linux/drivers/acpi/scan.c

1766 lines
46 KiB
C
Raw Normal View History

/*
* scan.c - support for transforming the ACPI namespace into individual objects
*/
#include <linux/module.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/signal.h>
#include <linux/kthread.h>
#include <linux/dmi.h>
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-02 18:43:23 +00:00
#include <linux/nls.h>
#include <acpi/acpi_drivers.h>
#include "internal.h"
#define _COMPONENT ACPI_BUS_COMPONENT
ACPI_MODULE_NAME("scan");
#define STRUCT_TO_INT(s) (*((int*)&s))
extern struct acpi_device *acpi_root;
#define ACPI_BUS_CLASS "system_bus"
#define ACPI_BUS_HID "LNXSYBUS"
#define ACPI_BUS_DEVICE_NAME "System Bus"
#define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent)
static const char *dummy_hid = "device";
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
static DEFINE_MUTEX(acpi_scan_lock);
static LIST_HEAD(acpi_scan_handlers_list);
DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
struct acpi_device_bus_id{
char bus_id[15];
unsigned int instance_no;
struct list_head node;
};
int acpi_scan_add_handler(struct acpi_scan_handler *handler)
{
if (!handler || !handler->attach)
return -EINVAL;
list_add_tail(&handler->list_node, &acpi_scan_handlers_list);
return 0;
}
/*
* Creates hid/cid(s) string needed for modalias and uevent
* e.g. on a device with hid:IBM0001 and cid:ACPI0001 you get:
* char *modalias: "acpi:IBM0001:ACPI0001"
*/
static int create_modalias(struct acpi_device *acpi_dev, char *modalias,
int size)
{
int len;
int count;
struct acpi_hardware_id *id;
if (list_empty(&acpi_dev->pnp.ids))
return 0;
len = snprintf(modalias, size, "acpi:");
size -= len;
list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
count = snprintf(&modalias[len], size, "%s:", id->id);
if (count < 0 || count >= size)
return -EINVAL;
len += count;
size -= count;
}
modalias[len] = '\0';
return len;
}
static ssize_t
acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
int len;
/* Device has no HID and no CID or string is >1024 */
len = create_modalias(acpi_dev, buf, 1024);
if (len <= 0)
return 0;
buf[len++] = '\n';
return len;
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
/**
* acpi_bus_hot_remove_device: hot-remove a device and its children
* @context: struct acpi_eject_event pointer (freed in this func)
*
* Hot-remove a device and its children. This function frees up the
* memory space passed by arg context, so that the caller may call
* this function asynchronously through acpi_os_hotplug_execute().
*/
void acpi_bus_hot_remove_device(void *context)
{
struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
struct acpi_device *device = ej_event->device;
acpi_handle handle = device->handle;
acpi_handle temp;
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status = AE_OK;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
acpi_bus_trim(device);
/* Device node has been released. */
device = NULL;
/* power off device */
status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
printk(KERN_WARNING PREFIX
"Power-off device failed\n");
if (ACPI_SUCCESS(acpi_get_handle(handle, "_LCK", &temp))) {
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = 0;
acpi_evaluate_object(handle, "_LCK", &arg_list, NULL);
}
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = 1;
/*
* TBD: _EJD support.
*/
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND)
printk(KERN_WARNING PREFIX
"Eject device failed\n");
goto err_out;
}
kfree(context);
return;
err_out:
/* Inform firmware the hot-remove operation has completed w/ error */
(void) acpi_evaluate_hotplug_ost(handle,
ej_event->event, ost_code, NULL);
kfree(context);
return;
}
EXPORT_SYMBOL(acpi_bus_hot_remove_device);
static ssize_t real_power_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct acpi_device *adev = to_acpi_device(dev);
int state;
int ret;
ret = acpi_device_get_power(adev, &state);
if (ret)
return ret;
return sprintf(buf, "%s\n", acpi_power_state_string(state));
}
static DEVICE_ATTR(real_power_state, 0444, real_power_state_show, NULL);
static ssize_t power_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct acpi_device *adev = to_acpi_device(dev);
return sprintf(buf, "%s\n", acpi_power_state_string(adev->power.state));
}
static DEVICE_ATTR(power_state, 0444, power_state_show, NULL);
static ssize_t
acpi_eject_store(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret = count;
acpi_status status;
acpi_object_type type = 0;
struct acpi_device *acpi_device = to_acpi_device(d);
struct acpi_eject_event *ej_event;
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
}
#ifndef FORCE_EJECT
if (acpi_device->driver == NULL) {
ret = -ENODEV;
goto err;
}
#endif
status = acpi_get_type(acpi_device->handle, &type);
if (ACPI_FAILURE(status) || (!acpi_device->flags.ejectable)) {
ret = -ENODEV;
goto err;
}
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
if (!ej_event) {
ret = -ENOMEM;
goto err;
}
ej_event->device = acpi_device;
if (acpi_device->flags.eject_pending) {
/* event originated from ACPI eject notification */
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
acpi_device->flags.eject_pending = 0;
} else {
/* event originated from user */
ej_event->event = ACPI_OST_EC_OSPM_EJECT;
(void) acpi_evaluate_hotplug_ost(acpi_device->handle,
ej_event->event, ACPI_OST_SC_EJECT_IN_PROGRESS, NULL);
}
acpi_os_hotplug_execute(acpi_bus_hot_remove_device, (void *)ej_event);
err:
return ret;
}
static DEVICE_ATTR(eject, 0200, NULL, acpi_eject_store);
static ssize_t
acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
return sprintf(buf, "%s\n", acpi_device_hid(acpi_dev));
}
static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
static ssize_t acpi_device_uid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
return sprintf(buf, "%s\n", acpi_dev->pnp.unique_id);
}
static DEVICE_ATTR(uid, 0444, acpi_device_uid_show, NULL);
static ssize_t acpi_device_adr_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
return sprintf(buf, "0x%08x\n",
(unsigned int)(acpi_dev->pnp.bus_address));
}
static DEVICE_ATTR(adr, 0444, acpi_device_adr_show, NULL);
static ssize_t
acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_buffer path = {ACPI_ALLOCATE_BUFFER, NULL};
int result;
result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
if (result)
goto end;
result = sprintf(buf, "%s\n", (char*)path.pointer);
kfree(path.pointer);
end:
return result;
}
static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-02 18:43:23 +00:00
/* sysfs file that shows description text from the ACPI _STR method */
static ssize_t description_show(struct device *dev,
struct device_attribute *attr,
char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
int result;
if (acpi_dev->pnp.str_obj == NULL)
return 0;
/*
* The _STR object contains a Unicode identifier for a device.
