linux/drivers/media/test-drivers/vimc/vimc-common.c

401 lines
9.1 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* vimc-common.c Virtual Media Controller Driver
*
* Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include "vimc-common.h"
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
/*
* NOTE: non-bayer formats need to come first (necessary for enum_mbus_code
* in the scaler)
*/
static const struct vimc_pix_map vimc_pix_map_list[] = {
/* TODO: add all missing formats */
/* RGB formats */
{
.code = {
MEDIA_BUS_FMT_BGR888_1X24,
MEDIA_BUS_FMT_BGR888_3X8
},
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_BGR24,
.bpp = 3,
.bayer = false,
},
{
.code = {
MEDIA_BUS_FMT_RGB888_1X24,
MEDIA_BUS_FMT_RGB888_2X12_BE,
MEDIA_BUS_FMT_RGB888_2X12_LE,
MEDIA_BUS_FMT_RGB888_3X8,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
MEDIA_BUS_FMT_RGB888_1X32_PADHI,
MEDIA_BUS_FMT_GBR888_1X24
},
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_RGB24,
.bpp = 3,
.bayer = false,
},
{
.code = { MEDIA_BUS_FMT_ARGB8888_1X32 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_ARGB32,
.bpp = 4,
.bayer = false,
},
/* Bayer formats */
{
.code = { MEDIA_BUS_FMT_SBGGR8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SBGGR8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGBRG8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGBRG8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGRBG8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGRBG8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SRGGB8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SRGGB8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SBGGR10_1X10 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SBGGR10,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGBRG10_1X10 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGBRG10,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGRBG10_1X10 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGRBG10,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SRGGB10_1X10 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SRGGB10,
.bpp = 2,
.bayer = true,
},
/* 10bit raw bayer a-law compressed to 8 bits */
{
.code = { MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SBGGR10ALAW8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGBRG10ALAW8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGRBG10ALAW8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SRGGB10ALAW8,
.bpp = 1,
.bayer = true,
},
/* 10bit raw bayer DPCM compressed to 8 bits */
{
.code = { MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SBGGR10DPCM8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGBRG10DPCM8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SRGGB10DPCM8,
.bpp = 1,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SBGGR12_1X12 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SBGGR12,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGBRG12_1X12 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGBRG12,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SGRBG12_1X12 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SGRBG12,
.bpp = 2,
.bayer = true,
},
{
.code = { MEDIA_BUS_FMT_SRGGB12_1X12 },
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
.pixelformat = V4L2_PIX_FMT_SRGGB12,
.bpp = 2,
.bayer = true,
},
};
media: vimc: upon streaming, check that the pipeline starts with a source entity Userspace can disable links and create pipelines that do not start with a source entity. Trying to stream from such a pipeline should fail with -EPIPE currently this is not handled and cause kernel crash. Reproducing the crash: media-ctl -d0 -l "5:1->21:0[0]" -v v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2 Panic message: [ 39.078841][ T248] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 39.079338][ T248] #PF: supervisor read access in kernel mode [ 39.079704][ T248] #PF: error_code(0x0000) - not-present page [ 39.080071][ T248] PGD 0 P4D 0 [ 39.080279][ T248] Oops: 0000 [#1] SMP PTI [ 39.080546][ T248] CPU: 0 PID: 248 Comm: vimc-streamer t Not tainted 5.4.0-rc1+ #17 [ 39.081030][ T248] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 39.081779][ T248] RIP: 