linux/arch/x86/kernel/early-quirks.c

709 lines
18 KiB
C
Raw Normal View History

/* Various workarounds for chipset bugs.
This code runs very early and can't use the regular PCI subsystem
The entries are keyed to PCI bridges which usually identify chipsets
uniquely.
This is only for whole classes of chipsets with specific problems which
need early invasive action (e.g. before the timers are initialized).
Most PCI device specific workarounds can be done later and should be
in standard PCI quirks
Mainboard specific bugs should be handled by DMI entries.
CPU specific bugs in setup.c */
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/pci_ids.h>
#include <drm/i915_drm.h>
#include <asm/pci-direct.h>
#include <asm/dma.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/hpet.h>
#include <asm/iommu.h>
#include <asm/gart.h>
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
#include <asm/irq_remapping.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
u32 htcfg;
/*
* we found a hypertransport bus
* make sure that we are broadcasting
* interrupts to all cpus on the ht bus
* if we're using extended apic ids
*/
htcfg = read_pci_config(num, slot, func, 0x68);
if (htcfg & (1 << 18)) {
printk(KERN_INFO "Detected use of extended apic ids "
"on hypertransport bus\n");
if ((htcfg & (1 << 17)) == 0) {
printk(KERN_INFO "Enabling hypertransport extended "
"apic interrupt broadcast\n");
printk(KERN_INFO "Note this is a bios bug, "
"please contact your hw vendor\n");
htcfg |= (1 << 17);
write_pci_config(num, slot, func, 0x68, htcfg);
}
}
}
static void __init via_bugs(int num, int slot, int func)
{
#ifdef CONFIG_GART_IOMMU
if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
!gart_iommu_aperture_allowed) {
printk(KERN_INFO
"Looks like a VIA chipset. Disabling IOMMU."
" Override with iommu=allowed\n");
gart_iommu_aperture_disabled = 1;
}
#endif
}
#ifdef CONFIG_ACPI
#ifdef CONFIG_X86_IO_APIC
static int __init nvidia_hpet_check(struct acpi_table_header *header)
{
return 0;
}
#endif /* CONFIG_X86_IO_APIC */
#endif /* CONFIG_ACPI */
static void __init nvidia_bugs(int num, int slot, int func)
{
#ifdef CONFIG_ACPI
#ifdef CONFIG_X86_IO_APIC
/*
* All timer overrides on Nvidia are
* wrong unless HPET is enabled.
* Unfortunately that's not true on many Asus boards.
* We don't know yet how to detect this automatically, but
* at least allow a command line override.
*/
if (acpi_use_timer_override)
return;
if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
"detected. Ignoring ACPI "
"timer override.\n");
printk(KERN_INFO "If you got timer trouble "
"try acpi_use_timer_override\n");
}
#endif
#endif
/* RED-PEN skip them on mptables too? */
}
#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
{
u32 d;
u8 b;
b = read_pci_config_byte(num, slot, func, 0xac);
b &= ~(1<<5);
write_pci_config_byte(num, slot, func, 0xac, b);
d = read_pci_config(num, slot, func, 0x70);
d |= 1<<8;
write_pci_config(num, slot, func, 0x70, d);
d = read_pci_config(num, slot, func, 0x8);
d &= 0xff;
return d;
}
static void __init ati_bugs(int num, int slot, int func)
{
u32 d;
u8 b;
if (acpi_use_timer_override)
return;
d = ati_ixp4x0_rev(num, slot, func);
if (d < 0x82)
acpi_skip_timer_override = 1;
else {
/* check for IRQ0 interrupt swap */
outb(0x72, 0xcd6); b = inb(0xcd7);
if (!(b & 0x2))
acpi_skip_timer_override = 1;
}
if (acpi_skip_timer_override) {
printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
printk(KERN_INFO "Ignoring ACPI timer override.\n");
printk(KERN_INFO "If you got timer trouble "
"try acpi_use_timer_override\n");
}
}
static u32 __init ati_sbx00_rev(int num, int slot, int func)
{
u32 d;
d = read_pci_config(num, slot, func, 0x8);
d &= 0xff;
return d;
}
static void __init ati_bugs_contd(int num, int slot, int func)
{
u32 d, rev;
rev = ati_sbx00_rev(num, slot, func);
if (rev >= 0x40)
acpi_fix_pin2_polarity = 1;
/*
* SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
* SB700: revisions 0x39, 0x3a, ...
