linux/drivers/net/wireless/iwlwifi/mvm/mvm.h

719 lines
22 KiB
C
Raw Normal View History

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IWL_MVM_H__
#define __IWL_MVM_H__
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/leds.h>
#include <linux/in6.h>
#include "iwl-op-mode.h"
#include "iwl-trans.h"
#include "iwl-notif-wait.h"
#include "iwl-eeprom-parse.h"
#include "iwl-test.h"
#include "iwl-trans.h"
#include "sta.h"
#include "fw-api.h"
#define IWL_INVALID_MAC80211_QUEUE 0xff
#define IWL_MVM_MAX_ADDRESSES 5
/* RSSI offset for WkP */
#define IWL_RSSI_OFFSET 50
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,
IWL_MVM_TX_FIFO_BE,
IWL_MVM_TX_FIFO_VI,
IWL_MVM_TX_FIFO_VO,
};
extern struct ieee80211_ops iwl_mvm_hw_ops;
/**
* struct iwl_mvm_mod_params - module parameters for iwlmvm
* @init_dbg: if true, then the NIC won't be stopped if the INIT fw asserted.
* We will register to mac80211 to have testmode working. The NIC must not
* be up'ed after the INIT fw asserted. This is useful to be able to use
* proprietary tools over testmode to debug the INIT fw.
* @power_scheme: CAM(Continuous Active Mode)-1, BPS(Balanced Power
* Save)-2(default), LP(Low Power)-3
*/
struct iwl_mvm_mod_params {
bool init_dbg;
int power_scheme;
};
extern struct iwl_mvm_mod_params iwlmvm_mod_params;
struct iwl_mvm_phy_ctxt {
u16 id;
u16 color;
u32 ref;
/*
* TODO: This should probably be removed. Currently here only for rate
* scaling algorithm
*/
struct ieee80211_channel *channel;
};
struct iwl_mvm_time_event_data {
struct ieee80211_vif *vif;
struct list_head list;
unsigned long end_jiffies;
u32 duration;
bool running;
u32 uid;
/*
* The access to the 'id' field must be done when the
* mvm->time_event_lock is held, as it value is used to indicate
* if the te is in the time event list or not (when id == TE_MAX)
*/
u32 id;
};
/* Power management */
/**
* enum iwl_power_scheme
* @IWL_POWER_LEVEL_CAM - Continuously Active Mode
* @IWL_POWER_LEVEL_BPS - Balanced Power Save (default)
* @IWL_POWER_LEVEL_LP - Low Power
*/
enum iwl_power_scheme {
IWL_POWER_SCHEME_CAM = 1,
IWL_POWER_SCHEME_BPS,
IWL_POWER_SCHEME_LP
};
#define IWL_CONN_MAX_LISTEN_INTERVAL 70
#ifdef CONFIG_IWLWIFI_DEBUGFS
enum iwl_dbgfs_pm_mask {
MVM_DEBUGFS_PM_KEEP_ALIVE = BIT(0),
MVM_DEBUGFS_PM_SKIP_OVER_DTIM = BIT(1),
MVM_DEBUGFS_PM_SKIP_DTIM_PERIODS = BIT(2),
MVM_DEBUGFS_PM_RX_DATA_TIMEOUT = BIT(3),
MVM_DEBUGFS_PM_TX_DATA_TIMEOUT = BIT(4),
MVM_DEBUGFS_PM_DISABLE_POWER_OFF = BIT(5),
};
struct iwl_dbgfs_pm {
u8 keep_alive_seconds;
u32 rx_data_timeout;
u32 tx_data_timeout;
bool skip_over_dtim;
u8 skip_dtim_periods;
bool disable_power_off;
int mask;
};
/* beacon filtering */
enum iwl_dbgfs_bf_mask {
MVM_DEBUGFS_BF_ENERGY_DELTA = BIT(0),
MVM_DEBUGFS_BF_ROAMING_ENERGY_DELTA = BIT(1),
MVM_DEBUGFS_BF_ROAMING_STATE = BIT(2),
MVM_DEBUGFS_BF_TEMPERATURE_DELTA = BIT(3),
MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER = BIT(4),
MVM_DEBUGFS_BF_DEBUG_FLAG = BIT(5),
