2013-07-24 04:41:45 +00:00
|
|
|
/*
|
|
|
|
* Samsung's Exynos4412 based Trats 2 board device tree source
|
|
|
|
*
|
|
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
|
|
* http://www.samsung.com
|
|
|
|
*
|
|
|
|
* Device tree source file for Samsung's Trats 2 board which is based on
|
|
|
|
* Samsung's Exynos4412 SoC.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
#include "exynos4412.dtsi"
|
2014-09-23 16:22:49 +00:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
2013-07-24 04:41:45 +00:00
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Samsung Trats 2 based on Exynos4412";
|
2014-03-20 17:17:22 +00:00
|
|
|
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
|
2013-07-24 04:41:45 +00:00
|
|
|
|
2013-08-05 17:49:44 +00:00
|
|
|
aliases {
|
2014-05-08 20:58:59 +00:00
|
|
|
i2c9 = &i2c_ak8975;
|
2014-05-21 22:56:53 +00:00
|
|
|
i2c10 = &i2c_cm36651;
|
2014-09-23 16:22:49 +00:00
|
|
|
i2c11 = &i2c_max77693;
|
2013-08-05 17:49:44 +00:00
|
|
|
};
|
|
|
|
|
2013-07-24 04:41:45 +00:00
|
|
|
memory {
|
|
|
|
reg = <0x40000000 0x40000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
|
|
|
};
|
|
|
|
|
|
|
|
firmware@0204F000 {
|
|
|
|
compatible = "samsung,secure-firmware";
|
|
|
|
reg = <0x0204F000 0x1000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
fixed-rate-clocks {
|
|
|
|
xxti {
|
|
|
|
compatible = "samsung,clock-xxti", "fixed-clock";
|
|
|
|
clock-frequency = <0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
xusbxti {
|
|
|
|
compatible = "samsung,clock-xusbxti", "fixed-clock";
|
|
|
|
clock-frequency = <24000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
vemmc_reg: regulator-0 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VMEM_VDD_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
gpio = <&gpk0 2 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
|
2013-08-05 17:49:44 +00:00
|
|
|
cam_io_reg: voltage-regulator-1 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "CAM_SENSOR_A";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
gpio = <&gpm0 2 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
|
2014-03-28 11:52:45 +00:00
|
|
|
lcd_vdd3_reg: voltage-regulator-2 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "LCD_VDD_2.2V";
|
|
|
|
regulator-min-microvolt = <2200000>;
|
|
|
|
regulator-max-microvolt = <2200000>;
|
|
|
|
gpio = <&gpc0 1 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
|
2014-05-08 21:01:40 +00:00
|
|
|
cam_af_reg: voltage-regulator-3 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "CAM_AF";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
gpio = <&gpm0 4 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
|
|
|
|
cam_isp_core_reg: voltage-regulator-4 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "CAM_ISP_CORE_1.2V_EN";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
gpio = <&gpm0 3 0>;
|
|
|
|
enable-active-high;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
2014-05-21 22:56:53 +00:00
|
|
|
|
|
|
|
ps_als_reg: voltage-regulator-5 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "LED_A_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
gpio = <&gpj0 5 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
2013-07-24 04:41:45 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
gpio-keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
key-down {
|
2014-05-21 22:57:39 +00:00
|
|
|
gpios = <&gpx3 3 1>;
|
2013-07-24 04:41:45 +00:00
|
|
|
linux,code = <114>;
|
|
|
|
label = "volume down";
|
|
|
|
debounce-interval = <10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
key-up {
|
2014-05-21 22:57:39 +00:00
|
|
|
gpios = <&gpx2 2 1>;
|
2013-07-24 04:41:45 +00:00
|
|
|
linux,code = <115>;
|
|
|
|
label = "volume up";
|
|
|
|
debounce-interval = <10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
key-power {
|
|
|
|
gpios = <&gpx2 7 1>;
|
|
|
|
linux,code = <116>;
|
|
|
|
label = "power";
|
|
|
|
debounce-interval = <10>;
|
|
|
|
gpio-key,wakeup;
|
|
|
|
};
|
2014-05-21 22:57:39 +00:00
|
|
|
|
|
|
|
key-ok {
|
|
|
|
gpios = <&gpx0 1 1>;
|
|
|
|
linux,code = <139>;
|
|
|
|
label = "ok";
|
|
|
|
