net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
/*
|
|
|
|
|
* INET An implementation of the TCP/IP protocol suite for the LINUX
|
|
|
|
|
* operating system. INET is implemented using the BSD Socket
|
|
|
|
|
* interface as the means of communication with the user level.
|
|
|
|
|
*
|
|
|
|
|
* "Ping" sockets
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* Based on ipv4/udp.c code.
|
|
|
|
|
*
|
|
|
|
|
* Authors: Vasiliy Kulikov / Openwall (for Linux 2.6),
|
|
|
|
|
* Pavel Kankovsky (for Linux 2.4.32)
|
|
|
|
|
*
|
|
|
|
|
* Pavel gave all rights to bugs to Vasiliy,
|
|
|
|
|
* none of the bugs are Pavel's now.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/fcntl.h>
|
|
|
|
|
#include <linux/socket.h>
|
|
|
|
|
#include <linux/sockios.h>
|
|
|
|
|
#include <linux/in.h>
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
#include <linux/timer.h>
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
#include <linux/inet.h>
|
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
|
#include <net/snmp.h>
|
|
|
|
|
#include <net/ip.h>
|
|
|
|
|
#include <net/ipv6.h>
|
|
|
|
|
#include <net/icmp.h>
|
|
|
|
|
#include <net/protocol.h>
|
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
|
#include <linux/proc_fs.h>
|
2011-07-15 15:47:34 +00:00
|
|
|
#include <linux/export.h>
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
#include <net/sock.h>
|
|
|
|
|
#include <net/ping.h>
|
|
|
|
|
#include <net/udp.h>
|
|
|
|
|
#include <net/route.h>
|
|
|
|
|
#include <net/inet_common.h>
|
|
|
|
|
#include <net/checksum.h>
|
|
|
|
|
|
|
|
|
|
|
2011-05-13 22:59:19 +00:00
|
|
|
static struct ping_table ping_table;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
2011-05-13 22:59:19 +00:00
|
|
|
static u16 ping_port_rover;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
static inline int ping_hashfn(struct net *net, unsigned num, unsigned mask)
|
|
|
|
|
{
|
|
|
|
|
int res = (num + net_hash_mix(net)) & mask;
|
|
|
|
|
pr_debug("hash(%d) = %d\n", num, res);
|
|
|
|
|
return res;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline struct hlist_nulls_head *ping_hashslot(struct ping_table *table,
|
|
|
|
|
struct net *net, unsigned num)
|
|
|
|
|
{
|
|
|
|
|
return &table->hash[ping_hashfn(net, num, PING_HTABLE_MASK)];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ping_v4_get_port(struct sock *sk, unsigned short ident)
|
|
|
|
|
{
|
|
|
|
|
struct hlist_nulls_node *node;
|
|
|
|
|
struct hlist_nulls_head *hlist;
|
|
|
|
|
struct inet_sock *isk, *isk2;
|
|
|
|
|
struct sock *sk2 = NULL;
|
|
|
|
|
|
|
|
|
|
isk = inet_sk(sk);
|
|
|
|
|
write_lock_bh(&ping_table.lock);
|
|
|
|
|
if (ident == 0) {
|
|
|
|
|
u32 i;
|
|
|
|
|
u16 result = ping_port_rover + 1;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < (1L << 16); i++, result++) {
|
|
|
|
|
if (!result)
|
|
|
|
|
result++; /* avoid zero */
|
|
|
|
|
hlist = ping_hashslot(&ping_table, sock_net(sk),
|
|
|
|
|
result);
|
|
|
|
|
ping_portaddr_for_each_entry(sk2, node, hlist) {
|
|
|
|
|
isk2 = inet_sk(sk2);
|
|
|
|
|
|
|
|
|
|
if (isk2->inet_num == result)
|
|
|
|
|
goto next_port;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* found */
|
|
|
|
|
ping_port_rover = ident = result;
|
|
|
|
|
break;
|
|
|
|
|
next_port:
|
|
|
|
|
;
|
|
|
|
|
}
|
|
|
|
|
if (i >= (1L << 16))
|
|
|
|
|
goto fail;
|
|
|
|
|
} else {
|
|
|
|
|
hlist = ping_hashslot(&ping_table, sock_net(sk), ident);
|
|
|
|
|
ping_portaddr_for_each_entry(sk2, node, hlist) {
|
|
|
|
|
isk2 = inet_sk(sk2);
|
|
|
|
|
|
|
|
|
|
if ((isk2->inet_num == ident) &&
|
|
|
|
|
(sk2 != sk) &&
|
|
|
|
|
(!sk2->sk_reuse || !sk->sk_reuse))
|
|
|
|
|
goto fail;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pr_debug("found port/ident = %d\n", ident);
|
|
|
|
|
isk->inet_num = ident;
|
|
|
|
|
if (sk_unhashed(sk)) {
|
|
|
|
|
pr_debug("was not hashed\n");
|
|
|
|
|
sock_hold(sk);
|
|
|
|
|
hlist_nulls_add_head(&sk->sk_nulls_node, hlist);
|
|
|
|
|
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
|
|
|
|
|
}
|
|
|
|
|
write_unlock_bh(&ping_table.lock);
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
fail:
|
|
|
|
|
