kobj, KOBJ_CHANGE, envp);
}
int
qlafx00_post_aenfx_work(struct scsi_qla_host *vha, uint32_t evtcode,
uint32_t *data, int cnt)
{
struct qla_work_evt *e;
e = qla2x00_alloc_work(vha, QLA_EVT_AENFX);
if (!e)
return QLA_FUNCTION_FAILED;
e->u.aenfx.evtcode = evtcode;
e->u.aenfx.count = cnt;
memcpy(e->u.aenfx.mbx, data, sizeof(*data) * cnt);
return qla2x00_post_work(vha, e);
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
int qla24xx_post_upd_fcport_work(struct scsi_qla_host *vha, fc_port_t *fcport)
{
struct qla_work_evt *e;
e = qla2x00_alloc_work(vha, QLA_EVT_UPD_FCPORT);
if (!e)
return QLA_FUNCTION_FAILED;
e->u.fcport.fcport = fcport;
return qla2x00_post_work(vha, e);
}
static
void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
{
unsigned long flags;
fc_port_t *fcport = NULL, *tfcp;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
struct qlt_plogi_ack_t *pla =
(struct qlt_plogi_ack_t *)e->u.new_sess.pla;
uint8_t free_fcport = 0;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
fcport = qla2x00_find_fcport_by_wwpn(vha, e->u.new_sess.port_name, 1);
if (fcport) {
fcport->d_id = e->u.new_sess.id;
if (pla) {
fcport->fw_login_state = DSC_LS_PLOGI_PEND;
qlt_plogi_ack_link(vha, pla, fcport, QLT_PLOGI_LINK_SAME_WWN);
/* we took an extra ref_count to prevent PLOGI ACK when
* fcport/sess has not been created.
*/
pla->ref_count--;
}
} else {
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (fcport) {
fcport->d_id = e->u.new_sess.id;
fcport->scan_state = QLA_FCPORT_FOUND;
fcport->flags |= FCF_FABRIC_DEVICE;
fcport->fw_login_state = DSC_LS_PLOGI_PEND;
memcpy(fcport->port_name, e->u.new_sess.port_name,
WWN_SIZE);
} else {
ql_dbg(ql_dbg_disc, vha, 0xffff,
"%s %8phC mem alloc fail.\n",
__func__, e->u.new_sess.port_name);
if (pla)
kmem_cache_free(qla_tgt_plogi_cachep, pla);
return;
}
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
/* search again to make sure one else got ahead */
tfcp = qla2x00_find_fcport_by_wwpn(vha,
e->u.new_sess.port_name, 1);
if (tfcp) {
/* should rarily happen */
ql_dbg(ql_dbg_disc, vha, 0xffff,
"%s %8phC found existing fcport b4 add. DS %d LS %d\n",
__func__, tfcp->port_name, tfcp->disc_state,
tfcp->fw_login_state);
free_fcport = 1;
} else {
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
list_add_tail(&fcport->list, &vha->vp_fcports);
if (pla) {
qlt_plogi_ack_link(vha, pla, fcport,
QLT_PLOGI_LINK_SAME_WWN);
pla->ref_count--;
}
}
}
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
if (fcport) {
if (pla)
qlt_plogi_ack_unref(vha, pla);
else
qla24xx_async_gnl(vha, fcport);
}
if (free_fcport) {
qla2x00_free_fcport(fcport);
if (pla)
kmem_cache_free(qla_tgt_plogi_cachep, pla);
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
}
void
qla2x00_do_work(struct scsi_qla_host *vha)
{
struct qla_work_evt *e, *tmp;
unsigned long flags;
LIST_HEAD(work);
spin_lock_irqsave(&vha->work_lock, flags);
list_splice_init(&vha->work_list, &work);
spin_unlock_irqrestore(&vha->work_lock, flags);
list_for_each_entry_safe(e, tmp, &work, list) {
list_del_init(&e->list);
switch (e->type) {
case QLA_EVT_AEN:
fc_host_post_event(vha->host, fc_get_event_number(),
e->u.aen.code, e->u.aen.data);
break;
case QLA_EVT_IDC_ACK:
qla81xx_idc_ack(vha, e->u.idc_ack.mb);
break;
case QLA_EVT_ASYNC_LOGIN:
qla2x00_async_login(vha, e->u.logio.fcport,
e->u.logio.data);
break;
case QLA_EVT_ASYNC_LOGOUT:
qla2x00_async_logout(vha, e->u.logio.fcport);
break;
case QLA_EVT_ASYNC_LOGOUT_DONE:
qla2x00_async_logout_done(vha, e->u.logio.fcport,
e->u.logio.data);
break;
case QLA_EVT_ASYNC_ADISC:
qla2x00_async_adisc(vha, e->u.logio.fcport,
e->u.logio.data);
break;
case QLA_EVT_ASYNC_ADISC_DONE:
qla2x00_async_adisc_done(vha, e->u.logio.fcport,
e->u.logio.data);
break;
case QLA_EVT_UEVENT:
qla2x00_uevent_emit(vha, e->u.uevent.code);
break;
case QLA_EVT_AENFX:
qlafx00_process_aen(vha, e);
break;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
case QLA_EVT_GIDPN:
qla24xx_async_gidpn(vha, e->u.fcport.fcport);
break;
case QLA_EVT_GPNID:
qla24xx_async_gpnid(vha, &e->u.gpnid.id);
break;
case QLA_EVT_GPNID_DONE:
qla24xx_async_gpnid_done(vha, e->u.iosb.sp);
break;
case QLA_EVT_NEW_SESS:
qla24xx_create_new_sess(vha, e);
break;
case QLA_EVT_GPDB:
qla24xx_async_gpdb(vha, e->u.fcport.fcport,
e->u.fcport.opt);
break;
case QLA_EVT_PRLI:
qla24xx_async_prli(vha, e->u.fcport.fcport);
break;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
case QLA_EVT_GPSC:
qla24xx_async_gpsc(vha, e->u.fcport.fcport);
break;
case QLA_EVT_UPD_FCPORT:
qla2x00_update_fcport(vha, e->u.fcport.fcport);
break;
case QLA_EVT_GNL:
qla24xx_async_gnl(vha, e->u.fcport.fcport);
break;
case QLA_EVT_NACK:
qla24xx_do_nack_work(vha, e);
break;
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
/* For each work completed decrement vha ref count */
QLA_VHA_MARK_NOT_BUSY(vha);
}
}
/* Relogins all the fcports of a vport
* Context: dpc thread
*/
void qla2x00_relogin(struct scsi_qla_host *vha)
{
fc_port_t *fcport;
int status;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
struct event_arg ea;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
/*
* If the port is not ONLINE then try to login
* to it if we haven't run out of retries.
