License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2009-08-17 14:18:08 +00:00
|
|
|
#include "builtin.h"
|
|
|
|
|
2010-08-05 13:51:38 +00:00
|
|
|
#include "perf.h"
|
2009-08-17 14:18:08 +00:00
|
|
|
#include "util/cache.h"
|
2010-08-05 13:51:38 +00:00
|
|
|
#include "util/debug.h"
|
2015-12-15 15:39:39 +00:00
|
|
|
#include <subcmd/exec-cmd.h>
|
2010-08-05 13:51:38 +00:00
|
|
|
#include "util/header.h"
|
2015-12-15 15:39:39 +00:00
|
|
|
#include <subcmd/parse-options.h>
|
2015-08-31 16:41:10 +00:00
|
|
|
#include "util/perf_regs.h"
|
2010-08-05 13:51:38 +00:00
|
|
|
#include "util/session.h"
|
2011-11-28 10:30:20 +00:00
|
|
|
#include "util/tool.h"
|
2009-08-17 14:18:08 +00:00
|
|
|
#include "util/symbol.h"
|
|
|
|
#include "util/thread.h"
|
2009-11-28 09:11:00 +00:00
|
|
|
#include "util/trace-event.h"
|
2010-08-05 13:51:38 +00:00
|
|
|
#include "util/util.h"
|
2011-03-10 05:23:28 +00:00
|
|
|
#include "util/evlist.h"
|
|
|
|
#include "util/evsel.h"
|
2012-09-07 08:42:24 +00:00
|
|
|
#include "util/sort.h"
|
2013-10-15 14:27:32 +00:00
|
|
|
#include "util/data.h"
|
2015-04-09 15:53:56 +00:00
|
|
|
#include "util/auxtrace.h"
|
2016-01-05 21:09:06 +00:00
|
|
|
#include "util/cpumap.h"
|
|
|
|
#include "util/thread_map.h"
|
|
|
|
#include "util/stat.h"
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
#include "util/color.h"
|
2017-04-17 19:51:59 +00:00
|
|
|
#include "util/string2.h"
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
#include "util/thread-stack.h"
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
#include "util/time-utils.h"
|
2017-12-06 17:45:35 +00:00
|
|
|
#include "util/path.h"
|
2017-04-17 19:23:22 +00:00
|
|
|
#include "print_binary.h"
|
2011-07-04 11:57:50 +00:00
|
|
|
#include <linux/bitmap.h>
|
2017-04-17 14:39:06 +00:00
|
|
|
#include <linux/kernel.h>
|
2016-04-14 21:15:18 +00:00
|
|
|
#include <linux/stringify.h>
|
2016-08-05 18:40:30 +00:00
|
|
|
#include <linux/time64.h>
|
2016-01-05 21:09:06 +00:00
|
|
|
#include "asm/bug.h"
|
2016-02-24 08:46:54 +00:00
|
|
|
#include "util/mem-events.h"
|
2017-02-23 23:46:34 +00:00
|
|
|
#include "util/dump-insn.h"
|
2017-04-18 15:26:44 +00:00
|
|
|
#include <dirent.h>
|
2017-04-18 13:46:11 +00:00
|
|
|
#include <errno.h>
|
2017-04-17 18:23:08 +00:00
|
|
|
#include <inttypes.h>
|
2017-04-19 18:49:18 +00:00
|
|
|
#include <signal.h>
|
2017-04-19 21:51:14 +00:00
|
|
|
#include <sys/param.h>
|
2017-04-19 23:57:47 +00:00
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
2018-01-22 19:42:16 +00:00
|
|
|
#include <fcntl.h>
|
2017-04-19 23:57:47 +00:00
|
|
|
#include <unistd.h>
|
2009-08-17 14:18:08 +00:00
|
|
|
|
2017-04-17 19:10:49 +00:00
|
|
|
#include "sane_ctype.h"
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
static char const *script_name;
|
|
|
|
static char const *generate_script_lang;
|
2010-05-27 14:27:47 +00:00
|
|
|
static bool debug_mode;
|
2010-04-23 23:55:09 +00:00
|
|
|
static u64 last_timestamp;
|
2010-05-27 13:46:25 +00:00
|
|
|
static u64 nr_unordered;
|
2011-03-10 05:23:27 +00:00
|
|
|
static bool no_callchain;
|
2013-06-04 05:20:28 +00:00
|
|
|
static bool latency_format;
|
2011-11-25 14:05:25 +00:00
|
|
|
static bool system_wide;
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
static bool print_flags;
|
2015-09-25 13:15:36 +00:00
|
|
|
static bool nanosecs;
|
2011-07-04 11:57:50 +00:00
|
|
|
static const char *cpu_list;
|
|
|
|
static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
|
2016-01-05 21:09:07 +00:00
|
|
|
static struct perf_stat_config stat_config;
|
2017-02-23 23:46:34 +00:00
|
|
|
static int max_blocks;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
2015-09-25 13:15:50 +00:00
|
|
|
unsigned int scripting_max_stack = PERF_MAX_STACK_DEPTH;
|
2015-09-25 13:15:49 +00:00
|
|
|
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
enum perf_output_field {
|
|
|
|
PERF_OUTPUT_COMM = 1U << 0,
|
|
|
|
PERF_OUTPUT_TID = 1U << 1,
|
|
|
|
PERF_OUTPUT_PID = 1U << 2,
|
|
|
|
PERF_OUTPUT_TIME = 1U << 3,
|
|
|
|
PERF_OUTPUT_CPU = 1U << 4,
|
|
|
|
PERF_OUTPUT_EVNAME = 1U << 5,
|
|
|
|
PERF_OUTPUT_TRACE = 1U << 6,
|
2011-05-27 20:28:43 +00:00
|
|
|
PERF_OUTPUT_IP = 1U << 7,
|
|
|
|
PERF_OUTPUT_SYM = 1U << 8,
|
2011-05-27 20:28:44 +00:00
|
|
|
PERF_OUTPUT_DSO = 1U << 9,
|
2011-05-30 19:08:23 +00:00
|
|
|
PERF_OUTPUT_ADDR = 1U << 10,
|
2012-01-30 04:43:15 +00:00
|
|
|
PERF_OUTPUT_SYMOFFSET = 1U << 11,
|
2013-12-06 07:42:57 +00:00
|
|
|
PERF_OUTPUT_SRCLINE = 1U << 12,
|
2014-08-25 14:45:42 +00:00
|
|
|
PERF_OUTPUT_PERIOD = 1U << 13,
|
2015-08-31 16:41:10 +00:00
|
|
|
PERF_OUTPUT_IREGS = 1U << 14,
|
2015-08-31 16:41:13 +00:00
|
|
|
PERF_OUTPUT_BRSTACK = 1U << 15,
|
|
|
|
PERF_OUTPUT_BRSTACKSYM = 1U << 16,
|
2016-02-15 08:34:51 +00:00
|
|
|
PERF_OUTPUT_DATA_SRC = 1U << 17,
|
|
|
|
PERF_OUTPUT_WEIGHT = 1U << 18,
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
PERF_OUTPUT_BPF_OUTPUT = 1U << 19,
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
PERF_OUTPUT_CALLINDENT = 1U << 20,
|
2016-10-07 13:42:27 +00:00
|
|
|
PERF_OUTPUT_INSN = 1U << 21,
|
|
|
|
PERF_OUTPUT_INSNLEN = 1U << 22,
|
2017-02-23 23:46:34 +00:00
|
|
|
PERF_OUTPUT_BRSTACKINSN = 1U << 23,
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
PERF_OUTPUT_BRSTACKOFF = 1U << 24,
|
2017-05-26 08:17:22 +00:00
|
|
|
PERF_OUTPUT_SYNTH = 1U << 25,
|
2017-08-29 17:11:11 +00:00
|
|
|
PERF_OUTPUT_PHYS_ADDR = 1U << 26,
|
2017-09-05 18:40:57 +00:00
|
|
|
PERF_OUTPUT_UREGS = 1U << 27,
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
PERF_OUTPUT_METRIC = 1U << 28,
|
2018-01-07 16:03:52 +00:00
|
|
|
PERF_OUTPUT_MISC = 1U << 29,
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct output_option {
|
|
|
|
const char *str;
|
|
|
|
enum perf_output_field field;
|
|
|
|
} all_output_options[] = {
|
|
|
|
{.str = "comm", .field = PERF_OUTPUT_COMM},
|
|
|
|
{.str = "tid", .field = PERF_OUTPUT_TID},
|
|
|
|
{.str = "pid", .field = PERF_OUTPUT_PID},
|
|
|
|
{.str = "time", .field = PERF_OUTPUT_TIME},
|
|
|
|
{.str = "cpu", .field = PERF_OUTPUT_CPU},
|
|
|
|
{.str = "event", .field = PERF_OUTPUT_EVNAME},
|
|
|
|
{.str = "trace", .field = PERF_OUTPUT_TRACE},
|
2011-05-27 20:28:43 +00:00
|
|
|
{.str = "ip", .field = PERF_OUTPUT_IP},
|
2011-03-10 05:23:27 +00:00
|
|
|
{.str = "sym", .field = PERF_OUTPUT_SYM},
|
2011-05-27 20:28:44 +00:00
|
|
|
{.str = "dso", .field = PERF_OUTPUT_DSO},