debounce-inteval = <10>;
|
|
|
|
gpio-key,wakeup;
|
|
|
|
};
|
2013-07-24 04:41:45 +00:00
|
|
|
};
|
|
|
|
|
2014-03-17 21:25:59 +00:00
|
|
|
adc: adc@126C0000 {
|
|
|
|
vdd-supply = <&ldo3_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-07-24 04:41:45 +00:00
|
|
|
i2c@13890000 {
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
mms114-touchscreen@48 {
|
|
|
|
compatible = "melfas,mms114";
|
|
|
|
reg = <0x48>;
|
|
|
|
interrupt-parent = <&gpm2>;
|
|
|
|
interrupts = <3 2>;
|
|
|
|
x-size = <720>;
|
|
|
|
y-size = <1280>;
|
|
|
|
avdd-supply = <&ldo23_reg>;
|
|
|
|
vdd-supply = <&ldo24_reg>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-05-08 21:01:40 +00:00
|
|
|
i2c_0: i2c@13860000 {
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
s5c73m3@3c {
|
|
|
|
compatible = "samsung,s5c73m3";
|
|
|
|
reg = <0x3c>;
|
|
|
|
standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
|
|
|
|
xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
|
|
|
|
vdd-int-supply = <&buck9_reg>;
|
|
|
|
vddio-cis-supply = <&ldo9_reg>;
|
|
|
|
vdda-supply = <&ldo17_reg>;
|
|
|
|
vddio-host-supply = <&ldo18_reg>;
|
|
|
|
vdd-af-supply = <&cam_af_reg>;
|
|
|
|
vdd-reg-supply = <&cam_io_reg>;
|
|
|
|
clock-frequency = <24000000>;
|
|
|
|
/* CAM_A_CLKOUT */
|
|
|
|
clocks = <&camera 0>;
|
|
|
|
clock-names = "cis_extclk";
|
|
|
|
port {
|
|
|
|
s5c73m3_ep: endpoint {
|
|
|
|
remote-endpoint = <&csis0_ep>;
|
|
|
|
data-lanes = <1 2 3 4>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-07-24 04:41:45 +00:00
|
|
|
i2c@138D0000 {
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
|
|
pinctrl-0 = <&i2c7_bus>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
max77686_pmic@09 {
|
|
|
|
compatible = "maxim,max77686";
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
|
|
interrupts = <7 0>;
|
|
|
|
reg = <0x09>;
|
2013-12-12 16:07:21 +00:00
|
|
|
#clock-cells = <1>;
|
2013-07-24 04:41:45 +00:00
|
|
|
|
|
|
|
voltage-regulators {
|
|
|
|
ldo1_reg: ldo1 {
|
|
|
|
regulator-compatible = "LDO1";
|
|
|
|
regulator-name = "VALIVE_1.0V_AP";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo2_reg: ldo2 {
|
|
|
|
regulator-compatible = "LDO2";
|
|
|
|
regulator-name = "VM1M2_1.2V_AP";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo3_reg: ldo3 {
|
|
|
|
regulator-compatible = "LDO3";
|
|
|
|
regulator-name = "VCC_1.8V_AP";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo4_reg: ldo4 {
|
|
|
|
regulator-compatible = "LDO4";
|
|
|
|
regulator-name = "VCC_2.8V_AP";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo5_reg: ldo5 {
|
|
|
|
regulator-compatible = "LDO5";
|
|
|
|
regulator-name = "VCC_1.8V_IO";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo6_reg: ldo6 {
|
|
|
|
regulator-compatible = "LDO6";
|
|
|
|
regulator-name = "VMPLL_1.0V_AP";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo7_reg: ldo7 {
|
|
|
|
regulator-compatible = "LDO7";
|
|
|
|
regulator-name = "VPLL_1.0V_AP";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo8_reg: ldo8 {
|
|
|
|
regulator-compatible = "LDO8";
|
|
|
|
regulator-name = "VMIPI_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo9_reg: ldo9 {
|
|
|
|
regulator-compatible = "LDO9";
|
|
|
|
regulator-name = "CAM_ISP_MIPI_1.2V";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo10_reg: ldo10 {
|
|
|
|
regulator-compatible = "LDO10";
|
|
|
|
regulator-name = "VMIPI_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo11_reg: ldo11 {
|
|
|
|
regulator-compatible = "LDO11";
|
|
|
|
regulator-name = "VABB1_1.95V";
|
|
|
|
regulator-min-microvolt = <1950000>;
|
|
|
|
regulator-max-microvolt = <1950000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo12_reg: ldo12 {
|
|
|
|
regulator-compatible = "LDO12";
|
|
|
|
regulator-name = "VUOTG_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo13_reg: ldo13 {
|
|
|
|
regulator-compatible = "LDO13";
|
|
|
|
regulator-name = "NFC_AVDD_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo14_reg: ldo14 {
|
|
|
|
regulator-compatible = "LDO14";
|
|
|
|
regulator-name = "VABB2_1.95V";
|
|
|
|
regulator-min-microvolt = <1950000>;
|
|
|
|
