leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
457cfabb99
linux/drivers/net/ethernet/i825xx/82596.c

1549 lines
39 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* 82596.c: A generic 82596 ethernet driver for linux. */
/*
Based on Apricot.c
Written 1994 by Mark Evans.
This driver is for the Apricot 82596 bus-master interface
Modularised 12/94 Mark Evans
Modified to support the 82596 ethernet chips on 680x0 VME boards.
by Richard Hirst <richard@sleepie.demon.co.uk>
Renamed to be 82596.c
980825: Changed to receive directly in to sk_buffs which are
allocated at open() time. Eliminates copy on incoming frames
(small ones are still copied). Shared data now held in a
non-cached page, so we can run on 68060 in copyback mode.
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
tree-wide: fix assorted typos all over the place That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-14 15:09:05 +00:00
* performance test to tune rx_copybreak
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
'big-endian' mode, it thinks a 32 bit value of 0x12345678
should be stored as 0x56781234. This is a real pain, when
you have linked lists which are shared by the 680x0 and the
i596.
Driver skeleton
Written 1993 by Donald Becker.
Copyright 1993 United States Government as represented by the Director,
National Security Agency. This software may only be used and distributed
according to the terms of the GNU General Public License as modified by SRC,
incorporated herein by reference.
The author may be reached as becker@scyld.com, or C/O
Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/bitops.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/pgtable.h>
netdev: i82596 Ethernet needs <asm/cacheflush.h> netdev: i82596 Ethernet needs <asm/cacheflush.h> on m68k drivers/net/82596.c: In function 'init_rx_bufs': drivers/net/82596.c:552: error: implicit declaration of function 'cache_clear' drivers/net/82596.c: In function 'i596_start_xmit': drivers/net/82596.c:1104: error: implicit declaration of function 'cache_push' The driver still compiles on ia32 (CONFIG_APRICOT=y) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-20 16:40:45 +00:00
#include <asm/cacheflush.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static char version[] __initdata =
"82596.c $Revision: 1.5 $\n";
#define DRV_NAME "82596"
/* DEBUG flags
*/
#define DEB_INIT 0x0001
#define DEB_PROBE 0x0002
#define DEB_SERIOUS 0x0004
#define DEB_ERRORS 0x0008
#define DEB_MULTI 0x0010
#define DEB_TDR 0x0020
#define DEB_OPEN 0x0040
#define DEB_RESET 0x0080
#define DEB_ADDCMD 0x0100
#define DEB_STATUS 0x0200
#define DEB_STARTTX 0x0400
#define DEB_RXADDR 0x0800
#define DEB_TXADDR 0x1000
#define DEB_RXFRAME 0x2000
#define DEB_INTS 0x4000
#define DEB_STRUCT 0x8000
#define DEB_ANY 0xffff
#define DEB(x,y) if (i596_debug & (x)) y
#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE)
#define ENABLE_MVME16x_NET
#endif
#if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE)
#define ENABLE_BVME6000_NET
#endif
#ifdef ENABLE_MVME16x_NET
#include <asm/mvme16xhw.h>
#endif
#ifdef ENABLE_BVME6000_NET
#include <asm/bvme6000hw.h>
#endif
/*
* Define various macros for Channel Attention, word swapping etc., dependent
* on architecture. MVME and BVME are 680x0 based, otherwise it is Intel.
*/
#ifdef __mc68000__
#define WSWAPrfd(x) ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPrbd(x) ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPscb(x) ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPcmd(x) ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPtbd(x) ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define WSWAPchar(x) ((char *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
#define ISCP_BUSY 0x00010000
#else
drivers/net: delete 486 Apricot support The Apricot was a 486 PC with 4MB RAM, and an on-board ethernet via an intel i82596 hard-wired to i/o 0x300. Those who were using linux in the 1990's will recall that the i82596 driver was not one of the more stable or widely used drivers of its day. Combine that with the extremely limited resources of the platform, and it is truly time to expire the support for this thing. There are some old m68k targets who were also using this chip, so rather than poll the m68k user base, we simply cut out the x86/Apricot support here in this commit. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-01-09 03:00:39 +00:00
#error 82596.c: unknown architecture
#endif
/*
* These were the intel versions, left here for reference. There
* are currently no x86 users of this legacy i82596 chip.
*/
#if 0
drivers/net/82596.c: suppress warnings i386 allmodconfig: drivers/net/82596.c: In function 'init_rx_bufs': drivers/net/82596.c:544: warning: cast to pointer from integer of different size drivers/net/82596.c:545: warning: cast to pointer from integer of different size drivers/net/82596.c:548: warning: cast to pointer from integer of different size drivers/net/82596.c:557: warning: cast to pointer from integer of different size drivers/net/82596.c:565: warning: cast to pointer from integer of different size drivers/net/82596.c:569: warning: cast to pointer from integer of different size drivers/net/82596.c:575: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'rebuild_rx_bufs': drivers/net/82596.c:606: warning: cast to pointer from integer of different size drivers/net/82596.c:608: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'init_i596_mem': drivers/net/82596.c:680: warning: cast to pointer from integer of different size drivers/net/82596.c:681: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_rx': drivers/net/82596.c:818: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_add_cmd': drivers/net/82596.c:975: warning: cast to pointer from integer of different size drivers/net/82596.c:979: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_start_xmit': drivers/net/82596.c:1088: warning: cast to pointer from integer of different size drivers/net/82596.c:1099: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_interrupt': drivers/net/82596.c:1404: warning: cast to pointer from integer of different size (ugh) Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-12 10:48:37 +00:00
#define WSWAPrfd(x) ((struct i596_rfd *)((long)x))
#define WSWAPrbd(x) ((struct i596_rbd *)((long)x))
#define WSWAPiscp(x) ((struct i596_iscp *)((long)x))
#define WSWAPscb(x) ((struct i596_scb *)((long)x))
#define WSWAPcmd(x) ((struct i596_cmd *)((long)x))
#define WSWAPtbd(x) ((struct i596_tbd *)((long)x))
#define WSWAPchar(x) ((char *)((long)x))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define ISCP_BUSY 0x0001
#endif
/*
* The MPU_PORT command allows direct access to the 82596. With PORT access
* the following commands are available (p5-18). The 32-bit port command
* must be word-swapped with the most significant word written first.
