linux/arch/x86/kernel/Makefile

131 lines
4.4 KiB
Makefile
Raw Normal View History

#
# Makefile for the linux kernel.
#
extra-y := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
ifdef CONFIG_FUNCTION_TRACER
# Do not profile debug and lowlevel utilities
CFLAGS_REMOVE_tsc.o = -pg
CFLAGS_REMOVE_rtc.o = -pg
CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
endif
#
# vsyscalls (which work on the user stack) should have
# no stack-protector checks:
#
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp)
CFLAGS_hpet.o := $(nostackp)
CFLAGS_tsc.o := $(nostackp)
CFLAGS_paravirt.o := $(nostackp)
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o
obj-y += setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o
obj-y += bootflag.o e820.o
obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o
obj-y += tsc.o io_delay.o rtc.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
obj-$(CONFIG_X86_DS) += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_X86_SMP) += smp.o
obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o tlb.o
obj-$(CONFIG_X86_32_SMP) += smpcommon.o
obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
ftrace: dynamic enabling/disabling of function calls This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_ES7000) += es7000_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-y += vsmp_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200.o
scx200-y += scx200_32.o
obj-$(CONFIG_OLPC) += olpc.o
microcode-y := microcode_core.o
microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o
microcode-$(CONFIG_MICROCODE_AMD) += microcode_amd.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o # NB rename without _64
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
obj-y += bios_uv.o uv_irq.o uv_sysfs.o
obj-y += genx2apic_cluster.o
obj-y += genx2apic_phys.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu_init.o amd_iommu.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o
endif