leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
458f212e36
linux/arch/x86/kernel/head_64.S

524 lines
13 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
* Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
#include <linux/linkage.h>
#include <linux/threads.h>
[PATCH] x86_64: Unmap NULL during early bootup We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 16:25:53 +00:00
#include <linux/init.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/segment.h>
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
#include <asm/pgtable.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
x86: head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o patched md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-12 13:43:38 +00:00
#include <asm/processor-flags.h>
x86: make pda a percpu variable [ Based on original patch from Christoph Lameter and Mike Travis. ] As pda is now allocated in percpu area, it can easily be made a proper percpu variable. Make it so by defining per cpu symbol from linker script and declaring it in C code for SMP and simply defining it for UP. This change cleans up code and brings SMP and UP closer a bit. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 11:41:35 +00:00
#include <asm/percpu.h>
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
#include <asm/nops.h>
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86: turn priviled operation into a macro in head_64.S under paravirt, read cr2 cannot be issued directly anymore. So wrap it in a macro, defined to the operation itself in case paravirt is off, but to something else if we have paravirt in the game Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:31:10 +00:00
#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
#include <asm/paravirt.h>
x86, paravirt: Replace GET_CR2_INTO_RCX with GET_CR2_INTO_RAX GET_CR2_INTO_RCX is asinine: it is only used in one place, the actual paravirt call returns the value in %rax, not %rcx; and the one place that wants it wants the result in %r9. We actually generate as a result of this call: call ... movq %rax, %rcx xorq %rax, %rax /* this value isn't even used... */ movq %rcx, %r9 At least make the macro do what the paravirt call does, which is put the value into %rax. Nevermind the fact that the macro clobbers all the volatile registers. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-4-git-send-email-hpa@zytor.com Cc: Glauber de Oliveira Costa <glommer@parallels.com>
2012-04-19 00:16:48 +00:00
#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
x86: turn priviled operation into a macro in head_64.S under paravirt, read cr2 cannot be issued directly anymore. So wrap it in a macro, defined to the operation itself in case paravirt is off, but to something else if we have paravirt in the game Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:31:10 +00:00
#else
x86, paravirt: Replace GET_CR2_INTO_RCX with GET_CR2_INTO_RAX GET_CR2_INTO_RCX is asinine: it is only used in one place, the actual paravirt call returns the value in %rax, not %rcx; and the one place that wants it wants the result in %r9. We actually generate as a result of this call: call ... movq %rax, %rcx xorq %rax, %rax /* this value isn't even used... */ movq %rcx, %r9 At least make the macro do what the paravirt call does, which is put the value into %rax. Nevermind the fact that the macro clobbers all the volatile registers. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-4-git-send-email-hpa@zytor.com Cc: Glauber de Oliveira Costa <glommer@parallels.com>
2012-04-19 00:16:48 +00:00
#define GET_CR2_INTO(reg) movq %cr2, reg
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
#define INTERRUPT_RETURN iretq
x86: turn priviled operation into a macro in head_64.S under paravirt, read cr2 cannot be issued directly anymore. So wrap it in a macro, defined to the operation itself in case paravirt is off, but to something else if we have paravirt in the game Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:31:10 +00:00
#endif
tree-wide: Assorted spelling fixes In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 00:01:28 +00:00
/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
* because we need identity-mapped pages.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor Set __PAGE_OFFSET to the most negative possible address + 16*PGDIR_SIZE. The gap is to allow a space for a hypervisor to fit. The gap is more or less arbitrary, but it's what Xen needs. When booting native, kernel/head_64.S has a set of compile-time generated pagetables used at boot time. This patch removes their absolutely hard-coded layout, and makes it parameterised on __PAGE_OFFSET (and __START_KERNEL_map). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:16 +00:00
#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
L4_START_KERNEL = pgd_index(__START_KERNEL_map)
L3_START_KERNEL = pud_index(__START_KERNEL_map)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.text
x86: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". It also eliminates the ".text.head" output section (instead placing head code at the start of the .text output section), which should be harmless. This patch only changes the sections in the actual kernel, not those in the compressed boot loader. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-16 20:44:28 +00:00
__HEAD
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
.code64
.globl startup_64
startup_64:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
x86, doc: Fix incorrect comment about 64-bit code segment descriptors The AMD64 Architecture Programmer's Manual Volume 2, on page 89 mentions: "If the processor is running in 64-bit mode (L=1), the only valid setting of the D bit is 0." This matches with what the code does. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1361825650-14031-4-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-25 20:54:10 +00:00
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
* and someone has loaded an identity mapped page table
* for us. These identity mapped page tables map all of the
* kernel pages and possibly all of memory.
*
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
* %rsi holds a physical pointer to real_mode_data.
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
*
* We come here either directly from a 64bit bootloader, or from
* arch/x86_64/boot/compressed/head.S.
