linux/mm/zsmalloc.c

1936 lines
46 KiB
C
Raw Normal View History

/*
* zsmalloc memory allocator
*
* Copyright (C) 2011 Nitin Gupta
* Copyright (C) 2012, 2013 Minchan Kim
*
* This code is released using a dual license strategy: BSD/GPL
* You can choose the license that better fits your requirements.
*
* Released under the terms of 3-clause BSD License
* Released under the terms of GNU General Public License Version 2.0
*/
/*
* This allocator is designed for use with zram. Thus, the allocator is
* supposed to work well under low memory conditions. In particular, it
* never attempts higher order page allocation which is very likely to
* fail under memory pressure. On the other hand, if we just use single
* (0-order) pages, it would suffer from very high fragmentation --
* any object of size PAGE_SIZE/2 or larger would occupy an entire page.
* This was one of the major issues with its predecessor (xvmalloc).
*
* To overcome these issues, zsmalloc allocates a bunch of 0-order pages
* and links them together using various 'struct page' fields. These linked
* pages act as a single higher-order page i.e. an object can span 0-order
* page boundaries. The code refers to these linked pages as a single entity
* called zspage.
*
* For simplicity, zsmalloc can only allocate objects of size up to PAGE_SIZE
* since this satisfies the requirements of all its current users (in the
* worst case, page is incompressible and is thus stored "as-is" i.e. in
* uncompressed form). For allocation requests larger than this size, failure
* is returned (see zs_malloc).
*
* Additionally, zs_malloc() does not return a dereferenceable pointer.
* Instead, it returns an opaque handle (unsigned long) which encodes actual
* location of the allocated object. The reason for this indirection is that
* zsmalloc does not keep zspages permanently mapped since that would cause
* issues on 32-bit systems where the VA region for kernel space mappings
* is very small. So, before using the allocating memory, the object has to
* be mapped using zs_map_object() to get a usable pointer and subsequently
* unmapped using zs_unmap_object().
*
* Following is how we use various fields and flags of underlying
* struct page(s) to form a zspage.
*
* Usage of struct page fields:
* page->first_page: points to the first component (0-order) page
* page->index (union with page->freelist): offset of the first object
* starting in this page. For the first page, this is
* always 0, so we use this field (aka freelist) to point
* to the first free object in zspage.
* page->lru: links together all component pages (except the first page)
* of a zspage
*
* For _first_ page only:
*
* page->private (union with page->first_page): refers to the
* component page after the first page
* page->freelist: points to the first free object in zspage.
* Free objects are linked together using in-place
* metadata.
* page->objects: maximum number of objects we can store in this
* zspage (class->zspage_order * PAGE_SIZE / class->size)
* page->lru: links together first pages of various zspages.
* Basically forming list of zspages in a fullness group.
* page->mapping: class index and fullness group of the zspage
*
* Usage of struct page flags:
* PG_private: identifies the first component page
* PG_private2: identifies the last component page
*
*/
#ifdef CONFIG_ZSMALLOC_DEBUG
#define DEBUG
#endif
#include <linux/module.h>
#include <linux/kernel.h>
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/highmem.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
#include <linux/cpumask.h>
#include <linux/cpu.h>
#include <linux/vmalloc.h>
#include <linux/hardirq.h>
#include <linux/spinlock.h>
#include <linux/types.h>
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
#include <linux/debugfs.h>
zsmalloc: move it under mm This patch moves zsmalloc under mm directory. Before that, description will explain why we have needed custom allocator. Zsmalloc is a new slab-based memory allocator for storing compressed pages. It is designed for low fragmentation and high allocation success rate on large object, but <= PAGE_SIZE allocations. zsmalloc differs from the kernel slab allocator in two primary ways to achieve these design goals. zsmalloc never requires high order page allocations to back slabs, or "size classes" in zsmalloc terms. Instead it allows multiple single-order pages to be stitched together into a "zspage" which backs the slab. This allows for higher allocation success rate under memory pressure. Also, zsmalloc allows objects to span page boundaries within the zspage. This allows for lower fragmentation than could be had with the kernel slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the kernel slab allocator, if a page compresses to 60% of it original size, the memory savings gained through compression is lost in fragmentation because another object of the same size can't be stored in the leftover space. This ability to span pages results in zsmalloc allocations not being directly addressable by the user. The user is given an non-dereferencable handle in response to an allocation request. That handle must be mapped, using zs_map_object(), which returns a pointer to the mapped region that can be used. The mapping is necessary since the object data may reside in two different noncontigious pages. The zsmalloc fulfills the allocation needs for zram perfectly [sjenning@linux.vnet.ibm.com: borrow Seth's quote] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30 23:45:50 +00:00
#include <linux/zsmalloc.h>
#include <linux/zpool.h>
/*
* This must be power of 2 and greater than of equal to sizeof(link_free).
* These two conditions ensure that any 'struct link_free' itself doesn't
* span more than 1 page which avoids complex case of mapping 2 pages simply
* to restore link_free pointer values.
*/
#define ZS_ALIGN 8
/*
* A single 'zspage' is composed of up to 2^N discontiguous 0-order (single)
* pages. ZS_MAX_ZSPAGE_ORDER defines upper limit on N.
*/
#define ZS_MAX_ZSPAGE_ORDER 2
#define ZS_MAX_PAGES_PER_ZSPAGE (_AC(1, UL) << ZS_MAX_ZSPAGE_ORDER)
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
#define ZS_HANDLE_SIZE (sizeof(unsigned long))
/*
* Object location (<PFN>, <obj_idx>) is encoded as
* as single (unsigned long) handle value.
*
* Note that object index <obj_idx> is relative to system
* page <PFN> it is stored in, so for each sub-page belonging
* to a zspage, obj_idx starts with 0.
*
* This is made more complicated by various memory models and PAE.
*/
#ifndef MAX_PHYSMEM_BITS
#ifdef CONFIG_HIGHMEM64G
#define MAX_PHYSMEM_BITS 36
#else /* !CONFIG_HIGHMEM64G */
/*
* If this definition of MAX_PHYSMEM_BITS is used, OBJ_INDEX_BITS will just
* be PAGE_SHIFT
*/
#define MAX_PHYSMEM_BITS BITS_PER_LONG
#endif
#endif
#define _PFN_BITS (MAX_PHYSMEM_BITS - PAGE_SHIFT)
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
/*
* Memory for allocating for handle keeps object position by
* encoding <page, obj_idx> and the encoded value has a room
* in least bit(ie, look at obj_to_location).
* We use the bit to synchronize between object access by
* user and migration.
*/
#define HANDLE_PIN_BIT 0
/*
* Head in allocated object should have OBJ_ALLOCATED_TAG
* to identify the object was allocated or not.