|
2011-05-30 19:08:23 +00:00
|
|
|
{.str = "addr", .field = PERF_OUTPUT_ADDR},
|
2012-01-30 04:43:15 +00:00
|
|
|
{.str = "symoff", .field = PERF_OUTPUT_SYMOFFSET},
|
2013-12-06 07:42:57 +00:00
|
|
|
{.str = "srcline", .field = PERF_OUTPUT_SRCLINE},
|
2014-08-25 14:45:42 +00:00
|
|
|
{.str = "period", .field = PERF_OUTPUT_PERIOD},
|
2015-08-31 16:41:10 +00:00
|
|
|
{.str = "iregs", .field = PERF_OUTPUT_IREGS},
|
2017-09-05 18:40:57 +00:00
|
|
|
{.str = "uregs", .field = PERF_OUTPUT_UREGS},
|
2015-08-31 16:41:13 +00:00
|
|
|
{.str = "brstack", .field = PERF_OUTPUT_BRSTACK},
|
|
|
|
{.str = "brstacksym", .field = PERF_OUTPUT_BRSTACKSYM},
|
2016-02-15 08:34:51 +00:00
|
|
|
{.str = "data_src", .field = PERF_OUTPUT_DATA_SRC},
|
|
|
|
{.str = "weight", .field = PERF_OUTPUT_WEIGHT},
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
{.str = "bpf-output", .field = PERF_OUTPUT_BPF_OUTPUT},
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
{.str = "callindent", .field = PERF_OUTPUT_CALLINDENT},
|
2016-10-07 13:42:27 +00:00
|
|
|
{.str = "insn", .field = PERF_OUTPUT_INSN},
|
|
|
|
{.str = "insnlen", .field = PERF_OUTPUT_INSNLEN},
|
2017-02-23 23:46:34 +00:00
|
|
|
{.str = "brstackinsn", .field = PERF_OUTPUT_BRSTACKINSN},
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
{.str = "brstackoff", .field = PERF_OUTPUT_BRSTACKOFF},
|
2017-05-26 08:17:22 +00:00
|
|
|
{.str = "synth", .field = PERF_OUTPUT_SYNTH},
|
2017-08-29 17:11:11 +00:00
|
|
|
{.str = "phys_addr", .field = PERF_OUTPUT_PHYS_ADDR},
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
{.str = "metric", .field = PERF_OUTPUT_METRIC},
|
2018-01-07 16:03:52 +00:00
|
|
|
{.str = "misc", .field = PERF_OUTPUT_MISC},
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
};
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
enum {
|
|
|
|
OUTPUT_TYPE_SYNTH = PERF_TYPE_MAX,
|
|
|
|
OUTPUT_TYPE_MAX
|
|
|
|
};
|
|
|
|
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
/* default set to maintain compatibility with current format */
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
static struct {
|
|
|
|
bool user_set;
|
2011-04-07 03:54:20 +00:00
|
|
|
bool wildcard_set;
|
2013-08-08 02:50:51 +00:00
|
|
|
unsigned int print_ip_opts;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
u64 fields;
|
|
|
|
u64 invalid_fields;
|
2017-06-21 10:17:19 +00:00
|
|
|
} output[OUTPUT_TYPE_MAX] = {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
|
|
|
|
[PERF_TYPE_HARDWARE] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
2011-05-27 20:28:43 +00:00
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
|
2014-08-25 14:45:43 +00:00
|
|
|
PERF_OUTPUT_SYM | PERF_OUTPUT_DSO |
|
|
|
|
PERF_OUTPUT_PERIOD,
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
.invalid_fields = PERF_OUTPUT_TRACE | PERF_OUTPUT_BPF_OUTPUT,
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
},
|
|
|
|
|
|
|
|
[PERF_TYPE_SOFTWARE] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
2011-05-27 20:28:43 +00:00
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
|
2014-08-25 14:45:43 +00:00
|
|
|
PERF_OUTPUT_SYM | PERF_OUTPUT_DSO |
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
PERF_OUTPUT_PERIOD | PERF_OUTPUT_BPF_OUTPUT,
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
|
|
|
|
.invalid_fields = PERF_OUTPUT_TRACE,
|
|
|
|
},
|
|
|
|
|
|
|
|
[PERF_TYPE_TRACEPOINT] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
},
|
2011-04-14 17:38:18 +00:00
|
|
|
|
|
|
|
[PERF_TYPE_RAW] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
2011-05-27 20:28:43 +00:00
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
|
2014-08-25 14:45:43 +00:00
|
|
|
PERF_OUTPUT_SYM | PERF_OUTPUT_DSO |
|
2016-02-15 08:34:52 +00:00
|
|
|
PERF_OUTPUT_PERIOD | PERF_OUTPUT_ADDR |
|
2017-08-29 17:11:11 +00:00
|
|
|
PERF_OUTPUT_DATA_SRC | PERF_OUTPUT_WEIGHT |
|
|
|
|
PERF_OUTPUT_PHYS_ADDR,
|
2011-04-14 17:38:18 +00:00
|
|
|
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
.invalid_fields = PERF_OUTPUT_TRACE | PERF_OUTPUT_BPF_OUTPUT,
|
2011-04-14 17:38:18 +00:00
|
|
|
},
|
perf script: Add support for PERF_TYPE_BREAKPOINT
Useful for getting stack traces for hardware breakpoint events.
Test result:
Before this patch:
# ~/perf record -g -e mem:0x600980 ./sample
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (12 samples) ]
# ~/perf script
# ~/perf script -F comm,tid,pid,time,event,ip,sym,dso
sample 22520/22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520/22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
...
After this patch:
# ~/perf script
sample 22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
Committer note:
So, further testing, lets do it for a kernel global variable,
tcp_hashinfo:
# grep -w tcp_hashinfo /proc/kallsyms
ffffffff8202fc00 B tcp_hashinfo
#
Note: allow specifying mem:tcp_hashinfo:
# perf record -g -e mem:0xffffffff81c65ac0 -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.790 MB perf.data ]
#
# perf evlist
mem:0xffffffff8202fc00
# perf evlist -v
mem:0xffffffff8202fc00: type: 5, size: 112, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, bp_type: 3, { bp_addr, config1 }: 0xffffffff8202fc00, { bp_len, config2 }: 0x4
#
Then, after this patch:
# perf script
swapper 0 [000] 171036.986988: mem:0xffffffff8202fc00:
8a0fb5 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
8bc09d tcp_v4_early_demux (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
804c27 cpuidle_enter (/lib/modules/4.3.0+/build/vmlinux)
2ded22 call_cpuidle (/lib/modules/4.3.0+/build/vmlinux)
2defb6 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-08 02:25:43 +00:00
|
|
|
|
|
|
|
[PERF_TYPE_BREAKPOINT] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
|
|
|
|
PERF_OUTPUT_SYM | PERF_OUTPUT_DSO |
|
|
|
|
PERF_OUTPUT_PERIOD,
|
|
|
|
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
.invalid_fields = PERF_OUTPUT_TRACE | PERF_OUTPUT_BPF_OUTPUT,
|
perf script: Add support for PERF_TYPE_BREAKPOINT
Useful for getting stack traces for hardware breakpoint events.
Test result:
Before this patch:
# ~/perf record -g -e mem:0x600980 ./sample
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (12 samples) ]
# ~/perf script
# ~/perf script -F comm,tid,pid,time,event,ip,sym,dso
sample 22520/22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520/22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
...
