leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4758ce82e6
linux/net/ipv4/ip_vti.c

675 lines
16 KiB
C
Raw Normal View History

net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
/*
* Linux NET3: IP/IP protocol decoder modified to support
* virtual tunnel interface
*
* Authors:
* Saurabh Mohan (saurabh.mohan@vyatta.com) 05/07/2012
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
/*
This version of net/ipv4/ip_vti.c is cloned of net/ipv4/ipip.c
For comments look at net/ipv4/ip_gre.c --ANK
*/
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/uaccess.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/in.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/netfilter_ipv4.h>
#include <linux/if_ether.h>
vti4: Support inter address family tunneling. With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
#include <linux/icmpv6.h>
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
#include <net/sock.h>
#include <net/ip.h>
#include <net/icmp.h>
GRE: Refactor GRE tunneling code. Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25 14:49:35 +00:00
#include <net/ip_tunnels.h>
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
#include <net/inet_ecn.h>
#include <net/xfrm.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
static struct rtnl_link_ops vti_link_ops __read_mostly;
netns: make struct pernet_operations::id unsigned int Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 01:58:21 +00:00
static unsigned int vti_net_id __read_mostly;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
static int vti_tunnel_init(struct net_device *dev);
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi,
int encap_type)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
struct ip_tunnel *tunnel;
const struct iphdr *iph = ip_hdr(skb);
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
struct net *net = dev_net(skb->dev);
struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
iph->saddr, iph->daddr, 0);
ipv4: coding style: comparison for inequality with NULL The ipv4 code uses a mixture of coding styles. In some instances check for non-NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03 08:17:27 +00:00
if (tunnel) {
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
goto drop;
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
return xfrm_input(skb, nexthdr, spi, encap_type);
}
return -EINVAL;
drop:
kfree_skb(skb);
return 0;
}
static int vti_rcv(struct sk_buff *skb)
{
XFRM_SPI_SKB_CB(skb)->family = AF_INET;
XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
return vti_input(skb, ip_hdr(skb)->protocol, 0, 0);
}
static int vti_rcv_cb(struct sk_buff *skb, int err)
{
unsigned short family;
struct net_device *dev;
struct pcpu_sw_netstats *tstats;
struct xfrm_state *x;
vti: use right inner_mode for inbound inter address family policy checks In case of inter address family tunneling (IPv6 over vti4 or IPv4 over vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are using the wrong address family. As a result, all inbound inter address family traffic is dropped. Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the inner_mode that contains the right address family for the inbound policy checks. Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-07 18:40:38 +00:00
struct xfrm_mode *inner_mode;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
struct ip_tunnel *tunnel = XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4;
ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified after completing the function. This resulted in the original skb->mark value being lost. Since we only need skb->mark to be set for xfrm_policy_check we can pull the assignment into the rcv_cb calls and then just restore the original mark after xfrm_policy_check has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-27 14:16:54 +00:00
u32 orig_mark = skb->mark;
int ret;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
if (!tunnel)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return 1;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dev = tunnel->dev;
if (err) {
dev->stats.rx_errors++;
dev->stats.rx_dropped++;
return 0;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
x = xfrm_input_state(skb);
vti: use right inner_mode for inbound inter address family policy checks In case of inter address family tunneling (IPv6 over vti4 or IPv4 over vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are using the wrong address family. As a result, all inbound inter address family traffic is dropped. Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the inner_mode that contains the right address family for the inbound policy checks. Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-07 18:40:38 +00:00
inner_mode = x->inner_mode;
if (x->sel.family == AF_UNSPEC) {
inner_mode = xfrm_ip2inner_mode(x, XFRM_MODE_SKB_CB(skb)->protocol);
if (inner_mode == NULL) {
XFRM_INC_STATS(dev_net(skb->dev),
LINUX_MIB_XFRMINSTATEMODEERROR);
return -EINVAL;
}
}
family = inner_mode->afinfo->family;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified after completing the function. This resulted in the original skb->mark value being lost. Since we only need skb->mark to be set for xfrm_policy_check we can pull the assignment into the rcv_cb calls and then just restore the original mark after xfrm_policy_check has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-27 14:16:54 +00:00
skb->mark = be32_to_cpu(tunnel->parms.i_key);
ret = xfrm_policy_check(NULL, XFRM_POLICY_IN, skb, family);
skb->mark = orig_mark;
if (!ret)
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
return -EPERM;
skb_scrub_packet(skb, !net_eq(tunnel->net, dev_net(skb->dev)));
skb->dev = dev;
tstats = this_cpu_ptr(dev->tstats);
u64_stats_update_begin(&tstats->syncp);
tstats->rx_packets++;
tstats->rx_bytes += skb->len;
u64_stats_update_end(&tstats->syncp);
return 0;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
vti4: Check the tunnel endpoints of the xfrm state and the vti interface The tunnel endpoints of the xfrm_state we got from the xfrm_lookup must match the tunnel endpoints of the vti interface. This patch ensures this matching. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:11 +00:00
static bool vti_state_check(const struct xfrm_state *x, __be32 dst, __be32 src)
{
xfrm_address_t *daddr = (xfrm_address_t *)&dst;
xfrm_address_t *saddr = (xfrm_address_t *)&src;
/* if there is no transform then this tunnel is not functional.
