2008-01-24 18:38:38 +00:00
|
|
|
/*
|
|
|
|
* Wireless utility functions
|
|
|
|
*
|
2009-04-20 12:31:42 +00:00
|
|
|
* Copyright 2007-2009 Johannes Berg <johannes@sipsolutions.net>
|
2008-01-24 18:38:38 +00:00
|
|
|
*/
|
2011-07-15 15:47:34 +00:00
|
|
|
#include <linux/export.h>
|
2009-04-20 12:31:42 +00:00
|
|
|
#include <linux/bitops.h>
|
2009-05-21 13:47:03 +00:00
|
|
|
#include <linux/etherdevice.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2009-04-20 12:31:42 +00:00
|
|
|
#include <net/cfg80211.h>
|
2009-05-21 13:47:03 +00:00
|
|
|
#include <net/ip.h>
|
2011-12-22 20:55:08 +00:00
|
|
|
#include <net/dsfield.h>
|
2013-08-26 12:04:52 +00:00
|
|
|
#include <linux/if_vlan.h>
|
2008-01-24 18:38:38 +00:00
|
|
|
#include "core.h"
|
2012-06-27 14:19:42 +00:00
|
|
|
#include "rdev-ops.h"
|
|
|
|
|
2008-01-24 18:38:38 +00:00
|
|
|
|
2008-10-29 19:00:45 +00:00
|
|
|
struct ieee80211_rate *
|
|
|
|
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
|
2009-01-21 14:13:48 +00:00
|
|
|
u32 basic_rates, int bitrate)
|
2008-10-29 19:00:45 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_rate *result = &sband->bitrates[0];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
if (!(basic_rates & BIT(i)))
|
|
|
|
continue;
|
|
|
|
if (sband->bitrates[i].bitrate > bitrate)
|
|
|
|
continue;
|
|
|
|
result = &sband->bitrates[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_get_response_rate);
|
|
|
|
|
2013-07-08 14:55:54 +00:00
|
|
|
u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband,
|
|
|
|
enum nl80211_bss_scan_width scan_width)
|
2013-05-11 00:50:51 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_rate *bitrates;
|
|
|
|
u32 mandatory_rates = 0;
|
|
|
|
enum ieee80211_rate_flags mandatory_flag;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (WARN_ON(!sband))
|
|
|
|
return 1;
|
|
|
|
|
2013-07-08 14:55:54 +00:00
|
|
|
if (sband->band == IEEE80211_BAND_2GHZ) {
|
|
|
|
if (scan_width == NL80211_BSS_CHAN_WIDTH_5 ||
|
|
|
|
scan_width == NL80211_BSS_CHAN_WIDTH_10)
|
|
|
|
mandatory_flag = IEEE80211_RATE_MANDATORY_G;
|
|
|
|
else
|
|
|
|
mandatory_flag = IEEE80211_RATE_MANDATORY_B;
|
|
|
|
} else {
|
2013-05-11 00:50:51 +00:00
|
|
|
mandatory_flag = IEEE80211_RATE_MANDATORY_A;
|
2013-07-08 14:55:54 +00:00
|
|
|
}
|
2013-05-11 00:50:51 +00:00
|
|
|
|
|
|
|
bitrates = sband->bitrates;
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++)
|
|
|
|
if (bitrates[i].flags & mandatory_flag)
|
|
|
|
mandatory_rates |= BIT(i);
|
|
|
|
return mandatory_rates;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_mandatory_rates);
|
|
|
|
|
2011-01-17 04:37:28 +00:00
|
|
|
int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band)
|
2008-01-24 18:38:38 +00:00
|
|
|
{
|
2011-01-17 04:37:28 +00:00
|
|
|
/* see 802.11 17.3.8.3.2 and Annex J
|
|
|
|
* there are overlapping channel numbers in 5GHz and 2GHz bands */
|
2012-07-02 06:32:32 +00:00
|
|
|
if (chan <= 0)
|
|
|
|
return 0; /* not supported */
|
|
|
|
switch (band) {
|
|
|
|
case IEEE80211_BAND_2GHZ:
|
2011-01-17 04:37:28 +00:00
|
|
|
if (chan == 14)
|
|
|
|
return 2484;
|
|
|
|
else if (chan < 14)
|
|
|
|
return 2407 + chan * 5;
|
2012-07-02 06:32:32 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_BAND_5GHZ:
|
|
|
|
if (chan >= 182 && chan <= 196)
|
|
|
|
return 4000 + chan * 5;
|
2011-01-17 04:37:28 +00:00
|
|
|
else
|
2012-07-02 06:32:32 +00:00
|
|
|
return 5000 + chan * 5;
|
|
|
|
break;
|
|
|
|
case IEEE80211_BAND_60GHZ:
|
|
|
|
if (chan < 5)
|
|
|
|
return 56160 + chan * 2160;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
;
|
2011-01-17 04:37:28 +00:00
|
|
|
}
|
2012-07-02 06:32:32 +00:00
|
|
|
return 0; /* not supported */
|
2008-01-24 18:38:38 +00:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_channel_to_frequency);
|
|
|
|
|
|
|
|
int ieee80211_frequency_to_channel(int freq)
|
|
|
|
{
|
2011-01-17 04:37:28 +00:00
|
|
|
/* see 802.11 17.3.8.3.2 and Annex J */
|
2008-01-24 18:38:38 +00:00
|
|
|
if (freq == 2484)
|
|
|
|
return 14;
|
2011-01-17 04:37:28 +00:00
|
|
|
else if (freq < 2484)
|
2008-01-24 18:38:38 +00:00
|
|
|
return (freq - 2407) / 5;
|
2011-01-17 04:37:28 +00:00
|
|
|
else if (freq >= 4910 && freq <= 4980)
|
|
|
|
return (freq - 4000) / 5;
|
2012-07-02 06:32:32 +00:00
|
|
|
else if (freq <= 45000) /* DMG band lower limit */
|
2011-01-17 04:37:28 +00:00
|
|
|
return (freq - 5000) / 5;
|
2012-07-02 06:32:32 +00:00
|
|
|
else if (freq >= 58320 && freq <= 64800)
|
|
|
|
return (freq - 56160) / 2160;
|
|
|
|
else
|
|
|
|
return 0;
|
2008-01-24 18:38:38 +00:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_frequency_to_channel);
|
|
|
|
|
2008-03-26 13:14:55 +00:00
|
|
|
struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
|
|
|
|
int freq)
|
2008-03-16 17:34:33 +00:00
|
|
|
{
|
|
|
|
enum ieee80211_band band;
|
|
|
|
struct ieee80211_supported_band *sband;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
|
|
|
|
sband = wiphy->bands[band];
|
|
|
|
|
|
|
|
if (!sband)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
|
|
if (sband->channels[i].center_freq == freq)
|
|
|
|
return &sband->channels[i];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
2008-03-26 13:14:55 +00:00
|
|
|
EXPORT_SYMBOL(__ieee80211_get_channel);
|
2008-03-16 17:34:33 +00:00
|
|
|
|
2008-01-24 18:38:38 +00:00
|
|
|
static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,
|
|
|
|
enum ieee80211_band band)
|
|
|
|
{
|
|
|
|
int i, want;
|
|
|
|
|
|
|
|
switch (band) {
|
|
|
|
case IEEE80211_BAND_5GHZ:
|
|
|
|
want = 3;
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
if (sband->bitrates[i].bitrate == 60 ||
|
|
|
|
sband->bitrates[i].bitrate == 120 ||
|
|
|
|
sband->bitrates[i].bitrate == 240) {
|
|
|
|
sband->bitrates[i].flags |=
|
|
|
|
IEEE80211_RATE_MANDATORY_A;
|
|
|
|
want--;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
WARN_ON(want);
|
|
|
|
break;
|
|
|
|
case IEEE80211_BAND_2GHZ:
|
|
|
|
want = 7;
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
if (sband->bitrates[i].bitrate == 10) {
|
|
|
|
sband->bitrates[i].flags |=
|
|
|
|
IEEE80211_RATE_MANDATORY_B |
|
|
|
|
IEEE80211_RATE_MANDATORY_G;
|
|
|
|
want--;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sband->bitrates[i].bitrate == 20 ||
|
|
|
|
sband->bitrates[i].bitrate == 55 ||
|
|
|
|
sband->bitrates[i].bitrate == 110 ||
|
|
|
|
sband->bitrates[i].bitrate == 60 ||
|
|
|
|
sband->bitrates[i].bitrate == 120 ||
|
|
|
|
sband->bitrates[i].bitrate == 240) {
|
|
|
|
sband->bitrates[i].flags |=
|
|
|
|
IEEE80211_RATE_MANDATORY_G;
|
|
|
|
want--;
|
|
|
|
}
|
|
|
|
|
2008-01-30 16:36:10 +00:00
|
|
|
if (sband->bitrates[i].bitrate != 10 &&
|
|
|
|
sband->bitrates[i].bitrate != 20 &&
|
|
|
|