* We need to convert to utf-8 so it can be displayed.
*/
result = utf16s_to_utf8s(
(wchar_t *)acpi_dev->pnp.str_obj->buffer.pointer,
acpi_dev->pnp.str_obj->buffer.length,
UTF16_LITTLE_ENDIAN, buf,
PAGE_SIZE);
buf[result++] = '\n';
return result;
}
static DEVICE_ATTR(description, 0444, description_show, NULL);
static ssize_t
acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
}
static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
static int acpi_device_setup_files(struct acpi_device *dev)
{
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-02 18:43:23 +00:00
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
acpi_status status;
acpi_handle temp;
unsigned long long sun;
int result = 0;
/*
* Devices gotten from FADT don't have a "path" attribute
*/
if (dev->handle) {
result = device_create_file(&dev->dev, &dev_attr_path);
if (result)
goto end;
}
if (!list_empty(&dev->pnp.ids)) {
result = device_create_file(&dev->dev, &dev_attr_hid);
if (result)
goto end;
result = device_create_file(&dev->dev, &dev_attr_modalias);
if (result)
goto end;
}
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-02 18:43:23 +00:00
/*
* If device has _STR, 'description' file is created
*/
status = acpi_get_handle(dev->handle, "_STR", &temp);
if (ACPI_SUCCESS(status)) {
status = acpi_evaluate_object(dev->handle, "_STR",
NULL, &buffer);
if (ACPI_FAILURE(status))
buffer.pointer = NULL;
dev->pnp.str_obj = buffer.pointer;
result = device_create_file(&dev->dev, &dev_attr_description);
if (result)
goto end;
}
if (dev->flags.bus_address)
result = device_create_file(&dev->dev, &dev_attr_adr);
if (dev->pnp.unique_id)
result = device_create_file(&dev->dev, &dev_attr_uid);
status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
if (ACPI_SUCCESS(status)) {
dev->pnp.sun = (unsigned long)sun;
result = device_create_file(&dev->dev, &dev_attr_sun);
if (result)
goto end;
} else {
dev->pnp.sun = (unsigned long)-1;
}
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
* hot-removal function from userland.
*/
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status)) {
result = device_create_file(&dev->dev, &dev_attr_eject);
if (result)
return result;
}
if (dev->flags.power_manageable) {
result = device_create_file(&dev->dev, &dev_attr_power_state);
if (result)
return result;
if (dev->power.flags.power_resources)
result = device_create_file(&dev->dev,
&dev_attr_real_power_state);
}
end:
return result;
}
static void acpi_device_remove_files(struct acpi_device *dev)
{
acpi_status status;
acpi_handle temp;
if (dev->flags.power_manageable) {
device_remove_file(&dev->dev, &dev_attr_power_state);
if (dev->power.flags.power_resources)
device_remove_file(&dev->dev,
&dev_attr_real_power_state);
}
/*
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-02 18:43:23 +00:00
* If device has _STR, remove 'description' file
*/
status = acpi_get_handle(dev->handle, "_STR", &temp);
if (ACPI_SUCCESS(status)) {
kfree(dev->pnp.str_obj);
device_remove_file(&dev->dev, &dev_attr_description);
}
/*
* If device has _EJ0, remove 'eject' file.
*/
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
status = acpi_get_handle(dev->handle, "_SUN", &temp);
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_sun);
if (dev->pnp.unique_id)
device_remove_file(&dev->dev, &dev_attr_uid);
if (dev->flags.bus_address)
device_remove_file(&dev->dev, &dev_attr_adr);
device_remove_file(&dev->dev, &dev_attr_modalias);
device_remove_file(&dev->dev, &dev_attr_hid);
if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
/* --------------------------------------------------------------------------
ACPI Bus operations
-------------------------------------------------------------------------- */
static const struct acpi_device_id *__acpi_match_device(
struct acpi_device *device, const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
struct acpi_hardware_id *hwid;
/*
* If the device is not present, it is unnecessary to load device
* driver for it.
*/
if (!device->status.present)
return NULL;
for (id = ids; id->id[0]; id++)
list_for_each_entry(hwid, &device->pnp.ids, list)
if (!strcmp((char *) id->id, hwid->id))
return id;
return NULL;
}
/**
* acpi_match_device - Match a struct device against a given list of ACPI IDs
* @ids: Array of struct acpi_device_id object to match against.
* @dev: The device structure to match.
*
* Check if @dev has a valid ACPI handle and if there is a struct acpi_device
* object for that handle and use that object to match against a given list of
* device IDs.
*
* Return a pointer to the first matching ID on success or %NULL on failure.