* Or if the xfrm is not mode tunnel.
*/
if (!x || x->props.mode != XFRM_MODE_TUNNEL ||
x->props.family != AF_INET)
return false;
if (!dst)
return xfrm_addr_equal(saddr, &x->props.saddr, AF_INET);
if (!xfrm_state_addr_check(x, daddr, saddr, AF_INET))
return false;
return true;
}
vti4: Support inter address family tunneling. With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
struct flowi *fl)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
struct ip_tunnel *tunnel = netdev_priv(dev);
vti4: Check the tunnel endpoints of the xfrm state and the vti interface The tunnel endpoints of the xfrm_state we got from the xfrm_lookup must match the tunnel endpoints of the vti interface. This patch ensures this matching. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:11 +00:00
struct ip_tunnel_parm *parms = &tunnel->parms;
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
struct dst_entry *dst = skb_dst(skb);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
struct net_device *tdev; /* Device to other host */
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
int err;
vti: Add pmtu handling to vti_xmit. We currently rely on the PMTU discovery of xfrm. However if a packet is locally sent, the PMTU mechanism of xfrm tries to do local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti_xmit to report MTU changes immediately. Reported-by: Mark McKinstry <Mark.McKinstry@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-03-16 09:17:37 +00:00
int mtu;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
if (!dst) {
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dst_hold(dst);
vti4: Support inter address family tunneling. With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dst = xfrm_lookup(tunnel->net, dst, fl, NULL, 0);
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
if (IS_ERR(dst)) {
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
vti4: Check the tunnel endpoints of the xfrm state and the vti interface The tunnel endpoints of the xfrm_state we got from the xfrm_lookup must match the tunnel endpoints of the vti interface. This patch ensures this matching. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:11 +00:00
if (!vti_state_check(dst->xfrm, parms->iph.daddr, parms->iph.saddr)) {
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
dev->stats.tx_carrier_errors++;
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dst_release(dst);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
goto tx_error_icmp;
}
vti4: Check the tunnel endpoints of the xfrm state and the vti interface The tunnel endpoints of the xfrm_state we got from the xfrm_lookup must match the tunnel endpoints of the vti interface. This patch ensures this matching. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:11 +00:00
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
tdev = dst->dev;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
if (tdev == dev) {
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
dst_release(dst);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
dev->stats.collisions++;
goto tx_error;
}
if (tunnel->err_count > 0) {
if (time_before(jiffies,
tunnel->err_time + IPTUNNEL_ERR_TIMEO)) {
tunnel->err_count--;
dst_link_failure(skb);
} else
tunnel->err_count = 0;
}
vti: Add pmtu handling to vti_xmit. We currently rely on the PMTU discovery of xfrm. However if a packet is locally sent, the PMTU mechanism of xfrm tries to do local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti_xmit to report MTU changes immediately. Reported-by: Mark McKinstry <Mark.McKinstry@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-03-16 09:17:37 +00:00
mtu = dst_mtu(dst);
if (skb->len > mtu) {
skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
if (skb->protocol == htons(ETH_P_IP)) {
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
htonl(mtu));
} else {
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
}
dst_release(dst);
goto tx_error;
}
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
skb_scrub_packet(skb, !net_eq(tunnel->net, dev_net(dev)));
vti4: Use the on xfrm_lookup returned dst_entry directly We need to be protocol family indepenent to support inter addresss family tunneling with vti. So use a dst_entry instead of the ipv4 rtable in vti_tunnel_xmit. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
skb_dst_set(skb, dst);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
skb->dev = skb_dst(skb)->dev;
net: Pass net into dst_output and remove dst_output_okfn Replace dst_output_okfn with dst_output Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 21:48:35 +00:00
err = dst_output(tunnel->net, skb->sk, skb);
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
if (net_xmit_eval(err) == 0)
err = skb->len;
ip_tunnel: Move stats update to iptunnel_xmit() By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-24 22:34:54 +00:00
iptunnel_xmit_stats(dev, err);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return NETDEV_TX_OK;
tx_error_icmp:
dst_link_failure(skb);
tx_error:
dev->stats.tx_errors++;
ipv4: be friend with drop monitor Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 02:27:49 +00:00
kfree_skb(skb);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return NETDEV_TX_OK;
}
vti4: Support inter address family tunneling. With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
/* This function assumes it is being called from dev_queue_xmit()
* and that skb is filled properly by that function.
