linux/drivers/scsi/mpt3sas/mpi/mpi2_tool.h

481 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2014 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
mpt3sas: MPI2.5 Rev H (2.5.3) specifications Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files 1) Added reserved fields to IO Unit Page 7 for future use. 2) Added optional functionality to IOCInit Request so that the host may specify a separate base address for each Reply Descriptor Post Queue. IOC support for this is indicated using a new IOCCapabilities bit in the IOCFacts Reply. 3) Added Toolbox Console Text Display Tool The host uses the Console Text Display Tool to send a string to IOC's Console using different console types (eg: UART serial terminal or Ethernet terminal). 4) Firmware images can now be signed using an encrypted hash. 5) Added MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL 6) Added more details about configuration page restrictions when Host Based Discovery is enabled Enabling host based discovery affects the availability of some configuration pages and events. The SAS Expander, SAS Device, and SAS Enclosure configuration pages are not available from the IOC. The IOC returns an error status to any Configuration Request message attempting to access these pages. The IOC does not send the SAS Discovery Event, the SAS Topology Change List Event, or the SAS Enclosure Device Status Change Event when host based discovery is enabled. 7) Bit 13 of the SAS IO Unit Page 1 ControlFlags field is now obsolete. It was used to enable limiting direct attached SATA maximum link rate to 1.5 Gbps. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 10:05:28 +00:00
* mpi2_tool.h Version: 02.00.11
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
* and reply messages.
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
* 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
* Post Request.
* 05-25-11 02.00.07 Added Flags field and related defines to
* MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
* 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
* 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
* message.
* 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
* it uses MPI Chain SGE as well as MPI Simple SGE.
mpt3sas: MPI2.5 Rev H (2.5.3) specifications Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files 1) Added reserved fields to IO Unit Page 7 for future use. 2) Added optional functionality to IOCInit Request so that the host may specify a separate base address for each Reply Descriptor Post Queue. IOC support for this is indicated using a new IOCCapabilities bit in the IOCFacts Reply. 3) Added Toolbox Console Text Display Tool The host uses the Console Text Display Tool to send a string to IOC's Console using different console types (eg: UART serial terminal or Ethernet terminal). 4) Firmware images can now be signed using an encrypted hash. 5) Added MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL 6) Added more details about configuration page restrictions when Host Based Discovery is enabled Enabling host based discovery affects the availability of some configuration pages and events. The SAS Expander, SAS Device, and SAS Enclosure configuration pages are not available from the IOC. The IOC returns an error status to any Configuration Request message attempting to access these pages. The IOC does not send the SAS Discovery Event, the SAS Topology Change List Event, or the SAS Enclosure Device Status Change Event when host based discovery is enabled. 7) Bit 13 of the SAS IO Unit Page 1 ControlFlags field is now obsolete. It was used to enable limiting direct attached SATA maximum link rate to 1.5 Gbps. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 10:05:28 +00:00
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_TOOL_H
#define MPI2_TOOL_H
/*****************************************************************************
*
* Toolbox Messages
*
*****************************************************************************/
/*defines for the Tools */
#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
mpt3sas: MPI2.5 Rev H (2.5.3) specifications Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files 1) Added reserved fields to IO Unit Page 7 for future use. 2) Added optional functionality to IOCInit Request so that the host may specify a separate base address for each Reply Descriptor Post Queue. IOC support for this is indicated using a new IOCCapabilities bit in the IOCFacts Reply. 3) Added Toolbox Console Text Display Tool The host uses the Console Text Display Tool to send a string to IOC's Console using different console types (eg: UART serial terminal or Ethernet terminal). 4) Firmware images can now be signed using an encrypted hash. 5) Added MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL 6) Added more details about configuration page restrictions when Host Based Discovery is enabled Enabling host based discovery affects the availability of some configuration pages and events. The SAS Expander, SAS Device, and SAS Enclosure configuration pages are not available from the IOC. The IOC returns an error status to any Configuration Request message attempting to access these pages. The IOC does not send the SAS Discovery Event, the SAS Topology Change List Event, or the SAS Enclosure Device Status Change Event when host based discovery is enabled. 7) Bit 13 of the SAS IO Unit Page 1 ControlFlags field is now obsolete. It was used to enable limiting direct attached SATA maximum link rate to 1.5 Gbps. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 10:05:28 +00:00
#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
/****************************************************************************
* Toolbox reply
****************************************************************************/
typedef struct _MPI2_TOOLBOX_REPLY {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY,
Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t;
/****************************************************************************
* Toolbox Clean Tool request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U32 Flags; /*0x0C */
} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t;
/*values for the Flags field */
#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
/****************************************************************************
* Toolbox Memory Move request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
MPI2_SGE_SIMPLE_UNION SGL; /*0x0C */
} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t;
/****************************************************************************
* Toolbox Diagnostic Data Upload request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U8 SGLFlags; /*0x0C */
U8 Reserved5; /*0x0D */
U16 Reserved6; /*0x0E */
U32 Flags; /*0x10 */
U32 DataLength; /*0x14 */
MPI2_SGE_SIMPLE_UNION SGL; /*0x18 */
} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
*PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
Mpi2ToolboxDiagDataUploadRequest_t,
*pMpi2ToolboxDiagDataUploadRequest_t;
/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
U32 DiagDataLength; /*00h */
U8 FormatCode; /*04h */
U8 Reserved1; /*05h */
U16 Reserved2; /*06h */
} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t;
/****************************************************************************
* Toolbox ISTWI Read Write Tool
****************************************************************************/
/*Toolbox ISTWI Read Write Tool request message */
typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U32 Reserved5; /*0x0C */