* This only applies to VME boards.
*/
#define PORT_RESET 0x00 /* reset 82596 */
#define PORT_SELFTEST 0x01 /* selftest */
#define PORT_ALTSCP 0x02 /* alternate SCB address */
#define PORT_ALTDUMP 0x03 /* Alternate DUMP address */
static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
MODULE_AUTHOR("Richard Hirst");
MODULE_DESCRIPTION("i82596 driver");
MODULE_LICENSE("GPL");
module_param(i596_debug, int, 0);
MODULE_PARM_DESC(i596_debug, "i82596 debug mask");
/* Copy frames shorter than rx_copybreak, otherwise pass on up in
* a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha).
*/
static int rx_copybreak = 100;
#define PKT_BUF_SZ 1536
#define MAX_MC_CNT 64
#define I596_TOTAL_SIZE 17
#define I596_NULL ((void *)0xffffffff)
#define CMD_EOL 0x8000 /* The last command of the list, stop. */
#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */
#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */
#define CMD_FLEX 0x0008 /* Enable flexible memory model */
enum commands {
CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
};
#define STAT_C 0x8000 /* Set to 0 after execution */
#define STAT_B 0x4000 /* Command being executed */
#define STAT_OK 0x2000 /* Command executed ok */
#define STAT_A 0x1000 /* Command aborted */
#define CUC_START 0x0100
#define CUC_RESUME 0x0200
#define CUC_SUSPEND 0x0300
#define CUC_ABORT 0x0400
#define RX_START 0x0010
#define RX_RESUME 0x0020
#define RX_SUSPEND 0x0030
#define RX_ABORT 0x0040
drivers/net: normalize TX_TIMEOUT Some network drivers use old TX_TIMEOUT definitions, assuming HZ=100 of old kernels. Convert these definitions to include HZ, since HZ can be 1000 these days. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 22:49:35 +00:00
#define TX_TIMEOUT (HZ/20)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct i596_reg {
unsigned short porthi;
unsigned short portlo;
unsigned long ca;
};
#define EOF 0x8000
#define SIZE_MASK 0x3fff
struct i596_tbd {
unsigned short size;
unsigned short pad;
struct i596_tbd *next;
char *data;
};
/* The command structure has two 'next' pointers; v_next is the address of
* the next command as seen by the CPU, b_next is the address of the next
* command as seen by the 82596. The b_next pointer, as used by the 82596
* always references the status field of the next command, rather than the
* v_next field, because the 82596 is unaware of v_next. It may seem more
* logical to put v_next at the end of the structure, but we cannot do that
* because the 82596 expects other fields to be there, depending on command
* type.
*/
struct i596_cmd {
struct i596_cmd *v_next; /* Address from CPUs viewpoint */
unsigned short status;
unsigned short command;
struct i596_cmd *b_next; /* Address from i596 viewpoint */
};
struct tx_cmd {
struct i596_cmd cmd;
struct i596_tbd *tbd;
unsigned short size;
unsigned short pad;
struct sk_buff *skb; /* So we can free it after tx */
};
struct tdr_cmd {
struct i596_cmd cmd;
unsigned short status;
unsigned short pad;
};
struct mc_cmd {
struct i596_cmd cmd;
short mc_cnt;
char mc_addrs[MAX_MC_CNT*6];
};
struct sa_cmd {
struct i596_cmd cmd;
char eth_addr[8];
};
struct cf_cmd {
struct i596_cmd cmd;
char i596_config[16];
};
struct i596_rfd {
unsigned short stat;
unsigned short cmd;
struct i596_rfd *b_next; /* Address from i596 viewpoint */
struct i596_rbd *rbd;
unsigned short count;
unsigned short size;
struct i596_rfd *v_next; /* Address from CPUs viewpoint */
struct i596_rfd *v_prev;
};
struct i596_rbd {
unsigned short count;
unsigned short zero1;
struct i596_rbd *b_next;
unsigned char *b_data; /* Address from i596 viewpoint */
unsigned short size;
unsigned short zero2;
struct sk_buff *skb;
struct i596_rbd *v_next;
struct i596_rbd *b_addr; /* This rbd addr from i596 view */
unsigned char *v_data; /* Address from CPUs viewpoint */
};
#define TX_RING_SIZE 64
#define RX_RING_SIZE 16
struct i596_scb {
unsigned short status;
unsigned short command;
struct i596_cmd *cmd;
struct i596_rfd *rfd;
unsigned long crc_err;
unsigned long align_err;
unsigned long resource_err;
unsigned long over_err;
unsigned long rcvdt_err;
unsigned long short_err;
unsigned short t_on;
unsigned short t_off;
};
struct i596_iscp {
unsigned long stat;
struct i596_scb *scb;
};
struct i596_scp {
unsigned long sysbus;
unsigned long pad;
struct i596_iscp *iscp;
};
struct i596_private {
volatile struct i596_scp scp;
volatile struct i596_iscp iscp;
volatile struct i596_scb scb;
struct sa_cmd sa_cmd;
struct cf_cmd cf_cmd;
struct tdr_cmd tdr_cmd;
struct mc_cmd mc_cmd;
unsigned long stat;
int last_restart __attribute__((aligned(4)));
struct i596_rfd *rfd_head;
struct i596_rbd *rbd_head;
struct i596_cmd *cmd_tail;
struct i596_cmd *cmd_head;
int cmd_backlog;
unsigned long last_cmd;
struct i596_rfd rfds[RX_RING_SIZE];
struct i596_rbd rbds[RX_RING_SIZE];
struct tx_cmd tx_cmds[TX_RING_SIZE];
struct i596_tbd tbds[TX_RING_SIZE];
int next_tx_cmd;
spinlock_t lock;
};
static char init_setup[] =
{
0x8E, /* length, prefetch on */
0xC8, /* fifo to 8, monitor off */
#ifdef CONFIG_VME
0xc0, /* don't save bad frames */
#else
0x80, /* don't save bad frames */
#endif
0x2E, /* No source address insertion, 8 byte preamble */
0x00, /* priority and backoff defaults */
0x60, /* interframe spacing */
0x00, /* slot time LSB */
0xf2, /* slot time and retries */
0x00, /* promiscuous mode */
0x00, /* collision detect */
0x40, /* minimum frame length */
0xff,
0x00,
0x7f /* *multi IA */ };
static int i596_open(struct net_device *dev);
netdev: convert bulk of drivers to netdev_tx_t In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:50:58 +00:00
