linux/drivers/gpu/drm/drm_self_refresh_helper.c

282 lines
8.3 KiB
C
Raw Normal View History

drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
// SPDX-License-Identifier: MIT
/*
* Copyright (C) 2019 Google, Inc.
*
* Authors:
* Sean Paul <seanpaul@chromium.org>
*/
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
#include <linux/average.h>
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mode_config.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_print.h>
#include <drm/drm_self_refresh_helper.h>
/**
* DOC: overview
*
* This helper library provides an easy way for drivers to leverage the atomic
* framework to implement panel self refresh (SR) support. Drivers are
* responsible for initializing and cleaning up the SR helpers on load/unload
* (see &drm_self_refresh_helper_init/&drm_self_refresh_helper_cleanup).
* The connector is responsible for setting
* &drm_connector_state.self_refresh_aware to true at runtime if it is SR-aware
* (meaning it knows how to initiate self refresh on the panel).
*
* Once a crtc has enabled SR using &drm_self_refresh_helper_init, the
* helpers will monitor activity and call back into the driver to enable/disable
* SR as appropriate. The best way to think about this is that it's a DPMS
* on/off request with &drm_crtc_state.self_refresh_active set in crtc state
* that tells you to disable/enable SR on the panel instead of power-cycling it.
*
* During SR, drivers may choose to fully disable their crtc/encoder/bridge
* hardware (in which case no driver changes are necessary), or they can inspect
* &drm_crtc_state.self_refresh_active if they want to enter low power mode
* without full disable (in case full disable/enable is too slow).
*
* SR will be deactivated if there are any atomic updates affecting the
* pipe that is in SR mode. If a crtc is driving multiple connectors, all
* connectors must be SR aware and all will enter/exit SR mode at the same time.
*
* If the crtc and connector are SR aware, but the panel connected does not
* support it (or is otherwise unable to enter SR), the driver should fail
* atomic_check when &drm_crtc_state.self_refresh_active is true.
*/
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
#define SELF_REFRESH_AVG_SEED_MS 200
DECLARE_EWMA(psr_time, 4, 4)
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
struct drm_self_refresh_data {
struct drm_crtc *crtc;
struct delayed_work entry_work;
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
struct mutex avg_mutex;
struct ewma_psr_time entry_avg_ms;
struct ewma_psr_time exit_avg_ms;
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
};
static void drm_self_refresh_helper_entry_work(struct work_struct *work)
{
struct drm_self_refresh_data *sr_data = container_of(
to_delayed_work(work),
struct drm_self_refresh_data, entry_work);
struct drm_crtc *crtc = sr_data->crtc;
struct drm_device *dev = crtc->dev;
struct drm_modeset_acquire_ctx ctx;
struct drm_atomic_state *state;
struct drm_connector *conn;
struct drm_connector_state *conn_state;
struct drm_crtc_state *crtc_state;
int i, ret = 0;
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
drm_modeset_acquire_init(&ctx, 0);
state = drm_atomic_state_alloc(dev);
if (!state) {
ret = -ENOMEM;
goto out_drop_locks;
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
}
retry:
state->acquire_ctx = &ctx;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto out;
}
if (!crtc_state->enable)
goto out;
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret)
goto out;
for_each_new_connector_in_state(state, conn, conn_state, i) {
if (!conn_state->self_refresh_aware)
goto out;
}
crtc_state->active = false;
crtc_state->self_refresh_active = true;
ret = drm_atomic_commit(state);
if (ret)
goto out;
out:
if (ret == -EDEADLK) {
drm_atomic_state_clear(state);
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_atomic_state_put(state);
out_drop_locks:
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
}
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
/**
* drm_self_refresh_helper_update_avg_times - Updates a crtc's SR time averages
* @state: the state which has just been applied to hardware
* @commit_time_ms: the amount of time in ms that this commit took to complete
* @new_self_refresh_mask: bitmask of crtc's that have self_refresh_active in
* new state
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
*
* Called after &drm_mode_config_funcs.atomic_commit_tail, this function will
* update the average entry/exit self refresh times on self refresh transitions.
* These averages will be used when calculating how long to delay before
* entering self refresh mode after activity.