* It's okay to add the status bit in the least bit because
* header keeps handle which is 4byte-aligned address so we
* have room for two bit at least.
*/
#define OBJ_ALLOCATED_TAG 1
#define OBJ_TAG_BITS 1
#define OBJ_INDEX_BITS (BITS_PER_LONG - _PFN_BITS - OBJ_TAG_BITS)
#define OBJ_INDEX_MASK ((_AC(1, UL) << OBJ_INDEX_BITS) - 1)
#define MAX(a, b) ((a) >= (b) ? (a) : (b))
/* ZS_MIN_ALLOC_SIZE must be multiple of ZS_ALIGN */
#define ZS_MIN_ALLOC_SIZE \
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
/* each chunk includes extra space to keep handle */
#define ZS_MAX_ALLOC_SIZE (PAGE_SIZE + ZS_HANDLE_SIZE)
/*
* On systems with 4K page size, this gives 255 size classes! There is a
* trader-off here:
* - Large number of size classes is potentially wasteful as free page are
* spread across these classes
* - Small number of size classes causes large internal fragmentation
* - Probably its better to use specific size classes (empirically
* determined). NOTE: all those class sizes must be set as multiple of
* ZS_ALIGN to make sure link_free itself never has to span 2 pages.
*
* ZS_MIN_ALLOC_SIZE and ZS_SIZE_CLASS_DELTA must be multiple of ZS_ALIGN
* (reason above)
*/
#define ZS_SIZE_CLASS_DELTA (PAGE_SIZE >> 8)
/*
* We do not maintain any list for completely empty or full pages
*/
enum fullness_group {
ZS_ALMOST_FULL,
ZS_ALMOST_EMPTY,
_ZS_NR_FULLNESS_GROUPS,
ZS_EMPTY,
ZS_FULL
};
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
enum zs_stat_type {
OBJ_ALLOCATED,
OBJ_USED,
NR_ZS_STAT_TYPE,
};
#ifdef CONFIG_ZSMALLOC_STAT
static struct dentry *zs_stat_root;
struct zs_size_stat {
unsigned long objs[NR_ZS_STAT_TYPE];
};
#endif
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
/*
* number of size_classes
*/
static int zs_size_classes;
/*
* We assign a page to ZS_ALMOST_EMPTY fullness group when:
* n <= N / f, where
* n = number of allocated objects
* N = total number of objects zspage can store
* f = fullness_threshold_frac
*
* Similarly, we assign zspage to:
* ZS_ALMOST_FULL when n > N / f
* ZS_EMPTY when n == 0
* ZS_FULL when n == N
*
* (see: fix_fullness_group())
*/
static const int fullness_threshold_frac = 4;
struct size_class {
/*
* Size of objects stored in this class. Must be multiple
* of ZS_ALIGN.
*/
int size;
unsigned int index;
/* Number of PAGE_SIZE sized pages to combine to form a 'zspage' */
int pages_per_zspage;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
#ifdef CONFIG_ZSMALLOC_STAT
struct zs_size_stat stats;
#endif
spinlock_t lock;
struct page *fullness_list[_ZS_NR_FULLNESS_GROUPS];
};
/*
* Placed within free objects to form a singly linked list.
* For every zspage, first_page->freelist gives head of this list.
*
* This must be power of 2 and less than or equal to ZS_ALIGN
*/
struct link_free {
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
union {
/*
* Position of next free chunk (encodes <PFN, obj_idx>)
* It's valid for non-allocated object
*/
void *next;
/*
* Handle of allocated object.
*/
unsigned long handle;
};
};
struct zs_pool {
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
char *name;
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
struct size_class **size_class;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
struct kmem_cache *handle_cachep;
gfp_t flags; /* allocation flags used when growing pool */
zsmalloc: move pages_allocated to zs_pool Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:29:48 +00:00
atomic_long_t pages_allocated;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
#ifdef CONFIG_ZSMALLOC_STAT
struct dentry *stat_dentry;
#endif
};
/*
* A zspage's class index and fullness group
* are encoded in its (first)page->mapping
*/
#define CLASS_IDX_BITS 28
#define FULLNESS_BITS 4
#define CLASS_IDX_MASK ((1 << CLASS_IDX_BITS) - 1)
#define FULLNESS_MASK ((1 << FULLNESS_BITS) - 1)
struct mapping_area {
#ifdef CONFIG_PGTABLE_MAPPING
struct vm_struct *vm; /* vm area for mapping object that span pages */
#else
char *vm_buf; /* copy buffer for objects that span pages */
#endif
char *vm_addr; /* address of kmap_atomic()'ed pages */
enum zs_mapmode vm_mm; /* mapping mode */
};
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
static int create_handle_cache(struct zs_pool *pool)
{
pool->handle_cachep = kmem_cache_create("zs_handle", ZS_HANDLE_SIZE,
0, 0, NULL);
return pool->handle_cachep ? 0 : 1;
}
static void destroy_handle_cache(struct zs_pool *pool)
{
kmem_cache_destroy(pool->handle_cachep);
}
static unsigned long alloc_handle(struct zs_pool *pool)
{
return (unsigned long)kmem_cache_alloc(pool->handle_cachep,
pool->flags & ~__GFP_HIGHMEM);
}
static void free_handle(struct zs_pool *pool, unsigned long handle)
{
kmem_cache_free(pool->handle_cachep, (void *)handle);
}
static void record_obj(unsigned long handle, unsigned long obj)
{
*(unsigned long *)handle = obj;
}
/* zpool driver */
#ifdef CONFIG_ZPOOL
static void *zs_zpool_create(char *name, gfp_t gfp, struct zpool_ops *zpool_ops)
{
return zs_create_pool(name, gfp);
}
static void zs_zpool_destroy(void *pool)
{
zs_destroy_pool(pool);
}
static int zs_zpool_malloc(void *pool, size_t size, gfp_t gfp,
unsigned long *handle)
{
*handle = zs_malloc(pool, size);
return *handle ? 0 : -1;
}
static void zs_zpool_free(void *pool, unsigned long handle)
{
zs_free(pool, handle);
}
static int zs_zpool_shrink(void *pool, unsigned int pages,
unsigned int *reclaimed)
{
return -EINVAL;
}
static void *zs_zpool_map(void *pool, unsigned long handle,
enum zpool_mapmode mm)
{
enum zs_mapmode zs_mm;
switch (mm) {
case ZPOOL_MM_RO:
zs_mm = ZS_MM_RO;
break;
case ZPOOL_MM_WO:
zs_mm = ZS_MM_WO;
break;
case ZPOOL_MM_RW: /* fallthru */
default:
zs_mm = ZS_MM_RW;
break;
}
return zs_map_object(pool, handle, zs_mm);
}
static void zs_zpool_unmap(void *pool, unsigned long handle)
{
zs_unmap_object(pool, handle);
}
static u64 zs_zpool_total_size(void *pool)
{
return zs_get_total_pages(pool) << PAGE_SHIFT;
}
static struct zpool_driver zs_zpool_driver = {
.type = "zsmalloc",
.owner = THIS_MODULE,
.create = zs_zpool_create,
.destroy = zs_zpool_destroy,
.malloc = zs_zpool_malloc,
.free = zs_zpool_free,
.shrink = zs_zpool_shrink,
.map = zs_zpool_map,
.unmap = zs_zpool_unmap,
.total_size = zs_zpool_total_size,
};
MODULE_ALIAS("zpool-zsmalloc");
#endif /* CONFIG_ZPOOL */
/* per-cpu VM mapping areas for zspage accesses that cross page boundaries */
static DEFINE_PER_CPU(struct mapping_area, zs_map_area);
static int is_first_page(struct page *page)
{
return PagePrivate(page);
}
static int is_last_page(struct page *page)
{
return PagePrivate2(page);
}
static void get_zspage_mapping(struct page *page, unsigned int *class_idx,
enum fullness_group *fullness)
{
unsigned long m;
BUG_ON(!is_first_page(page));
m = (unsigned long)page->mapping;
*fullness = m & FULLNESS_MASK;
*class_idx = (m >> FULLNESS_BITS) & CLASS_IDX_MASK;
}
static void set_zspage_mapping(struct page *page, unsigned int class_idx,
enum fullness_group fullness)
{
unsigned long m;
BUG_ON(!is_first_page(page));
m = ((class_idx & CLASS_IDX_MASK) << FULLNESS_BITS) |
(fullness & FULLNESS_MASK);
page->mapping = (struct address_space *)m;
}
/*
* zsmalloc divides the pool into various size classes where each
* class maintains a list of zspages where each zspage is divided
* into equal sized chunks. Each allocation falls into one of these
* classes depending on its size. This function returns index of the
* size class which has chunk size big enough to hold the give size.