write_unlock_bh(&ping_table.lock);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_v4_hash(struct sock *sk)
|
|
|
|
|
{
|
|
|
|
|
pr_debug("ping_v4_hash(sk->port=%u)\n", inet_sk(sk)->inet_num);
|
|
|
|
|
BUG(); /* "Please do not press this button again." */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_v4_unhash(struct sock *sk)
|
|
|
|
|
{
|
|
|
|
|
struct inet_sock *isk = inet_sk(sk);
|
|
|
|
|
pr_debug("ping_v4_unhash(isk=%p,isk->num=%u)\n", isk, isk->inet_num);
|
|
|
|
|
if (sk_hashed(sk)) {
|
|
|
|
|
write_lock_bh(&ping_table.lock);
|
|
|
|
|
hlist_nulls_del(&sk->sk_nulls_node);
|
|
|
|
|
sock_put(sk);
|
2012-01-16 19:27:39 +00:00
|
|
|
isk->inet_num = 0;
|
|
|
|
|
isk->inet_sport = 0;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
|
|
|
|
|
write_unlock_bh(&ping_table.lock);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2012-01-16 19:27:39 +00:00
|
|
|
static struct sock *ping_v4_lookup(struct net *net, __be32 saddr, __be32 daddr,
|
2011-05-13 22:59:19 +00:00
|
|
|
u16 ident, int dif)
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
{
|
|
|
|
|
struct hlist_nulls_head *hslot = ping_hashslot(&ping_table, net, ident);
|
|
|
|
|
struct sock *sk = NULL;
|
|
|
|
|
struct inet_sock *isk;
|
|
|
|
|
struct hlist_nulls_node *hnode;
|
|
|
|
|
|
2012-01-16 19:27:39 +00:00
|
|
|
pr_debug("try to find: num = %d, daddr = %pI4, dif = %d\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
(int)ident, &daddr, dif);
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
read_lock_bh(&ping_table.lock);
|
|
|
|
|
|
|
|
|
|
ping_portaddr_for_each_entry(sk, hnode, hslot) {
|
|
|
|
|
isk = inet_sk(sk);
|
|
|
|
|
|
2012-01-16 19:27:39 +00:00
|
|
|
pr_debug("found: %p: num = %d, daddr = %pI4, dif = %d\n", sk,
|
|
|
|
|
(int)isk->inet_num, &isk->inet_rcv_saddr,
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
sk->sk_bound_dev_if);
|
|
|
|
|
|
|
|
|
|
pr_debug("iterate\n");
|
|
|
|
|
if (isk->inet_num != ident)
|
|
|
|
|
continue;
|
|
|
|
|
if (isk->inet_rcv_saddr && isk->inet_rcv_saddr != daddr)
|
|
|
|
|
continue;
|
|
|
|
|
if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
sock_hold(sk);
|
|
|
|
|
goto exit;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sk = NULL;
|
|
|
|
|
exit:
|
|
|
|
|
read_unlock_bh(&ping_table.lock);
|
|
|
|
|
|
|
|
|
|
return sk;
|
|
|
|
|
}
|
|
|
|
|
|
2011-05-18 21:16:01 +00:00
|
|
|
static void inet_get_ping_group_range_net(struct net *net, gid_t *low,
|
|
|
|
|
gid_t *high)
|
2011-05-17 00:16:56 +00:00
|
|
|
{
|
|
|
|
|
gid_t *data = net->ipv4.sysctl_ping_group_range;
|
|
|
|
|
unsigned seq;
|
|
|
|
|
do {
|
|
|
|
|
seq = read_seqbegin(&sysctl_local_ports.lock);
|
|
|
|
|
|
|
|
|
|
*low = data[0];
|
|
|
|
|
*high = data[1];
|
|
|
|
|
} while (read_seqretry(&sysctl_local_ports.lock, seq));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
static int ping_init_sock(struct sock *sk)
|
|
|
|
|
{
|
|
|
|
|
struct net *net = sock_net(sk);
|
|
|
|
|
gid_t group = current_egid();
|
|
|
|
|
gid_t range[2];
|
|
|
|
|
struct group_info *group_info = get_current_groups();
|
|
|
|
|
int i, j, count = group_info->ngroups;
|
|
|
|
|
|
|
|
|
|
inet_get_ping_group_range_net(net, range, range+1);
|
|
|
|
|
if (range[0] <= group && group <= range[1])
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < group_info->nblocks; i++) {
|
|
|
|
|
int cp_count = min_t(int, NGROUPS_PER_BLOCK, count);
|
|
|
|
|
|
|
|
|
|
for (j = 0; j < cp_count; j++) {
|
|
|
|
|
group = group_info->blocks[i][j];
|
|
|
|
|
if (range[0] <= group && group <= range[1])
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
count -= cp_count;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return -EACCES;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_close(struct sock *sk, long timeout)
|
|
|
|
|
{
|
|
|
|
|
pr_debug("ping_close(sk=%p,sk->num=%u)\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
inet_sk(sk), inet_sk(sk)->inet_num);
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
pr_debug("isk->refcnt = %d\n", sk->sk_refcnt.counter);
|
|
|
|
|
|
|
|
|
|
sk_common_release(sk);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We need our own bind because there are no privileged id's == local ports.