*/
void
drm_self_refresh_helper_update_avg_times(struct drm_atomic_state *state,
unsigned int commit_time_ms,
unsigned int new_self_refresh_mask)
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state;
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
int i;
for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) {
bool new_self_refresh_active = new_self_refresh_mask & BIT(i);
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
struct ewma_psr_time *time;
if (old_crtc_state->self_refresh_active ==
new_self_refresh_active)
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
continue;
if (new_self_refresh_active)
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
time = &sr_data->entry_avg_ms;
else
time = &sr_data->exit_avg_ms;
mutex_lock(&sr_data->avg_mutex);
ewma_psr_time_add(time, commit_time_ms);
mutex_unlock(&sr_data->avg_mutex);
}
}
EXPORT_SYMBOL(drm_self_refresh_helper_update_avg_times);
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
/**
* drm_self_refresh_helper_alter_state - Alters the atomic state for SR exit
* @state: the state currently being checked
*
* Called at the end of atomic check. This function checks the state for flags
* incompatible with self refresh exit and changes them. This is a bit
* disingenuous since userspace is expecting one thing and we're giving it
* another. However in order to keep self refresh entirely hidden from
* userspace, this is required.
*
* At the end, we queue up the self refresh entry work so we can enter PSR after
* the desired delay.
*/
void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i;
if (state->async_update || !state->allow_modeset) {
for_each_old_crtc_in_state(state, crtc, crtc_state, i) {
if (crtc_state->self_refresh_active) {
state->async_update = false;
state->allow_modeset = true;
break;
}
}
}
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
struct drm_self_refresh_data *sr_data;
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
unsigned int delay;
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
/* Don't trigger the entry timer when we're already in SR */
if (crtc_state->self_refresh_active)
continue;
sr_data = crtc->self_refresh_data;
if (!sr_data)
continue;
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
mutex_lock(&sr_data->avg_mutex);
delay = (ewma_psr_time_read(&sr_data->entry_avg_ms) +
ewma_psr_time_read(&sr_data->exit_avg_ms)) * 2;
mutex_unlock(&sr_data->avg_mutex);
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
mod_delayed_work(system_wq, &sr_data->entry_work,
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
msecs_to_jiffies(delay));
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
}
}
EXPORT_SYMBOL(drm_self_refresh_helper_alter_state);
/**
* drm_self_refresh_helper_init - Initializes self refresh helpers for a crtc
* @crtc: the crtc which supports self refresh supported displays
*
* Returns zero if successful or -errno on failure
*/
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
int drm_self_refresh_helper_init(struct drm_crtc *crtc)
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
{
struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
/* Helper is already initialized */
if (WARN_ON(sr_data))
return -EINVAL;
sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL);
if (!sr_data)
return -ENOMEM;
INIT_DELAYED_WORK(&sr_data->entry_work,
drm_self_refresh_helper_entry_work);
sr_data->crtc = crtc;
drm: Measure Self Refresh Entry/Exit times to avoid thrashing Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-18 20:07:29 +00:00
mutex_init(&sr_data->avg_mutex);
ewma_psr_time_init(&sr_data->entry_avg_ms);
ewma_psr_time_init(&sr_data->exit_avg_ms);
/*
* Seed the averages so they're non-zero (and sufficiently large
* for even poorly performing panels). As time goes on, this will be
* averaged out and the values will trend to their true value.
*/
ewma_psr_time_add(&sr_data->entry_avg_ms, SELF_REFRESH_AVG_SEED_MS);
ewma_psr_time_add(&sr_data->exit_avg_ms, SELF_REFRESH_AVG_SEED_MS);
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
crtc->self_refresh_data = sr_data;
return 0;
}
EXPORT_SYMBOL(drm_self_refresh_helper_init);
/**
* drm_self_refresh_helper_cleanup - Cleans up self refresh helpers for a crtc
* @crtc: the crtc to cleanup
*/
void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc)
{
struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
/* Helper is already uninitialized */
if (!sr_data)
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 14:50:19 +00:00
return;
crtc->self_refresh_data = NULL;
cancel_delayed_work_sync(&sr_data->entry_work);
kfree(sr_data);
}
EXPORT_SYMBOL(drm_self_refresh_helper_cleanup);