2006-11-09 13:51:17 +00:00
|
|
|
/*
|
|
|
|
* Atmel MACB Ethernet Controller driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#ifndef _MACB_H
|
|
|
|
#define _MACB_H
|
|
|
|
|
2012-10-31 06:04:56 +00:00
|
|
|
#define MACB_GREGS_NBR 16
|
|
|
|
#define MACB_GREGS_VERSION 1
|
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12 12:26:44 +00:00
|
|
|
#define MACB_MAX_QUEUES 8
|
2012-10-31 06:04:56 +00:00
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* MACB register offsets */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_NCR 0x0000 /* Network Control */
|
|
|
|
#define MACB_NCFGR 0x0004 /* Network Config */
|
|
|
|
#define MACB_NSR 0x0008 /* Network Status */
|
2012-10-18 11:01:06 +00:00
|
|
|
#define MACB_TAR 0x000c /* AT91RM9200 only */
|
|
|
|
#define MACB_TCR 0x0010 /* AT91RM9200 only */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TSR 0x0014 /* Transmit Status */
|
|
|
|
#define MACB_RBQP 0x0018 /* RX Q Base Address */
|
|
|
|
#define MACB_TBQP 0x001c /* TX Q Base Address */
|
|
|
|
#define MACB_RSR 0x0020 /* Receive Status */
|
|
|
|
#define MACB_ISR 0x0024 /* Interrupt Status */
|
|
|
|
#define MACB_IER 0x0028 /* Interrupt Enable */
|
|
|
|
#define MACB_IDR 0x002c /* Interrupt Disable */
|
|
|
|
#define MACB_IMR 0x0030 /* Interrupt Mask */
|
|
|
|
#define MACB_MAN 0x0034 /* PHY Maintenance */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_PTR 0x0038
|
|
|
|
#define MACB_PFR 0x003c
|
|
|
|
#define MACB_FTO 0x0040
|
|
|
|
#define MACB_SCF 0x0044
|
|
|
|
#define MACB_MCF 0x0048
|
|
|
|
#define MACB_FRO 0x004c
|
|
|
|
#define MACB_FCSE 0x0050
|
|
|
|
#define MACB_ALE 0x0054
|
|
|
|
#define MACB_DTF 0x0058
|
|
|
|
#define MACB_LCOL 0x005c
|
|
|
|
#define MACB_EXCOL 0x0060
|
|
|
|
#define MACB_TUND 0x0064
|
|
|
|
#define MACB_CSE 0x0068
|
|
|
|
#define MACB_RRE 0x006c
|
|
|
|
#define MACB_ROVR 0x0070
|
|
|
|
#define MACB_RSE 0x0074
|
|
|
|
#define MACB_ELE 0x0078
|
|
|
|
#define MACB_RJA 0x007c
|
|
|
|
#define MACB_USF 0x0080
|
|
|
|
#define MACB_STE 0x0084
|
|
|
|
#define MACB_RLE 0x0088
|
|
|
|
#define MACB_TPF 0x008c
|
|
|
|
#define MACB_HRB 0x0090
|
|
|
|
#define MACB_HRT 0x0094
|
|
|
|
#define MACB_SA1B 0x0098
|
|
|
|
#define MACB_SA1T 0x009c
|
|
|
|
#define MACB_SA2B 0x00a0
|
|
|
|
#define MACB_SA2T 0x00a4
|
|
|
|
#define MACB_SA3B 0x00a8
|
|
|
|
#define MACB_SA3T 0x00ac
|
|
|
|
#define MACB_SA4B 0x00b0
|
|
|
|
#define MACB_SA4T 0x00b4
|
|
|
|
#define MACB_TID 0x00b8
|
|
|
|
#define MACB_TPQ 0x00bc
|
|
|
|
#define MACB_USRIO 0x00c0
|
|
|
|
#define MACB_WOL 0x00c4
|
2011-11-08 10:12:32 +00:00
|
|
|
#define MACB_MID 0x00fc
|
|
|
|
|
|
|
|
/* GEM register offsets. */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_NCFGR 0x0004 /* Network Config */
|
|
|
|
#define GEM_USRIO 0x000c /* User IO */
|
|
|
|
#define GEM_DMACFG 0x0010 /* DMA Configuration */
|
|
|
|
#define GEM_HRB 0x0080 /* Hash Bottom */
|
|
|
|
#define GEM_HRT 0x0084 /* Hash Top */
|
|
|
|
#define GEM_SA1B 0x0088 /* Specific1 Bottom */
|
|
|
|
#define GEM_SA1T 0x008C /* Specific1 Top */
|
|
|
|
#define GEM_SA2B 0x0090 /* Specific2 Bottom */
|
|
|
|
#define GEM_SA2T 0x0094 /* Specific2 Top */
|
|
|
|
#define GEM_SA3B 0x0098 /* Specific3 Bottom */
|
|
|
|
#define GEM_SA3T 0x009C /* Specific3 Top */
|
|
|
|
#define GEM_SA4B 0x00A0 /* Specific4 Bottom */
|
|
|
|
#define GEM_SA4T 0x00A4 /* Specific4 Top */
|
|
|
|
#define GEM_OTX 0x0100 /* Octets transmitted */
|
2015-01-13 22:15:51 +00:00
|
|
|
#define GEM_OCTTXL 0x0100 /* Octets transmitted
|
|
|
|
* [31:0]
|
|
|
|
*/
|
|
|
|
#define GEM_OCTTXH 0x0104 /* Octets transmitted
|
|
|
|
* [47:32]
|
|
|
|
*/
|
|
|
|
#define GEM_TXCNT 0x0108 /* Error-free Frames
|
|
|
|
* Transmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXBCCNT 0x010c /* Error-free Broadcast
|
|
|
|
* Frames counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXMCCNT 0x0110 /* Error-free Multicast
|
|
|
|
* Frames counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXPAUSECNT 0x0114 /* Pause Frames
|
|
|
|
* Transmitted Counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX64CNT 0x0118 /* Error-free 64 byte
|
|
|
|
* Frames Transmitted
|
|
|
|
* counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX65CNT 0x011c /* Error-free 65-127 byte
|
|
|
|
* Frames Transmitted
|
|
|
|
* counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX128CNT 0x0120 /* Error-free 128-255
|
|
|
|
* byte Frames
|
|
|
|
* Transmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX256CNT 0x0124 /* Error-free 256-511
|
|
|
|
* byte Frames
|
|
|
|
* transmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX512CNT 0x0128 /* Error-free 512-1023
|
|
|
|
* byte Frames
|
|
|
|
* transmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX1024CNT 0x012c /* Error-free 1024-1518
|
|
|
|
* byte Frames
|
|
|
|
* transmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TX1519CNT 0x0130 /* Error-free larger than
|
|
|
|
* 1519 byte Frames
|
|
|
|
* tranmitted counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXURUNCNT 0x0134 /* TX under run error
|
|
|
|
* counter
|
|
|
|
*/
|
|
|
|
#define GEM_SNGLCOLLCNT 0x0138 /* Single Collision Frame
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_MULTICOLLCNT 0x013c /* Multiple Collision
|
|
|
|
* Frame Counter
|
|
|
|
*/
|
|
|
|
#define GEM_EXCESSCOLLCNT 0x0140 /* Excessive Collision
|
|
|
|
* Frame Counter
|
|
|
|
*/
|
|
|
|
#define GEM_LATECOLLCNT 0x0144 /* Late Collision Frame
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXDEFERCNT 0x0148 /* Deferred Transmission
|
|
|
|
* Frame Counter
|
|
|
|
*/
|
|
|
|
#define GEM_TXCSENSECNT 0x014c /* Carrier Sense Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_ORX 0x0150 /* Octets received */
|
|
|
|
#define GEM_OCTRXL 0x0150 /* Octets received
|
|
|
|
* [31:0]
|
|
|
|
*/
|
|
|
|
#define GEM_OCTRXH 0x0154 /* Octets received
|
|
|
|
* [47:32]
|
|
|
|
*/
|
|
|
|
#define GEM_RXCNT 0x0158 /* Error-free Frames
|
|
|
|
* Received Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXBROADCNT 0x015c /* Error-free Broadcast
|
|
|
|
* Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXMULTICNT 0x0160 /* Error-free Multicast
|
|
|
|
* Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXPAUSECNT 0x0164 /* Error-free Pause
|
|
|
|
* Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX64CNT 0x0168 /* Error-free 64 byte
|
|
|
|
* Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX65CNT 0x016c /* Error-free 65-127 byte
|
|
|
|
* Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX128CNT 0x0170 /* Error-free 128-255
|
|
|
|
* byte Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX256CNT 0x0174 /* Error-free 256-511
|
|
|
|
* byte Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX512CNT 0x0178 /* Error-free 512-1023
|
|
|
|
* byte Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX1024CNT 0x017c /* Error-free 1024-1518
|
|
|
|
* byte Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RX1519CNT 0x0180 /* Error-free larger than
|
|
|
|
* 1519 Frames Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXUNDRCNT 0x0184 /* Undersize Frames
|
|
|
|