*/
const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
const struct device *dev)
{
struct acpi_device *adev;
if (!ids || !ACPI_HANDLE(dev)
|| ACPI_FAILURE(acpi_bus_get_device(ACPI_HANDLE(dev), &adev)))
return NULL;
return __acpi_match_device(adev, ids);
}
EXPORT_SYMBOL_GPL(acpi_match_device);
int acpi_match_device_ids(struct acpi_device *device,
const struct acpi_device_id *ids)
{
return __acpi_match_device(device, ids) ? 0 : -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
void acpi_free_ids(struct acpi_device *device)
{
struct acpi_hardware_id *id, *tmp;
list_for_each_entry_safe(id, tmp, &device->pnp.ids, list) {
kfree(id->id);
kfree(id);
}
kfree(device->pnp.unique_id);
}
static void acpi_free_power_resources_lists(struct acpi_device *device)
{
int i;
if (device->wakeup.flags.valid)
acpi_power_resources_list_free(&device->wakeup.resources);
if (!device->flags.power_manageable)
return;
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
struct acpi_device_power_state *ps = &device->power.states[i];
acpi_power_resources_list_free(&ps->resources);
}
}
static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
acpi_free_ids(acpi_dev);
acpi_free_power_resources_lists(acpi_dev);
kfree(acpi_dev);
}
static int acpi_bus_match(struct device *dev, struct device_driver *drv)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
return acpi_dev->flags.match_driver
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
&& !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
}
static int acpi_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
int len;
if (list_empty(&acpi_dev->pnp.ids))
return 0;
if (add_uevent_var(env, "MODALIAS="))
return -ENOMEM;
len = create_modalias(acpi_dev, &env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen);
if (len >= (sizeof(env->buf) - env->buflen))
return -ENOMEM;
env->buflen += len;
return 0;
}
static void acpi_device_notify(acpi_handle handle, u32 event, void *data)
{
struct acpi_device *device = data;
device->driver->ops.notify(device, event);
}
static acpi_status acpi_device_notify_fixed(void *data)
{
struct acpi_device *device = data;
/* Fixed hardware devices have no handles */
acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
return AE_OK;
}
static int acpi_device_install_notify_handler(struct acpi_device *device)
{
acpi_status status;
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed,
device);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed,
device);
else
status = acpi_install_notify_handler(device->handle,
ACPI_DEVICE_NOTIFY,
acpi_device_notify,
device);
if (ACPI_FAILURE(status))
return -EINVAL;
return 0;
}
static void acpi_device_remove_notify_handler(struct acpi_device *device)
{
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed);
else
acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
acpi_device_notify);
}
static int acpi_bus_driver_init(struct acpi_device *, struct acpi_driver *);
static int acpi_device_probe(struct device * dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
int ret;
ret = acpi_bus_driver_init(acpi_dev, acpi_drv);
if (!ret) {
if (acpi_drv->ops.notify) {
ret = acpi_device_install_notify_handler(acpi_dev);
if (ret) {
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev);
return ret;
}
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found driver [%s] for device [%s]\n",
acpi_drv->name, acpi_dev->pnp.bus_id));
get_device(dev);
}
return ret;
}
static int acpi_device_remove(struct device * dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv) {
if (acpi_drv->ops.notify)
acpi_device_remove_notify_handler(acpi_dev);
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev);
}
acpi_dev->driver = NULL;
acpi_dev->driver_data = NULL;
put_device(dev);
return 0;
}
struct bus_type acpi_bus_type = {
.name = "acpi",
.match = acpi_bus_match,
.probe = acpi_device_probe,
.remove = acpi_device_remove,
.uevent = acpi_device_uevent,
};
int acpi_device_add(struct acpi_device *device,
void (*release)(struct device *))
{
int result;
struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
int found = 0;
if (device->handle) {
acpi_status status;
status = acpi_attach_data(device->handle, acpi_bus_data_handler,
device);
if (ACPI_FAILURE(status)) {
acpi_handle_err(device->handle,
"Unable to attach device data\n");
return -ENODEV;
}
}
/*
* Linkage
* -------
* Link this device to its parent and siblings.
*/
INIT_LIST_HEAD(&device->children);
INIT_LIST_HEAD(&device->node);
INIT_LIST_HEAD(&device->wakeup_list);
INIT_LIST_HEAD(&device->physical_node_list);
mutex_init(&device->physical_node_lock);
INIT_LIST_HEAD(&device->power_dependent);
new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
if (!new_bus_id) {
pr_err(PREFIX "Memory allocation error\n");
result = -ENOMEM;
goto err_detach;
}
mutex_lock(&acpi_device_lock);
/*
* Find suitable bus_id and instance number in acpi_bus_id_list
* If failed, create one and link it into acpi_bus_id_list
*/
list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
if (!strcmp(acpi_device_bus_id->bus_id,
acpi_device_hid(device))) {
acpi_device_bus_id->instance_no++;
found = 1;
kfree(new_bus_id);
break;
}
}
if (!found) {
acpi_device_bus_id = new_bus_id;
strcpy(acpi_device_bus_id->bus_id, acpi_device_hid(device));
acpi_device_bus_id->instance_no = 0;
list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
}
dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
if (device->parent)
list_add_tail(&device->node, &device->parent->children);
if (device->wakeup.flags.valid)
list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list);
mutex_unlock(&acpi_device_lock);
if (device->parent)
device->dev.parent = &device->parent->dev;
device->dev.bus = &acpi_bus_type;
device->dev.release = release;
result = device_add(&device->dev);
if (result) {
dev_err(&device->dev, "Error registering device\n");
goto err;
}
result = acpi_device_setup_files(device);
if (result)
printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
dev_name(&device->dev));
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
err:
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
list_del(&device->wakeup_list);
mutex_unlock(&acpi_device_lock);
err_detach:
acpi_detach_data(device->handle, acpi_bus_data_handler);
return result;
}
static void acpi_device_unregister(struct acpi_device *device)
{
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
list_del(&device->wakeup_list);
mutex_unlock(&acpi_device_lock);
acpi_detach_data(device->handle, acpi_bus_data_handler);
acpi_power_add_remove_device(device, false);
acpi_device_remove_files(device);
if (device->remove)
device->remove(device);
device_del(&device->dev);
/*
* Drop the reference counts of all power resources the device depends
* on and turn off the ones that have no more references.
*/
acpi_power_transition(device, ACPI_STATE_D3_COLD);
put_device(&device->dev);
}
/* --------------------------------------------------------------------------
Driver Management
-------------------------------------------------------------------------- */
/**
* acpi_bus_driver_init - add a device to a driver
* @device: the device to add and initialize
* @driver: driver for the device
*
* Used to initialize a device via its device driver. Called whenever a
* driver is bound to a device. Invokes the driver's add() ops.