* SB800: revisions 0x40, 0x41, ...
*/
if (rev >= 0x39)
return;
if (acpi_use_timer_override)
return;
/* check for IRQ0 interrupt swap */
d = read_pci_config(num, slot, func, 0x64);
if (!(d & (1<<14)))
acpi_skip_timer_override = 1;
if (acpi_skip_timer_override) {
printk(KERN_INFO "SB600 revision 0x%x\n", rev);
printk(KERN_INFO "Ignoring ACPI timer override.\n");
printk(KERN_INFO "If you got timer trouble "
"try acpi_use_timer_override\n");
}
}
#else
static void __init ati_bugs(int num, int slot, int func)
{
}
static void __init ati_bugs_contd(int num, int slot, int func)
{
}
#endif
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
static void __init intel_remapping_check(int num, int slot, int func)
{
u8 revision;
u16 device;
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
/*
* Revision <= 13 of all triggering devices id in this quirk
* have a problem draining interrupts when irq remapping is
* enabled, and should be flagged as broken. Additionally
* revision 0x22 of device id 0x3405 has this problem.
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
*/
if (revision <= 0x13)
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
set_irq_remapping_broken();
else if (device == 0x3405 && revision == 0x22)
set_irq_remapping_broken();
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
}
/*
* Systems with Intel graphics controllers set aside memory exclusively
* for gfx driver use. This memory is not marked in the E820 as reserved
* or as RAM, and so is subject to overlap from E820 manipulation later
* in the boot process. On some systems, MMIO space is allocated on top,
* despite the efforts of the "RAM buffer" approach, which simply rounds
* memory boundaries up to 64M to try to catch space that may decode
* as RAM and so is not suitable for MMIO.
*
* And yes, so far on current devices the base addr is always under 4G.
*/
static u32 __init intel_stolen_base(int num, int slot, int func, size_t stolen_size)
{
u32 base;
/*
* For the PCI IDs in this quirk, the stolen base is always
* in 0x5c, aka the BDSM register (yes that's really what
* it's called).
*/
base = read_pci_config(num, slot, func, 0x5c);
base &= ~((1<<20) - 1);
return base;
}
#define KB(x) ((x) * 1024UL)
#define MB(x) (KB (KB (x)))
#define GB(x) (MB (KB (x)))
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
static size_t __init i830_tseg_size(void)
{
u8 tmp = read_pci_config_byte(0, 0, 0, I830_ESMRAMC);
if (!(tmp & TSEG_ENABLE))
return 0;
if (tmp & I830_TSEG_SIZE_1M)
return MB(1);
else
return KB(512);
}
static size_t __init i845_tseg_size(void)
{
u8 tmp = read_pci_config_byte(0, 0, 0, I845_ESMRAMC);
if (!(tmp & TSEG_ENABLE))
return 0;
switch (tmp & I845_TSEG_SIZE_MASK) {
case I845_TSEG_SIZE_512K:
return KB(512);
case I845_TSEG_SIZE_1M:
return MB(1);
default:
WARN_ON(1);
return 0;
}
}
static size_t __init i85x_tseg_size(void)
{
u8 tmp = read_pci_config_byte(0, 0, 0, I85X_ESMRAMC);
if (!(tmp & TSEG_ENABLE))
return 0;
return MB(1);
}
static size_t __init i830_mem_size(void)
{
return read_pci_config_byte(0, 0, 0, I830_DRB3) * MB(32);
}
static size_t __init i85x_mem_size(void)
{
return read_pci_config_byte(0, 0, 1, I85X_DRB3) * MB(32);
}
/*
* On 830/845/85x the stolen memory base isn't available in any
* register. We need to calculate it as TOM-TSEG_SIZE-stolen_size.