*/
static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct flowi fl;
memset(&fl, 0, sizeof(fl));
switch (skb->protocol) {
case htons(ETH_P_IP):
xfrm_decode_session(skb, &fl, AF_INET);
memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
break;
case htons(ETH_P_IPV6):
xfrm_decode_session(skb, &fl, AF_INET6);
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
break;
default:
dev->stats.tx_errors++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
ip_vti/ip6_vti: Do not touch skb->mark on xmit Instead of modifying skb->mark we can simply modify the flowi_mark that is generated as a result of the xfrm_decode_session. By doing this we don't need to actually touch the skb->mark and it can be preserved as it passes out through the tunnel. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-27 14:16:43 +00:00
/* override mark with tunnel output key */
fl.flowi_mark = be32_to_cpu(tunnel->parms.o_key);
vti4: Support inter address family tunneling. With this patch we can tunnel ipv6 traffic via a vti4 interface. A vti4 interface can now have an ipv6 address and ipv6 traffic can be routed via a vti4 interface. The resulting traffic is xfrm transformed and tunneled throuhg ipv4 if matching IPsec policies and states are present. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
return vti_xmit(skb, dev, &fl);
}
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
static int vti4_err(struct sk_buff *skb, u32 info)
{
__be32 spi;
vti: Use the tunnel mark for lookup in the error handlers. We need to use the mark we get from the tunnels o_key to lookup the right vti state in the error handlers. This patch ensures that. Fixes: df3893c1 ("vti: Update the ipv4 side to use it's own receive hook.") Fixes: fa9ad96d ("vti6: Update the ipv6 side to use its own receive hook.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-12 07:09:26 +00:00
__u32 mark;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
struct xfrm_state *x;
struct ip_tunnel *tunnel;
struct ip_esp_hdr *esph;
struct ip_auth_hdr *ah ;
struct ip_comp_hdr *ipch;
struct net *net = dev_net(skb->dev);
const struct iphdr *iph = (const struct iphdr *)skb->data;
int protocol = iph->protocol;
struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
iph->daddr, iph->saddr, 0);
if (!tunnel)
return -1;
vti: Use the tunnel mark for lookup in the error handlers. We need to use the mark we get from the tunnels o_key to lookup the right vti state in the error handlers. This patch ensures that. Fixes: df3893c1 ("vti: Update the ipv4 side to use it's own receive hook.") Fixes: fa9ad96d ("vti6: Update the ipv6 side to use its own receive hook.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-12 07:09:26 +00:00
mark = be32_to_cpu(tunnel->parms.o_key);
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
switch (protocol) {
case IPPROTO_ESP:
esph = (struct ip_esp_hdr *)(skb->data+(iph->ihl<<2));
spi = esph->spi;
break;
case IPPROTO_AH:
ah = (struct ip_auth_hdr *)(skb->data+(iph->ihl<<2));
spi = ah->spi;
break;
case IPPROTO_COMP:
ipch = (struct ip_comp_hdr *)(skb->data+(iph->ihl<<2));
spi = htonl(ntohs(ipch->cpi));
break;
default:
return 0;
}
switch (icmp_hdr(skb)->type) {
case ICMP_DEST_UNREACH:
if (icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
return 0;
case ICMP_REDIRECT:
break;
default:
return 0;
}
vti: Use the tunnel mark for lookup in the error handlers. We need to use the mark we get from the tunnels o_key to lookup the right vti state in the error handlers. This patch ensures that. Fixes: df3893c1 ("vti: Update the ipv4 side to use it's own receive hook.") Fixes: fa9ad96d ("vti6: Update the ipv6 side to use its own receive hook.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-12 07:09:26 +00:00
x = xfrm_state_lookup(net, mark, (const xfrm_address_t *)&iph->daddr,
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
spi, protocol, AF_INET);
if (!x)
return 0;
if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH)
ipv4_update_pmtu(skb, net, info, 0, 0, protocol, 0);
else
ipv4_redirect(skb, net, 0, 0, protocol, 0);
xfrm_state_put(x);
return 0;
}
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
static int
vti_tunnel_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
int err = 0;
struct ip_tunnel_parm p;
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
if (copy_from_user(&p, ifr->ifr_ifru.ifru_data, sizeof(p)))
return -EFAULT;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
if (cmd == SIOCADDTUNNEL || cmd == SIOCCHGTUNNEL) {
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
if (p.iph.version != 4 || p.iph.protocol != IPPROTO_IPIP ||
p.iph.ihl != 5)
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
return -EINVAL;
}