regulator-max-microvolt = <1950000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo15_reg: ldo15 {
|
|
|
|
regulator-compatible = "LDO15";
|
|
|
|
regulator-name = "VHSIC_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo16_reg: ldo16 {
|
|
|
|
regulator-compatible = "LDO16";
|
|
|
|
regulator-name = "VHSIC_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo17_reg: ldo17 {
|
|
|
|
regulator-compatible = "LDO17";
|
|
|
|
regulator-name = "CAM_SENSOR_CORE_1.2V";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo18_reg: ldo18 {
|
|
|
|
regulator-compatible = "LDO18";
|
|
|
|
regulator-name = "CAM_ISP_SEN_IO_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo19_reg: ldo19 {
|
|
|
|
regulator-compatible = "LDO19";
|
|
|
|
regulator-name = "VT_CAM_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo20_reg: ldo20 {
|
|
|
|
regulator-compatible = "LDO20";
|
|
|
|
regulator-name = "VDDQ_PRE_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo21_reg: ldo21 {
|
|
|
|
regulator-compatible = "LDO21";
|
|
|
|
regulator-name = "VTF_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo22_reg: ldo22 {
|
|
|
|
regulator-compatible = "LDO22";
|
|
|
|
regulator-name = "VMEM_VDD_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo23_reg: ldo23 {
|
|
|
|
regulator-compatible = "LDO23";
|
|
|
|
regulator-name = "TSP_AVDD_3.3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo24_reg: ldo24 {
|
|
|
|
regulator-compatible = "LDO24";
|
|
|
|
regulator-name = "TSP_VDD_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo25_reg: ldo25 {
|
|
|
|
regulator-compatible = "LDO25";
|
|
|
|
regulator-name = "LCD_VCC_3.3V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo26_reg: ldo26 {
|
|
|
|
regulator-compatible = "LDO26";
|
|
|
|
regulator-name = "MOTOR_VCC_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-mem-idle;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck1_reg: buck1 {
|
|
|
|
regulator-compatible = "BUCK1";
|
|
|
|
regulator-name = "vdd_mif";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck2_reg: buck2 {
|
|
|
|
regulator-compatible = "BUCK2";
|
|
|
|
regulator-name = "vdd_arm";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck3_reg: buck3 {
|
|
|
|
regulator-compatible = "BUCK3";
|
|
|
|
regulator-name = "vdd_int";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1150000>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck4_reg: buck4 {
|
|
|
|
regulator-compatible = "BUCK4";
|
|
|
|
regulator-name = "vdd_g3d";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1150000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck5_reg: buck5 {
|
|
|
|
regulator-compatible = "BUCK5";
|
|
|
|
regulator-name = "VMEM_1.2V_AP";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck6_reg: buck6 {
|
|
|
|
regulator-compatible = "BUCK6";
|
|
|
|
regulator-name = "VCC_SUB_1.35V";
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck7_reg: buck7 {
|
|
|
|
regulator-compatible = "BUCK7";
|
|
|
|
regulator-name = "VCC_SUB_2.0V";
|
|
|
|
regulator-min-microvolt = <2000000>;
|
|
|
|
regulator-max-microvolt = <2000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck8_reg: buck8 {
|
|
|
|
regulator-compatible = "BUCK8";
|
|
|
|
regulator-name = "VMEM_VDDF_3.0V";
|
|
|
|
regulator-min-microvolt = <2850000>;
|
|
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck9_reg: buck9 {
|
|
|
|
regulator-compatible = "BUCK9";
|
|
|
|
regulator-name = "CAM_ISP_CORE_1.2V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-mem-off;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-09-23 16:22:49 +00:00
|
|
|
i2c_max77693: i2c-gpio-1 {
|
|
|
|
compatible = "i2c-gpio";
|
|
|
|
gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
i2c-gpio,delay-us = <2>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
max77693@66 {
|
|
|
|
compatible = "maxim,max77693";
|
|
|
|
interrupt-parent = <&gpx1>;
|
|
|
|
interrupts = <5 2>;
|
|
|
|
reg = <0x66>;
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
esafeout1_reg: ESAFEOUT1@1 {
|
|
|
|
regulator-name = "ESAFEOUT1";
|
|
|
|
};
|
|
|
|
esafeout2_reg: ESAFEOUT2@2 {
|
|
|
|
regulator-name = "ESAFEOUT2";
|
|
|
|