*/
if (atomic_read(&fcport->state) != FCS_ONLINE &&
fcport->login_retry && !(fcport->flags & FCF_ASYNC_SENT)) {
fcport->login_retry--;
if (fcport->flags & FCF_FABRIC_DEVICE) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x2108,
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
"%s %8phC DS %d LS %d\n", __func__,
fcport->port_name, fcport->disc_state,
fcport->fw_login_state);
memset(&ea, 0, sizeof(ea));
ea.event = FCME_RELOGIN;
ea.fcport = fcport;
qla2x00_fcport_event_handler(vha, &ea);
} else {
status = qla2x00_local_device_login(vha,
fcport);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
if (status == QLA_SUCCESS) {
fcport->old_loop_id = fcport->loop_id;
ql_dbg(ql_dbg_disc, vha, 0x2003,
"Port login OK: logged in ID 0x%x.\n",
fcport->loop_id);
qla2x00_update_fcport(vha, fcport);
} else if (status == 1) {
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
/* retry the login again */
ql_dbg(ql_dbg_disc, vha, 0x2007,
"Retrying %d login again loop_id 0x%x.\n",
fcport->login_retry,
fcport->loop_id);
} else {
fcport->login_retry = 0;
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
if (fcport->login_retry == 0 &&
status != QLA_SUCCESS)
qla2x00_clear_loop_id(fcport);
}
}
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
break;
}
}
/* Schedule work on any of the dpc-workqueues */
void
qla83xx_schedule_work(scsi_qla_host_t *base_vha, int work_code)
{
struct qla_hw_data *ha = base_vha->hw;
switch (work_code) {
case MBA_IDC_AEN: /* 0x8200 */
if (ha->dpc_lp_wq)
queue_work(ha->dpc_lp_wq, &ha->idc_aen);
break;
case QLA83XX_NIC_CORE_RESET: /* 0x1 */
if (!ha->flags.nic_core_reset_hdlr_active) {
if (ha->dpc_hp_wq)
queue_work(ha->dpc_hp_wq, &ha->nic_core_reset);
} else
ql_dbg(ql_dbg_p3p, base_vha, 0xb05e,
"NIC Core reset is already active. Skip "
"scheduling it again.\n");
break;
case QLA83XX_IDC_STATE_HANDLER: /* 0x2 */
if (ha->dpc_hp_wq)
queue_work(ha->dpc_hp_wq, &ha->idc_state_handler);
break;
case QLA83XX_NIC_CORE_UNRECOVERABLE: /* 0x3 */
if (ha->dpc_hp_wq)
queue_work(ha->dpc_hp_wq, &ha->nic_core_unrecoverable);
break;
default:
ql_log(ql_log_warn, base_vha, 0xb05f,
"Unknown work-code=0x%x.\n", work_code);
}
return;
}
/* Work: Perform NIC Core Unrecoverable state handling */
void
qla83xx_nic_core_unrecoverable_work(struct work_struct *work)
{
struct qla_hw_data *ha =
container_of(work, struct qla_hw_data, nic_core_unrecoverable);
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
uint32_t dev_state = 0;
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state);
qla83xx_reset_ownership(base_vha);
if (ha->flags.nic_core_reset_owner) {
ha->flags.nic_core_reset_owner = 0;
qla83xx_wr_reg(base_vha, QLA83XX_IDC_DEV_STATE,
QLA8XXX_DEV_FAILED);
ql_log(ql_log_info, base_vha, 0xb060, "HW State: FAILED.\n");
qla83xx_schedule_work(base_vha, QLA83XX_IDC_STATE_HANDLER);
}
qla83xx_idc_unlock(base_vha, 0);
}
/* Work: Execute IDC state handler */
void
qla83xx_idc_state_handler_work(struct work_struct *work)
{
struct qla_hw_data *ha =
container_of(work, struct qla_hw_data, idc_state_handler);
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
uint32_t dev_state = 0;
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state);
if (dev_state == QLA8XXX_DEV_FAILED ||
dev_state == QLA8XXX_DEV_NEED_QUIESCENT)
qla83xx_idc_state_handler(base_vha);
qla83xx_idc_unlock(base_vha, 0);
}
static int
qla83xx_check_nic_core_fw_alive(scsi_qla_host_t *base_vha)
{
int rval = QLA_SUCCESS;
unsigned long heart_beat_wait = jiffies + (1 * HZ);
uint32_t heart_beat_counter1, heart_beat_counter2;
do {
if (time_after(jiffies, heart_beat_wait)) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb07c,
"Nic Core f/w is not alive.\n");
rval = QLA_FUNCTION_FAILED;
break;
}
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_FW_HEARTBEAT,
&heart_beat_counter1);
qla83xx_idc_unlock(base_vha, 0);
msleep(100);
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_FW_HEARTBEAT,
&heart_beat_counter2);
qla83xx_idc_unlock(base_vha, 0);
} while (heart_beat_counter1 == heart_beat_counter2);
return rval;
}
/* Work: Perform NIC Core Reset handling */
void
qla83xx_nic_core_reset_work(struct work_struct *work)
{
struct qla_hw_data *ha =
container_of(work, struct qla_hw_data, nic_core_reset);
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
uint32_t dev_state = 0;
if (IS_QLA2031(ha)) {
if (qla2xxx_mctp_dump(base_vha) != QLA_SUCCESS)
ql_log(ql_log_warn, base_vha, 0xb081,
"Failed to dump mctp\n");
return;
}
if (!ha->flags.nic_core_reset_hdlr_active) {
if (qla83xx_check_nic_core_fw_alive(base_vha) == QLA_SUCCESS) {
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE,
&dev_state);
qla83xx_idc_unlock(base_vha, 0);
if (dev_state != QLA8XXX_DEV_NEED_RESET) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb07a,
"Nic Core f/w is alive.\n");
return;
}
}
ha->flags.nic_core_reset_hdlr_active = 1;
if (qla83xx_nic_core_reset(base_vha)) {
/* NIC Core reset failed. */
ql_dbg(ql_dbg_p3p, base_vha, 0xb061,
"NIC Core reset failed.\n");
}
ha->flags.nic_core_reset_hdlr_active = 0;
}
}
/* Work: Handle 8200 IDC aens */
void
qla83xx_service_idc_aen(struct work_struct *work)
{
struct qla_hw_data *ha =
container_of(work, struct qla_hw_data, idc_aen);
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
uint32_t dev_state, idc_control;
qla83xx_idc_lock(base_vha, 0);
qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state);
qla83xx_rd_reg(base_vha, QLA83XX_IDC_CONTROL, &idc_control);
qla83xx_idc_unlock(base_vha, 0);
if (dev_state == QLA8XXX_DEV_NEED_RESET) {
if (idc_control & QLA83XX_IDC_GRACEFUL_RESET) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb062,
"Application requested NIC Core Reset.\n");
qla83xx_schedule_work(base_vha, QLA83XX_NIC_CORE_RESET);
} else if (qla83xx_check_nic_core_fw_alive(base_vha) ==
QLA_SUCCESS) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb07b,
"Other protocol driver requested NIC Core Reset.\n");
qla83xx_schedule_work(base_vha, QLA83XX_NIC_CORE_RESET);
}
} else if (dev_state == QLA8XXX_DEV_FAILED ||
dev_state == QLA8XXX_DEV_NEED_QUIESCENT) {
qla83xx_schedule_work(base_vha, QLA83XX_IDC_STATE_HANDLER);
}
}
static void
qla83xx_wait_logic(void)
{
int i;
/* Yield CPU */
if (!in_interrupt()) {
/*
* Wait about 200ms before retrying again.
* This controls the number of retries for single
* lock operation.
