2014-02-07 07:24:56 +00:00
|
|
|
/*
|
|
|
|
|
* Copyright 2013 Gateworks Corporation
|
|
|
|
|
*
|
|
|
|
|
* The code contained herein is licensed under the GNU General Public
|
|
|
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
|
|
|
* Version 2 or later at the following locations:
|
|
|
|
|
*
|
|
|
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
|
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
|
|
|
*/
|
|
|
|
|
|
2014-09-09 06:07:28 +00:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
|
|
2014-02-07 07:24:56 +00:00
|
|
|
/ {
|
|
|
|
|
/* these are used by bootloader for disabling nodes */
|
|
|
|
|
aliases {
|
|
|
|
|
ethernet1 = ð1;
|
|
|
|
|
led0 = &led0;
|
|
|
|
|
led1 = &led1;
|
|
|
|
|
led2 = &led2;
|
|
|
|
|
nand = &gpmi;
|
|
|
|
|
ssi0 = &ssi1;
|
|
|
|
|
usb0 = &usbh1;
|
|
|
|
|
usb1 = &usbotg;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
|
bootargs = "console=ttymxc1,115200";
|
|
|
|
|
};
|
|
|
|
|
|
2014-05-01 06:32:30 +00:00
|
|
|
backlight {
|
|
|
|
|
compatible = "pwm-backlight";
|
|
|
|
|
pwms = <&pwm4 0 5000000>;
|
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
|
|
|
default-brightness-level = <7>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-02-07 07:24:56 +00:00
|
|
|
leds {
|
|
|
|
|
compatible = "gpio-leds";
|
2014-09-09 06:07:30 +00:00
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
2014-02-07 07:24:56 +00:00
|
|
|
|
|
|
|
|
led0: user1 {
|
|
|
|
|
label = "user1";
|
2014-09-09 06:07:28 +00:00
|
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
2014-02-07 07:24:56 +00:00
|
|
|
default-state = "on";
|
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led1: user2 {
|
|
|
|
|
label = "user2";
|
2014-09-09 06:07:28 +00:00
|
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
2014-02-07 07:24:56 +00:00
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led2: user3 {
|
|
|
|
|
label = "user3";
|
2014-09-09 06:07:28 +00:00
|
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
|
2014-02-07 07:24:56 +00:00
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
reg = <0x10000000 0x40000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pps {
|
|
|
|
|
compatible = "pps-gpio";
|
2014-09-09 06:07:30 +00:00
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_pps>;
|
2014-09-09 06:07:28 +00:00
|
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
2014-02-07 07:24:56 +00:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
reg_1p0v: regulator@0 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
regulator-name = "1P0V";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* remove when pmic 1p8 regulator available */
|
|
|
|
|
reg_1p8v: regulator@1 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <1>;
|
|
|
|
|
regulator-name = "1P8V";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
reg_3p3v: regulator@2 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <2>;
|
|
|
|
|
regulator-name = "3P3V";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
reg_usb_h1_vbus: regulator@3 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <3>;
|
|
|
|
|
regulator-name = "usb_h1_vbus";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
reg_usb_otg_vbus: regulator@4 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <4>;
|
|
|
|
|
regulator-name = "usb_otg_vbus";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
2014-09-09 06:07:28 +00:00
|
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
2014-02-07 07:24:56 +00:00
|
|
|
enable-active-high;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sound {
|
2014-05-22 06:04:54 +00:00
|
|
|
compatible = "fsl,imx6q-ventana-sgtl5000",
|
2014-02-07 07:24:56 +00:00
|
|
|
"fsl,imx-audio-sgtl5000";
|
2014-05-22 06:04:54 +00:00
|
|
|
model = "sgtl5000-audio";
|
2014-02-07 07:24:56 +00:00
|
|
|
ssi-controller = <&ssi1>;
|
|
|
|
|
audio-codec = <&codec>;
|
|
|
|
|
audio-routing =
|
|
|
|
|
"MIC_IN", "Mic Jack",
|
|
|
|
|
"Mic Jack", "Mic Bias",
|
|
|
|
|
"Headphone Jack", "HP_OUT";
|
|
|
|
|
mux-int-port = <1>;
|
|
|
|
|
mux-ext-port = <4>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&audmux {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&can1 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&fec {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
|
|
|
phy-mode = "rgmii";
|
2014-09-09 06:07:28 +00:00
|
|
|
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
2014-02-07 07:24:56 +00:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&gpmi {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2014-04-23 07:47:51 +00:00
|
|
|
&hdmi {
|
|
|
|
|
ddc-i2c-bus = <&i2c3>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2014-02-07 07:24:56 +00:00
|
|
|
&i2c1 {
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
eeprom1: eeprom@50 {
|
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
|
reg = <0x50>;
|
|
|
|
|
pagesize = <16>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
eeprom2: eeprom@51 {
|
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
|
reg = <0x51>;
|
|
|
|
|
pagesize = <16>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
eeprom3: eeprom@52 {
|
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
|
reg = <0x52>;
|
|
|
|
|
pagesize = <16>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
eeprom4: eeprom@53 {
|
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
|
reg = <0x53>;
|
|
|
|
|