sband->bitrates[i].bitrate != 55 &&
|
|
|
|
sband->bitrates[i].bitrate != 110)
|
2008-01-24 18:38:38 +00:00
|
|
|
sband->bitrates[i].flags |=
|
|
|
|
IEEE80211_RATE_ERP_G;
|
|
|
|
}
|
2008-02-02 22:53:10 +00:00
|
|
|
WARN_ON(want != 0 && want != 3 && want != 6);
|
2008-01-24 18:38:38 +00:00
|
|
|
break;
|
2012-07-02 06:32:32 +00:00
|
|
|
case IEEE80211_BAND_60GHZ:
|
|
|
|
/* check for mandatory HT MCS 1..4 */
|
|
|
|
WARN_ON(!sband->ht_cap.ht_supported);
|
|
|
|
WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e);
|
|
|
|
break;
|
2008-01-24 18:38:38 +00:00
|
|
|
case IEEE80211_NUM_BANDS:
|
|
|
|
WARN_ON(1);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ieee80211_set_bitrate_flags(struct wiphy *wiphy)
|
|
|
|
{
|
|
|
|
enum ieee80211_band band;
|
|
|
|
|
|
|
|
for (band = 0; band < IEEE80211_NUM_BANDS; band++)
|
|
|
|
if (wiphy->bands[band])
|
|
|
|
set_mandatory_flags_band(wiphy->bands[band], band);
|
|
|
|
}
|
2009-05-11 11:54:58 +00:00
|
|
|
|
2011-09-21 15:14:56 +00:00
|
|
|
bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < wiphy->n_cipher_suites; i++)
|
|
|
|
if (cipher == wiphy->cipher_suites[i])
|
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
|
|
|
|
struct key_params *params, int key_idx,
|
2010-10-05 17:39:30 +00:00
|
|
|
bool pairwise, const u8 *mac_addr)
|
2009-05-11 11:54:58 +00:00
|
|
|
{
|
|
|
|
if (key_idx > 5)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2010-10-05 17:39:30 +00:00
|
|
|
if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (pairwise && !mac_addr)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2009-05-11 11:54:58 +00:00
|
|
|
/*
|
|
|
|
* Disallow pairwise keys with non-zero index unless it's WEP
|
2011-01-25 10:21:22 +00:00
|
|
|
* or a vendor specific cipher (because current deployments use
|
|
|
|
* pairwise WEP keys with non-zero indices and for vendor specific
|
|
|
|
* ciphers this should be validated in the driver or hardware level
|
|
|
|
* - but 802.11i clearly specifies to use zero)
|
2009-05-11 11:54:58 +00:00
|
|
|
*/
|
2010-10-05 17:39:30 +00:00
|
|
|
if (pairwise && key_idx &&
|
2011-01-25 10:21:22 +00:00
|
|
|
((params->cipher == WLAN_CIPHER_SUITE_TKIP) ||
|
|
|
|
(params->cipher == WLAN_CIPHER_SUITE_CCMP) ||
|
|
|
|
(params->cipher == WLAN_CIPHER_SUITE_AES_CMAC)))
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (params->cipher) {
|
|
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
2009-05-24 14:57:19 +00:00
|
|
|
if (params->key_len != WLAN_KEY_LEN_WEP40)
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
2009-05-24 14:57:19 +00:00
|
|
|
if (params->key_len != WLAN_KEY_LEN_TKIP)
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
2009-05-24 14:57:19 +00:00
|
|
|
if (params->key_len != WLAN_KEY_LEN_CCMP)
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
2009-05-24 14:57:19 +00:00
|
|
|
if (params->key_len != WLAN_KEY_LEN_WEP104)
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
2009-05-24 14:57:19 +00:00
|
|
|
if (params->key_len != WLAN_KEY_LEN_AES_CMAC)
|
2009-05-11 11:54:58 +00:00
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
default:
|
2010-08-27 11:26:51 +00:00
|
|
|
/*
|
|
|
|
* We don't know anything about this algorithm,
|
|
|
|
* allow using it -- but the driver must check
|
|
|
|
* all parameters! We still check below whether
|
|
|
|
* or not the driver supports this algorithm,
|
|
|
|
* of course.
|
|
|
|
*/
|
|
|
|
break;
|
2009-05-11 11:54:58 +00:00
|
|
|
}
|
|
|
|
|
2009-05-15 09:38:32 +00:00
|
|
|
if (params->seq) {
|
|
|
|
switch (params->cipher) {
|
|
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
|
|
/* These ciphers do not use key sequence */
|
|
|
|
return -EINVAL;
|
|
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
|
|
|
if (params->seq_len != 6)
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-09-21 15:14:56 +00:00
|
|
|
if (!cfg80211_supported_cipher_suite(&rdev->wiphy, params->cipher))
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2009-05-11 11:54:58 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2009-05-21 13:47:03 +00:00
|
|
|
|
2010-08-12 12:49:58 +00:00
|
|
|
unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc)
|
2009-05-21 13:47:03 +00:00
|
|
|
{
|
|
|
|
unsigned int hdrlen = 24;
|
|
|
|
|
|
|
|
if (ieee80211_is_data(fc)) {
|
|
|
|
if (ieee80211_has_a4(fc))
|
|
|
|
hdrlen = 30;
|
2010-01-20 11:55:06 +00:00
|
|
|
if (ieee80211_is_data_qos(fc)) {
|
2009-05-21 13:47:03 +00:00
|
|
|
hdrlen += IEEE80211_QOS_CTL_LEN;
|
2010-01-20 11:55:06 +00:00
|
|
|
if (ieee80211_has_order(fc))
|
|
|
|
hdrlen += IEEE80211_HT_CTL_LEN;
|
|
|
|
}
|
2009-05-21 13:47:03 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ieee80211_is_ctl(fc)) {
|
|
|
|
/*
|
|
|
|
* ACK and CTS are 10 bytes, all others 16. To see how
|
|
|
|
* to get this condition consider
|
|
|
|
* subtype mask: 0b0000000011110000 (0x00F0)
|
|
|
|
* ACK subtype: 0b0000000011010000 (0x00D0)
|
|
|
|
* CTS subtype: 0b0000000011000000 (0x00C0)
|
|
|
|
* bits that matter: ^^^ (0x00E0)
|
|
|
|
* value of those: 0b0000000011000000 (0x00C0)
|
|
|
|
*/
|
|
|
|
if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
|
|
|
|
hdrlen = 10;
|
|
|
|
else
|
|
|
|
hdrlen = 16;
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
return hdrlen;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_hdrlen);
|
|
|
|
|
|
|
|
unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
const struct ieee80211_hdr *hdr =
|
|
|
|
(const struct ieee80211_hdr *)skb->data;
|
|
|
|
unsigned int hdrlen;
|
|
|
|
|
|
|
|
if (unlikely(skb->len < 10))
|
|
|
|
return 0;
|
|
|
|
hdrlen = ieee80211_hdrlen(hdr->frame_control);
|
|
|
|
if (unlikely(hdrlen > skb->len))
|
|
|
|
return 0;
|
|
|
|
return hdrlen;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
|
|
|
|
|
2012-10-25 22:36:40 +00:00
|
|
|
unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
|
2009-05-21 13:47:03 +00:00
|
|
|
{
|
|
|
|
int ae = meshhdr->flags & MESH_FLAGS_AE;
|
2012-10-25 19:51:59 +00:00
|
|
|
/* 802.11-2012, 8.2.4.7.3 */
|
2009-05-21 13:47:03 +00:00
|
|
|
switch (ae) {
|
2012-10-25 19:51:59 +00:00
|
|
|
default:
|
2009-05-21 13:47:03 +00:00
|
|
|
case 0:
|
|
|
|
return 6;
|
2009-08-10 19:15:48 +00:00
|
|
|
case MESH_FLAGS_AE_A4:
|
2009-05-21 13:47:03 +00:00
|
|
|
return 12;
|
2009-08-10 19:15:48 +00:00
|
|
|
case MESH_FLAGS_AE_A5_A6:
|
2009-05-21 13:47:03 +00:00
|
|
|
return 18;
|
|
|
|
}
|
|
|
|
}
|
2012-10-25 22:36:40 +00:00
|
|
|
EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
|
2009-05-21 13:47:03 +00:00
|
|
|
|
2009-12-01 02:18:37 +00:00
|
|
|
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
|
2009-05-21 13:47:03 +00:00
|
|
|
enum nl80211_iftype iftype)
|
|
|
|
{
|
|
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