* Received Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXOVRCNT 0x0188 /* Oversize Frames
|
|
|
|
* Received Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXJABCNT 0x018c /* Jabbers Received
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXFCSCNT 0x0190 /* Frame Check Sequence
|
|
|
|
* Error Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXLENGTHCNT 0x0194 /* Length Field Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXSYMBCNT 0x0198 /* Symbol Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXALIGNCNT 0x019c /* Alignment Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXRESERRCNT 0x01a0 /* Receive Resource Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXORCNT 0x01a4 /* Receive Overrun
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXIPCCNT 0x01a8 /* IP header Checksum
|
|
|
|
* Error Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXTCPCCNT 0x01ac /* TCP Checksum Error
|
|
|
|
* Counter
|
|
|
|
*/
|
|
|
|
#define GEM_RXUDPCCNT 0x01b0 /* UDP Checksum Error
|
|
|
|
* Counter
|
|
|
|
*/
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_DCFG1 0x0280 /* Design Config 1 */
|
|
|
|
#define GEM_DCFG2 0x0284 /* Design Config 2 */
|
|
|
|
#define GEM_DCFG3 0x0288 /* Design Config 3 */
|
|
|
|
#define GEM_DCFG4 0x028c /* Design Config 4 */
|
|
|
|
#define GEM_DCFG5 0x0290 /* Design Config 5 */
|
|
|
|
#define GEM_DCFG6 0x0294 /* Design Config 6 */
|
|
|
|
#define GEM_DCFG7 0x0298 /* Design Config 7 */
|
2006-11-09 13:51:17 +00:00
|
|
|
|
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12 12:26:44 +00:00
|
|
|
#define GEM_ISR(hw_q) (0x0400 + ((hw_q) << 2))
|
|
|
|
#define GEM_TBQP(hw_q) (0x0440 + ((hw_q) << 2))
|
|
|
|
#define GEM_RBQP(hw_q) (0x0480 + ((hw_q) << 2))
|
|
|
|
#define GEM_IER(hw_q) (0x0600 + ((hw_q) << 2))
|
|
|
|
#define GEM_IDR(hw_q) (0x0620 + ((hw_q) << 2))
|
|
|
|
#define GEM_IMR(hw_q) (0x0640 + ((hw_q) << 2))
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Bitfields in NCR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_LB_OFFSET 0 /* reserved */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_LB_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_LLB_OFFSET 1 /* Loop back local */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_LLB_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RE_OFFSET 2 /* Receive enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TE_OFFSET 3 /* Transmit enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_MPE_OFFSET 4 /* Management port enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_MPE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_CLRSTAT_OFFSET 5 /* Clear stats regs */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_CLRSTAT_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_INCSTAT_OFFSET 6 /* Incremental stats regs */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_INCSTAT_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_WESTAT_OFFSET 7 /* Write enable stats regs */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_WESTAT_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_BP_OFFSET 8 /* Back pressure */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_BP_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TSTART_OFFSET 9 /* Start transmission */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TSTART_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_THALT_OFFSET 10 /* Transmit halt */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_THALT_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_NCR_TPF_OFFSET 11 /* Transmit pause frame */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_NCR_TPF_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TZQ_OFFSET 12 /* Transmit zero quantum
|
|
|
|
* pause frame
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TZQ_SIZE 1
|
|
|
|
|
|
|
|
/* Bitfields in NCFGR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_SPD_OFFSET 0 /* Speed */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_SPD_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_FD_OFFSET 1 /* Full duplex */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_FD_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_BIT_RATE_OFFSET 2 /* Discard non-VLAN frames */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_BIT_RATE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_JFRAME_OFFSET 3 /* reserved */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_JFRAME_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_CAF_OFFSET 4 /* Copy all frames */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_CAF_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_NBC_OFFSET 5 /* No broadcast */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_NBC_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_NCFGR_MTI_OFFSET 6 /* Multicast hash enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_NCFGR_MTI_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_UNI_OFFSET 7 /* Unicast hash enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_UNI_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_BIG_OFFSET 8 /* Receive 1536 byte frames */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_BIG_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_EAE_OFFSET 9 /* External address match
|
|
|
|
* enable
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_EAE_SIZE 1
|
|
|
|
#define MACB_CLK_OFFSET 10
|
|
|
|
#define MACB_CLK_SIZE 2
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RTY_OFFSET 12 /* Retry test */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RTY_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_PAE_OFFSET 13 /* Pause enable */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_PAE_SIZE 1
|
2012-10-18 11:01:06 +00:00
|
|
|
#define MACB_RM9200_RMII_OFFSET 13 /* AT91RM9200 only */
|
|
|
|
#define MACB_RM9200_RMII_SIZE 1 /* AT91RM9200 only */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RBOF_OFFSET 14 /* Receive buffer offset */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RBOF_SIZE 2
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RLCE_OFFSET 16 /* Length field error frame
|
|
|
|
* discard
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RLCE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_DRFCS_OFFSET 17 /* FCS remove */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_DRFCS_SIZE 1
|
|
|
|
#define MACB_EFRHD_OFFSET 18
|
|
|
|
#define MACB_EFRHD_SIZE 1
|
|
|
|
#define MACB_IRXFCS_OFFSET 19
|
|
|
|
#define MACB_IRXFCS_SIZE 1
|
|
|
|
|
2011-03-09 16:22:54 +00:00
|
|
|
/* GEM specific NCFGR bitfields. */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_GBE_OFFSET 10 /* Gigabit mode enable */
|
2012-10-31 06:04:50 +00:00
|
|
|
#define GEM_GBE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_CLK_OFFSET 18 /* MDC clock division */
|
2011-03-09 16:22:54 +00:00
|
|
|
#define GEM_CLK_SIZE 3
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_DBW_OFFSET 21 /* Data bus width */
|
2011-03-09 16:29:59 +00:00
|
|
|
#define GEM_DBW_SIZE 2
|
2014-07-24 11:51:01 +00:00
|
|
|
#define GEM_RXCOEN_OFFSET 24
|
|
|
|
#define GEM_RXCOEN_SIZE 1
|
2011-03-09 16:29:59 +00:00
|
|
|
|
|
|
|