*/
static int get_size_class_index(int size)
{
int idx = 0;
if (likely(size > ZS_MIN_ALLOC_SIZE))
idx = DIV_ROUND_UP(size - ZS_MIN_ALLOC_SIZE,
ZS_SIZE_CLASS_DELTA);
return idx;
}
/*
* For each size class, zspages are divided into different groups
* depending on how "full" they are. This was done so that we could
* easily find empty or nearly empty zspages when we try to shrink
* the pool (not yet implemented). This function returns fullness
* status of the given page.
*/
static enum fullness_group get_fullness_group(struct page *page)
{
int inuse, max_objects;
enum fullness_group fg;
BUG_ON(!is_first_page(page));
inuse = page->inuse;
max_objects = page->objects;
if (inuse == 0)
fg = ZS_EMPTY;
else if (inuse == max_objects)
fg = ZS_FULL;
else if (inuse <= max_objects / fullness_threshold_frac)
fg = ZS_ALMOST_EMPTY;
else
fg = ZS_ALMOST_FULL;
return fg;
}
/*
* Each size class maintains various freelists and zspages are assigned
* to one of these freelists based on the number of live objects they
* have. This functions inserts the given zspage into the freelist
* identified by <class, fullness_group>.
*/
static void insert_zspage(struct page *page, struct size_class *class,
enum fullness_group fullness)
{
struct page **head;
BUG_ON(!is_first_page(page));
if (fullness >= _ZS_NR_FULLNESS_GROUPS)
return;
head = &class->fullness_list[fullness];
if (*head)
list_add_tail(&page->lru, &(*head)->lru);
*head = page;
}
/*
* This function removes the given zspage from the freelist identified
* by <class, fullness_group>.
*/
static void remove_zspage(struct page *page, struct size_class *class,
enum fullness_group fullness)
{
struct page **head;
BUG_ON(!is_first_page(page));
if (fullness >= _ZS_NR_FULLNESS_GROUPS)
return;
head = &class->fullness_list[fullness];
BUG_ON(!*head);
if (list_empty(&(*head)->lru))
*head = NULL;
else if (*head == page)
*head = (struct page *)list_entry((*head)->lru.next,
struct page, lru);
list_del_init(&page->lru);
}
/*
* Each size class maintains zspages in different fullness groups depending
* on the number of live objects they contain. When allocating or freeing
* objects, the fullness status of the page can change, say, from ALMOST_FULL
* to ALMOST_EMPTY when freeing an object. This function checks if such
* a status change has occurred for the given page and accordingly moves the
* page from the freelist of the old fullness group to that of the new
* fullness group.
*/
static enum fullness_group fix_fullness_group(struct size_class *class,
struct page *page)
{
int class_idx;
enum fullness_group currfg, newfg;
BUG_ON(!is_first_page(page));
get_zspage_mapping(page, &class_idx, &currfg);
newfg = get_fullness_group(page);
if (newfg == currfg)
goto out;
remove_zspage(page, class, currfg);
insert_zspage(page, class, newfg);
set_zspage_mapping(page, class_idx, newfg);
out:
return newfg;
}
/*
* We have to decide on how many pages to link together
* to form a zspage for each size class. This is important
* to reduce wastage due to unusable space left at end of
* each zspage which is given as:
* wastage = Zp - Zp % size_class
* where Zp = zspage size = k * PAGE_SIZE where k = 1, 2, ...
*
* For example, for size class of 3/8 * PAGE_SIZE, we should
* link together 3 PAGE_SIZE sized pages to form a zspage
* since then we can perfectly fit in 8 such objects.
*/
static int get_pages_per_zspage(int class_size)
{
int i, max_usedpc = 0;
/* zspage order which gives maximum used size per KB */
int max_usedpc_order = 1;
for (i = 1; i <= ZS_MAX_PAGES_PER_ZSPAGE; i++) {
int zspage_size;
int waste, usedpc;
zspage_size = i * PAGE_SIZE;
waste = zspage_size % class_size;
usedpc = (zspage_size - waste) * 100 / zspage_size;
if (usedpc > max_usedpc) {
max_usedpc = usedpc;
max_usedpc_order = i;
}
}
return max_usedpc_order;
}
/*
* A single 'zspage' is composed of many system pages which are
* linked together using fields in struct page. This function finds
* the first/head page, given any component page of a zspage.
*/
static struct page *get_first_page(struct page *page)
{
if (is_first_page(page))
return page;
else
return page->first_page;
}
static struct page *get_next_page(struct page *page)
{
struct page *next;
if (is_last_page(page))
next = NULL;
else if (is_first_page(page))
next = (struct page *)page_private(page);
else
next = list_entry(page->lru.next, struct page, lru);
return next;
}
/*
* Encode <page, obj_idx> as a single handle value.