*/
msleep(100);
schedule();
} else {
for (i = 0; i < 20; i++)
cpu_relax(); /* This a nop instr on i386 */
}
}
static int
qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha)
{
int rval;
uint32_t data;
uint32_t idc_lck_rcvry_stage_mask = 0x3;
uint32_t idc_lck_rcvry_owner_mask = 0x3c;
struct qla_hw_data *ha = base_vha->hw;
ql_dbg(ql_dbg_p3p, base_vha, 0xb086,
"Trying force recovery of the IDC lock.\n");
rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, &data);
if (rval)
return rval;
if ((data & idc_lck_rcvry_stage_mask) > 0) {
return QLA_SUCCESS;
} else {
data = (IDC_LOCK_RECOVERY_STAGE1) | (ha->portnum << 2);
rval = qla83xx_wr_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY,
data);
if (rval)
return rval;
msleep(200);
rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY,
&data);
if (rval)
return rval;
if (((data & idc_lck_rcvry_owner_mask) >> 2) == ha->portnum) {
data &= (IDC_LOCK_RECOVERY_STAGE2 |
~(idc_lck_rcvry_stage_mask));
rval = qla83xx_wr_reg(base_vha,
QLA83XX_IDC_LOCK_RECOVERY, data);
if (rval)
return rval;
/* Forcefully perform IDC UnLock */
rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_UNLOCK,
&data);
if (rval)
return rval;
/* Clear lock-id by setting 0xff */
rval = qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID,
0xff);
if (rval)
return rval;
/* Clear lock-recovery by setting 0x0 */
rval = qla83xx_wr_reg(base_vha,
QLA83XX_IDC_LOCK_RECOVERY, 0x0);
if (rval)
return rval;
} else
return QLA_SUCCESS;
}
return rval;
}
static int
qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha)
{
int rval = QLA_SUCCESS;
uint32_t o_drv_lockid, n_drv_lockid;
unsigned long lock_recovery_timeout;
lock_recovery_timeout = jiffies + QLA83XX_MAX_LOCK_RECOVERY_WAIT;
retry_lockid:
rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &o_drv_lockid);
if (rval)
goto exit;
/* MAX wait time before forcing IDC Lock recovery = 2 secs */
if (time_after_eq(jiffies, lock_recovery_timeout)) {
if (qla83xx_force_lock_recovery(base_vha) == QLA_SUCCESS)
return QLA_SUCCESS;
else
return QLA_FUNCTION_FAILED;
}
rval = qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &n_drv_lockid);
if (rval)
goto exit;
if (o_drv_lockid == n_drv_lockid) {
qla83xx_wait_logic();
goto retry_lockid;
} else
return QLA_SUCCESS;
exit:
return rval;
}
void
qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
{
uint16_t options = (requester_id << 15) | BIT_6;
uint32_t data;
uint32_t lock_owner;
struct qla_hw_data *ha = base_vha->hw;
/* IDC-lock implementation using driver-lock/lock-id remote registers */
retry_lock:
if (qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCK, &data)
== QLA_SUCCESS) {
if (data) {
/* Setting lock-id to our function-number */
qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID,
ha->portnum);
} else {
qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID,
&lock_owner);
ql_dbg(ql_dbg_p3p, base_vha, 0xb063,
"Failed to acquire IDC lock, acquired by %d, "
"retrying...\n", lock_owner);
/* Retry/Perform IDC-Lock recovery */
if (qla83xx_idc_lock_recovery(base_vha)
== QLA_SUCCESS) {
qla83xx_wait_logic();
goto retry_lock;
} else
ql_log(ql_log_warn, base_vha, 0xb075,
"IDC Lock recovery FAILED.\n");
}
}
return;
/* XXX: IDC-lock implementation using access-control mbx */
retry_lock2:
if (qla83xx_access_control(base_vha, options, 0, 0, NULL)) {
ql_dbg(ql_dbg_p3p, base_vha, 0xb072,
"Failed to acquire IDC lock. retrying...\n");
/* Retry/Perform IDC-Lock recovery */
if (qla83xx_idc_lock_recovery(base_vha) == QLA_SUCCESS) {
qla83xx_wait_logic();
goto retry_lock2;
} else
ql_log(ql_log_warn, base_vha, 0xb076,
"IDC Lock recovery FAILED.\n");
}
return;
}
void
qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
{
#if 0
uint16_t options = (requester_id << 15) | BIT_7;
#endif
uint16_t retry;
uint32_t data;
struct qla_hw_data *ha = base_vha->hw;
/* IDC-unlock implementation using driver-unlock/lock-id
* remote registers
*/
retry = 0;
retry_unlock:
if (qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, &data)
== QLA_SUCCESS) {
if (data == ha->portnum) {
qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_UNLOCK, &data);
/* Clearing lock-id by setting 0xff */
qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID, 0xff);
} else if (retry < 10) {
/* SV: XXX: IDC unlock retrying needed here? */
/* Retry for IDC-unlock */
qla83xx_wait_logic();
retry++;
ql_dbg(ql_dbg_p3p, base_vha, 0xb064,
"Failed to release IDC lock, retrying=%d\n", retry);
goto retry_unlock;
}
} else if (retry < 10) {
/* Retry for IDC-unlock */
qla83xx_wait_logic();
retry++;
ql_dbg(ql_dbg_p3p, base_vha, 0xb065,
"Failed to read drv-lockid, retrying=%d\n", retry);
goto retry_unlock;
}
return;
#if 0
/* XXX: IDC-unlock implementation using access-control mbx */
retry = 0;
retry_unlock2:
if (qla83xx_access_control(base_vha, options, 0, 0, NULL)) {
if (retry < 10) {
/* Retry for IDC-unlock */
qla83xx_wait_logic();
retry++;
ql_dbg(ql_dbg_p3p, base_vha, 0xb066,
"Failed to release IDC lock, retrying=%d\n", retry);
goto retry_unlock2;
}
}
return;
#endif
}
int
__qla83xx_set_drv_presence(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
uint32_t drv_presence;
rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
if (rval == QLA_SUCCESS) {
drv_presence |= (1 << ha->portnum);
rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE,
drv_presence);
}
return rval;
}
int
qla83xx_set_drv_presence(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
qla83xx_idc_lock(vha, 0);
rval = __qla83xx_set_drv_presence(vha);
qla83xx_idc_unlock(vha, 0);
return rval;
}
int
__qla83xx_clear_drv_presence(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
uint32_t drv_presence;
rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
if (rval == QLA_SUCCESS) {
drv_presence &= ~(1 << ha->portnum);
rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE,
drv_presence);
}
return rval;
}
int
qla83xx_clear_drv_presence(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
qla83xx_idc_lock(vha, 0);
rval = __qla83xx_clear_drv_presence(vha);
qla83xx_idc_unlock(vha, 0);
return rval;
}
static void
qla83xx_need_reset_handler(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
uint32_t drv_ack, drv_presence;
unsigned long ack_timeout;
/* Wait for IDC ACK from all functions (DRV-ACK == DRV-PRESENCE) */
ack_timeout = jiffies + (ha->fcoe_reset_timeout * HZ);
while (1) {
qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
if ((drv_ack & drv_presence) == drv_presence)
break;
if (time_after_eq(jiffies, ack_timeout)) {
ql_log(ql_log_warn, vha, 0xb067,
"RESET ACK TIMEOUT! drv_presence=0x%x "
"drv_ack=0x%x\n", drv_presence, drv_ack);
/*
* The function(s) which did not ack in time are forced
* to withdraw any further participation in the IDC
* reset.