/* Constants for data bus width. */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_DBW32 0 /* 32 bit AMBA AHB data bus
|
|
|
|
* width
|
|
|
|
*/
|
|
|
|
#define GEM_DBW64 1 /* 64 bit AMBA AHB data bus
|
|
|
|
* width
|
|
|
|
*/
|
|
|
|
#define GEM_DBW128 2 /* 128 bit AMBA AHB data bus
|
|
|
|
* width
|
|
|
|
*/
|
2011-03-09 16:29:59 +00:00
|
|
|
|
2011-03-14 17:38:30 +00:00
|
|
|
/* Bitfields in DMACFG. */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_FBLDO_OFFSET 0 /* AHB fixed burst length for
|
|
|
|
* DMA data operations
|
|
|
|
*/
|
2012-11-23 03:49:01 +00:00
|
|
|
#define GEM_FBLDO_SIZE 5
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_ENDIA_OFFSET 7 /* AHB endian swap mode enable
|
|
|
|
* for packet data accesses
|
|
|
|
*/
|
2013-03-27 23:07:06 +00:00
|
|
|
#define GEM_ENDIA_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_RXBMS_OFFSET 8 /* Receiver packet buffer
|
|
|
|
* memory size select
|
|
|
|
*/
|
2012-11-23 03:49:01 +00:00
|
|
|
#define GEM_RXBMS_SIZE 2
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_TXPBMS_OFFSET 10 /* Transmitter packet buffer
|
|
|
|
* memory size select
|
|
|
|
*/
|
2012-11-23 03:49:01 +00:00
|
|
|
#define GEM_TXPBMS_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_TXCOEN_OFFSET 11 /* Transmitter IP, TCP and
|
|
|
|
* UDP checksum generation
|
|
|
|
* offload enable
|
|
|
|
*/
|
2012-11-23 03:49:01 +00:00
|
|
|
#define GEM_TXCOEN_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_RXBS_OFFSET 16 /* DMA receive buffer size in
|
|
|
|
* AHB system memory
|
|
|
|
*/
|
2011-03-14 17:38:30 +00:00
|
|
|
#define GEM_RXBS_SIZE 8
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_DDRP_OFFSET 24 /* disc_when_no_ahb */
|
2012-11-23 03:49:01 +00:00
|
|
|
#define GEM_DDRP_SIZE 1
|
|
|
|
|
2011-03-14 17:38:30 +00:00
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Bitfields in NSR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_NSR_LINK_OFFSET 0 /* pcs_link_state */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_NSR_LINK_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_MDIO_OFFSET 1 /* status of the mdio_in
|
|
|
|
* pin
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_MDIO_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_IDLE_OFFSET 2 /* The PHY management logic is
|
|
|
|
* idle (i.e. has completed)
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_IDLE_SIZE 1
|
|
|
|
|
|
|
|
/* Bitfields in TSR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_UBR_OFFSET 0 /* Used bit read */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_UBR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_COL_OFFSET 1 /* Collision occurred */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_COL_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TSR_RLE_OFFSET 2 /* Retry limit exceeded */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TSR_RLE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TGO_OFFSET 3 /* Transmit go */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TGO_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_BEX_OFFSET 4 /* Transmit frame corruption
|
|
|
|
* due to AHB error
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_BEX_SIZE 1
|
2012-10-18 11:01:06 +00:00
|
|
|
#define MACB_RM9200_BNQ_OFFSET 4 /* AT91RM9200 only */
|
|
|
|
#define MACB_RM9200_BNQ_SIZE 1 /* AT91RM9200 only */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_COMP_OFFSET 5 /* Trnasmit complete */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_COMP_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_UND_OFFSET 6 /* Trnasmit under run */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_UND_SIZE 1
|
|
|
|
|
|
|
|
/* Bitfields in RSR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_BNA_OFFSET 0 /* Buffer not available */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_BNA_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_REC_OFFSET 1 /* Frame received */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_REC_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_OVR_OFFSET 2 /* Receive overrun */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_OVR_SIZE 1
|
|
|
|
|
|
|
|
/* Bitfields in ISR/IER/IDR/IMR */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_MFD_OFFSET 0 /* Management frame sent */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_MFD_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RCOMP_OFFSET 1 /* Receive complete */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RCOMP_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RXUBR_OFFSET 2 /* RX used bit read */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RXUBR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TXUBR_OFFSET 3 /* TX used bit read */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TXUBR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_ISR_TUND_OFFSET 4 /* Enable trnasmit buffer
|
|
|
|
* under run interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_ISR_TUND_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_ISR_RLE_OFFSET 5 /* Enable retry limit exceeded
|
|
|
|
* or late collision interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_ISR_RLE_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TXERR_OFFSET 6 /* Enable transmit frame
|
|
|
|
* corruption due to AHB error
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TXERR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_TCOMP_OFFSET 7 /* Enable transmit complete
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TCOMP_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_ISR_LINK_OFFSET 9 /* Enable link change
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_ISR_LINK_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_ISR_ROVR_OFFSET 10 /* Enable receive overrun
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_ISR_ROVR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_HRESP_OFFSET 11 /* Enable hrsep not OK
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_HRESP_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_PFR_OFFSET 12 /* Enable pause frame with
|
|
|
|
* non-zero pause quantum
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_PFR_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_PTZ_OFFSET 13 /* Enable pause time zero
|
|
|
|
* interrupt
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_PTZ_SIZE 1
|
|
|
|
|
|
|
|
/* Bitfields in MAN */
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_DATA_OFFSET 0 /* data */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_DATA_SIZE 16
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_CODE_OFFSET 16 /* Must be written to 10 */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_CODE_SIZE 2
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_REGA_OFFSET 18 /* Register address */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_REGA_SIZE 5
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_PHYA_OFFSET 23 /* PHY address */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_PHYA_SIZE 5
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_RW_OFFSET 28 /* Operation. 10 is read. 01
|
|
|
|
* is write.
