linux/drivers/iio/proximity/Kconfig

#
# Proximity sensors
#

menu "Lightning sensors"

config AS3935
	tristate "AS3935 Franklin lightning sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on SPI
	help
	  Say Y here to build SPI interface support for the Austrian
	  Microsystems AS3935 lightning detection sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called as3935

endmenu

menu "Proximity and distance sensors"

config LIDAR_LITE_V2
	tristate "PulsedLight LIDAR sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on I2C
	help
	  Say Y to build a driver for PulsedLight LIDAR range finding
	  sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called pulsedlight-lite-v2

config RFD77402
	tristate "RFD77402 ToF sensor"
	depends on I2C
	help
	  Say Y to build a driver for the RFD77420 Time-of-Flight (distance)
	  sensor module with I2C interface.

	  To compile this driver as a module, choose M here: the
	  module will be called rfd77402.

config SRF04
	tristate "Devantech SRF04 ultrasonic ranger sensor"
	depends on GPIOLIB
	help
	  Say Y here to build a driver for Devantech SRF04 ultrasonic
	  ranger sensor. This driver can be used to measure the distance
	  of objects. It is using two GPIOs.

	  To compile this driver as a module, choose M here: the
	  module will be called srf04.

config SX9500
	tristate "SX9500 Semtech proximity sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP_I2C
	depends on I2C
	help
	  Say Y here to build a driver for Semtech's SX9500 capacitive
	  proximity/button sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called sx9500.

config SRF08
	tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on I2C
	help
	  Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
	  ultrasonic ranger sensors with i2c interface.
	  This driver can be used to measure the distance of objects.

	  To compile this driver as a module, choose M here: the
	  module will be called srf08.

endmenu
iio: Add AS3935 lightning sensor support AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-12-03 12:53:00 +00:00			`#`
			`# Proximity sensors`
			`#`

			`menu "Lightning sensors"`

			`config AS3935`
			`tristate "AS3935 Franklin lightning sensor"`
			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
			`depends on SPI`
			`help`
			`Say Y here to build SPI interface support for the Austrian`
			`Microsystems AS3935 lightning detection sensor.`

			`To compile this driver as a module, choose M here: the`
			`module will be called as3935`

			`endmenu`
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-12-29 12:41:14 +00:00
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-01-25 19:07:19 +00:00			`menu "Proximity and distance sensors"`
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-12-29 12:41:14 +00:00
iio: proximity: add support for PulsedLight LIDAR Add support for the PulsedLight LIDAR rangefinder sensor which allows high speed (over 300Hz) distance measurements using Barker Coding within 40 meter range. Support only tested on the "blue label" rev 2, but may work using low sample frequencies on the original version. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2015-08-18 14:40:38 +00:00			`config LIDAR_LITE_V2`
			`tristate "PulsedLight LIDAR sensor"`
			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
			`depends on I2C`
			`help`
			`Say Y to build a driver for PulsedLight LIDAR range finding`
			`sensor.`

			`To compile this driver as a module, choose M here: the`
			`module will be called pulsedlight-lite-v2`

iio: proximity: Add rfd77402 driver Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with millimeter precision Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 2017-10-10 13:48:47 +00:00			`config RFD77402`
			`tristate "RFD77402 ToF sensor"`
			`depends on I2C`
			`help`
			`Say Y to build a driver for the RFD77420 Time-of-Flight (distance)`
			`sensor module with I2C interface.`

			`To compile this driver as a module, choose M here: the`
			`module will be called rfd77402.`

iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-01-31 18:03:45 +00:00			`config SRF04`
			`tristate "Devantech SRF04 ultrasonic ranger sensor"`
			`depends on GPIOLIB`
			`help`
			`Say Y here to build a driver for Devantech SRF04 ultrasonic`
			`ranger sensor. This driver can be used to measure the distance`
			`of objects. It is using two GPIOs.`

			`To compile this driver as a module, choose M here: the`
			`module will be called srf04.`

iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-12-29 12:41:14 +00:00			`config SX9500`
			`tristate "SX9500 Semtech proximity sensor"`
			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
			`select REGMAP_I2C`
			`depends on I2C`
			`help`
			`Say Y here to build a driver for Semtech's SX9500 capacitive`
			`proximity/button sensor.`

			`To compile this driver as a module, choose M here: the`
			`module will be called sx9500.`

iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-01-25 19:07:19 +00:00			`config SRF08`
iio: srf08: add support for srf02 in i2c mode srf02 added with support for i2c interface Attributes for setting max range or sensitivity are omitted for the case of srf02 type sensor, because they are not supported by the hardware. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 2017-08-16 19:34:54 +00:00			`tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"`
iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined Functions for triggered buffer support are needed by this module. If they are not defined accidentally by another driver, there's an error thrown out while linking. Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Fixes: a83195937151 ("iio: srf08: add triggered buffer support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 2018-02-01 20:49:24 +00:00			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-01-25 19:07:19 +00:00			`depends on I2C`
			`help`
iio: srf08: add support for srf02 in i2c mode srf02 added with support for i2c interface Attributes for setting max range or sensitivity are omitted for the case of srf02 type sensor, because they are not supported by the hardware. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 2017-08-16 19:34:54 +00:00			`Say Y here to build a driver for Devantech SRF02/SRF08/SRF10`
			`ultrasonic ranger sensors with i2c interface.`
			`This driver can be used to measure the distance of objects.`
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-01-25 19:07:19 +00:00
			`To compile this driver as a module, choose M here: the`
			`module will be called srf08.`

iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-12-29 12:41:14 +00:00			`endmenu`