|
|
|
|
u16 hdrlen, ethertype;
|
|
|
|
u8 *payload;
|
|
|
|
u8 dst[ETH_ALEN];
|
|
|
|
u8 src[ETH_ALEN] __aligned(2);
|
|
|
|
|
|
|
|
if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
hdrlen = ieee80211_hdrlen(hdr->frame_control);
|
|
|
|
|
|
|
|
/* convert IEEE 802.11 header + possible LLC headers into Ethernet
|
|
|
|
* header
|
|
|
|
* IEEE 802.11 address fields:
|
|
|
|
* ToDS FromDS Addr1 Addr2 Addr3 Addr4
|
|
|
|
* 0 0 DA SA BSSID n/a
|
|
|
|
* 0 1 DA BSSID SA n/a
|
|
|
|
* 1 0 BSSID SA DA n/a
|
|
|
|
* 1 1 RA TA DA SA
|
|
|
|
*/
|
|
|
|
memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
|
|
|
|
memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
|
|
|
|
|
|
|
|
switch (hdr->frame_control &
|
|
|
|
cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
|
|
|
|
case cpu_to_le16(IEEE80211_FCTL_TODS):
|
|
|
|
if (unlikely(iftype != NL80211_IFTYPE_AP &&
|
2010-09-16 12:58:22 +00:00
|
|
|
iftype != NL80211_IFTYPE_AP_VLAN &&
|
|
|
|
iftype != NL80211_IFTYPE_P2P_GO))
|
2009-05-21 13:47:03 +00:00
|
|
|
return -1;
|
|
|
|
break;
|
|
|
|
case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
|
|
|
|
if (unlikely(iftype != NL80211_IFTYPE_WDS &&
|
2009-11-10 19:10:05 +00:00
|
|
|
iftype != NL80211_IFTYPE_MESH_POINT &&
|
|
|
|
iftype != NL80211_IFTYPE_AP_VLAN &&
|
|
|
|
iftype != NL80211_IFTYPE_STATION))
|
2009-05-21 13:47:03 +00:00
|
|
|
return -1;
|
|
|
|
if (iftype == NL80211_IFTYPE_MESH_POINT) {
|
|
|
|
struct ieee80211s_hdr *meshdr =
|
|
|
|
(struct ieee80211s_hdr *) (skb->data + hdrlen);
|
2010-03-29 09:35:07 +00:00
|
|
|
/* make sure meshdr->flags is on the linear part */
|
|
|
|
if (!pskb_may_pull(skb, hdrlen + 1))
|
|
|
|
return -1;
|
2012-10-25 19:51:59 +00:00
|
|
|
if (meshdr->flags & MESH_FLAGS_AE_A4)
|
|
|
|
return -1;
|
2009-05-21 13:47:03 +00:00
|
|
|
if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
|
2010-03-29 09:35:07 +00:00
|
|
|
skb_copy_bits(skb, hdrlen +
|
|
|
|
offsetof(struct ieee80211s_hdr, eaddr1),
|
|
|
|
dst, ETH_ALEN);
|
|
|
|
skb_copy_bits(skb, hdrlen +
|
|
|
|
offsetof(struct ieee80211s_hdr, eaddr2),
|
|
|
|
src, ETH_ALEN);
|
2009-05-21 13:47:03 +00:00
|
|
|
}
|
2010-03-29 09:35:07 +00:00
|
|
|
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
|
2009-05-21 13:47:03 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case cpu_to_le16(IEEE80211_FCTL_FROMDS):
|
2009-08-10 19:15:48 +00:00
|
|
|
if ((iftype != NL80211_IFTYPE_STATION &&
|
2010-09-16 12:58:22 +00:00
|
|
|
iftype != NL80211_IFTYPE_P2P_CLIENT &&
|
|
|
|
iftype != NL80211_IFTYPE_MESH_POINT) ||
|
2009-05-21 13:47:03 +00:00
|
|
|
(is_multicast_ether_addr(dst) &&
|
2012-05-08 18:56:56 +00:00
|
|
|
ether_addr_equal(src, addr)))
|
2009-05-21 13:47:03 +00:00
|
|
|
return -1;
|
2009-08-10 19:15:48 +00:00
|
|
|
if (iftype == NL80211_IFTYPE_MESH_POINT) {
|
|
|
|
struct ieee80211s_hdr *meshdr =
|
|
|
|
(struct ieee80211s_hdr *) (skb->data + hdrlen);
|
2010-03-29 09:35:07 +00:00
|
|
|
/* make sure meshdr->flags is on the linear part */
|
|
|
|
if (!pskb_may_pull(skb, hdrlen + 1))
|
|
|
|
return -1;
|
2012-10-25 19:51:59 +00:00
|
|
|
if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
|
|
|
|
return -1;
|
2009-08-10 19:15:48 +00:00
|
|
|
if (meshdr->flags & MESH_FLAGS_AE_A4)
|
2010-03-29 09:35:07 +00:00
|
|
|
skb_copy_bits(skb, hdrlen +
|
|
|
|
offsetof(struct ieee80211s_hdr, eaddr1),
|
|
|
|
src, ETH_ALEN);
|
|
|
|
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
|
2009-08-10 19:15:48 +00:00
|
|
|
}
|
2009-05-21 13:47:03 +00:00
|
|
|
break;
|
|
|
|
case cpu_to_le16(0):
|
2011-09-28 11:12:54 +00:00
|
|
|
if (iftype != NL80211_IFTYPE_ADHOC &&
|
|
|
|
iftype != NL80211_IFTYPE_STATION)
|
|
|
|
return -1;
|
2009-05-21 13:47:03 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2010-03-29 09:35:07 +00:00
|
|
|
if (!pskb_may_pull(skb, hdrlen + 8))
|
2009-05-21 13:47:03 +00:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
payload = skb->data + hdrlen;
|
|
|
|
ethertype = (payload[6] << 8) | payload[7];
|
|
|
|
|
2012-05-08 18:56:56 +00:00
|
|
|
if (likely((ether_addr_equal(payload, rfc1042_header) &&
|
2009-05-21 13:47:03 +00:00
|
|
|
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
|
2012-05-08 18:56:56 +00:00
|
|
|
ether_addr_equal(payload, bridge_tunnel_header))) {
|
2009-05-21 13:47:03 +00:00
|
|
|
/* remove RFC1042 or Bridge-Tunnel encapsulation and
|
|
|
|
* replace EtherType */
|
|
|
|
skb_pull(skb, hdrlen + 6);
|
|
|
|
memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
|
|
|
|
memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
|
|
|
|
} else {
|
|
|
|
struct ethhdr *ehdr;
|
|
|
|
__be16 len;
|
|
|
|
|
|
|
|
skb_pull(skb, hdrlen);
|
|
|
|
len = htons(skb->len);
|
|
|
|
ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
|
|
|
|
memcpy(ehdr->h_dest, dst, ETH_ALEN);
|
|
|
|
memcpy(ehdr->h_source, src, ETH_ALEN);
|
|
|
|
ehdr->h_proto = len;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_data_to_8023);
|
|
|
|
|
2009-12-01 02:18:37 +00:00
|
|
|
int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
|
2009-05-21 13:47:03 +00:00
|
|
|
enum nl80211_iftype iftype, u8 *bssid, bool qos)
|
|
|
|
{
|
|
|
|
struct ieee80211_hdr hdr;
|
|
|
|
u16 hdrlen, ethertype;
|
|
|
|
__le16 fc;
|
|
|
|
const u8 *encaps_data;
|
|
|
|
int encaps_len, skip_header_bytes;
|
|
|
|
int nh_pos, h_pos;
|
|
|
|
int head_need;
|
|
|
|
|
|
|
|
if (unlikely(skb->len < ETH_HLEN))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
nh_pos = skb_network_header(skb) - skb->data;
|
|
|
|
h_pos = skb_transport_header(skb) - skb->data;
|
|
|
|
|
|
|
|
/* convert Ethernet header to proper 802.11 header (based on
|
|
|
|
* operation mode) */
|
|
|
|
ethertype = (skb->data[12] << 8) | skb->data[13];
|
|
|
|
fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
|
|
|
|
|
|
|
|
switch (iftype) {
|
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
case NL80211_IFTYPE_AP_VLAN:
|
2010-09-16 12:58:22 +00:00
|
|
|
case NL80211_IFTYPE_P2P_GO:
|
2009-05-21 13:47:03 +00:00
|
|
|
fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
|
|
|
|
/* DA BSSID SA */
|
|
|
|
memcpy(hdr.addr1, skb->data, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr2, addr, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
|
|
|
|
hdrlen = 24;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_STATION:
|
2010-09-16 12:58:22 +00:00
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
2009-05-21 13:47:03 +00:00
|
|
|
fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
|
|
|
|
/* BSSID SA DA */
|
|
|
|
memcpy(hdr.addr1, bssid, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr3, skb->data, ETH_ALEN);
|
|
|
|
hdrlen = 24;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