static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t i596_interrupt(int irq, void *dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int i596_close(struct net_device *dev);
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
static void i596_tx_timeout (struct net_device *dev);
static void print_eth(unsigned char *buf, char *str);
static void set_multicast_list(struct net_device *dev);
static int rx_ring_size = RX_RING_SIZE;
static int ticks_limit = 25;
static int max_cmd_backlog = TX_RING_SIZE-1;
static inline void CA(struct net_device *dev)
{
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
((struct i596_reg *) dev->base_addr)->ca = 1;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile u32 i;
i = *(volatile u32 *) (dev->base_addr);
}
#endif
}
static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x)
{
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
struct i596_reg *p = (struct i596_reg *) (dev->base_addr);
p->porthi = ((c) | (u32) (x)) & 0xffff;
p->portlo = ((c) | (u32) (x)) >> 16;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
u32 v = (u32) (c) | (u32) (x);
v = ((u32) (v) << 16) | ((u32) (v) >> 16);
*(volatile u32 *) dev->base_addr = v;
udelay(1);
*(volatile u32 *) dev->base_addr = v;
}
#endif
}
static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
{
while (--delcnt && lp->iscp.stat)
udelay(10);
if (!delcnt) {
printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
dev->name, str, lp->scb.status, lp->scb.command);
return -1;
}
else
return 0;
}
static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
{
while (--delcnt && lp->scb.command)
udelay(10);
if (!delcnt) {
printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
dev->name, str, lp->scb.status, lp->scb.command);
return -1;
}
else
return 0;
}
static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str)
{
volatile struct i596_cmd *c = cmd;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 17:24:59 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
while (--delcnt && c->command)
udelay(10);
if (!delcnt) {
printk(KERN_ERR "%s: %s.\n", dev->name, str);
return -1;
}
else
return 0;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 17:24:59 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void i596_display_data(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct i596_cmd *cmd;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n",
&lp->scp, lp->scp.sysbus, lp->scp.iscp);
printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n",
&lp->iscp, lp->iscp.stat, lp->iscp.scb);
printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x,"
" .cmd = %p, .rfd = %p\n",
&lp->scb, lp->scb.status, lp->scb.command,
lp->scb.cmd, lp->scb.rfd);
printk(KERN_ERR " errors: crc %lx, align %lx, resource %lx,"
" over %lx, rcvdt %lx, short %lx\n",
lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
cmd = lp->cmd_head;
while (cmd != I596_NULL) {
printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n",
cmd, cmd->status, cmd->command, cmd->b_next);
cmd = cmd->v_next;
}
rfd = lp->rfd_head;
printk(KERN_ERR "rfd_head = %p\n", rfd);
do {
printk(KERN_ERR " %p .stat %04x, .cmd %04x, b_next %p, rbd %p,"
" count %04x\n",
rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
rfd->count);
rfd = rfd->v_next;
} while (rfd != lp->rfd_head);
rbd = lp->rbd_head;
printk(KERN_ERR "rbd_head = %p\n", rbd);
do {
printk(KERN_ERR " %p .count %04x, b_next %p, b_data %p, size %04x\n",
rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
rbd = rbd->v_next;
} while (rbd != lp->rbd_head);
}
#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t i596_error(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = dev_id;
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
pcc2[0x28] = 1;
pcc2[0x2b] = 0x1d;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
*ethirq = 1;
*ethirq = 3;
}
#endif
printk(KERN_ERR "%s: Error interrupt\n", dev->name);
i596_display_data(dev);
return IRQ_HANDLED;
}
#endif
82596: do not panic on out of memory If dev_alloc_skb() failed then free already allocated skbs. remove_rx_bufs() can be called multiple times, so set rbd->skb to NULL to avoid double free. remove_rx_bufs() was moved upwards to be seen by init_rx_bufs(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:22 +00:00
static inline void remove_rx_bufs(struct net_device *dev)
{
struct i596_private *lp = dev->ml_priv;
struct i596_rbd *rbd;
int i;
for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
if (rbd->skb == NULL)
break;
dev_kfree_skb(rbd->skb);
rbd->skb = NULL;
}
}
static inline int init_rx_bufs(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int i;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
/* First build the Receive Buffer Descriptor List */
for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
netdev: ethernet dev_alloc_skb to netdev_alloc_skb Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05 02:50:38 +00:00
struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
82596: do not panic on out of memory If dev_alloc_skb() failed then free already allocated skbs. remove_rx_bufs() can be called multiple times, so set rbd->skb to NULL to avoid double free. remove_rx_bufs() was moved upwards to be seen by init_rx_bufs(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:22 +00:00
if (skb == NULL) {
remove_rx_bufs(dev);
return -ENOMEM;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rbd->v_next = rbd+1;
rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1));
rbd->b_addr = WSWAPrbd(virt_to_bus(rbd));
rbd->skb = skb;
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 22:25:31 +00:00
rbd->v_data = skb->data;
rbd->b_data = WSWAPchar(virt_to_bus(skb->data));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rbd->size = PKT_BUF_SZ;