*/
if (drv_ack != drv_presence)
qla83xx_wr_reg(vha, QLA83XX_IDC_DRV_PRESENCE,
drv_ack);
break;
}
qla83xx_idc_unlock(vha, 0);
msleep(1000);
qla83xx_idc_lock(vha, 0);
}
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_COLD);
ql_log(ql_log_info, vha, 0xb068, "HW State: COLD/RE-INIT.\n");
}
static int
qla83xx_device_bootstrap(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
uint32_t idc_control;
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_INITIALIZING);
ql_log(ql_log_info, vha, 0xb069, "HW State: INITIALIZING.\n");
/* Clearing IDC-Control Graceful-Reset Bit before resetting f/w */
__qla83xx_get_idc_control(vha, &idc_control);
idc_control &= ~QLA83XX_IDC_GRACEFUL_RESET;
__qla83xx_set_idc_control(vha, 0);
qla83xx_idc_unlock(vha, 0);
rval = qla83xx_restart_nic_firmware(vha);
qla83xx_idc_lock(vha, 0);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_fatal, vha, 0xb06a,
"Failed to restart NIC f/w.\n");
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_FAILED);
ql_log(ql_log_info, vha, 0xb06b, "HW State: FAILED.\n");
} else {
ql_dbg(ql_dbg_p3p, vha, 0xb06c,
"Success in restarting nic f/w.\n");
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, QLA8XXX_DEV_READY);
ql_log(ql_log_info, vha, 0xb06d, "HW State: READY.\n");
}
return rval;
}
/* Assumes idc_lock always held on entry */
int
qla83xx_idc_state_handler(scsi_qla_host_t *base_vha)
{
struct qla_hw_data *ha = base_vha->hw;
int rval = QLA_SUCCESS;
unsigned long dev_init_timeout;
uint32_t dev_state;
/* Wait for MAX-INIT-TIMEOUT for the device to go ready */
dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout * HZ);
while (1) {
if (time_after_eq(jiffies, dev_init_timeout)) {
ql_log(ql_log_warn, base_vha, 0xb06e,
"Initialization TIMEOUT!\n");
/* Init timeout. Disable further NIC Core
* communication.
*/
qla83xx_wr_reg(base_vha, QLA83XX_IDC_DEV_STATE,
QLA8XXX_DEV_FAILED);
ql_log(ql_log_info, base_vha, 0xb06f,
"HW State: FAILED.\n");
}
qla83xx_rd_reg(base_vha, QLA83XX_IDC_DEV_STATE, &dev_state);
switch (dev_state) {
case QLA8XXX_DEV_READY:
if (ha->flags.nic_core_reset_owner)
qla83xx_idc_audit(base_vha,
IDC_AUDIT_COMPLETION);
ha->flags.nic_core_reset_owner = 0;
ql_dbg(ql_dbg_p3p, base_vha, 0xb070,
"Reset_owner reset by 0x%x.\n",
ha->portnum);
goto exit;
case QLA8XXX_DEV_COLD:
if (ha->flags.nic_core_reset_owner)
rval = qla83xx_device_bootstrap(base_vha);
else {
/* Wait for AEN to change device-state */
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
}
break;
case QLA8XXX_DEV_INITIALIZING:
/* Wait for AEN to change device-state */
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
break;
case QLA8XXX_DEV_NEED_RESET:
if (!ql2xdontresethba && ha->flags.nic_core_reset_owner)
qla83xx_need_reset_handler(base_vha);
else {
/* Wait for AEN to change device-state */
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
}
/* reset timeout value after need reset handler */
dev_init_timeout = jiffies +
(ha->fcoe_dev_init_timeout * HZ);
break;
case QLA8XXX_DEV_NEED_QUIESCENT:
/* XXX: DEBUG for now */
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
break;
case QLA8XXX_DEV_QUIESCENT:
/* XXX: DEBUG for now */
if (ha->flags.quiesce_owner)
goto exit;
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
dev_init_timeout = jiffies +
(ha->fcoe_dev_init_timeout * HZ);
break;
case QLA8XXX_DEV_FAILED:
if (ha->flags.nic_core_reset_owner)
qla83xx_idc_audit(base_vha,
IDC_AUDIT_COMPLETION);
ha->flags.nic_core_reset_owner = 0;
__qla83xx_clear_drv_presence(base_vha);
qla83xx_idc_unlock(base_vha, 0);
qla8xxx_dev_failed_handler(base_vha);
rval = QLA_FUNCTION_FAILED;
qla83xx_idc_lock(base_vha, 0);
goto exit;
case QLA8XXX_BAD_VALUE:
qla83xx_idc_unlock(base_vha, 0);
msleep(1000);
qla83xx_idc_lock(base_vha, 0);
break;
default:
ql_log(ql_log_warn, base_vha, 0xb071,
"Unknown Device State: %x.\n", dev_state);
qla83xx_idc_unlock(base_vha, 0);
qla8xxx_dev_failed_handler(base_vha);
rval = QLA_FUNCTION_FAILED;
qla83xx_idc_lock(base_vha, 0);
goto exit;
}
}
exit:
return rval;
}
void
qla2x00_disable_board_on_pci_error(struct work_struct *work)
{
struct qla_hw_data *ha = container_of(work, struct qla_hw_data,
board_disable);
struct pci_dev *pdev = ha->pdev;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
/*
* if UNLOAD flag is already set, then continue unload,
* where it was set first.
*/
if (test_bit(UNLOADING, &base_vha->dpc_flags))
return;
ql_log(ql_log_warn, base_vha, 0x015b,
"Disabling adapter.\n");
if (!atomic_read(&pdev->enable_cnt)) {
ql_log(ql_log_info, base_vha, 0xfffc,
"PCI device disabled, no action req for PCI error=%lx\n",
base_vha->pci_flags);
return;
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
qla2x00_wait_for_sess_deletion(base_vha);
set_bit(UNLOADING, &base_vha->dpc_flags);
qla2x00_delete_all_vps(ha, base_vha);
qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
qla2x00_dfs_remove(base_vha);
qla84xx_put_chip(base_vha);
if (base_vha->timer_active)
qla2x00_stop_timer(base_vha);
base_vha->flags.online = 0;
qla2x00_destroy_deferred_work(ha);
/*
* Do not try to stop beacon blink as it will issue a mailbox
* command.
*/
qla2x00_free_sysfs_attr(base_vha, false);
fc_remove_host(base_vha->host);
scsi_remove_host(base_vha->host);
base_vha->flags.init_done = 0;
qla25xx_delete_queues(base_vha);
qla2x00_free_fcports(base_vha);
qla2x00_free_irqs(base_vha);
qla2x00_mem_free(ha);
qla82xx_md_free(base_vha);
qla2x00_free_queues(ha);
qla2x00_unmap_iobases(ha);
pci_release_selected_regions(ha->pdev, ha->bars);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
/*
* Let qla2x00_remove_one cleanup qla_hw_data on device removal.
*/
}
/**************************************************************************
* qla2x00_do_dpc
* This kernel thread is a task that is schedule by the interrupt handler
* to perform the background processing for interrupts.
*
* Notes:
* This task always run in the context of a kernel thread. It
* is kick-off by the driver's detect code and starts up
* up one per adapter. It immediately goes to sleep and waits for
* some fibre event. When either the interrupt handler or
* the timer routine detects a event it will one of the task
* bits then wake us up.
**************************************************************************/
static int
qla2x00_do_dpc(void *data)
{
scsi_qla_host_t *base_vha;
struct qla_hw_data *ha;
uint32_t online;
struct qla_qpair *qpair;
ha = (struct qla_hw_data *)data;
base_vha = pci_get_drvdata(ha->pdev);
set_user_nice(current, MIN_NICE);
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4000,
"DPC handler sleeping.\n");
schedule();
if (!base_vha->flags.init_done || ha->flags.mbox_busy)
goto end_loop;
if (ha->flags.eeh_busy) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4003,
"eeh_busy=%d.\n", ha->flags.eeh_busy);
goto end_loop;
}
ha->dpc_active = 1;
ql_dbg(ql_dbg_dpc + ql_dbg_verbose, base_vha, 0x4001,
"DPC handler waking up, dpc_flags=0x%lx.\n",
base_vha->dpc_flags);
if (test_bit(UNLOADING, &base_vha->dpc_flags))
break;
qla2x00_do_work(base_vha);
if (IS_P3P_TYPE(ha)) {
if (IS_QLA8044(ha)) {
if (test_and_clear_bit(ISP_UNRECOVERABLE,
&base_vha->dpc_flags)) {
qla8044_idc_lock(ha);
qla8044_wr_direct(base_vha,
QLA8044_CRB_DEV_STATE_INDEX,
QLA8XXX_DEV_FAILED);
qla8044_idc_unlock(ha);
ql_log(ql_log_info, base_vha, 0x4004,
"HW State: FAILED.\n");
qla8044_device_state_handler(base_vha);
continue;
}
} else {
if (test_and_clear_bit(ISP_UNRECOVERABLE,
&base_vha->dpc_flags)) {
qla82xx_idc_lock(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA8XXX_DEV_FAILED);
qla82xx_idc_unlock(ha);
ql_log(ql_log_info, base_vha, 0x0151,
"HW State: FAILED.\n");
qla82xx_device_state_handler(base_vha);
continue;
}
}
if (test_and_clear_bit(FCOE_CTX_RESET_NEEDED,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4005,
"FCoE context reset scheduled.\n");
if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags))) {
if (qla82xx_fcoe_ctx_reset(base_vha)) {
/* FCoE-ctx reset failed.