/* DA SA BSSID */
|
|
|
|
memcpy(hdr.addr1, skb->data, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
|
|
|
|
memcpy(hdr.addr3, bssid, ETH_ALEN);
|
|
|
|
hdrlen = 24;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (qos) {
|
|
|
|
fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
|
|
|
|
hdrlen += 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdr.frame_control = fc;
|
|
|
|
hdr.duration_id = 0;
|
|
|
|
hdr.seq_ctrl = 0;
|
|
|
|
|
|
|
|
skip_header_bytes = ETH_HLEN;
|
|
|
|
if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
|
|
|
|
encaps_data = bridge_tunnel_header;
|
|
|
|
encaps_len = sizeof(bridge_tunnel_header);
|
|
|
|
skip_header_bytes -= 2;
|
2013-03-28 04:38:25 +00:00
|
|
|
} else if (ethertype >= ETH_P_802_3_MIN) {
|
2009-05-21 13:47:03 +00:00
|
|
|
encaps_data = rfc1042_header;
|
|
|
|
encaps_len = sizeof(rfc1042_header);
|
|
|
|
skip_header_bytes -= 2;
|
|
|
|
} else {
|
|
|
|
encaps_data = NULL;
|
|
|
|
encaps_len = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb_pull(skb, skip_header_bytes);
|
|
|
|
nh_pos -= skip_header_bytes;
|
|
|
|
h_pos -= skip_header_bytes;
|
|
|
|
|
|
|
|
head_need = hdrlen + encaps_len - skb_headroom(skb);
|
|
|
|
|
|
|
|
if (head_need > 0 || skb_cloned(skb)) {
|
|
|
|
head_need = max(head_need, 0);
|
|
|
|
if (head_need)
|
|
|
|
skb_orphan(skb);
|
|
|
|
|
2011-08-29 21:17:41 +00:00
|
|
|
if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC))
|
2009-05-21 13:47:03 +00:00
|
|
|
return -ENOMEM;
|
2011-08-29 21:17:41 +00:00
|
|
|
|
2009-05-21 13:47:03 +00:00
|
|
|
skb->truesize += head_need;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (encaps_data) {
|
|
|
|
memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
|
|
|
|
nh_pos += encaps_len;
|
|
|
|
h_pos += encaps_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
|
|
|
|
|
|
|
|
nh_pos += hdrlen;
|
|
|
|
h_pos += hdrlen;
|
|
|
|
|
|
|
|
/* Update skb pointers to various headers since this modified frame
|
|
|
|
* is going to go through Linux networking code that may potentially
|
|
|
|
* need things like pointer to IP header. */
|
|
|
|
skb_set_mac_header(skb, 0);
|
|
|
|
skb_set_network_header(skb, nh_pos);
|
|
|
|
skb_set_transport_header(skb, h_pos);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_data_from_8023);
|
|
|
|
|
2009-12-01 02:18:37 +00:00
|
|
|
|
|
|
|
void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
|
|
|
|
const u8 *addr, enum nl80211_iftype iftype,
|
2011-05-13 18:22:31 +00:00
|
|
|
const unsigned int extra_headroom,
|
|
|
|
bool has_80211_header)
|
2009-12-01 02:18:37 +00:00
|
|
|
{
|
|
|
|
struct sk_buff *frame = NULL;
|
|
|
|
u16 ethertype;
|
|
|
|
u8 *payload;
|
|
|
|
const struct ethhdr *eth;
|
|
|
|
int remaining, err;
|
|
|
|
u8 dst[ETH_ALEN], src[ETH_ALEN];
|
|
|
|
|
2011-05-13 18:22:31 +00:00
|
|
|
if (has_80211_header) {
|
|
|
|
err = ieee80211_data_to_8023(skb, addr, iftype);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
2009-12-01 02:18:37 +00:00
|
|
|
|
2011-05-13 18:22:31 +00:00
|
|
|
/* skip the wrapping header */
|
|
|
|
eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
|
|
|
|
if (!eth)
|
|
|
|
goto out;
|
|
|
|
} else {
|
|
|
|
eth = (struct ethhdr *) skb->data;
|
|
|
|
}
|
2009-12-01 02:18:37 +00:00
|
|
|
|
|
|
|
while (skb != frame) {
|
|
|
|
u8 padding;
|
|
|
|
__be16 len = eth->h_proto;
|
|
|
|
unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len);
|
|
|
|
|
|
|
|
remaining = skb->len;
|
|
|
|
memcpy(dst, eth->h_dest, ETH_ALEN);
|
|
|
|
memcpy(src, eth->h_source, ETH_ALEN);
|
|
|
|
|
|
|
|
padding = (4 - subframe_len) & 0x3;
|
|
|
|
/* the last MSDU has no padding */
|
|
|
|
if (subframe_len > remaining)
|
|
|
|
goto purge;
|
|
|
|
|
|
|
|
skb_pull(skb, sizeof(struct ethhdr));
|
|
|
|
/* reuse skb for the last subframe */
|
|
|
|
if (remaining <= subframe_len + padding)
|
|
|
|
frame = skb;
|
|
|
|
else {
|
|
|
|
unsigned int hlen = ALIGN(extra_headroom, 4);
|
|
|
|
/*
|
|
|
|
* Allocate and reserve two bytes more for payload
|
|
|
|
* alignment since sizeof(struct ethhdr) is 14.
|
|
|
|
*/
|
|
|
|
frame = dev_alloc_skb(hlen + subframe_len + 2);
|
|
|
|
if (!frame)
|
|
|
|
goto purge;
|
|
|
|
|
|
|
|
skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
|
|
|
|
memcpy(skb_put(frame, ntohs(len)), skb->data,
|
|
|
|
ntohs(len));
|
|
|
|
|
|
|
|
eth = (struct ethhdr *)skb_pull(skb, ntohs(len) +
|
|
|
|
padding);
|
|
|
|
if (!eth) {
|
|
|
|
dev_kfree_skb(frame);
|
|
|
|
goto purge;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
skb_reset_network_header(frame);
|
|
|
|
frame->dev = skb->dev;
|
|
|
|
frame->priority = skb->priority;
|
|
|
|
|
|
|
|
payload = frame->data;
|
|
|
|
ethertype = (payload[6] << 8) | payload[7];
|
|
|
|
|
wireless: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
I removed a conversion from scan.c/cmp_bss_core
that appears to be a sorting function.
Done via cocci script:
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:55 +00:00
|
|
|
if (likely((ether_addr_equal(payload, rfc1042_header) &&
|
2009-12-01 02:18:37 +00:00
|
|
|
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
|
wireless: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
I removed a conversion from scan.c/cmp_bss_core
that appears to be a sorting function.
Done via cocci script:
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:55 +00:00
|
|
|
ether_addr_equal(payload, bridge_tunnel_header))) {
|
2009-12-01 02:18:37 +00:00
|
|
|
/* remove RFC1042 or Bridge-Tunnel
|
|
|
|
* encapsulation and replace EtherType */
|
|
|
|
skb_pull(frame, 6);
|
|
|
|
memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
|
|
|
|
memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
|
|
|
|
} else {
|
|
|
|
memcpy(skb_push(frame, sizeof(__be16)), &len,
|
|
|
|
sizeof(__be16));
|
|
|
|
memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
|
|
|
|
memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
|
|
|
|
}
|
|
|
|
__skb_queue_tail(list, frame);
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
purge:
|
|
|
|
__skb_queue_purge(list);
|
|
|
|
out:
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_amsdu_to_8023s);
|
|
|
|
|
2009-05-21 13:47:03 +00:00
|
|
|
/* Given a data frame determine the 802.1p/1d tag to use. */
|
|
|
|
unsigned int cfg80211_classify8021d(struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
unsigned int dscp;
|
2013-08-26 12:04:52 +00:00
|
|
|
unsigned char vlan_priority;
|
2009-05-21 13:47:03 +00:00
|
|
|
|
|
|
|
/* skb->priority values from 256->263 are magic values to
|
|
|
|
* directly indicate a specific 802.1d priority. This is used
|
|
|
|
* to allow 802.1d priority to be passed directly in from VLAN
|
|
|
|
* tags, etc.
