linux/net/netfilter/Makefile

188 lines
8.1 KiB
Makefile
Raw Normal View History

netfilter-objs := core.o nf_log.o nf_queue.o nf_sockopt.o
nf_conntrack-y := nf_conntrack_core.o nf_conntrack_standalone.o nf_conntrack_expect.o nf_conntrack_helper.o nf_conntrack_proto.o nf_conntrack_l3proto_generic.o nf_conntrack_proto_generic.o nf_conntrack_proto_tcp.o nf_conntrack_proto_udp.o nf_conntrack_extend.o nf_conntrack_acct.o nf_conntrack_seqadj.o
nf_conntrack-$(CONFIG_NF_CONNTRACK_TIMEOUT) += nf_conntrack_timeout.o
nf_conntrack-$(CONFIG_NF_CONNTRACK_TIMESTAMP) += nf_conntrack_timestamp.o
nf_conntrack-$(CONFIG_NF_CONNTRACK_EVENTS) += nf_conntrack_ecache.o
nf_conntrack-$(CONFIG_NF_CONNTRACK_LABELS) += nf_conntrack_labels.o
obj-$(CONFIG_NETFILTER) = netfilter.o
obj-$(CONFIG_NETFILTER_NETLINK) += nfnetlink.o
netfilter: add extended accounting infrastructure over nfnetlink We currently have two ways to account traffic in netfilter: - iptables chain and rule counters: # iptables -L -n -v Chain INPUT (policy DROP 3 packets, 867 bytes) pkts bytes target prot opt in out source destination 8 1104 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 - use flow-based accounting provided by ctnetlink: # conntrack -L tcp 6 431999 ESTABLISHED src=192.168.1.130 dst=212.106.219.168 sport=58152 dport=80 packets=47 bytes=7654 src=212.106.219.168 dst=192.168.1.130 sport=80 dport=58152 packets=49 bytes=66340 [ASSURED] mark=0 use=1 While trying to display real-time accounting statistics, we require to pool the kernel periodically to obtain this information. This is OK if the number of flows is relatively low. However, in case that the number of flows is huge, we can spend a considerable amount of cycles to iterate over the list of flows that have been obtained. Moreover, if we want to obtain the sum of the flow accounting results that match some criteria, we have to iterate over the whole list of existing flows, look for matchings and update the counters. This patch adds the extended accounting infrastructure for nfnetlink which aims to allow displaying real-time traffic accounting without the need of complicated and resource-consuming implementation in user-space. Basically, this new infrastructure allows you to create accounting objects. One accounting object is composed of packet and byte counters. In order to manipulate create accounting objects, you require the new libnetfilter_acct library. It contains several examples of use: libnetfilter_acct/examples# ./nfacct-add http-traffic libnetfilter_acct/examples# ./nfacct-get http-traffic = { pkts = 000000000000, bytes = 000000000000 }; Then, you can use one of this accounting objects in several iptables rules using the new nfacct match (which comes in a follow-up patch): # iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic # iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic The idea is simple: if one packet matches the rule, the nfacct match updates the counters. Thanks to Patrick McHardy, Eric Dumazet, Changli Gao for reviewing and providing feedback for this contribution. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-12-23 13:19:50 +00:00
obj-$(CONFIG_NETFILTER_NETLINK_ACCT) += nfnetlink_acct.o
obj-$(CONFIG_NETFILTER_NETLINK_QUEUE) += nfnetlink_queue.o
obj-$(CONFIG_NETFILTER_NETLINK_LOG) += nfnetlink_log.o
[NETFILTER]: Add nf_conntrack subsystem. The existing connection tracking subsystem in netfilter can only handle ipv4. There were basically two choices present to add connection tracking support for ipv6. We could either duplicate all of the ipv4 connection tracking code into an ipv6 counterpart, or (the choice taken by these patches) we could design a generic layer that could handle both ipv4 and ipv6 and thus requiring only one sub-protocol (TCP, UDP, etc.) connection tracking helper module to be written. In fact nf_conntrack is capable of working with any layer 3 protocol. The existing ipv4 specific