blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
|
|
|
/*
|
|
|
|
|
* File: arch/blackfin/mach-common/interrupt.S
|
|
|
|
|
* Based on:
|
|
|
|
|
* Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
|
|
|
|
|
* Kenneth Albanowski <kjahds@kjahds.com>
|
|
|
|
|
*
|
|
|
|
|
* Created: ?
|
|
|
|
|
* Description: Interrupt Entries
|
|
|
|
|
*
|
|
|
|
|
* Modified:
|
|
|
|
|
* Copyright 2004-2006 Analog Devices Inc.
|
|
|
|
|
*
|
|
|
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, see the file COPYING, or write
|
|
|
|
|
* to the Free Software Foundation, Inc.,
|
|
|
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <asm/blackfin.h>
|
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
|
#include <linux/autoconf.h>
|
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
|
#include <asm/entry.h>
|
|
|
|
|
#include <asm/asm-offsets.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/mach-common/context.S>
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_I_ENTRY_L1
|
|
|
|
|
.section .l1.text
|
|
|
|
|
#else
|
|
|
|
|
.text
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
.align 4 /* just in case */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* initial interrupt handlers
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef CONFIG_KGDB
|
|
|
|
|
/* interrupt routine for emulation - 0 */
|
|
|
|
|
/* Currently used only if GDB stub is not in - invalid */
|
|
|
|
|
/* gdb-stub set the evt itself */
|
|
|
|
|
/* save registers for post-mortem only */
|
|
|
|
|
ENTRY(_evt_emulation)
|
|
|
|
|
SAVE_ALL_SYS
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
|
fp = 0;
|
|
|
|
|
#endif
|
|
|
|
|
r0 = IRQ_EMU;
|
|
|
|
|
r1 = sp;
|
|
|
|
|
SP += -12;
|
|
|
|
|
call _irq_panic;
|
|
|
|
|
SP += 12;
|
|
|
|
|
/* - GDB stub fills this in by itself (if defined) */
|
|
|
|
|
rte;
|
2007-06-11 07:31:30 +00:00
|
|
|
ENDPROC(_evt_emulation)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Common interrupt entry code. First we do CLI, then push
|
|
|
|
|
* RETI, to keep interrupts disabled, but to allow this state to be changed
|
|
|
|
|
* by local_bh_enable.
|
|
|
|
|
* R0 contains the interrupt number, while R1 may contain the value of IPEND,
|
|
|
|
|
* or garbage if IPEND won't be needed by the ISR. */
|
|
|
|
|
__common_int_entry:
|
|
|
|
|
[--sp] = fp;
|
|
|
|
|
[--sp] = usp;
|
|
|
|
|
|
|
|
|
|
[--sp] = i0;
|
|
|
|
|
[--sp] = i1;
|
|
|
|
|
[--sp] = i2;
|
|
|
|
|
[--sp] = i3;
|
|
|
|
|
|
|
|
|
|
[--sp] = m0;
|
|
|
|
|
[--sp] = m1;
|
|
|
|
|
[--sp] = m2;
|
|
|
|
|
[--sp] = m3;
|
|
|
|
|
|
|
|
|
|
[--sp] = l0;
|
|
|
|
|
[--sp] = l1;
|
|
|
|
|
[--sp] = l2;
|
|
|
|
|
[--sp] = l3;
|
|
|
|
|
|
|
|
|
|
[--sp] = b0;
|
|
|
|
|
[--sp] = b1;
|
|
|
|
|
[--sp] = b2;
|
|
|
|
|
[--sp] = b3;
|
|
|
|
|
[--sp] = a0.x;
|
|
|
|
|
[--sp] = a0.w;
|
|
|
|
|
[--sp] = a1.x;
|
|
|
|
|
[--sp] = a1.w;
|
|
|
|
|
|
|
|
|
|
[--sp] = LC0;
|
|
|
|
|
[--sp] = LC1;
|
|
|
|
|
[--sp] = LT0;
|
|
|
|
|
[--sp] = LT1;
|
|
|
|
|
[--sp] = LB0;
|
|
|
|
|
[--sp] = LB1;
|
|
|
|
|
|
|
|
|
|
[--sp] = ASTAT;
|
|
|
|
|
|
|
|
|
|
[--sp] = r0; /* Skip reserved */
|
|
|
|
|
[--sp] = RETS;
|
|
|
|
|
r2 = RETI;
|
|
|
|
|
[--sp] = r2;
|
|
|
|
|
[--sp] = RETX;
|
|
|
|
|
[--sp] = RETN;
|
|
|
|
|
[--sp] = RETE;
|
|
|
|
|
[--sp] = SEQSTAT;
|
|
|
|
|
[--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */
|
|
|
|
|
|
|
|
|
|
/* Switch to other method of keeping interrupts disabled. */
|
|
|
|
|
#ifdef CONFIG_DEBUG_HWERR
|
|
|
|
|
r1 = 0x3f;
|
|
|
|
|
sti r1;
|
|
|
|
|
#else
|
|
|
|
|
cli r1;
|
|
|
|
|
#endif
|
|
