leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
28b671b4ba
linux/arch/arm/mach-imx/ssi-fiq.S

148 lines
2.9 KiB
ArmAsm
Raw Normal View History

ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
/*
* Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* r8 = bit 0-15: tx offset, bit 16-31: tx buffer size
* r9 = bit 0-15: rx offset, bit 16-31: rx buffer size
*/
#define SSI_STX0 0x00
#define SSI_SRX0 0x08
#define SSI_SISR 0x14
#define SSI_SIER 0x18
#define SSI_SACNT 0x38
#define SSI_SACNT_AC97EN (1 << 0)
#define SSI_SIER_TFE0_EN (1 << 0)
#define SSI_SISR_TFE0 (1 << 0)
#define SSI_SISR_RFF0 (1 << 2)
#define SSI_SIER_RFF0_EN (1 << 2)
.text
.global imx_ssi_fiq_start
.global imx_ssi_fiq_end
.global imx_ssi_fiq_base
.global imx_ssi_fiq_rx_buffer
.global imx_ssi_fiq_tx_buffer
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
/*
* imx_ssi_fiq_start is _intentionally_ not marked as a function symbol
* using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to
* mark the function body so that it can be copied to the FIQ vector in
* the vectors page. imx_ssi_fiq_start should only be called as the result
* of an FIQ: calling it directly will not work.
*/
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
imx_ssi_fiq_start:
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r12, .L_imx_ssi_fiq_base
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
/* TX */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r13, .L_imx_ssi_fiq_tx_buffer
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
/* shall we send? */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SIER]
tst r11, #SSI_SIER_TFE0_EN
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
beq 1f
/* TX FIFO empty? */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SISR]
tst r11, #SSI_SISR_TFE0
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
beq 1f
mov r10, #0x10000
sub r10, #1
and r10, r10, r8 /* r10: current buffer offset */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
add r13, r13, r10
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrh r11, [r13]
strh r11, [r12, #SSI_STX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrh r11, [r13, #2]
strh r11, [r12, #SSI_STX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrh r11, [r13, #4]
strh r11, [r12, #SSI_STX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrh r11, [r13, #6]
strh r11, [r12, #SSI_STX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
add r10, #8
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
lsr r11, r8, #16 /* r11: buffer size */
cmp r10, r11
lslgt r8, r11, #16
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
addle r8, #8
1:
/* RX */
/* shall we receive? */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SIER]
tst r11, #SSI_SIER_RFF0_EN
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
beq 1f
/* RX FIFO full? */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SISR]
tst r11, #SSI_SISR_RFF0
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
beq 1f
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r13, .L_imx_ssi_fiq_rx_buffer
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
mov r10, #0x10000
sub r10, #1
and r10, r10, r9 /* r10: current buffer offset */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
add r13, r13, r10
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SACNT]
tst r11, #SSI_SACNT_AC97EN
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SRX0]
strh r11, [r13]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SRX0]
strh r11, [r13, #2]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
/* dummy read to skip slot 12 */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrne r11, [r12, #SSI_SRX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SRX0]
strh r11, [r13, #4]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldr r11, [r12, #SSI_SRX0]
strh r11, [r13, #6]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
/* dummy read to skip slot 12 */
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
ldrne r11, [r12, #SSI_SRX0]
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
add r10, #8
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
lsr r11, r9, #16 /* r11: buffer size */
cmp r10, r11
lslgt r9, r11, #16
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
addle r9, #8
1:
@ return from FIQ
subs pc, lr, #4
ARM: mxc: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> LAKML-Reference: 1289913217-8672-1-git-send-email-dave.martin@linaro.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-16 13:13:37 +00:00
.align
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
.L_imx_ssi_fiq_base:
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
imx_ssi_fiq_base:
.word 0x0
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
.L_imx_ssi_fiq_rx_buffer:
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
imx_ssi_fiq_rx_buffer:
.word 0x0
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
.L_imx_ssi_fiq_tx_buffer:
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
imx_ssi_fiq_tx_buffer:
.word 0x0
ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-10 11:53:24 +00:00
.L_imx_ssi_fiq_end:
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 15:41:04 +00:00
imx_ssi_fiq_end:
Revert "arm: move exports to definitions" This reverts commit 4dd1837d7589f468ed109556513f476e7a7f9121. Moving the exports for assembly code into the assembly files breaks KSYM trimming, but also breaks modversions. While fixing the KSYM trimming is trivial, fixing modversions brings us to a technically worse position that we had prior to the above change: - We end up with the prototype definitions divorsed from everything else, which means that adding or removing assembly level ksyms become more fragile: * if adding a new assembly ksyms export, a missed prototype in asm-prototypes.h results in a successful build if no module in the selected configuration makes use of the symbol. * when removing a ksyms export, asm-prototypes.h will get forgotten, with armksyms.c, you'll get a build error if you forget to touch the file. - We end up with the same amount of include files and prototypes, they're just in a header file instead of a .c file with their exports. As for lines of code, we don't get much of a size reduction: (original commit) 47 files changed, 131 insertions(+), 208 deletions(-) (fix for ksyms trimming) 7 files changed, 18 insertions(+), 5 deletions(-) (two fixes for modversions) 1 file changed, 34 insertions(+) 3 files changed, 7 insertions(+), 2 deletions(-) which results in a net total of only 25 lines deleted. As there does not seem to be much benefit from this change of approach, revert the change. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-11-23 10:00:03 +00:00
Reference in New Issue Copy Permalink