conntrack code could also not deal with the pecularities of doing connection tracking on ipv6, which is also cured here. For example, these issues include: 1) ICMPv6 handling, which is used for neighbour discovery in ipv6 thus some messages such as these should not participate in connection tracking since effectively they are like ARP messages 2) fragmentation must be handled differently in ipv6, because the simplistic "defrag, connection track and NAT, refrag" (which the existing ipv4 connection tracking does) approach simply isn't feasible in ipv6 3) ipv6 extension header parsing must occur at the correct spots before and after connection tracking decisions, and there were no provisions for this in the existing connection tracking design 4) ipv6 has no need for stateful NAT The ipv4 specific conntrack layer is kept around, until all of the ipv4 specific conntrack helpers are ported over to nf_conntrack and it is feature complete. Once that occurs, the old conntrack stuff will get placed into the feature-removal-schedule and we will fully kill it off 6 months later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 00:38:16 +00:00
# connection tracking
[NETFILTER]: Add nf_conntrack subsystem. The existing connection tracking subsystem in netfilter can only handle ipv4. There were basically two choices present to add connection tracking support for ipv6. We could either duplicate all of the ipv4 connection tracking code into an ipv6 counterpart, or (the choice taken by these patches) we could design a generic layer that could handle both ipv4 and ipv6 and thus requiring only one sub-protocol (TCP, UDP, etc.) connection tracking helper module to be written. In fact nf_conntrack is capable of working with any layer 3 protocol. The existing ipv4 specific conntrack code could also not deal with the pecularities of doing connection tracking on ipv6, which is also cured here. For example, these issues include: 1) ICMPv6 handling, which is used for neighbour discovery in ipv6 thus some messages such as these should not participate in connection tracking since effectively they are like ARP messages 2) fragmentation must be handled differently in ipv6, because the simplistic "defrag, connection track and NAT, refrag" (which the existing ipv4 connection tracking does) approach simply isn't feasible in ipv6 3) ipv6 extension header parsing must occur at the correct spots before and after connection tracking decisions, and there were no provisions for this in the existing connection tracking design 4) ipv6 has no need for stateful NAT The ipv4 specific conntrack layer is kept around, until all of the ipv4 specific conntrack helpers are ported over to nf_conntrack and it is feature complete. Once that occurs, the old conntrack stuff will get placed into the feature-removal-schedule and we will fully kill it off 6 months later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 00:38:16 +00:00
obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
# SCTP protocol connection tracking
obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o
obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
[NETFILTER]: Add nf_conntrack subsystem. The existing connection tracking subsystem in netfilter can only handle ipv4. There were basically two choices present to add connection tracking support for ipv6. We could either duplicate all of the ipv4 connection tracking code into an ipv6 counterpart, or (the choice taken by these patches) we could design a generic layer that could handle both ipv4 and ipv6 and thus requiring only one sub-protocol (TCP, UDP, etc.) connection tracking helper module to be written. In fact nf_conntrack is capable of working with any layer 3 protocol. The existing ipv4 specific conntrack code could also not deal with the pecularities of doing connection tracking on ipv6, which is also cured here. For example, these issues include: 1) ICMPv6 