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
ip_vti: Fix 'ip tunnel add' with 'key' parameters ip tunnel add remote 10.2.2.1 local 10.2.2.2 mode vti ikey 1 okey 2 translates to p->iflags = VTI_ISVTI|GRE_KEY and p->i_key = 1, but GRE_KEY != TUNNEL_KEY, so ip_tunnel_ioctl would set i_key to 0 (same story with o_key) making us unable to create vti tunnels with [io]key via ip tunnel. We cannot simply translate GRE_KEY to TUNNEL_KEY (as GRE module does) because vti_tunnels with same local/remote addresses but different ikeys will be treated as different then. So, imo the best option here is to move p->i_flags & *_KEY check for vti tunnels from ip_tunnel.c to ip_vti.c and to think about [io]_mark field for ip_tunnel_parm in the future. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-07 22:06:25 +00:00
if (!(p.i_flags & GRE_KEY))
p.i_key = 0;
if (!(p.o_flags & GRE_KEY))
p.o_key = 0;
p.i_flags = VTI_ISVTI;
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
err = ip_tunnel_ioctl(dev, &p, cmd);
if (err)
return err;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
if (cmd != SIOCDELTUNNEL) {
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
p.i_flags |= GRE_KEY;
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
p.o_flags |= GRE_KEY;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p)))
return -EFAULT;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return 0;
}
static const struct net_device_ops vti_netdev_ops = {
.ndo_init = vti_tunnel_init,
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
.ndo_uninit = ip_tunnel_uninit,
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
.ndo_start_xmit = vti_tunnel_xmit,
.ndo_do_ioctl = vti_tunnel_ioctl,
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
.ndo_change_mtu = ip_tunnel_change_mtu,
Tunneling: use IP Tunnel stats APIs. Use common function get calculate rtnl_link_stats64 stats. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25 14:50:00 +00:00
.ndo_get_stats64 = ip_tunnel_get_stats64,
ipip,gre,vti,sit: implement ndo_get_iflink Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 15:07:02 +00:00
.ndo_get_iflink = ip_tunnel_get_iflink,
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
};
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
static void vti_tunnel_setup(struct net_device *dev)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
dev->netdev_ops = &vti_netdev_ops;
vti: don't allow to add the same tunnel twice Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11 13:51:19 +00:00
dev->type = ARPHRD_TUNNEL;
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
ip_tunnel_setup(dev, vti_net_id);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
static int vti_tunnel_init(struct net_device *dev)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
struct ip_tunnel *tunnel = netdev_priv(dev);
struct iphdr *iph = &tunnel->parms.iph;
memcpy(dev->dev_addr, &iph->saddr, 4);
memcpy(dev->broadcast, &iph->daddr, 4);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
dev->hard_header_len = LL_MAX_HEADER + sizeof(struct iphdr);
dev->mtu = ETH_DATA_LEN;
dev->flags = IFF_NOARP;
dev->addr_len = 4;
dev->features |= NETIF_F_LLTX;
net: better IFF_XMIT_DST_RELEASE support Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 01:38:35 +00:00
netif_keep_dst(dev);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
return ip_tunnel_init(dev);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
static void __net_init vti_fb_tunnel_init(struct net_device *dev)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct iphdr *iph = &tunnel->parms.iph;
iph->version = 4;
iph->protocol = IPPROTO_IPIP;
iph->ihl = 5;
}
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
static struct xfrm4_protocol vti_esp4_protocol __read_mostly = {
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
.handler = vti_rcv,
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
.input_handler = vti_input,
.cb_handler = vti_rcv_cb,
.err_handler = vti4_err,
.priority = 100,
};
static struct xfrm4_protocol vti_ah4_protocol __read_mostly = {
.handler = vti_rcv,
.input_handler = vti_input,
.cb_handler = vti_rcv_cb,
.err_handler = vti4_err,
.priority = 100,
};
static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = {
.handler = vti_rcv,
.input_handler = vti_input,
.cb_handler = vti_rcv_cb,
.err_handler = vti4_err,
.priority = 100,
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
};
static int __net_init vti_init_net(struct net *net)
{
int err;
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
struct ip_tunnel_net *itn;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
err = ip_tunnel_init_net(net, vti_net_id, &vti_link_ops, "ip_vti0");
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