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_RW_SIZE 2
|
2015-01-13 22:15:50 +00:00
|
|
|
#define MACB_SOF_OFFSET 30 /* Must be written to 1 for
|
|
|
|
* Clause 22 operation
|
|
|
|
*/
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_SOF_SIZE 2
|
|
|
|
|
2007-02-07 15:40:44 +00:00
|
|
|
/* Bitfields in USRIO (AVR32) */
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_MII_OFFSET 0
|
|
|
|
#define MACB_MII_SIZE 1
|
|
|
|
#define MACB_EAM_OFFSET 1
|
|
|
|
#define MACB_EAM_SIZE 1
|
|
|
|
#define MACB_TX_PAUSE_OFFSET 2
|
|
|
|
#define MACB_TX_PAUSE_SIZE 1
|
|
|
|
#define MACB_TX_PAUSE_ZERO_OFFSET 3
|
|
|
|
#define MACB_TX_PAUSE_ZERO_SIZE 1
|
|
|
|
|
2007-02-07 15:40:44 +00:00
|
|
|
/* Bitfields in USRIO (AT91) */
|
|
|
|
#define MACB_RMII_OFFSET 0
|
|
|
|
#define MACB_RMII_SIZE 1
|
2015-01-13 22:15:50 +00:00
|
|
|
#define GEM_RGMII_OFFSET 0 /* GEM gigabit mode */
|
2012-10-31 06:04:50 +00:00
|
|
|
#define GEM_RGMII_SIZE 1
|
2007-02-07 15:40:44 +00:00
|
|
|
#define MACB_CLKEN_OFFSET 1
|
|
|
|
#define MACB_CLKEN_SIZE 1
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Bitfields in WOL */
|
|
|
|
#define MACB_IP_OFFSET 0
|
|
|
|
#define MACB_IP_SIZE 16
|
|
|
|
#define MACB_MAG_OFFSET 16
|
|
|
|
#define MACB_MAG_SIZE 1
|
|
|
|
#define MACB_ARP_OFFSET 17
|
|
|
|
#define MACB_ARP_SIZE 1
|
|
|
|
#define MACB_SA1_OFFSET 18
|
|
|
|
#define MACB_SA1_SIZE 1
|
|
|
|
#define MACB_WOL_MTI_OFFSET 19
|
|
|
|
#define MACB_WOL_MTI_SIZE 1
|
|
|
|
|
2011-11-08 10:12:32 +00:00
|
|
|
/* Bitfields in MID */
|
|
|
|
#define MACB_IDNUM_OFFSET 16
|
|
|
|
#define MACB_IDNUM_SIZE 16
|
|
|
|
#define MACB_REV_OFFSET 0
|
|
|
|
#define MACB_REV_SIZE 16
|
|
|
|
|
2011-03-09 16:29:59 +00:00
|
|
|
/* Bitfields in DCFG1. */
|
2013-05-14 03:00:16 +00:00
|
|
|
#define GEM_IRQCOR_OFFSET 23
|
|
|
|
#define GEM_IRQCOR_SIZE 1
|
2011-03-09 16:29:59 +00:00
|
|
|
#define GEM_DBWDEF_OFFSET 25
|
|
|
|
#define GEM_DBWDEF_SIZE 3
|
|
|
|
|
2014-07-24 11:50:58 +00:00
|
|
|
/* Bitfields in DCFG2. */
|
|
|
|
#define GEM_RX_PKT_BUFF_OFFSET 20
|
|
|
|
#define GEM_RX_PKT_BUFF_SIZE 1
|
|
|
|
#define GEM_TX_PKT_BUFF_OFFSET 21
|
|
|
|
#define GEM_TX_PKT_BUFF_SIZE 1
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Constants for CLK */
|
|
|
|
#define MACB_CLK_DIV8 0
|
|
|
|
#define MACB_CLK_DIV16 1
|
|
|
|
#define MACB_CLK_DIV32 2
|
|
|
|
#define MACB_CLK_DIV64 3
|
|
|
|
|
2011-03-09 16:22:54 +00:00
|
|
|
/* GEM specific constants for CLK. */
|
|
|
|
#define GEM_CLK_DIV8 0
|
|
|
|
#define GEM_CLK_DIV16 1
|
|
|
|
#define GEM_CLK_DIV32 2
|
|
|
|
#define GEM_CLK_DIV48 3
|
|
|
|
#define GEM_CLK_DIV64 4
|
|
|
|
#define GEM_CLK_DIV96 5
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Constants for MAN register */
|
|
|
|
#define MACB_MAN_SOF 1
|
|
|
|
#define MACB_MAN_WRITE 1
|
|
|
|
#define MACB_MAN_READ 2
|
|
|
|
#define MACB_MAN_CODE 2
|
|
|
|
|
2013-05-14 03:00:16 +00:00
|
|
|
/* Capability mask bits */
|
2014-07-24 11:50:58 +00:00
|
|
|
#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001
|
|
|
|
#define MACB_CAPS_FIFO_MODE 0x10000000
|
|
|
|
#define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000
|
2014-07-24 11:50:59 +00:00
|
|
|
#define MACB_CAPS_SG_DISABLED 0x40000000
|
2014-07-24 11:50:58 +00:00
|
|
|
#define MACB_CAPS_MACB_IS_GEM 0x80000000
|
2013-05-14 03:00:16 +00:00
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Bit manipulation macros */
|
|
|
|
#define MACB_BIT(name) \
|
|
|
|
(1 << MACB_##name##_OFFSET)
|
|
|
|
#define MACB_BF(name,value) \
|
|
|
|
(((value) & ((1 << MACB_##name##_SIZE) - 1)) \
|
|
|
|
<< MACB_##name##_OFFSET)
|
|
|
|
#define MACB_BFEXT(name,value)\
|
|
|
|
(((value) >> MACB_##name##_OFFSET) \
|
|
|
|
& ((1 << MACB_##name##_SIZE) - 1))
|
|
|
|
#define MACB_BFINS(name,value,old) \
|
|
|
|
(((old) & ~(((1 << MACB_##name##_SIZE) - 1) \
|
|
|
|
<< MACB_##name##_OFFSET)) \
|
|
|
|
| MACB_BF(name,value))
|
|
|
|
|
2011-11-08 10:12:32 +00:00
|
|
|
#define GEM_BIT(name) \
|
|
|
|
(1 << GEM_##name##_OFFSET)
|
|
|
|
#define GEM_BF(name, value) \
|
|
|
|
(((value) & ((1 << GEM_##name##_SIZE) - 1)) \
|
|
|
|
<< GEM_##name##_OFFSET)
|
|
|
|
#define GEM_BFEXT(name, value)\
|
|
|
|
(((value) >> GEM_##name##_OFFSET) \
|
|
|
|
& ((1 << GEM_##name##_SIZE) - 1))
|
|
|
|
#define GEM_BFINS(name, value, old) \
|
|
|
|
(((old) & ~(((1 << GEM_##name##_SIZE) - 1) \
|
|
|
|
<< GEM_##name##_OFFSET)) \