MVM_DEBUGFS_BF_ESCAPE_TIMER = BIT(6),
MVM_DEBUGFS_BA_ESCAPE_TIMER = BIT(7),
MVM_DEBUGFS_BA_ENABLE_BEACON_ABORT = BIT(8),
};
struct iwl_dbgfs_bf {
u8 bf_energy_delta;
u8 bf_roaming_energy_delta;
u8 bf_roaming_state;
u8 bf_temperature_delta;
u8 bf_enable_beacon_filter;
u8 bf_debug_flag;
u32 bf_escape_timer;
u32 ba_escape_timer;
u8 ba_enable_beacon_abort;
int mask;
};
#endif
enum iwl_mvm_smps_type_request {
IWL_MVM_SMPS_REQ_BT_COEX,
IWL_MVM_SMPS_REQ_TT,
NUM_IWL_MVM_SMPS_REQ,
};
/**
* struct iwl_mvm_vif - data per Virtual Interface, it is a MAC context
* @id: between 0 and 3
* @color: to solve races upon MAC addition and removal
* @ap_sta_id: the sta_id of the AP - valid only if VIF type is STA
* @uploaded: indicates the MAC context has been added to the device
* @ap_active: indicates that ap context is configured, and that the interface
* should get quota etc.
* @monitor_active: indicates that monitor context is configured, and that the
* interface should get quota etc.
* @queue_params: QoS params for this MAC
* @bcast_sta: station used for broadcast packets. Used by the following
* vifs: P2P_DEVICE, GO and AP.
* @beacon_skb: the skb used to hold the AP/GO beacon template
* @smps_requests: the requests of of differents parts of the driver, regard
the desired smps mode.
*/
struct iwl_mvm_vif {
u16 id;
u16 color;
u8 ap_sta_id;
bool uploaded;
bool ap_active;
bool monitor_active;
/* indicate whether beacon filtering is enabled */
bool bf_enabled;
u32 ap_beacon_time;
enum iwl_tsf_id tsf_id;
/*
* QoS data from mac80211, need to store this here
* as mac80211 has a separate callback but we need
* to have the data for the MAC context
*/
struct ieee80211_tx_queue_params queue_params[IEEE80211_NUM_ACS];
struct iwl_mvm_time_event_data time_event_data;
struct iwl_mvm_int_sta bcast_sta;
/*
* Assigned while mac80211 has the interface in a channel context,
* or, for P2P Device, while it exists.
*/
struct iwl_mvm_phy_ctxt *phy_ctxt;
#ifdef CONFIG_PM_SLEEP
/* WoWLAN GTK rekey data */
struct {
u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
__le64 replay_ctr;
bool valid;
} rekey_data;
int tx_key_idx;
#if IS_ENABLED(CONFIG_IPV6)
/* IPv6 addresses for WoWLAN */
struct in6_addr target_ipv6_addrs[IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS];
int num_target_ipv6_addrs;
#endif
#endif
#ifdef CONFIG_IWLWIFI_DEBUGFS
struct dentry *dbgfs_dir;
struct dentry *dbgfs_slink;
void *dbgfs_data;
struct iwl_dbgfs_pm dbgfs_pm;
struct iwl_dbgfs_bf dbgfs_bf;
#endif
enum ieee80211_smps_mode smps_requests[NUM_IWL_MVM_SMPS_REQ];
};
static inline struct iwl_mvm_vif *
iwl_mvm_vif_from_mac80211(struct ieee80211_vif *vif)
{
return (void *)vif->drv_priv;
}
enum iwl_scan_status {
IWL_MVM_SCAN_NONE,
IWL_MVM_SCAN_OS,
};
/**
* struct iwl_nvm_section - describes an NVM section in memory.
*
* This struct holds an NVM section read from the NIC using NVM_ACCESS_CMD,
* and saved for later use by the driver. Not all NVM sections are saved
* this way, only the needed ones.