handling, which is used for neighbour discovery in ipv6 thus some messages such as these should not participate in connection tracking since effectively they are like ARP messages 2) fragmentation must be handled differently in ipv6, because the simplistic "defrag, connection track and NAT, refrag" (which the existing ipv4 connection tracking does) approach simply isn't feasible in ipv6 3) ipv6 extension header parsing must occur at the correct spots before and after connection tracking decisions, and there were no provisions for this in the existing connection tracking design 4) ipv6 has no need for stateful NAT The ipv4 specific conntrack layer is kept around, until all of the ipv4 specific conntrack helpers are ported over to nf_conntrack and it is feature complete. Once that occurs, the old conntrack stuff will get placed into the feature-removal-schedule and we will fully kill it off 6 months later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 00:38:16 +00:00
obj-$(CONFIG_NF_CT_PROTO_SCTP) += nf_conntrack_proto_sctp.o
obj-$(CONFIG_NF_CT_PROTO_UDPLITE) += nf_conntrack_proto_udplite.o
# netlink interface for nf_conntrack
obj-$(CONFIG_NF_CT_NETLINK) += nf_conntrack_netlink.o
obj-$(CONFIG_NF_CT_NETLINK_TIMEOUT) += nfnetlink_cttimeout.o
obj-$(CONFIG_NF_CT_NETLINK_HELPER) += nfnetlink_cthelper.o
# connection tracking helpers
nf_conntrack_h323-objs := nf_conntrack_h323_main.o nf_conntrack_h323_asn1.o
obj-$(CONFIG_NF_CONNTRACK_AMANDA) += nf_conntrack_amanda.o
obj-$(CONFIG_NF_CONNTRACK_FTP) += nf_conntrack_ftp.o
obj-$(CONFIG_NF_CONNTRACK_H323) += nf_conntrack_h323.o
obj-$(CONFIG_NF_CONNTRACK_IRC) += nf_conntrack_irc.o
obj-$(CONFIG_NF_CONNTRACK_BROADCAST) += nf_conntrack_broadcast.o
obj-$(CONFIG_NF_CONNTRACK_NETBIOS_NS) += nf_conntrack_netbios_ns.o
obj-$(CONFIG_NF_CONNTRACK_SNMP) += nf_conntrack_snmp.o
obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_conntrack_pptp.o
obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
nf_nat-y := nf_nat_core.o nf_nat_proto_unknown.o nf_nat_proto_common.o \
nf_nat_proto_udp.o nf_nat_proto_tcp.o nf_nat_helper.o
# generic transport layer logging
obj-$(CONFIG_NF_LOG_COMMON) += nf_log_common.o
obj-$(CONFIG_NF_NAT) += nf_nat.o
obj-$(CONFIG_NF_NAT_REDIRECT) += nf_nat_redirect.o
# NAT protocols (nf_nat)
obj-$(CONFIG_NF_NAT_PROTO_DCCP) += nf_nat_proto_dccp.o
obj-$(CONFIG_NF_NAT_PROTO_UDPLITE) += nf_nat_proto_udplite.o
obj-$(CONFIG_NF_NAT_PROTO_SCTP) += nf_nat_proto_sctp.o
# NAT helpers
obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_amanda.o
obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
obj-$(CONFIG_NF_NAT_TFTP) += nf_nat_tftp.o
# SYNPROXY
obj-$(CONFIG_NETFILTER_SYNPROXY) += nf_synproxy_core.o
# generic packet duplication from netdev family
obj-$(CONFIG_NF_DUP_NETDEV) += nf_dup_netdev.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
# nf_tables
nf_tables-objs += nf_tables_core.o nf_tables_api.o nf_tables_trace.o
nf_tables-objs += nft_immediate.o nft_cmp.o nft_range.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
nf_tables-objs += nft_bitwise.o nft_byteorder.o nft_payload.o
nf_tables-objs += nft_lookup.o nft_dynset.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
obj-$(CONFIG_NF_TABLES) += nf_tables.o
obj-$(CONFIG_NF_TABLES_INET) += nf_tables_inet.o
obj-$(CONFIG_NF_TABLES_NETDEV) += nf_tables_netdev.o
netfilter: nf_tables: add compatibility layer for x_tables This patch adds the x_tables compatibility layer. This allows you to use existing x_tables matches and targets from nf_tables. This compatibility later allows us to use existing matches/targets for features that are still missing in nf_tables. We can progressively replace them with native nf_tables extensions. It also provides the userspace compatibility software that allows you to express the rule-set using the iptables syntax but using the nf_tables kernel components. In order to get this compatibility layer working, I've done the