|
|
|
|
*/
|
|
|
|
if (skb->priority >= 256 && skb->priority <= 263)
|
|
|
|
return skb->priority - 256;
|
|
|
|
|
2013-08-26 12:04:52 +00:00
|
|
|
if (vlan_tx_tag_present(skb)) {
|
|
|
|
vlan_priority = (vlan_tx_tag_get(skb) & VLAN_PRIO_MASK)
|
|
|
|
>> VLAN_PRIO_SHIFT;
|
|
|
|
if (vlan_priority > 0)
|
|
|
|
return vlan_priority;
|
|
|
|
}
|
|
|
|
|
2009-05-21 13:47:03 +00:00
|
|
|
switch (skb->protocol) {
|
|
|
|
case htons(ETH_P_IP):
|
2011-12-22 20:55:08 +00:00
|
|
|
dscp = ipv4_get_dsfield(ip_hdr(skb)) & 0xfc;
|
|
|
|
break;
|
|
|
|
case htons(ETH_P_IPV6):
|
|
|
|
dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & 0xfc;
|
2009-05-21 13:47:03 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return dscp >> 5;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfg80211_classify8021d);
|
2009-07-02 15:18:40 +00:00
|
|
|
|
|
|
|
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie)
|
|
|
|
{
|
2012-11-29 00:25:20 +00:00
|
|
|
const struct cfg80211_bss_ies *ies;
|
|
|
|
|
|
|
|
ies = rcu_dereference(bss->ies);
|
|
|
|
if (!ies)
|
2009-07-02 15:18:40 +00:00
|
|
|
return NULL;
|
2012-11-29 00:25:20 +00:00
|
|
|
|
|
|
|
return cfg80211_find_ie(ie, ies->data, ies->len);
|
2009-07-02 15:18:40 +00:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_bss_get_ie);
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
|
|
|
|
void cfg80211_upload_connect_keys(struct wireless_dev *wdev)
|
|
|
|
{
|
|
|
|
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
|
|
|
|
struct net_device *dev = wdev->netdev;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!wdev->connect_keys)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
if (!wdev->connect_keys->params[i].cipher)
|
|
|
|
continue;
|
2012-06-27 14:19:42 +00:00
|
|
|
if (rdev_add_key(rdev, dev, i, false, NULL,
|
|
|
|
&wdev->connect_keys->params[i])) {
|
2010-11-17 03:56:49 +00:00
|
|
|
netdev_err(dev, "failed to set key %d\n", i);
|
2009-07-20 08:12:57 +00:00
|
|
|
continue;
|
|
|
|
}
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
if (wdev->connect_keys->def == i)
|
2012-06-27 14:19:42 +00:00
|
|
|
if (rdev_set_default_key(rdev, dev, i, true, true)) {
|
2010-11-17 03:56:49 +00:00
|
|
|
netdev_err(dev, "failed to set defkey %d\n", i);
|
2009-07-20 08:12:57 +00:00
|
|
|
continue;
|
|
|
|
}
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
if (wdev->connect_keys->defmgmt == i)
|
2012-06-27 14:19:42 +00:00
|
|
|
if (rdev_set_default_mgmt_key(rdev, dev, i))
|
2010-11-17 03:56:49 +00:00
|
|
|
netdev_err(dev, "failed to set mgtdef %d\n", i);
|
cfg80211: rework key operation
This reworks the key operation in cfg80211, and now only
allows, from userspace, configuring keys (via nl80211)
after the connection has been established (in managed
mode), the IBSS been joined (in IBSS mode), at any time
(in AP[_VLAN] modes) or never for all the other modes.
In order to do shared key authentication correctly, it
is now possible to give a WEP key to the AUTH command.
To configure static WEP keys, these are given to the
CONNECT or IBSS_JOIN command directly, for a userspace
SME it is assumed it will configure it properly after
the connection has been established.
Since mac80211 used to check the default key in IBSS
mode to see whether or not the network is protected,
it needs an update in that area, as well as an update
to make use of the WEP key passed to auth() for shared
key authentication.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 12:22:54 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
kfree(wdev->connect_keys);
|
|
|
|
wdev->connect_keys = NULL;
|
|
|
|
}
|
2009-08-21 12:51:05 +00:00
|
|
|
|
2012-08-02 17:41:48 +00:00
|
|
|
void cfg80211_process_wdev_events(struct wireless_dev *wdev)
|
2009-08-21 12:51:05 +00:00
|
|
|
{
|
|
|
|
struct cfg80211_event *ev;
|
|
|
|
unsigned long flags;
|
|
|
|
const u8 *bssid = NULL;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wdev->event_lock, flags);
|
|
|
|
while (!list_empty(&wdev->event_list)) {
|
|
|
|
ev = list_first_entry(&wdev->event_list,
|
|
|
|
struct cfg80211_event, list);
|
|
|
|
list_del(&ev->list);
|
|
|
|
spin_unlock_irqrestore(&wdev->event_lock, flags);
|
|
|
|
|
|
|
|
wdev_lock(wdev);
|
|
|
|
switch (ev->type) {
|
|
|
|
case EVENT_CONNECT_RESULT:
|
|
|
|
if (!is_zero_ether_addr(ev->cr.bssid))
|
|
|
|
bssid = ev->cr.bssid;
|
|
|
|
__cfg80211_connect_result(
|
|
|
|
wdev->netdev, bssid,
|
|
|
|
ev->cr.req_ie, ev->cr.req_ie_len,
|
|
|
|
ev->cr.resp_ie, ev->cr.resp_ie_len,
|
|
|
|
ev->cr.status,
|
|
|
|
ev->cr.status == WLAN_STATUS_SUCCESS,
|
|
|
|
NULL);
|
|
|
|
break;
|
|
|
|
case EVENT_ROAMED:
|
2011-12-08 08:58:47 +00:00
|
|
|
__cfg80211_roamed(wdev, ev->rm.bss, ev->rm.req_ie,
|
|
|
|
ev->rm.req_ie_len, ev->rm.resp_ie,
|
|
|
|
ev->rm.resp_ie_len);
|
2009-08-21 12:51:05 +00:00
|
|
|
break;
|
|
|
|
case EVENT_DISCONNECTED:
|
|
|
|
__cfg80211_disconnected(wdev->netdev,
|
|
|
|
ev->dc.ie, ev->dc.ie_len,
|
|
|
|
ev->dc.reason, true);
|
|
|
|
break;
|
|
|
|
case EVENT_IBSS_JOINED:
|
|
|
|
__cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
wdev_unlock(wdev);
|
|
|
|
|
|
|
|
kfree(ev);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wdev->event_lock, flags);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&wdev->event_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev)
|
|
|
|
{
|
|
|
|
struct wireless_dev *wdev;
|
|
|
|
|
|
|
|
ASSERT_RTNL();
|
|
|
|
ASSERT_RDEV_LOCK(rdev);
|
|
|
|
|
2012-06-15 12:33:17 +00:00
|
|
|
list_for_each_entry(wdev, &rdev->wdev_list, list)
|
2009-08-21 12:51:05 +00:00
|
|
|
cfg80211_process_wdev_events(wdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
|
|
|
|
struct net_device *dev, enum nl80211_iftype ntype,
|
|
|
|
u32 *flags, struct vif_params *params)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
enum nl80211_iftype otype = dev->ieee80211_ptr->iftype;
|
|
|
|
|
|
|
|
ASSERT_RDEV_LOCK(rdev);
|
|
|
|
|
|
|
|
/* don't support changing VLANs, you just re-create them */
|
|
|
|
if (otype == NL80211_IFTYPE_AP_VLAN)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2012-06-15 22:19:54 +00:00
|
|
|
/* cannot change into P2P device type */
|
|
|
|
if (ntype == NL80211_IFTYPE_P2P_DEVICE)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2009-08-21 12:51:05 +00:00
|
|
|
if (!rdev->ops->change_virtual_intf ||
|
|
|
|
!(rdev->wiphy.interface_modes & (1 << ntype)))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
/* if it's part of a bridge, reject changing type to station/ibss */