*/
struct iwl_nvm_section {
u16 length;
const u8 *data;
};
/*
* Tx-backoff threshold
* @temperature: The threshold in Celsius
* @backoff: The tx-backoff in uSec
*/
struct iwl_tt_tx_backoff {
s32 temperature;
u32 backoff;
};
#define TT_TX_BACKOFF_SIZE 6
/**
* struct iwl_tt_params - thermal throttling parameters
* @ct_kill_entry: CT Kill entry threshold
* @ct_kill_exit: CT Kill exit threshold
* @ct_kill_duration: The time intervals (in uSec) in which the driver needs
* to checks whether to exit CT Kill.
* @dynamic_smps_entry: Dynamic SMPS entry threshold
* @dynamic_smps_exit: Dynamic SMPS exit threshold
* @tx_protection_entry: TX protection entry threshold
* @tx_protection_exit: TX protection exit threshold
* @tx_backoff: Array of thresholds for tx-backoff , in ascending order.
* @support_ct_kill: Support CT Kill?
* @support_dynamic_smps: Support dynamic SMPS?
* @support_tx_protection: Support tx protection?
* @support_tx_backoff: Support tx-backoff?
*/
struct iwl_tt_params {
s32 ct_kill_entry;
s32 ct_kill_exit;
u32 ct_kill_duration;
s32 dynamic_smps_entry;
s32 dynamic_smps_exit;
s32 tx_protection_entry;
s32 tx_protection_exit;
struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE];
bool support_ct_kill;
bool support_dynamic_smps;
bool support_tx_protection;
bool support_tx_backoff;
};
/**
* struct iwl_mvm_tt_mgnt - Thermal Throttling Management structure
* @ct_kill_exit: worker to exit thermal kill
* @dynamic_smps: Is thermal throttling enabled dynamic_smps?
* @tx_backoff: The current thremal throttling tx backoff in uSec.
* @params: Parameters to configure the thermal throttling algorithm.
*/
struct iwl_mvm_tt_mgmt {
struct delayed_work ct_kill_exit;
bool dynamic_smps;
u32 tx_backoff;
const struct iwl_tt_params *params;
};
struct iwl_mvm {
/* for logger access */
struct device *dev;
struct iwl_trans *trans;
const struct iwl_fw *fw;
const struct iwl_cfg *cfg;
struct iwl_phy_db *phy_db;
struct ieee80211_hw *hw;
/* for protecting access to iwl_mvm */
struct mutex mutex;
struct list_head async_handlers_list;
spinlock_t async_handlers_lock;
struct work_struct async_handlers_wk;
struct work_struct roc_done_wk;
unsigned long status;
/*
* for beacon filtering -
* currently only one interface can be supported
*/
struct iwl_mvm_vif *bf_allowed_vif;
enum iwl_ucode_type cur_ucode;
bool ucode_loaded;
bool init_ucode_run;
u32 error_event_table;
u32 log_event_table;
u32 ampdu_ref;
struct iwl_notif_wait_data notif_wait;
unsigned long transport_queue_stop;
u8 queue_to_mac80211[IWL_MAX_HW_QUEUES];
atomic_t queue_stop_count[IWL_MAX_HW_QUEUES];
struct iwl_nvm_data *nvm_data;
/* NVM sections */
struct iwl_nvm_section nvm_sections[NVM_NUM_OF_SECTIONS];
/* EEPROM MAC addresses */
struct mac_address addresses[IWL_MVM_MAX_ADDRESSES];
/* data related to data path */
struct iwl_rx_phy_info last_phy_info;
struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT];
struct work_struct sta_drained_wk;
unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)];
atomic_t pending_frames[IWL_MVM_STATION_COUNT];
/* configured by mac80211 */
u32 rts_threshold;
/* Scan status, cmd (pre-allocated) and auxiliary station */
enum iwl_scan_status scan_status;
struct iwl_scan_cmd *scan_cmd;
/* Internal station */
struct iwl_mvm_int_sta aux_sta;
u8 scan_last_antenna_idx; /* to toggle TX between antennas */
u8 mgmt_last_antenna_idx;
#ifdef CONFIG_IWLWIFI_DEBUGFS
struct dentry *debugfs_dir;
u32 dbgfs_sram_offset, dbgfs_sram_len;
bool prevent_power_down_d3;
#endif
struct iwl_mvm_phy_ctxt phy_ctxts[NUM_PHY_CTX];
struct list_head time_event_list;
spinlock_t time_event_lock;
/*
* A bitmap indicating the index of the key in use. The firmware
* can hold 16 keys at most. Reflect this fact.