* Escalate to chip-reset
*/
set_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags);
}
clear_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags);
}
ql_dbg(ql_dbg_dpc, base_vha, 0x4006,
"FCoE context reset end.\n");
}
} else if (IS_QLAFX00(ha)) {
if (test_and_clear_bit(ISP_UNRECOVERABLE,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4020,
"Firmware Reset Recovery\n");
if (qlafx00_reset_initialize(base_vha)) {
/* Failed. Abort isp later. */
if (!test_bit(UNLOADING,
&base_vha->dpc_flags)) {
set_bit(ISP_UNRECOVERABLE,
&base_vha->dpc_flags);
ql_dbg(ql_dbg_dpc, base_vha,
0x4021,
"Reset Recovery Failed\n");
}
}
}
if (test_and_clear_bit(FX00_TARGET_SCAN,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4022,
"ISPFx00 Target Scan scheduled\n");
if (qlafx00_rescan_isp(base_vha)) {
if (!test_bit(UNLOADING,
&base_vha->dpc_flags))
set_bit(ISP_UNRECOVERABLE,
&base_vha->dpc_flags);
ql_dbg(ql_dbg_dpc, base_vha, 0x401e,
"ISPFx00 Target Scan Failed\n");
}
ql_dbg(ql_dbg_dpc, base_vha, 0x401f,
"ISPFx00 Target Scan End\n");
}
if (test_and_clear_bit(FX00_HOST_INFO_RESEND,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4023,
"ISPFx00 Host Info resend scheduled\n");
qlafx00_fx_disc(base_vha,
&base_vha->hw->mr.fcport,
FXDISC_REG_HOST_INFO);
}
}
if (test_and_clear_bit(DETECT_SFP_CHANGE,
&base_vha->dpc_flags) &&
!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) {
qla24xx_detect_sfp(base_vha);
if (ha->flags.detected_lr_sfp !=
ha->flags.using_lr_setting)
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
}
if (test_and_clear_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
"ISP abort scheduled.\n");
if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags))) {
if (ha->isp_ops->abort_isp(base_vha)) {
/* failed. retry later */
set_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags);
}
clear_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags);
}
ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
"ISP abort end.\n");
}
[SCSI] qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically. When the qla2xxx driver loses access to multiple, remote ports, there is a race condition which can occur which will keep the request stuck on a scsi request queue indefinitely. This bad state occurred do to a race condition with how the FCPORT_UPDATE_NEEDED bit is set in qla2x00_schedule_rport_del(), and how it is cleared in qla2x00_do_dpc(). The problem port has its drport pointer set, but it has never been processed by the driver to inform the fc transport that the port has been lost. qla2x00_schedule_rport_del() sets drport, and then sets the FCPORT_UPDATE_NEEDED bit. In qla2x00_do_dpc(), the port lists are walked and any drport pointer is handled and the fc transport informed of the port loss, then the FCPORT_UPDATE_NEEDED bit is cleared. This leaves a race where the dpc thread is processing one port removal, another port removal is marked with a call to qla2x00_schedule_rport_del(), and the dpc thread clears the bit for both removals, even though only the first removal was actually handled. Until another event occurs to set FCPORT_UPDATE_NEEDED, the later port removal is never finished and qla2xxx stays in a bad state which causes requests to become stuck on request queues. This patch updates the driver to test and clear FCPORT_UPDATE_NEEDED atomically. This ensures the port state changes are processed and not lost. Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-21 07:39:54 +00:00
if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
&base_vha->dpc_flags)) {
qla2x00_update_fcports(base_vha);
}
if (IS_QLAFX00(ha))
goto loop_resync_check;
if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4009,
"Quiescence mode scheduled.\n");
if (IS_P3P_TYPE(ha)) {
if (IS_QLA82XX(ha))
qla82xx_device_state_handler(base_vha);
if (IS_QLA8044(ha))
qla8044_device_state_handler(base_vha);
clear_bit(ISP_QUIESCE_NEEDED,
&base_vha->dpc_flags);
if (!ha->flags.quiesce_owner) {
qla2x00_perform_loop_resync(base_vha);
if (IS_QLA82XX(ha)) {
qla82xx_idc_lock(ha);
qla82xx_clear_qsnt_ready(
base_vha);
qla82xx_idc_unlock(ha);
} else if (IS_QLA8044(ha)) {
qla8044_idc_lock(ha);
qla8044_clear_qsnt_ready(
base_vha);
qla8044_idc_unlock(ha);
}
}
} else {
clear_bit(ISP_QUIESCE_NEEDED,
&base_vha->dpc_flags);
qla2x00_quiesce_io(base_vha);
}
ql_dbg(ql_dbg_dpc, base_vha, 0x400a,
"Quiescence mode end.\n");
}
if (test_and_clear_bit(RESET_MARKER_NEEDED,
&base_vha->dpc_flags) &&
(!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
ql_dbg(ql_dbg_dpc, base_vha, 0x400b,
"Reset marker scheduled.\n");
qla2x00_rst_aen(base_vha);
clear_bit(RESET_ACTIVE, &base_vha->dpc_flags);
ql_dbg(ql_dbg_dpc, base_vha, 0x400c,
"Reset marker end.\n");
}
/* Retry each device up to login retry count */
if ((test_and_clear_bit(RELOGIN_NEEDED,
&base_vha->dpc_flags)) &&
!test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags) &&
atomic_read(&base_vha->loop_state) != LOOP_DOWN) {
ql_dbg(ql_dbg_dpc, base_vha, 0x400d,
"Relogin scheduled.\n");
qla2x00_relogin(base_vha);
ql_dbg(ql_dbg_dpc, base_vha, 0x400e,
"Relogin end.\n");
}
loop_resync_check:
if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
&base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x400f,
"Loop resync scheduled.\n");
if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
&base_vha->dpc_flags))) {
qla2x00_loop_resync(base_vha);
clear_bit(LOOP_RESYNC_ACTIVE,
&base_vha->dpc_flags);
}
ql_dbg(ql_dbg_dpc, base_vha, 0x4010,
"Loop resync end.\n");
}
if (IS_QLAFX00(ha))
goto intr_on_check;
if (test_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags) &&
atomic_read(&base_vha->loop_state) == LOOP_READY) {
clear_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags);
qla2xxx_flash_npiv_conf(base_vha);
}
intr_on_check:
if (!ha->interrupts_on)
ha->isp_ops->enable_intrs(ha);
if (test_and_clear_bit(BEACON_BLINK_NEEDED,
&base_vha->dpc_flags)) {
if (ha->beacon_blink_led == 1)
ha->isp_ops->beacon_blink(base_vha);
}
/* qpair online check */
if (test_and_clear_bit(QPAIR_ONLINE_CHECK_NEEDED,
&base_vha->dpc_flags)) {
if (ha->flags.eeh_busy ||
ha->flags.pci_channel_io_perm_failure)
online = 0;
else
online = 1;
mutex_lock(&ha->mq_lock);
list_for_each_entry(qpair, &base_vha->qp_list,
qp_list_elem)
qpair->online = online;
mutex_unlock(&ha->mq_lock);
}
if (test_and_clear_bit(SET_ZIO_THRESHOLD_NEEDED, &base_vha->dpc_flags)) {
ql_log(ql_log_info, base_vha, 0xffffff,
"nvme: SET ZIO Activity exchange threshold to %d.\n",
ha->nvme_last_rptd_aen);
if (qla27xx_set_zio_threshold(base_vha, ha->nvme_last_rptd_aen)) {
ql_log(ql_log_info, base_vha, 0xffffff,
"nvme: Unable to SET ZIO Activity exchange threshold to %d.\n",
ha->nvme_last_rptd_aen);
}
}
if (!IS_QLAFX00(ha))
qla2x00_do_dpc_all_vps(base_vha);
ha->dpc_active = 0;
end_loop:
set_current_state(TASK_INTERRUPTIBLE);
} /* End of while(1) */
__set_current_state(TASK_RUNNING);
ql_dbg(ql_dbg_dpc, base_vha, 0x4011,
"DPC handler exiting.\n");
/*
* Make sure that nobody tries to wake us up again.