|
2010-06-15 06:50:45 +00:00
|
|
|
if ((dev->priv_flags & IFF_BRIDGE_PORT) &&
|
2010-09-16 12:58:22 +00:00
|
|
|
(ntype == NL80211_IFTYPE_ADHOC ||
|
|
|
|
ntype == NL80211_IFTYPE_STATION ||
|
|
|
|
ntype == NL80211_IFTYPE_P2P_CLIENT))
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
return -EBUSY;
|
|
|
|
|
2012-06-08 08:55:44 +00:00
|
|
|
if (ntype != otype && netif_running(dev)) {
|
2011-05-13 08:58:57 +00:00
|
|
|
err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
|
|
|
|
ntype);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2009-11-19 10:55:19 +00:00
|
|
|
dev->ieee80211_ptr->use_4addr = false;
|
2010-12-03 08:20:44 +00:00
|
|
|
dev->ieee80211_ptr->mesh_id_up_len = 0;
|
2009-11-19 10:55:19 +00:00
|
|
|
|
2009-08-21 12:51:05 +00:00
|
|
|
switch (otype) {
|
2012-06-29 10:46:57 +00:00
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
cfg80211_stop_ap(rdev, dev);
|
|
|
|
break;
|
2009-08-21 12:51:05 +00:00
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
cfg80211_leave_ibss(rdev, dev, false);
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_STATION:
|
2010-09-16 12:58:22 +00:00
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
2013-05-15 15:44:01 +00:00
|
|
|
wdev_lock(dev->ieee80211_ptr);
|
2009-08-21 12:51:05 +00:00
|
|
|
cfg80211_disconnect(rdev, dev,
|
|
|
|
WLAN_REASON_DEAUTH_LEAVING, true);
|
2013-05-15 15:44:01 +00:00
|
|
|
wdev_unlock(dev->ieee80211_ptr);
|
2009-08-21 12:51:05 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
/* mesh should be handled? */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg80211_process_rdev_events(rdev);
|
|
|
|
}
|
|
|
|
|
2012-06-27 14:19:42 +00:00
|
|
|
err = rdev_change_virtual_intf(rdev, dev, ntype, flags, params);
|
2009-08-21 12:51:05 +00:00
|
|
|
|
|
|
|
WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype);
|
|
|
|
|
2009-11-19 10:55:19 +00:00
|
|
|
if (!err && params && params->use_4addr != -1)
|
|
|
|
dev->ieee80211_ptr->use_4addr = params->use_4addr;
|
|
|
|
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
if (!err) {
|
|
|
|
dev->priv_flags &= ~IFF_DONT_BRIDGE;
|
|
|
|
switch (ntype) {
|
|
|
|
case NL80211_IFTYPE_STATION:
|
|
|
|
if (dev->ieee80211_ptr->use_4addr)
|
|
|
|
break;
|
|
|
|
/* fall through */
|
2010-09-16 12:58:22 +00:00
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
dev->priv_flags |= IFF_DONT_BRIDGE;
|
|
|
|
break;
|
2010-09-16 12:58:22 +00:00
|
|
|
case NL80211_IFTYPE_P2P_GO:
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
|
|
case NL80211_IFTYPE_WDS:
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
/* bridging OK */
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_MONITOR:
|
|
|
|
/* monitor can't bridge anyway */
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
2010-08-12 13:38:38 +00:00
|
|
|
case NUM_NL80211_IFTYPES:
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
/* not happening */
|
|
|
|
break;
|
2012-06-15 22:19:54 +00:00
|
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
|
|
WARN_ON(1);
|
|
|
|
break;
|
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 23:56:30 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-06-29 10:47:01 +00:00
|
|
|
if (!err && ntype != otype && netif_running(dev)) {
|
|
|
|
cfg80211_update_iface_num(rdev, ntype, 1);
|
|
|
|
cfg80211_update_iface_num(rdev, otype, -1);
|
|
|
|
}
|
|
|
|
|
2009-08-21 12:51:05 +00:00
|
|
|
return err;
|
|
|
|
}
|
2009-12-09 21:43:52 +00:00
|
|
|
|
2012-07-05 11:25:50 +00:00
|
|
|
static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
|
|
|
|
{
|
|
|
|
static const u32 __mcs2bitrate[] = {
|
|
|
|
/* control PHY */
|
|
|
|
[0] = 275,
|
|
|
|
/* SC PHY */
|
|
|
|
[1] = 3850,
|
|
|
|
[2] = 7700,
|
|
|
|
[3] = 9625,
|
|
|
|
[4] = 11550,
|
|
|
|
[5] = 12512, /* 1251.25 mbps */
|
|
|
|
[6] = 15400,
|
|
|
|
[7] = 19250,
|
|
|
|
[8] = 23100,
|
|
|
|
[9] = 25025,
|
|
|
|
[10] = 30800,
|
|
|
|
[11] = 38500,
|
|
|
|
[12] = 46200,
|
|
|
|
/* OFDM PHY */
|
|
|
|
[13] = 6930,
|
|
|
|
[14] = 8662, /* 866.25 mbps */
|
|
|
|
[15] = 13860,
|
|
|
|
[16] = 17325,
|
|
|
|
[17] = 20790,
|
|
|
|
[18] = 27720,
|
|
|
|
[19] = 34650,
|
|
|
|
[20] = 41580,
|
|
|
|
[21] = 45045,
|
|
|
|
[22] = 51975,
|
|
|
|
[23] = 62370,
|
|
|
|
[24] = 67568, /* 6756.75 mbps */
|
|
|
|
/* LP-SC PHY */
|
|
|
|
[25] = 6260,
|
|
|
|
[26] = 8340,
|
|
|
|
[27] = 11120,
|
|
|
|
[28] = 12510,
|
|
|
|
[29] = 16680,
|
|
|
|
[30] = 22240,
|
|
|
|
[31] = 25030,
|
|
|
|
};
|
|
|
|
|
|
|
|
if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return __mcs2bitrate[rate->mcs];
|
|
|
|
}
|
|
|
|
|
2012-11-09 13:56:41 +00:00
|
|
|
static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate)
|
|
|
|
{
|
|
|
|
static const u32 base[4][10] = {
|
|
|
|
{ 6500000,
|
|
|
|
13000000,
|
|
|
|
19500000,
|
|
|
|
26000000,
|
|
|
|
39000000,
|
|
|
|
52000000,
|
|
|
|
58500000,
|
|
|
|
65000000,
|
|
|
|
78000000,
|
|
|
|
0,
|
|
|
|
},
|
|
|
|
{ 13500000,
|
|
|
|
27000000,
|
|
|
|
40500000,
|
|
|
|
54000000,
|
|
|
|
81000000,
|
|
|
|
108000000,
|
|
|
|
121500000,
|
|
|
|
135000000,
|
|
|
|
162000000,
|
|
|
|
180000000,
|
|
|
|
},
|
|
|
|
{ 29300000,
|
|
|
|
58500000,
|
|
|
|
87800000,
|
|
|
|
117000000,
|
|
|
|
175500000,
|
|
|
|
234000000,
|
|
|
|
263300000,
|
|
|
|
292500000,
|
|
|
|
351000000,
|
|
|
|
390000000,
|
|
|
|
},
|
|
|
|
{ 58500000,
|
|
|
|
117000000,
|
|
|
|
175500000,
|
|
|
|
234000000,
|
|
|
|
351000000,
|
|
|
|
468000000,
|
|
|
|
526500000,
|
|
|
|
585000000,
|
|
|
|
702000000,
|
|
|
|
780000000,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
u32 bitrate;
|
|
|
|
int idx;
|
|
|
|
|
|
|
|
if (WARN_ON_ONCE(rate->mcs > 9))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
idx = rate->flags & (RATE_INFO_FLAGS_160_MHZ_WIDTH |
|
|
|
|
RATE_INFO_FLAGS_80P80_MHZ_WIDTH) ? 3 :
|
|
|
|
rate->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH ? 2 :
|
|
|
|
rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH ? 1 : 0;
|
|
|
|
|
|
|
|
bitrate = base[idx][rate->mcs];
|
|
|
|
bitrate *= rate->nss;
|
|
|
|
|
|
|
|
if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
|
|
|
|
bitrate = (bitrate / 9) * 10;
|
|
|
|
|
|
|
|
/* do NOT round down here */
|
|
|
|
return (bitrate + 50000) / 100000;
|
|
|
|
}
|
|
|
|
|
2012-07-05 11:25:49 +00:00
|
|
|
u32 cfg80211_calculate_bitrate(struct rate_info *rate)
|
2009-12-09 21:43:52 +00:00
|
|
|
{
|
|
|
|
int modulation, streams, bitrate;
|
|
|
|
|
2012-11-09 13:56:41 +00:00
|
|
|
if (!(rate->flags & RATE_INFO_FLAGS_MCS) &&
|
|
|
|