|
|
|
|
| GEM_BF(name, value))
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
/* Register access macros */
|
|
|
|
#define macb_readl(port,reg) \
|
2006-12-08 13:38:30 +00:00
|
|
|
__raw_readl((port)->regs + MACB_##reg)
|
2006-11-09 13:51:17 +00:00
|
|
|
#define macb_writel(port,reg,value) \
|
2006-12-08 13:38:30 +00:00
|
|
|
__raw_writel((value), (port)->regs + MACB_##reg)
|
2011-11-08 10:12:32 +00:00
|
|
|
#define gem_readl(port, reg) \
|
|
|
|
__raw_readl((port)->regs + GEM_##reg)
|
|
|
|
#define gem_writel(port, reg, value) \
|
|
|
|
__raw_writel((value), (port)->regs + GEM_##reg)
|
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12 12:26:44 +00:00
|
|
|
#define queue_readl(queue, reg) \
|
|
|
|
__raw_readl((queue)->bp->regs + (queue)->reg)
|
|
|
|
#define queue_writel(queue, reg, value) \
|
|
|
|
__raw_writel((value), (queue)->bp->regs + (queue)->reg)
|
2011-11-08 10:12:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Conditional GEM/MACB macros. These perform the operation to the correct
|
|
|
|
* register dependent on whether the device is a GEM or a MACB. For registers
|
|
|
|
* and bitfields that are common across both devices, use macb_{read,write}l
|
|
|
|
* to avoid the cost of the conditional.
|
|
|
|
*/
|
|
|
|
#define macb_or_gem_writel(__bp, __reg, __value) \
|
|
|
|
({ \
|
|
|
|
if (macb_is_gem((__bp))) \
|
|
|
|
gem_writel((__bp), __reg, __value); \
|
|
|
|
else \
|
|
|
|
macb_writel((__bp), __reg, __value); \
|
|
|
|
})
|
|
|
|
|
|
|
|
#define macb_or_gem_readl(__bp, __reg) \
|
|
|
|
({ \
|
|
|
|
u32 __v; \
|
|
|
|
if (macb_is_gem((__bp))) \
|
|
|
|
__v = gem_readl((__bp), __reg); \
|
|
|
|
else \
|
|
|
|
__v = macb_readl((__bp), __reg); \
|
|
|
|
__v; \
|
|
|
|
})
|
2006-11-09 13:51:17 +00:00
|
|
|
|
2012-10-31 06:04:55 +00:00
|
|
|
/**
|
|
|
|
* struct macb_dma_desc - Hardware DMA descriptor
|
|
|
|
* @addr: DMA address of data buffer
|
|
|
|
* @ctrl: Control and status bits
|
|
|
|
*/
|
|
|
|
struct macb_dma_desc {
|
2006-11-09 13:51:17 +00:00
|
|
|
u32 addr;
|
|
|
|
u32 ctrl;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* DMA descriptor bitfields */
|
|
|
|
#define MACB_RX_USED_OFFSET 0
|
|
|
|
#define MACB_RX_USED_SIZE 1
|
|
|
|
#define MACB_RX_WRAP_OFFSET 1
|
|
|
|
#define MACB_RX_WRAP_SIZE 1
|
|
|
|
#define MACB_RX_WADDR_OFFSET 2
|
|
|
|
#define MACB_RX_WADDR_SIZE 30
|
|
|
|
|
|
|
|
#define MACB_RX_FRMLEN_OFFSET 0
|
|
|
|
#define MACB_RX_FRMLEN_SIZE 12
|
|
|
|
#define MACB_RX_OFFSET_OFFSET 12
|
|
|
|
#define MACB_RX_OFFSET_SIZE 2
|
|
|
|
#define MACB_RX_SOF_OFFSET 14
|
|
|
|
#define MACB_RX_SOF_SIZE 1
|
|
|
|
#define MACB_RX_EOF_OFFSET 15
|
|
|
|
#define MACB_RX_EOF_SIZE 1
|
|
|
|
#define MACB_RX_CFI_OFFSET 16
|
|
|
|
#define MACB_RX_CFI_SIZE 1
|
|
|
|
#define MACB_RX_VLAN_PRI_OFFSET 17
|
|
|
|
#define MACB_RX_VLAN_PRI_SIZE 3
|
|
|
|
#define MACB_RX_PRI_TAG_OFFSET 20
|
|
|
|
#define MACB_RX_PRI_TAG_SIZE 1
|
|
|
|
#define MACB_RX_VLAN_TAG_OFFSET 21
|
|
|
|
#define MACB_RX_VLAN_TAG_SIZE 1
|
|
|
|
#define MACB_RX_TYPEID_MATCH_OFFSET 22
|
|
|
|
#define MACB_RX_TYPEID_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_SA4_MATCH_OFFSET 23
|
|
|
|
#define MACB_RX_SA4_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_SA3_MATCH_OFFSET 24
|
|
|
|
#define MACB_RX_SA3_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_SA2_MATCH_OFFSET 25
|
|
|
|
#define MACB_RX_SA2_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_SA1_MATCH_OFFSET 26
|
|
|
|
#define MACB_RX_SA1_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_EXT_MATCH_OFFSET 28
|
|
|
|
#define MACB_RX_EXT_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_UHASH_MATCH_OFFSET 29
|
|
|
|
#define MACB_RX_UHASH_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_MHASH_MATCH_OFFSET 30
|
|
|
|
#define MACB_RX_MHASH_MATCH_SIZE 1
|
|
|
|
#define MACB_RX_BROADCAST_OFFSET 31
|
|
|
|
#define MACB_RX_BROADCAST_SIZE 1
|
|
|
|
|
2014-07-24 11:51:01 +00:00
|
|
|
/* RX checksum offload disabled: bit 24 clear in NCFGR */
|
|
|
|
#define GEM_RX_TYPEID_MATCH_OFFSET 22
|
|
|
|
#define GEM_RX_TYPEID_MATCH_SIZE 2
|
|
|
|
|
|
|
|
/* RX checksum offload enabled: bit 24 set in NCFGR */
|
|
|
|
#define GEM_RX_CSUM_OFFSET 22
|
|
|
|
#define GEM_RX_CSUM_SIZE 2
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
#define MACB_TX_FRMLEN_OFFSET 0
|
|
|
|
#define MACB_TX_FRMLEN_SIZE 11
|
|
|
|