|
|
|
|
|
* Moreover, we don't allow binding to multi- and broadcast addresses.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static int ping_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
|
|
|
|
|
{
|
|
|
|
|
struct sockaddr_in *addr = (struct sockaddr_in *)uaddr;
|
|
|
|
|
struct inet_sock *isk = inet_sk(sk);
|
|
|
|
|
unsigned short snum;
|
|
|
|
|
int chk_addr_ret;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
if (addr_len < sizeof(struct sockaddr_in))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
pr_debug("ping_v4_bind(sk=%p,sa_addr=%08x,sa_port=%d)\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
sk, addr->sin_addr.s_addr, ntohs(addr->sin_port));
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
|
2012-01-16 19:27:39 +00:00
|
|
|
if (addr->sin_addr.s_addr == htonl(INADDR_ANY))
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
chk_addr_ret = RTN_LOCAL;
|
|
|
|
|
|
|
|
|
|
if ((sysctl_ip_nonlocal_bind == 0 &&
|
|
|
|
|
isk->freebind == 0 && isk->transparent == 0 &&
|
|
|
|
|
chk_addr_ret != RTN_LOCAL) ||
|
|
|
|
|
chk_addr_ret == RTN_MULTICAST ||
|
|
|
|
|
chk_addr_ret == RTN_BROADCAST)
|
|
|
|
|
return -EADDRNOTAVAIL;
|
|
|
|
|
|
|
|
|
|
lock_sock(sk);
|
|
|
|
|
|
|
|
|
|
err = -EINVAL;
|
|
|
|
|
if (isk->inet_num != 0)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
err = -EADDRINUSE;
|
|
|
|
|
isk->inet_rcv_saddr = isk->inet_saddr = addr->sin_addr.s_addr;
|
|
|
|
|
snum = ntohs(addr->sin_port);
|
|
|
|
|
if (ping_v4_get_port(sk, snum) != 0) {
|
|
|
|
|
isk->inet_saddr = isk->inet_rcv_saddr = 0;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
2012-01-16 19:27:39 +00:00
|
|
|
pr_debug("after bind(): num = %d, daddr = %pI4, dif = %d\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
(int)isk->inet_num,
|
|
|
|
|
&isk->inet_rcv_saddr,
|
|
|
|
|
(int)sk->sk_bound_dev_if);
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
|
if (isk->inet_rcv_saddr)
|
|
|
|
|
sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
|
|
|
|
|
if (snum)
|
|
|
|
|
sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
|
|
|
|
|
isk->inet_sport = htons(isk->inet_num);
|
|
|
|
|
isk->inet_daddr = 0;
|
|
|
|
|
isk->inet_dport = 0;
|
|
|
|
|
sk_dst_reset(sk);
|
|
|
|
|
out:
|
|
|
|
|
release_sock(sk);
|
|
|
|
|
pr_debug("ping_v4_bind -> %d\n", err);
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Is this a supported type of ICMP message?
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static inline int ping_supported(int type, int code)
|
|
|
|
|
{
|
|
|
|
|
if (type == ICMP_ECHO && code == 0)
|
|
|
|
|
return 1;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This routine is called by the ICMP module when it gets some
|
|
|
|
|
* sort of error condition.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
|
|
|
|
|
|
|
|
|
|
void ping_err(struct sk_buff *skb, u32 info)
|
|
|
|
|
{
|
|
|
|
|
struct iphdr *iph = (struct iphdr *)skb->data;
|
|
|
|
|
struct icmphdr *icmph = (struct icmphdr *)(skb->data+(iph->ihl<<2));
|
|
|
|
|
struct inet_sock *inet_sock;
|
|
|
|
|
int type = icmph->type;
|
|
|
|
|
int code = icmph->code;
|
|
|
|
|
struct net *net = dev_net(skb->dev);
|
|
|
|
|
struct sock *sk;
|
|
|
|
|
int harderr;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
/* We assume the packet has already been checked by icmp_unreach */
|
|
|
|
|
|
|
|
|
|
if (!ping_supported(icmph->type, icmph->code))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
pr_debug("ping_err(type=%04x,code=%04x,id=%04x,seq=%04x)\n", type,
|
2012-03-11 18:36:11 +00:00
|
|
|
code, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
|
|
|
|
|
ntohs(icmph->un.echo.id), skb->dev->ifindex);
|
|
|
|
|
if (sk == NULL) {
|
|
|
|
|
pr_debug("no socket, dropping\n");
|
|
|
|
|
return; /* No socket for error */
|
|
|
|
|
}
|
|
|
|
|
pr_debug("err on socket %p\n", sk);
|
|
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
|
harderr = 0;
|
|
|
|
|
inet_sock = inet_sk(sk);
|
|
|
|
|
|
|
|
|
|
switch (type) {
|
|
|
|
|
default:
|
|
|
|
|
case ICMP_TIME_EXCEEDED:
|
|
|
|
|
err = EHOSTUNREACH;
|
|
|
|
|
break;
|
|
|
|
|
case ICMP_SOURCE_QUENCH:
|
|
|
|
|
/* This is not a real error but ping wants to see it.