following things: * add NFNL_SUBSYS_NFT_COMPAT: this new nfnetlink subsystem is used to query the x_tables match/target revision, so we don't need to use the native x_table getsockopt interface. * emulate xt structures: this required extending the struct nft_pktinfo to include the fragment offset, which is already obtained from ip[6]_tables and that is used by some matches/targets. * add support for default policy to base chains, required to emulate x_tables. * add NFTA_CHAIN_USE attribute to obtain the number of references to chains, required by x_tables emulation. * add chain packet/byte counters using per-cpu. * support 32-64 bits compat. For historical reasons, this patch includes the following patches that were posted in the netfilter-devel mailing list. From Pablo Neira Ayuso: * nf_tables: add default policy to base chains * netfilter: nf_tables: add NFTA_CHAIN_USE attribute * nf_tables: nft_compat: private data of target and matches in contiguous area * nf_tables: validate hooks for compat match/target * nf_tables: nft_compat: release cached matches/targets * nf_tables: x_tables support as a compile time option * nf_tables: fix alias for xtables over nftables module * nf_tables: add packet and byte counters per chain * nf_tables: fix per-chain counter stats if no counters are passed * nf_tables: don't bump chain stats * nf_tables: add protocol and flags for xtables over nf_tables * nf_tables: add ip[6]t_entry emulation * nf_tables: move specific layer 3 compat code to nf_tables_ipv[4|6] * nf_tables: support 32bits-64bits x_tables compat * nf_tables: fix compilation if CONFIG_COMPAT is disabled From Patrick McHardy: * nf_tables: move policy to struct nft_base_chain * nf_tables: send notifications for base chain policy changes From Alexander Primak: * nf_tables: remove the duplicate NF_INET_LOCAL_OUT From Nicolas Dichtel: * nf_tables: fix compilation when nf-netlink is a module Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-13 22:06:06 +00:00
obj-$(CONFIG_NFT_COMPAT) += nft_compat.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
obj-$(CONFIG_NFT_EXTHDR) += nft_exthdr.o
obj-$(CONFIG_NFT_META) += nft_meta.o
obj-$(CONFIG_NFT_NUMGEN) += nft_numgen.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
obj-$(CONFIG_NFT_CT) += nft_ct.o
obj-$(CONFIG_NFT_LIMIT) += nft_limit.o
obj-$(CONFIG_NFT_NAT) += nft_nat.o
obj-$(CONFIG_NFT_QUEUE) += nft_queue.o
obj-$(CONFIG_NFT_QUOTA) += nft_quota.o
obj-$(CONFIG_NFT_REJECT) += nft_reject.o
obj-$(CONFIG_NFT_REJECT_INET) += nft_reject_inet.o
obj-$(CONFIG_NFT_SET_RBTREE) += nft_set_rbtree.o
obj-$(CONFIG_NFT_SET_HASH) += nft_set_hash.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
obj-$(CONFIG_NFT_COUNTER) += nft_counter.o
obj-$(CONFIG_NFT_LOG) += nft_log.o
obj-$(CONFIG_NFT_MASQ) += nft_masq.o
obj-$(CONFIG_NFT_REDIR) += nft_redir.o
obj-$(CONFIG_NFT_HASH) += nft_hash.o
netfilter: add nftables This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-14 09:00:02 +00:00
# nf_tables netdev
obj-$(CONFIG_NFT_DUP_NETDEV) += nft_dup_netdev.o
obj-$(CONFIG_NFT_FWD_NETDEV) += nft_fwd_netdev.o
# generic X tables
obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
# combos
obj-$(CONFIG_NETFILTER_XT_MARK) += xt_mark.o
obj-$(CONFIG_NETFILTER_XT_CONNMARK) += xt_connmark.o
obj-$(CONFIG_NETFILTER_XT_SET) += xt_set.o
obj-$(CONFIG_NETFILTER_XT_NAT) += xt_nat.o
# targets
obj-$(CONFIG_NETFILTER_XT_TARGET_AUDIT) += xt_AUDIT.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CHECKSUM) += xt_CHECKSUM.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
obj-$(CONFIG_NETFILTER_XT_TARGET_LOG) += xt_LOG.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NETMAP) += xt_NETMAP.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_RATEEST) += xt_RATEEST.o
obj-$(CONFIG_NETFILTER_XT_TARGET_REDIRECT) += xt_REDIRECT.o