*/
static u32 __init i830_stolen_base(int num, int slot, int func, size_t stolen_size)
{
return i830_mem_size() - i830_tseg_size() - stolen_size;
}
static u32 __init i845_stolen_base(int num, int slot, int func, size_t stolen_size)
{
return i830_mem_size() - i845_tseg_size() - stolen_size;
}
static u32 __init i85x_stolen_base(int num, int slot, int func, size_t stolen_size)
{
return i85x_mem_size() - i85x_tseg_size() - stolen_size;
}
static u32 __init i865_stolen_base(int num, int slot, int func, size_t stolen_size)
{
/*
* FIXME is the graphics stolen memory region
* always at TOUD? Ie. is it always the last
* one to be allocated by the BIOS?
*/
return read_pci_config_16(0, 0, 0, I865_TOUD) << 16;
}
static size_t __init i830_stolen_size(int num, int slot, int func)
{
size_t stolen_size;
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
case I830_GMCH_GMS_STOLEN_512:
stolen_size = KB(512);
break;
case I830_GMCH_GMS_STOLEN_1024:
stolen_size = MB(1);
break;
case I830_GMCH_GMS_STOLEN_8192:
stolen_size = MB(8);
break;
case I830_GMCH_GMS_LOCAL:
/* local memory isn't part of the normal address space */
stolen_size = 0;
break;
default:
return 0;
}
return stolen_size;
}
static size_t __init gen3_stolen_size(int num, int slot, int func)
{
size_t stolen_size;
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
case I855_GMCH_GMS_STOLEN_1M:
stolen_size = MB(1);
break;
case I855_GMCH_GMS_STOLEN_4M:
stolen_size = MB(4);
break;
case I855_GMCH_GMS_STOLEN_8M:
stolen_size = MB(8);
break;
case I855_GMCH_GMS_STOLEN_16M:
stolen_size = MB(16);
break;
case I855_GMCH_GMS_STOLEN_32M:
stolen_size = MB(32);
break;
case I915_GMCH_GMS_STOLEN_48M:
stolen_size = MB(48);
break;
case I915_GMCH_GMS_STOLEN_64M:
stolen_size = MB(64);
break;
case G33_GMCH_GMS_STOLEN_128M:
stolen_size = MB(128);
break;
case G33_GMCH_GMS_STOLEN_256M:
stolen_size = MB(256);
break;
case INTEL_GMCH_GMS_STOLEN_96M:
stolen_size = MB(96);
break;
case INTEL_GMCH_GMS_STOLEN_160M:
stolen_size = MB(160);
break;
case INTEL_GMCH_GMS_STOLEN_224M:
stolen_size = MB(224);
break;
case INTEL_GMCH_GMS_STOLEN_352M:
stolen_size = MB(352);
break;
default:
stolen_size = 0;
break;
}
return stolen_size;
}
static size_t __init gen6_stolen_size(int num, int slot, int func)
{
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
gmch_ctrl >>= SNB_GMCH_GMS_SHIFT;
gmch_ctrl &= SNB_GMCH_GMS_MASK;
return gmch_ctrl << 25; /* 32 MB units */
}
static size_t __init gen8_stolen_size(int num, int slot, int func)
{
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
gmch_ctrl >>= BDW_GMCH_GMS_SHIFT;
gmch_ctrl &= BDW_GMCH_GMS_MASK;
return gmch_ctrl << 25; /* 32 MB units */
}
static size_t __init chv_stolen_size(int num, int slot, int func)
{
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
gmch_ctrl >>= SNB_GMCH_GMS_SHIFT;
gmch_ctrl &= SNB_GMCH_GMS_MASK;
/*
* 0x0 to 0x10: 32MB increments starting at 0MB
* 0x11 to 0x16: 4MB increments starting at 8MB
* 0x17 to 0x1d: 4MB increments start at 36MB
*/
if (gmch_ctrl < 0x11)
return gmch_ctrl << 25;
else if (gmch_ctrl < 0x17)
return (gmch_ctrl - 0x11 + 2) << 22;
else
return (gmch_ctrl - 0x17 + 9) << 22;
}
struct intel_stolen_funcs {
size_t (*size)(int num, int slot, int func);
u32 (*base)(int num, int slot, int func, size_t size);
};
