leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2220fb2960
linux/drivers/net/can/Makefile

36 lines
962 B
Makefile
Raw Normal View History

[CAN]: Add virtual CAN netdevice driver This patch adds the virtual CAN bus (vcan) network driver. The vcan device is just a loopback device for CAN frames, no real CAN hardware is involved. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 23:56:08 +00:00
#
# Makefile for the Linux Controller Area Network drivers.
#
obj-$(CONFIG_CAN_VCAN) += vcan.o
can: add slcan driver for serial/USB-serial CAN adapters This patch adds support for serial/USB-serial CAN adapters implementing the LAWICEL ASCII protocol for CAN frame transport over serial lines. The driver implements the SLCAN line discipline and is heavily based on the slip.c driver. Therefore the code style remains similar to slip.c to be able to apply changes of the SLIP driver to the SLCAN driver easily. For more details see the slcan Kconfig entry. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02 10:57:59 +00:00
obj-$(CONFIG_CAN_SLCAN) += slcan.o
can: CAN Network device driver and Netlink interface The CAN network device driver interface provides a generic interface to setup, configure and monitor CAN network devices. It exports a set of common data structures and functions, which all real CAN network device drivers should use. Please have a look to the SJA1000 or MSCAN driver to understand how to use them. The name of the module is can-dev.ko. Furthermore, it adds a Netlink interface allowing to configure the CAN device using the program "ip" from the iproute2 utility suite. For further information please check "Documentation/networking/can.txt" Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-15 23:39:29 +00:00
obj-$(CONFIG_CAN_DEV) += can-dev.o
can: rx-offload: Add support for HW fifo based irq offloading Some CAN controllers have a usable FIFO already but can still benefit from off-loading the CAN controller FIFO. The CAN frames of the FIFO are read and put into a skb queue during interrupt and then transmitted in a NAPI context. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-10-10 15:30:10 +00:00
can-dev-y += dev.o
can-dev-y += rx-offload.o
can: CAN Network device driver and Netlink interface The CAN network device driver interface provides a generic interface to setup, configure and monitor CAN network devices. It exports a set of common data structures and functions, which all real CAN network device drivers should use. Please have a look to the SJA1000 or MSCAN driver to understand how to use them. The name of the module is can-dev.ko. Furthermore, it adds a Netlink interface allowing to configure the CAN device using the program "ip" from the iproute2 utility suite. For further information please check "Documentation/networking/can.txt" Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-15 23:39:29 +00:00
can: add tx/rx LED trigger support This patch implements the functions to add two LED triggers, named <ifname>-tx and <ifname>-rx, to a canbus device driver. Triggers are called from specific handlers by each CAN device driver and can be disabled altogether with a Kconfig option. The implementation keeps the LED on when the interface is UP and blinks the LED on network activity at a configurable rate. This only supports can-dev based drivers, as it uses some support field in the can_priv structure. Supported drivers should call devm_can_led_init() and can_led_event() as needed. Cleanup is handled automatically by devres, so no *_exit function is needed. Supported events are: - CAN_LED_EVENT_OPEN: turn on tx/rx LEDs - CAN_LED_EVENT_STOP: turn off tx/rx LEDs - CAN_LED_EVENT_TX: trigger tx LED blink - CAN_LED_EVENT_RX: trigger tx LED blink Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-12-18 17:50:55 +00:00
can-dev-$(CONFIG_CAN_LEDS) += led.o
can: rcar_canfd: Add Renesas R-Car CAN FD driver This patch adds support for the CAN FD controller found in Renesas R-Car SoCs. The controller operates in CAN FD only mode by default. CAN FD mode supports both Classical CAN & CAN FD frame formats. The controller supports ISO 11898-1:2015 CAN FD format only. This controller supports two channels and the driver can enable either or both of the channels. Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs (one per channel) for transmission. Rx filter rules are configured to the minimum (one per channel) and it accepts Standard, Extended, Data & Remote Frame combinations. Note: There are few documentation errors in R-Car Gen3 Hardware User Manual v0.5E with respect to CAN FD controller. They are listed below: 1. CAN FD interrupt numbers 29 & 30 are listed as per channel interrupts. However, they are common to both channels (i.e.) they are global and channel interrupts respectively. 2. CANFD clock is derived from PLL1. This is not documented. 3. CANFD clock is further divided by (1/2) within the CAN FD controller. This is not documented. 4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It is specified 4 Tq in the manual. 5. The maximum number of message RAM area the controller can use is 3584 bytes. It is specified 10752 bytes in the manual. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-17 08:20:55 +00:00