*
* We only come here initially at boot nothing else comes here.
*
* Since we may be loaded at an address different from what we were
* compiled to run at we first fixup the physical addresses in our page
* tables and then reload them.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
/*
* Compute the delta between the address I am compiled to run at and the
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
* address I am actually running at.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
leaq _text(%rip), %rbp
subq $_text - __START_KERNEL_map, %rbp
/* Is the address not 2M aligned? */
movq %rbp, %rax
x86: rename LARGE_PAGE_SIZE to PMD_PAGE_SIZE Fix up all users. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 15:48:08 +00:00
andl $~PMD_PAGE_MASK, %eax
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
testl %eax, %eax
jnz bad_address
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
/*
* Is the address too large?
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
leaq _text(%rip), %rax
shrq $MAX_PHYSMEM_BITS, %rax
jnz bad_address
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
/*
* Fixup the physical addresses in the page table
*/
addq %rbp, early_level4_pgt + (L4_START_KERNEL*8)(%rip)
x86: initial fixmap support Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: Eric W. Biderman <ebiderman@xmisson.com> Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:37:28 +00:00
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
addq %rbp, level3_kernel_pgt + (510*8)(%rip)
x86: initial fixmap support Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: Eric W. Biderman <ebiderman@xmisson.com> Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:37:28 +00:00
addq %rbp, level3_kernel_pgt + (511*8)(%rip)
addq %rbp, level2_fixmap_pgt + (506*8)(%rip)
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
/*
* Set up the identity mapping for the switchover. These
* entries should *NOT* have the global bit set! This also
* creates a bunch of nonsense entries but that is fine --
* it avoids problems around wraparound.
*/
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
leaq _text(%rip), %rdi
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
leaq early_level4_pgt(%rip), %rbx
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
movq %rdi, %rax
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
shrq $PGDIR_SHIFT, %rax
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
leaq (4096 + _KERNPG_TABLE)(%rbx), %rdx
movq %rdx, 0(%rbx,%rax,8)
movq %rdx, 8(%rbx,%rax,8)
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
addq $4096, %rdx
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
movq %rdi, %rax
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
shrq $PUD_SHIFT, %rax
andl $(PTRS_PER_PUD-1), %eax
movq %rdx, (4096+0)(%rbx,%rax,8)
movq %rdx, (4096+8)(%rbx,%rax,8)
addq $8192, %rbx
movq %rdi, %rax
shrq $PMD_SHIFT, %rdi
addq $(__PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL), %rax
leaq (_end - 1)(%rip), %rcx
shrq $PMD_SHIFT, %rcx
subq %rdi, %rcx
incl %ecx
1:
andq $(PTRS_PER_PMD - 1), %rdi
movq %rax, (%rbx,%rdi,8)
incq %rdi
addq $PMD_SIZE, %rax
decl %ecx
jnz 1b
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
x86: zap invalid and unused pmds in early boot The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting from __START_KERNEL_map. The kernel itself only needs _text to _end mapped in the high alias. On relocatible kernels the ASM setup code adjusts the compile time created high mappings to the relocation. This creates invalid pmd entries for negative offsets: 0xffffffff80000000 -> pmd entry: ffffffffff2001e3 It points outside of the physical address space and is marked present. This starts at the virtual address __START_KERNEL_map and goes up to the point where the first valid physical address (0x0) is mapped. Zap the mappings before _text and after _end right away in early boot. This removes also the invalid entries. Furthermore it simplifies the range check for high aliases. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-15 16:29:12 +00:00
/*
* Fixup the kernel text+data virtual addresses. Note that
* we might write invalid pmds, when the kernel is relocated
* cleanup_highmap() fixes this up along with the mappings
* beyond _end.
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
*/
leaq level2_kernel_pgt(%rip), %rdi
leaq 4096(%rdi), %r8
/* See if it is a valid page table entry */
1: testq $1, 0(%rdi)
jz 2f
addq %rbp, 0(%rdi)
/* Go to the next page */
2: addq $8, %rdi
cmp %r8, %rdi
jne 1b
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
movq $(early_level4_pgt - __START_KERNEL_map), %rax
jmp 1f
[PATCH] x86-64: 64bit PIC SMP trampoline This modifies the SMP trampoline and all of the associated code so it can jump to a 64bit kernel loaded at an arbitrary address. The dependencies on having an idenetity mapped page in the kernel page tables for SMP bootup have all been removed. In addition the trampoline has been modified to verify that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
ENTRY(secondary_startup_64)
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
/*
x86, doc: Fix incorrect comment about 64-bit code segment descriptors The AMD64 Architecture Programmer's Manual Volume 2, on page 89 mentions: "If the processor is running in 64-bit mode (L=1), the only valid setting of the D bit is 0." This matches with what the code does. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1361825650-14031-4-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-25 20:54:10 +00:00
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
* and someone has loaded a mapped page table.