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
* We use the least bit of handle for tagging.
*/
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
static void *location_to_obj(struct page *page, unsigned long obj_idx)
{
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
unsigned long obj;
if (!page) {
BUG_ON(obj_idx);
return NULL;
}
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
obj = page_to_pfn(page) << OBJ_INDEX_BITS;
obj |= ((obj_idx) & OBJ_INDEX_MASK);
obj <<= OBJ_TAG_BITS;
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
return (void *)obj;
}
/*
* Decode <page, obj_idx> pair from the given object handle. We adjust the
* decoded obj_idx back to its original value since it was adjusted in
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
* location_to_obj().
*/
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
static void obj_to_location(unsigned long obj, struct page **page,
unsigned long *obj_idx)
{
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
obj >>= OBJ_TAG_BITS;
*page = pfn_to_page(obj >> OBJ_INDEX_BITS);
*obj_idx = (obj & OBJ_INDEX_MASK);
}
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
static unsigned long handle_to_obj(unsigned long handle)
{
return *(unsigned long *)handle;
}
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
unsigned long obj_to_head(void *obj)
{
return *(unsigned long *)obj;
}
static unsigned long obj_idx_to_offset(struct page *page,
unsigned long obj_idx, int class_size)
{
unsigned long off = 0;
if (!is_first_page(page))
off = page->index;
return off + obj_idx * class_size;
}
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
static inline int trypin_tag(unsigned long handle)
{
unsigned long *ptr = (unsigned long *)handle;
return !test_and_set_bit_lock(HANDLE_PIN_BIT, ptr);
}
static void pin_tag(unsigned long handle)
{
while (!trypin_tag(handle));
}
static void unpin_tag(unsigned long handle)
{
unsigned long *ptr = (unsigned long *)handle;
clear_bit_unlock(HANDLE_PIN_BIT, ptr);
}
static void reset_page(struct page *page)
{
clear_bit(PG_private, &page->flags);
clear_bit(PG_private_2, &page->flags);
set_page_private(page, 0);
page->mapping = NULL;
page->freelist = NULL;
page_mapcount_reset(page);
}
static void free_zspage(struct page *first_page)
{
struct page *nextp, *tmp, *head_extra;
BUG_ON(!is_first_page(first_page));
BUG_ON(first_page->inuse);
head_extra = (struct page *)page_private(first_page);
reset_page(first_page);
__free_page(first_page);
/* zspage with only 1 system page */
if (!head_extra)
return;
list_for_each_entry_safe(nextp, tmp, &head_extra->lru, lru) {
list_del(&nextp->lru);
reset_page(nextp);
__free_page(nextp);
}
reset_page(head_extra);
__free_page(head_extra);
}
/* Initialize a newly allocated zspage */
static void init_zspage(struct page *first_page, struct size_class *class)
{
unsigned long off = 0;
struct page *page = first_page;
BUG_ON(!is_first_page(first_page));
while (page) {
struct page *next_page;
struct link_free *link;
unsigned int i = 1;
void *vaddr;
/*
* page->index stores offset of first object starting
* in the page. For the first page, this is always 0,
* so we use first_page->index (aka ->freelist) to store
* head of corresponding zspage's freelist.
*/
if (page != first_page)
page->index = off;
vaddr = kmap_atomic(page);
link = (struct link_free *)vaddr + off / sizeof(*link);
while ((off += class->size) < PAGE_SIZE) {
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
link->next = location_to_obj(page, i++);
link += class->size / sizeof(*link);
}
/*
* We now come to the last (full or partial) object on this
* page, which must point to the first object on the next
* page (if present)
*/
next_page = get_next_page(page);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
link->next = location_to_obj(next_page, 0);
kunmap_atomic(vaddr);
page = next_page;
off %= PAGE_SIZE;
}
}
/*
* Allocate a zspage for the given size class
*/
static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
{
int i, error;
struct page *first_page = NULL, *uninitialized_var(prev_page);
/*
* Allocate individual pages and link them together as:
* 1. first page->private = first sub-page
* 2. all sub-pages are linked together using page->lru
* 3. each sub-page is linked to the first page using page->first_page
*
* For each size class, First/Head pages are linked together using
* page->lru. Also, we set PG_private to identify the first page
* (i.e. no other sub-page has this flag set) and PG_private_2 to
* identify the last page.
*/
error = -ENOMEM;
for (i = 0; i < class->pages_per_zspage; i++) {
struct page *page;
page = alloc_page(flags);
if (!page)
goto cleanup;
INIT_LIST_HEAD(&page->lru);
if (i == 0) { /* first page */
SetPagePrivate(page);
set_page_private(page, 0);
first_page = page;
first_page->inuse = 0;
}
if (i == 1)
set_page_private(first_page, (unsigned long)page);
if (i >= 1)
page->first_page = first_page;
if (i >= 2)
list_add(&page->lru, &prev_page->lru);
if (i == class->pages_per_zspage - 1) /* last page */
SetPagePrivate2(page);
prev_page = page;
}
init_zspage(first_page, class);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
first_page->freelist = location_to_obj(first_page, 0);
/* Maximum number of objects we can store in this zspage */
first_page->objects = class->pages_per_zspage * PAGE_SIZE / class->size;
error = 0; /* Success */
cleanup:
if (unlikely(error) && first_page) {
free_zspage(first_page);
first_page = NULL;
}
return first_page;
}
static struct page *find_get_zspage(struct size_class *class)
{
int i;
struct page *page;
for (i = 0; i < _ZS_NR_FULLNESS_GROUPS; i++) {
page = class->fullness_list[i];
if (page)
break;
}
return page;
}
#ifdef CONFIG_PGTABLE_MAPPING
static inline int __zs_cpu_up(struct mapping_area *area)
{
/*
* Make sure we don't leak memory if a cpu UP notification
* and zs_init() race and both call zs_cpu_up() on the same cpu
*/
if (area->vm)
return 0;
area->vm = alloc_vm_area(PAGE_SIZE * 2, NULL);
if (!area->vm)
return -ENOMEM;
return 0;
}
static inline void __zs_cpu_down(struct mapping_area *area)
{
if (area->vm)
free_vm_area(area->vm);
area->vm = NULL;
}
static inline void *__zs_map_object(struct mapping_area *area,
struct page *pages[2], int off, int size)
{
BUG_ON(map_vm_area(area->vm, PAGE_KERNEL, pages));
area->vm_addr = area->vm->addr;
return area->vm_addr + off;
}
static inline void __zs_unmap_object(struct mapping_area *area,
struct page *pages[2], int off, int size)
{
unsigned long addr = (unsigned long)area->vm_addr;
unmap_kernel_range(addr, PAGE_SIZE * 2);
}
#else /* CONFIG_PGTABLE_MAPPING */
static inline int __zs_cpu_up(struct mapping_area *area)
{
/*
* Make sure we don't leak memory if a cpu UP notification
* and zs_init() race and both call zs_cpu_up() on the same cpu
*/
if (area->vm_buf)
return 0;
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
area->vm_buf = kmalloc(ZS_MAX_ALLOC_SIZE, GFP_KERNEL);
if (!area->vm_buf)
return -ENOMEM;
return 0;
}
static inline void __zs_cpu_down(struct mapping_area *area)
{
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