obj-y += rcar/
can: move SPI drivers into a separate directory Create a directory for all CAN drivers using SPI and move mcp251x driver there. Signed-off-by: Stefano Babic <sbabic@denx.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-25 14:30:21 +00:00
obj-y += spi/
ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 02:04:20 +00:00
obj-y += usb/
can: add driver for Softing card This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11 04:32:31 +00:00
obj-y += softing/
ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 02:04:20 +00:00
at91_can: add driver for Atmel's CAN controller on AT91SAM9263 This patch add the driver for the SoC CAN controller in Atmel's AT91SAM9263. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22 21:46:57 +00:00
obj-$(CONFIG_CAN_AT91) += at91_can.o
can: add the driver for Analog Devices Blackfin on-chip CAN controllers Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: H.J. Oertel <oe@port.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-10 23:46:28 +00:00
obj-$(CONFIG_CAN_BFIN) += bfin_can.o
can: Makefile: Sort the Makefile Just sort the drivers in the Makefile, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-01-11 18:48:00 +00:00
obj-$(CONFIG_CAN_CC770) += cc770/
obj-$(CONFIG_CAN_C_CAN) += c_can/
CAN: Add Flexcan CAN controller driver This core is found on some Freescale SoCs and also some Coldfire SoCs. Support for Coldfire is missing though at the moment as they have an older revision of the core which does not have RX FIFO support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-07-29 08:20:10 +00:00
obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
can: grcan: Add device driver for GRCAN and GRHCAN cores This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-15 07:47:14 +00:00
obj-$(CONFIG_CAN_GRCAN) += grcan.o
can: ifi: Add IFI CANFD IP support The patch adds support for IFI CAN/FD controller [1]. This driver currently supports sending and receiving both standard CAN and new CAN/FD frames. Both ISO and BOSCH variant of CAN/FD is supported. [1] http://www.ifi-pld.de/IP/CANFD/canfd.html Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-01-20 14:33:39 +00:00
obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd/
can: Makefile: Sort the Makefile Just sort the drivers in the Makefile, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-01-11 18:48:00 +00:00
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
obj-$(CONFIG_CAN_MSCAN) += mscan/
obj-$(CONFIG_CAN_M_CAN) += m_can/
obj-$(CONFIG_CAN_SJA1000) += sja1000/
can: Allwinner A10/A20 CAN Controller support - Kernel module Kernel module for Allwinner A10/A20 CAN controller. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-09-16 11:21:22 +00:00
obj-$(CONFIG_CAN_SUN4I) += sun4i_can.o
can: Makefile: Sort the Makefile Just sort the drivers in the Makefile, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-01-11 18:48:00 +00:00
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
can: xilinx CAN controller support This patch adds xilinx CAN controller support. This driver supports both ZYNQ CANPS and Soft IP AXI CAN controller. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-21 07:00:59 +00:00
obj-$(CONFIG_CAN_XILINXCAN) += xilinx_can.o
can: Makefile: Sort the Makefile Just sort the drivers in the Makefile, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-01-11 18:48:00 +00:00
obj-$(CONFIG_PCH_CAN) += pch_can.o
can: Driver for the SJA1000 CAN controller This patch adds the generic Socket-CAN driver for the Philips SJA1000 full CAN controller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-15 23:39:30 +00:00
can: Enable -D__CHECK_ENDIAN__ for sparse by default This patch enables endian checking by default when running sparse via "make C=2" for example. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-11-27 21:33:58 +00:00
subdir-ccflags-$(CONFIG_CAN_DEBUG_DEVICES) += -DDEBUG
Reference in New Issue Copy Permalink