*
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
* %rsi holds a physical pointer to real_mode_data.
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
*
* We come here either from startup_64 (using physical addresses)
* or from trampoline.S (using virtual addresses).
*
* Using virtual addresses from trampoline.S removes the need
* to have any identity mapped pages in the kernel page table
* after the boot processor executes this code.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
movq $(init_level4_pgt - __START_KERNEL_map), %rax
1:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Enable PAE mode and PGE */
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
movq %rcx, %cr4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Setup early boot stage 4 level pagetables. */
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
addq phys_base(%rip), %rax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rax, %cr3
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
/* Ensure I am executing from virtual addresses */
movq $1f, %rax
jmp *%rax
1:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Check if nx is implemented */
movl $0x80000001, %eax
cpuid
movl %edx,%edi
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
btsl $_EFER_SCE, %eax /* Enable System Call */
btl $20,%edi /* No Execute supported? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnc 1f
btsl $_EFER_NX, %eax
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
1: wrmsr /* Make changes effective */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Setup cr0 */
x86: head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o patched md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-12 13:43:38 +00:00
#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
X86_CR0_PG)
movl $CR0_STATE, %eax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Make changes effective */
movq %rax, %cr0
/* Setup a boot time stack */
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
movq stack_start(%rip), %rsp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* zero EFLAGS after setting rsp */
pushq $0
popfq
/*
* We must switch to a new descriptor in kernel space for the GDT
* because soon the kernel won't have access anymore to the userspace
* addresses where we're currently running on. We have to do that here
* because in 32bit we couldn't load a 64bit linear address.
*/
x86: move x86_64 gdt closer to i386 i386 and x86_64 used two different schemes for maintaining the gdt. With this patch, x86_64 initial gdt table is defined in a .c file, same way as i386 is now. Also, we call it "gdt_page", and the descriptor, "early_gdt_descr". This way we achieve common naming, which can allow for more code integration. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-28 23:19:53 +00:00
lgdt early_gdt_descr(%rip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86, 64-bit: Set data segments to null after switching to 64-bit mode This prevents kernel threads from inheriting non-null segment selectors, and causing optimizations in __switch_to() to be ineffective. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Tim Blechmann <tim@klingt.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jan Beulich <JBeulich@novell.com> LKML-Reference: <1259165856-3512-1-git-send-email-brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 16:17:36 +00:00
/* set up data segments */
xorl %eax,%eax
[PATCH] x86-64: x86_64 - Fix FS/GS registers for VT execution Initialize FS and GS to __KERNEL_DS as well. The actual value of them is not important, but it is important to reload them in protected mode. At this time, they still retain the real mode values from initial boot. VT disallows execution of code under such conditions, which means hardware virtualization can not be used to boot the kernel on Intel platforms, making the boot time painfully slow. This requires moving the GS load before the load of GS_BASE, so just move all the segments loads there to keep them together in the code. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 12:26:24 +00:00
movl %eax,%ds
movl %eax,%ss
movl %eax,%es
/*
* We don't really need to load %fs or %gs, but load them anyway
* to kill any stale realmode selectors. This allows execution
* under VT hardware.
*/
movl %eax,%fs
movl %eax,%gs
x86: load pointer to pda into %gs while brining up a CPU [ Based on original patch from Christoph Lameter and Mike Travis. ] CPU startup code in head_64.S loaded address of a zero page into %gs for temporary use till pda is loaded but address to the actual pda is available at the point. Load the real address directly instead. This will help unifying percpu and pda handling later on. This patch is mostly taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-13 11:41:35 +00:00
/* Set up %gs.
*
x86: move stack_canary into irq_stack Impact: x86_64 percpu area layout change, irq_stack now at the beginning Now that the PDA is empty except for the stack canary, it can be removed. The irqstack is moved to the start of the per-cpu section. If the stack protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack. tj: * updated subject * dropped asm relocation of irq_stack_ptr * updated comments a bit * rebased on top of stack canary changes Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 03:21:28 +00:00
* The base of %gs always points to the bottom of the irqstack
* union. If the stack protector canary is enabled, it is
* located at %gs:40. Note that, on SMP, the boot cpu uses
* init data section till per cpu areas are set up.
