linux/arch/arm/mach-vexpress/ct-ca9x4.c

219 lines
5.1 KiB
C
Raw Normal View History

/*
* Versatile Express Core Tile Cortex A9x4 Support
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clkdev.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <mach/ct-ca9x4.h>
#include <asm/hardware/timer-sp.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "core.h"
#include <mach/motherboard.h>
#include <mach/irqs.h>
#include <plat/clcd.h>
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
.virtual = V2T_PERIPH,
.pfn = __phys_to_pfn(CT_CA9X4_MPIC),
.length = SZ_8K,
.type = MT_DEVICE,
},
};
static void __init ct_ca9x4_map_io(void)
{
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
static void __init ca9x4_twd_init(void)
{
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
#else
#define ca9x4_twd_init() do {} while(0)
#endif
static void __init ct_ca9x4_init_irq(void)
{
gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
ioremap(A9_MPCORE_GIC_CPU, SZ_256));
ca9x4_twd_init();
}
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
u32 site = v2m_get_master_site();
/*
* Old firmware was using the "site" component of the command
* to control the DVI muxer (while it should be always 0 ie. MB).
* Newer firmware uses the data register. Keep both for compatibility.
*/
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
}
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
fb->panel = versatile_clcd_get_panel("XVGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, framesize);
}
static struct clcd_board ct_ca9x4_clcd_data = {
.name = "CT-CA9X4",
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = ct_ca9x4_clcd_enable,
.setup = ct_ca9x4_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
&dmc_device,
&smc_device,
&gpio_device,
};
static struct v2m_osc ct_osc1 = {
.osc = 1,
.rate_min = 10000000,
.rate_max = 80000000,
.rate_default = 23750000,
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_CT_CA9X4_PMU_CPU0,
.end = IRQ_CT_CA9X4_PMU_CPU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_CT_CA9X4_PMU_CPU1,
.end = IRQ_CT_CA9X4_PMU_CPU1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_CT_CA9X4_PMU_CPU2,
.end = IRQ_CT_CA9X4_PMU_CPU2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_CT_CA9X4_PMU_CPU3,
.end = IRQ_CT_CA9X4_PMU_CPU3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
ARM: fix section mismatch warnings in Versatile Express WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init() The function v2m_timer_init() references the function __init sp804_clocksource_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clocksource_init is wrong. WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init() The function v2m_timer_init() references the function __init sp804_clockevents_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clockevents_init is wrong. WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init() The function ct_ca9x4_init() references the function __init l2x0_init(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of l2x0_init is wrong. WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table() The function ct_ca9x4_init() references the function __init clkdev_add_table(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of clkdev_add_table is wrong. WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown) The function ct_ca9x4_init() references the (unknown reference) __initdata (unknown). This is often because ct_ca9x4_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-05 10:29:28 +00:00
static void __init ct_ca9x4_init(void)
{
int i;
struct clk *clk;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
ct_osc1.site = v2m_get_master_site();
clk = v2m_osc_register("ct:osc1", &ct_osc1);
clk_register_clkdev(clk, NULL, "ct:clcd");
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
}
#ifdef CONFIG_SMP
static void *ct_ca9x4_scu_base __initdata;
static void __init ct_ca9x4_init_cpu_map(void)
{
int i, ncores;
ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
if (WARN_ON(!ct_ca9x4_scu_base))
return;
ncores = scu_get_core_count(ct_ca9x4_scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
{
scu_enable(ct_ca9x4_scu_base);
}
#endif
struct ct_desc ct_ca9x4_desc __initdata = {
.id = V2M_CT_ID_CA9,
.name = "CA9x4",
.map_io = ct_ca9x4_map_io,
.init_irq = ct_ca9x4_init_irq,
.init_tile = ct_ca9x4_init,
#ifdef CONFIG_SMP
.init_cpu_map = ct_ca9x4_init_cpu_map,
.smp_enable = ct_ca9x4_smp_enable,
#endif
};