kfree(area->vm_buf);
area->vm_buf = NULL;
}
static void *__zs_map_object(struct mapping_area *area,
struct page *pages[2], int off, int size)
{
int sizes[2];
void *addr;
char *buf = area->vm_buf;
/* disable page faults to match kmap_atomic() return conditions */
pagefault_disable();
/* no read fastpath */
if (area->vm_mm == ZS_MM_WO)
goto out;
sizes[0] = PAGE_SIZE - off;
sizes[1] = size - sizes[0];
/* copy object to per-cpu buffer */
addr = kmap_atomic(pages[0]);
memcpy(buf, addr + off, sizes[0]);
kunmap_atomic(addr);
addr = kmap_atomic(pages[1]);
memcpy(buf + sizes[0], addr, sizes[1]);
kunmap_atomic(addr);
out:
return area->vm_buf;
}
static void __zs_unmap_object(struct mapping_area *area,
struct page *pages[2], int off, int size)
{
int sizes[2];
void *addr;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
char *buf;
/* no write fastpath */
if (area->vm_mm == ZS_MM_RO)
goto out;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
buf = area->vm_buf + ZS_HANDLE_SIZE;
size -= ZS_HANDLE_SIZE;
off += ZS_HANDLE_SIZE;
sizes[0] = PAGE_SIZE - off;
sizes[1] = size - sizes[0];
/* copy per-cpu buffer to object */
addr = kmap_atomic(pages[0]);
memcpy(addr + off, buf, sizes[0]);
kunmap_atomic(addr);
addr = kmap_atomic(pages[1]);
memcpy(addr, buf + sizes[0], sizes[1]);
kunmap_atomic(addr);
out:
/* enable page faults to match kunmap_atomic() return conditions */
pagefault_enable();
}
#endif /* CONFIG_PGTABLE_MAPPING */
static int zs_cpu_notifier(struct notifier_block *nb, unsigned long action,
void *pcpu)
{
int ret, cpu = (long)pcpu;
struct mapping_area *area;
switch (action) {
case CPU_UP_PREPARE:
area = &per_cpu(zs_map_area, cpu);
ret = __zs_cpu_up(area);
if (ret)
return notifier_from_errno(ret);
break;
case CPU_DEAD:
case CPU_UP_CANCELED:
area = &per_cpu(zs_map_area, cpu);
__zs_cpu_down(area);
break;
}
return NOTIFY_OK;
}
static struct notifier_block zs_cpu_nb = {
.notifier_call = zs_cpu_notifier
};
static int zs_register_cpu_notifier(void)
{
int cpu, uninitialized_var(ret);
cpu_notifier_register_begin();
__register_cpu_notifier(&zs_cpu_nb);
for_each_online_cpu(cpu) {
ret = zs_cpu_notifier(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
if (notifier_to_errno(ret))
break;
}
cpu_notifier_register_done();
return notifier_to_errno(ret);
}
static void zs_unregister_cpu_notifier(void)
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
{
int cpu;
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
cpu_notifier_register_begin();
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
for_each_online_cpu(cpu)
zs_cpu_notifier(NULL, CPU_DEAD, (void *)(long)cpu);
__unregister_cpu_notifier(&zs_cpu_nb);
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
cpu_notifier_register_done();
}
static void init_zs_size_classes(void)
{
int nr;
nr = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1;
if ((ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) % ZS_SIZE_CLASS_DELTA)
nr += 1;
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
zs_size_classes = nr;
}
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
{
return pages_per_zspage * PAGE_SIZE / size;
}
static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
{
if (prev->pages_per_zspage != pages_per_zspage)
return false;
if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
!= get_maxobj_per_zspage(size, pages_per_zspage))
return false;
return true;
}
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
static bool zspage_full(struct page *page)
{
BUG_ON(!is_first_page(page));
return page->inuse == page->objects;
}
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
#ifdef CONFIG_ZSMALLOC_STAT
static inline void zs_stat_inc(struct size_class *class,
enum zs_stat_type type, unsigned long cnt)
{
class->stats.objs[type] += cnt;
}
static inline void zs_stat_dec(struct size_class *class,
enum zs_stat_type type, unsigned long cnt)
{
class->stats.objs[type] -= cnt;
}
static inline unsigned long zs_stat_get(struct size_class *class,
enum zs_stat_type type)
{
return class->stats.objs[type];
}
static int __init zs_stat_init(void)
{
if (!debugfs_initialized())
return -ENODEV;
zs_stat_root = debugfs_create_dir("zsmalloc", NULL);
if (!zs_stat_root)
return -ENOMEM;
return 0;
}
static void __exit zs_stat_exit(void)
{
debugfs_remove_recursive(zs_stat_root);
}
static int zs_stats_size_show(struct seq_file *s, void *v)
{
int i;
struct zs_pool *pool = s->private;
struct size_class *class;
int objs_per_zspage;
unsigned long obj_allocated, obj_used, pages_used;
unsigned long total_objs = 0, total_used_objs = 0, total_pages = 0;
seq_printf(s, " %5s %5s %13s %10s %10s\n", "class", "size",
"obj_allocated", "obj_used", "pages_used");
for (i = 0; i < zs_size_classes; i++) {
class = pool->size_class[i];
if (class->index != i)
continue;
spin_lock(&class->lock);
obj_allocated = zs_stat_get(class, OBJ_ALLOCATED);
obj_used = zs_stat_get(class, OBJ_USED);
spin_unlock(&class->lock);
objs_per_zspage = get_maxobj_per_zspage(class->size,
class->pages_per_zspage);
pages_used = obj_allocated / objs_per_zspage *
class->pages_per_zspage;
seq_printf(s, " %5u %5u %10lu %10lu %10lu\n", i,
class->size, obj_allocated, obj_used, pages_used);
total_objs += obj_allocated;
total_used_objs += obj_used;
total_pages += pages_used;
}
seq_puts(s, "\n");
seq_printf(s, " %5s %5s %10lu %10lu %10lu\n", "Total", "",
total_objs, total_used_objs, total_pages);
return 0;
}
static int zs_stats_size_open(struct inode *inode, struct file *file)
{
return single_open(file, zs_stats_size_show, inode->i_private);
}
static const struct file_operations zs_stat_size_ops = {
.open = zs_stats_size_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int zs_pool_stat_create(char *name, struct zs_pool *pool)
{
struct dentry *entry;
if (!zs_stat_root)
return -ENODEV;
entry = debugfs_create_dir(name, zs_stat_root);
if (!entry) {
pr_warn("debugfs dir <%s> creation failed\n", name);
return -ENOMEM;
}
pool->stat_dentry = entry;
entry = debugfs_create_file("obj_in_classes", S_IFREG | S_IRUGO,
pool->stat_dentry, pool, &zs_stat_size_ops);
if (!entry) {
pr_warn("%s: debugfs file entry <%s> creation failed\n",
name, "obj_in_classes");
return -ENOMEM;
}
return 0;
}
static void zs_pool_stat_destroy(struct zs_pool *pool)
{
debugfs_remove_recursive(pool->stat_dentry);
}
#else /* CONFIG_ZSMALLOC_STAT */
static inline void zs_stat_inc(struct size_class *class,
enum zs_stat_type type, unsigned long cnt)
{
}
static inline void zs_stat_dec(struct size_class *class,
enum zs_stat_type type, unsigned long cnt)
{
}
static inline unsigned long zs_stat_get(struct size_class *class,
enum zs_stat_type type)
{
return 0;
}
static int __init zs_stat_init(void)
{
return 0;
}
static void __exit zs_stat_exit(void)
{
}
static inline int zs_pool_stat_create(char *name, struct zs_pool *pool)
{
return 0;
}
static inline void zs_pool_stat_destroy(struct zs_pool *pool)
{
}
#endif
unsigned long zs_get_total_pages(struct zs_pool *pool)
{
return atomic_long_read(&pool->pages_allocated);
}
EXPORT_SYMBOL_GPL(zs_get_total_pages);
/**
* zs_map_object - get address of allocated object from handle.