0010:vimc_sca_process_frame+0xdb/0x210 [vimc] [ 39.082191][ T248] Code: 44 8d 0c 28 8b 93 a4 01 00 00 48 8b 8b 98 01 00 00 85 d2 74 40 48 8b 74 24 10 8d 7a ff 4c 01 c9 31 d2 4c 01 fe eb 03 4c 89 c2 <44> 0f b6 04 16 44 88 04 11 4c 8d 42 01 48 39 fa 75 eb 8b 93 a4 01 [ 39.083436][ T248] RSP: 0018:ffffb15a005abe90 EFLAGS: 00010246 [ 39.083808][ T248] RAX: 0000000000000000 RBX: ffffa3fdc46d2e00 RCX: ffffb15a02579000 [ 39.084298][ T248] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [ 39.084792][ T248] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 39.085280][ T248] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 39.085770][ T248] R13: ffffa3fdc46d2ee0 R14: 0000000000000000 R15: 0000000000000000 [ 39.086258][ T248] FS: 0000000000000000(0000) GS:ffffa3fdc7800000(0000) knlGS:0000000000000000 [ 39.086806][ T248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 39.087217][ T248] CR2: 0000000000000000 CR3: 0000000003c92005 CR4: 0000000000360ef0 [ 39.087706][ T248] Call Trace: [ 39.087909][ T248] ? vimc_streamer_pipeline_terminate+0x90/0x90 [vimc] [ 39.088318][ T248] vimc_streamer_thread+0x7c/0xe0 [vimc] [ 39.088663][ T248] kthread+0x10d/0x130 [ 39.088919][ T248] ? kthread_park+0x80/0x80 [ 39.089205][ T248] ret_from_fork+0x35/0x40 [ 39.089475][ T248] Modules linked in: vimc videobuf2_vmalloc videobuf2_memops v4l2_tpg videobuf2_v4l2 videobuf2_common videodev mc [ 39.090208][ T248] CR2: 0000000000000000 [ 39.090463][ T248] ---[ end trace 697650fefbf78bee ]--- [ 39.090796][ T248] RIP: 0010:vimc_sca_process_frame+0xdb/0x210 [vimc] [ 39.091209][ T248] Code: 44 8d 0c 28 8b 93 a4 01 00 00 48 8b 8b 98 01 00 00 85 d2 74 40 48 8b 74 24 10 8d 7a ff 4c 01 c9 31 d2 4c 01 fe eb 03 4c 89 c2 <44> 0f b6 04 16 44 88 04 11 4c 8d 42 01 48 39 fa 75 eb 8b 93 a4 01 [ 39.092417][ T248] RSP: 0018:ffffb15a005abe90 EFLAGS: 00010246 [ 39.092789][ T248] RAX: 0000000000000000 RBX: ffffa3fdc46d2e00 RCX: ffffb15a02579000 [ 39.093278][ T248] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [ 39.093766][ T248] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 39.094254][ T248] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 39.094742][ T248] R13: ffffa3fdc46d2ee0 R14: 0000000000000000 R15: 0000000000000000 [ 39.095309][ T248] FS: 0000000000000000(0000) GS:ffffa3fdc7800000(0000) knlGS:0000000000000000 [ 39.095974][ T248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 39.096372][ T248] CR2: 0000000000000000 CR3: 0000000003c92005 CR4: 0000000000360ef0 Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-10 06:25:03 +00:00
bool vimc_is_source(struct media_entity *ent)
{
unsigned int i;
for (i = 0; i < ent->num_pads; i++)
if (ent->pads[i].flags & MEDIA_PAD_FL_SINK)
return false;
return true;
}
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
const struct vimc_pix_map *vimc_pix_map_by_index(unsigned int i)
{
if (i >= ARRAY_SIZE(vimc_pix_map_list))
return NULL;
return &vimc_pix_map_list[i];
}
u32 vimc_mbus_code_by_index(unsigned int index)
{
unsigned int i, j;
for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
for (j = 0; j < ARRAY_SIZE(vimc_pix_map_list[i].code); j++) {
if (!vimc_pix_map_list[i].code[j])
break;
if (!index)
return vimc_pix_map_list[i].code[j];
index--;
}
}
return 0;
}
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
const struct vimc_pix_map *vimc_pix_map_by_code(u32 code)
{
unsigned int i, j;
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
for (j = 0; j < ARRAY_SIZE(vimc_pix_map_list[i].code); j++) {
if (vimc_pix_map_list[i].code[j] == code)
return &vimc_pix_map_list[i];
}
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
}
return NULL;
}
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat)
{
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
unsigned int i;
media: Revert "media: vimc: propagate pixel format in the stream" This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-09 00:27:41 +00:00
for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
if (vimc_pix_map_list[i].pixelformat == pixelformat)
return &vimc_pix_map_list[i];
}
return NULL;
}
static int vimc_get_pix_format(struct media_pad *pad,
struct v4l2_pix_format *fmt)
{
if (is_media_entity_v4l2_subdev(pad->entity)) {