};
|
|
|
|
charger_reg: CHARGER@0 {
|
|
|
|
regulator-name = "CHARGER";
|
|
|
|
regulator-min-microamp = <60000>;
|
|
|
|
regulator-max-microamp = <2580000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-12-20 22:38:19 +00:00
|
|
|
mmc@12550000 {
|
|
|
|
num-slots = <1>;
|
|
|
|
broken-cd;
|
2013-07-24 04:41:45 +00:00
|
|
|
non-removable;
|
2013-12-20 22:38:19 +00:00
|
|
|
card-detect-delay = <200>;
|
2013-07-24 04:41:45 +00:00
|
|
|
vmmc-supply = <&vemmc_reg>;
|
2013-12-20 22:38:19 +00:00
|
|
|
clock-frequency = <400000000>;
|
|
|
|
samsung,dw-mshc-ciu-div = <0>;
|
|
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
|
|
pinctrl-names = "default";
|
2013-07-24 04:41:45 +00:00
|
|
|
status = "okay";
|
2014-08-18 16:55:32 +00:00
|
|
|
bus-width = <8>;
|
|
|
|
cap-mmc-highspeed;
|
2013-07-24 04:41:45 +00:00
|
|
|
};
|
|
|
|
|
2014-11-06 23:22:49 +00:00
|
|
|
sdhci@12530000 {
|
|
|
|
bus-width = <4>;
|
|
|
|
cd-gpios = <&gpx3 4 0>;
|
|
|
|
cd-inverted;
|
|
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
vmmc-supply = <&ldo21_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-07-24 04:41:45 +00:00
|
|
|
serial@13800000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
serial@13810000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
serial@13820000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
serial@13830000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
2013-08-05 17:49:44 +00:00
|
|
|
|
2014-11-22 13:58:09 +00:00
|
|
|
tmu@100C0000 {
|
|
|
|
vtmu-supply = <&ldo10_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-08-05 17:49:44 +00:00
|
|
|
i2c_ak8975: i2c-gpio-0 {
|
|
|
|
compatible = "i2c-gpio";
|
|
|
|
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
|
|
|
|
i2c-gpio,delay-us = <2>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
ak8975@0c {
|
2014-05-19 16:12:50 +00:00
|
|
|
compatible = "asahi-kasei,ak8975";
|
2013-08-05 17:49:44 +00:00
|
|
|
reg = <0x0c>;
|
|
|
|
gpios = <&gpj0 7 0>;
|
|
|
|
};
|
|
|
|
};
|
2013-08-05 17:49:44 +00:00
|
|
|
|
2014-05-21 22:56:53 +00:00
|
|
|
i2c_cm36651: i2c-gpio-2 {
|
|
|
|
compatible = "i2c-gpio";
|
|
|
|
gpios = <&gpf0 0 1>, <&gpf0 1 1>;
|
|
|
|
i2c-gpio,delay-us = <2>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
cm36651@18 {
|
|
|
|
compatible = "capella,cm36651";
|
|
|
|
reg = <0x18>;
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
|
|
interrupts = <2 2>;
|
|
|
|
vled-supply = <&ps_als_reg>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-08-05 17:49:45 +00:00
|
|
|
spi_1: spi@13930000 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&spi1_bus>;
|
2014-07-16 15:19:10 +00:00
|
|
|
cs-gpios = <&gpb 5 0>;
|
2013-08-05 17:49:45 +00:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
s5c73m3_spi: s5c73m3 {
|
|
|
|
compatible = "samsung,s5c73m3";
|
|
|
|
spi-max-frequency = <50000000>;
|
|
|
|
reg = <0>;
|
|
|
|
controller-data {
|
|
|
|
samsung,spi-feedback-delay = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-03-28 11:52:45 +00:00
|
|
|
dsi_0: dsi@11C80000 {
|
|
|
|
vddcore-supply = <&ldo8_reg>;
|
|
|
|
vddio-supply = <&ldo10_reg>;
|
|
|
|
samsung,pll-clock-frequency = <24000000>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
ports {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
reg = <1>;
|
|
|
|
|
|
|
|
dsi_out: endpoint {
|
|
|
|
remote-endpoint = <&dsi_in>;
|
|
|
|
samsung,burst-clock-frequency = <500000000>;
|
|
|
|
samsung,esc-clock-frequency = <20000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
panel@0 {
|
|
|
|
compatible = "samsung,s6e8aa0";
|
|
|
|
reg = <0>;
|
|
|
|
vdd3-supply = <&lcd_vdd3_reg>;
|
|
|
|
vci-supply = <&ldo25_reg>;
|
|
|
|
reset-gpios = <&gpy4 5 0>;
|
|
|
|
power-on-delay= <50>;
|
|
|
|
reset-delay = <100>;
|
|
|
|
init-delay = <100>;
|
|
|
|
flip-horizontal;
|
|
|
|
flip-vertical;
|
|
|
|
panel-width-mm = <58>;
|
|
|
|
panel-height-mm = <103>;
|
|
|
|
|
|
|
|
display-timings {
|
|
|
|
timing-0 {
|
|
|
|
clock-frequency = <0>;
|
|
|
|
hactive = <720>;
|
|
|
|
vactive = <1280>;
|
|
|
|
hfront-porch = <5>;
|
|
|
|
hback-porch = <5>;
|
|
|
|
hsync-len = <5>;
|
|
|
|
vfront-porch = <13>;