if (err)
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
return err;
itn = net_generic(net, vti_net_id);
vti_fb_tunnel_init(itn->fb_tunnel_dev);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return 0;
}
static void __net_exit vti_exit_net(struct net *net)
{
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
ipip: add x-netns support This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:51:11 +00:00
ip_tunnel_delete_net(itn, &vti_link_ops);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
static struct pernet_operations vti_net_ops = {
.init = vti_init_net,
.exit = vti_exit_net,
.id = &vti_net_id,
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
.size = sizeof(struct ip_tunnel_net),
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
};
net: add netlink_ext_ack argument to rtnl_link_ops.validate Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 21:56:01 +00:00
static int vti_tunnel_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
return 0;
}
static void vti_netlink_parms(struct nlattr *data[],
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
struct ip_tunnel_parm *parms,
__u32 *fwmark)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
memset(parms, 0, sizeof(*parms));
parms->iph.protocol = IPPROTO_IPIP;
if (!data)
return;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
parms->i_flags = VTI_ISVTI;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
if (data[IFLA_VTI_LINK])
parms->link = nla_get_u32(data[IFLA_VTI_LINK]);
if (data[IFLA_VTI_IKEY])
parms->i_key = nla_get_be32(data[IFLA_VTI_IKEY]);
if (data[IFLA_VTI_OKEY])
parms->o_key = nla_get_be32(data[IFLA_VTI_OKEY]);
if (data[IFLA_VTI_LOCAL])
netlink: implement nla_get_in_addr and nla_get_in6_addr Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 14:59:26 +00:00
parms->iph.saddr = nla_get_in_addr(data[IFLA_VTI_LOCAL]);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
if (data[IFLA_VTI_REMOTE])
netlink: implement nla_get_in_addr and nla_get_in6_addr Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 14:59:26 +00:00
parms->iph.daddr = nla_get_in_addr(data[IFLA_VTI_REMOTE]);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
if (data[IFLA_VTI_FWMARK])
*fwmark = nla_get_u32(data[IFLA_VTI_FWMARK]);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
static int vti_newlink(struct net *src_net, struct net_device *dev,
net: add netlink_ext_ack argument to rtnl_link_ops.newlink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 21:55:59 +00:00
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
vti: switch to new ip tunnel code GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-21 02:46:25 +00:00
struct ip_tunnel_parm parms;
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
__u32 fwmark = 0;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
vti_netlink_parms(data, &parms, &fwmark);
return ip_tunnel_newlink(dev, tb, &parms, fwmark);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
static int vti_changelink(struct net_device *dev, struct nlattr *tb[],
net: add netlink_ext_ack argument to rtnl_link_ops.changelink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 21:56:00 +00:00
struct nlattr *data[],
struct netlink_ext_ack *extack)
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
{
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
struct ip_tunnel *t = netdev_priv(dev);
__u32 fwmark = t->fwmark;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
struct ip_tunnel_parm p;
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
vti_netlink_parms(data, &p, &fwmark);
return ip_tunnel_changelink(dev, tb, &p, fwmark);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
static size_t vti_get_size(const struct net_device *dev)
{
return
/* IFLA_VTI_LINK */
nla_total_size(4) +
/* IFLA_VTI_IKEY */
nla_total_size(4) +
/* IFLA_VTI_OKEY */
nla_total_size(4) +
/* IFLA_VTI_LOCAL */
nla_total_size(4) +
/* IFLA_VTI_REMOTE */
nla_total_size(4) +
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
/* IFLA_VTI_FWMARK */
nla_total_size(4) +
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
0;
}
static int vti_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct ip_tunnel *t = netdev_priv(dev);
struct ip_tunnel_parm *p = &t->parms;
vti: check nla_put_* return value Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 09:57:13 +00:00
if (nla_put_u32(skb, IFLA_VTI_LINK, p->link) ||
nla_put_be32(skb, IFLA_VTI_IKEY, p->i_key) ||
nla_put_be32(skb, IFLA_VTI_OKEY, p->o_key) ||
nla_put_in_addr(skb, IFLA_VTI_LOCAL, p->iph.saddr) ||
nla_put_in_addr(skb, IFLA_VTI_REMOTE, p->iph.daddr) ||
nla_put_u32(skb, IFLA_VTI_FWMARK, t->fwmark))
return -EMSGSIZE;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return 0;