*/
static int
acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
{
int result = 0;
if (!device || !driver)
return -EINVAL;
if (!driver->ops.add)
return -ENOSYS;
result = driver->ops.add(device);
if (result) {
device->driver = NULL;
device->driver_data = NULL;
return result;
}
device->driver = driver;
/*
* TBD - Configuration Management: Assign resources to device based
* upon possible configuration and currently allocated resources.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Driver successfully bound to device\n"));
return 0;
}
/**
* acpi_bus_register_driver - register a driver with the ACPI bus
* @driver: driver being registered
*
* Registers a driver with the ACPI bus. Searches the namespace for all
* devices that match the driver's criteria and binds. Returns zero for
* success or a negative error status for failure.
*/
int acpi_bus_register_driver(struct acpi_driver *driver)
{
int ret;
if (acpi_disabled)
return -ENODEV;
driver->drv.name = driver->name;
driver->drv.bus = &acpi_bus_type;
driver->drv.owner = driver->owner;
ret = driver_register(&driver->drv);
return ret;
}
EXPORT_SYMBOL(acpi_bus_register_driver);
/**
* acpi_bus_unregister_driver - unregisters a driver with the APIC bus
* @driver: driver to unregister
*
* Unregisters a driver with the ACPI bus. Searches the namespace for all
* devices that match the driver's criteria and unbinds.
*/
void acpi_bus_unregister_driver(struct acpi_driver *driver)
{
driver_unregister(&driver->drv);
}
EXPORT_SYMBOL(acpi_bus_unregister_driver);
/* --------------------------------------------------------------------------
Device Enumeration
-------------------------------------------------------------------------- */
static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
{
struct acpi_device *device = NULL;
acpi_status status;
/*
* Fixed hardware devices do not appear in the namespace and do not
* have handles, but we fabricate acpi_devices for them, so we have
* to deal with them specially.
*/
if (!handle)
return acpi_root;
do {
status = acpi_get_parent(handle, &handle);
if (ACPI_FAILURE(status))
return status == AE_NULL_ENTRY ? NULL : acpi_root;
} while (acpi_bus_get_device(handle, &device));
return device;
}
acpi_status
acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
{
acpi_status status;
acpi_handle tmp;
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *obj;
status = acpi_get_handle(handle, "_EJD", &tmp);
if (ACPI_FAILURE(status))
return status;
status = acpi_evaluate_object(handle, "_EJD", NULL, &buffer);
if (ACPI_SUCCESS(status)) {
obj = buffer.pointer;
status = acpi_get_handle(ACPI_ROOT_OBJECT, obj->string.pointer,
ejd);
kfree(buffer.pointer);
}
return status;
}
EXPORT_SYMBOL_GPL(acpi_bus_get_ejd);
void acpi_bus_data_handler(acpi_handle handle, void *context)
{
/* TBD */
return;
}
static int acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
struct acpi_device_wakeup *wakeup)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *package = NULL;
union acpi_object *element = NULL;
acpi_status status;
int err = -ENODATA;
if (!wakeup)
return -EINVAL;
INIT_LIST_HEAD(&wakeup->resources);
/* _PRW */
status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
return err;
}
package = (union acpi_object *)buffer.pointer;
if (!package || package->package.count < 2)
goto out;
element = &(package->package.elements[0]);
if (!element)
goto out;
if (element->type == ACPI_TYPE_PACKAGE) {
if ((element->package.count < 2) ||
(element->package.elements[0].type !=
ACPI_TYPE_LOCAL_REFERENCE)
|| (element->package.elements[1].type != ACPI_TYPE_INTEGER))
goto out;
wakeup->gpe_device =
element->package.elements[0].reference.handle;
wakeup->gpe_number =
(u32) element->package.elements[1].integer.value;
} else if (element->type == ACPI_TYPE_INTEGER) {
wakeup->gpe_device = NULL;
wakeup->gpe_number = element->integer.value;
} else {
goto out;
}
element = &(package->package.elements[1]);
if (element->type != ACPI_TYPE_INTEGER)
goto out;
wakeup->sleep_state = element->integer.value;
err = acpi_extract_power_resources(package, 2, &wakeup->resources);
if (err)
goto out;
if (!list_empty(&wakeup->resources)) {
int sleep_state;
sleep_state = acpi_power_min_system_level(&wakeup->resources);
if (sleep_state < wakeup->sleep_state) {
acpi_handle_warn(handle, "Overriding _PRW sleep state "
"(S%d) by S%d from power resources\n",
(int)wakeup->sleep_state, sleep_state);
wakeup->sleep_state = sleep_state;
}
}
acpi_setup_gpe_for_wake(handle, wakeup->gpe_device, wakeup->gpe_number);
ACPI / ACPICA: Do not execute _PRW methods during initialization Currently, during initialization ACPICA walks the entire ACPI namespace in search of any device objects with assciated _PRW methods. All of the _PRW methods found are executed in the process to extract the GPE information returned by them, so that the GPEs in question can be marked as "able to wakeup" (more precisely, the ACPI_GPE_CAN_WAKE flag is set for them). The only purpose of this exercise is to avoid enabling the CAN_WAKE GPEs automatically, even if there are _Lxx/_Exx methods associated with them. However, it is both costly and unnecessary, because the host OS has to execute the _PRW methods anyway to check which devices can wake up the system from sleep states. Moreover, it then uses full information returned by _PRW, including the GPE information, so it can take care of disabling the GPEs if necessary. Remove the code that walks the namespace and executes _PRW from ACPICA and modify comments to reflect that change. Make acpi_bus_set_run_wake_flags() disable GPEs for wakeup devices so that they don't cause spurious wakeup events to be signaled. This not only reduces the complexity of the ACPICA initialization code, but in some cases it should reduce the kernel boot time as well. Unfortunately, for this purpose we need a new ACPICA function, acpi_gpe_can_wake(), to be called by the host OS in order to disable the GPEs that can wake up the system and were previously enabled by acpi_ev_initialize_gpe_block() or acpi_ev_update_gpes() (such a GPE should be disabled only once, because the initialization code enables it only once, but it may be pointed to by _PRW for multiple devices and that's why the additional function is necessary). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-07 22:43:36 +00:00