#ifdef __mc68000__
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 22:25:31 +00:00
cache_clear(virt_to_phys(skb->data), PKT_BUF_SZ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
}
lp->rbd_head = lp->rbds;
rbd = lp->rbds + rx_ring_size - 1;
rbd->v_next = lp->rbds;
rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds));
/* Now build the Receive Frame Descriptor List */
for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
rfd->rbd = I596_NULL;
rfd->v_next = rfd+1;
rfd->v_prev = rfd-1;
rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1));
rfd->cmd = CMD_FLEX;
}
lp->rfd_head = lp->rfds;
lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
rfd = lp->rfds;
rfd->rbd = lp->rbd_head;
rfd->v_prev = lp->rfds + rx_ring_size - 1;
rfd = lp->rfds + rx_ring_size - 1;
rfd->v_next = lp->rfds;
rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds));
rfd->cmd = CMD_EOL|CMD_FLEX;
82596: do not panic on out of memory If dev_alloc_skb() failed then free already allocated skbs. remove_rx_bufs() can be called multiple times, so set rbd->skb to NULL to avoid double free. remove_rx_bufs() was moved upwards to be seen by init_rx_bufs(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:22 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void rebuild_rx_bufs(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int i;
/* Ensure rx frame/buffer descriptors are tidy */
for (i = 0; i < rx_ring_size; i++) {
lp->rfds[i].rbd = I596_NULL;
lp->rfds[i].cmd = CMD_FLEX;
}
lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
lp->rfd_head = lp->rfds;
lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
lp->rbd_head = lp->rbds;
lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds));
}
static int init_i596_mem(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long flags;
MPU_PORT(dev, PORT_RESET, NULL);
udelay(100); /* Wait 100us - seems to help */
#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
/* Disable all ints for now */
pcc2[0x28] = 1;
pcc2[0x2a] = 0x48;
/* Following disables snooping. Snooping is not required
* as we make appropriate use of non-cached pages for
* shared data, and cache_push/cache_clear.
*/
pcc2[0x2b] = 0x08;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
*ethirq = 1;
}
#endif
/* change the scp address */
MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp));
#endif
lp->last_cmd = jiffies;
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x)
lp->scp.sysbus = 0x00000054;
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000)
lp->scp.sysbus = 0x0000004c;
#endif
lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp));
lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb));
lp->iscp.stat = ISCP_BUSY;
lp->cmd_backlog = 0;
lp->cmd_head = lp->scb.cmd = I596_NULL;
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
lp->scb.t_on = 7 * 25;
lp->scb.t_off = 1 * 25;
}
#endif
DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
CA(dev);
if (wait_istat(dev,lp,1000,"initialization timed out"))
goto failed;
DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
/* Ensure rx frame/buffer descriptors are tidy */
rebuild_rx_bufs(dev);
lp->scb.command = 0;
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
/* Enable ints, etc. now */
pcc2[0x2a] = 0x55; /* Edge sensitive */
pcc2[0x2b] = 0x15;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
*ethirq = 3;
}
#endif
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
memcpy(lp->cf_cmd.i596_config, init_setup, 14);
lp->cf_cmd.cmd.command = CmdConfigure;
i596_add_cmd(dev, &lp->cf_cmd.cmd);
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
net:drivers/net: Miscellaneous conversions to ETH_ALEN Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 02:04:40 +00:00
memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, ETH_ALEN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
lp->sa_cmd.cmd.command = CmdSASetup;
i596_add_cmd(dev, &lp->sa_cmd.cmd);
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
lp->tdr_cmd.cmd.command = CmdTDR;
i596_add_cmd(dev, &lp->tdr_cmd.cmd);
spin_lock_irqsave (&lp->lock, flags);
if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) {
spin_unlock_irqrestore (&lp->lock, flags);
goto failed;
}
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
lp->scb.command = RX_START;
CA(dev);
spin_unlock_irqrestore (&lp->lock, flags);
if (wait_cmd(dev,lp,1000,"RX_START not processed"))
goto failed;
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
return 0;
failed:
printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name);
MPU_PORT(dev, PORT_RESET, NULL);
return -1;
}
static inline int i596_rx(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct i596_rfd *rfd;
struct i596_rbd *rbd;
int frames = 0;
DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
lp->rfd_head, lp->rbd_head));
rfd = lp->rfd_head; /* Ref next frame to check */
while ((rfd->stat) & STAT_C) { /* Loop while complete frames */
if (rfd->rbd == I596_NULL)
rbd = I596_NULL;
else if (rfd->rbd == lp->rbd_head->b_addr)
rbd = lp->rbd_head;
else {
printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name);
/* XXX Now what? */
rbd = I596_NULL;
}
DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n",
rfd, rfd->rbd, rfd->stat));
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 17:24:59 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) {
/* a good frame */
int pkt_len = rbd->count & 0x3fff;
struct sk_buff *skb = rbd->skb;
int rx_in_place = 0;
DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
frames++;
/* Check if the packet is long enough to just accept
* without copying to a properly sized skbuff.