After this patch:
# ~/perf script
sample 22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
Committer note:
So, further testing, lets do it for a kernel global variable,
tcp_hashinfo:
# grep -w tcp_hashinfo /proc/kallsyms
ffffffff8202fc00 B tcp_hashinfo
#
Note: allow specifying mem:tcp_hashinfo:
# perf record -g -e mem:0xffffffff81c65ac0 -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.790 MB perf.data ]
#
# perf evlist
mem:0xffffffff8202fc00
# perf evlist -v
mem:0xffffffff8202fc00: type: 5, size: 112, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, bp_type: 3, { bp_addr, config1 }: 0xffffffff8202fc00, { bp_len, config2 }: 0x4
#
Then, after this patch:
# perf script
swapper 0 [000] 171036.986988: mem:0xffffffff8202fc00:
8a0fb5 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
8bc09d tcp_v4_early_demux (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
804c27 cpuidle_enter (/lib/modules/4.3.0+/build/vmlinux)
2ded22 call_cpuidle (/lib/modules/4.3.0+/build/vmlinux)
2defb6 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-08 02:25:43 +00:00
|
|
|
},
|
2017-06-21 10:17:19 +00:00
|
|
|
|
|
|
|
[OUTPUT_TYPE_SYNTH] = {
|
|
|
|
.user_set = false,
|
|
|
|
|
|
|
|
.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
|
|
|
|
PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
|
|
|
|
PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
|
2017-05-26 08:17:22 +00:00
|
|
|
PERF_OUTPUT_SYM | PERF_OUTPUT_DSO |
|
|
|
|
PERF_OUTPUT_SYNTH,
|
2017-06-21 10:17:19 +00:00
|
|
|
|
|
|
|
.invalid_fields = PERF_OUTPUT_TRACE | PERF_OUTPUT_BPF_OUTPUT,
|
|
|
|
},
|
2011-03-10 05:23:28 +00:00
|
|
|
};
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
2017-10-30 16:11:15 +00:00
|
|
|
struct perf_evsel_script {
|
|
|
|
char *filename;
|
|
|
|
FILE *fp;
|
|
|
|
u64 samples;
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
/* For metric output */
|
|
|
|
u64 val;
|
|
|
|
int gnum;
|
2017-10-30 16:11:15 +00:00
|
|
|
};
|
|
|
|
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
static inline struct perf_evsel_script *evsel_script(struct perf_evsel *evsel)
|
|
|
|
{
|
|
|
|
return (struct perf_evsel_script *)evsel->priv;
|
|
|
|
}
|
|
|
|
|
2017-10-30 16:11:15 +00:00
|
|
|
static struct perf_evsel_script *perf_evsel_script__new(struct perf_evsel *evsel,
|
2017-01-23 21:07:59 +00:00
|
|
|
struct perf_data *data)
|
2017-10-30 16:11:15 +00:00
|
|
|
{
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
struct perf_evsel_script *es = zalloc(sizeof(*es));
|
2017-10-30 16:11:15 +00:00
|
|
|
|
|
|
|
if (es != NULL) {
|
2017-01-23 21:25:41 +00:00
|
|
|
if (asprintf(&es->filename, "%s.%s.dump", data->file.path, perf_evsel__name(evsel)) < 0)
|
2017-10-30 16:11:15 +00:00
|
|
|
goto out_free;
|
|
|
|
es->fp = fopen(es->filename, "w");
|
|
|
|
if (es->fp == NULL)
|
|
|
|
goto out_free_filename;
|
|
|
|
}
|
|
|
|
|
|
|
|
return es;
|
|
|
|
out_free_filename:
|
|
|
|
zfree(&es->filename);
|
|
|
|
out_free:
|
|
|
|
free(es);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void perf_evsel_script__delete(struct perf_evsel_script *es)
|
|
|
|
{
|
|
|
|
zfree(&es->filename);
|
|
|
|
fclose(es->fp);
|
|
|
|
es->fp = NULL;
|
|
|
|
free(es);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int perf_evsel_script__fprintf(struct perf_evsel_script *es, FILE *fp)
|
|
|
|
{
|
|
|
|
struct stat st;
|
|
|
|
|
|
|
|
fstat(fileno(es->fp), &st);
|
|
|
|
return fprintf(fp, "[ perf script: Wrote %.3f MB %s (%" PRIu64 " samples) ]\n",
|
|
|
|
st.st_size / 1024.0 / 1024.0, es->filename, es->samples);
|
|
|
|
}
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
static inline int output_type(unsigned int type)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case PERF_TYPE_SYNTH:
|
|
|
|
return OUTPUT_TYPE_SYNTH;
|
|
|
|
default:
|
|
|
|
return type;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int attr_type(unsigned int type)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case OUTPUT_TYPE_SYNTH:
|
|
|
|
return PERF_TYPE_SYNTH;
|
|
|
|
default:
|
|
|
|
return type;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
static bool output_set_by_user(void)
|
|
|
|
{
|
|
|
|
int j;
|
2017-06-21 10:17:19 +00:00
|
|
|
for (j = 0; j < OUTPUT_TYPE_MAX; ++j) {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (output[j].user_set)
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
2011-04-07 03:54:20 +00:00
|
|
|
static const char *output_field2str(enum perf_output_field field)
|
|
|
|
{
|
|
|
|
int i, imax = ARRAY_SIZE(all_output_options);
|
|
|
|
const char *str = "";
|
|
|
|
|
|
|
|
for (i = 0; i < imax; ++i) {
|
|
|
|
if (all_output_options[i].field == field) {
|
|
|
|
str = all_output_options[i].str;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return str;
|
|
|
|
}
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
#define PRINT_FIELD(x) (output[output_type(attr->type)].fields & PERF_OUTPUT_##x)
|
2011-03-10 05:23:28 +00:00
|
|
|
|
2015-04-24 19:29:44 +00:00
|
|
|
static int perf_evsel__do_check_stype(struct perf_evsel *evsel,
|
|
|
|
u64 sample_type, const char *sample_msg,
|
|
|
|
enum perf_output_field field,
|
|
|
|
bool allow_user_set)
|
2011-03-10 05:23:28 +00:00
|
|
|
{
|
2012-06-12 16:35:44 +00:00
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
2017-06-21 10:17:19 +00:00
|
|
|
int type = output_type(attr->type);
|
2011-04-07 03:54:20 +00:00
|
|
|
const char *evname;
|
|
|
|
|
|
|
|
if (attr->sample_type & sample_type)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (output[type].user_set) {
|
2015-04-24 19:29:44 +00:00
|
|
|
if (allow_user_set)
|
|
|
|
return 0;
|
2012-06-12 16:35:44 +00:00
|
|
|
evname = perf_evsel__name(evsel);
|
2011-04-07 03:54:20 +00:00
|
|
|
pr_err("Samples for '%s' event do not have %s attribute set. "
|
|
|
|
"Cannot print '%s' field.\n",
|
|
|
|
evname, sample_msg, output_field2str(field));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* user did not ask for it explicitly so remove from the default list */
|
|
|
|
output[type].fields &= ~field;
|
2012-06-12 16:35:44 +00:00
|
|
|
evname = perf_evsel__name(evsel);
|
2011-04-07 03:54:20 +00:00
|
|
|
pr_debug("Samples for '%s' event do not have %s attribute set. "
|
|
|
|
"Skipping '%s' field.\n",
|
|
|
|
evname, sample_msg, output_field2str(field));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-04-24 19:29:44 +00:00
|
|
|
static int perf_evsel__check_stype(struct perf_evsel *evsel,
|
|
|
|
u64 sample_type, const char *sample_msg,
|
|
|
|
enum perf_output_field field)
|
|
|
|
{
|
|
|
|
return perf_evsel__do_check_stype(evsel, sample_type, sample_msg, field,
|
|
|
|
false);
|
|
|
|
}
|
|
|
|
|
2011-04-07 03:54:20 +00:00
|
|
|
static int perf_evsel__check_attr(struct perf_evsel *evsel,
|
|
|
|
struct perf_session *session)
|
|
|
|
{
|
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
2015-04-24 19:29:44 +00:00
|
|
|
bool allow_user_set;
|
|
|
|
|
2016-01-05 21:09:09 +00:00
|
|
|
if (perf_header__has_feat(&session->header, HEADER_STAT))
|
|
|
|
return 0;
|
|
|
|
|
2015-04-24 19:29:44 +00:00
|
|
|
allow_user_set = perf_header__has_feat(&session->header,
|
|
|
|
HEADER_AUXTRACE);
|
2011-04-07 03:54:20 +00:00
|
|
|
|
2011-03-10 05:23:28 +00:00
|
|
|
if (PRINT_FIELD(TRACE) &&
|
|
|
|
!perf_session__has_traces(session, "record -R"))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-05-27 20:28:43 +00:00
|
|
|
if (PRINT_FIELD(IP)) {
|
2012-06-12 16:35:44 +00:00
|
|
|
if (perf_evsel__check_stype(evsel, PERF_SAMPLE_IP, "IP",
|
|
|
|
PERF_OUTPUT_IP))
|
2011-03-10 05:23:28 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2011-05-30 19:08:23 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(ADDR) &&
|
2015-04-24 19:29:44 +00:00
|
|
|
perf_evsel__do_check_stype(evsel, PERF_SAMPLE_ADDR, "ADDR",