out:
kfree(buffer.pointer);
return err;
}
static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
{
struct acpi_device_id button_device_ids[] = {
{"PNP0C0C", 0},
{"PNP0C0D", 0},
{"PNP0C0E", 0},
{"", 0},
};
acpi_status status;
acpi_event_status event_status;
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:44:09 +00:00
device->wakeup.flags.notifier_present = 0;
/* Power button, Lid switch always enable wakeup */
if (!acpi_match_device_ids(device, button_device_ids)) {
device->wakeup.flags.run_wake = 1;
if (!acpi_match_device_ids(device, &button_device_ids[1])) {
/* Do not use Lid/sleep button for S5 wakeup */
if (device->wakeup.sleep_state == ACPI_STATE_S5)
device->wakeup.sleep_state = ACPI_STATE_S4;
}
device_set_wakeup_capable(&device->dev, true);
return;
}
status = acpi_get_gpe_status(device->wakeup.gpe_device,
device->wakeup.gpe_number,
&event_status);
if (status == AE_OK)
device->wakeup.flags.run_wake =
!!(event_status & ACPI_EVENT_FLAG_HANDLE);
}
static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
{
acpi_handle temp;
acpi_status status = 0;
int err;
/* Presence of _PRW indicates wake capable */
status = acpi_get_handle(device->handle, "_PRW", &temp);
if (ACPI_FAILURE(status))
return;
err = acpi_bus_extract_wakeup_device_power_package(device->handle,
&device->wakeup);
if (err) {
dev_err(&device->dev, "_PRW evaluation error: %d\n", err);
return;
}
device->wakeup.flags.valid = 1;
device->wakeup.prepare_count = 0;
acpi_bus_set_run_wake_flags(device);
/* Call _PSW/_DSW object to disable its ability to wake the sleeping
* system for the ACPI device with the _PRW object.
* The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW.
* So it is necessary to call _DSW object first. Only when it is not
* present will the _PSW object used.
*/
err = acpi_device_sleep_wake(device, 0, 0, 0);
if (err)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"error in _DSW or _PSW evaluation\n"));
}
static void acpi_bus_init_power_state(struct acpi_device *device, int state)
{
struct acpi_device_power_state *ps = &device->power.states[state];
char pathname[5] = { '_', 'P', 'R', '0' + state, '\0' };
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
acpi_status status;
INIT_LIST_HEAD(&ps->resources);
/* Evaluate "_PRx" to get referenced power resources */
status = acpi_evaluate_object(device->handle, pathname, NULL, &buffer);
if (ACPI_SUCCESS(status)) {
union acpi_object *package = buffer.pointer;
if (buffer.length && package
&& package->type == ACPI_TYPE_PACKAGE
&& package->package.count) {
int err = acpi_extract_power_resources(package, 0,
&ps->resources);
if (!err)
device->power.flags.power_resources = 1;
}
ACPI_FREE(buffer.pointer);
}
/* Evaluate "_PSx" to see if we can do explicit sets */
pathname[2] = 'S';
status = acpi_get_handle(device->handle, pathname, &handle);
if (ACPI_SUCCESS(status))
ps->flags.explicit_set = 1;
/*
* State is valid if there are means to put the device into it.
* D3hot is only valid if _PR3 present.
*/
if (!list_empty(&ps->resources)
|| (ps->flags.explicit_set && state < ACPI_STATE_D3_HOT)) {
ps->flags.valid = 1;
ps->flags.os_accessible = 1;
}
ps->power = -1; /* Unknown - driver assigned */
ps->latency = -1; /* Unknown - driver assigned */
}
static void acpi_bus_get_power_flags(struct acpi_device *device)
{
acpi_status status;
acpi_handle handle;
u32 i;
/* Presence of _PS0|_PR0 indicates 'power manageable' */
status = acpi_get_handle(device->handle, "_PS0", &handle);
if (ACPI_FAILURE(status)) {
status = acpi_get_handle(device->handle, "_PR0", &handle);
if (ACPI_FAILURE(status))
return;
}
device->flags.power_manageable = 1;
/*
* Power Management Flags
*/
status = acpi_get_handle(device->handle, "_PSC", &handle);
if (ACPI_SUCCESS(status))
device->power.flags.explicit_get = 1;
status = acpi_get_handle(device->handle, "_IRC", &handle);
if (ACPI_SUCCESS(status))
device->power.flags.inrush_current = 1;
/*
* Enumerate supported power management states
*/
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++)
acpi_bus_init_power_state(device, i);
INIT_LIST_HEAD(&device->power.states[ACPI_STATE_D3_COLD].resources);
/* Set defaults for D0 and D3 states (always valid) */
device->power.states[ACPI_STATE_D0].flags.valid = 1;
device->power.states[ACPI_STATE_D0].power = 100;
device->power.states[ACPI_STATE_D3].flags.valid = 1;
device->power.states[ACPI_STATE_D3].power = 0;
ACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228 Reported-by: rocko <rockorequin@hotmail.com> Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: Peter <lekensteyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17 22:39:35 +00:00
/* Set D3cold's explicit_set flag if _PS3 exists. */
if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
/* Presence of _PS3 or _PRx means we can put the device into D3 cold */
if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
device->power.flags.power_resources)
device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
acpi_bus_init_power(device);
}
static void acpi_bus_get_flags(struct acpi_device *device)
{
acpi_status status = AE_OK;
acpi_handle temp = NULL;
/* Presence of _STA indicates 'dynamic_status' */
status = acpi_get_handle(device->handle, "_STA", &temp);
if (ACPI_SUCCESS(status))
device->flags.dynamic_status = 1;
/* Presence of _RMV indicates 'removable' */
status = acpi_get_handle(device->handle, "_RMV", &temp);
if (ACPI_SUCCESS(status))
device->flags.removable = 1;
/* Presence of _EJD|_EJ0 indicates 'ejectable' */
status = acpi_get_handle(device->handle, "_EJD", &temp);
if (ACPI_SUCCESS(status))
device->flags.ejectable = 1;
else {
status = acpi_get_handle(device->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status))
device->flags.ejectable = 1;
}
}
static void acpi_device_get_busid(struct acpi_device *device)
{
char bus_id[5] = { '?', 0 };
struct acpi_buffer buffer = { sizeof(bus_id), bus_id };
int i = 0;
/*
* Bus ID
* ------
* The device's Bus ID is simply the object name.