|
|
|
|
|
* Report it with some fake errno. */
|
|
|
|
|
err = EREMOTEIO;
|
|
|
|
|
break;
|
|
|
|
|
case ICMP_PARAMETERPROB:
|
|
|
|
|
err = EPROTO;
|
|
|
|
|
harderr = 1;
|
|
|
|
|
break;
|
|
|
|
|
case ICMP_DEST_UNREACH:
|
|
|
|
|
if (code == ICMP_FRAG_NEEDED) { /* Path MTU discovery */
|
|
|
|
|
if (inet_sock->pmtudisc != IP_PMTUDISC_DONT) {
|
|
|
|
|
err = EMSGSIZE;
|
|
|
|
|
harderr = 1;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
err = EHOSTUNREACH;
|
|
|
|
|
if (code <= NR_ICMP_UNREACH) {
|
|
|
|
|
harderr = icmp_err_convert[code].fatal;
|
|
|
|
|
err = icmp_err_convert[code].errno;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case ICMP_REDIRECT:
|
|
|
|
|
/* See ICMP_SOURCE_QUENCH */
|
|
|
|
|
err = EREMOTEIO;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* RFC1122: OK. Passes ICMP errors back to application, as per
|
|
|
|
|
* 4.1.3.3.
|
|
|
|
|
*/
|
|
|
|
|
if (!inet_sock->recverr) {
|
|
|
|
|
if (!harderr || sk->sk_state != TCP_ESTABLISHED)
|
|
|
|
|
goto out;
|
|
|
|
|
} else {
|
|
|
|
|
ip_icmp_error(sk, skb, err, 0 /* no remote port */,
|
|
|
|
|
info, (u8 *)icmph);
|
|
|
|
|
}
|
|
|
|
|
sk->sk_err = err;
|
|
|
|
|
sk->sk_error_report(sk);
|
|
|
|
|
out:
|
|
|
|
|
sock_put(sk);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Copy and checksum an ICMP Echo packet from user space into a buffer.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
struct pingfakehdr {
|
|
|
|
|
struct icmphdr icmph;
|
|
|
|
|
struct iovec *iov;
|
2012-01-16 19:27:39 +00:00
|
|
|
__wsum wcheck;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ping_getfrag(void *from, char * to,
|
|
|
|
|
int offset, int fraglen, int odd, struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
struct pingfakehdr *pfh = (struct pingfakehdr *)from;
|
|
|
|
|
|
|
|
|
|
if (offset == 0) {
|
|
|
|
|
if (fraglen < sizeof(struct icmphdr))
|
|
|
|
|
BUG();
|
|
|
|
|
if (csum_partial_copy_fromiovecend(to + sizeof(struct icmphdr),
|
|
|
|
|
pfh->iov, 0, fraglen - sizeof(struct icmphdr),
|
|
|
|
|
&pfh->wcheck))
|
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
if (offset < sizeof(struct icmphdr))
|
|
|
|
|
BUG();
|
|
|
|
|
if (csum_partial_copy_fromiovecend
|
|
|
|
|
(to, pfh->iov, offset - sizeof(struct icmphdr),
|
|
|
|
|
fraglen, &pfh->wcheck))
|
|
|
|
|
return -EFAULT;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2011-05-18 21:16:01 +00:00
|
|
|
static int ping_push_pending_frames(struct sock *sk, struct pingfakehdr *pfh,
|
|
|
|
|
struct flowi4 *fl4)
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
{
|
|
|
|
|
struct sk_buff *skb = skb_peek(&sk->sk_write_queue);
|
|
|
|
|
|
|
|
|
|
pfh->wcheck = csum_partial((char *)&pfh->icmph,
|
|
|
|
|
sizeof(struct icmphdr), pfh->wcheck);
|
|
|
|
|
pfh->icmph.checksum = csum_fold(pfh->wcheck);
|
|
|
|
|
memcpy(icmp_hdr(skb), &pfh->icmph, sizeof(struct icmphdr));
|
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
|
return ip_push_pending_frames(sk, fl4);
|
|
|
|
|
}
|
|
|
|
|
|
2011-05-18 21:16:00 +00:00
|
|
|
static int ping_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
|
|
|
|
|
size_t len)
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
{
|
|
|
|
|
struct net *net = sock_net(sk);
|
|
|
|
|
struct flowi4 fl4;
|
|
|
|
|
struct inet_sock *inet = inet_sk(sk);
|
|
|
|
|
struct ipcm_cookie ipc;
|
|
|
|
|
struct icmphdr user_icmph;
|
|
|
|
|
struct pingfakehdr pfh;
|
|
|
|
|
struct rtable *rt = NULL;
|
|
|
|
|
struct ip_options_data opt_copy;
|
|
|
|
|
int free = 0;
|
2012-01-16 19:27:39 +00:00
|
|
|
__be32 saddr, daddr, faddr;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
u8 tos;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
pr_debug("ping_sendmsg(sk=%p,sk->num=%u)\n", inet, inet->inet_num);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (len > 0xFFFF)
|
|
|
|
|
return -EMSGSIZE;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Check the flags.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Mirror BSD error message compatibility */
|
|
|
|
|
if (msg->msg_flags & MSG_OOB)
|
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Fetch the ICMP header provided by the userland.
|
|
|
|
|
* iovec is modified!