*/
if (pkt_len > rx_copybreak) {
struct sk_buff *newskb;
/* Get fresh skbuff to replace filled one. */
netdev: ethernet dev_alloc_skb to netdev_alloc_skb Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05 02:50:38 +00:00
newskb = netdev_alloc_skb(dev, PKT_BUF_SZ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (newskb == NULL) {
skb = NULL; /* drop pkt */
goto memory_squeeze;
}
/* Pass up the skb already on the Rx ring. */
skb_put(skb, pkt_len);
rx_in_place = 1;
rbd->skb = newskb;
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 22:25:31 +00:00
rbd->v_data = newskb->data;
rbd->b_data = WSWAPchar(virt_to_bus(newskb->data));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __mc68000__
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 22:25:31 +00:00
cache_clear(virt_to_phys(newskb->data), PKT_BUF_SZ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08 15:03:25 +00:00
} else {
netdev: ethernet dev_alloc_skb to netdev_alloc_skb Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05 02:50:38 +00:00
skb = netdev_alloc_skb(dev, pkt_len + 2);
drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08 15:03:25 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
memory_squeeze:
if (skb == NULL) {
/* XXX tulip.c can defer packets here!! */
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_dropped++;
drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08 15:03:25 +00:00
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!rx_in_place) {
/* 16 byte align the data fields */
skb_reserve(skb, 2);
memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
}
skb->protocol=eth_type_trans(skb,dev);
skb->len = pkt_len;
#ifdef __mc68000__
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 22:25:31 +00:00
cache_clear(virt_to_phys(rbd->skb->data),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pkt_len);
#endif
netif_rx(skb);
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_packets++;
dev->stats.rx_bytes+=pkt_len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
else {
DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
dev->name, rfd->stat));
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0001)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.collisions++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0080)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_length_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0100)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_over_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0200)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_fifo_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0400)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_frame_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x0800)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_crc_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((rfd->stat) & 0x1000)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_length_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* Clear the buffer descriptor count and EOF + F flags */
if (rbd != I596_NULL && (rbd->count & 0x4000)) {
rbd->count = 0;
lp->rbd_head = rbd->v_next;
}
/* Tidy the frame descriptor, marking it as end of list */
rfd->rbd = I596_NULL;
rfd->stat = 0;
rfd->cmd = CMD_EOL|CMD_FLEX;
rfd->count = 0;
/* Remove end-of-list from old end descriptor */
rfd->v_prev->cmd = CMD_FLEX;
/* Update record of next frame descriptor to process */
lp->scb.rfd = rfd->b_next;
lp->rfd_head = rfd->v_next;
rfd = lp->rfd_head;
}
DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
return 0;
}
[PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 05:59:57 +00:00
static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct i596_cmd *ptr;
while (lp->cmd_head != I596_NULL) {
ptr = lp->cmd_head;
lp->cmd_head = ptr->v_next;
lp->cmd_backlog--;
switch ((ptr->command) & 0x7) {
case CmdTx:
{
struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
struct sk_buff *skb = tx_cmd->skb;
dev_kfree_skb(skb);
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_errors++;
dev->stats.tx_aborted_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ptr->v_next = ptr->b_next = I596_NULL;
tx_cmd->cmd.command = 0; /* Mark as free */
break;
}
default:
ptr->v_next = ptr->b_next = I596_NULL;
}
}
wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out");
lp->scb.cmd = I596_NULL;
}
[PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 05:59:57 +00:00
static void i596_reset(struct net_device *dev, struct i596_private *lp,
int ioaddr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long flags;
DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
spin_lock_irqsave (&lp->lock, flags);
wait_cmd(dev,lp,100,"i596_reset timed out");
netif_stop_queue(dev);
lp->scb.command = CUC_ABORT | RX_ABORT;
CA(dev);
/* wait for shutdown */
wait_cmd(dev,lp,1000,"i596_reset 2 timed out");
spin_unlock_irqrestore (&lp->lock, flags);
i596_cleanup_cmd(dev,lp);
i596_rx(dev);
netif_start_queue(dev);
init_i596_mem(dev);
}
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int ioaddr = dev->base_addr;
unsigned long flags;
DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
cmd->status = 0;
cmd->command |= (CMD_EOL | CMD_INTR);
cmd->v_next = cmd->b_next = I596_NULL;
spin_lock_irqsave (&lp->lock, flags);
if (lp->cmd_head != I596_NULL) {
lp->cmd_tail->v_next = cmd;
lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status));
} else {
lp->cmd_head = cmd;
wait_cmd(dev,lp,100,"i596_add_cmd timed out");
lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status));
lp->scb.command = CUC_START;
CA(dev);
}
lp->cmd_tail = cmd;
lp->cmd_backlog++;
spin_unlock_irqrestore (&lp->lock, flags);
if (lp->cmd_backlog > max_cmd_backlog) {
unsigned long tickssofar = jiffies - lp->last_cmd;
if (tickssofar < ticks_limit)
return;
printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);
i596_reset(dev, lp, ioaddr);
}
}
static int i596_open(struct net_device *dev)
{
int res = 0;
DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
return -EAGAIN;
}
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