!(rate->flags & RATE_INFO_FLAGS_VHT_MCS))
|
2009-12-09 21:43:52 +00:00
|
|
|
return rate->legacy;
|
2012-07-05 11:25:50 +00:00
|
|
|
if (rate->flags & RATE_INFO_FLAGS_60G)
|
|
|
|
return cfg80211_calculate_bitrate_60g(rate);
|
2012-11-09 13:56:41 +00:00
|
|
|
if (rate->flags & RATE_INFO_FLAGS_VHT_MCS)
|
|
|
|
return cfg80211_calculate_bitrate_vht(rate);
|
2009-12-09 21:43:52 +00:00
|
|
|
|
|
|
|
/* the formula below does only work for MCS values smaller than 32 */
|
2012-05-08 19:36:20 +00:00
|
|
|
if (WARN_ON_ONCE(rate->mcs >= 32))
|
2009-12-09 21:43:52 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
modulation = rate->mcs & 7;
|
|
|
|
streams = (rate->mcs >> 3) + 1;
|
|
|
|
|
|
|
|
bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
|
|
|
|
13500000 : 6500000;
|
|
|
|
|
|
|
|
if (modulation < 4)
|
|
|
|
bitrate *= (modulation + 1);
|
|
|
|
else if (modulation == 4)
|
|
|
|
bitrate *= (modulation + 2);
|
|
|
|
else
|
|
|
|
bitrate *= (modulation + 3);
|
|
|
|
|
|
|
|
bitrate *= streams;
|
|
|
|
|
|
|
|
if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
|
|
|
|
bitrate = (bitrate / 9) * 10;
|
|
|
|
|
|
|
|
/* do NOT round down here */
|
|
|
|
return (bitrate + 50000) / 100000;
|
|
|
|
}
|
2012-03-05 23:31:47 +00:00
|
|
|
EXPORT_SYMBOL(cfg80211_calculate_bitrate);
|
2011-05-09 16:41:15 +00:00
|
|
|
|
2012-11-25 18:13:28 +00:00
|
|
|
int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len,
|
|
|
|
enum ieee80211_p2p_attr_id attr,
|
|
|
|
u8 *buf, unsigned int bufsize)
|
2012-10-29 18:48:40 +00:00
|
|
|
{
|
|
|
|
u8 *out = buf;
|
|
|
|
u16 attr_remaining = 0;
|
|
|
|
bool desired_attr = false;
|
|
|
|
u16 desired_len = 0;
|
|
|
|
|
|
|
|
while (len > 0) {
|
|
|
|
unsigned int iedatalen;
|
|
|
|
unsigned int copy;
|
|
|
|
const u8 *iedata;
|
|
|
|
|
|
|
|
if (len < 2)
|
|
|
|
return -EILSEQ;
|
|
|
|
iedatalen = ies[1];
|
|
|
|
if (iedatalen + 2 > len)
|
|
|
|
return -EILSEQ;
|
|
|
|
|
|
|
|
if (ies[0] != WLAN_EID_VENDOR_SPECIFIC)
|
|
|
|
goto cont;
|
|
|
|
|
|
|
|
if (iedatalen < 4)
|
|
|
|
goto cont;
|
|
|
|
|
|
|
|
iedata = ies + 2;
|
|
|
|
|
|
|
|
/* check WFA OUI, P2P subtype */
|
|
|
|
if (iedata[0] != 0x50 || iedata[1] != 0x6f ||
|
|
|
|
iedata[2] != 0x9a || iedata[3] != 0x09)
|
|
|
|
goto cont;
|
|
|
|
|
|
|
|
iedatalen -= 4;
|
|
|
|
iedata += 4;
|
|
|
|
|
|
|
|
/* check attribute continuation into this IE */
|
|
|
|
copy = min_t(unsigned int, attr_remaining, iedatalen);
|
|
|
|
if (copy && desired_attr) {
|
|
|
|
desired_len += copy;
|
|
|
|
if (out) {
|
|
|
|
memcpy(out, iedata, min(bufsize, copy));
|
|
|
|
out += min(bufsize, copy);
|
|
|
|
bufsize -= min(bufsize, copy);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
if (copy == attr_remaining)
|
|
|
|
return desired_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
attr_remaining -= copy;
|
|
|
|
if (attr_remaining)
|
|
|
|
goto cont;
|
|
|
|
|
|
|
|
iedatalen -= copy;
|
|
|
|
iedata += copy;
|
|
|
|
|
|
|
|
while (iedatalen > 0) {
|
|
|
|
u16 attr_len;
|
|
|
|
|
|
|
|
/* P2P attribute ID & size must fit */
|
|
|
|
if (iedatalen < 3)
|
|
|
|
return -EILSEQ;
|
|
|
|
desired_attr = iedata[0] == attr;
|
|
|
|
attr_len = get_unaligned_le16(iedata + 1);
|
|
|
|
iedatalen -= 3;
|
|
|
|
iedata += 3;
|
|
|
|
|
|
|
|
copy = min_t(unsigned int, attr_len, iedatalen);
|
|
|
|
|
|
|
|
if (desired_attr) {
|
|
|
|
desired_len += copy;
|
|
|
|
if (out) {
|
|
|
|
memcpy(out, iedata, min(bufsize, copy));
|
|
|
|
out += min(bufsize, copy);
|
|
|
|
bufsize -= min(bufsize, copy);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (copy == attr_len)
|
|
|
|
return desired_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
iedata += copy;
|
|
|
|
iedatalen -= copy;
|
|
|
|
attr_remaining = attr_len - copy;
|
|
|
|
}
|
|
|
|
|
|
|
|
cont:
|
|
|
|
len -= ies[1] + 2;
|
|
|
|
ies += ies[1] + 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (attr_remaining && desired_attr)
|
|
|
|
return -EILSEQ;
|
|
|
|
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfg80211_get_p2p_attr);
|
|
|
|
|
2012-08-01 15:00:55 +00:00
|
|
|
bool ieee80211_operating_class_to_band(u8 operating_class,
|
|
|
|
enum ieee80211_band *band)
|
|
|
|
{
|
|
|
|
switch (operating_class) {
|
|
|
|
case 112:
|
|
|
|
case 115 ... 127:
|
|
|
|
*band = IEEE80211_BAND_5GHZ;
|
|
|
|
return true;
|
|
|
|
case 81:
|
|
|
|
case 82:
|
|
|
|
case 83:
|
|
|
|
case 84:
|
|
|
|
*band = IEEE80211_BAND_2GHZ;
|
|
|
|
return true;
|
2013-04-23 06:54:21 +00:00
|
|
|
case 180:
|
|
|
|
*band = IEEE80211_BAND_60GHZ;
|
|
|
|
return true;
|
2012-08-01 15:00:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_operating_class_to_band);
|
|
|
|
|
2011-05-09 16:41:15 +00:00
|
|
|
int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
|
|
|
|
u32 beacon_int)
|
|
|
|
{
|
|
|
|
struct wireless_dev *wdev;
|
|
|
|
int res = 0;
|
|
|
|
|
|
|
|
if (!beacon_int)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2012-06-15 12:33:17 +00:00
|
|
|
list_for_each_entry(wdev, &rdev->wdev_list, list) {
|
2011-05-09 16:41:15 +00:00
|
|
|
if (!wdev->beacon_interval)
|
|
|
|
continue;
|
|
|
|
if (wdev->beacon_interval != beacon_int) {
|
|
|
|
res = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
2011-05-13 08:58:57 +00:00
|
|
|
|
2012-06-29 10:47:07 +00:00
|
|
|
int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
enum nl80211_iftype iftype,
|
|
|
|
struct ieee80211_channel *chan,
|
2013-01-08 13:04:07 +00:00
|
|
|
enum cfg80211_chan_mode chanmode,
|
|
|
|
u8 radar_detect)
|
2011-05-13 08:58:57 +00:00
|
|
|
{
|
|
|
|
struct wireless_dev *wdev_iter;
|
2012-06-05 10:16:50 +00:00
|
|
|
u32 used_iftypes = BIT(iftype);
|
2011-05-13 08:58:57 +00:00
|
|
|
int num[NUM_NL80211_IFTYPES];
|
2012-06-29 10:47:07 +00:00
|
|
|
struct ieee80211_channel
|
|
|
|
*used_channels[CFG80211_MAX_NUM_DIFFERENT_CHANNELS];
|
|
|
|
struct ieee80211_channel *ch;
|
|
|
|
enum cfg80211_chan_mode chmode;
|
|
|
|
int num_different_channels = 0;
|
2011-05-13 08:58:57 +00:00
|
|
|
int total = 1;
|
2013-10-07 16:41:05 +00:00
|
|
|
bool radar_required = false;
|
2011-05-13 08:58:57 +00:00
|
|
|
int i, j;
|
|
|
|
|
|
|
|
ASSERT_RTNL();
|
|
|
|
|
2013-01-08 13:04:07 +00:00
|
|
|
if (WARN_ON(hweight32(radar_detect) > 1))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (iftype) {
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
|
|
case NL80211_IFTYPE_WDS:
|
2013-10-07 16:41:05 +00:00
|
|
|
/* if the interface could potentially choose a DFS channel,
|
|
|
|
* then mark DFS as required.