* TBD: Shouldn't this value be unique (within the ACPI namespace)?
*/
if (ACPI_IS_ROOT_DEVICE(device)) {
strcpy(device->pnp.bus_id, "ACPI");
return;
}
switch (device->device_type) {
case ACPI_BUS_TYPE_POWER_BUTTON:
strcpy(device->pnp.bus_id, "PWRF");
break;
case ACPI_BUS_TYPE_SLEEP_BUTTON:
strcpy(device->pnp.bus_id, "SLPF");
break;
default:
acpi_get_name(device->handle, ACPI_SINGLE_NAME, &buffer);
/* Clean up trailing underscores (if any) */
for (i = 3; i > 1; i--) {
if (bus_id[i] == '_')
bus_id[i] = '\0';
else
break;
}
strcpy(device->pnp.bus_id, bus_id);
break;
}
}
/*
* acpi_bay_match - see if a device is an ejectable driver bay
*
* If an acpi object is ejectable and has one of the ACPI ATA methods defined,
* then we can safely call it an ejectable drive bay
*/
static int acpi_bay_match(struct acpi_device *device){
acpi_status status;
acpi_handle handle;
acpi_handle tmp;
acpi_handle phandle;
handle = device->handle;
status = acpi_get_handle(handle, "_EJ0", &tmp);
if (ACPI_FAILURE(status))
return -ENODEV;
if ((ACPI_SUCCESS(acpi_get_handle(handle, "_GTF", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(handle, "_GTM", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(handle, "_STM", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(handle, "_SDD", &tmp))))
return 0;
if (acpi_get_parent(handle, &phandle))
return -ENODEV;
if ((ACPI_SUCCESS(acpi_get_handle(phandle, "_GTF", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(phandle, "_GTM", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(phandle, "_STM", &tmp))) ||
(ACPI_SUCCESS(acpi_get_handle(phandle, "_SDD", &tmp))))
return 0;
return -ENODEV;
}
/*
* acpi_dock_match - see if a device has a _DCK method
*/
static int acpi_dock_match(struct acpi_device *device)
{
acpi_handle tmp;
return acpi_get_handle(device->handle, "_DCK", &tmp);
}
const char *acpi_device_hid(struct acpi_device *device)
{
struct acpi_hardware_id *hid;
if (list_empty(&device->pnp.ids))
return dummy_hid;
hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
return hid->id;
}
EXPORT_SYMBOL(acpi_device_hid);
static void acpi_add_id(struct acpi_device *device, const char *dev_id)
{
struct acpi_hardware_id *id;
id = kmalloc(sizeof(*id), GFP_KERNEL);
if (!id)
return;
id->id = kstrdup(dev_id, GFP_KERNEL);
if (!id->id) {
kfree(id);
return;
}
list_add_tail(&id->list, &device->pnp.ids);
}
/*
* Old IBM workstations have a DSDT bug wherein the SMBus object
* lacks the SMBUS01 HID and the methods do not have the necessary "_"
* prefix. Work around this.
*/
static int acpi_ibm_smbus_match(struct acpi_device *device)
{
acpi_handle h_dummy;
struct acpi_buffer path = {ACPI_ALLOCATE_BUFFER, NULL};
int result;
if (!dmi_name_in_vendors("IBM"))
return -ENODEV;
/* Look for SMBS object */
result = acpi_get_name(device->handle, ACPI_SINGLE_NAME, &path);
if (result)
return result;
if (strcmp("SMBS", path.pointer)) {
result = -ENODEV;
goto out;
}
/* Does it have the necessary (but misnamed) methods? */
result = -ENODEV;
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "SBI", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "SBR", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "SBW", &h_dummy)))
result = 0;
out:
kfree(path.pointer);
return result;
}
static void acpi_device_set_id(struct acpi_device *device)
{
acpi_status status;
struct acpi_device_info *info;
struct acpi_pnp_device_id_list *cid_list;
int i;
switch (device->device_type) {
case ACPI_BUS_TYPE_DEVICE:
if (ACPI_IS_ROOT_DEVICE(device)) {
acpi_add_id(device, ACPI_SYSTEM_HID);
break;
}
status = acpi_get_object_info(device->handle, &info);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
return;
}
if (info->valid & ACPI_VALID_HID)
acpi_add_id(device, info->hardware_id.string);
if (info->valid & ACPI_VALID_CID) {
cid_list = &info->compatible_id_list;
for (i = 0; i < cid_list->count; i++)
acpi_add_id(device, cid_list->ids[i].string);
}
if (info->valid & ACPI_VALID_ADR) {
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
if (info->valid & ACPI_VALID_UID)
device->pnp.unique_id = kstrdup(info->unique_id.string,
GFP_KERNEL);
kfree(info);
/*
* Some devices don't reliably have _HIDs & _CIDs, so add
* synthetic HIDs to make sure drivers can find them.
