linux/drivers/acpi/namespace/nssearch.c

380 lines
12 KiB
C
Raw Normal View History

/*******************************************************************************
*
* Module Name: nssearch - Namespace search
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nssearch")
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
/* Local prototypes */
static acpi_status
acpi_ns_search_parent_tree(u32 target_name,
struct acpi_namespace_node *node,
acpi_object_type type,
struct acpi_namespace_node **return_node);
/*******************************************************************************
*
* FUNCTION: acpi_ns_search_node
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* PARAMETERS: target_name - Ascii ACPI name to search for
* Node - Starting node where search will begin
* Type - Object type to match
* return_node - Where the matched Named obj is returned
*
* RETURN: Status
*
* DESCRIPTION: Search a single level of the namespace. Performs a
* simple search of the specified level, and does not add
* entries or search parents.
*
*
* Named object lists are built (and subsequently dumped) in the
* order in which the names are encountered during the namespace load;
*
* All namespace searching is linear in this implementation, but
* could be easily modified to support any improved search
* algorithm. However, the linear search was chosen for simplicity
* and because the trees are small and the other interpreter
* execution overhead is relatively high.
*
******************************************************************************/
acpi_status
acpi_ns_search_node(u32 target_name,
struct acpi_namespace_node *node,
acpi_object_type type,
struct acpi_namespace_node **return_node)
{
struct acpi_namespace_node *next_node;
ACPI_FUNCTION_TRACE("ns_search_node");
#ifdef ACPI_DEBUG_OUTPUT
if (ACPI_LV_NAMES & acpi_dbg_level) {
char *scope_name;
scope_name = acpi_ns_get_external_pathname(node);
if (scope_name) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Searching %s (%p) For [%4.4s] (%s)\n",
scope_name, node, ACPI_CAST_PTR(char,
&target_name),
acpi_ut_get_type_name(type)));
ACPI_MEM_FREE(scope_name);
}
}
#endif
/*
* Search for name at this namespace level, which is to say that we
* must search for the name among the children of this object
*/
next_node = node->child;
while (next_node) {
/* Check for match against the name */
if (next_node->name.integer == target_name) {
/* Resolve a control method alias if any */
if (acpi_ns_get_type(next_node) ==
ACPI_TYPE_LOCAL_METHOD_ALIAS) {
next_node =
ACPI_CAST_PTR(struct acpi_namespace_node,
next_node->object);
}
/*
* Found matching entry.
*/
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Name [%4.4s] (%s) %p found in scope [%4.4s] %p\n",
ACPI_CAST_PTR(char, &target_name),
acpi_ut_get_type_name(next_node->
type),
next_node,
acpi_ut_get_node_name(node), node));
*return_node = next_node;
return_ACPI_STATUS(AE_OK);
}
/*
* The last entry in the list points back to the parent,
* so a flag is used to indicate the end-of-list
*/
if (next_node->flags & ANOBJ_END_OF_PEER_LIST) {
/* Searched entire list, we are done */
break;
}
/* Didn't match name, move on to the next peer object */
next_node = next_node->peer;
}
/* Searched entire namespace level, not found */
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Name [%4.4s] (%s) not found in search in scope [%4.4s] %p first child %p\n",
ACPI_CAST_PTR(char, &target_name),
acpi_ut_get_type_name(type),
acpi_ut_get_node_name(node), node, node->child));
return_ACPI_STATUS(AE_NOT_FOUND);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_search_parent_tree
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* PARAMETERS: target_name - Ascii ACPI name to search for
* Node - Starting node where search will begin
* Type - Object type to match
* return_node - Where the matched Node is returned
*
* RETURN: Status
*
* DESCRIPTION: Called when a name has not been found in the current namespace
* level. Before adding it or giving up, ACPI scope rules require
* searching enclosing scopes in cases identified by acpi_ns_local().
*
* "A name is located by finding the matching name in the current
* name space, and then in the parent name space. If the parent
* name space does not contain the name, the search continues
* recursively until either the name is found or the name space
* does not have a parent (the root of the name space). This
* indicates that the name is not found" (From ACPI Specification,
* section 5.3)
*
******************************************************************************/
static acpi_status
acpi_ns_search_parent_tree(u32 target_name,
struct acpi_namespace_node *node,
acpi_object_type type,
struct acpi_namespace_node **return_node)
{
acpi_status status;
struct acpi_namespace_node *parent_node;
ACPI_FUNCTION_TRACE("ns_search_parent_tree");
parent_node = acpi_ns_get_parent_node(node);
/*
* If there is no parent (i.e., we are at the root) or type is "local",
* we won't be searching the parent tree.