x86: load pointer to pda into %gs while brining up a CPU [ Based on original patch from Christoph Lameter and Mike Travis. ] CPU startup code in head_64.S loaded address of a zero page into %gs for temporary use till pda is loaded but address to the actual pda is available at the point. Load the real address directly instead. This will help unifying percpu and pda handling later on. This patch is mostly taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-13 11:41:35 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl $MSR_GS_BASE,%ecx
x86-64: Simplify loading initial_gs Load initial_gs as two 32-bit values instead of splitting a 64-bit value. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1279371808-24804-3-git-send-email-brgerst@gmail.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-07-17 13:03:28 +00:00
movl initial_gs(%rip),%eax
movl initial_gs+4(%rip),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wrmsr
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
/* rsi is pointer to real mode structure with interesting info.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pass it to C */
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
movq %rsi, %rdi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Finally jump to run C code and to be on real kernel address
* Since we are running on identity-mapped space we have to jump
[PATCH] Reload CS when startup_64 is used. In long mode the %cs is largely a relic. However there are a few cases like iret where it matters that we have a valid value. Without this patch it is possible to enter the kernel in startup_64 without setting %cs to a valid value. With this patch we don't care what %cs value we enter the kernel with, so long as the cs shadow register indicates it is a privileged code segment. Thanks to Magnus Damm for finding this problem and posting the first workable patch. I have moved the jump to set %cs down a few instructions so we don't need to take an extra jump. Which keeps the code simpler. Signed-of-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
* to the full 64bit address, this is only possible as indirect
* jump. In addition we need to ensure %cs is set so we make this
* a far return.
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
*
* Note: do not change to far jump indirect with 64bit offset.
*
* AMD does not support far jump indirect with 64bit offset.
* AMD64 Architecture Programmer's Manual, Volume 3: states only
* JMP FAR mem16:16 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
* JMP FAR mem16:32 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
*
* Intel64 does support 64bit offset.
* Software Developer Manual Vol 2: states:
* FF /5 JMP m16:16 Jump far, absolute indirect,
* address given in m16:16
* FF /5 JMP m16:32 Jump far, absolute indirect,
* address given in m16:32.
* REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
* address given in m16:64.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
movq initial_code(%rip),%rax
[PATCH] Reload CS when startup_64 is used. In long mode the %cs is largely a relic. However there are a few cases like iret where it matters that we have a valid value. Without this patch it is possible to enter the kernel in startup_64 without setting %cs to a valid value. With this patch we don't care what %cs value we enter the kernel with, so long as the cs shadow register indicates it is a privileged code segment. Thanks to Magnus Damm for finding this problem and posting the first workable patch. I have moved the jump to set %cs down a few instructions so we don't need to take an extra jump. Which keeps the code simpler. Signed-of-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
pushq $0 # fake return address to stop unwinder
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86-64, hotplug: Add start_cpu0() entry point to head_64.S start_cpu0() is defined in head_64.S for 64-bit. The function sets up stack and jumps to start_secondary() for CPU0 wake up. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1352835171-3958-8-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-13 19:32:44 +00:00
#ifdef CONFIG_HOTPLUG_CPU
/*
* Boot CPU0 entry point. It's called from play_dead(). Everything has been set
* up already except stack. We just set up stack here. Then call
* start_secondary().
*/
ENTRY(start_cpu0)
movq stack_start(%rip),%rsp
movq initial_code(%rip),%rax
pushq $0 # fake return address to stop unwinder
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
ENDPROC(start_cpu0)
#endif
[PATCH] x86_64: miscellaneous cleanup - adjust limits of GDT/IDT pseudo-descriptors (some were off by one) - move empty_zero_page into .bss.page_aligned - move cpu_gdt_table into .data.page_aligned - move idt_table into .bss - align inital_code and init_rsp - eliminate pointless (re-)declaration of idt_table in traps.c Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 15:30:01 +00:00
/* SMP bootup changes these two */
x86: fix section mismatch in head_64.S:initial_code initial_code are initially used to hold a function pointer from __init and later from __cpuinit. This confuses modpost and changing initial_code to REFDATA silence the warning. (But now we do not discard the variable anymore). Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-17 12:22:59 +00:00