*/
ha->dpc_active = 0;
/* Cleanup any residual CTX SRBs. */
qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
return 0;
}
void
qla2xxx_wake_dpc(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
struct task_struct *t = ha->dpc_thread;
if (!test_bit(UNLOADING, &vha->dpc_flags) && t)
wake_up_process(t);
}
/*
* qla2x00_rst_aen
* Processes asynchronous reset.
*
* Input:
* ha = adapter block pointer.
*/
static void
qla2x00_rst_aen(scsi_qla_host_t *vha)
{
if (vha->flags.online && !vha->flags.reset_active &&
!atomic_read(&vha->loop_down_timer) &&
!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))) {
do {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
/*
* Issue marker command only when we are going to start
* the I/O.
*/
vha->marker_needed = 1;
} while (!atomic_read(&vha->loop_down_timer) &&
(test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags)));
}
}
/**************************************************************************
* qla2x00_timer
*
* Description:
* One second timer
*
* Context: Interrupt
***************************************************************************/
void
qla2x00_timer(scsi_qla_host_t *vha)
{
unsigned long cpu_flags = 0;
int start_dpc = 0;
int index;
srb_t *sp;
uint16_t w;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
if (ha->flags.eeh_busy) {
ql_dbg(ql_dbg_timer, vha, 0x6000,
"EEH = %d, restarting timer.\n",
ha->flags.eeh_busy);
qla2x00_restart_timer(vha, WATCH_INTERVAL);
return;
}
/*
* Hardware read to raise pending EEH errors during mailbox waits. If
* the read returns -1 then disable the board.
*/
if (!pci_channel_offline(ha->pdev)) {
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
qla2x00_check_reg16_for_disconnect(vha, w);
}
/* Make sure qla82xx_watchdog is run only for physical port */
if (!vha->vp_idx && IS_P3P_TYPE(ha)) {
if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
start_dpc++;
if (IS_QLA82XX(ha))
qla82xx_watchdog(vha);
else if (IS_QLA8044(ha))
qla8044_watchdog(vha);
}
if (!vha->vp_idx && IS_QLAFX00(ha))
qlafx00_timer_routine(vha);
/* Loop down handler. */
if (atomic_read(&vha->loop_down_timer) > 0 &&
!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) &&
!(test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags))
&& vha->flags.online) {
if (atomic_read(&vha->loop_down_timer) ==
vha->loop_down_abort_time) {
ql_log(ql_log_info, vha, 0x6008,
"Loop down - aborting the queues before time expires.\n");
if (!IS_QLA2100(ha) && vha->link_down_timeout)
atomic_set(&vha->loop_state, LOOP_DEAD);
/*
* Schedule an ISP abort to return any FCP2-device
* commands.
*/
/* NPIV - scan physical port only */
if (!vha->vp_idx) {
spin_lock_irqsave(&ha->hardware_lock,
cpu_flags);
req = ha->req_q_map[0];
for (index = 1;
index < req->num_outstanding_cmds;
index++) {
fc_port_t *sfcp;
sp = req->outstanding_cmds[index];
if (!sp)
continue;
if (sp->cmd_type != TYPE_SRB)
continue;
if (sp->type != SRB_SCSI_CMD)
continue;
sfcp = sp->fcport;
if (!(sfcp->flags & FCF_FCP2_DEVICE))
continue;
if (IS_QLA82XX(ha))
set_bit(FCOE_CTX_RESET_NEEDED,
&vha->dpc_flags);
else
set_bit(ISP_ABORT_NEEDED,
&vha->dpc_flags);
break;
}
spin_unlock_irqrestore(&ha->hardware_lock,
cpu_flags);
}
start_dpc++;
}
/* if the loop has been down for 4 minutes, reinit adapter */
if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
if (!(vha->device_flags & DFLG_NO_CABLE)) {
ql_log(ql_log_warn, vha, 0x6009,
"Loop down - aborting ISP.\n");
if (IS_QLA82XX(ha))
set_bit(FCOE_CTX_RESET_NEEDED,
&vha->dpc_flags);
else
set_bit(ISP_ABORT_NEEDED,
&vha->dpc_flags);
}
}
ql_dbg(ql_dbg_timer, vha, 0x600a,
"Loop down - seconds remaining %d.\n",
atomic_read(&vha->loop_down_timer));
}
/* Check if beacon LED needs to be blinked for physical host only */
if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
/* There is no beacon_blink function for ISP82xx */
if (!IS_P3P_TYPE(ha)) {
set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
start_dpc++;
}
}
/* Process any deferred work. */
if (!list_empty(&vha->work_list))
start_dpc++;
/*
* FC-NVME
* see if the active AEN count has changed from what was last reported.