*/
unsigned long fw_key_table[BITS_TO_LONGS(STA_KEY_MAX_NUM)];
/*
* This counter of created interfaces is referenced only in conjunction
* with FW limitation related to power management. Currently PM is
* supported only on a single interface.
* IMPORTANT: this variable counts all interfaces except P2P device.
*/
u8 vif_count;
struct led_classdev led;
struct ieee80211_vif *p2p_device_vif;
#ifdef CONFIG_PM_SLEEP
int gtk_ivlen, gtk_icvlen, ptk_ivlen, ptk_icvlen;
#ifdef CONFIG_IWLWIFI_DEBUGFS
iwlwifi: mvm: implement D3 testing For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-14 11:53:45 +00:00
bool d3_test_active;
bool store_d3_resume_sram;
void *d3_resume_sram;
iwlwifi: mvm: implement D3 testing For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-14 11:53:45 +00:00
u32 d3_test_pme_ptr;
#endif
#endif
/* BT-Coex */
u8 bt_kill_msk;
struct iwl_bt_coex_profile_notif last_bt_notif;
/* Thermal Throttling and CTkill */
struct iwl_mvm_tt_mgmt thermal_throttle;
s32 temperature; /* Celsius */
};
/* Extract MVM priv from op_mode and _hw */
#define IWL_OP_MODE_GET_MVM(_iwl_op_mode) \
((struct iwl_mvm *)(_iwl_op_mode)->op_mode_specific)
#define IWL_MAC80211_GET_MVM(_hw) \
IWL_OP_MODE_GET_MVM((struct iwl_op_mode *)((_hw)->priv))
enum iwl_mvm_status {
IWL_MVM_STATUS_HW_RFKILL,
IWL_MVM_STATUS_HW_CTKILL,
IWL_MVM_STATUS_ROC_RUNNING,
IWL_MVM_STATUS_IN_HW_RESTART,
};
static inline bool iwl_mvm_is_radio_killed(struct iwl_mvm *mvm)
{
return test_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status) ||
test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status);
}
extern const u8 iwl_mvm_ac_to_tx_fifo[];
struct iwl_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */
u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */
u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */
u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
};
/******************
* MVM Methods
******************/
/* uCode */
int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm);
/* Utils */
int iwl_mvm_legacy_rate_to_mac80211_idx(u32 rate_n_flags,
enum ieee80211_band band);
u8 iwl_mvm_mac80211_idx_to_hwrate(int rate_idx);
void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm);
u8 first_antenna(u8 mask);
u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx);
/* Tx / Host Commands */
int __must_check iwl_mvm_send_cmd(struct iwl_mvm *mvm,
struct iwl_host_cmd *cmd);
int __must_check iwl_mvm_send_cmd_pdu(struct iwl_mvm *mvm, u8 id,
u32 flags, u16 len, const void *data);
int __must_check iwl_mvm_send_cmd_status(struct iwl_mvm *mvm,
struct iwl_host_cmd *cmd,
u32 *status);
int __must_check iwl_mvm_send_cmd_pdu_status(struct iwl_mvm *mvm, u8 id,
u16 len, const void *data,
u32 *status);
int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
struct ieee80211_sta *sta);
int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb);
#ifdef CONFIG_IWLWIFI_DEBUG
const char *iwl_mvm_get_tx_fail_reason(u32 status);
#else
static inline const char *iwl_mvm_get_tx_fail_reason(u32 status) { return ""; }
#endif
int iwl_mvm_flush_tx_path(struct iwl_mvm *mvm, u32 tfd_msk, bool sync);
void iwl_mvm_async_handlers_purge(struct iwl_mvm *mvm);
/* Statistics */
int iwl_mvm_rx_reply_statistics(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_statistics(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
/* NVM */
int iwl_nvm_init(struct iwl_mvm *mvm);
int iwl_mvm_up(struct iwl_mvm *mvm);
int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm);
int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm);
/*
* FW notifications / CMD responses handlers
* Convention: iwl_mvm_rx_<NAME OF THE CMD>
*/
int iwl_mvm_rx_rx_phy_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_tx_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_fw_error(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
/* MVM PHY */
int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic);
int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic);
void iwl_mvm_phy_ctxt_ref(struct iwl_mvm *mvm,
struct iwl_mvm_phy_ctxt *ctxt);
void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm,
struct iwl_mvm_phy_ctxt *ctxt);
