linux/drivers/input/serio/parkbd.c

240 lines
5.6 KiB
C
Raw Normal View History

/*
* Parallel port to Keyboard port adapter driver for Linux
*
* Copyright (c) 1999-2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
/*
* To connect an AT or XT keyboard to the parallel port, a fairly simple adapter
* can be made:
*
* Parallel port Keyboard port
*
* +5V --------------------- +5V (4)
*
* ______
* +5V -------|______|--.
* |
* ACK (10) ------------|
* |--- KBD CLOCK (5)
* STROBE (1) ---|<|----'
*
* ______
* +5V -------|______|--.
* |
* BUSY (11) -----------|
* |--- KBD DATA (1)
* AUTOFD (14) --|<|----'
*
* GND (18-25) ------------- GND (3)
*
* The diodes can be fairly any type, and the resistors should be somewhere
* around 5 kOhm, but the adapter will likely work without the resistors,
* too.
*
* The +5V source can be taken either from USB, from mouse or keyboard ports,
* or from a joystick port. Unfortunately, the parallel port of a PC doesn't
* have a +5V pin, and feeding the keyboard from signal pins is out of question
* with 300 mA power reqirement of a typical AT keyboard.
*/
#include <linux/module.h>
#include <linux/parport.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/serio.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Parallel port to Keyboard port adapter driver");
MODULE_LICENSE("GPL");
static unsigned int parkbd_pp_no;
module_param_named(port, parkbd_pp_no, int, 0);
MODULE_PARM_DESC(port, "Parallel port the adapter is connected to (default is 0)");
static unsigned int parkbd_mode = SERIO_8042;
module_param_named(mode, parkbd_mode, uint, 0);
MODULE_PARM_DESC(mode, "Mode of operation: XT = 0/AT = 1 (default)");
#define PARKBD_CLOCK 0x01 /* Strobe & Ack */
#define PARKBD_DATA 0x02 /* AutoFd & Busy */
static int parkbd_buffer;
static int parkbd_counter;
static unsigned long parkbd_last;
static int parkbd_writing;
static unsigned long parkbd_start;
static struct pardevice *parkbd_dev;
static struct serio *parkbd_port;
static int parkbd_readlines(void)
{
return (parport_read_status(parkbd_dev->port) >> 6) ^ 2;
}
static void parkbd_writelines(int data)
{
parport_write_control(parkbd_dev->port, (~data & 3) | 0x10);
}
static int parkbd_write(struct serio *port, unsigned char c)
{
unsigned char p;
if (!parkbd_mode) return -1;
p = c ^ (c >> 4);
p = p ^ (p >> 2);
p = p ^ (p >> 1);
parkbd_counter = 0;
parkbd_writing = 1;
parkbd_buffer = c | (((int) (~p & 1)) << 8) | 0x600;
parkbd_writelines(2);
return 0;
}
static void parkbd_interrupt(void *dev_id)
{
if (parkbd_writing) {
if (parkbd_counter && ((parkbd_counter == 11) || time_after(jiffies, parkbd_last + HZ/100))) {
parkbd_counter = 0;
parkbd_buffer = 0;
parkbd_writing = 0;
parkbd_writelines(3);
return;
}
parkbd_writelines(((parkbd_buffer >> parkbd_counter++) & 1) | 2);
if (parkbd_counter == 11) {
parkbd_counter = 0;
parkbd_buffer = 0;
parkbd_writing = 0;
parkbd_writelines(3);
}
} else {
if ((parkbd_counter == parkbd_mode + 10) || time_after(jiffies, parkbd_last + HZ/100)) {
parkbd_counter = 0;
parkbd_buffer = 0;
}
parkbd_buffer |= (parkbd_readlines() >> 1) << parkbd_counter++;
if (parkbd_counter == parkbd_mode + 10)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
serio_interrupt(parkbd_port, (parkbd_buffer >> (2 - parkbd_mode)) & 0xff, 0);
}
parkbd_last = jiffies;
}
static int parkbd_getport(struct parport *pp)
{
struct pardev_cb parkbd_parport_cb;
memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb));
parkbd_parport_cb.irq_func = parkbd_interrupt;
parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
parkbd_dev = parport_register_dev_model(pp, "parkbd",
&parkbd_parport_cb, 0);
if (!parkbd_dev)
return -ENODEV;
if (parport_claim(parkbd_dev)) {
parport_unregister_device(parkbd_dev);
return -EBUSY;
}
parkbd_start = jiffies;
return 0;
}
static struct serio *parkbd_allocate_serio(void)
{
struct serio *serio;
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (serio) {
serio->id.type = parkbd_mode;
serio->write = parkbd_write,
strlcpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name));
snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", parkbd_dev->port->name);
}
return serio;
}
static void parkbd_attach(struct parport *pp)
{
if (pp->number != parkbd_pp_no) {
pr_debug("Not using parport%d.\n", pp->number);
return;
}
if (parkbd_getport(pp))
return;
parkbd_port = parkbd_allocate_serio();
if (!parkbd_port) {
parport_release(parkbd_dev);
parport_unregister_device(parkbd_dev);
return;
}
parkbd_writelines(3);
serio_register_port(parkbd_port);
printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
parkbd_mode ? "AT" : "XT", parkbd_dev->port->name);
return;
}
static void parkbd_detach(struct parport *port)
{
if (!parkbd_port || port->number != parkbd_pp_no)
return;
parport_release(parkbd_dev);
serio_unregister_port(parkbd_port);
parport_unregister_device(parkbd_dev);
parkbd_port = NULL;
}
static struct parport_driver parkbd_parport_driver = {
.name = "parkbd",
.match_port = parkbd_attach,
.detach = parkbd_detach,
.devmodel = true,
};
static int __init parkbd_init(void)
{
return parport_register_driver(&parkbd_parport_driver);
}
static void __exit parkbd_exit(void)
{
parport_unregister_driver(&parkbd_parport_driver);
}
module_init(parkbd_init);
module_exit(parkbd_exit);