*/
if (!vha->vp_idx &&
atomic_read(&ha->nvme_active_aen_cnt) != ha->nvme_last_rptd_aen &&
ha->zio_mode == QLA_ZIO_MODE_6) {
ql_log(ql_log_info, vha, 0x3002,
"nvme: Sched: Set ZIO exchange threshold to %d.\n",
ha->nvme_last_rptd_aen);
ha->nvme_last_rptd_aen = atomic_read(&ha->nvme_active_aen_cnt);
set_bit(SET_ZIO_THRESHOLD_NEEDED, &vha->dpc_flags);
start_dpc++;
}
/* Schedule the DPC routine if needed */
if ((test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) ||
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags) ||
start_dpc ||
test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) ||
test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags) ||
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
ql_dbg(ql_dbg_timer, vha, 0x600b,
"isp_abort_needed=%d loop_resync_needed=%d "
"fcport_update_needed=%d start_dpc=%d "
"reset_marker_needed=%d",
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags),
test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags),
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags),
start_dpc,
test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags));
ql_dbg(ql_dbg_timer, vha, 0x600c,
"beacon_blink_needed=%d isp_unrecoverable=%d "
"fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
"relogin_needed=%d.\n",
test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
qla2xxx_wake_dpc(vha);
}
qla2x00_restart_timer(vha, WATCH_INTERVAL);
}
/* Firmware interface routines. */
#define FW_BLOBS 11
#define FW_ISP21XX 0
#define FW_ISP22XX 1
#define FW_ISP2300 2
#define FW_ISP2322 3
#define FW_ISP24XX 4
#define FW_ISP25XX 5
#define FW_ISP81XX 6
#define FW_ISP82XX 7
#define FW_ISP2031 8
#define FW_ISP8031 9
#define FW_ISP27XX 10
#define FW_FILE_ISP21XX "ql2100_fw.bin"
#define FW_FILE_ISP22XX "ql2200_fw.bin"
#define FW_FILE_ISP2300 "ql2300_fw.bin"
#define FW_FILE_ISP2322 "ql2322_fw.bin"
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
#define FW_FILE_ISP81XX "ql8100_fw.bin"
#define FW_FILE_ISP82XX "ql8200_fw.bin"
#define FW_FILE_ISP2031 "ql2600_fw.bin"
#define FW_FILE_ISP8031 "ql8300_fw.bin"
#define FW_FILE_ISP27XX "ql2700_fw.bin"
static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
{ .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
{ .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
{ .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
{ .name = FW_FILE_ISP24XX, },
{ .name = FW_FILE_ISP25XX, },
{ .name = FW_FILE_ISP81XX, },
{ .name = FW_FILE_ISP82XX, },
{ .name = FW_FILE_ISP2031, },
{ .name = FW_FILE_ISP8031, },
{ .name = FW_FILE_ISP27XX, },
};
struct fw_blob *
qla2x00_request_firmware(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct fw_blob *blob;
if (IS_QLA2100(ha)) {
blob = &qla_fw_blobs[FW_ISP21XX];
} else if (IS_QLA2200(ha)) {
blob = &qla_fw_blobs[FW_ISP22XX];
} else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
blob = &qla_fw_blobs[FW_ISP2300];
} else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
blob = &qla_fw_blobs[FW_ISP2322];
} else if (IS_QLA24XX_TYPE(ha)) {
blob = &qla_fw_blobs[FW_ISP24XX];
} else if (IS_QLA25XX(ha)) {
blob = &qla_fw_blobs[FW_ISP25XX];
} else if (IS_QLA81XX(ha)) {
blob = &qla_fw_blobs[FW_ISP81XX];
} else if (IS_QLA82XX(ha)) {
blob = &qla_fw_blobs[FW_ISP82XX];
} else if (IS_QLA2031(ha)) {
blob = &qla_fw_blobs[FW_ISP2031];
} else if (IS_QLA8031(ha)) {
blob = &qla_fw_blobs[FW_ISP8031];
} else if (IS_QLA27XX(ha)) {
blob = &qla_fw_blobs[FW_ISP27XX];
} else {
return NULL;
}
mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
ql_log(ql_log_warn, vha, 0x0063,
"Failed to load firmware image (%s).\n", blob->name);
blob->fw = NULL;
blob = NULL;
goto out;
}
out:
mutex_unlock(&qla_fw_lock);
return blob;
}
static void
qla2x00_release_firmware(void)
{
int idx;
mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
release_firmware(qla_fw_blobs[idx].fw);
mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
scsi_qla_host_t *vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = vha->hw;
ql_dbg(ql_dbg_aer, vha, 0x9000,
"PCI error detected, state %x.\n", state);
if (!atomic_read(&pdev->enable_cnt)) {
ql_log(ql_log_info, vha, 0xffff,
"PCI device is disabled,state %x\n", state);
return PCI_ERS_RESULT_NEED_RESET;
}
switch (state) {
case pci_channel_io_normal:
ha->flags.eeh_busy = 0;
if (ql2xmqsupport) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
ha->flags.eeh_busy = 1;
/* For ISP82XX complete any pending mailbox cmd */
if (IS_QLA82XX(ha)) {
ha->flags.isp82xx_fw_hung = 1;
ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n");
qla82xx_clear_pending_mbx(vha);
}
qla2x00_free_irqs(vha);
pci_disable_device(pdev);
/* Return back all IOs */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
if (ql2xmqsupport) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
ha->flags.pci_channel_io_perm_failure = 1;
qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
if (ql2xmqsupport) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
}
static pci_ers_result_t
qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
{
int risc_paused = 0;
uint32_t stat;
unsigned long flags;
scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = base_vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
if (IS_QLA82XX(ha))
return PCI_ERS_RESULT_RECOVERED;
spin_lock_irqsave(&ha->hardware_lock, flags);
if (IS_QLA2100(ha) || IS_QLA2200(ha)){
stat = RD_REG_DWORD(&reg->hccr);
if (stat & HCCR_RISC_PAUSE)
risc_paused = 1;
} else if (IS_QLA23XX(ha)) {
stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED)
risc_paused = 1;
} else if (IS_FWI2_CAPABLE(ha)) {
stat = RD_REG_DWORD(&reg24->host_status);
if (stat & HSRX_RISC_PAUSED)
risc_paused = 1;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (risc_paused) {
ql_log(ql_log_info, base_vha, 0x9003,
"RISC paused -- mmio_enabled, Dumping firmware.\n");
ha->isp_ops->fw_dump(base_vha, 0);
return PCI_ERS_RESULT_NEED_RESET;
} else
return PCI_ERS_RESULT_RECOVERED;
}
static uint32_t
qla82xx_error_recovery(scsi_qla_host_t *base_vha)
{
uint32_t rval = QLA_FUNCTION_FAILED;
uint32_t drv_active = 0;
struct qla_hw_data *ha = base_vha->hw;
int fn;
struct pci_dev *other_pdev = NULL;
ql_dbg(ql_dbg_aer, base_vha, 0x9006,
"Entered %s.\n", __func__);
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (base_vha->flags.online) {
/* Abort all outstanding commands,
* so as to be requeued later */
qla2x00_abort_isp_cleanup(base_vha);
}
fn = PCI_FUNC(ha->pdev->devfn);
while (fn > 0) {
fn--;
ql_dbg(ql_dbg_aer, base_vha, 0x9007,
"Finding pci device at function = 0x%x.\n", fn);
other_pdev =
pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
fn));
if (!other_pdev)
continue;
if (atomic_read(&other_pdev->enable_cnt)) {
ql_dbg(ql_dbg_aer, base_vha, 0x9008,
"Found PCI func available and enable at 0x%x.\n",
fn);
pci_dev_put(other_pdev);
break;
}
pci_dev_put(other_pdev);
}
if (!fn) {
/* Reset owner */
ql_dbg(ql_dbg_aer, base_vha, 0x9009,
"This devfn is reset owner = 0x%x.\n",
ha->pdev->devfn);
qla82xx_idc_lock(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA8XXX_DEV_INITIALIZING);
qla82xx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION,
QLA82XX_IDC_VERSION);
drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
ql_dbg(ql_dbg_aer, base_vha, 0x900a,
"drv_active = 0x%x.\n", drv_active);
qla82xx_idc_unlock(ha);
/* Reset if device is not already reset
* drv_active would be 0 if a reset has already been done
*/
if (drv_active)
rval = qla82xx_start_firmware(base_vha);
else
rval = QLA_SUCCESS;
qla82xx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_info, base_vha, 0x900b,
"HW State: FAILED.\n");
qla82xx_clear_drv_active(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA8XXX_DEV_FAILED);
} else {
ql_log(ql_log_info, base_vha, 0x900c,
"HW State: READY.\n");
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA8XXX_DEV_READY);
qla82xx_idc_unlock(ha);
ha->flags.isp82xx_fw_hung = 0;
rval = qla82xx_restart_isp(base_vha);
qla82xx_idc_lock(ha);
/* Clear driver state register */
qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
qla82xx_set_drv_active(base_vha);
}
qla82xx_idc_unlock(ha);
} else {
ql_dbg(ql_dbg_aer, base_vha, 0x900d,
"This devfn is not reset owner = 0x%x.\n",
ha->pdev->devfn);
if ((qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
QLA8XXX_DEV_READY)) {
ha->flags.isp82xx_fw_hung = 0;
rval = qla82xx_restart_isp(base_vha);
qla82xx_idc_lock(ha);
qla82xx_set_drv_active(base_vha);
qla82xx_idc_unlock(ha);
}
}
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
return rval;
}
static pci_ers_result_t
qla2xxx_pci_slot_reset(struct pci_dev *pdev)
{
pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = base_vha->hw;
struct rsp_que *rsp;
int rc, retries = 10;
ql_dbg(ql_dbg_aer, base_vha, 0x9004,
"Slot Reset.\n");
/* Workaround: qla2xxx driver which access hardware earlier
* needs error state to be pci_channel_io_online.
