leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1acc04cd4c
linux/include/asm-x86_64/vsyscall.h

69 lines
2.0 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifndef _ASM_X86_64_VSYSCALL_H_
#define _ASM_X86_64_VSYSCALL_H_
enum vsyscall_num {
__NR_vgettimeofday,
__NR_vtime,
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
__NR_vgetcpu,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
#define VSYSCALL_START (-10UL << 20)
#define VSYSCALL_SIZE 1024
#define VSYSCALL_END (-2UL << 20)
#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
#ifdef __KERNEL__
[PATCH] Fix 'make headers_check' on x86_64 On Tue, 2006-09-12 at 17:44 +0100, David Woodhouse wrote: > asm-x86_64/elf.h requires asm/processor.h, which does not exist > asm-x86_64/signal.h requires linux/linkage.h, which does not exist > asm-x86_64/unistd.h requires linux/linkage.h, which does not exist > asm-x86_64/vsyscall.h requires linux/seqlock.h, which does not exist Again, move stuff which shouldn't be visible inside (mostly already existing) #ifdef __KERNEL__. This fixes a bunch of mislabelled and unlabelled #endifs in unistd.h and also cleans that up to conform with what's visible on other architectures, since the minimal fix for the error reported about would have involved a more intrusive patch, renesting other ifdefs. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16 19:15:48 +00:00
#include <linux/seqlock.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define __section_vxtime __attribute__ ((unused, __section__ (".vxtime"), aligned(16)))
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
#define __section_sys_tz __attribute__ ((unused, __section__ (".sys_tz"), aligned(16)))
#define __section_sysctl_vsyscall __attribute__ ((unused, __section__ (".sysctl_vsyscall"), aligned(16)))
#define __section_xtime __attribute__ ((unused, __section__ (".xtime"), aligned(16)))
#define __section_xtime_lock __attribute__ ((unused, __section__ (".xtime_lock"), aligned(16)))
#define VXTIME_TSC 1
#define VXTIME_HPET 2
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 04:53:28 +00:00
#define VXTIME_PMTMR 3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
#define VGETCPU_RDTSCP 1
#define VGETCPU_LSL 2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct vxtime_data {
long hpet_address; /* HPET base address */
int last;
unsigned long last_tsc;
long quot;
long tsc_quot;
int mode;
};
[PATCH] x86_64: sparse warning cleanups Fix some trivial sparse warnings in x86_64 code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:46:30 +00:00
#define hpet_readl(a) readl((const void __iomem *)fix_to_virt(FIX_HPET_BASE) + a)
#define hpet_writel(d,a) writel(d, (void __iomem *)fix_to_virt(FIX_HPET_BASE) + a)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* vsyscall space (readonly) */
extern struct vxtime_data __vxtime;
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
extern int __vgetcpu_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct timespec __xtime;
extern volatile unsigned long __jiffies;
extern struct timezone __sys_tz;
extern seqlock_t __xtime_lock;
/* kernel space (writeable) */
extern struct vxtime_data vxtime;
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
extern int vgetcpu_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct timezone sys_tz;
extern int sysctl_vsyscall;
extern seqlock_t xtime_lock;
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 04:53:28 +00:00
extern int sysctl_vsyscall;
[PATCH] Add the vgetcpu vsyscall This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:28 +00:00
extern void vsyscall_set_cpu(int cpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define ARCH_HAVE_XTIME_LOCK 1
#endif /* __KERNEL__ */
#endif /* _ASM_X86_64_VSYSCALL_H_ */
Reference in New Issue Copy Permalink