* @pool: pool from which the object was allocated
* @handle: handle returned from zs_malloc
*
* Before using an object allocated from zs_malloc, it must be mapped using
* this function. When done with the object, it must be unmapped using
* zs_unmap_object.
*
* Only one object can be mapped per cpu at a time. There is no protection
* against nested mappings.
*
* This function returns with preemption and page faults disabled.
*/
void *zs_map_object(struct zs_pool *pool, unsigned long handle,
enum zs_mapmode mm)
{
struct page *page;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
unsigned long obj, obj_idx, off;
unsigned int class_idx;
enum fullness_group fg;
struct size_class *class;
struct mapping_area *area;
struct page *pages[2];
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
void *ret;
BUG_ON(!handle);
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
/*
* Because we use per-cpu mapping areas shared among the
* pools/users, we can't allow mapping in interrupt context
* because it can corrupt another users mappings.
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
*/
BUG_ON(in_interrupt());
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
/* From now on, migration cannot move the object */
pin_tag(handle);
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
obj = handle_to_obj(handle);
obj_to_location(obj, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = &get_cpu_var(zs_map_area);
area->vm_mm = mm;
if (off + class->size <= PAGE_SIZE) {
/* this object is contained entirely within a page */
area->vm_addr = kmap_atomic(page);
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
ret = area->vm_addr + off;
goto out;
}
/* this object spans two pages */
pages[0] = page;
pages[1] = get_next_page(page);
BUG_ON(!pages[1]);
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
ret = __zs_map_object(area, pages, off, class->size);
out:
return ret + ZS_HANDLE_SIZE;
}
EXPORT_SYMBOL_GPL(zs_map_object);
void zs_unmap_object(struct zs_pool *pool, unsigned long handle)
{
struct page *page;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
unsigned long obj, obj_idx, off;
unsigned int class_idx;
enum fullness_group fg;
struct size_class *class;
struct mapping_area *area;
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
BUG_ON(!handle);
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
obj = handle_to_obj(handle);
obj_to_location(obj, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = this_cpu_ptr(&zs_map_area);
if (off + class->size <= PAGE_SIZE)
kunmap_atomic(area->vm_addr);
else {
struct page *pages[2];
mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZE I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:01 +00:00
pages[0] = page;
pages[1] = get_next_page(page);
BUG_ON(!pages[1]);
__zs_unmap_object(area, pages, off, class->size);
}
put_cpu_var(zs_map_area);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
unpin_tag(handle);
}
EXPORT_SYMBOL_GPL(zs_unmap_object);
static unsigned long obj_malloc(struct page *first_page,
struct size_class *class, unsigned long handle)
{
unsigned long obj;
struct link_free *link;
struct page *m_page;
unsigned long m_objidx, m_offset;
void *vaddr;
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
handle |= OBJ_ALLOCATED_TAG;
obj = (unsigned long)first_page->freelist;
obj_to_location(obj, &m_page, &m_objidx);
m_offset = obj_idx_to_offset(m_page, m_objidx, class->size);
vaddr = kmap_atomic(m_page);
link = (struct link_free *)vaddr + m_offset / sizeof(*link);
first_page->freelist = link->next;
/* record handle in the header of allocated chunk */
link->handle = handle;
kunmap_atomic(vaddr);
first_page->inuse++;
zs_stat_inc(class, OBJ_USED, 1);
return obj;
}
/**
* zs_malloc - Allocate block of given size from pool.
* @pool: pool to allocate from
* @size: size of block to allocate
*
* On success, handle to the allocated object is returned,
* otherwise 0.
* Allocation requests with size > ZS_MAX_ALLOC_SIZE will fail.
