linux/drivers/net/dsa/Makefile

obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm-sf2.o
bcm-sf2-objs			:= bcm_sf2.o bcm_sf2_cfp.o
obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
obj-y				+= b53/
obj-y				+= mv88e6xxx/
obj-$(CONFIG_NET_DSA_LOOP)	+= dsa_loop.o dsa_loop_bdinfo.o
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2011-11-27 17:08:33 +00:00			`obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o`
net: dsa: bcm_sf2: Fix build module Commit 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") added a new object to build: bcm_sf2_cfp.o, but in doing so, we essentially just built this object and no longer bcm_sf2.o. Fix this by creating a module named bcm-sf2.ko which links in bcm_sf2.o and bcm_sf2_cfp.o. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-01-31 03:17:16 +00:00			`obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o`
			`bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o`
net-next: dsa: add new driver for qca8xxx family This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-09-15 14:26:41 +00:00			`obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o`
net: dsa: b53: Add support for Broadcom RoboSwitch This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-06-10 01:23:53 +00:00			`obj-y += b53/`
net: dsa: mv88e6xxx: move driver in its own folder With the upcoming support for cross-chip operations and other mv88e6xxx enhancements, new files will be added. Similarly to mlxsw or b53, move mv88e6xxx files into their own folder. In the meantime, update the MAINTAINERS entry to please checkpatch.pl, by replacing the invalid 88E6352 entry with 88E6XXX, maintained by Andrew and myself. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-06-21 16:28:19 +00:00			`obj-y += mv88e6xxx/`
net: dsa: Mock-up driver This patch adds support for a DSA mock-up driver which essentially does the following: - registers/unregisters 4 fixed PHYs to the slave network devices - uses eth0 (configurable) as the master netdev - registers the switch as a fixed MDIO device against the fixed MDIO bus at address 31 - includes dynamic debug prints for dsa_switch_ops functions that can be enabled to get call traces This is a good way to test modular builds as well as exercise the DSA APIs without requiring access to real hardware. This does not test the data-path, although this could be added later on. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-03-31 01:43:21 +00:00			`obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o dsa_loop_bdinfo.o`