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (memcpy_fromiovec((u8 *)&user_icmph, msg->msg_iov,
|
|
|
|
|
sizeof(struct icmphdr)))
|
|
|
|
|
return -EFAULT;
|
|
|
|
|
if (!ping_supported(user_icmph.type, user_icmph.code))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Get and verify the address.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (msg->msg_name) {
|
|
|
|
|
struct sockaddr_in *usin = (struct sockaddr_in *)msg->msg_name;
|
|
|
|
|
if (msg->msg_namelen < sizeof(*usin))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
if (usin->sin_family != AF_INET)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
daddr = usin->sin_addr.s_addr;
|
|
|
|
|
/* no remote port */
|
|
|
|
|
} else {
|
|
|
|
|
if (sk->sk_state != TCP_ESTABLISHED)
|
|
|
|
|
return -EDESTADDRREQ;
|
|
|
|
|
daddr = inet->inet_daddr;
|
|
|
|
|
/* no remote port */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ipc.addr = inet->inet_saddr;
|
|
|
|
|
ipc.opt = NULL;
|
|
|
|
|
ipc.oif = sk->sk_bound_dev_if;
|
|
|
|
|
ipc.tx_flags = 0;
|
|
|
|
|
err = sock_tx_timestamp(sk, &ipc.tx_flags);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
if (msg->msg_controllen) {
|
|
|
|
|
err = ip_cmsg_send(sock_net(sk), msg, &ipc);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
if (ipc.opt)
|
|
|
|
|
free = 1;
|
|
|
|
|
}
|
|
|
|
|
if (!ipc.opt) {
|
|
|
|
|
struct ip_options_rcu *inet_opt;
|
|
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
|
inet_opt = rcu_dereference(inet->inet_opt);
|
|
|
|
|
if (inet_opt) {
|
|
|
|
|
memcpy(&opt_copy, inet_opt,
|
|
|
|
|
sizeof(*inet_opt) + inet_opt->opt.optlen);
|
|
|
|
|
ipc.opt = &opt_copy.opt;
|
|
|
|
|
}
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
saddr = ipc.addr;
|
|
|
|
|
ipc.addr = faddr = daddr;
|
|
|
|
|
|
|
|
|
|
if (ipc.opt && ipc.opt->opt.srr) {
|
|
|
|
|
if (!daddr)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
faddr = ipc.opt->opt.faddr;
|
|
|
|
|
}
|
|
|
|
|
tos = RT_TOS(inet->tos);
|
|
|
|
|
if (sock_flag(sk, SOCK_LOCALROUTE) ||
|
|
|
|
|
(msg->msg_flags & MSG_DONTROUTE) ||
|
|
|
|
|
(ipc.opt && ipc.opt->opt.is_strictroute)) {
|
|
|
|
|
tos |= RTO_ONLINK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (ipv4_is_multicast(daddr)) {
|
|
|
|
|
if (!ipc.oif)
|
|
|
|
|
ipc.oif = inet->mc_index;
|
|
|
|
|
if (!saddr)
|
|
|
|
|
saddr = inet->mc_addr;
|
2012-02-08 09:11:07 +00:00
|
|
|
} else if (!ipc.oif)
|
|
|
|
|
ipc.oif = inet->uc_index;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
|
|
|
|
|
RT_SCOPE_UNIVERSE, sk->sk_protocol,
|
|
|
|
|
inet_sk_flowi_flags(sk), faddr, saddr, 0, 0);
|
|
|
|
|
|
|
|
|
|
security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
|
|
|
|
|
rt = ip_route_output_flow(net, &fl4, sk);
|
|
|
|
|
if (IS_ERR(rt)) {
|
|
|
|
|
err = PTR_ERR(rt);
|
|
|
|
|
rt = NULL;
|
|
|
|
|
if (err == -ENETUNREACH)
|
|
|
|
|
IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
err = -EACCES;
|
|
|
|
|
if ((rt->rt_flags & RTCF_BROADCAST) &&
|
|
|
|
|
!sock_flag(sk, SOCK_BROADCAST))
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
if (msg->msg_flags & MSG_CONFIRM)
|
|
|
|
|
goto do_confirm;
|
|
|
|
|
back_from_confirm:
|
|
|
|
|
|
|
|
|
|
if (!ipc.addr)
|
|
|
|
|
ipc.addr = fl4.daddr;
|
|
|
|
|
|
|
|
|
|
lock_sock(sk);
|
|
|
|
|
|
|
|
|
|
pfh.icmph.type = user_icmph.type; /* already checked */
|
|
|
|
|
pfh.icmph.code = user_icmph.code; /* ditto */
|
|
|
|
|
pfh.icmph.checksum = 0;
|
|
|
|
|
pfh.icmph.un.echo.id = inet->inet_sport;
|
|
|
|
|
pfh.icmph.un.echo.sequence = user_icmph.un.echo.sequence;
|
|
|
|
|
pfh.iov = msg->msg_iov;
|
|
|
|
|
pfh.wcheck = 0;
|
|
|
|
|
|
|
|
|
|
err = ip_append_data(sk, &fl4, ping_getfrag, &pfh, len,
|
|
|
|
|
0, &ipc, &rt, msg->msg_flags);
|
|
|
|
|
if (err)
|
|
|
|
|
ip_flush_pending_frames(sk);
|
|
|
|
|
else
|
|
|
|
|
err = ping_push_pending_frames(sk, &pfh, &fl4);
|
|
|
|
|
release_sock(sk);
|
|
|
|
|
|
|
|
|
|
out:
|
|
|
|
|
ip_rt_put(rt);
|
|
|
|
|
if (free)