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TPROXY) += xt_TPROXY.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP) += xt_TCPOPTSTRIP.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TEE) += xt_TEE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_IDLETIMER) += xt_IDLETIMER.o
# matches
obj-$(CONFIG_NETFILTER_XT_MATCH_ADDRTYPE) += xt_addrtype.o
obj-$(CONFIG_NETFILTER_XT_MATCH_BPF) += xt_bpf.o
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
obj-$(CONFIG_NETFILTER_XT_MATCH_CLUSTER) += xt_cluster.o
obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNBYTES) += xt_connbytes.o
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNLABEL) += xt_connlabel.o
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNLIMIT) += xt_connlimit.o
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNTRACK) += xt_conntrack.o
obj-$(CONFIG_NETFILTER_XT_MATCH_CPU) += xt_cpu.o
obj-$(CONFIG_NETFILTER_XT_MATCH_DCCP) += xt_dccp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_DEVGROUP) += xt_devgroup.o
obj-$(CONFIG_NETFILTER_XT_MATCH_DSCP) += xt_dscp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_ECN) += xt_ecn.o
obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += xt_esp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o
obj-$(CONFIG_NETFILTER_XT_MATCH_HL) += xt_hl.o
obj-$(CONFIG_NETFILTER_XT_MATCH_IPCOMP) += xt_ipcomp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_IPRANGE) += xt_iprange.o
obj-$(CONFIG_NETFILTER_XT_MATCH_IPVS) += xt_ipvs.o
obj-$(CONFIG_NETFILTER_XT_MATCH_L2TP) += xt_l2tp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o
obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
obj-$(CONFIG_NETFILTER_XT_MATCH_NFACCT) += xt_nfacct.o
obj-$(CONFIG_NETFILTER_XT_MATCH_OSF) += xt_osf.o
obj-$(CONFIG_NETFILTER_XT_MATCH_OWNER) += xt_owner.o
netfilter: x_tables: lightweight process control group matching It would be useful e.g. in a server or desktop environment to have a facility in the notion of fine-grained "per application" or "per application group" firewall policies. Probably, users in the mobile, embedded area (e.g. Android based) with different security policy requirements for application groups could have great benefit from that as well. For example, with a little bit of configuration effort, an admin could whitelist well-known applications, and thus block otherwise unwanted "hard-to-track" applications like [1] from a user's machine. Blocking is just one example, but it is not limited to that, meaning we can have much different scenarios/policies that netfilter allows us than just blocking, e.g. fine grained settings where applications are allowed to connect/send traffic to, application traffic marking/conntracking, application-specific packet mangling, and so on. Implementation of PID-based matching would not be appropriate as they frequently change, and child tracking would make that even more complex and ugly. Cgroups would be a perfect candidate for accomplishing that as they associate a set of tasks with a set of parameters for one or more subsystems, in our case the netfilter subsystem, which, of course, can be combined with other cgroup subsystems into something more complex if needed. As mentioned, to overcome this constraint, such processes could be placed into one or multiple cgroups where different fine-grained rules can be defined depending on the application scenario, while e.g. everything else that is not part of that could be dropped (or vice versa), thus making life harder for unwanted processes to communicate to the outside world. So, we make use of cgroups here to track jobs and limit their resources in terms of iptables policies; in other words, limiting, tracking, etc what they are allowed to communicate. In our case we're working on outgoing traffic based on which local socket that originated from. Also, one doesn't even need to have an a-prio knowledge of the application internals regarding their particular use of ports or protocols. Matching is *extremly* lightweight as we just test for the sk_classid