|
|
|
|
PERF_OUTPUT_ADDR, allow_user_set))
|
2011-05-30 19:08:23 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-02-15 08:34:51 +00:00
|
|
|
if (PRINT_FIELD(DATA_SRC) &&
|
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_DATA_SRC, "DATA_SRC",
|
|
|
|
PERF_OUTPUT_DATA_SRC))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (PRINT_FIELD(WEIGHT) &&
|
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_WEIGHT, "WEIGHT",
|
|
|
|
PERF_OUTPUT_WEIGHT))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-05-30 19:08:23 +00:00
|
|
|
if (PRINT_FIELD(SYM) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) {
|
|
|
|
pr_err("Display of symbols requested but neither sample IP nor "
|
|
|
|
"sample address\nis selected. Hence, no addresses to convert "
|
|
|
|
"to symbols.\n");
|
2011-05-27 20:28:43 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2012-01-30 04:43:15 +00:00
|
|
|
if (PRINT_FIELD(SYMOFFSET) && !PRINT_FIELD(SYM)) {
|
|
|
|
pr_err("Display of offsets requested but symbol is not"
|
|
|
|
"selected.\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2017-06-19 16:38:24 +00:00
|
|
|
if (PRINT_FIELD(DSO) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR) &&
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
!PRINT_FIELD(BRSTACK) && !PRINT_FIELD(BRSTACKSYM) && !PRINT_FIELD(BRSTACKOFF)) {
|
|
|
|
pr_err("Display of DSO requested but no address to convert. Select\n"
|
|
|
|
"sample IP, sample address, brstack, brstacksym, or brstackoff.\n");
|
2011-05-27 20:28:44 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2013-12-06 07:42:57 +00:00
|
|
|
if (PRINT_FIELD(SRCLINE) && !PRINT_FIELD(IP)) {
|
|
|
|
pr_err("Display of source line number requested but sample IP is not\n"
|
|
|
|
"selected. Hence, no address to lookup the source line number.\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2017-02-23 23:46:34 +00:00
|
|
|
if (PRINT_FIELD(BRSTACKINSN) &&
|
|
|
|
!(perf_evlist__combined_branch_type(session->evlist) &
|
|
|
|
PERF_SAMPLE_BRANCH_ANY)) {
|
|
|
|
pr_err("Display of branch stack assembler requested, but non all-branch filter set\n"
|
|
|
|
"Hint: run 'perf record -b ...'\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2011-03-10 05:23:28 +00:00
|
|
|
if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
|
2012-06-12 16:35:44 +00:00
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
|
|
|
|
PERF_OUTPUT_TID|PERF_OUTPUT_PID))
|
2011-03-10 05:23:28 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (PRINT_FIELD(TIME) &&
|
2012-06-12 16:35:44 +00:00
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_TIME, "TIME",
|
|
|
|
PERF_OUTPUT_TIME))
|
2011-03-10 05:23:28 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (PRINT_FIELD(CPU) &&
|
2015-04-24 19:29:44 +00:00
|
|
|
perf_evsel__do_check_stype(evsel, PERF_SAMPLE_CPU, "CPU",
|
|
|
|
PERF_OUTPUT_CPU, allow_user_set))
|
2011-03-10 05:23:28 +00:00
|
|
|
return -EINVAL;
|
2011-04-07 03:54:20 +00:00
|
|
|
|
2015-08-31 16:41:10 +00:00
|
|
|
if (PRINT_FIELD(IREGS) &&
|
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_REGS_INTR, "IREGS",
|
|
|
|
PERF_OUTPUT_IREGS))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2017-09-05 18:40:57 +00:00
|
|
|
if (PRINT_FIELD(UREGS) &&
|
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_REGS_USER, "UREGS",
|
|
|
|
PERF_OUTPUT_UREGS))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2017-08-29 17:11:11 +00:00
|
|
|
if (PRINT_FIELD(PHYS_ADDR) &&
|
|
|
|
perf_evsel__check_stype(evsel, PERF_SAMPLE_PHYS_ADDR, "PHYS_ADDR",
|
|
|
|
PERF_OUTPUT_PHYS_ADDR))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-04-07 03:54:20 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-11-01 13:51:30 +00:00
|
|
|
static void set_print_ip_opts(struct perf_event_attr *attr)
|
|
|
|
{
|
2017-06-21 10:17:19 +00:00
|
|
|
unsigned int type = output_type(attr->type);
|
2013-11-01 13:51:30 +00:00
|
|
|
|
|
|
|
output[type].print_ip_opts = 0;
|
|
|
|
if (PRINT_FIELD(IP))
|
2016-04-12 18:16:15 +00:00
|
|
|
output[type].print_ip_opts |= EVSEL__PRINT_IP;
|
2013-11-01 13:51:30 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(SYM))
|
2016-04-12 18:16:15 +00:00
|
|
|
output[type].print_ip_opts |= EVSEL__PRINT_SYM;
|
2013-11-01 13:51:30 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(DSO))
|
2016-04-12 18:16:15 +00:00
|
|
|
output[type].print_ip_opts |= EVSEL__PRINT_DSO;
|
2013-11-01 13:51:30 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(SYMOFFSET))
|
2016-04-12 18:16:15 +00:00
|
|
|
output[type].print_ip_opts |= EVSEL__PRINT_SYMOFFSET;
|
2013-12-06 07:42:57 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(SRCLINE))
|
2016-04-12 18:16:15 +00:00
|
|
|
output[type].print_ip_opts |= EVSEL__PRINT_SRCLINE;
|
2013-11-01 13:51:30 +00:00
|
|
|
}
|
|
|
|
|
2011-04-07 03:54:20 +00:00
|
|
|
/*
|
|
|
|
* verify all user requested events exist and the samples
|
|
|
|
* have the expected data
|
|
|
|
*/
|
|
|
|
static int perf_session__check_output_opt(struct perf_session *session)
|
|
|
|
{
|
2016-05-16 04:51:19 +00:00
|
|
|
unsigned int j;
|
2011-04-07 03:54:20 +00:00
|
|
|
struct perf_evsel *evsel;
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
for (j = 0; j < OUTPUT_TYPE_MAX; ++j) {
|
|
|
|
evsel = perf_session__find_first_evtype(session, attr_type(j));
|
2011-04-07 03:54:20 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* even if fields is set to 0 (ie., show nothing) event must
|
|
|
|
* exist if user explicitly includes it on the command line
|
|
|
|
*/
|
2017-06-21 10:17:19 +00:00
|
|
|
if (!evsel && output[j].user_set && !output[j].wildcard_set &&
|
|
|
|
j != OUTPUT_TYPE_SYNTH) {
|
2011-04-07 03:54:20 +00:00
|
|
|
pr_err("%s events do not exist. "
|
2017-05-26 08:17:20 +00:00
|
|
|
"Remove corresponding -F option to proceed.\n",
|
2011-04-07 03:54:20 +00:00
|
|
|
event_type(j));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (evsel && output[j].fields &&
|
|
|
|
perf_evsel__check_attr(evsel, session))
|
|
|
|
return -1;
|
2013-08-08 02:50:51 +00:00
|
|
|
|
|
|
|
if (evsel == NULL)
|
|
|
|
continue;
|
|
|
|
|
2013-11-01 13:51:30 +00:00
|
|
|
set_print_ip_opts(&evsel->attr);
|
2011-03-10 05:23:28 +00:00
|
|
|
}
|
|
|
|
|
2014-07-31 06:00:59 +00:00
|
|
|
if (!no_callchain) {
|
|
|
|
bool use_callchain = false;
|
2016-08-04 11:25:43 +00:00
|
|
|
bool not_pipe = false;
|
2014-07-31 06:00:59 +00:00
|
|
|
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(session->evlist, evsel) {
|
2016-08-04 11:25:43 +00:00
|
|
|
not_pipe = true;
|
2014-07-31 06:00:59 +00:00
|
|
|
if (evsel->attr.sample_type & PERF_SAMPLE_CALLCHAIN) {
|
|
|
|
use_callchain = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2016-08-04 11:25:43 +00:00
|
|
|
if (not_pipe && !use_callchain)
|
2014-07-31 06:00:59 +00:00
|
|
|
symbol_conf.use_callchain = false;
|
|
|
|
}
|
|
|
|
|
2013-11-20 04:07:37 +00:00
|
|
|
/*
|
|
|
|
* set default for tracepoints to print symbols only
|
|
|
|
* if callchains are present
|
|
|
|
*/
|
|
|
|
if (symbol_conf.use_callchain &&
|
|
|
|
!output[PERF_TYPE_TRACEPOINT].user_set) {
|
|
|
|
struct perf_event_attr *attr;
|
|
|
|
|
|
|
|
j = PERF_TYPE_TRACEPOINT;
|
|
|
|
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(session->evlist, evsel) {
|
2016-05-16 04:51:19 +00:00
|
|
|
if (evsel->attr.type != j)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
attr = &evsel->attr;
|
2013-11-20 04:07:37 +00:00
|
|
|
|
2016-05-16 04:51:19 +00:00
|
|
|
if (attr->sample_type & PERF_SAMPLE_CALLCHAIN) {
|
|
|
|
output[j].fields |= PERF_OUTPUT_IP;
|
|
|
|
output[j].fields |= PERF_OUTPUT_SYM;
|
|
|
|
output[j].fields |= PERF_OUTPUT_DSO;
|
|
|
|
set_print_ip_opts(attr);
|
|
|
|
goto out;
|
|
|
|
}
|
2013-11-20 04:07:37 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