U32 Reserved6; /*0x10 */
U8 DevIndex; /*0x14 */
U8 Action; /*0x15 */
U8 SGLFlags; /*0x16 */
U8 Flags; /*0x17 */
U16 TxDataLength; /*0x18 */
U16 RxDataLength; /*0x1A */
U32 Reserved8; /*0x1C */
U32 Reserved9; /*0x20 */
U32 Reserved10; /*0x24 */
U32 Reserved11; /*0x28 */
U32 Reserved12; /*0x2C */
MPI2_SGE_SIMPLE_UNION SGL; /*0x30 */
} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
*PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
Mpi2ToolboxIstwiReadWriteRequest_t,
*pMpi2ToolboxIstwiReadWriteRequest_t;
/*values for the Action field */
#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/*values for the Flags field */
#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
/*Toolbox ISTWI Read Write Tool reply message */
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
U8 DevIndex; /*0x14 */
U8 Action; /*0x15 */
U8 IstwiStatus; /*0x16 */
U8 Reserved6; /*0x17 */
U16 TxDataCount; /*0x18 */
U16 RxDataCount; /*0x1A */
} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY,
Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t;
/****************************************************************************
* Toolbox Beacon Tool request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_BEACON_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U8 Reserved5; /*0x0C */
U8 PhysicalPort; /*0x0D */
U8 Reserved6; /*0x0E */
U8 Flags; /*0x0F */
} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST,
Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t;
/*values for the Flags field */
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
/****************************************************************************
* Toolbox Diagnostic CLI Tool
****************************************************************************/
#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U8 SGLFlags; /*0x0C */
U8 Reserved5; /*0x0D */
U16 Reserved6; /*0x0E */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi2ToolboxDiagnosticCliRequest_t,
*pMpi2ToolboxDiagnosticCliRequest_t;
/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */
typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U32 Reserved5; /*0x0C */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
MPI25_SGE_IO_UNION SGL; /* 0x70 */
} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi25ToolboxDiagnosticCliRequest_t,
*pMpi25ToolboxDiagnosticCliRequest_t;
/*Toolbox Diagnostic CLI Tool reply message */
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
U32 ReturnedDataLength; /*0x14 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
*PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
Mpi2ToolboxDiagnosticCliReply_t,
*pMpi2ToolboxDiagnosticCliReply_t;
mpt3sas: MPI2.5 Rev H (2.5.3) specifications Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files 1) Added reserved fields to IO Unit Page 7 for future use. 2) Added optional functionality to IOCInit Request so that the host may specify a separate base address for each Reply Descriptor Post Queue. IOC support for this is indicated using a new IOCCapabilities bit in the IOCFacts Reply. 3) Added Toolbox Console Text Display Tool The host uses the Console Text Display Tool to send a string to IOC's Console using different console types (eg: UART serial terminal or Ethernet terminal). 4) Firmware images can now be signed using an encrypted hash. 5) Added MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL 6) Added more details about configuration page restrictions when Host Based Discovery is enabled Enabling host based discovery affects the availability of some configuration pages and events. The SAS Expander, SAS Device, and SAS Enclosure configuration pages are not available from the IOC. The IOC returns an error status to any Configuration Request message attempting to access these pages. The IOC does not send the SAS Discovery Event, the SAS Topology Change List Event, or the SAS Enclosure Device Status Change Event when host based discovery is enabled. 7) Bit 13 of the SAS IO Unit Page 1 ControlFlags field is now obsolete. It was used to enable limiting direct attached SATA maximum link rate to 1.5 Gbps. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 10:05:28 +00:00
/****************************************************************************
* Toolbox Console Text Display Tool
****************************************************************************/
/* Toolbox Console Text Display Tool request message */
typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 Console; /* 0x0C */
U8 Flags; /* 0x0D */
U16 Reserved6; /* 0x0E */
U8 TextToDisplay[4]; /* 0x10 */
} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
*PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
Mpi2ToolboxTextDisplayRequest_t,
*pMpi2ToolboxTextDisplayRequest_t;
/* defines for the Console field */
#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0)
#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00)
#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10)
#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20)
#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F)
/* defines for the Flags field */
#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
/*****************************************************************************
*
* Diagnostic Buffer Messages
*
*****************************************************************************/
/****************************************************************************
* Diagnostic Buffer Post request
****************************************************************************/
typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST {
U8 ExtendedType; /*0x00 */
U8 BufferType; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U64 BufferAddress; /*0x0C */
U32 BufferLength; /*0x14 */
U32 Reserved5; /*0x18 */
U32 Reserved6; /*0x1C */
U32 Flags; /*0x20 */
U32 ProductSpecific[23]; /*0x24 */
} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t;
/*values for the ExtendedType field */
#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
/*values for the BufferType field */
#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
/*count of the number of buffer types */
#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
/*values for the Flags field */
#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002)
#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
/****************************************************************************
* Diagnostic Buffer Post reply
****************************************************************************/
typedef struct _MPI2_DIAG_BUFFER_POST_REPLY {
U8 ExtendedType; /*0x00 */
U8 BufferType; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
U32 TransferLength; /*0x14 */
} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY,
Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t;
/****************************************************************************
* Diagnostic Release request
****************************************************************************/
typedef struct _MPI2_DIAG_RELEASE_REQUEST {
U8 Reserved1; /*0x00 */
U8 BufferType; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST,
Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t;
/****************************************************************************
* Diagnostic Buffer Post reply
****************************************************************************/
typedef struct _MPI2_DIAG_RELEASE_REPLY {
U8 Reserved1; /*0x00 */
U8 BufferType; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY,
Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t;
#endif