*/
if (acpi_is_video_device(device))
acpi_add_id(device, ACPI_VIDEO_HID);
else if (ACPI_SUCCESS(acpi_bay_match(device)))
acpi_add_id(device, ACPI_BAY_HID);
else if (ACPI_SUCCESS(acpi_dock_match(device)))
acpi_add_id(device, ACPI_DOCK_HID);
else if (!acpi_ibm_smbus_match(device))
acpi_add_id(device, ACPI_SMBUS_IBM_HID);
else if (list_empty(&device->pnp.ids) &&
ACPI_IS_ROOT_DEVICE(device->parent)) {
acpi_add_id(device, ACPI_BUS_HID); /* \_SB, LNXSYBUS */
strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
}
break;
case ACPI_BUS_TYPE_POWER:
acpi_add_id(device, ACPI_POWER_HID);
break;
case ACPI_BUS_TYPE_PROCESSOR:
acpi_add_id(device, ACPI_PROCESSOR_OBJECT_HID);
break;
case ACPI_BUS_TYPE_THERMAL:
acpi_add_id(device, ACPI_THERMAL_HID);
break;
case ACPI_BUS_TYPE_POWER_BUTTON:
acpi_add_id(device, ACPI_BUTTON_HID_POWERF);
break;
case ACPI_BUS_TYPE_SLEEP_BUTTON:
acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
break;
}
}
void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
int type, unsigned long long sta)
{
INIT_LIST_HEAD(&device->pnp.ids);
device->device_type = type;
device->handle = handle;
device->parent = acpi_bus_get_parent(handle);
STRUCT_TO_INT(device->status) = sta;
acpi_device_get_busid(device);
acpi_device_set_id(device);
acpi_bus_get_flags(device);
device->flags.match_driver = false;
device_initialize(&device->dev);
dev_set_uevent_suppress(&device->dev, true);
}
void acpi_device_add_finalize(struct acpi_device *device)
{
device->flags.match_driver = true;
dev_set_uevent_suppress(&device->dev, false);
kobject_uevent(&device->dev.kobj, KOBJ_ADD);
}
static int acpi_add_single_object(struct acpi_device **child,
acpi_handle handle, int type,
unsigned long long sta)
{
int result;
struct acpi_device *device;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
printk(KERN_ERR PREFIX "Memory allocation error\n");
return -ENOMEM;
}
acpi_init_device_object(device, handle, type, sta);
acpi_bus_get_power_flags(device);
acpi_bus_get_wakeup_device_flags(device);
result = acpi_device_add(device, acpi_device_release);
if (result) {
acpi_device_release(&device->dev);
return result;
}
acpi_power_add_remove_device(device, true);
acpi_device_add_finalize(device);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Added %s [%s] parent %s\n",
dev_name(&device->dev), (char *) buffer.pointer,
device->parent ? dev_name(&device->parent->dev) : "(null)"));
kfree(buffer.pointer);
*child = device;
return 0;
}
static int acpi_bus_type_and_status(acpi_handle handle, int *type,
unsigned long long *sta)
{
acpi_status status;
acpi_object_type acpi_type;
status = acpi_get_type(handle, &acpi_type);
if (ACPI_FAILURE(status))
return -ENODEV;
switch (acpi_type) {
case ACPI_TYPE_ANY: /* for ACPI_ROOT_OBJECT */
case ACPI_TYPE_DEVICE:
*type = ACPI_BUS_TYPE_DEVICE;
status = acpi_bus_get_status_handle(handle, sta);
if (ACPI_FAILURE(status))
return -ENODEV;
break;
case ACPI_TYPE_PROCESSOR:
*type = ACPI_BUS_TYPE_PROCESSOR;
status = acpi_bus_get_status_handle(handle, sta);
if (ACPI_FAILURE(status))
return -ENODEV;
break;
case ACPI_TYPE_THERMAL:
*type = ACPI_BUS_TYPE_THERMAL;
*sta = ACPI_STA_DEFAULT;
break;
case ACPI_TYPE_POWER:
*type = ACPI_BUS_TYPE_POWER;
*sta = ACPI_STA_DEFAULT;
break;
default:
return -ENODEV;
}
return 0;
}
static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **return_value)
{
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
struct acpi_device *device = NULL;
int type;
unsigned long long sta;
acpi_status status;
int result;
acpi_bus_get_device(handle, &device);
if (device)
goto out;
result = acpi_bus_type_and_status(handle, &type, &sta);
if (result)
return AE_OK;
if (type == ACPI_BUS_TYPE_POWER) {
acpi_add_power_resource(handle);
return AE_OK;
}
if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
!(sta & ACPI_STA_DEVICE_FUNCTIONING)) {
struct acpi_device_wakeup wakeup;
acpi_handle temp;
status = acpi_get_handle(handle, "_PRW", &temp);
if (ACPI_SUCCESS(status)) {
acpi_bus_extract_wakeup_device_power_package(handle,
&wakeup);
acpi_power_resources_list_free(&wakeup.resources);
}
return AE_CTRL_DEPTH;
}
acpi_add_single_object(&device, handle, type, sta);
if (!device)
return AE_CTRL_DEPTH;
out:
if (!*return_value)
*return_value = device;
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
return AE_OK;
}
static int acpi_scan_attach_handler(struct acpi_device *device)
{
struct acpi_scan_handler *handler;
int ret = 0;
list_for_each_entry(handler, &acpi_scan_handlers_list, list_node) {
const struct acpi_device_id *id;
id = __acpi_match_device(device, handler->ids);
if (!id)
continue;
ret = handler->attach(device, id);
if (ret > 0) {
device->handler = handler;
break;
} else if (ret < 0) {
break;
}
}
return ret;
}
static acpi_status acpi_bus_device_attach(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **ret_not_used)
{
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
struct acpi_device *device;
unsigned long long sta_not_used;
int ret;
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
/*
* Ignore errors ignored by acpi_bus_check_add() to avoid terminating
* namespace walks prematurely.
