linux/drivers/acpi/executer/exconfig.c

502 lines
14 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes)
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acinterp.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
#include <acpi/acevents.h>
#include <acpi/actables.h>
#include <acpi/acdispat.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exconfig")
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
/* Local prototypes */
static acpi_status
acpi_ex_add_table(struct acpi_table_header *table,
struct acpi_namespace_node *parent_node,
union acpi_operand_object **ddb_handle);
/*******************************************************************************
*
* FUNCTION: acpi_ex_add_table
*
* PARAMETERS: Table - Pointer to raw table
* parent_node - Where to load the table (scope)
* ddb_handle - Where to return the table handle.
*
* RETURN: Status
*
* DESCRIPTION: Common function to Install and Load an ACPI table with a
* returned table handle.
*
******************************************************************************/
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
static acpi_status
acpi_ex_add_table(struct acpi_table_header *table,
struct acpi_namespace_node *parent_node,
union acpi_operand_object **ddb_handle)
{
acpi_status status;
struct acpi_table_desc table_info;
union acpi_operand_object *obj_desc;
ACPI_FUNCTION_TRACE("ex_add_table");
/* Create an object to be the table handle */
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE);
if (!obj_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Init the table handle */
obj_desc->reference.opcode = AML_LOAD_OP;
*ddb_handle = obj_desc;
/* Install the new table into the local data structures */
ACPI_MEMSET(&table_info, 0, sizeof(struct acpi_table_desc));
table_info.type = ACPI_TABLE_SSDT;
table_info.pointer = table;
table_info.length = (acpi_size) table->length;
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
table_info.allocation = ACPI_MEM_ALLOCATED;
status = acpi_tb_install_table(&table_info);
obj_desc->reference.object = table_info.installed_desc;
if (ACPI_FAILURE(status)) {
if (status == AE_ALREADY_EXISTS) {
/* Table already exists, just return the handle */
return_ACPI_STATUS(AE_OK);
}
goto cleanup;
}
/* Add the table to the namespace */
status = acpi_ns_load_table(table_info.installed_desc, parent_node);
if (ACPI_FAILURE(status)) {
/* Uninstall table on error */
(void)acpi_tb_uninstall_table(table_info.installed_desc);
goto cleanup;
}
return_ACPI_STATUS(AE_OK);
cleanup:
acpi_ut_remove_reference(obj_desc);
*ddb_handle = NULL;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_load_table_op
*
* PARAMETERS: walk_state - Current state with operands
* return_desc - Where to store the return object
*
* RETURN: Status
*
* DESCRIPTION: Load an ACPI table
*
******************************************************************************/
acpi_status
acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
union acpi_operand_object **return_desc)
{
acpi_status status;
union acpi_operand_object **operand = &walk_state->operands[0];
struct acpi_table_header *table;
struct acpi_namespace_node *parent_node;
struct acpi_namespace_node *start_node;
struct acpi_namespace_node *parameter_node = NULL;
union acpi_operand_object *ddb_handle;
ACPI_FUNCTION_TRACE("ex_load_table_op");
#if 0
/*
* Make sure that the signature does not match one of the tables that
* is already loaded.
*/
status = acpi_tb_match_signature(operand[0]->string.pointer, NULL);
if (status == AE_OK) {
/* Signature matched -- don't allow override */
return_ACPI_STATUS(AE_ALREADY_EXISTS);
}
#endif
/* Find the ACPI table */
status = acpi_tb_find_table(operand[0]->string.pointer,
operand[1]->string.pointer,
operand[2]->string.pointer, &table);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
return_ACPI_STATUS(status);
}
/* Table not found, return an Integer=0 and AE_OK */
ddb_handle = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!ddb_handle) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
ddb_handle->integer.value = 0;
*return_desc = ddb_handle;
return_ACPI_STATUS(AE_OK);
}
/* Default nodes */
start_node = walk_state->scope_info->scope.node;
parent_node = acpi_gbl_root_node;
/* root_path (optional parameter) */
if (operand[3]->string.length > 0) {
/*
* Find the node referenced by the root_path_string. This is the
* location within the namespace where the table will be loaded.
*/
status =
acpi_ns_get_node_by_path(operand[3]->string.pointer,
start_node, ACPI_NS_SEARCH_PARENT,
&parent_node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/* parameter_path (optional parameter) */
if (operand[4]->string.length > 0) {
if ((operand[4]->string.pointer[0] != '\\') &&
(operand[4]->string.pointer[0] != '^')) {
/*
* Path is not absolute, so it will be relative to the node
* referenced by the root_path_string (or the NS root if omitted)
*/
start_node = parent_node;
}
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
/* Find the node referenced by the parameter_path_string */
status =
acpi_ns_get_node_by_path(operand[4]->string.pointer,
start_node, ACPI_NS_SEARCH_PARENT,
&parameter_node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/* Load the table into the namespace */
status = acpi_ex_add_table(table, parent_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Parameter Data (optional) */
if (parameter_node) {
/* Store the parameter data into the optional parameter object */
status = acpi_ex_store(operand[5],
ACPI_CAST_PTR(union acpi_operand_object,
parameter_node),
walk_state);
if (ACPI_FAILURE(status)) {
(void)acpi_ex_unload_table(ddb_handle);
return_ACPI_STATUS(status);
}
}
*return_desc = ddb_handle;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_load_op
*
* PARAMETERS: obj_desc - Region or Field where the table will be
* obtained
* Target - Where a handle to the table will be stored
* walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Load an ACPI table from a field or operation region
*
******************************************************************************/
acpi_status
acpi_ex_load_op(union acpi_operand_object *obj_desc,
union acpi_operand_object *target,
struct acpi_walk_state *walk_state)
{
acpi_status status;
union acpi_operand_object *ddb_handle;
union acpi_operand_object *buffer_desc = NULL;
struct acpi_table_header *table_ptr = NULL;
acpi_physical_address address;
struct acpi_table_header table_header;
u32 i;
ACPI_FUNCTION_TRACE("ex_load_op");
/* Object can be either an op_region or a Field */
switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
case ACPI_TYPE_REGION:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Load from Region %p %s\n",
obj_desc,
acpi_ut_get_object_type_name(obj_desc)));
/*
* If the Region Address and Length have not been previously evaluated,
* evaluate them now and save the results.