if (request_irq(0x56, i596_error, 0, "i82596_error", dev)) {
res = -EAGAIN;
goto err_irq_dev;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
82596: do not panic on out of memory If dev_alloc_skb() failed then free already allocated skbs. remove_rx_bufs() can be called multiple times, so set rbd->skb to NULL to avoid double free. remove_rx_bufs() was moved upwards to be seen by init_rx_bufs(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:22 +00:00
res = init_rx_bufs(dev);
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
if (res)
goto err_irq_56;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netif_start_queue(dev);
if (init_i596_mem(dev)) {
res = -EAGAIN;
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
goto err_queue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
return 0;
err_queue:
netif_stop_queue(dev);
remove_rx_bufs(dev);
err_irq_56:
#ifdef ENABLE_MVME16x_NET
free_irq(0x56, dev);
err_irq_dev:
drivers/net/82596.c: fix warning drivers/net/82596.c: In function 'i596_open': drivers/net/82596.c:1044: warning: label 'err_irq_dev' defined but not used Caused by "82596: free resources on error" Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19 22:27:13 +00:00
#endif
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
free_irq(dev->irq, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return res;
}
static void i596_tx_timeout (struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
dev->name));
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Try to restart the adaptor */
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
if (lp->last_restart == dev->stats.tx_packets) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
/* Shutdown and restart */
i596_reset (dev, lp, ioaddr);
} else {
/* Issue a channel attention signal */
DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
lp->scb.command = CUC_START | RX_START;
CA (dev);
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
lp->last_restart = dev->stats.tx_packets;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net: trans_start cleanups Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 12:01:31 +00:00
dev->trans_start = jiffies; /* prevent tx timeout */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netif_wake_queue (dev);
}
netdev: convert bulk of drivers to netdev_tx_t In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:50:58 +00:00
static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct tx_cmd *tx_cmd;
struct i596_tbd *tbd;
short length = skb->len;
82596 warning fixes drivers/net/82596.c: In function 'i596_start_xmit': drivers/net/82596.c:1069: warning: cast from pointer to integer of different size drivers/net/82596.c: In function 'i82596_probe': drivers/net/82596.c:1249: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-27 08:00:04 +00:00
DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
dev->name, skb->len, skb->data));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (skb->len < ETH_ZLEN) {
[NET]: Avoid allocating skb in skb_pad First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 09:06:41 +00:00
if (skb_padto(skb, ETH_ZLEN))
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 06:03:08 +00:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
length = ETH_ZLEN;
}
netif_stop_queue(dev);
tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
tbd = lp->tbds + lp->next_tx_cmd;
if (tx_cmd->cmd.command) {
printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",
dev->name);
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_dropped++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev_kfree_skb(skb);
} else {
if (++lp->next_tx_cmd == TX_RING_SIZE)
lp->next_tx_cmd = 0;
tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd));
tbd->next = I596_NULL;
tx_cmd->cmd.command = CMD_FLEX | CmdTx;
tx_cmd->skb = skb;
tx_cmd->pad = 0;
tx_cmd->size = 0;
tbd->pad = 0;
tbd->size = EOF | length;
tbd->data = WSWAPchar(virt_to_bus(skb->data));
#ifdef __mc68000__
cache_push(virt_to_phys(skb->data), length);
#endif
DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
i596_add_cmd(dev, &tx_cmd->cmd);
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_packets++;
dev->stats.tx_bytes += length;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
netif_start_queue(dev);
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 06:03:08 +00:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void print_eth(unsigned char *add, char *str)
{
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 22:59:26 +00:00
printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
add, add + 6, add, add[12], add[13], str);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int io = 0x300;
static int irq = 10;
dmascc: convert to internal net_device_ops Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-09 13:01:42 +00:00
static const struct net_device_ops i596_netdev_ops = {
.ndo_open = i596_open,
.ndo_stop = i596_close,
.ndo_start_xmit = i596_start_xmit,
net: remove use of ndo_set_multicast_list in drivers replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 06:29:01 +00:00
.ndo_set_rx_mode = set_multicast_list,
dmascc: convert to internal net_device_ops Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-09 13:01:42 +00:00
.ndo_tx_timeout = i596_tx_timeout,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct net_device * __init i82596_probe(int unit)
{
struct net_device *dev;
int i;
struct i596_private *lp;
char eth_addr[8];
static int probed;
int err;
if (probed)
return ERR_PTR(-ENODEV);
probed++;
dev = alloc_etherdev(0);
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
} else {
dev->base_addr = io;
dev->irq = irq;
}
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) {
printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");
err = -ENODEV;
goto out;
}
net:drivers/net: Miscellaneous conversions to ETH_ALEN Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 02:04:40 +00:00
memcpy(eth_addr, (void *) 0xfffc1f2c, ETH_ALEN); /* YUCK! Get addr from NOVRAM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev->base_addr = MVME_I596_BASE;