__REFDATA
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
.balign 8
GLOBAL(initial_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.quad x86_64_start_kernel
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
GLOBAL(initial_gs)
x86: use linker to offset symbols by __per_cpu_load Impact: cleanup and bug fix Use the linker to create symbols for certain per-cpu variables that are offset by __per_cpu_load. This allows the removal of the runtime fixup of the GDT pointer, which fixes a bug with resume reported by Jiri Slaby. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-08 14:58:39 +00:00
.quad INIT_PER_CPU_VAR(irq_stack_union)
x86: fix 64-bit sections fix 64-bit section warnings. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 21:39:45 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
GLOBAL(stack_start)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.quad init_thread_union+THREAD_SIZE-8
x86: use stack_start in x86_64 call x86_64's init_rsp stack_start, just as i386 does. Put a zeroed stack segment for consistency. With this, we can eliminate one ugly ifdef in smpboot.c. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-28 01:22:54 +00:00
.word 0
x86-64: preserve large page mapping for 1st 2MB kernel txt with CONFIG_DEBUG_RODATA In the first 2MB, kernel text is co-located with kernel static page tables setup by head_64.S. CONFIG_DEBUG_RODATA chops this 2MB large page mapping to small 4KB pages as we mark the kernel text as RO, leaving the static page tables as RW. With CONFIG_DEBUG_RODATA disabled, OLTP run on NHM-EP shows 1% improvement with 2% reduction in system time and 1% improvement in iowait idle time. To recover this, move the kernel static page tables to .data section, so that we don't have to break the first 2MB of kernel text to small pages with CONFIG_DEBUG_RODATA. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091014220254.063193621@sbs-t61.sc.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-14 21:46:55 +00:00
__FINITDATA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
bad_address:
jmp bad_address
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
__INIT
x86: early_idt_handler improvements, 64-bit It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
.globl early_idt_handlers
early_idt_handlers:
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
# 104(%rsp) %rflags
# 96(%rsp) %cs
# 88(%rsp) %rip
# 80(%rsp) error code
x86: replace early exception setup macro recursion with loop The early exception handlers are currently set up using a macro recursion. There is only one user left. Replace the macro with a standard loop in place. Noop patch, just a cleanup. [ tglx@linutronix.de: simplified ] Signed-off-by: Andi Kleen <ak@suse.de> Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-11 01:23:22 +00:00
i = 0
.rept NUM_EXCEPTION_VECTORS
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
.if (EXCEPTION_ERRCODE_MASK >> i) & 1
ASM_NOP2
.else
pushq $0 # Dummy error code, to make stack frame uniform
.endif
pushq $i # 72(%rsp) Vector number
x86: replace early exception setup macro recursion with loop The early exception handlers are currently set up using a macro recursion. There is only one user left. Replace the macro with a standard loop in place. Noop patch, just a cleanup. [ tglx@linutronix.de: simplified ] Signed-off-by: Andi Kleen <ak@suse.de> Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-11 01:23:22 +00:00
jmp early_idt_handler
i = i + 1
.endr
x86: early_idt_handler improvements, 64-bit It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
x86-64: don't set the early IDT to point directly to 'early_idt_handler' The code requires the use of the proper per-exception-vector stub functions (set up as the early_idt_handlers[] array - note the 's') that make sure to set up the error vector number. This is true regardless of whether CONFIG_EARLY_PRINTK is set or not. Why? The stack offset for the comparison of __KERNEL_CS won't be right otherwise, nor will the new check (from commit 8170e6bed465: "x86, 64bit: Use a #PF handler to materialize early mappings on demand") for the page fault exception vector. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 21:09:51 +00:00
/* This is global to keep gas from relaxing the jumps */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ENTRY(early_idt_handler)
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
cld
[PATCH] x86_64: Dump stack and prevent recursion on early fault Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:25:00 +00:00
cmpl $2,early_recursion_flag(%rip)
jz 1f
incl early_recursion_flag(%rip)
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
pushq %rax # 64(%rsp)
pushq %rcx # 56(%rsp)
pushq %rdx # 48(%rsp)
pushq %rsi # 40(%rsp)
pushq %rdi # 32(%rsp)
pushq %r8 # 24(%rsp)
pushq %r9 # 16(%rsp)
pushq %r10 # 8(%rsp)
pushq %r11 # 0(%rsp)
cmpl $__KERNEL_CS,96(%rsp)
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
jne 11f
cmpl $14,72(%rsp) # Page fault?