*/
unsigned long zs_malloc(struct zs_pool *pool, size_t size)
{
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
unsigned long handle, obj;
struct size_class *class;
struct page *first_page;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
if (unlikely(!size || (size + ZS_HANDLE_SIZE) > ZS_MAX_ALLOC_SIZE))
return 0;
handle = alloc_handle(pool);
if (!handle)
return 0;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
/* extra space in chunk to keep the handle */
size += ZS_HANDLE_SIZE;
zsmalloc: merge size_class to reduce fragmentation zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:44 +00:00
class = pool->size_class[get_size_class_index(size)];
spin_lock(&class->lock);
first_page = find_get_zspage(class);
if (!first_page) {
spin_unlock(&class->lock);
first_page = alloc_zspage(class, pool->flags);
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
if (unlikely(!first_page)) {
free_handle(pool, handle);
return 0;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
}
set_zspage_mapping(first_page, class->index, ZS_EMPTY);
zsmalloc: move pages_allocated to zs_pool Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:29:48 +00:00
atomic_long_add(class->pages_per_zspage,
&pool->pages_allocated);
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
spin_lock(&class->lock);
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
zs_stat_inc(class, OBJ_ALLOCATED, get_maxobj_per_zspage(
class->size, class->pages_per_zspage));
}
obj = obj_malloc(first_page, class, handle);
/* Now move the zspage to another fullness group, if required */
fix_fullness_group(class, first_page);
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
record_obj(handle, obj);
spin_unlock(&class->lock);
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
return handle;
}
EXPORT_SYMBOL_GPL(zs_malloc);
static void obj_free(struct zs_pool *pool, struct size_class *class,
unsigned long obj)
{
struct link_free *link;
struct page *first_page, *f_page;
unsigned long f_objidx, f_offset;
void *vaddr;
int class_idx;
enum fullness_group fullness;
BUG_ON(!obj);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
obj &= ~OBJ_ALLOCATED_TAG;
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
obj_to_location(obj, &f_page, &f_objidx);
first_page = get_first_page(f_page);
get_zspage_mapping(first_page, &class_idx, &fullness);
f_offset = obj_idx_to_offset(f_page, f_objidx, class->size);
vaddr = kmap_atomic(f_page);
/* Insert this object in containing zspage's freelist */
link = (struct link_free *)(vaddr + f_offset);
link->next = first_page->freelist;
kunmap_atomic(vaddr);
first_page->freelist = (void *)obj;
first_page->inuse--;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
zs_stat_dec(class, OBJ_USED, 1);
}
void zs_free(struct zs_pool *pool, unsigned long handle)
{
struct page *first_page, *f_page;
unsigned long obj, f_objidx;
int class_idx;
struct size_class *class;
enum fullness_group fullness;
if (unlikely(!handle))
return;
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
pin_tag(handle);
obj = handle_to_obj(handle);
obj_to_location(obj, &f_page, &f_objidx);
first_page = get_first_page(f_page);
get_zspage_mapping(first_page, &class_idx, &fullness);
class = pool->size_class[class_idx];
spin_lock(&class->lock);
obj_free(pool, class, obj);
fullness = fix_fullness_group(class, first_page);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
if (fullness == ZS_EMPTY) {
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
zs_stat_dec(class, OBJ_ALLOCATED, get_maxobj_per_zspage(
class->size, class->pages_per_zspage));
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
atomic_long_sub(class->pages_per_zspage,
&pool->pages_allocated);
free_zspage(first_page);
}
spin_unlock(&class->lock);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
unpin_tag(handle);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
free_handle(pool, handle);
}
EXPORT_SYMBOL_GPL(zs_free);
static void zs_object_copy(unsigned long src, unsigned long dst,
struct size_class *class)
{
struct page *s_page, *d_page;
unsigned long s_objidx, d_objidx;
unsigned long s_off, d_off;
void *s_addr, *d_addr;
int s_size, d_size, size;
int written = 0;
s_size = d_size = class->size;
obj_to_location(src, &s_page, &s_objidx);
obj_to_location(dst, &d_page, &d_objidx);
s_off = obj_idx_to_offset(s_page, s_objidx, class->size);
d_off = obj_idx_to_offset(d_page, d_objidx, class->size);
if (s_off + class->size > PAGE_SIZE)
s_size = PAGE_SIZE - s_off;
if (d_off + class->size > PAGE_SIZE)
d_size = PAGE_SIZE - d_off;
s_addr = kmap_atomic(s_page);
d_addr = kmap_atomic(d_page);
while (1) {
size = min(s_size, d_size);
memcpy(d_addr + d_off, s_addr + s_off, size);
written += size;
if (written == class->size)
break;
if (s_off + size >= PAGE_SIZE) {
kunmap_atomic(d_addr);
kunmap_atomic(s_addr);
s_page = get_next_page(s_page);
BUG_ON(!s_page);
s_addr = kmap_atomic(s_page);
d_addr = kmap_atomic(d_page);
s_size = class->size - written;
s_off = 0;
} else {
s_off += size;
s_size -= size;
}
if (d_off + size >= PAGE_SIZE) {
kunmap_atomic(d_addr);
d_page = get_next_page(d_page);
BUG_ON(!d_page);
d_addr = kmap_atomic(d_page);
d_size = class->size - written;
d_off = 0;
} else {
d_off += size;
d_size -= size;
}
}
kunmap_atomic(d_addr);
kunmap_atomic(s_addr);
}
/*
* Find alloced object in zspage from index object and
* return handle.
*/
static unsigned long find_alloced_obj(struct page *page, int index,
struct size_class *class)
{
unsigned long head;
int offset = 0;
unsigned long handle = 0;
void *addr = kmap_atomic(page);
if (!is_first_page(page))
offset = page->index;
offset += class->size * index;
while (offset < PAGE_SIZE) {
head = obj_to_head(addr + offset);
if (head & OBJ_ALLOCATED_TAG) {
handle = head & ~OBJ_ALLOCATED_TAG;
if (trypin_tag(handle))
break;
handle = 0;
}
offset += class->size;
index++;
}
kunmap_atomic(addr);
return handle;
}
struct zs_compact_control {
/* Source page for migration which could be a subpage of zspage. */
struct page *s_page;
/* Destination page for migration which should be a first page
* of zspage. */
struct page *d_page;
/* Starting object index within @s_page which used for live object
* in the subpage. */
int index;
/* how many of objects are migrated */
int nr_migrated;
};
static int migrate_zspage(struct zs_pool *pool, struct size_class *class,
struct zs_compact_control *cc)
{
unsigned long used_obj, free_obj;
unsigned long handle;
struct page *s_page = cc->s_page;
struct page *d_page = cc->d_page;
unsigned long index = cc->index;
int nr_migrated = 0;
int ret = 0;
while (1) {
handle = find_alloced_obj(s_page, index, class);
if (!handle) {
s_page = get_next_page(s_page);
if (!s_page)
break;
index = 0;
continue;
}
/* Stop if there is no more space */
if (zspage_full(d_page)) {
unpin_tag(handle);
ret = -ENOMEM;
break;
}
used_obj = handle_to_obj(handle);
free_obj = obj_malloc(d_page, class, handle);
zs_object_copy(used_obj, free_obj, class);
index++;
record_obj(handle, free_obj);
unpin_tag(handle);
obj_free(pool, class, used_obj);
nr_migrated++;
}
/* Remember last position in this iteration */
cc->s_page = s_page;
cc->index = index;
cc->nr_migrated = nr_migrated;
return ret;
}
static struct page *alloc_target_page(struct size_class *class)
{
int i;
struct page *page;
for (i = 0; i < _ZS_NR_FULLNESS_GROUPS; i++) {
page = class->fullness_list[i];
if (page) {
remove_zspage(page, class, i);
break;
}
}
return page;
}
static void putback_zspage(struct zs_pool *pool, struct size_class *class,
struct page *first_page)
{
int class_idx;
enum fullness_group fullness;
BUG_ON(!is_first_page(first_page));
get_zspage_mapping(first_page, &class_idx, &fullness);
insert_zspage(first_page, class, fullness);
fullness = fix_fullness_group(class, first_page);
zsmalloc: move pages_allocated to zs_pool Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:29:48 +00:00
if (fullness == ZS_EMPTY) {
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
zs_stat_dec(class, OBJ_ALLOCATED, get_maxobj_per_zspage(
class->size, class->pages_per_zspage));
zsmalloc: move pages_allocated to zs_pool Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:29:48 +00:00
atomic_long_sub(class->pages_per_zspage,
&pool->pages_allocated);
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
free_zspage(first_page);
zsmalloc: move pages_allocated to zs_pool Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:29:48 +00:00
}
}
zsmalloc: support compaction This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:30 +00:00
static struct page *isolate_source_page(struct size_class *class)
{
struct page *page;
page = class->fullness_list[ZS_ALMOST_EMPTY];
if (page)
remove_zspage(page, class, ZS_ALMOST_EMPTY);
return page;
}
static unsigned long __zs_compact(struct zs_pool *pool,
struct size_class *class)
{
int nr_to_migrate;
struct zs_compact_control cc;
struct page *src_page;
struct page *dst_page = NULL;
unsigned long nr_total_migrated = 0;
cond_resched();
spin_lock(&class->lock);
while ((src_page = isolate_source_page(class))) {
BUG_ON(!is_first_page(src_page));
/* The goal is to migrate all live objects in source page */
nr_to_migrate = src_page->inuse;
cc.index = 0;
cc.s_page = src_page;
while ((dst_page = alloc_target_page(class))) {
cc.d_page = dst_page;
/*
* If there is no more space in dst_page, try to
* allocate another zspage.