dev->irq = (unsigned) MVME16x_IRQ_I596;
m68k: Some network drivers do not check the platform Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-18 18:47:16 +00:00
goto found;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE;
unsigned char msr = rtc[3];
int i;
rtc[3] |= 0x80;
for (i = 0; i < 6; i++)
eth_addr[i] = rtc[i * 4 + 7]; /* Stored in RTC RAM at offset 1 */
rtc[3] = msr;
dev->base_addr = BVME_I596_BASE;
dev->irq = (unsigned) BVME_IRQ_I596;
m68k: Some network drivers do not check the platform Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-18 18:47:16 +00:00
goto found;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
m68k: Some network drivers do not check the platform Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-18 18:47:16 +00:00
err = -ENODEV;
goto out;
found:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
if (!dev->mem_start) {
err = -ENOMEM;
goto out1;
}
DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
for (i = 0; i < 6; i++)
DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]));
DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
/* The 82596-specific entries in the device structure. */
dmascc: convert to internal net_device_ops Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-09 13:01:42 +00:00
dev->netdev_ops = &i596_netdev_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev->watchdog_timeo = TX_TIMEOUT;
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
dev->ml_priv = (void *)(dev->mem_start);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
lp = dev->ml_priv;
82596 warning fixes drivers/net/82596.c: In function 'i596_start_xmit': drivers/net/82596.c:1069: warning: cast from pointer to integer of different size drivers/net/82596.c: In function 'i82596_probe': drivers/net/82596.c:1249: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-27 08:00:04 +00:00
DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
"lp->scb at 0x%08lx\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev->name, (unsigned long)lp,
sizeof(struct i596_private), (unsigned long)&lp->scb));
memset((void *) lp, 0, sizeof(struct i596_private));
#ifdef __mc68000__
cache_push(virt_to_phys((void *)(dev->mem_start)), 4096);
cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096);
kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER);
#endif
lp->scb.command = 0;
lp->scb.cmd = I596_NULL;
lp->scb.rfd = I596_NULL;
spin_lock_init(&lp->lock);
err = register_netdev(dev);
if (err)
goto out2;
return dev;
out2:
#ifdef __mc68000__
/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
* XXX which may be invalid (CONFIG_060_WRITETHROUGH)
*/
kernel_set_cachemode((void *)(dev->mem_start), 4096,
IOMAP_FULL_CACHING);
#endif
free_page ((u32)(dev->mem_start));
out1:
out:
free_netdev(dev);
return ERR_PTR(err);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t i596_interrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = dev_id;
struct i596_private *lp;
short ioaddr;
unsigned short status, ack_cmd = 0;
int handled = 0;
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
i596_error(irq, dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return IRQ_HANDLED;
}
}
#endif
if (dev == NULL) {
printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq);
return IRQ_NONE;
}
ioaddr = dev->base_addr;
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock (&lp->lock);
wait_cmd(dev,lp,100,"i596 interrupt, timeout");
status = lp->scb.status;
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
dev->name, irq, status));
ack_cmd = status & 0xf000;
if ((status & 0x8000) || (status & 0x2000)) {
struct i596_cmd *ptr;
handled = 1;
if ((status & 0x8000))
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
if ((status & 0x2000))
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) {
ptr = lp->cmd_head;
DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
lp->cmd_head->status, lp->cmd_head->command));
lp->cmd_head = ptr->v_next;
lp->cmd_backlog--;
switch ((ptr->command) & 0x7) {
case CmdTx:
{
struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
struct sk_buff *skb = tx_cmd->skb;
if ((ptr->status) & STAT_OK) {
DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));
} else {
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((ptr->status) & 0x0020)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.collisions++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!((ptr->status) & 0x0040))
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_heartbeat_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((ptr->status) & 0x0400)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_carrier_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((ptr->status) & 0x0800)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.collisions++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ((ptr->status) & 0x1000)
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.tx_aborted_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
dev_kfree_skb_irq(skb);
tx_cmd->cmd.command = 0; /* Mark free */
break;
}
case CmdTDR:
{
unsigned short status = ((struct tdr_cmd *)ptr)->status;
if (status & 0x8000) {
DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
} else {
if (status & 0x4000)
printk(KERN_ERR "%s: Transceiver problem.\n", dev->name);
if (status & 0x2000)
printk(KERN_ERR "%s: Termination problem.\n", dev->name);
if (status & 0x1000)
printk(KERN_ERR "%s: Short circuit.\n", dev->name);
DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
}
break;
}
case CmdConfigure:
case CmdMulticastList:
/* Zap command so set_multicast_list() knows it is free */
ptr->command = 0;
break;
}
ptr->v_next = ptr->b_next = I596_NULL;
lp->last_cmd = jiffies;
}
ptr = lp->cmd_head;
while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) {
ptr->command &= 0x1fff;
ptr = ptr->v_next;
}
if ((lp->cmd_head != I596_NULL))
ack_cmd |= CUC_START;
lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status));
}
if ((status & 0x1000) || (status & 0x4000)) {
if ((status & 0x4000))
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
i596_rx(dev);
/* Only RX_START if stopped - RGH 07-07-96 */
