License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-10-23 05:26:29 +00:00
|
|
|
#ifndef _ASM_X86_BOOT_H
|
|
|
|
|
#define _ASM_X86_BOOT_H
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-01-14 20:37:46 +00:00
|
|
|
|
2009-06-25 22:16:06 +00:00
|
|
|
#include <asm/pgtable_types.h>
|
2012-12-14 22:37:13 +00:00
|
|
|
#include <uapi/asm/boot.h>
|
2009-05-11 22:56:08 +00:00
|
|
|
|
2007-05-09 05:14:03 +00:00
|
|
|
/* Physical address where kernel should be loaded. */
|
2007-01-06 00:36:30 +00:00
|
|
|
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
|
|
|
|
|
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
|
2006-12-07 01:14:04 +00:00
|
|
|
& ~(CONFIG_PHYSICAL_ALIGN - 1))
|
|
|
|
|
|
2009-05-11 22:56:08 +00:00
|
|
|
/* Minimum kernel alignment, as a power of two */
|
2009-06-25 20:20:48 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2016-05-06 22:01:33 +00:00
|
|
|
# define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
|
2009-05-11 22:56:08 +00:00
|
|
|
#else
|
2016-05-06 22:01:33 +00:00
|
|
|
# define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_SIZE_ORDER)
|
2009-05-11 22:56:08 +00:00
|
|
|
#endif
|
|
|
|
|
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
|
|
|
|
|
|
|
|
|
|
#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
|
2010-04-21 14:23:44 +00:00
|
|
|
(CONFIG_PHYSICAL_ALIGN < MIN_KERNEL_ALIGN)
|
2016-05-06 22:01:33 +00:00
|
|
|
# error "Invalid value for CONFIG_PHYSICAL_ALIGN"
|
2009-05-11 22:56:08 +00:00
|
|
|
#endif
|
|
|
|
|
|
2009-01-14 20:37:46 +00:00
|
|
|
#ifdef CONFIG_KERNEL_BZIP2
|
2016-05-06 22:01:33 +00:00
|
|
|
# define BOOT_HEAP_SIZE 0x400000
|
2009-01-14 20:37:46 +00:00
|
|
|
#else /* !CONFIG_KERNEL_BZIP2 */
|
2016-05-06 22:01:33 +00:00
|
|
|
# define BOOT_HEAP_SIZE 0x10000
|
|
|
|
|
#endif
|
2009-01-04 21:46:17 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_X86_64
|
2016-05-06 22:01:33 +00:00
|
|
|
# define BOOT_STACK_SIZE 0x4000
|
x86/KASLR: Build identity mappings on demand
Currently KASLR only supports relocation in a small physical range (from
16M to 1G), due to using the initial kernel page table identity mapping.
To support ranges above this, we need to have an identity mapping for the
desired memory range before we can decompress (and later run) the kernel.
32-bit kernels already have the needed identity mapping. This patch adds
identity mappings for the needed memory ranges on 64-bit kernels. This
happens in two possible boot paths:
If loaded via startup_32(), we need to set up the needed identity map.
If loaded from a 64-bit bootloader, the bootloader will have already
set up an identity mapping, and we'll start via the compressed kernel's
startup_64(). In this case, the bootloader's page tables need to be
avoided while selecting the new uncompressed kernel location. If not,
the decompressor could overwrite them during decompression.
To accomplish this, we could walk the pagetable and find every page
that is used, and add them to mem_avoid, but this needs extra code and
will require increasing the size of the mem_avoid array.
Instead, we can create a new set of page tables for our own identity
mapping instead. The pages for the new page table will come from the
_pagetable section of the compressed kernel, which means they are
already contained by in mem_avoid array. To do this, we reuse the code
from the uncompressed kernel's identity mapping routines.
The _pgtable will be shared by both the 32-bit and 64-bit paths to reduce
init_size, as now the compressed kernel's _rodata to _end will contribute
to init_size.
To handle the possible mappings, we need to increase the existing page
table buffer size:
When booting via startup_64(), we need to cover the old VO, params,
cmdline and uncompressed kernel. In an extreme case we could have them
all beyond the 512G boundary, which needs (2+2)*4 pages with 2M mappings.
And we'll need 2 for first 2M for VGA RAM. One more is needed for level4.
This gets us to 19 pages total.
When booting via startup_32(), KASLR could move the uncompressed kernel
above 4G, so we need to create extra identity mappings, which should only
need (2+2) pages at most when it is beyond the 512G boundary. So 19
pages is sufficient for this case as well.
The resulting BOOT_*PGT_SIZE defines use the "_SIZE" suffix on their
names to maintain logical consistency with the existing BOOT_HEAP_SIZE
and BOOT_STACK_SIZE defines.
This patch is based on earlier patches from Yinghai Lu and Baoquan He.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: kernel-hardening@lists.openwall.com
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1462572095-11754-4-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-06 22:01:35 +00:00
|
|
|
|
|
|
|
|
# define BOOT_INIT_PGT_SIZE (6*4096)
|
|
|
|
|
# ifdef CONFIG_RANDOMIZE_BASE
|
|
|
|
|
/*
|
|
|
|
|
* Assuming all cross the 512GB boundary:
|
|
|
|
|
* 1 page for level4
|
|
|
|
|
* (2+2)*4 pages for kernel, param, cmd_line, and randomized kernel
|
|
|
|
|
* 2 pages for first 2M (video RAM: CONFIG_X86_VERBOSE_BOOTUP).
|
|
|
|
|
* Total is 19 pages.
|
|
|
|
|
*/
|
|
|
|
|
# ifdef CONFIG_X86_VERBOSE_BOOTUP
|
|
|
|
|
# define BOOT_PGT_SIZE (19*4096)
|
|
|
|
|
# else /* !CONFIG_X86_VERBOSE_BOOTUP */
|
|
|
|
|
# define BOOT_PGT_SIZE (17*4096)
|
|
|
|
|
# endif
|
|
|
|
|
# else /* !CONFIG_RANDOMIZE_BASE */
|
|
|
|
|
# define BOOT_PGT_SIZE BOOT_INIT_PGT_SIZE
|
|
|
|
|
# endif
|
|
|
|
|
|
2016-05-06 22:01:33 +00:00
|
|
|
#else /* !CONFIG_X86_64 */
|
|
|
|
|
# define BOOT_STACK_SIZE 0x1000
|
2008-04-08 10:54:30 +00:00
|
|
|
#endif
|
|
|
|
|
|
2008-10-23 05:26:29 +00:00
|
|
|
#endif /* _ASM_X86_BOOT_H */
|