* Otherwise mailbox command timesout.
*/
pdev->error_state = pci_channel_io_normal;
pci_restore_state(pdev);
/* pci_restore_state() clears the saved_state flag of the device
* save restored state which resets saved_state flag
*/
pci_save_state(pdev);
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
rc = pci_enable_device(pdev);
if (rc) {
ql_log(ql_log_warn, base_vha, 0x9005,
"Can't re-enable PCI device after reset.\n");
goto exit_slot_reset;
}
rsp = ha->rsp_q_map[0];
if (qla2x00_request_irqs(ha, rsp))
goto exit_slot_reset;
if (ha->isp_ops->pci_config(base_vha))
goto exit_slot_reset;
if (IS_QLA82XX(ha)) {
if (qla82xx_error_recovery(base_vha) == QLA_SUCCESS) {
ret = PCI_ERS_RESULT_RECOVERED;
goto exit_slot_reset;
} else
goto exit_slot_reset;
}
while (ha->flags.mbox_busy && retries--)
msleep(1000);
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (ha->isp_ops->abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
exit_slot_reset:
ql_dbg(ql_dbg_aer, base_vha, 0x900e,
"slot_reset return %x.\n", ret);
return ret;
}
static void
qla2xxx_pci_resume(struct pci_dev *pdev)
{
scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = base_vha->hw;
int ret;
ql_dbg(ql_dbg_aer, base_vha, 0x900f,
"pci_resume.\n");
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
ql_log(ql_log_fatal, base_vha, 0x9002,
"The device failed to resume I/O from slot/link_reset.\n");
}
pci_cleanup_aer_uncorrect_error_status(pdev);
ha->flags.eeh_busy = 0;
}
static void
qla83xx_disable_laser(scsi_qla_host_t *vha)
{
uint32_t reg, data, fn;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *isp_reg = &ha->iobase->isp24;
/* pci func #/port # */
ql_dbg(ql_dbg_init, vha, 0x004b,
"Disabling Laser for hba: %p\n", vha);
fn = (RD_REG_DWORD(&isp_reg->ctrl_status) &
(BIT_15|BIT_14|BIT_13|BIT_12));
fn = (fn >> 12);
if (fn & 1)
reg = PORT_1_2031;
else
reg = PORT_0_2031;
data = LASER_OFF_2031;
qla83xx_wr_reg(vha, reg, data);
}
static int qla2xxx_map_queues(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = (scsi_qla_host_t *)shost->hostdata;
return blk_mq_pci_map_queues(&shost->tag_set, vha->hw->pdev);
}
static const struct pci_error_handlers qla2xxx_err_handler = {
.error_detected = qla2xxx_pci_error_detected,
.mmio_enabled = qla2xxx_pci_mmio_enabled,
.slot_reset = qla2xxx_pci_slot_reset,
.resume = qla2xxx_pci_resume,
};
static struct pci_device_id qla2xxx_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2031) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8021) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8031) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISPF001) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8044) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2071) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2271) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2261) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
static struct pci_driver qla2xxx_pci_driver = {
.name = QLA2XXX_DRIVER_NAME,
.driver = {
.owner = THIS_MODULE,
},
.id_table = qla2xxx_pci_tbl,
.probe = qla2x00_probe_one,
.remove = qla2x00_remove_one,
.shutdown = qla2x00_shutdown,
.err_handler = &qla2xxx_err_handler,
};
static const struct file_operations apidev_fops = {
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.llseek = noop_llseek,
};
/**
* qla2x00_module_init - Module initialization.
**/
static int __init
qla2x00_module_init(void)
{
int ret = 0;
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (srb_cachep == NULL) {
ql_log(ql_log_fatal, NULL, 0x0001,
"Unable to allocate SRB cache...Failing load!.\n");
return -ENOMEM;
}
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/* Initialize target kmem_cache and mem_pools */
ret = qlt_init();
if (ret < 0) {
kmem_cache_destroy(srb_cachep);
return ret;
} else if (ret > 0) {
/*
* If initiator mode is explictly disabled by qlt_init(),
* prevent scsi_transport_fc.c:fc_scsi_scan_rport() from
* performing scsi_scan_target() during LOOP UP event.
*/
qla2xxx_transport_functions.disable_target_scan = 1;
qla2xxx_transport_vport_functions.disable_target_scan = 1;
}
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
if (ql2xextended_error_logging)
strcat(qla2x00_version_str, "-debug");
if (ql2xextended_error_logging == 1)
ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
qla2xxx_transport_template =
fc_attach_transport(&qla2xxx_transport_functions);
if (!qla2xxx_transport_template) {
kmem_cache_destroy(srb_cachep);
ql_log(ql_log_fatal, NULL, 0x0002,
"fc_attach_transport failed...Failing load!.\n");
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_exit();
return -ENODEV;
}
apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
if (apidev_major < 0) {
ql_log(ql_log_fatal, NULL, 0x0003,
"Unable to register char device %s.\n", QLA2XXX_APIDEV);
}
qla2xxx_transport_vport_template =
fc_attach_transport(&qla2xxx_transport_vport_functions);
if (!qla2xxx_transport_vport_template) {
kmem_cache_destroy(srb_cachep);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_exit();
fc_release_transport(qla2xxx_transport_template);
ql_log(ql_log_fatal, NULL, 0x0004,
"fc_attach_transport vport failed...Failing load!.\n");
return -ENODEV;
}
ql_log(ql_log_info, NULL, 0x0005,
"QLogic Fibre Channel HBA Driver: %s.\n",
qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_exit();
fc_release_transport(qla2xxx_transport_template);
fc_release_transport(qla2xxx_transport_vport_template);
ql_log(ql_log_fatal, NULL, 0x0006,
"pci_register_driver failed...ret=%d Failing load!.\n",
ret);
}
return ret;
}
/**
* qla2x00_module_exit - Module cleanup.
**/
static void __exit
qla2x00_module_exit(void)
{
unregister_chrdev(apidev_major, QLA2XXX_APIDEV);
pci_unregister_driver(&qla2xxx_pci_driver);
qla2x00_release_firmware();
kmem_cache_destroy(srb_cachep);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
qlt_exit();
if (ctx_cachep)
kmem_cache_destroy(ctx_cachep);
fc_release_transport(qla2xxx_transport_template);
fc_release_transport(qla2xxx_transport_vport_template);
}
module_init(qla2x00_module_init);
module_exit(qla2x00_module_exit);
MODULE_AUTHOR("QLogic Corporation");
MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLA2XXX_VERSION);
MODULE_FIRMWARE(FW_FILE_ISP21XX);
MODULE_FIRMWARE(FW_FILE_ISP22XX);
MODULE_FIRMWARE(FW_FILE_ISP2300);
MODULE_FIRMWARE(FW_FILE_ISP2322);
MODULE_FIRMWARE(FW_FILE_ISP24XX);
MODULE_FIRMWARE(FW_FILE_ISP25XX);