*/
if (!parent_node) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "[%4.4s] has no parent\n",
ACPI_CAST_PTR(char, &target_name)));
return_ACPI_STATUS(AE_NOT_FOUND);
}
if (acpi_ns_local(type)) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"[%4.4s] type [%s] must be local to this scope (no parent search)\n",
ACPI_CAST_PTR(char, &target_name),
acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_NOT_FOUND);
}
/* Search the parent tree */
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Searching parent [%4.4s] for [%4.4s]\n",
acpi_ut_get_node_name(parent_node),
ACPI_CAST_PTR(char, &target_name)));
/*
* Search parents until target is found or we have backed up to the root
*/
while (parent_node) {
/*
* Search parent scope. Use TYPE_ANY because we don't care about the
* object type at this point, we only care about the existence of
* the actual name we are searching for. Typechecking comes later.
*/
status = acpi_ns_search_node(target_name, parent_node,
ACPI_TYPE_ANY, return_node);
if (ACPI_SUCCESS(status)) {
return_ACPI_STATUS(status);
}
/*
* Not found here, go up another level
* (until we reach the root)
*/
parent_node = acpi_ns_get_parent_node(parent_node);
}
/* Not found in parent tree */
return_ACPI_STATUS(AE_NOT_FOUND);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_search_and_enter
*
* PARAMETERS: target_name - Ascii ACPI name to search for (4 chars)
* walk_state - Current state of the walk
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* Node - Starting node where search will begin
* interpreter_mode - Add names only in ACPI_MODE_LOAD_PASS_x.
* Otherwise,search only.
* Type - Object type to match
* Flags - Flags describing the search restrictions
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* return_node - Where the Node is returned
*
* RETURN: Status
*
* DESCRIPTION: Search for a name segment in a single namespace level,
* optionally adding it if it is not found. If the passed
* Type is not Any and the type previously stored in the
* entry was Any (i.e. unknown), update the stored type.
*
* In ACPI_IMODE_EXECUTE, search only.
* In other modes, search and add if not found.
*
******************************************************************************/
acpi_status
acpi_ns_search_and_enter(u32 target_name,
struct acpi_walk_state *walk_state,
struct acpi_namespace_node *node,
acpi_interpreter_mode interpreter_mode,
acpi_object_type type,
u32 flags, struct acpi_namespace_node **return_node)
{
acpi_status status;
struct acpi_namespace_node *new_node;
ACPI_FUNCTION_TRACE("ns_search_and_enter");
/* Parameter validation */
if (!node || !target_name || !return_node) {
ACPI_REPORT_ERROR(("Null param: Node %p Name %X return_node %p\n", node, target_name, return_node));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Name must consist of printable characters */
if (!acpi_ut_valid_acpi_name(target_name)) {
ACPI_REPORT_ERROR(("Bad character in ACPI Name: %X\n",
target_name));
return_ACPI_STATUS(AE_BAD_CHARACTER);
}
/* Try to find the name in the namespace level specified by the caller */
*return_node = ACPI_ENTRY_NOT_FOUND;
status = acpi_ns_search_node(target_name, node, type, return_node);
if (status != AE_NOT_FOUND) {
/*
* If we found it AND the request specifies that a find is an error,
* return the error
*/
if ((status == AE_OK) && (flags & ACPI_NS_ERROR_IF_FOUND)) {
status = AE_ALREADY_EXISTS;
}
/*
* Either found it or there was an error
* -- finished either way
*/
return_ACPI_STATUS(status);
}
/*
* The name was not found. If we are NOT performing the first pass
* (name entry) of loading the namespace, search the parent tree (all the
* way to the root if necessary.) We don't want to perform the parent
* search when the namespace is actually being loaded. We want to perform
* the search when namespace references are being resolved (load pass 2)
* and during the execution phase.
*/
if ((interpreter_mode != ACPI_IMODE_LOAD_PASS1) &&
(flags & ACPI_NS_SEARCH_PARENT)) {
/*
* Not found at this level - search parent tree according to the
* ACPI specification
*/
status =
acpi_ns_search_parent_tree(target_name, node, type,
return_node);
if (ACPI_SUCCESS(status)) {
return_ACPI_STATUS(status);
}
}
/*
* In execute mode, just search, never add names. Exit now.
*/
if (interpreter_mode == ACPI_IMODE_EXECUTE) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"%4.4s Not found in %p [Not adding]\n",
ACPI_CAST_PTR(char, &target_name), node));
return_ACPI_STATUS(AE_NOT_FOUND);
}
/* Create the new named object */
new_node = acpi_ns_create_node(target_name);
if (!new_node) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Install the new object into the parent's list of children */
acpi_ns_install_node(walk_state, node, new_node, type);
*return_node = new_node;
return_ACPI_STATUS(AE_OK);
}