}
static const struct nla_policy vti_policy[IFLA_VTI_MAX + 1] = {
[IFLA_VTI_LINK] = { .type = NLA_U32 },
[IFLA_VTI_IKEY] = { .type = NLA_U32 },
[IFLA_VTI_OKEY] = { .type = NLA_U32 },
[IFLA_VTI_LOCAL] = { .len = FIELD_SIZEOF(struct iphdr, saddr) },
[IFLA_VTI_REMOTE] = { .len = FIELD_SIZEOF(struct iphdr, daddr) },
ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19 16:30:54 +00:00
[IFLA_VTI_FWMARK] = { .type = NLA_U32 },
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
};
static struct rtnl_link_ops vti_link_ops __read_mostly = {
.kind = "vti",
.maxtype = IFLA_VTI_MAX,
.policy = vti_policy,
.priv_size = sizeof(struct ip_tunnel),
.setup = vti_tunnel_setup,
.validate = vti_tunnel_validate,
.newlink = vti_newlink,
.changelink = vti_changelink,
ip_tunnel: the lack of vti_link_ops' dellink() cause kernel panic Now the vti_link_ops do not point the .dellink, for fb tunnel device (ip_vti0), the net_device will be removed as the default .dellink is unregister_netdevice_queue,but the tunnel still in the tunnel list, then if we add a new vti tunnel, in ip_tunnel_find(): hlist_for_each_entry_rcu(t, head, hash_node) { if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr && link == t->parms.link && ==> type == t->dev->type && ip_tunnel_key_match(&t->parms, flags, key)) break; } the panic will happen, cause dev of ip_tunnel *t is null: [ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel] [ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0 [ 3835.073008] Oops: 0000 [#1] SMP ..... [ 3835.073008] Stack: [ 3835.073008] ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0 [ 3835.073008] ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858 [ 3835.073008] ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000 [ 3835.073008] Call Trace: [ 3835.073008] [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel] [ 3835.073008] [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti] [ 3835.073008] [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0 [ 3835.073008] [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70 [ 3835.073008] [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60 [ 3835.073008] [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0 [ 3835.073008] [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270 [ 3835.073008] [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90 [ 3835.073008] [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30 [ 3835.073008] [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0 [ 3835.073008] [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30 .... modprobe ip_vti ip link del ip_vti0 type vti ip link add ip_vti0 type vti rmmod ip_vti do that one or more times, kernel will panic. fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in which we skip the unregister of fb tunnel device. do the same on ip6_vti. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23 07:04:11 +00:00
.dellink = ip_tunnel_dellink,
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
.get_size = vti_get_size,
.fill_info = vti_fill_info,
tunnels: advertise link netns via netlink Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 14:11:17 +00:00
.get_link_net = ip_tunnel_get_link_net,
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
};
vti: flush x-netns xfrm cache when vti interface is removed When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09 19:29:42 +00:00
static bool is_vti_tunnel(const struct net_device *dev)
{
return dev->netdev_ops == &vti_netdev_ops;
}
static int vti_device_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct ip_tunnel *tunnel = netdev_priv(dev);
if (!is_vti_tunnel(dev))
return NOTIFY_DONE;
switch (event) {
case NETDEV_DOWN:
if (!net_eq(tunnel->net, dev_net(dev)))
xfrm_garbage_collect(tunnel->net);
break;
}
return NOTIFY_DONE;
}
static struct notifier_block vti_notifier_block __read_mostly = {
.notifier_call = vti_device_event,
};
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
static int __init vti_init(void)
{
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
const char *msg;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
int err;
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
pr_info("IPv4 over IPsec tunneling driver\n");
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: flush x-netns xfrm cache when vti interface is removed When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09 19:29:42 +00:00
register_netdevice_notifier(&vti_notifier_block);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
msg = "tunnel device";
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
err = register_pernet_device(&vti_net_ops);
if (err < 0)
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