static size_t __init gen9_stolen_size(int num, int slot, int func)
{
u16 gmch_ctrl;
gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
gmch_ctrl >>= BDW_GMCH_GMS_SHIFT;
gmch_ctrl &= BDW_GMCH_GMS_MASK;
if (gmch_ctrl < 0xf0)
return gmch_ctrl << 25; /* 32 MB units */
else
/* 4MB increments starting at 0xf0 for 4MB */
return (gmch_ctrl - 0xf0 + 1) << 22;
}
typedef size_t (*stolen_size_fn)(int num, int slot, int func);
static const struct intel_stolen_funcs i830_stolen_funcs __initconst = {
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
.base = i830_stolen_base,
.size = i830_stolen_size,
};
static const struct intel_stolen_funcs i845_stolen_funcs __initconst = {
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
.base = i845_stolen_base,
.size = i830_stolen_size,
};
static const struct intel_stolen_funcs i85x_stolen_funcs __initconst = {
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
.base = i85x_stolen_base,
.size = gen3_stolen_size,
};
static const struct intel_stolen_funcs i865_stolen_funcs __initconst = {
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
.base = i865_stolen_base,
.size = gen3_stolen_size,
};
static const struct intel_stolen_funcs gen3_stolen_funcs __initconst = {
.base = intel_stolen_base,
.size = gen3_stolen_size,
};
static const struct intel_stolen_funcs gen6_stolen_funcs __initconst = {
.base = intel_stolen_base,
.size = gen6_stolen_size,
};
static const struct intel_stolen_funcs gen8_stolen_funcs __initconst = {
.base = intel_stolen_base,
.size = gen8_stolen_size,
};
static const struct intel_stolen_funcs gen9_stolen_funcs __initconst = {
.base = intel_stolen_base,
.size = gen9_stolen_size,
};
static const struct intel_stolen_funcs chv_stolen_funcs __initconst = {
.base = intel_stolen_base,
.size = chv_stolen_size,
};
static const struct pci_device_id intel_stolen_ids[] __initconst = {
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05 19:28:59 +00:00
INTEL_I830_IDS(&i830_stolen_funcs),
INTEL_I845G_IDS(&i845_stolen_funcs),
INTEL_I85X_IDS(&i85x_stolen_funcs),
INTEL_I865G_IDS(&i865_stolen_funcs),
INTEL_I915G_IDS(&gen3_stolen_funcs),
INTEL_I915GM_IDS(&gen3_stolen_funcs),
INTEL_I945G_IDS(&gen3_stolen_funcs),
INTEL_I945GM_IDS(&gen3_stolen_funcs),
INTEL_VLV_M_IDS(&gen6_stolen_funcs),
INTEL_VLV_D_IDS(&gen6_stolen_funcs),
INTEL_PINEVIEW_IDS(&gen3_stolen_funcs),
INTEL_I965G_IDS(&gen3_stolen_funcs),
INTEL_G33_IDS(&gen3_stolen_funcs),
INTEL_I965GM_IDS(&gen3_stolen_funcs),
INTEL_GM45_IDS(&gen3_stolen_funcs),
INTEL_G45_IDS(&gen3_stolen_funcs),
INTEL_IRONLAKE_D_IDS(&gen3_stolen_funcs),
INTEL_IRONLAKE_M_IDS(&gen3_stolen_funcs),
INTEL_SNB_D_IDS(&gen6_stolen_funcs),
INTEL_SNB_M_IDS(&gen6_stolen_funcs),
INTEL_IVB_M_IDS(&gen6_stolen_funcs),
INTEL_IVB_D_IDS(&gen6_stolen_funcs),
INTEL_HSW_D_IDS(&gen6_stolen_funcs),
INTEL_HSW_M_IDS(&gen6_stolen_funcs),
INTEL_BDW_M_IDS(&gen8_stolen_funcs),
INTEL_BDW_D_IDS(&gen8_stolen_funcs),
INTEL_CHV_IDS(&chv_stolen_funcs),
INTEL_SKL_IDS(&gen9_stolen_funcs),
INTEL_BXT_IDS(&gen9_stolen_funcs),
};
static void __init intel_graphics_stolen(int num, int slot, int func)
{
size_t size;
int i;
u32 start;
u16 device, subvendor, subdevice;
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
subvendor = read_pci_config_16(num, slot, func,
PCI_SUBSYSTEM_VENDOR_ID);