2011-03-10 05:23:28 +00:00
|
|
|
return 0;
|
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_iregs(struct perf_sample *sample,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2015-08-31 16:41:10 +00:00
|
|
|
{
|
|
|
|
struct regs_dump *regs = &sample->intr_regs;
|
|
|
|
uint64_t mask = attr->sample_regs_intr;
|
|
|
|
unsigned i = 0, r;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
2015-08-31 16:41:10 +00:00
|
|
|
|
|
|
|
if (!regs)
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2015-08-31 16:41:10 +00:00
|
|
|
|
|
|
|
for_each_set_bit(r, (unsigned long *) &mask, sizeof(mask) * 8) {
|
|
|
|
u64 val = regs->regs[i++];
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5s:0x%"PRIx64" ", perf_reg_name(r), val);
|
2015-08-31 16:41:10 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2015-08-31 16:41:10 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_uregs(struct perf_sample *sample,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2017-09-05 18:40:57 +00:00
|
|
|
{
|
|
|
|
struct regs_dump *regs = &sample->user_regs;
|
|
|
|
uint64_t mask = attr->sample_regs_user;
|
|
|
|
unsigned i = 0, r;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
2017-09-05 18:40:57 +00:00
|
|
|
|
|
|
|
if (!regs || !regs->regs)
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-09-05 18:40:57 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " ABI:%" PRIu64 " ", regs->abi);
|
2017-09-05 18:40:57 +00:00
|
|
|
|
|
|
|
for_each_set_bit(r, (unsigned long *) &mask, sizeof(mask) * 8) {
|
|
|
|
u64 val = regs->regs[i++];
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5s:0x%"PRIx64" ", perf_reg_name(r), val);
|
2017-09-05 18:40:57 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2017-09-05 18:40:57 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_start(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
2018-01-07 16:03:52 +00:00
|
|
|
struct perf_evsel *evsel,
|
|
|
|
u32 type, FILE *fp)
|
2011-03-10 05:23:25 +00:00
|
|
|
{
|
2012-06-12 16:35:44 +00:00
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
2011-03-10 05:23:25 +00:00
|
|
|
unsigned long secs;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
unsigned long long nsecs;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(COMM)) {
|
|
|
|
if (latency_format)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%8.8s ", thread__comm_str(thread));
|
2011-05-27 20:28:43 +00:00
|
|
|
else if (PRINT_FIELD(IP) && symbol_conf.use_callchain)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%s ", thread__comm_str(thread));
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
else
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%16s ", thread__comm_str(thread));
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
2011-03-10 05:23:25 +00:00
|
|
|
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
if (PRINT_FIELD(PID) && PRINT_FIELD(TID))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5d/%-5d ", sample->pid, sample->tid);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
else if (PRINT_FIELD(PID))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5d ", sample->pid);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
else if (PRINT_FIELD(TID))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5d ", sample->tid);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(CPU)) {
|
|
|
|
if (latency_format)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%3d ", sample->cpu);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
else
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "[%03d] ", sample->cpu);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
2011-03-10 05:23:25 +00:00
|
|
|
|
2018-01-07 16:03:52 +00:00
|
|
|
if (PRINT_FIELD(MISC)) {
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
#define has(m) \
|
|
|
|
(sample->misc & PERF_RECORD_MISC_##m) == PERF_RECORD_MISC_##m
|
|
|
|
|
|
|
|
if (has(KERNEL))
|
|
|
|
ret += fprintf(fp, "K");
|
|
|
|
if (has(USER))
|
|
|
|
ret += fprintf(fp, "U");
|
|
|
|
if (has(HYPERVISOR))
|
|
|
|
ret += fprintf(fp, "H");
|
|
|
|
if (has(GUEST_KERNEL))
|
|
|
|
ret += fprintf(fp, "G");
|
|
|
|
if (has(GUEST_USER))
|
|
|
|
ret += fprintf(fp, "g");
|
|
|
|
|
|
|
|
switch (type) {
|
|
|
|
case PERF_RECORD_MMAP:
|
|
|
|
case PERF_RECORD_MMAP2:
|
|
|
|
if (has(MMAP_DATA))
|
|
|
|
ret += fprintf(fp, "M");
|
|
|
|
break;
|
|
|
|
case PERF_RECORD_COMM:
|
|
|
|
if (has(COMM_EXEC))
|
|
|
|
ret += fprintf(fp, "E");
|
|
|
|
break;
|
|
|
|
case PERF_RECORD_SWITCH:
|
|
|
|
case PERF_RECORD_SWITCH_CPU_WIDE:
|
2018-04-09 07:26:46 +00:00
|
|
|
if (has(SWITCH_OUT)) {
|
2018-01-07 16:03:52 +00:00
|
|
|
ret += fprintf(fp, "S");
|
2018-04-09 07:26:46 +00:00
|
|
|
if (sample->misc & PERF_RECORD_MISC_SWITCH_OUT_PREEMPT)
|
|
|
|
ret += fprintf(fp, "p");
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
#undef has
|
|
|
|
|
|
|
|
ret += fprintf(fp, "%*s", 6 - ret, " ");
|
|
|
|
printed += ret;
|
|
|
|
}
|
|
|
|
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
if (PRINT_FIELD(TIME)) {
|
|
|
|
nsecs = sample->time;
|
2016-08-05 18:40:30 +00:00
|
|
|
secs = nsecs / NSEC_PER_SEC;
|
|
|
|
nsecs -= secs * NSEC_PER_SEC;
|
perf tools: Introduce timestamp__scnprintf_usec()
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 02:02:45 +00:00
|
|
|
|
2015-09-25 13:15:36 +00:00
|
|
|
if (nanosecs)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%5lu.%09llu: ", secs, nsecs);
|
perf tools: Introduce timestamp__scnprintf_usec()
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 02:02:45 +00:00
|
|
|
else {
|
|
|
|
char sample_time[32];
|
|
|
|
timestamp__scnprintf_usec(sample->time, sample_time, sizeof(sample_time));
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%12s: ", sample_time);
|
perf tools: Introduce timestamp__scnprintf_usec()
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 02:02:45 +00:00
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2011-03-10 05:23:25 +00:00
|
|
|
}
|
|
|
|
|
2015-08-31 16:41:13 +00:00
|
|
|
static inline char
|
|
|
|
mispred_str(struct branch_entry *br)
|
|
|
|
{
|
|
|
|
if (!(br->flags.mispred || br->flags.predicted))
|
|
|
|
return '-';
|
|
|
|
|
|
|
|
return br->flags.predicted ? 'P' : 'M';
|
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_brstack(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2015-08-31 16:41:13 +00:00
|
|
|
{
|
|
|
|
struct branch_stack *br = sample->branch_stack;
|
2017-06-19 16:38:24 +00:00
|
|
|
struct addr_location alf, alt;
|
|
|
|
u64 i, from, to;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
2015-08-31 16:41:13 +00:00
|
|
|
|
|
|
|
if (!(br && br->nr))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2015-08-31 16:41:13 +00:00
|
|
|
|
|
|
|
for (i = 0; i < br->nr; i++) {
|
2017-06-19 16:38:24 +00:00
|
|
|
from = br->entries[i].from;
|
|
|
|
to = br->entries[i].to;
|
|
|
|
|
|
|
|
if (PRINT_FIELD(DSO)) {
|
|
|
|
memset(&alf, 0, sizeof(alf));
|
|
|
|
memset(&alt, 0, sizeof(alt));
|
2018-04-24 13:49:50 +00:00
|
|
|
thread__find_map(thread, sample->cpumode, from, &alf);
|
|
|
|
thread__find_map(thread, sample->cpumode, to, &alt);
|
2017-06-19 16:38:24 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " 0x%"PRIx64, from);
|
2017-06-19 16:38:24 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alf.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
2017-06-19 16:38:24 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "/0x%"PRIx64, to);
|
2017-06-19 16:38:24 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alt.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
2017-06-19 16:38:24 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "/%c/%c/%c/%d ",
|
2015-08-31 16:41:13 +00:00
|
|
|
mispred_str( br->entries + i),
|
|
|
|