*/
if (acpi_bus_type_and_status(handle, &ret, &sta_not_used))
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
return AE_OK;
ACPI: Separate adding ACPI device objects from probing ACPI drivers Split the ACPI namespace scanning for devices into two passes, such that struct acpi_device objects are registerd in the first pass without probing ACPI drivers and the drivers are probed against them directly in the second pass. There are two main reasons for doing that. First, the ACPI PCI root bridge driver's .add() routine, acpi_pci_root_add(), causes struct pci_dev objects to be created for all PCI devices under the given root bridge. Usually, there are corresponding ACPI device nodes in the ACPI namespace for some of those devices and therefore there should be "companion" struct acpi_device objects to attach those struct pci_dev objects to. These struct acpi_device objects should exist when the corresponding struct pci_dev objects are created, but that is only guaranteed during boot and not during hotplug. This leads to a number of functional differences between the boot and the hotplug cases which are not strictly necessary and make the code more complicated. For example, this forces the ACPI PCI root bridge driver to defer the registration of the just created struct pci_dev objects and to use a special .start() callback routine, acpi_pci_root_start(), to make sure that all of the "companion" struct acpi_device objects will be present at PCI devices registration time during hotplug. If those differences can be eliminated, we will be able to consolidate the boot and hotplug code paths for the enumeration and registration of PCI devices and to reduce the complexity of that code quite a bit. The second reason is that, in general, it should be possible to resolve conflicts of resources assigned by the BIOS to different devices represented by ACPI namespace nodes before any drivers bind to them and before they are attached to "companion" objects representing physical devices (such as struct pci_dev). However, for this purpose we first need to enumerate all ACPI device nodes in the given namespace scope. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-20 23:36:39 +00:00
if (acpi_bus_get_device(handle, &device))
return AE_CTRL_DEPTH;
ret = acpi_scan_attach_handler(device);
if (ret)
return ret > 0 ? AE_OK : AE_CTRL_DEPTH;
ret = device_attach(&device->dev);
return ret >= 0 ? AE_OK : AE_CTRL_DEPTH;
}
/**
* acpi_bus_scan - Add ACPI device node objects in a given namespace scope.
* @handle: Root of the namespace scope to scan.
*
* Scan a given ACPI tree (probably recently hot-plugged) and create and add
* found devices.
*
* If no devices were found, -ENODEV is returned, but it does not mean that
* there has been a real error. There just have been no suitable ACPI objects
* in the table trunk from which the kernel could create a device and add an
* appropriate driver.
*/
int acpi_bus_scan(acpi_handle handle)
{
void *device = NULL;
int error = 0;
mutex_lock(&acpi_scan_lock);
if (ACPI_SUCCESS(acpi_bus_check_add(handle, 0, NULL, &device)))
acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
acpi_bus_check_add, NULL, NULL, &device);
if (!device)
error = -ENODEV;
else if (ACPI_SUCCESS(acpi_bus_device_attach(handle, 0, NULL, NULL)))
acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
acpi_bus_device_attach, NULL, NULL, NULL);
mutex_unlock(&acpi_scan_lock);
return error;
}
EXPORT_SYMBOL(acpi_bus_scan);
static acpi_status acpi_bus_device_detach(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **ret_not_used)
{
struct acpi_device *device = NULL;
if (!acpi_bus_get_device(handle, &device)) {
struct acpi_scan_handler *dev_handler = device->handler;
device->removal_type = ACPI_BUS_REMOVAL_EJECT;
if (dev_handler) {
if (dev_handler->detach)
dev_handler->detach(device);
device->handler = NULL;
} else {
device_release_driver(&device->dev);
}
}
return AE_OK;
}
static acpi_status acpi_bus_remove(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **ret_not_used)
{
struct acpi_device *device = NULL;
if (!acpi_bus_get_device(handle, &device))
acpi_device_unregister(device);
return AE_OK;
}
void acpi_bus_trim(struct acpi_device *start)
{
mutex_lock(&acpi_scan_lock);
/*
* Execute acpi_bus_device_detach() as a post-order callback to detach
* all ACPI drivers from the device nodes being removed.
*/
acpi_walk_namespace(ACPI_TYPE_ANY, start->handle, ACPI_UINT32_MAX, NULL,
acpi_bus_device_detach, NULL, NULL);
acpi_bus_device_detach(start->handle, 0, NULL, NULL);
/*
* Execute acpi_bus_remove() as a post-order callback to remove device
* nodes in the given namespace scope.
*/
acpi_walk_namespace(ACPI_TYPE_ANY, start->handle, ACPI_UINT32_MAX, NULL,
acpi_bus_remove, NULL, NULL);
acpi_bus_remove(start->handle, 0, NULL, NULL);
mutex_unlock(&acpi_scan_lock);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
static int acpi_bus_scan_fixed(void)
{
int result = 0;
/*
* Enumerate all fixed-feature devices.
*/
if (!(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
struct acpi_device *device = NULL;
result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_POWER_BUTTON,
ACPI_STA_DEFAULT);
if (result)
return result;
result = device_attach(&device->dev);
if (result < 0)
return result;
device_init_wakeup(&device->dev, true);
}
if (!(acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON)) {
struct acpi_device *device = NULL;
result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_SLEEP_BUTTON,
ACPI_STA_DEFAULT);
if (result)
return result;
result = device_attach(&device->dev);
}
return result < 0 ? result : 0;
}
int __init acpi_scan_init(void)
{
int result;
result = bus_register(&acpi_bus_type);
if (result) {
/* We don't want to quit even if we failed to add suspend/resume */
printk(KERN_ERR PREFIX "Could not register bus type\n");
}
acpi_pci_root_init();
acpi_pci_link_init();
acpi_platform_init();
acpi_csrt_init();
/*
* Enumerate devices in the ACPI namespace.
*/
result = acpi_bus_scan(ACPI_ROOT_OBJECT);
if (result)
return result;
result = acpi_bus_get_device(ACPI_ROOT_OBJECT, &acpi_root);
if (result)
return result;
result = acpi_bus_scan_fixed();
if (result) {
acpi_device_unregister(acpi_root);
return result;
}
acpi_update_all_gpes();
return 0;
}