|
|
|
|
|
kfree(ipc.opt);
|
|
|
|
|
if (!err) {
|
|
|
|
|
icmp_out_count(sock_net(sk), user_icmph.type);
|
|
|
|
|
return len;
|
|
|
|
|
}
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
do_confirm:
|
|
|
|
|
dst_confirm(&rt->dst);
|
|
|
|
|
if (!(msg->msg_flags & MSG_PROBE) || len)
|
|
|
|
|
goto back_from_confirm;
|
|
|
|
|
err = 0;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
2011-05-18 21:16:00 +00:00
|
|
|
static int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
|
|
|
|
|
size_t len, int noblock, int flags, int *addr_len)
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
{
|
|
|
|
|
struct inet_sock *isk = inet_sk(sk);
|
|
|
|
|
struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
|
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
int copied, err;
|
|
|
|
|
|
|
|
|
|
pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
|
|
|
|
|
|
2012-02-21 22:59:19 +00:00
|
|
|
err = -EOPNOTSUPP;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
if (flags & MSG_OOB)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
if (addr_len)
|
|
|
|
|
*addr_len = sizeof(*sin);
|
|
|
|
|
|
|
|
|
|
if (flags & MSG_ERRQUEUE)
|
|
|
|
|
return ip_recv_error(sk, msg, len);
|
|
|
|
|
|
|
|
|
|
skb = skb_recv_datagram(sk, flags, noblock, &err);
|
|
|
|
|
if (!skb)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
copied = skb->len;
|
|
|
|
|
if (copied > len) {
|
|
|
|
|
msg->msg_flags |= MSG_TRUNC;
|
|
|
|
|
copied = len;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Don't bother checking the checksum */
|
|
|
|
|
err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
|
|
|
|
|
if (err)
|
|
|
|
|
goto done;
|
|
|
|
|
|
|
|
|
|
sock_recv_timestamp(msg, sk, skb);
|
|
|
|
|
|
|
|
|
|
/* Copy the address. */
|
|
|
|
|
if (sin) {
|
|
|
|
|
sin->sin_family = AF_INET;
|
|
|
|
|
sin->sin_port = 0 /* skb->h.uh->source */;
|
|
|
|
|
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
|
|
|
|
|
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
|
|
|
|
|
}
|
|
|
|
|
if (isk->cmsg_flags)
|
|
|
|
|
ip_cmsg_recv(msg, skb);
|
|
|
|
|
err = copied;
|
|
|
|
|
|
|
|
|
|
done:
|
|
|
|
|
skb_free_datagram(sk, skb);
|
|
|
|
|
out:
|
|
|
|
|
pr_debug("ping_recvmsg -> %d\n", err);
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
inet_sk(sk), inet_sk(sk)->inet_num, skb);
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
if (sock_queue_rcv_skb(sk, skb) < 0) {
|
|
|
|
|
kfree_skb(skb);
|
|
|
|
|
pr_debug("ping_queue_rcv_skb -> failed\n");
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* All we need to do is get the socket.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
void ping_rcv(struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
struct sock *sk;
|
|
|
|
|
struct net *net = dev_net(skb->dev);
|
|
|
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
|
struct icmphdr *icmph = icmp_hdr(skb);
|
2012-01-16 19:27:39 +00:00
|
|
|
__be32 saddr = iph->saddr;
|
|
|
|
|
__be32 daddr = iph->daddr;
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
/* We assume the packet has already been checked by icmp_rcv */
|
|
|
|
|
|
|
|
|
|
pr_debug("ping_rcv(skb=%p,id=%04x,seq=%04x)\n",
|
2012-03-11 18:36:11 +00:00
|
|
|
skb, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
/* Push ICMP header back */
|
|
|
|
|
skb_push(skb, skb->data - (u8 *)icmph);
|
|
|
|
|
|
|
|
|
|
sk = ping_v4_lookup(net, saddr, daddr, ntohs(icmph->un.echo.id),
|
|
|
|
|
skb->dev->ifindex);
|
|
|
|
|
if (sk != NULL) {
|
|
|
|
|
pr_debug("rcv on socket %p\n", sk);
|
|
|
|
|
ping_queue_rcv_skb(sk, skb_get(skb));
|
|
|
|
|
sock_put(sk);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
pr_debug("no socket, dropping\n");
|
|
|
|
|
|
|
|
|
|
/* We're called from icmp_rcv(). kfree_skb() is done there. */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
struct proto ping_prot = {
|
|
|
|
|
.name = "PING",
|
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
|
.init = ping_init_sock,