|
|
|
[--sp] = RETI; /* orig_pc */
|
|
|
|
|
/* Clear all L registers. */
|
|
|
|
|
r1 = 0 (x);
|
|
|
|
|
l0 = r1;
|
|
|
|
|
l1 = r1;
|
|
|
|
|
l2 = r1;
|
|
|
|
|
l3 = r1;
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
|
fp = 0;
|
|
|
|
|
#endif
|
|
|
|
|
|
2007-06-21 03:34:16 +00:00
|
|
|
#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
|
|
|
cc = r7 == r7;
|
|
|
|
|
p5.h = 0xffc0;
|
|
|
|
|
p5.l = 0x0014;
|
|
|
|
|
if cc jump 1f;
|
|
|
|
|
r7.l = W[p5];
|
|
|
|
|
1:
|
|
|
|
|
#endif
|
|
|
|
|
r1 = sp;
|
|
|
|
|
SP += -12;
|
|
|
|
|
call _do_irq;
|
|
|
|
|
SP += 12;
|
|
|
|
|
call _return_from_int;
|
|
|
|
|
.Lcommon_restore_context:
|
|
|
|
|
RESTORE_CONTEXT
|
|
|
|
|
rti;
|
|
|
|
|
|
|
|
|
|
/* interrupt routine for ivhw - 5 */
|
|
|
|
|
ENTRY(_evt_ivhw)
|
|
|
|
|
SAVE_CONTEXT
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
|
fp = 0;
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef ANOMALY_05000283
|
|
|
|
|
cc = r7 == r7;
|
|
|
|
|
p5.h = 0xffc0;
|
|
|
|
|
p5.l = 0x0014;
|
|
|
|
|
if cc jump 1f;
|
|
|
|
|
r7.l = W[p5];
|
|
|
|
|
1:
|
|
|
|
|
#endif
|
|
|
|
|
p0.l = lo(TBUFCTL);
|
|
|
|
|
p0.h = hi(TBUFCTL);
|
|
|
|
|
r0 = 1;
|
|
|
|
|
[p0] = r0;
|
|
|
|
|
r0 = IRQ_HWERR;
|
|
|
|
|
r1 = sp;
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_HARDWARE_PM
|
|
|
|
|
r7 = SEQSTAT;
|
|
|
|
|
r7 = r7 >>> 0xe;
|
|
|
|
|
r6 = 0x1F;
|
|
|
|
|
r7 = r7 & r6;
|
|
|
|
|
r5 = 0x12;
|
|
|
|
|
cc = r7 == r5;
|
|
|
|
|
if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
SP += -12;
|
|
|
|
|
call _irq_panic;
|
|
|
|
|
SP += 12;
|
|
|
|
|
rti;
|
|
|
|
|
#ifdef CONFIG_HARDWARE_PM
|
|
|
|
|
.Lcall_do_ovf:
|
|
|
|
|
|
|
|
|
|
SP += -12;
|
|
|
|
|
call _pm_overflow;
|
|
|
|
|
SP += 12;
|
|
|
|
|
|
|
|
|
|
jump .Lcommon_restore_context;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* interrupt routine for evt2 - 2. This is NMI. */
|
|
|
|
|
ENTRY(_evt_evt2)
|
|
|
|
|
SAVE_CONTEXT
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
|
fp = 0;
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef ANOMALY_05000283
|
|
|
|
|
cc = r7 == r7;
|
|
|
|
|
p5.h = 0xffc0;
|
|
|
|
|
p5.l = 0x0014;
|
|
|
|
|
if cc jump 1f;
|
|
|
|
|
r7.l = W[p5];
|
|
|
|
|
1:
|
|
|
|
|
#endif
|
|
|
|
|
r0 = IRQ_NMI;
|
|
|
|
|
r1 = sp;
|
|
|
|
|
SP += -12;
|
|
|
|
|
call _asm_do_IRQ;
|
|
|
|
|
SP += 12;
|
|
|
|
|
RESTORE_CONTEXT
|
|
|
|
|
rtn;
|
|
|
|
|
|
|
|
|
|
/* interrupt routine for core timer - 6 */
|
|
|
|
|
ENTRY(_evt_timer)
|
|
|
|
|
TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
|
|
|
|
|
|
|
|
|
|
/* interrupt routine for evt7 - 7 */
|
|
|
|
|
ENTRY(_evt_evt7)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG7_P)
|
|
|
|
|
ENTRY(_evt_evt8)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG8_P)
|
|
|
|
|
ENTRY(_evt_evt9)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG9_P)
|
|
|
|
|
ENTRY(_evt_evt10)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG10_P)
|
|
|
|
|
ENTRY(_evt_evt11)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG11_P)
|
|
|
|
|
ENTRY(_evt_evt12)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG12_P)
|
|
|
|
|
ENTRY(_evt_evt13)
|
|
|
|
|
INTERRUPT_ENTRY(EVT_IVG13_P)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* interrupt routine for system_call - 15 */
|
|
|
|
|
ENTRY(_evt_system_call)
|
|
|
|
|
SAVE_CONTEXT_SYSCALL
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
|
fp = 0;
|
|
|
|
|
#endif
|
|
|
|
|
call _system_call;
|
|
|
|
|
jump .Lcommon_restore_context;
|
2007-06-11 07:31:30 +00:00
|
|
|
ENDPROC(_evt_system_call)
|