marker of sockets, originating from net_cls. net_cls and netfilter do not contradict each other; in fact, each construct can live as standalone or they can be used in combination with each other, which is perfectly fine, plus it serves Tejun's requirement to not introduce a new cgroups subsystem. Through this, we result in a very minimal and efficient module, and don't add anything except netfilter code. One possible, minimal usage example (many other iptables options can be applied obviously): 1) Configuring cgroups if not already done, e.g.: mkdir /sys/fs/cgroup/net_cls mount -t cgroup -o net_cls net_cls /sys/fs/cgroup/net_cls mkdir /sys/fs/cgroup/net_cls/0 echo 1 > /sys/fs/cgroup/net_cls/0/net_cls.classid (resp. a real flow handle id for tc) 2) Configuring netfilter (iptables-nftables), e.g.: iptables -A OUTPUT -m cgroup ! --cgroup 1 -j DROP 3) Running applications, e.g.: ping 208.67.222.222 <pid:1799> echo 1799 > /sys/fs/cgroup/net_cls/0/tasks 64 bytes from 208.67.222.222: icmp_seq=44 ttl=49 time=11.9 ms [...] ping 208.67.220.220 <pid:1804> ping: sendmsg: Operation not permitted [...] echo 1804 > /sys/fs/cgroup/net_cls/0/tasks 64 bytes from 208.67.220.220: icmp_seq=89 ttl=56 time=19.0 ms [...] Of course, real-world deployments would make use of cgroups user space toolsuite, or own custom policy daemons dynamically moving applications from/to various cgroups. [1] http://www.blackhat.com/presentations/bh-europe-06/bh-eu-06-biondi/bh-eu-06-biondi-up.pdf Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-29 17:27:12 +00:00
obj-$(CONFIG_NETFILTER_XT_MATCH_CGROUP) += xt_cgroup.o
obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o
obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST) += xt_rateest.o
obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) += xt_recent.o
obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
netfilter: ipset: IP set core support The patch adds the IP set core support to the kernel. The IP set core implements a netlink (nfnetlink) based protocol by which one can create, destroy, flush, rename, swap, list, save, restore sets, and add, delete, test elements from userspace. For simplicity (and backward compatibilty and for not to force ip(6)tables to be linked with a netlink library) reasons a small getsockopt-based protocol is also kept in order to communicate with the ip(6)tables match and target. The netlink protocol passes all u16, etc values in network order with NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the NLA_F_NESTED and NLA_F_NET_BYTEORDER flags. For other kernel subsystems (netfilter match and target) the API contains the functions to add, delete and test elements in sets and the required calls to get/put refereces to the sets before those operations can be performed. The set types (which are implemented in independent modules) are stored in a simple RCU protected list. A set type may have variants: for example without timeout or with timeout support, for IPv4 or for IPv6. The sets (i.e. the pointers to the sets) are stored in an array. The sets are identified by their index in the array, which makes possible easy and fast swapping of sets. The array is protected indirectly by the nfnl mutex from nfnetlink. The content of the sets are protected by the rwlock of the set. There are functional differences between the add/del/test functions for the kernel and userspace: - kernel add/del/test: works on the current packet (i.e. one element) - kernel test: may trigger an "add" operation in order to fill out unspecified parts of the element from the packet (like MAC address) - userspace add/del: works on the netlink message and thus possibly on multiple elements from the IPSET_ATTR_ADT container attribute. - userspace add: may trigger resizing of a set Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-01 14:28:35 +00:00
# ipset
obj-$(CONFIG_IP_SET) += ipset/
# IPVS
obj-$(CONFIG_IP_VS) += ipvs/