|
|
|
|
|
.close = ping_close,
|
|
|
|
|
.connect = ip4_datagram_connect,
|
|
|
|
|
.disconnect = udp_disconnect,
|
|
|
|
|
.setsockopt = ip_setsockopt,
|
|
|
|
|
.getsockopt = ip_getsockopt,
|
|
|
|
|
.sendmsg = ping_sendmsg,
|
|
|
|
|
.recvmsg = ping_recvmsg,
|
|
|
|
|
.bind = ping_bind,
|
|
|
|
|
.backlog_rcv = ping_queue_rcv_skb,
|
|
|
|
|
.hash = ping_v4_hash,
|
|
|
|
|
.unhash = ping_v4_unhash,
|
|
|
|
|
.get_port = ping_v4_get_port,
|
|
|
|
|
.obj_size = sizeof(struct inet_sock),
|
|
|
|
|
};
|
|
|
|
|
EXPORT_SYMBOL(ping_prot);
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
|
|
|
|
|
|
|
static struct sock *ping_get_first(struct seq_file *seq, int start)
|
|
|
|
|
{
|
|
|
|
|
struct sock *sk;
|
|
|
|
|
struct ping_iter_state *state = seq->private;
|
|
|
|
|
struct net *net = seq_file_net(seq);
|
|
|
|
|
|
|
|
|
|
for (state->bucket = start; state->bucket < PING_HTABLE_SIZE;
|
|
|
|
|
++state->bucket) {
|
|
|
|
|
struct hlist_nulls_node *node;
|
2011-05-18 21:16:01 +00:00
|
|
|
struct hlist_nulls_head *hslot;
|
|
|
|
|
|
|
|
|
|
hslot = &ping_table.hash[state->bucket];
|
net: ipv4: add IPPROTO_ICMP socket kind
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges. In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).
Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/
A new ping socket is created with
socket(PF_INET, SOCK_DGRAM, PROT_ICMP)
Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.
Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.
ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.
ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).
socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets. Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.
The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).
Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping
For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/
Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.
All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.
PATCH v3:
- switched to flowi4.
- minor changes to be consistent with raw sockets code.
PATCH v2:
- changed ping_debug() to pr_debug().
- removed CONFIG_IP_PING.
- removed ping_seq_fops.owner field (unused for procfs).
- switched to proc_net_fops_create().
- switched to %pK in seq_printf().
PATCH v1:
- fixed checksumming bug.
- CAP_NET_RAW may not create icmp sockets anymore.
RFC v2:
- minor cleanups.
- introduced sysctl'able group range to restrict socket(2).
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 10:01:00 +00:00
|
|
|
|
|
|
|
|
if (hlist_nulls_empty(hslot))
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
sk_nulls_for_each(sk, node, hslot) {
|
|
|
|
|
if (net_eq(sock_net(sk), net))
|
|
|
|
|
goto found;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
sk = NULL;
|
|
|
|
|
found:
|
|
|
|
|
return sk;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct sock *ping_get_next(struct seq_file *seq, struct sock *sk)
|
|
|
|
|
{
|
|
|
|
|
struct ping_iter_state *state = seq->private;
|
|
|
|
|
struct net *net = seq_file_net(seq);
|
|
|
|
|
|
|
|
|
|
do {
|
|
|
|
|
sk = sk_nulls_next(sk);
|
|
|
|
|
} while (sk && (!net_eq(sock_net(sk), net)));
|
|
|
|
|
|
|
|
|
|
if (!sk)
|
|
|
|
|
return ping_get_first(seq, state->bucket + 1);
|
|
|
|
|
return sk;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct sock *ping_get_idx(struct seq_file *seq, loff_t pos)
|
|
|
|
|
{
|
|
|
|
|
struct sock *sk = ping_get_first(seq, 0);
|
|
|
|
|
|
|
|
|
|
if (sk)
|
|
|
|
|
while (pos && (sk = ping_get_next(seq, sk)) != NULL)
|
|
|
|
|
--pos;
|
|
|
|
|
return pos ? NULL : sk;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void *ping_seq_start(struct seq_file *seq, loff_t *pos)
|
|
|
|
|
{
|
|
|
|
|
struct ping_iter_state *state = seq->private;
|
|
|
|
|
state->bucket = 0;
|
|
|
|
|
|
|
|
|
|
read_lock_bh(&ping_table.lock);
|
|
|
|
|
|
|
|
|
|