*/
if (!migrate_zspage(pool, class, &cc))
break;
putback_zspage(pool, class, dst_page);
nr_total_migrated += cc.nr_migrated;
nr_to_migrate -= cc.nr_migrated;
}
/* Stop if we couldn't find slot */
if (dst_page == NULL)
break;
putback_zspage(pool, class, dst_page);
putback_zspage(pool, class, src_page);
spin_unlock(&class->lock);
nr_total_migrated += cc.nr_migrated;
cond_resched();
spin_lock(&class->lock);
}
if (src_page)
putback_zspage(pool, class, src_page);
spin_unlock(&class->lock);
return nr_total_migrated;
}
unsigned long zs_compact(struct zs_pool *pool)
{
int i;
unsigned long nr_migrated = 0;
struct size_class *class;
for (i = zs_size_classes - 1; i >= 0; i--) {
class = pool->size_class[i];
if (!class)
continue;
if (class->index != i)
continue;
nr_migrated += __zs_compact(pool, class);
}
synchronize_rcu();
return nr_migrated;
}
EXPORT_SYMBOL_GPL(zs_compact);
/**
* zs_create_pool - Creates an allocation pool to work from.
* @flags: allocation flags used to allocate pool metadata
*
* This function must be called before anything when using
* the zsmalloc allocator.
*
* On success, a pointer to the newly created pool is returned,
* otherwise NULL.
*/
struct zs_pool *zs_create_pool(char *name, gfp_t flags)
{
int i;
struct zs_pool *pool;
struct size_class *prev_class = NULL;
pool = kzalloc(sizeof(*pool), GFP_KERNEL);
if (!pool)
return NULL;
pool->size_class = kcalloc(zs_size_classes, sizeof(struct size_class *),
GFP_KERNEL);
if (!pool->size_class) {
kfree(pool);
return NULL;
}
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
pool->name = kstrdup(name, GFP_KERNEL);
if (!pool->name)
goto err;
if (create_handle_cache(pool))
goto err;
/*
* Iterate reversly, because, size of size_class that we want to use
* for merging should be larger or equal to current size.
*/
for (i = zs_size_classes - 1; i >= 0; i--) {
int size;
int pages_per_zspage;
struct size_class *class;
size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
if (size > ZS_MAX_ALLOC_SIZE)
size = ZS_MAX_ALLOC_SIZE;
pages_per_zspage = get_pages_per_zspage(size);
/*
* size_class is used for normal zsmalloc operation such
* as alloc/free for that size. Although it is natural that we
* have one size_class for each size, there is a chance that we
* can get more memory utilization if we use one size_class for
* many different sizes whose size_class have same
* characteristics. So, we makes size_class point to
* previous size_class if possible.
*/
if (prev_class) {
if (can_merge(prev_class, size, pages_per_zspage)) {
pool->size_class[i] = prev_class;
continue;
}
}
class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
if (!class)
goto err;
class->size = size;
class->index = i;
class->pages_per_zspage = pages_per_zspage;
spin_lock_init(&class->lock);
pool->size_class[i] = class;
prev_class = class;
}
pool->flags = flags;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
if (zs_pool_stat_create(name, pool))
goto err;
return pool;
err:
zs_destroy_pool(pool);
return NULL;
}
EXPORT_SYMBOL_GPL(zs_create_pool);
void zs_destroy_pool(struct zs_pool *pool)
{
int i;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
zs_pool_stat_destroy(pool);
for (i = 0; i < zs_size_classes; i++) {
int fg;
struct size_class *class = pool->size_class[i];
if (!class)
continue;
if (class->index != i)
continue;
for (fg = 0; fg < _ZS_NR_FULLNESS_GROUPS; fg++) {
if (class->fullness_list[fg]) {
pr_info("Freeing non-empty class with size %db, fullness group %d\n",
class->size, fg);
}
}
kfree(class);
}
zsmalloc: decouple handle and object Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:23 +00:00
destroy_handle_cache(pool);
kfree(pool->size_class);
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
kfree(pool->name);
kfree(pool);
}
EXPORT_SYMBOL_GPL(zs_destroy_pool);
static int __init zs_init(void)
{
int ret = zs_register_cpu_notifier();
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
if (ret)
goto notifier_fail;
init_zs_size_classes();
#ifdef CONFIG_ZPOOL
zpool_register_driver(&zs_zpool_driver);
#endif
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
ret = zs_stat_init();
if (ret) {
pr_err("zs stat initialization failed\n");
goto stat_fail;
}
return 0;
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
stat_fail:
#ifdef CONFIG_ZPOOL
zpool_unregister_driver(&zs_zpool_driver);
#endif
notifier_fail:
zs_unregister_cpu_notifier();
return ret;
}
static void __exit zs_exit(void)
{
#ifdef CONFIG_ZPOOL
zpool_unregister_driver(&zs_zpool_driver);
#endif
zs_unregister_cpu_notifier();
mm/zsmalloc: add statistics support Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:00:54 +00:00
zs_stat_exit();
}
module_init(zs_init);
module_exit(zs_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Nitin Gupta <ngupta@vflare.org>");