if (status & 0x1000) {
if (netif_running(dev)) {
DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
ack_cmd |= RX_START;
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:41:50 +00:00
dev->stats.rx_errors++;
dev->stats.rx_fifo_errors++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rebuild_rx_bufs(dev);
}
}
}
wait_cmd(dev,lp,100,"i596 interrupt, timeout");
lp->scb.command = ack_cmd;
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
/* Ack the interrupt */
volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
pcc2[0x2a] |= 0x08;
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
*ethirq = 1;
*ethirq = 3;
}
#endif
CA(dev);
DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
spin_unlock (&lp->lock);
return IRQ_RETVAL(handled);
}
static int i596_close(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long flags;
netif_stop_queue(dev);
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
dev->name, lp->scb.status));
spin_lock_irqsave(&lp->lock, flags);
wait_cmd(dev,lp,100,"close1 timed out");
lp->scb.command = CUC_ABORT | RX_ABORT;
CA(dev);
wait_cmd(dev,lp,100,"close2 timed out");
spin_unlock_irqrestore(&lp->lock, flags);
DEB(DEB_STRUCT,i596_display_data(dev));
i596_cleanup_cmd(dev,lp);
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
/* Disable all ints */
pcc2[0x28] = 1;
pcc2[0x2a] = 0x40;
pcc2[0x2b] = 0x40; /* Set snooping bits now! */
}
#endif
#ifdef ENABLE_BVME6000_NET
if (MACH_IS_BVME6000) {
volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
*ethirq = 1;
}
#endif
82596: free resources on error IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 02:25:40 +00:00
#ifdef ENABLE_MVME16x_NET
free_irq(0x56, dev);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
free_irq(dev->irq, dev);
remove_rx_bufs(dev);
return 0;
}
/*
* Set or clear the multicast filter for this adaptor.
*/
static void set_multicast_list(struct net_device *dev)
{
netdevice: 82596: Convert netdev->priv to netdev_priv 1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 09:01:00 +00:00
struct i596_private *lp = dev->ml_priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int config = 0, cnt;
DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
net: use netdev_mc_count and netdev_mc_empty when appropriate This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 04:30:35 +00:00
dev->name, netdev_mc_count(dev),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev->flags & IFF_PROMISC ? "ON" : "OFF",
dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out"))
return;
if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
lp->cf_cmd.i596_config[8] |= 0x01;
config = 1;
}
if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
lp->cf_cmd.i596_config[8] &= ~0x01;
config = 1;
}
if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
lp->cf_cmd.i596_config[11] &= ~0x20;
config = 1;
}
if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
lp->cf_cmd.i596_config[11] |= 0x20;
config = 1;
}
if (config) {
lp->cf_cmd.cmd.command = CmdConfigure;
i596_add_cmd(dev, &lp->cf_cmd.cmd);
}
net: use netdev_mc_count and netdev_mc_empty when appropriate This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 04:30:35 +00:00
cnt = netdev_mc_count(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (cnt > MAX_MC_CNT)
{
cnt = MAX_MC_CNT;
printk(KERN_ERR "%s: Only %d multicast addresses supported",
dev->name, cnt);
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 17:24:59 +00:00
net: use netdev_mc_count and netdev_mc_empty when appropriate This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 04:30:35 +00:00
if (!netdev_mc_empty(dev)) {
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 21:22:57 +00:00
struct netdev_hw_addr *ha;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned char *cp;
struct mc_cmd *cmd;
if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out"))
return;
cmd = &lp->mc_cmd;
cmd->cmd.command = CmdMulticastList;
net: convert multiple drivers to use netdev_for_each_mc_addr, part3 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20 00:13:58 +00:00
cmd->mc_cnt = cnt * ETH_ALEN;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cp = cmd->mc_addrs;
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 21:22:57 +00:00
netdev_for_each_mc_addr(ha, dev) {
net: convert multiple drivers to use netdev_for_each_mc_addr, part3 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20 00:13:58 +00:00
if (!cnt--)
break;
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 21:22:57 +00:00
memcpy(cp, ha->addr, ETH_ALEN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (i596_debug > 1)
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 22:59:26 +00:00
DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
dev->name, cp));
net: convert multiple drivers to use netdev_for_each_mc_addr, part3 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20 00:13:58 +00:00
cp += ETH_ALEN;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
i596_add_cmd(dev, &cmd->cmd);
}
}
#ifdef MODULE
static struct net_device *dev_82596;
static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "i82596 debug mask");
[PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 05:59:57 +00:00
int __init init_module(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (debug >= 0)
i596_debug = debug;
dev_82596 = i82596_probe(-1);
net:drivers/net: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO This patch fixes coccinelle error regarding usage of IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-06 07:58:13 +00:00
return PTR_ERR_OR_ZERO(dev_82596);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 05:59:57 +00:00
void __exit cleanup_module(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unregister_netdev(dev_82596);
#ifdef __mc68000__
/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
* XXX which may be invalid (CONFIG_060_WRITETHROUGH)
*/
kernel_set_cachemode((void *)(dev_82596->mem_start), 4096,
IOMAP_FULL_CACHING);
#endif
free_page ((u32)(dev_82596->mem_start));
free_netdev(dev_82596);
}
#endif /* MODULE */
Reference in New Issue Copy Permalink