jnz 10f
GET_CR2_INTO(%rdi) # can clobber any volatile register if pv
call early_make_pgtable
andl %eax,%eax
jz 20f # All good
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
10:
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
leaq 88(%rsp),%rdi # Pointer to %rip
call early_fixup_exception
andl %eax,%eax
jnz 20f # Found an exception entry
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
11:
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
#ifdef CONFIG_EARLY_PRINTK
GET_CR2_INTO(%r9) # can clobber any volatile register if pv
movl 80(%rsp),%r8d # error code
movl 72(%rsp),%esi # vector number
movl 96(%rsp),%edx # %cs
movq 88(%rsp),%rcx # %rip
x86: early_idt_handler improvements, 64-bit It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
xorl %eax,%eax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
leaq early_idt_msg(%rip),%rdi
call early_printk
[PATCH] x86_64: Dump stack and prevent recursion on early fault Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:25:00 +00:00
cmpl $2,early_recursion_flag(%rip)
jz 1f
call dump_stack
[PATCH] x86_64: Resolve the RIP of an early exception using kallsyms But do it after everything else to risk less from recursive crashes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16 22:42:10 +00:00
#ifdef CONFIG_KALLSYMS
leaq early_idt_ripmsg(%rip),%rdi
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
movq 40(%rsp),%rsi # %rip again
[PATCH] x86_64: Resolve the RIP of an early exception using kallsyms But do it after everything else to risk less from recursive crashes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16 22:42:10 +00:00
call __print_symbol
#endif
x86: make early printk selectable on 64-bit as well Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
#endif /* EARLY_PRINTK */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
1: hlt
jmp 1b
x86: make early printk selectable on 64-bit as well Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
20: # Exception table entry found or page table generated
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
popq %r11
popq %r10
popq %r9
popq %r8
popq %rdi
popq %rsi
popq %rdx
popq %rcx
popq %rax
addq $16,%rsp # drop vector number and error code
decl early_recursion_flag(%rip)
INTERRUPT_RETURN
x86-64: don't set the early IDT to point directly to 'early_idt_handler' The code requires the use of the proper per-exception-vector stub functions (set up as the early_idt_handlers[] array - note the 's') that make sure to set up the error vector number. This is true regardless of whether CONFIG_EARLY_PRINTK is set or not. Why? The stack offset for the comparison of __KERNEL_CS won't be right otherwise, nor will the new check (from commit 8170e6bed465: "x86, 64bit: Use a #PF handler to materialize early mappings on demand") for the page fault exception vector. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 21:09:51 +00:00
ENDPROC(early_idt_handler)
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
__INITDATA
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
.balign 4
[PATCH] x86_64: Dump stack and prevent recursion on early fault Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:25:00 +00:00
early_recursion_flag:
.long 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86-64: Handle exception table entries during early boot If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 00:16:49 +00:00
#ifdef CONFIG_EARLY_PRINTK
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
early_idt_msg:
x86: early_idt_handler improvements, 64-bit It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
.asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
[PATCH] x86_64: Resolve the RIP of an early exception using kallsyms But do it after everything else to risk less from recursive crashes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16 22:42:10 +00:00
early_idt_ripmsg:
.asciz "RIP %s\n"
x86: make early printk selectable on 64-bit as well Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:06 +00:00
#endif /* CONFIG_EARLY_PRINTK */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
#define NEXT_PAGE(name) \
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
.balign PAGE_SIZE; \
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
GLOBAL(name)
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
/* Automate the creation of 1 to 1 mapping pmd entries */
x86: head_64.S cleanup - use PMD_SHIFT instead of numeric constant Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-13 16:55:40 +00:00
#define PMDS(START, PERM, COUNT) \
i = 0 ; \
.rept (COUNT) ; \
.quad (START) + (i << PMD_SHIFT) + (PERM) ; \
i = i + 1 ; \
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
.endr
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
__INITDATA
NEXT_PAGE(early_level4_pgt)
.fill 511,8,0
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(early_dynamic_pgts)
.fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0
x86-64: preserve large page mapping for 1st 2MB kernel txt with CONFIG_DEBUG_RODATA In the first 2MB, kernel text is co-located with kernel static page tables setup by head_64.S. CONFIG_DEBUG_RODATA chops this 2MB large page mapping to small 4KB pages as we mark the kernel text as RO, leaving the static page tables as RW. With CONFIG_DEBUG_RODATA disabled, OLTP run on NHM-EP shows 1% improvement with 2% reduction in system time and 1% improvement in iowait idle time. To recover this, move the kernel static page tables to .data section, so that we don't have to break the first 2MB of kernel text to small pages with CONFIG_DEBUG_RODATA. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091014220254.063193621@sbs-t61.sc.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-14 21:46:55 +00:00
.data
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
#ifndef CONFIG_XEN
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
NEXT_PAGE(init_level4_pgt)
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
.fill 512,8,0
#else
NEXT_PAGE(init_level4_pgt)
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.org init_level4_pgt + L4_PAGE_OFFSET*8, 0
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.org init_level4_pgt + L4_START_KERNEL*8, 0
[PATCH] x86-64: Remove the identity mapping as early as possible With the rewrite of the SMP trampoline and the early page allocator there is nothing that needs identity mapped pages, once we start executing C code. So add zap_identity_mappings into head64.c and remove zap_low_mappings() from much later in the code. The functions are subtly different thus the name change. This also kills boot_level4_pgt which was from an earlier attempt to move the identity mappings as early as possible, and is now no longer needed. Essentially I have replaced boot_level4_pgt with trampoline_level4_pgt in trampoline.S Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
NEXT_PAGE(level3_ident_pgt)
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
.quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
.fill 511, 8, 0
NEXT_PAGE(level2_ident_pgt)
/* Since I easily can, map the first 1G.
* Don't set NX because code runs from these pages.