*/
if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
status = acpi_ds_get_region_arguments(obj_desc);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/* Get the base physical address of the region */
address = obj_desc->region.address;
/* Get the table length from the table header */
table_header.length = 0;
for (i = 0; i < 8; i++) {
status =
acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
(acpi_physical_address)
(i + address), 8,
((u8 *) &
table_header) + i);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/* Sanity check the table length */
if (table_header.length < sizeof(struct acpi_table_header)) {
return_ACPI_STATUS(AE_BAD_HEADER);
}
/* Allocate a buffer for the entire table */
table_ptr = ACPI_MEM_ALLOCATE(table_header.length);
if (!table_ptr) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Get the entire table from the op region */
for (i = 0; i < table_header.length; i++) {
status =
acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
(acpi_physical_address)
(i + address), 8,
((u8 *) table_ptr +
i));
if (ACPI_FAILURE(status)) {
goto cleanup;
}
}
break;
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Load from Field %p %s\n",
obj_desc,
acpi_ut_get_object_type_name(obj_desc)));
/*
* The length of the field must be at least as large as the table.
* Read the entire field and thus the entire table. Buffer is
* allocated during the read.
*/
status =
acpi_ex_read_data_from_field(walk_state, obj_desc,
&buffer_desc);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
table_ptr = ACPI_CAST_PTR(struct acpi_table_header,
buffer_desc->buffer.pointer);
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
/* All done with the buffer_desc, delete it */
buffer_desc->buffer.pointer = NULL;
acpi_ut_remove_reference(buffer_desc);
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
/* Sanity check the table length */
if (table_ptr->length < sizeof(struct acpi_table_header)) {
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
status = AE_BAD_HEADER;
goto cleanup;
}
break;
default:
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/* The table must be either an SSDT or a PSDT */
if ((!ACPI_STRNCMP(table_ptr->signature,
acpi_gbl_table_data[ACPI_TABLE_PSDT].signature,
acpi_gbl_table_data[ACPI_TABLE_PSDT].sig_length)) &&
(!ACPI_STRNCMP(table_ptr->signature,
acpi_gbl_table_data[ACPI_TABLE_SSDT].signature,
acpi_gbl_table_data[ACPI_TABLE_SSDT].sig_length))) {
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
ACPI_ERROR((AE_INFO,
"Table has invalid signature [%4.4s], must be SSDT or PSDT",
table_ptr->signature));
status = AE_BAD_SIGNATURE;
goto cleanup;
}
/* Install the new table into the local data structures */
status = acpi_ex_add_table(table_ptr, acpi_gbl_root_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
/* On error, table_ptr was deallocated above */
return_ACPI_STATUS(status);
}
/* Store the ddb_handle into the Target operand */
status = acpi_ex_store(ddb_handle, target, walk_state);
if (ACPI_FAILURE(status)) {
(void)acpi_ex_unload_table(ddb_handle);
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
/* table_ptr was deallocated above */
return_ACPI_STATUS(status);
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 04:00:00 +00:00
}
cleanup:
if (ACPI_FAILURE(status)) {
ACPI_MEM_FREE(table_ptr);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_unload_table
*
* PARAMETERS: ddb_handle - Handle to a previously loaded table
*
* RETURN: Status
*
* DESCRIPTION: Unload an ACPI table
*
******************************************************************************/
acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
{
acpi_status status = AE_OK;
union acpi_operand_object *table_desc = ddb_handle;
struct acpi_table_desc *table_info;
ACPI_FUNCTION_TRACE("ex_unload_table");
/*
* Validate the handle
* Although the handle is partially validated in acpi_ex_reconfiguration(),
* when it calls acpi_ex_resolve_operands(), the handle is more completely
* validated here.
*/
if ((!ddb_handle) ||
(ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) ||
(ACPI_GET_OBJECT_TYPE(ddb_handle) != ACPI_TYPE_LOCAL_REFERENCE)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Get the actual table descriptor from the ddb_handle */
table_info = (struct acpi_table_desc *)table_desc->reference.object;
/*
* Delete the entire namespace under this table Node
* (Offset contains the table_id)
*/
acpi_ns_delete_namespace_by_owner(table_info->owner_id);
acpi_ut_release_owner_id(&table_info->owner_id);
/* Delete the table itself */
(void)acpi_tb_uninstall_table(table_info->installed_desc);
/* Delete the table descriptor (ddb_handle) */
acpi_ut_remove_reference(table_desc);
return_ACPI_STATUS(status);
}