#define MACB_TX_LAST_OFFSET 15
|
|
|
|
#define MACB_TX_LAST_SIZE 1
|
|
|
|
#define MACB_TX_NOCRC_OFFSET 16
|
|
|
|
#define MACB_TX_NOCRC_SIZE 1
|
|
|
|
#define MACB_TX_BUF_EXHAUSTED_OFFSET 27
|
|
|
|
#define MACB_TX_BUF_EXHAUSTED_SIZE 1
|
|
|
|
#define MACB_TX_UNDERRUN_OFFSET 28
|
|
|
|
#define MACB_TX_UNDERRUN_SIZE 1
|
|
|
|
#define MACB_TX_ERROR_OFFSET 29
|
|
|
|
#define MACB_TX_ERROR_SIZE 1
|
|
|
|
#define MACB_TX_WRAP_OFFSET 30
|
|
|
|
#define MACB_TX_WRAP_SIZE 1
|
|
|
|
#define MACB_TX_USED_OFFSET 31
|
|
|
|
#define MACB_TX_USED_SIZE 1
|
|
|
|
|
2014-07-24 11:50:59 +00:00
|
|
|
#define GEM_TX_FRMLEN_OFFSET 0
|
|
|
|
#define GEM_TX_FRMLEN_SIZE 14
|
|
|
|
|
2014-07-24 11:51:01 +00:00
|
|
|
/* Buffer descriptor constants */
|
|
|
|
#define GEM_RX_CSUM_NONE 0
|
|
|
|
#define GEM_RX_CSUM_IP_ONLY 1
|
|
|
|
#define GEM_RX_CSUM_IP_TCP 2
|
|
|
|
#define GEM_RX_CSUM_IP_UDP 3
|
|
|
|
|
|
|
|
/* limit RX checksum offload to TCP and UDP packets */
|
|
|
|
#define GEM_RX_CSUM_CHECKED_MASK 2
|
|
|
|
|
2012-10-31 06:04:55 +00:00
|
|
|
/**
|
|
|
|
* struct macb_tx_skb - data about an skb which is being transmitted
|
2014-07-24 11:50:59 +00:00
|
|
|
* @skb: skb currently being transmitted, only set for the last buffer
|
|
|
|
* of the frame
|
|
|
|
* @mapping: DMA address of the skb's fragment buffer
|
|
|
|
* @size: size of the DMA mapped buffer
|
|
|
|
* @mapped_as_page: true when buffer was mapped with skb_frag_dma_map(),
|
|
|
|
* false when buffer was mapped with dma_map_single()
|
2012-10-31 06:04:55 +00:00
|
|
|
*/
|
|
|
|
struct macb_tx_skb {
|
2006-11-09 13:51:17 +00:00
|
|
|
struct sk_buff *skb;
|
|
|
|
dma_addr_t mapping;
|
2014-07-24 11:50:59 +00:00
|
|
|
size_t size;
|
|
|
|
bool mapped_as_page;
|
2006-11-09 13:51:17 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Hardware-collected statistics. Used when updating the network
|
|
|
|
* device stats by a periodic timer.
|
|
|
|
*/
|
|
|
|
struct macb_stats {
|
|
|
|
u32 rx_pause_frames;
|
|
|
|
u32 tx_ok;
|
|
|
|
u32 tx_single_cols;
|
|
|
|
u32 tx_multiple_cols;
|
|
|
|
u32 rx_ok;
|
|
|
|
u32 rx_fcs_errors;
|
|
|
|
u32 rx_align_errors;
|
|
|
|
u32 tx_deferred;
|
|
|
|
u32 tx_late_cols;
|
|
|
|
u32 tx_excessive_cols;
|
|
|
|
u32 tx_underruns;
|
|
|
|
u32 tx_carrier_errors;
|
|
|
|
u32 rx_resource_errors;
|
|
|
|
u32 rx_overruns;
|
|
|
|
u32 rx_symbol_errors;
|
|
|
|
u32 rx_oversize_pkts;
|
|
|
|
u32 rx_jabbers;
|
|
|
|
u32 rx_undersize_pkts;
|
|
|
|
u32 sqe_test_errors;
|
|
|
|
u32 rx_length_mismatch;
|
|
|
|
u32 tx_pause_frames;
|
|
|
|
};
|
|
|
|
|
2011-03-09 16:26:35 +00:00
|
|
|
struct gem_stats {
|
|
|
|
u32 tx_octets_31_0;
|
|
|
|
u32 tx_octets_47_32;
|
|
|
|
u32 tx_frames;
|
|
|
|
u32 tx_broadcast_frames;
|
|
|
|
u32 tx_multicast_frames;
|
|
|
|
u32 tx_pause_frames;
|
|
|
|
u32 tx_64_byte_frames;
|
|
|
|
u32 tx_65_127_byte_frames;
|
|
|
|
u32 tx_128_255_byte_frames;
|
|
|
|
u32 tx_256_511_byte_frames;
|
|
|
|
u32 tx_512_1023_byte_frames;
|
|
|
|
u32 tx_1024_1518_byte_frames;
|
|
|
|
u32 tx_greater_than_1518_byte_frames;
|
|
|
|
u32 tx_underrun;
|
|
|
|
u32 tx_single_collision_frames;
|
|
|
|
u32 tx_multiple_collision_frames;
|
|
|
|
u32 tx_excessive_collisions;
|
|
|
|
u32 tx_late_collisions;
|
|
|
|
u32 tx_deferred_frames;
|
|
|
|
u32 tx_carrier_sense_errors;
|
|
|
|
u32 rx_octets_31_0;
|
|
|
|
u32 rx_octets_47_32;
|
|
|
|
u32 rx_frames;
|
|
|
|
u32 rx_broadcast_frames;
|
|
|
|
u32 rx_multicast_frames;
|
|
|
|
u32 rx_pause_frames;
|
|
|
|
u32 rx_64_byte_frames;
|
|
|
|
u32 rx_65_127_byte_frames;
|
|
|
|
u32 rx_128_255_byte_frames;
|
|
|
|
u32 rx_256_511_byte_frames;
|
|
|
|
u32 rx_512_1023_byte_frames;
|
|
|
|
u32 rx_1024_1518_byte_frames;
|
|
|
|
u32 rx_greater_than_1518_byte_frames;
|
|
|
|
u32 rx_undersized_frames;
|
|
|
|
u32 rx_oversize_frames;
|
|
|
|
u32 rx_jabbers;
|
|
|
|
u32 rx_frame_check_sequence_errors;
|
|
|
|
u32 rx_length_field_frame_errors;
|
|
|
|
u32 rx_symbol_errors;
|
|
|
|
u32 rx_alignment_errors;
|
|
|
|
u32 rx_resource_errors;
|
|
|
|
u32 rx_overruns;
|
|
|
|
u32 rx_ip_header_checksum_errors;
|
|
|
|
u32 rx_tcp_checksum_errors;
|
|
|
|
u32 rx_udp_checksum_errors;
|
|
|
|
};
|
|
|
|
|
2015-01-13 22:15:51 +00:00
|
|
|
/* Describes the name and offset of an individual statistic register, as
|
|
|
|
* returned by `ethtool -S`. Also describes which net_device_stats statistics
|
|
|
|
* this register should contribute to.