goto pernet_dev_failed;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
msg = "tunnel protocols";
err = xfrm4_protocol_register(&vti_esp4_protocol, IPPROTO_ESP);
if (err < 0)
goto xfrm_proto_esp_failed;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
err = xfrm4_protocol_register(&vti_ah4_protocol, IPPROTO_AH);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
if (err < 0)
goto xfrm_proto_ah_failed;
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
err = xfrm4_protocol_register(&vti_ipcomp4_protocol, IPPROTO_COMP);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
if (err < 0)
goto xfrm_proto_comp_failed;
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
msg = "netlink interface";
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
err = rtnl_link_register(&vti_link_ops);
if (err < 0)
goto rtnl_link_failed;
return err;
rtnl_link_failed:
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
xfrm_proto_comp_failed:
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
xfrm_proto_ah_failed:
vti: Update the ipv4 side to use it's own receive hook. With this patch, vti uses the IPsec protocol multiplexer to register it's own receive side hooks for ESP, AH and IPCOMP. Vti now does the following on receive side: 1. Do an input policy check for the IPsec packet we received. This is required because this packet could be already prosecces by IPsec, so an inbuond policy check is needed. 2. Mark the packet with the i_key. The policy and the state must match this key now. Policy and state belong to the outer namespace and policy enforcement is done at the further layers. 3. Call the generic xfrm layer to do decryption and decapsulation. 4. Wait for a callback from the xfrm layer to properly clean the skb to not leak informations on namespace and to update the device statistics. On transmit side: 1. Mark the packet with the o_key. The policy and the state must match this key now. 2. Do a xfrm_lookup on the original packet with the mark applied. 3. Check if we got an IPsec route. 4. Clean the skb to not leak informations on namespace transitions. 5. Attach the dst_enty we got from the xfrm_lookup to the skb. 6. Call dst_output to do the IPsec processing. 7. Do the device statistics. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-21 07:41:10 +00:00
xfrm4_protocol_deregister(&vti_esp4_protocol, IPPROTO_ESP);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
xfrm_proto_esp_failed:
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
unregister_pernet_device(&vti_net_ops);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
pernet_dev_failed:
vti: flush x-netns xfrm cache when vti interface is removed When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09 19:29:42 +00:00
unregister_netdevice_notifier(&vti_notifier_block);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
pr_err("vti init: failed to register %s\n", msg);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
return err;
}
static void __exit vti_fini(void)
{
rtnl_link_unregister(&vti_link_ops);
vti: Simplify error handling in module init and exit The error handling in the module init and exit functions can be shortened to safe us some code. 1/ Remove the code duplications in the init function, jump straight to the existing cleanup code by adding some labels. Also give the error message some more value by telling the reason why loading the module has failed. Furthermore fix the "IPSec" typo -- it should be "IPsec" instead. 2/ Remove the error handling in the exit function as the only legitimate reason xfrm4_protocol_deregister() might fail is inet_del_protocol() returning -1. That, in turn, means some other protocol handler had been registered for this very protocol in the meantime. But that essentially means we haven't been handling that protocol any more, anyway. What it definitely means not is that we "can't deregister tunnel". Therefore just get rid of that bogus warning. It's plain wrong. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-09 21:43:42 +00:00
xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
xfrm4_protocol_deregister(&vti_esp4_protocol, IPPROTO_ESP);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
unregister_pernet_device(&vti_net_ops);
vti: flush x-netns xfrm cache when vti interface is removed When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09 19:29:42 +00:00
unregister_netdevice_notifier(&vti_notifier_block);
net/ipv4: VTI support new module for ip_vti. New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:44:54 +00:00
}
module_init(vti_init);
module_exit(vti_fini);
MODULE_LICENSE("GPL");
MODULE_ALIAS_RTNL_LINK("vti");
MODULE_ALIAS_NETDEV("ip_vti0");
Reference in New Issue Copy Permalink