*/
PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
NEXT_PAGE(level3_kernel_pgt)
paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor Set __PAGE_OFFSET to the most negative possible address + 16*PGDIR_SIZE. The gap is to allow a space for a hypervisor to fit. The gap is more or less arbitrary, but it's what Xen needs. When booting native, kernel/head_64.S has a set of compile-time generated pagetables used at boot time. This patch removes their absolutely hard-coded layout, and makes it parameterised on __PAGE_OFFSET (and __START_KERNEL_map). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:16 +00:00
.fill L3_START_KERNEL,8,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
.quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
x86: initial fixmap support Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: Eric W. Biderman <ebiderman@xmisson.com> Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:37:28 +00:00
.quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
NEXT_PAGE(level2_kernel_pgt)
x86: fix spontaneous reboot with allyesconfig bzImage recently the 64-bit allyesconfig bzImage kernel started spontaneously rebooting during early bootup. after a few fun hours spent with early init debugging, it turns out that we've got this rather annoying limit on the size of the kernel image: #define KERNEL_TEXT_SIZE (40*1024*1024) which limit my vmlinux just happened to pass: text data bss dec hex filename 29703744 4222751 8646224 42572719 2899baf vmlinux 40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/ So it happily crashed right in head_64.S, which - as we all know - is the most debuggable code in the whole architecture ;-) So increase the limit to allow an up to 128MB kernel image to be mapped. (should anyone be that crazy or lazy) We have a full 4K of pagetable (level2_kernel_pgt) allocated for these mappings already, so there's no RAM overhead and the limit was rather pointless and arbitrary. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 10:04:11 +00:00
/*
x86: increase the kernel text limit to 512 MB people sometimes do crazy stuff like building really large static arrays into their kernels or building allyesconfig kernels. Give more space to the kernel and push modules up a bit: kernel has 512 MB and modules have 1.5 GB. Should be enough for a few years ;-) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 11:50:51 +00:00
* 512 MB kernel mapping. We spend a full page on this pagetable
x86: fix spontaneous reboot with allyesconfig bzImage recently the 64-bit allyesconfig bzImage kernel started spontaneously rebooting during early bootup. after a few fun hours spent with early init debugging, it turns out that we've got this rather annoying limit on the size of the kernel image: #define KERNEL_TEXT_SIZE (40*1024*1024) which limit my vmlinux just happened to pass: text data bss dec hex filename 29703744 4222751 8646224 42572719 2899baf vmlinux 40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/ So it happily crashed right in head_64.S, which - as we all know - is the most debuggable code in the whole architecture ;-) So increase the limit to allow an up to 128MB kernel image to be mapped. (should anyone be that crazy or lazy) We have a full 4K of pagetable (level2_kernel_pgt) allocated for these mappings already, so there's no RAM overhead and the limit was rather pointless and arbitrary. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 10:04:11 +00:00
* anyway.
*
* The kernel code+data+bss must not be bigger than that.
*
x86: increase the kernel text limit to 512 MB people sometimes do crazy stuff like building really large static arrays into their kernels or building allyesconfig kernels. Give more space to the kernel and push modules up a bit: kernel has 512 MB and modules have 1.5 GB. Should be enough for a few years ;-) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 11:50:51 +00:00
* (NOTE: at +512MB starts the module area, see MODULES_VADDR.
x86: fix spontaneous reboot with allyesconfig bzImage recently the 64-bit allyesconfig bzImage kernel started spontaneously rebooting during early bootup. after a few fun hours spent with early init debugging, it turns out that we've got this rather annoying limit on the size of the kernel image: #define KERNEL_TEXT_SIZE (40*1024*1024) which limit my vmlinux just happened to pass: text data bss dec hex filename 29703744 4222751 8646224 42572719 2899baf vmlinux 40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/ So it happily crashed right in head_64.S, which - as we all know - is the most debuggable code in the whole architecture ;-) So increase the limit to allow an up to 128MB kernel image to be mapped. (should anyone be that crazy or lazy) We have a full 4K of pagetable (level2_kernel_pgt) allocated for these mappings already, so there's no RAM overhead and the limit was rather pointless and arbitrary. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 10:04:11 +00:00
* If you want to increase this then increase MODULES_VADDR
* too.)