|
|
|
|
*/
|
|
|
|
struct gem_statistic {
|
|
|
|
char stat_string[ETH_GSTRING_LEN];
|
|
|
|
int offset;
|
|
|
|
u32 stat_bits;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Bitfield defs for net_device_stat statistics */
|
|
|
|
#define GEM_NDS_RXERR_OFFSET 0
|
|
|
|
#define GEM_NDS_RXLENERR_OFFSET 1
|
|
|
|
#define GEM_NDS_RXOVERERR_OFFSET 2
|
|
|
|
#define GEM_NDS_RXCRCERR_OFFSET 3
|
|
|
|
#define GEM_NDS_RXFRAMEERR_OFFSET 4
|
|
|
|
#define GEM_NDS_RXFIFOERR_OFFSET 5
|
|
|
|
#define GEM_NDS_TXERR_OFFSET 6
|
|
|
|
#define GEM_NDS_TXABORTEDERR_OFFSET 7
|
|
|
|
#define GEM_NDS_TXCARRIERERR_OFFSET 8
|
|
|
|
#define GEM_NDS_TXFIFOERR_OFFSET 9
|
|
|
|
#define GEM_NDS_COLLISIONS_OFFSET 10
|
|
|
|
|
|
|
|
#define GEM_STAT_TITLE(name, title) GEM_STAT_TITLE_BITS(name, title, 0)
|
|
|
|
#define GEM_STAT_TITLE_BITS(name, title, bits) { \
|
|
|
|
.stat_string = title, \
|
|
|
|
.offset = GEM_##name, \
|
|
|
|
.stat_bits = bits \
|
|
|
|
}
|
|
|
|
|
|
|
|
/* list of gem statistic registers. The names MUST match the
|
|
|
|
* corresponding GEM_* definitions.
|
|
|
|
*/
|
|
|
|
static const struct gem_statistic gem_statistics[] = {
|
|
|
|
GEM_STAT_TITLE(OCTTXL, "tx_octets"), /* OCTTXH combined with OCTTXL */
|
|
|
|
GEM_STAT_TITLE(TXCNT, "tx_frames"),
|
|
|
|
GEM_STAT_TITLE(TXBCCNT, "tx_broadcast_frames"),
|
|
|
|
GEM_STAT_TITLE(TXMCCNT, "tx_multicast_frames"),
|
|
|
|
GEM_STAT_TITLE(TXPAUSECNT, "tx_pause_frames"),
|
|
|
|
GEM_STAT_TITLE(TX64CNT, "tx_64_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX65CNT, "tx_65_127_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX128CNT, "tx_128_255_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX256CNT, "tx_256_511_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX512CNT, "tx_512_1023_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX1024CNT, "tx_1024_1518_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
|
|
|
|
GEM_STAT_TITLE_BITS(TXURUNCNT, "tx_underrun",
|
|
|
|
GEM_BIT(NDS_TXERR)|GEM_BIT(NDS_TXFIFOERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(SNGLCOLLCNT, "tx_single_collision_frames",
|
|
|
|
GEM_BIT(NDS_TXERR)|GEM_BIT(NDS_COLLISIONS)),
|
|
|
|
GEM_STAT_TITLE_BITS(MULTICOLLCNT, "tx_multiple_collision_frames",
|
|
|
|
GEM_BIT(NDS_TXERR)|GEM_BIT(NDS_COLLISIONS)),
|
|
|
|
GEM_STAT_TITLE_BITS(EXCESSCOLLCNT, "tx_excessive_collisions",
|
|
|
|
GEM_BIT(NDS_TXERR)|
|
|
|
|
GEM_BIT(NDS_TXABORTEDERR)|
|
|
|
|
GEM_BIT(NDS_COLLISIONS)),
|
|
|
|
GEM_STAT_TITLE_BITS(LATECOLLCNT, "tx_late_collisions",
|
|
|
|
GEM_BIT(NDS_TXERR)|GEM_BIT(NDS_COLLISIONS)),
|
|
|
|
GEM_STAT_TITLE(TXDEFERCNT, "tx_deferred_frames"),
|
|
|
|
GEM_STAT_TITLE_BITS(TXCSENSECNT, "tx_carrier_sense_errors",
|
|
|
|
GEM_BIT(NDS_TXERR)|GEM_BIT(NDS_COLLISIONS)),
|
|
|
|
GEM_STAT_TITLE(OCTRXL, "rx_octets"), /* OCTRXH combined with OCTRXL */
|
|
|
|
GEM_STAT_TITLE(RXCNT, "rx_frames"),
|
|
|
|
GEM_STAT_TITLE(RXBROADCNT, "rx_broadcast_frames"),
|
|
|
|
GEM_STAT_TITLE(RXMULTICNT, "rx_multicast_frames"),
|
|
|
|
GEM_STAT_TITLE(RXPAUSECNT, "rx_pause_frames"),
|
|
|
|
GEM_STAT_TITLE(RX64CNT, "rx_64_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX65CNT, "rx_65_127_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX128CNT, "rx_128_255_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX256CNT, "rx_256_511_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX512CNT, "rx_512_1023_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX1024CNT, "rx_1024_1518_byte_frames"),
|
|
|
|
GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
|
|
|
|
GEM_STAT_TITLE_BITS(RXUNDRCNT, "rx_undersized_frames",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXLENERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXOVRCNT, "rx_oversize_frames",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXLENERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXJABCNT, "rx_jabbers",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXLENERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXFCSCNT, "rx_frame_check_sequence_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXCRCERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXLENGTHCNT, "rx_length_field_frame_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXSYMBCNT, "rx_symbol_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXFRAMEERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXALIGNCNT, "rx_alignment_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXOVERERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXRESERRCNT, "rx_resource_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXOVERERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXORCNT, "rx_overruns",