|
|
|
|
vback-porch = <1>;
|
|
|
|
vsync-len = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
port {
|
|
|
|
dsi_in: endpoint {
|
|
|
|
remote-endpoint = <&dsi_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-03-28 11:52:47 +00:00
|
|
|
fimd@11c00000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-05-08 21:01:40 +00:00
|
|
|
camera: camera {
|
|
|
|
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
|
2013-08-05 17:49:44 +00:00
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
fimc_0: fimc@11800000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc_1: fimc@11810000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc_2: fimc@11820000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc_3: fimc@11830000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-05-08 21:01:40 +00:00
|
|
|
csis_0: csis@11880000 {
|
|
|
|
status = "okay";
|
|
|
|
vddcore-supply = <&ldo8_reg>;
|
|
|
|
vddio-supply = <&ldo10_reg>;
|
|
|
|
clock-frequency = <176000000>;
|
|
|
|
|
|
|
|
/* Camera C (3) MIPI CSI-2 (CSIS0) */
|
|
|
|
port@3 {
|
|
|
|
reg = <3>;
|
|
|
|
csis0_ep: endpoint {
|
|
|
|
remote-endpoint = <&s5c73m3_ep>;
|
|
|
|
data-lanes = <1 2 3 4>;
|
|
|
|
samsung,csis-hs-settle = <12>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-08-05 17:49:44 +00:00
|
|
|
csis_1: csis@11890000 {
|
|
|
|
vddcore-supply = <&ldo8_reg>;
|
|
|
|
vddio-supply = <&ldo10_reg>;
|
|
|
|
clock-frequency = <160000000>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
/* Camera D (4) MIPI CSI-2 (CSIS1) */
|
|
|
|
port@4 {
|
|
|
|
reg = <4>;
|
|
|
|
csis1_ep: endpoint {
|
|
|
|
remote-endpoint = <&is_s5k6a3_ep>;
|
|
|
|
data-lanes = <1>;
|
|
|
|
samsung,csis-hs-settle = <18>;
|
|
|
|
samsung,csis-wclk;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc_lite_0: fimc-lite@12390000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc_lite_1: fimc-lite@123A0000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
fimc-is@12000000 {
|
|
|
|
pinctrl-0 = <&fimc_is_uart>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
i2c1_isp: i2c-isp@12140000 {
|
|
|
|
pinctrl-0 = <&fimc_is_i2c1>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
|
|
|
s5k6a3@10 {
|
|
|
|
compatible = "samsung,s5k6a3";
|
|
|
|
reg = <0x10>;
|
|
|
|
svdda-supply = <&cam_io_reg>;
|
|
|
|
svddio-supply = <&ldo19_reg>;
|
2014-05-08 21:00:35 +00:00
|
|
|
afvdd-supply = <&ldo19_reg>;
|
2013-08-05 17:49:44 +00:00
|
|
|
clock-frequency = <24000000>;
|
|
|
|
/* CAM_B_CLKOUT */
|
2014-05-08 21:00:35 +00:00
|
|
|
clocks = <&camera 1>;
|
|
|
|
clock-names = "extclk";
|
2013-08-05 17:49:44 +00:00
|
|
|
samsung,camclk-out = <1>;
|
|
|
|
gpios = <&gpm1 6 0>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
is_s5k6a3_ep: endpoint {
|
|
|
|
remote-endpoint = <&csis1_ep>;
|
|
|
|
data-lanes = <1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2014-03-17 21:25:59 +00:00
|
|
|
|
2014-05-22 18:30:21 +00:00
|
|
|
exynos-usbphy@125B0000 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
hsotg@12480000 {
|
|
|
|
vusb_d-supply = <&ldo15_reg>;
|
|
|
|
vusb_a-supply = <&ldo12_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-03-17 21:25:59 +00:00
|
|
|
thermistor-ap@0 {
|
|
|
|
compatible = "ntc,ncp15wb473";
|
|
|
|
pullup-uv = <1800000>; /* VCC_1.8V_AP */
|
|
|
|
pullup-ohm = <100000>; /* 100K */
|
|
|
|
pulldown-ohm = <100000>; /* 100K */
|
|
|
|
io-channels = <&adc 1>; /* AP temperature */
|
|
|
|
};
|
|
|
|
|
|
|
|
thermistor-battery@1 {
|
|
|
|
compatible = "ntc,ncp15wb473";
|
|
|
|
pullup-uv = <1800000>; /* VCC_1.8V_AP */
|
|
|
|
pullup-ohm = <100000>; /* 100K */
|
|
|
|
pulldown-ohm = <100000>; /* 100K */
|
|
|
|
io-channels = <&adc 2>; /* Battery temperature */
|
|
|
|
};
|
2013-07-24 04:41:45 +00:00
|
|
|
};
|
2014-09-23 16:20:03 +00:00
|
|
|
|
|
|
|
&pinctrl_0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sleep0>;
|
|
|
|
|
|
|
|
sleep0: sleep-states {
|
|
|
|
PIN_SLP(gpa0-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpa0-1, OUT0, NONE);
|
|
|
|
PIN_SLP(gpa0-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpa0-3, INPUT, UP);
|
|
|
|