*/
x86: always set _PAGE_GLOBAL in _PAGE_KERNEL* flags Consistently set _PAGE_GLOBAL in _PAGE_KERNEL flags. This makes 32- and 64-bit code consistent, and removes some special cases where __PAGE_KERNEL* did not have _PAGE_GLOBAL set, causing confusion as a result of the inconsistencies. This patch only affects x86-64, which generally always supports PGD. The x86-32 patch is next. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-01 23:46:35 +00:00
PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZE The KERNEL_TEXT_SIZE constant was mis-named, as we not only map the kernel text but data, bss and init sections as well. That name led me on the wrong path with the KERNEL_TEXT_SIZE regression, because i knew how big of _text_ my images have and i knew about the 40 MB "text" limit so i wrongly thought to be on the safe side of the 40 MB limit with my 29 MB of text, while the total image size was slightly above 40 MB. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-21 12:39:30 +00:00
KERNEL_IMAGE_SIZE/PMD_SIZE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
NEXT_PAGE(level2_fixmap_pgt)
.fill 506,8,0
.quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
/* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
.fill 5,8,0
NEXT_PAGE(level1_fixmap_pgt)
.fill 512,8,0
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
[PATCH] x86-64: Clean up the early boot page table - Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:06 +00:00
#undef PMDS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table} ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-17 06:03:32 +00:00
.data
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.align 16
x86: move x86_64 gdt closer to i386 i386 and x86_64 used two different schemes for maintaining the gdt. With this patch, x86_64 initial gdt table is defined in a .c file, same way as i386 is now. Also, we call it "gdt_page", and the descriptor, "early_gdt_descr". This way we achieve common naming, which can allow for more code integration. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-28 23:19:53 +00:00
.globl early_gdt_descr
early_gdt_descr:
.word GDT_ENTRIES*8-1
x86: make percpu symbols zerobased on SMP [ Based on original patch from Christoph Lameter and Mike Travis. ] This patch makes percpu symbols zerobased on x86_64 SMP by adding PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on the percpu output section and using it in vmlinux_64.lds.S. A new PHDR is added as existing ones cannot contain sections near address zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which always points to the vaddr of the loaded percpu data.init region. The following adjustments have been made to accomodate the address change. * code to locate percpu gdt_page in head_64.S is updated to add the load address to the gdt_page offset. * __per_cpu_load is used in places where access to the init data area is necessary. * pda->data_offset is initialized soon after C code is entered as zero value doesn't work anymore. This patch is mostly taken from Mike Travis' "x86_64: Base percpu variables at zero" patch. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 11:41:35 +00:00
early_gdt_descr_base:
x86: use linker to offset symbols by __per_cpu_load Impact: cleanup and bug fix Use the linker to create symbols for certain per-cpu variables that are offset by __per_cpu_load. This allows the removal of the runtime fixup of the GDT pointer, which fixes a bug with resume reported by Jiri Slaby. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-08 14:58:39 +00:00
.quad INIT_PER_CPU_VAR(gdt_page)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86-64: Relocatable Kernel Support This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 17:27:07 +00:00
ENTRY(phys_base)
/* This must match the first entry in level2_kernel_pgt */
.quad 0x0000000000000000
xen64: add xen-head code to head_64.S Add the Xen entrypoint and ELF notes to head_64.S. Adapts xen-head.S to compile either 32-bit or 64-bit. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:44 +00:00
#include "../../x86/xen/xen-head.S"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: miscellaneous cleanup - adjust limits of GDT/IDT pseudo-descriptors (some were off by one) - move empty_zero_page into .bss.page_aligned - move cpu_gdt_table into .data.page_aligned - move idt_table into .bss - align inital_code and init_rsp - eliminate pointless (re-)declaration of idt_table in traps.c Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 15:30:01 +00:00
.section .bss, "aw", @nobits
.align L1_CACHE_BYTES
ENTRY(idt_table)
x86: head_64.S - use IDT_ENTRIES instead of hardcoded number Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:56:58 +00:00
.skip IDT_ENTRIES * 16
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: Keep current stack in NMI breakpoints We want to allow NMI handlers to have breakpoints to be able to remove stop_machine from ftrace, kprobes and jump_labels. But if an NMI interrupts a current breakpoint, and then it triggers a breakpoint itself, it will switch to the breakpoint stack and corrupt the data on it for the breakpoint processing that it interrupted. Instead, have the NMI check if it interrupted breakpoint processing by checking if the stack that is currently used is a breakpoint stack. If it is, then load a special IDT that changes the IST for the debug exception to keep the same stack in kernel context. When the NMI is done, it puts it back. This way, if the NMI does trigger a breakpoint, it will keep using the same stack and not stomp on the breakpoint data for the breakpoint it interrupted. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-09 08:02:19 +00:00
.align L1_CACHE_BYTES
ENTRY(nmi_idt_table)
.skip IDT_ENTRIES * 16
Use macros for .bss.page_aligned section. This patch changes the remaining direct references to .bss.page_aligned in C and assembly code to use the macros in include/linux/linkage.h. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 22:14:14 +00:00
__PAGE_ALIGNED_BSS
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
NEXT_PAGE(empty_zero_page)
[PATCH] x86_64: miscellaneous cleanup - adjust limits of GDT/IDT pseudo-descriptors (some were off by one) - move empty_zero_page into .bss.page_aligned - move cpu_gdt_table into .data.page_aligned - move idt_table into .bss - align inital_code and init_rsp - eliminate pointless (re-)declaration of idt_table in traps.c Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 15:30:01 +00:00
.skip PAGE_SIZE
Reference in New Issue Copy Permalink