subdevice = read_pci_config_16(num, slot, func, PCI_SUBSYSTEM_ID);
for (i = 0; i < ARRAY_SIZE(intel_stolen_ids); i++) {
if (intel_stolen_ids[i].device == device) {
const struct intel_stolen_funcs *stolen_funcs =
(const struct intel_stolen_funcs *)intel_stolen_ids[i].driver_data;
size = stolen_funcs->size(num, slot, func);
start = stolen_funcs->base(num, slot, func, size);
if (size && start) {
printk(KERN_INFO "Reserving Intel graphics stolen memory at 0x%x-0x%x\n",
start, start + (u32)size - 1);
/* Mark this space as reserved */
e820_add_region(start, size, E820_RESERVED);
sanitize_e820_map(e820.map,
ARRAY_SIZE(e820.map),
&e820.nr_map);
}
return;
}
}
}
static void __init force_disable_hpet(int num, int slot, int func)
{
#ifdef CONFIG_HPET_TIMER
boot_hpet_disable = 1;
pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n");
#endif
}
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
struct chipset {
u32 vendor;
u32 device;
u32 class;
u32 class_mask;
u32 flags;
void (*f)(int num, int slot, int func);
};
/*
* Only works for devices on the root bus. If you add any devices
* not on bus 0 readd another loop level in early_quirks(). But
* be careful because at least the Nvidia quirk here relies on
* only matching on bus 0.
*/
static struct chipset early_qrk[] __initdata = {
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{ PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-16 20:38:32 +00:00
{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
QFLAG_APPLY_ONCE, intel_graphics_stolen },
/*
* HPET on the current version of the Baytrail platform has accuracy
* problems: it will halt in deep idle state - so we disable it.
*
* More details can be found in section 18.10.1.3 of the datasheet:
*
* http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf
*/
{ PCI_VENDOR_ID_INTEL, 0x0f00,
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
{}
};
/**
* check_dev_quirk - apply early quirks to a given PCI device
* @num: bus number
* @slot: slot number
* @func: PCI function
*
* Check the vendor & device ID against the early quirks table.
*
* If the device is single function, let early_quirks() know so we don't
* poke at this device again.
*/
static int __init check_dev_quirk(int num, int slot, int func)
{
u16 class;
u16 vendor;
u16 device;
u8 type;
int i;
class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
if (class == 0xffff)
return -1; /* no class, treat as single function */
vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
for (i = 0; early_qrk[i].f != NULL; i++) {
if (((early_qrk[i].vendor == PCI_ANY_ID) ||
(early_qrk[i].vendor == vendor)) &&
((early_qrk[i].device == PCI_ANY_ID) ||
(early_qrk[i].device == device)) &&
(!((early_qrk[i].class ^ class) &
early_qrk[i].class_mask))) {
if ((early_qrk[i].flags &
QFLAG_DONE) != QFLAG_DONE)
early_qrk[i].f(num, slot, func);
early_qrk[i].flags |= QFLAG_APPLIED;
}
}
type = read_pci_config_byte(num, slot, func,
PCI_HEADER_TYPE);
if (!(type & 0x80))
return -1;
return 0;
}
void __init early_quirks(void)
{
int slot, func;
if (!early_pci_allowed())
return;
/* Poor man's PCI discovery */
/* Only scan the root bus */
for (slot = 0; slot < 32; slot++)
for (func = 0; func < 8; func++) {
/* Only probe function 0 on single fn devices */
if (check_dev_quirk(0, slot, func))
break;
}
}