PIN_SLP(gpa0-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpa0-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa0-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa0-7, INPUT, UP);
|
|
|
|
|
|
|
|
PIN_SLP(gpa1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-5, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpb-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpb-1, INPUT, NONE);
|
|
|
|
PIN_SLP(gpb-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpb-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpb-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpb-5, INPUT, UP);
|
|
|
|
PIN_SLP(gpb-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpb-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpc0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc0-4, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpc1-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpc1-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpc1-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpc1-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpc1-4, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpd0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpd0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpd0-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpd0-3, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpd1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpd1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpd1-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpd1-3, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpf0-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf0-1, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf0-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf0-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf0-6, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf0-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpf1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf1-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf1-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf1-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf1-5, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf1-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf1-7, PREV, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpf2-0, PREV, NONE);
|
|
|
|
PIN_SLP(gpf2-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf2-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf2-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf2-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf2-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpf2-6, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf2-7, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpf3-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpf3-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpf3-2, PREV, NONE);
|
|
|
|
PIN_SLP(gpf3-3, PREV, NONE);
|
|
|
|
PIN_SLP(gpf3-4, OUT1, NONE);
|
|
|
|
PIN_SLP(gpf3-5, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpj0-0, PREV, NONE);
|
|
|
|
PIN_SLP(gpj0-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpj0-2, PREV, NONE);
|
|
|
|
PIN_SLP(gpj0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpj0-4, PREV, NONE);
|
|
|
|
PIN_SLP(gpj0-5, PREV, NONE);
|
|
|
|
PIN_SLP(gpj0-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpj0-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpj1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpj1-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpj1-2, PREV, NONE);
|
|
|
|
PIN_SLP(gpj1-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpj1-4, INPUT, DOWN);
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pinctrl_1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sleep1>;
|
|
|
|
|
|
|
|
sleep1: sleep-states {
|
|
|
|
PIN_SLP(gpk0-0, PREV, NONE);
|
|
|
|
PIN_SLP(gpk0-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpk0-2, OUT0, NONE);
|
|
|
|
PIN_SLP(gpk0-3, PREV, NONE);
|
|
|
|
PIN_SLP(gpk0-4, PREV, NONE);
|
|
|
|
PIN_SLP(gpk0-5, PREV, NONE);
|
|
|
|