struct v4l2_subdev *sd =
media_entity_to_v4l2_subdev(pad->entity);
struct v4l2_subdev_format sd_fmt;
const struct vimc_pix_map *pix_map;
int ret;
sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
sd_fmt.pad = pad->index;
ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sd_fmt);
if (ret)
return ret;
v4l2_fill_pix_format(fmt, &sd_fmt.format);
pix_map = vimc_pix_map_by_code(sd_fmt.format.code);
fmt->pixelformat = pix_map->pixelformat;
} else if (is_media_entity_v4l2_video_device(pad->entity)) {
struct video_device *vdev = container_of(pad->entity,
struct video_device,
entity);
struct vimc_ent_device *ved = video_get_drvdata(vdev);
if (!ved->vdev_get_format)
return -ENOIOCTLCMD;
ved->vdev_get_format(ved, fmt);
} else {
return -EINVAL;
}
return 0;
}
int vimc_vdev_link_validate(struct media_link *link)
{
struct v4l2_pix_format source_fmt, sink_fmt;
int ret;
ret = vimc_get_pix_format(link->source, &source_fmt);
if (ret)
return ret;
ret = vimc_get_pix_format(link->sink, &sink_fmt);
if (ret)
return ret;
pr_info("vimc link validate: "
"%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
"%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
/* src */
link->source->entity->name,
source_fmt.width, source_fmt.height,
source_fmt.pixelformat, source_fmt.colorspace,
source_fmt.quantization, source_fmt.xfer_func,
source_fmt.ycbcr_enc,
/* sink */
link->sink->entity->name,
sink_fmt.width, sink_fmt.height,
sink_fmt.pixelformat, sink_fmt.colorspace,
sink_fmt.quantization, sink_fmt.xfer_func,
sink_fmt.ycbcr_enc);
/* The width, height and pixelformat must match. */
if (source_fmt.width != sink_fmt.width ||
source_fmt.height != sink_fmt.height ||
source_fmt.pixelformat != sink_fmt.pixelformat)
return -EPIPE;
/*
* The field order must match, or the sink field order must be NONE
* to support interlaced hardware connected to bridges that support
* progressive formats only.
*/
if (source_fmt.field != sink_fmt.field &&
sink_fmt.field != V4L2_FIELD_NONE)
return -EPIPE;
/*
* If colorspace is DEFAULT, then assume all the colorimetry is also
* DEFAULT, return 0 to skip comparing the other colorimetry parameters
*/
if (source_fmt.colorspace == V4L2_COLORSPACE_DEFAULT ||
sink_fmt.colorspace == V4L2_COLORSPACE_DEFAULT)
return 0;
/* Colorspace must match. */
if (source_fmt.colorspace != sink_fmt.colorspace)
return -EPIPE;
/* Colorimetry must match if they are not set to DEFAULT */
if (source_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
sink_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
source_fmt.ycbcr_enc != sink_fmt.ycbcr_enc)
return -EPIPE;
if (source_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
sink_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
source_fmt.quantization != sink_fmt.quantization)
return -EPIPE;
if (source_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
sink_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
source_fmt.xfer_func != sink_fmt.xfer_func)
return -EPIPE;
return 0;
}
static const struct media_entity_operations vimc_ent_sd_mops = {
.link_validate = v4l2_subdev_link_validate,
};
int vimc_ent_sd_register(struct vimc_ent_device *ved,
struct v4l2_subdev *sd,
struct v4l2_device *v4l2_dev,
const char *const name,
u32 function,
u16 num_pads,
struct media_pad *pads,
const struct v4l2_subdev_ops *sd_ops)
{
int ret;
/* Fill the vimc_ent_device struct */
ved->ent = &sd->entity;
/* Initialize the subdev */
v4l2_subdev_init(sd, sd_ops);
sd->entity.function = function;
sd->entity.ops = &vimc_ent_sd_mops;
sd->owner = THIS_MODULE;
strscpy(sd->name, name, sizeof(sd->name));
v4l2_set_subdevdata(sd, ved);
/* Expose this subdev to user space */
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
if (sd->ctrl_handler)
sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
/* Initialize the media entity */
ret = media_entity_pads_init(&sd->entity, num_pads, pads);
if (ret)
return ret;
/* Register the subdev with the v4l2 and the media framework */
ret = v4l2_device_register_subdev(v4l2_dev, sd);
if (ret) {
dev_err(v4l2_dev->dev,
"%s: subdev register failed (err=%d)\n",
name, ret);
goto err_clean_m_ent;
}
return 0;
err_clean_m_ent:
media_entity_cleanup(&sd->entity);
return ret;
}