return *pos ? ping_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void *ping_seq_next(struct seq_file *seq, void *v, loff_t *pos)
|
|
|
|
|
{
|
|
|
|
|
struct sock *sk;
|
|
|
|
|
|
|
|
|
|
if (v == SEQ_START_TOKEN)
|
|
|
|
|
sk = ping_get_idx(seq, 0);
|
|
|
|
|
else
|
|
|
|
|
sk = ping_get_next(seq, v);
|
|
|
|
|
|
|
|
|
|
++*pos;
|
|
|
|
|
return sk;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_seq_stop(struct seq_file *seq, void *v)
|
|
|
|
|
{
|
|
|
|
|
read_unlock_bh(&ping_table.lock);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_format_sock(struct sock *sp, struct seq_file *f,
|
|
|
|
|
int bucket, int *len)
|
|
|
|
|
{
|
|
|
|
|
struct inet_sock *inet = inet_sk(sp);
|
|
|
|
|
__be32 dest = inet->inet_daddr;
|
|
|
|
|
__be32 src = inet->inet_rcv_saddr;
|
|
|
|
|
__u16 destp = ntohs(inet->inet_dport);
|
|
|
|
|
__u16 srcp = ntohs(inet->inet_sport);
|
|
|
|
|
|
|
|
|
|
seq_printf(f, "%5d: %08X:%04X %08X:%04X"
|
|
|
|
|
" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %pK %d%n",
|
|
|
|
|
bucket, src, srcp, dest, destp, sp->sk_state,
|
|
|
|
|
sk_wmem_alloc_get(sp),
|
|
|
|
|
sk_rmem_alloc_get(sp),
|
|
|
|
|
0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
|
|
|
|
|
atomic_read(&sp->sk_refcnt), sp,
|
|
|
|
|
atomic_read(&sp->sk_drops), len);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ping_seq_show(struct seq_file *seq, void *v)
|
|
|
|
|
{
|
|
|
|
|
if (v == SEQ_START_TOKEN)
|
|
|
|
|
seq_printf(seq, "%-127s\n",
|
|
|
|
|
" sl local_address rem_address st tx_queue "
|
|
|
|
|
"rx_queue tr tm->when retrnsmt uid timeout "
|
|
|
|
|
"inode ref pointer drops");
|
|
|
|
|
else {
|
|
|
|
|
struct ping_iter_state *state = seq->private;
|
|
|
|
|
int len;
|
|
|
|
|
|
|
|
|
|
ping_format_sock(v, seq, state->bucket, &len);
|
|
|
|
|
seq_printf(seq, "%*s\n", 127 - len, "");
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct seq_operations ping_seq_ops = {
|
|
|
|
|
.show = ping_seq_show,
|
|
|
|
|
.start = ping_seq_start,
|
|
|
|
|
.next = ping_seq_next,
|
|
|
|
|
.stop = ping_seq_stop,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ping_seq_open(struct inode *inode, struct file *file)
|
|
|
|
|
{
|
|
|
|
|
return seq_open_net(inode, file, &ping_seq_ops,
|
|
|
|
|
sizeof(struct ping_iter_state));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct file_operations ping_seq_fops = {
|
|
|
|
|
.open = ping_seq_open,
|
|
|
|
|
.read = seq_read,
|
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
|
.release = seq_release_net,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ping_proc_register(struct net *net)
|
|
|
|
|
{
|
|
|
|
|
struct proc_dir_entry *p;
|
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
|
|
p = proc_net_fops_create(net, "icmp", S_IRUGO, &ping_seq_fops);
|
|
|
|
|
if (!p)
|
|
|
|
|
rc = -ENOMEM;
|
|
|
|
|
return rc;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ping_proc_unregister(struct net *net)
|
|
|
|
|
{
|
|
|
|
|
proc_net_remove(net, "icmp");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int __net_init ping_proc_init_net(struct net *net)
|
|
|
|
|
{
|
|
|
|
|
return ping_proc_register(net);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __net_exit ping_proc_exit_net(struct net *net)
|
|
|
|
|
{
|
|
|
|
|
ping_proc_unregister(net);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct pernet_operations ping_net_ops = {
|
|
|
|
|
.init = ping_proc_init_net,
|
|
|
|
|
.exit = ping_proc_exit_net,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
int __init ping_proc_init(void)
|
|
|
|
|
{
|
|
|
|
|
return register_pernet_subsys(&ping_net_ops);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void ping_proc_exit(void)
|
|
|
|
|
{
|
|
|
|
|
unregister_pernet_subsys(&ping_net_ops);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
void __init ping_init(void)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < PING_HTABLE_SIZE; i++)
|
|
|
|
|
INIT_HLIST_NULLS_HEAD(&ping_table.hash[i], i);
|
|
|
|
|
rwlock_init(&ping_table.lock);
|
|
|
|
|
}
|