br->entries[i].flags.in_tx? 'X' : '-',
|
|
|
|
br->entries[i].flags.abort? 'A' : '-',
|
|
|
|
br->entries[i].flags.cycles);
|
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2015-08-31 16:41:13 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_brstacksym(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2015-08-31 16:41:13 +00:00
|
|
|
{
|
|
|
|
struct branch_stack *br = sample->branch_stack;
|
|
|
|
struct addr_location alf, alt;
|
|
|
|
u64 i, from, to;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
2015-08-31 16:41:13 +00:00
|
|
|
|
|
|
|
if (!(br && br->nr))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2015-08-31 16:41:13 +00:00
|
|
|
|
|
|
|
for (i = 0; i < br->nr; i++) {
|
|
|
|
|
|
|
|
memset(&alf, 0, sizeof(alf));
|
|
|
|
memset(&alt, 0, sizeof(alt));
|
|
|
|
from = br->entries[i].from;
|
|
|
|
to = br->entries[i].to;
|
|
|
|
|
2018-04-24 14:32:30 +00:00
|
|
|
thread__find_symbol(thread, sample->cpumode, from, &alf);
|
|
|
|
thread__find_symbol(thread, sample->cpumode, to, &alt);
|
2015-08-31 16:41:13 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += symbol__fprintf_symname_offs(alf.sym, &alf, fp);
|
2017-06-19 16:38:24 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alf.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
2017-06-19 16:38:24 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%c", '/');
|
|
|
|
printed += symbol__fprintf_symname_offs(alt.sym, &alt, fp);
|
2017-06-19 16:38:24 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alt.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
2017-06-19 16:38:24 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "/%c/%c/%c/%d ",
|
2015-08-31 16:41:13 +00:00
|
|
|
mispred_str( br->entries + i),
|
|
|
|
br->entries[i].flags.in_tx? 'X' : '-',
|
|
|
|
br->entries[i].flags.abort? 'A' : '-',
|
|
|
|
br->entries[i].flags.cycles);
|
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2015-08-31 16:41:13 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_brstackoff(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
{
|
|
|
|
struct branch_stack *br = sample->branch_stack;
|
|
|
|
struct addr_location alf, alt;
|
|
|
|
u64 i, from, to;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
|
|
|
|
if (!(br && br->nr))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
|
|
|
|
for (i = 0; i < br->nr; i++) {
|
|
|
|
|
|
|
|
memset(&alf, 0, sizeof(alf));
|
|
|
|
memset(&alt, 0, sizeof(alt));
|
|
|
|
from = br->entries[i].from;
|
|
|
|
to = br->entries[i].to;
|
|
|
|
|
2018-04-24 14:58:56 +00:00
|
|
|
if (thread__find_map(thread, sample->cpumode, from, &alf) &&
|
|
|
|
!alf.map->dso->adjust_symbols)
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
from = map__map_ip(alf.map, from);
|
|
|
|
|
2018-04-24 14:58:56 +00:00
|
|
|
if (thread__find_map(thread, sample->cpumode, to, &alt) &&
|
|
|
|
!alt.map->dso->adjust_symbols)
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
to = map__map_ip(alt.map, to);
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " 0x%"PRIx64, from);
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alf.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "/0x%"PRIx64, to);
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "(");
|
|
|
|
printed += map__fprintf_dsoname(alt.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "/%c/%c/%c/%d ",
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
mispred_str(br->entries + i),
|
|
|
|
br->entries[i].flags.in_tx ? 'X' : '-',
|
|
|
|
br->entries[i].flags.abort ? 'A' : '-',
|
|
|
|
br->entries[i].flags.cycles);
|
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
}
|
2017-02-23 23:46:34 +00:00
|
|
|
#define MAXBB 16384UL
|
|
|
|
|
|
|
|
static int grab_bb(u8 *buffer, u64 start, u64 end,
|
|
|
|
struct machine *machine, struct thread *thread,
|
|
|
|
bool *is64bit, u8 *cpumode, bool last)
|
|
|
|
{
|
|
|
|
long offset, len;
|
|
|
|
struct addr_location al;
|
|
|
|
bool kernel;
|
|
|
|
|
|
|
|
if (!start || !end)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
kernel = machine__kernel_ip(machine, start);
|
|
|
|
if (kernel)
|
|
|
|
*cpumode = PERF_RECORD_MISC_KERNEL;
|
|
|
|
else
|
|
|
|
*cpumode = PERF_RECORD_MISC_USER;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Block overlaps between kernel and user.
|
|
|
|
* This can happen due to ring filtering
|
|
|
|
* On Intel CPUs the entry into the kernel is filtered,
|
|
|
|
* but the exit is not. Let the caller patch it up.
|
|
|
|
*/
|
|
|
|
if (kernel != machine__kernel_ip(machine, end)) {
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tblock %" PRIx64 "-%" PRIx64 " transfers between kernel and user\n", start, end);
|
2017-02-23 23:46:34 +00:00
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(&al, 0, sizeof(al));
|
|
|
|
if (end - start > MAXBB - MAXINSN) {
|
|
|
|
if (last)
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tbrstack does not reach to final jump (%" PRIx64 "-%" PRIx64 ")\n", start, end);
|
2017-02-23 23:46:34 +00:00
|
|
|
else
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tblock %" PRIx64 "-%" PRIx64 " (%" PRIu64 ") too long to dump\n", start, end, end - start);
|
2017-02-23 23:46:34 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-04-24 14:58:56 +00:00
|
|
|
if (!thread__find_map(thread, *cpumode, start, &al) || !al.map->dso) {
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tcannot resolve %" PRIx64 "-%" PRIx64 "\n", start, end);
|
2017-02-23 23:46:34 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (al.map->dso->data.status == DSO_DATA_STATUS_ERROR) {
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tcannot resolve %" PRIx64 "-%" PRIx64 "\n", start, end);
|
2017-02-23 23:46:34 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Load maps to ensure dso->is_64_bit has been updated */
|
|
|
|
map__load(al.map);
|
|
|
|
|
|
|
|
offset = al.map->map_ip(al.map, start);
|
|
|
|
len = dso__data_read_offset(al.map->dso, machine, offset, (u8 *)buffer,
|
|
|
|
end - start + MAXINSN);
|
|
|
|
|
|
|
|
*is64bit = al.map->dso->is_64_bit;
|
|
|
|
if (len <= 0)
|
2017-10-26 12:55:22 +00:00
|
|
|
pr_debug("\tcannot fetch code for block at %" PRIx64 "-%" PRIx64 "\n",
|
2017-02-23 23:46:34 +00:00
|
|
|
start, end);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int ip__fprintf_jump(uint64_t ip, struct branch_entry *en,
|
|
|
|
struct perf_insn *x, u8 *inbuf, int len,
|
|
|
|
int insn, FILE *fp)
|
2017-02-23 23:46:34 +00:00
|
|
|
{
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = fprintf(fp, "\t%016" PRIx64 "\t%-30s\t#%s%s%s%s", ip,
|
|
|
|
dump_insn(x, ip, inbuf, len, NULL),
|
|
|
|
en->flags.predicted ? " PRED" : "",
|
|
|
|
en->flags.mispred ? " MISPRED" : "",
|
|
|
|
en->flags.in_tx ? " INTX" : "",
|
|
|
|
en->flags.abort ? " ABORT" : "");
|
2017-02-23 23:46:34 +00:00
|
|
|
if (en->flags.cycles) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " %d cycles", en->flags.cycles);
|
2017-02-23 23:46:34 +00:00
|
|
|
if (insn)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " %.2f IPC", (float)insn / en->flags.cycles);
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
return printed + fprintf(fp, "\n");
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int ip__fprintf_sym(uint64_t addr, struct thread *thread,
|
|
|
|
u8 cpumode, int cpu, struct symbol **lastsym,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2017-02-23 23:46:34 +00:00
|
|
|
{
|
|
|
|
struct addr_location al;
|
2017-10-17 13:54:24 +00:00
|
|
|
int off, printed = 0;
|
2017-02-23 23:46:34 +00:00
|
|
|
|
|
|
|
memset(&al, 0, sizeof(al));
|
|
|
|
|
2018-04-26 12:34:37 +00:00
|
|
|
thread__find_map(thread, cpumode, addr, &al);
|
|
|
|
|
2017-02-23 23:46:34 +00:00
|
|
|
if ((*lastsym) && al.addr >= (*lastsym)->start && al.addr < (*lastsym)->end)