|
|
|
|
*/
|
|
|
|
if (!chan) {
|
|
|
|
if (chanmode != CHAN_MODE_UNDEFINED && radar_detect)
|
|
|
|
radar_required = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR);
|
2013-01-08 13:04:07 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
|
|
case NL80211_IFTYPE_STATION:
|
2013-02-03 06:28:27 +00:00
|
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
2013-01-08 13:04:07 +00:00
|
|
|
case NL80211_IFTYPE_MONITOR:
|
|
|
|
break;
|
|
|
|
case NUM_NL80211_IFTYPES:
|
|
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (radar_required && !radar_detect)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-05-13 08:58:57 +00:00
|
|
|
/* Always allow software iftypes */
|
2013-01-08 13:04:07 +00:00
|
|
|
if (rdev->wiphy.software_iftypes & BIT(iftype)) {
|
|
|
|
if (radar_detect)
|
|
|
|
return -EINVAL;
|
2011-05-13 08:58:57 +00:00
|
|
|
return 0;
|
2013-01-08 13:04:07 +00:00
|
|
|
}
|
2011-05-13 08:58:57 +00:00
|
|
|
|
|
|
|
memset(num, 0, sizeof(num));
|
2012-06-29 10:47:07 +00:00
|
|
|
memset(used_channels, 0, sizeof(used_channels));
|
2011-05-13 08:58:57 +00:00
|
|
|
|
|
|
|
num[iftype] = 1;
|
|
|
|
|
2012-06-29 10:47:07 +00:00
|
|
|
switch (chanmode) {
|
|
|
|
case CHAN_MODE_UNDEFINED:
|
|
|
|
break;
|
|
|
|
case CHAN_MODE_SHARED:
|
|
|
|
WARN_ON(!chan);
|
|
|
|
used_channels[0] = chan;
|
|
|
|
num_different_channels++;
|
|
|
|
break;
|
|
|
|
case CHAN_MODE_EXCLUSIVE:
|
|
|
|
num_different_channels++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2012-06-15 12:33:17 +00:00
|
|
|
list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
|
2011-05-13 08:58:57 +00:00
|
|
|
if (wdev_iter == wdev)
|
|
|
|
continue;
|
2013-04-19 10:19:39 +00:00
|
|
|
if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
|
2012-06-15 22:19:54 +00:00
|
|
|
if (!wdev_iter->p2p_started)
|
|
|
|
continue;
|
2013-04-19 10:19:39 +00:00
|
|
|
} else if (wdev_iter->netdev) {
|
|
|
|
if (!netif_running(wdev_iter->netdev))
|
|
|
|
continue;
|
2012-06-15 22:19:54 +00:00
|
|
|
} else {
|
|
|
|
WARN_ON(1);
|
|
|
|
}
|
2011-05-13 08:58:57 +00:00
|
|
|
|
|
|
|
if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
|
|
|
|
continue;
|
|
|
|
|
2012-07-10 17:39:02 +00:00
|
|
|
/*
|
|
|
|
* We may be holding the "wdev" mutex, but now need to lock
|
|
|
|
* wdev_iter. This is OK because once we get here wdev_iter
|
|
|
|
* is not wdev (tested above), but we need to use the nested
|
|
|
|
* locking for lockdep.
|
|
|
|
*/
|
|
|
|
mutex_lock_nested(&wdev_iter->mtx, 1);
|
|
|
|
__acquire(wdev_iter->mtx);
|
|
|
|
cfg80211_get_chan_state(wdev_iter, &ch, &chmode);
|
|
|
|
wdev_unlock(wdev_iter);
|
2012-06-29 10:47:07 +00:00
|
|
|
|
|
|
|
switch (chmode) {
|
|
|
|
case CHAN_MODE_UNDEFINED:
|
|
|
|
break;
|
|
|
|
case CHAN_MODE_SHARED:
|
|
|
|
for (i = 0; i < CFG80211_MAX_NUM_DIFFERENT_CHANNELS; i++)
|
|
|
|
if (!used_channels[i] || used_channels[i] == ch)
|
|
|
|
break;
|
|
|
|
|
2012-06-29 10:47:08 +00:00
|
|
|
if (i == CFG80211_MAX_NUM_DIFFERENT_CHANNELS)
|
2012-06-29 10:47:07 +00:00
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (used_channels[i] == NULL) {
|
|
|
|
used_channels[i] = ch;
|
|
|
|
num_different_channels++;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case CHAN_MODE_EXCLUSIVE:
|
|
|
|
num_different_channels++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2011-05-13 08:58:57 +00:00
|
|
|
num[wdev_iter->iftype]++;
|
|
|
|
total++;
|
2012-06-05 10:16:50 +00:00
|
|
|
used_iftypes |= BIT(wdev_iter->iftype);
|
2011-05-13 08:58:57 +00:00
|
|
|
}
|
|
|
|
|
2013-01-08 13:04:07 +00:00
|
|
|
if (total == 1 && !radar_detect)
|
2012-03-15 09:16:16 +00:00
|
|
|
return 0;
|
|
|
|
|
2011-05-13 08:58:57 +00:00
|
|
|
for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
|
|
|
|
const struct ieee80211_iface_combination *c;
|
|
|
|
struct ieee80211_iface_limit *limits;
|
2012-06-05 10:16:50 +00:00
|
|
|
u32 all_iftypes = 0;
|
2011-05-13 08:58:57 +00:00
|
|
|
|
|
|
|
c = &rdev->wiphy.iface_combinations[i];
|
|
|
|
|
2012-06-29 10:47:07 +00:00
|
|
|
if (total > c->max_interfaces)
|
|
|
|
continue;
|
|
|
|
if (num_different_channels > c->num_different_channels)
|
|
|
|
continue;
|
|
|
|
|
2011-05-13 08:58:57 +00:00
|
|
|
limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!limits)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
|
|
|
|
if (rdev->wiphy.software_iftypes & BIT(iftype))
|
|
|
|
continue;
|
|
|
|
for (j = 0; j < c->n_limits; j++) {
|
2012-06-05 10:16:50 +00:00
|
|
|
all_iftypes |= limits[j].types;
|
2012-04-11 12:55:10 +00:00
|
|
|
if (!(limits[j].types & BIT(iftype)))
|
2011-05-13 08:58:57 +00:00
|
|
|
continue;
|
|
|
|
if (limits[j].max < num[iftype])
|
|
|
|
goto cont;
|
|
|
|
limits[j].max -= num[iftype];
|
|
|
|
}
|
|
|
|
}
|
2012-06-05 10:16:50 +00:00
|
|
|
|
2013-01-08 13:04:07 +00:00
|
|
|
if (radar_detect && !(c->radar_detect_widths & radar_detect))
|
|
|
|
goto cont;
|
|
|
|
|
2012-06-05 10:16:50 +00:00
|
|
|
/*
|
|
|
|
* Finally check that all iftypes that we're currently
|
|
|
|
* using are actually part of this combination. If they
|
|
|
|
* aren't then we can't use this combination and have
|
|
|
|
* to continue to the next.
|
|
|
|
*/
|
|
|
|
if ((all_iftypes & used_iftypes) != used_iftypes)
|
|
|
|
goto cont;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This combination covered all interface types and
|
|
|
|
* supported the requested numbers, so we're good.
|
|
|
|
*/
|
2011-05-13 08:58:57 +00:00
|
|
|
kfree(limits);
|
|
|
|
return 0;
|
|
|
|
cont:
|
|
|
|
kfree(limits);
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
2011-07-18 16:08:35 +00:00
|
|
|
|
|
|
|
int ieee80211_get_ratemask(struct ieee80211_supported_band *sband,
|
|
|
|
const u8 *rates, unsigned int n_rates,
|
|
|
|
u32 *mask)
|
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
|
2011-07-19 22:52:16 +00:00
|
|
|
if (!sband)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-07-18 16:08:35 +00:00
|
|
|
if (n_rates == 0 || n_rates > NL80211_MAX_SUPP_RATES)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
*mask = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < n_rates; i++) {
|
|
|
|
int rate = (rates[i] & 0x7f) * 5;
|
|
|
|
bool found = false;
|
|
|
|
|
|
|
|
for (j = 0; j < sband->n_bitrates; j++) {
|
|
|
|
if (sband->bitrates[j].bitrate == rate) {
|
|
|
|
found = true;
|
|
|
|
*mask |= BIT(j);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!found)
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mask must have at least one bit set here since we
|
|
|
|
* didn't accept a 0-length rates array nor allowed
|
|
|
|
* entries in the array that didn't exist
|
|
|
|
*/
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2011-11-21 10:09:22 +00:00
|
|
|
|
|
|
|
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
|
|
|
|
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
|
|
|
|
const unsigned char rfc1042_header[] __aligned(2) =
|
|
|
|
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
|
|
|
|
EXPORT_SYMBOL(rfc1042_header);
|
|
|
|
|
|
|
|
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
|
|
|
|
const unsigned char bridge_tunnel_header[] __aligned(2) =
|
|
|
|
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
|
|
|
|
EXPORT_SYMBOL(bridge_tunnel_header);
|