|
|
|
|
GEM_BIT(NDS_RXERR)|GEM_BIT(NDS_RXFIFOERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXIPCCNT, "rx_ip_header_checksum_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXTCPCCNT, "rx_tcp_checksum_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)),
|
|
|
|
GEM_STAT_TITLE_BITS(RXUDPCCNT, "rx_udp_checksum_errors",
|
|
|
|
GEM_BIT(NDS_RXERR)),
|
|
|
|
};
|
|
|
|
|
|
|
|
#define GEM_STATS_LEN ARRAY_SIZE(gem_statistics)
|
|
|
|
|
2013-06-04 21:57:12 +00:00
|
|
|
struct macb;
|
|
|
|
|
|
|
|
struct macb_or_gem_ops {
|
|
|
|
int (*mog_alloc_rx_buffers)(struct macb *bp);
|
|
|
|
void (*mog_free_rx_buffers)(struct macb *bp);
|
|
|
|
void (*mog_init_rings)(struct macb *bp);
|
|
|
|
int (*mog_rx)(struct macb *bp, int budget);
|
|
|
|
};
|
|
|
|
|
2014-07-24 11:50:58 +00:00
|
|
|
struct macb_config {
|
|
|
|
u32 caps;
|
|
|
|
unsigned int dma_burst_length;
|
|
|
|
};
|
|
|
|
|
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12 12:26:44 +00:00
|
|
|
struct macb_queue {
|
|
|
|
struct macb *bp;
|
|
|
|
int irq;
|
|
|
|
|
|
|
|
unsigned int ISR;
|
|
|
|
unsigned int IER;
|
|
|
|
unsigned int IDR;
|
|
|
|
unsigned int IMR;
|
|
|
|
unsigned int TBQP;
|
|
|
|
|
|
|
|
unsigned int tx_head, tx_tail;
|
|
|
|
struct macb_dma_desc *tx_ring;
|
|
|
|
struct macb_tx_skb *tx_skb;
|
|
|
|
dma_addr_t tx_ring_dma;
|
|
|
|
struct work_struct tx_error_task;
|
|
|
|
};
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
struct macb {
|
|
|
|
void __iomem *regs;
|
|
|
|
|
|
|
|
unsigned int rx_tail;
|
2013-06-04 21:57:12 +00:00
|
|
|
unsigned int rx_prepared_head;
|
2012-10-31 06:04:55 +00:00
|
|
|
struct macb_dma_desc *rx_ring;
|
2013-06-04 21:57:12 +00:00
|
|
|
struct sk_buff **rx_skbuff;
|
2006-11-09 13:51:17 +00:00
|
|
|
void *rx_buffers;
|
2013-06-04 21:57:11 +00:00
|
|
|
size_t rx_buffer_size;
|
2006-11-09 13:51:17 +00:00
|
|
|
|
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12 12:26:44 +00:00
|
|
|
unsigned int num_queues;
|
|
|
|
struct macb_queue queues[MACB_MAX_QUEUES];
|
2006-11-09 13:51:17 +00:00
|
|
|
|
|
|
|
spinlock_t lock;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
struct clk *pclk;
|
|
|
|
struct clk *hclk;
|
2013-12-11 00:07:23 +00:00
|
|
|
struct clk *tx_clk;
|
2006-11-09 13:51:17 +00:00
|
|
|
struct net_device *dev;
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 23:41:36 +00:00
|
|
|
struct napi_struct napi;
|
2006-11-09 13:51:17 +00:00
|
|
|
struct net_device_stats stats;
|
2011-03-09 16:26:35 +00:00
|
|
|
union {
|
|
|
|
struct macb_stats macb;
|
|
|
|
struct gem_stats gem;
|
|
|
|
} hw_stats;
|
2006-11-09 13:51:17 +00:00
|
|
|
|
|
|
|
dma_addr_t rx_ring_dma;
|
|
|
|
dma_addr_t rx_buffers_dma;
|
|
|
|
|
2013-06-04 21:57:12 +00:00
|
|
|
struct macb_or_gem_ops macbgem_ops;
|
|
|
|
|
2008-10-08 23:29:57 +00:00
|
|
|
struct mii_bus *mii_bus;
|
2007-07-12 17:07:24 +00:00
|
|
|
struct phy_device *phy_dev;
|
|
|
|
unsigned int link;
|
|
|
|
unsigned int speed;
|
|
|
|
unsigned int duplex;
|
2011-11-18 14:29:25 +00:00
|
|
|
|
2013-05-14 03:00:16 +00:00
|
|
|
u32 caps;
|
2014-07-24 11:50:58 +00:00
|
|
|
unsigned int dma_burst_length;
|
2013-05-14 03:00:16 +00:00
|
|
|
|
2011-11-18 14:29:25 +00:00
|
|
|
phy_interface_t phy_interface;
|
2012-10-18 11:01:10 +00:00
|
|
|
|
2012-11-07 08:14:55 +00:00
|
|
|
/* AT91RM9200 transmit */
|
2012-10-18 11:01:10 +00:00
|
|
|
struct sk_buff *skb; /* holds skb until xmit interrupt completes */
|
|
|
|
dma_addr_t skb_physaddr; /* phys addr from pci_map_single */
|
|
|
|
int skb_length; /* saved skb length for pci_unmap_single */
|
2014-07-24 11:50:59 +00:00
|
|
|
unsigned int max_tx_length;
|
2015-01-13 22:15:51 +00:00
|
|
|
|
|
|
|
u64 ethtool_stats[GEM_STATS_LEN];
|
2006-11-09 13:51:17 +00:00
|
|
|
};
|
|
|
|
|
2012-10-18 11:01:12 +00:00
|
|
|
extern const struct ethtool_ops macb_ethtool_ops;
|
|
|
|
|
|
|
|
int macb_mii_init(struct macb *bp);
|
|
|
|
int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
2012-11-07 08:14:54 +00:00
|
|
|
struct net_device_stats *macb_get_stats(struct net_device *dev);
|
2012-10-18 11:01:15 +00:00
|
|
|
void macb_set_rx_mode(struct net_device *dev);
|
2012-11-07 08:14:52 +00:00
|
|
|
void macb_set_hwaddr(struct macb *bp);
|
|
|
|
void macb_get_hwaddr(struct macb *bp);
|
2012-10-18 11:01:12 +00:00
|
|
|
|
2011-11-08 10:12:32 +00:00
|
|
|
static inline bool macb_is_gem(struct macb *bp)
|
|
|
|
{
|
2014-07-24 11:50:58 +00:00
|
|
|
return !!(bp->caps & MACB_CAPS_MACB_IS_GEM);
|
2011-11-08 10:12:32 +00:00
|
|
|
}
|
|
|
|
|
2006-11-09 13:51:17 +00:00
|
|
|
#endif /* _MACB_H */
|