PIN_SLP(gpk0-6, PREV, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpk1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk1-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk1-3, PREV, NONE);
|
|
|
|
PIN_SLP(gpk1-4, PREV, NONE);
|
|
|
|
PIN_SLP(gpk1-5, PREV, NONE);
|
|
|
|
PIN_SLP(gpk1-6, PREV, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpk2-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-6, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpk3-0, OUT0, NONE);
|
|
|
|
PIN_SLP(gpk3-1, INPUT, NONE);
|
|
|
|
PIN_SLP(gpk3-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk3-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpk3-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpk3-5, INPUT, NONE);
|
|
|
|
PIN_SLP(gpk3-6, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpl0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl0-4, PREV, NONE);
|
|
|
|
PIN_SLP(gpl0-6, PREV, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpl1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl2-6, PREV, NONE);
|
|
|
|
PIN_SLP(gpl2-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpm0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpm1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm1-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm1-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm1-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm1-5, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm1-6, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpm2-0, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm2-1, INPUT, NONE);
|
|
|
|
PIN_SLP(gpm2-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm2-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm2-4, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpm3-0, PREV, NONE);
|
|
|
|
PIN_SLP(gpm3-1, PREV, NONE);
|
|
|
|
PIN_SLP(gpm3-2, PREV, NONE);
|
|
|
|
PIN_SLP(gpm3-3, OUT1, NONE);
|
|
|
|
PIN_SLP(gpm3-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm3-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm3-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm3-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpm4-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy0-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy0-5, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy1-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy1-3, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy2-0, PREV, NONE);
|
|
|
|
PIN_SLP(gpy2-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy2-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpy2-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpy2-4, INPUT, NONE);
|
|
|
|
PIN_SLP(gpy2-5, INPUT, NONE);
|
|
|
|
|
|
|
|
PIN_SLP(gpy3-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy3-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy4-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy4-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy5-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy5-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpy6-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpy6-7, INPUT, DOWN);
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pinctrl_2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sleep2>;
|
|
|
|
|
|
|
|
sleep2: sleep-states {
|
|
|
|
PIN_SLP(gpz-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpz-6, INPUT, DOWN);
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pinctrl_3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sleep3>;
|
|
|
|
|
|
|
|
sleep3: sleep-states {
|
|
|
|
PIN_SLP(gpv0-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv0-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpv1-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv1-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpv2-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv2-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpv3-0, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-1, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-2, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpv3-7, INPUT, DOWN);
|
|
|
|
|
|
|
|
PIN_SLP(gpv4-0, INPUT, DOWN);
|
|
|
|
};
|
|
|
|
};
|