/* MAC (virtual interface) programming */
int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
void iwl_mvm_mac_ctxt_release(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
int iwl_mvm_mac_ctxt_add(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
int iwl_mvm_mac_ctxt_changed(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
int iwl_mvm_mac_ctxt_remove(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
u32 iwl_mvm_mac_get_queues_mask(struct iwl_mvm *mvm,
struct ieee80211_vif *vif);
int iwl_mvm_mac_ctxt_beacon_changed(struct iwl_mvm *mvm,
struct ieee80211_vif *vif);
int iwl_mvm_rx_beacon_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_missed_beacons_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
/* Bindings */
int iwl_mvm_binding_add_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
int iwl_mvm_binding_remove_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
/* Quota management */
int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif);
/* Scanning */
int iwl_mvm_scan_request(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
void iwl_mvm_cancel_scan(struct iwl_mvm *mvm);
/* MVM debugfs */
#ifdef CONFIG_IWLWIFI_DEBUGFS
int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir);
void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
void iwl_mvm_vif_dbgfs_clean(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
#else
static inline int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm,
struct dentry *dbgfs_dir)
{
return 0;
}
static inline void
iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
{
}
static inline void
iwl_mvm_vif_dbgfs_clean(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
{
}
#endif /* CONFIG_IWLWIFI_DEBUGFS */
/* rate scaling */
int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq,
u8 flags, bool init);
/* power managment */
int iwl_mvm_power_update_mode(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
int iwl_mvm_power_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
struct iwl_powertable_cmd *cmd);
int iwl_mvm_leds_init(struct iwl_mvm *mvm);
void iwl_mvm_leds_exit(struct iwl_mvm *mvm);
/* D3 (WoWLAN, NetDetect) */
int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
int iwl_mvm_resume(struct ieee80211_hw *hw);
void iwl_mvm_set_wakeup(struct ieee80211_hw *hw, bool enabled);
void iwl_mvm_set_rekey_data(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_gtk_rekey_data *data);
void iwl_mvm_ipv6_addr_change(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct inet6_dev *idev);
void iwl_mvm_set_default_unicast_key(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int idx);
iwlwifi: mvm: implement D3 testing For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-14 11:53:45 +00:00
extern const struct file_operations iwl_dbgfs_d3_test_ops;
/* BT Coex */
int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm);
int iwl_send_bt_init_conf(struct iwl_mvm *mvm);
int iwl_mvm_rx_bt_coex_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
enum ieee80211_rssi_event rssi_event);
void iwl_mvm_bt_coex_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
/* beacon filtering */
#ifdef CONFIG_IWLWIFI_DEBUGFS
void
iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
struct iwl_beacon_filter_cmd *cmd);
int iwl_mvm_dbgfs_set_fw_dbg_log(struct iwl_mvm *mvm);
#else
static inline void
iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
struct iwl_beacon_filter_cmd *cmd)
{}
static inline int iwl_mvm_dbgfs_set_fw_dbg_log(struct iwl_mvm *mvm)
{
return 0;
}
#endif
int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
struct ieee80211_vif *vif);
int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
struct ieee80211_vif *vif);
/* SMPS */
void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
enum iwl_mvm_smps_type_request req_type,
enum ieee80211_smps_mode smps_request);
/* Thermal management and CT-kill */
void iwl_mvm_tt_handler(struct iwl_mvm *mvm);
void iwl_mvm_tt_initialize(struct iwl_mvm *mvm);
void iwl_mvm_tt_exit(struct iwl_mvm *mvm);
void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state);
#endif /* __IWL_MVM_H__ */