pagesize = <16>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio: pca9555@23 {
|
|
|
|
|
compatible = "nxp,pca9555";
|
|
|
|
|
reg = <0x23>;
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
rtc: ds1672@68 {
|
|
|
|
|
compatible = "dallas,ds1672";
|
|
|
|
|
reg = <0x68>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c2 {
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c3 {
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
codec: sgtl5000@0a {
|
|
|
|
|
compatible = "fsl,sgtl5000";
|
|
|
|
|
reg = <0x0a>;
|
|
|
|
|
clocks = <&clks 201>;
|
|
|
|
|
VDDA-supply = <®_1p8v>;
|
|
|
|
|
VDDIO-supply = <®_3p3v>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
touchscreen: egalax_ts@04 {
|
|
|
|
|
compatible = "eeti,egalax_ts";
|
|
|
|
|
reg = <0x04>;
|
|
|
|
|
interrupt-parent = <&gpio1>;
|
2014-09-09 06:07:28 +00:00
|
|
|
interrupts = <11 2>;
|
|
|
|
|
wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
2014-02-07 07:24:56 +00:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-09 06:07:30 +00:00
|
|
|
&ldb {
|
|
|
|
|
status = "okay";
|
2014-02-07 07:24:56 +00:00
|
|
|
|
2014-09-09 06:07:30 +00:00
|
|
|
lvds-channel@1 {
|
|
|
|
|
fsl,data-mapping = "spwg";
|
|
|
|
|
fsl,data-width = <18>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
display-timings {
|
|
|
|
|
native-mode = <&timing0>;
|
|
|
|
|
timing0: hsd100pxn1 {
|
|
|
|
|
clock-frequency = <65000000>;
|
|
|
|
|
hactive = <1024>;
|
|
|
|
|
vactive = <768>;
|
|
|
|
|
hback-porch = <220>;
|
|
|
|
|
hfront-porch = <40>;
|
|
|
|
|
vback-porch = <21>;
|
|
|
|
|
vfront-porch = <7>;
|
|
|
|
|
hsync-len = <60>;
|
|
|
|
|
vsync-len = <10>;
|
|
|
|
|
};
|
2014-02-07 07:24:56 +00:00
|
|
|
};
|
2014-09-09 06:07:30 +00:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pcie {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
|
|
|
reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
|
|
|
|
compatible = "marvell,sky2";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pwm4 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&ssi1 {
|
|
|
|
|
fsl,mode = "i2s-slave";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
2014-02-07 07:24:56 +00:00
|
|
|
|
2014-09-09 06:07:30 +00:00
|
|
|
&uart1 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&uart5 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usbotg {
|
|
|
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
|
|
|
disable-over-current;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usbh1 {
|
|
|
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usdhc3 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
|
|
|
cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&iomuxc {
|
|
|
|
|
imx6qdl-gw53xx {
|
2014-02-07 07:24:56 +00:00
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
|
|
|
|
|
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
|
|
|
|
|
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
|
|
|
|
|
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
|
2014-09-09 06:07:30 +00:00
|
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
|
2014-02-07 07:24:56 +00:00
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_enet: enetgrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_flexcan1: flexcan1grp {
|
|
|
|
|
fsl,pins = <
|
2014-09-09 06:07:29 +00:00
|
|
|
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
|
|
|
|
|
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
|
2014-09-09 06:07:30 +00:00
|
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
|
|
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
|
2014-02-07 07:24:56 +00:00
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
|
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
|
|
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
|
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
|
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
|
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
|
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
|
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-09 06:07:30 +00:00
|
|
|
pinctrl_pcie: pciegrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
|
|
|
|
|
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_pps: ppsgrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-05-01 06:32:30 +00:00
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-02-07 07:24:56 +00:00
|
|
|
pinctrl_uart1: uart1grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
|
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
|
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
|
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
2014-09-09 06:07:30 +00:00
|
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
|
|
|
|
|
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
|
2014-02-07 07:24:56 +00:00
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
|
|
|
fsl,pins = <
|
|
|
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
|
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
|
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
|
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
|
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
|
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
2014-09-09 06:07:30 +00:00
|
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
|
2014-02-07 07:24:56 +00:00
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