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-02-23 23:46:34 +00:00
|
|
|
|
|
|
|
al.cpu = cpu;
|
|
|
|
al.sym = NULL;
|
|
|
|
if (al.map)
|
|
|
|
al.sym = map__find_symbol(al.map, al.addr);
|
|
|
|
|
|
|
|
if (!al.sym)
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-02-23 23:46:34 +00:00
|
|
|
|
|
|
|
if (al.addr < al.sym->end)
|
|
|
|
off = al.addr - al.sym->start;
|
|
|
|
else
|
|
|
|
off = al.addr - al.map->start - al.sym->start;
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "\t%s", al.sym->name);
|
2017-02-23 23:46:34 +00:00
|
|
|
if (off)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%+d", off);
|
|
|
|
printed += fprintf(fp, ":");
|
2017-02-23 23:46:34 +00:00
|
|
|
if (PRINT_FIELD(SRCLINE))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += map__fprintf_srcline(al.map, al.addr, "\t", fp);
|
|
|
|
printed += fprintf(fp, "\n");
|
2017-02-23 23:46:34 +00:00
|
|
|
*lastsym = al.sym;
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return printed;
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_brstackinsn(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_event_attr *attr,
|
|
|
|
struct machine *machine, FILE *fp)
|
2017-02-23 23:46:34 +00:00
|
|
|
{
|
|
|
|
struct branch_stack *br = sample->branch_stack;
|
|
|
|
u64 start, end;
|
2017-10-17 13:54:24 +00:00
|
|
|
int i, insn, len, nr, ilen, printed = 0;
|
2017-02-23 23:46:34 +00:00
|
|
|
struct perf_insn x;
|
|
|
|
u8 buffer[MAXBB];
|
|
|
|
unsigned off;
|
|
|
|
struct symbol *lastsym = NULL;
|
|
|
|
|
|
|
|
if (!(br && br->nr))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-02-23 23:46:34 +00:00
|
|
|
nr = br->nr;
|
|
|
|
if (max_blocks && nr > max_blocks + 1)
|
|
|
|
nr = max_blocks + 1;
|
|
|
|
|
|
|
|
x.thread = thread;
|
|
|
|
x.cpu = sample->cpu;
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%c", '\n');
|
2017-02-23 23:46:34 +00:00
|
|
|
|
|
|
|
/* Handle first from jump, of which we don't know the entry. */
|
|
|
|
len = grab_bb(buffer, br->entries[nr-1].from,
|
|
|
|
br->entries[nr-1].from,
|
|
|
|
machine, thread, &x.is64bit, &x.cpumode, false);
|
|
|
|
if (len > 0) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += ip__fprintf_sym(br->entries[nr - 1].from, thread,
|
|
|
|
x.cpumode, x.cpu, &lastsym, attr, fp);
|
|
|
|
printed += ip__fprintf_jump(br->entries[nr - 1].from, &br->entries[nr - 1],
|
|
|
|
&x, buffer, len, 0, fp);
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Print all blocks */
|
|
|
|
for (i = nr - 2; i >= 0; i--) {
|
|
|
|
if (br->entries[i].from || br->entries[i].to)
|
|
|
|
pr_debug("%d: %" PRIx64 "-%" PRIx64 "\n", i,
|
|
|
|
br->entries[i].from,
|
|
|
|
br->entries[i].to);
|
|
|
|
start = br->entries[i + 1].to;
|
|
|
|
end = br->entries[i].from;
|
|
|
|
|
|
|
|
len = grab_bb(buffer, start, end, machine, thread, &x.is64bit, &x.cpumode, false);
|
|
|
|
/* Patch up missing kernel transfers due to ring filters */
|
|
|
|
if (len == -ENXIO && i > 0) {
|
|
|
|
end = br->entries[--i].from;
|
|
|
|
pr_debug("\tpatching up to %" PRIx64 "-%" PRIx64 "\n", start, end);
|
|
|
|
len = grab_bb(buffer, start, end, machine, thread, &x.is64bit, &x.cpumode, false);
|
|
|
|
}
|
|
|
|
if (len <= 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
insn = 0;
|
|
|
|
for (off = 0;; off += ilen) {
|
|
|
|
uint64_t ip = start + off;
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += ip__fprintf_sym(ip, thread, x.cpumode, x.cpu, &lastsym, attr, fp);
|
2017-02-23 23:46:34 +00:00
|
|
|
if (ip == end) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += ip__fprintf_jump(ip, &br->entries[i], &x, buffer + off, len - off, insn, fp);
|
2017-02-23 23:46:34 +00:00
|
|
|
break;
|
|
|
|
} else {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "\t%016" PRIx64 "\t%s\n", ip,
|
|
|
|
dump_insn(&x, ip, buffer + off, len - off, &ilen));
|
2017-02-23 23:46:34 +00:00
|
|
|
if (ilen == 0)
|
|
|
|
break;
|
|
|
|
insn++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Hit the branch? In this case we are already done, and the target
|
|
|
|
* has not been executed yet.
|
|
|
|
*/
|
|
|
|
if (br->entries[0].from == sample->ip)
|
2017-10-17 13:54:24 +00:00
|
|
|
goto out;
|
2017-02-23 23:46:34 +00:00
|
|
|
if (br->entries[0].flags.abort)
|
2017-10-17 13:54:24 +00:00
|
|
|
goto out;
|
2017-02-23 23:46:34 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Print final block upto sample
|
|
|
|
*/
|
|
|
|
start = br->entries[0].to;
|
|
|
|
end = sample->ip;
|
|
|
|
len = grab_bb(buffer, start, end, machine, thread, &x.is64bit, &x.cpumode, true);
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += ip__fprintf_sym(start, thread, x.cpumode, x.cpu, &lastsym, attr, fp);
|
2017-02-23 23:46:34 +00:00
|
|
|
if (len <= 0) {
|
|
|
|
/* Print at least last IP if basic block did not work */
|
|
|
|
len = grab_bb(buffer, sample->ip, sample->ip,
|
|
|
|
machine, thread, &x.is64bit, &x.cpumode, false);
|
|
|
|
if (len <= 0)
|
2017-10-17 13:54:24 +00:00
|
|
|
goto out;
|
2017-02-23 23:46:34 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "\t%016" PRIx64 "\t%s\n", sample->ip,
|
2017-02-23 23:46:34 +00:00
|
|
|
dump_insn(&x, sample->ip, buffer, len, NULL));
|
2017-10-17 13:54:24 +00:00
|
|
|
goto out;
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
|
|
|
for (off = 0; off <= end - start; off += ilen) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "\t%016" PRIx64 "\t%s\n", start + off,
|
|
|
|
dump_insn(&x, start + off, buffer + off, len - off, &ilen));
|
2017-02-23 23:46:34 +00:00
|
|
|
if (ilen == 0)
|
|
|
|
break;
|
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
out:
|
|
|
|
return printed;
|
2017-02-23 23:46:34 +00:00
|
|
|
}
|
2015-08-31 16:41:13 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_addr(struct perf_sample *sample,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_event_attr *attr, FILE *fp)
|
2011-05-30 19:08:23 +00:00
|
|
|
{
|
|
|
|
struct addr_location al;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = fprintf(fp, "%16" PRIx64, sample->addr);
|
2011-05-30 19:08:23 +00:00
|
|
|
|
|
|
|
if (!sample_addr_correlates_sym(attr))
|
2017-10-17 13:54:24 +00:00
|
|
|
goto out;
|
2011-05-30 19:08:23 +00:00
|
|
|
|
2016-03-22 21:44:46 +00:00
|
|
|
thread__resolve(thread, &al, sample);
|
2011-05-30 19:08:23 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(SYM)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " ");
|
2012-01-30 04:43:15 +00:00
|
|
|
if (PRINT_FIELD(SYMOFFSET))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += symbol__fprintf_symname_offs(al.sym, &al, fp);
|
2012-01-30 04:43:15 +00:00
|
|
|
else
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += symbol__fprintf_symname(al.sym, fp);
|
2011-05-30 19:08:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (PRINT_FIELD(DSO)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " (");
|
|
|
|
printed += map__fprintf_dsoname(al.map, fp);
|
|
|
|
printed += fprintf(fp, ")");
|
2011-05-30 19:08:23 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
out:
|
|
|
|
return printed;
|
2011-05-30 19:08:23 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_callindent(struct perf_sample *sample,
|
|
|
|
struct perf_evsel *evsel,
|
|
|
|
struct thread *thread,
|
|
|
|
struct addr_location *al, FILE *fp)
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
{
|
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
|
|
|
size_t depth = thread_stack__depth(thread);
|
|
|
|
struct addr_location addr_al;
|
|
|
|
const char *name = NULL;
|
|
|
|
static int spacing;
|
|
|
|
int len = 0;
|
|
|
|
u64 ip = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The 'return' has already been popped off the stack so the depth has
|
|
|
|
* to be adjusted to match the 'call'.
|
|
|
|
*/
|
|
|
|
if (thread->ts && sample->flags & PERF_IP_FLAG_RETURN)
|
|
|
|
depth += 1;
|
|
|
|
|
|
|
|
if (sample->flags & (PERF_IP_FLAG_CALL | PERF_IP_FLAG_TRACE_BEGIN)) {
|
|
|
|
if (sample_addr_correlates_sym(attr)) {
|
|
|
|
thread__resolve(thread, &addr_al, sample);
|
|
|
|
if (addr_al.sym)
|
|
|
|
name = addr_al.sym->name;
|
|
|
|
else
|
|
|
|
ip = sample->addr;
|
|
|
|
} else {
|
|
|
|
ip = sample->addr;
|
|
|
|
}
|
|
|
|
} else if (sample->flags & (PERF_IP_FLAG_RETURN | PERF_IP_FLAG_TRACE_END)) {
|
|
|
|
if (al->sym)
|
|
|
|
name = al->sym->name;
|
|
|
|
else
|
|
|
|
ip = sample->ip;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (name)
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, "%*s%s", (int)depth * 4, "", name);
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
else if (ip)
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, "%*s%16" PRIx64, (int)depth * 4, "", ip);
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
|
|
|
|
if (len < 0)
|
2017-10-17 13:54:24 +00:00
|
|
|
return len;
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to keep the output length from changing frequently so that the
|
|
|
|
* output lines up more nicely.
|
|
|
|
*/
|
|
|
|
if (len > spacing || (len && len < spacing - 52))
|
|
|
|
spacing = round_up(len + 4, 32);
|
|
|
|
|
|
|
|
if (len < spacing)
|
2017-10-17 13:54:24 +00:00
|
|
|
len += fprintf(fp, "%*s", spacing - len, "");
|
|
|
|
|
|
|
|
return len;
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_insn(struct perf_sample *sample,
|
|
|
|
struct perf_event_attr *attr,
|
|
|
|
struct thread *thread,
|
|
|
|
struct machine *machine, FILE *fp)
|
2016-10-07 13:42:27 +00:00
|
|
|
{
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
|
|
|
|
2016-10-07 13:42:27 +00:00
|
|
|
if (PRINT_FIELD(INSNLEN))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " ilen: %d", sample->insn_len);
|
2016-10-07 13:42:27 +00:00
|
|
|
if (PRINT_FIELD(INSN)) {
|
|
|
|
int i;
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " insn:");
|
2016-10-07 13:42:27 +00:00
|
|
|
for (i = 0; i < sample->insn_len; i++)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " %02x", (unsigned char)sample->insn[i]);
|
2016-10-07 13:42:27 +00:00
|
|
|
}
|
2017-02-23 23:46:34 +00:00
|
|
|
if (PRINT_FIELD(BRSTACKINSN))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += perf_sample__fprintf_brstackinsn(sample, thread, attr, machine, fp);
|
|
|
|
|
|
|
|
return printed;
|
2016-10-07 13:42:27 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_bts(struct perf_sample *sample,
|
|
|
|
struct perf_evsel *evsel,
|
|
|
|
struct thread *thread,
|
|
|
|
struct addr_location *al,
|
|
|
|
struct machine *machine, FILE *fp)
|
2012-01-30 04:43:09 +00:00
|
|
|
{
|
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
2017-06-21 10:17:19 +00:00
|
|
|
unsigned int type = output_type(attr->type);
|
2014-07-22 13:17:15 +00:00
|
|
|
bool print_srcline_last = false;
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = 0;
|
2012-01-30 04:43:09 +00:00
|
|
|
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
if (PRINT_FIELD(CALLINDENT))
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += perf_sample__fprintf_callindent(sample, evsel, thread, al, fp);
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
|
2012-01-30 04:43:09 +00:00
|
|
|
/* print branch_from information */
|
|
|
|
if (PRINT_FIELD(IP)) {
|
2017-06-21 10:17:19 +00:00
|
|
|
unsigned int print_opts = output[type].print_ip_opts;
|
2016-04-20 02:32:11 +00:00
|
|
|
struct callchain_cursor *cursor = NULL;
|
2014-07-22 13:17:15 +00:00
|
|
|
|
2016-04-14 20:45:51 +00:00
|
|
|
if (symbol_conf.use_callchain && sample->callchain &&
|
2016-04-20 02:32:11 +00:00
|
|
|
thread__resolve_callchain(al->thread, &callchain_cursor, evsel,
|
2016-04-14 20:45:51 +00:00
|
|
|
sample, NULL, NULL, scripting_max_stack) == 0)
|
2016-04-20 02:32:11 +00:00
|
|
|
cursor = &callchain_cursor;
|
2016-04-14 20:45:51 +00:00
|
|
|
|
|
|
|
if (cursor == NULL) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " ");
|
2016-04-12 18:16:15 +00:00
|
|
|
if (print_opts & EVSEL__PRINT_SRCLINE) {
|
2014-07-22 13:17:15 +00:00
|
|
|
print_srcline_last = true;
|
2016-04-12 18:16:15 +00:00
|
|
|
print_opts &= ~EVSEL__PRINT_SRCLINE;
|
2014-07-22 13:17:15 +00:00
|
|
|
}
|
2016-04-14 20:45:51 +00:00
|
|
|
} else
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "\n");
|
2016-04-14 20:45:51 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += sample__fprintf_sym(sample, al, 0, print_opts, cursor, fp);
|
2012-01-30 04:43:09 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* print branch_to information */
|
2013-10-18 12:29:14 +00:00
|
|
|
if (PRINT_FIELD(ADDR) ||
|
|
|
|
((evsel->attr.sample_type & PERF_SAMPLE_ADDR) &&
|
2017-06-21 10:17:19 +00:00
|
|
|
!output[type].user_set)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, " => ");
|
|
|
|
printed += perf_sample__fprintf_addr(sample, thread, attr, fp);
|
2014-07-22 13:17:16 +00:00
|
|
|
}
|
2012-01-30 04:43:09 +00:00
|
|
|
|
2014-07-22 13:17:15 +00:00
|
|
|
if (print_srcline_last)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += map__fprintf_srcline(al->map, al->addr, "\n ", fp);
|
2016-10-07 13:42:27 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += perf_sample__fprintf_insn(sample, attr, thread, machine, fp);
|
|
|
|
return printed + fprintf(fp, "\n");
|
2012-01-30 04:43:09 +00:00
|
|
|
}
|
|
|
|
|
perf script: Print sample flags more nicely
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.
Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".
However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.
Example:
perf record -e intel_pt//u ls
perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
...
ls 3689/3689 [001] 2062.020965237: jcc 7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: call 7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: syscall 7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) => 0 [unknown] ([unknown])
ls 3689/3689 [001] 2062.020966237: tr strt 0 [unknown] ([unknown]) => 7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: return 7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: call 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:56 +00:00
|
|
|
static struct {
|
|
|
|
u32 flags;
|
|
|
|
const char *name;
|
|
|
|
} sample_flags[] = {
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL, "call"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN, "return"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CONDITIONAL, "jcc"},
|
|
|
|
{PERF_IP_FLAG_BRANCH, "jmp"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_INTERRUPT, "int"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN | PERF_IP_FLAG_INTERRUPT, "iret"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_SYSCALLRET, "syscall"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN | PERF_IP_FLAG_SYSCALLRET, "sysret"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_ASYNC, "async"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_ASYNC | PERF_IP_FLAG_INTERRUPT, "hw int"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TX_ABORT, "tx abrt"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TRACE_BEGIN, "tr strt"},
|
|
|
|
{PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TRACE_END, "tr end"},
|
|
|
|
{0, NULL}
|
|
|
|
};
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_flags(u32 flags, FILE *fp)
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
{
|
|
|
|
const char *chars = PERF_IP_FLAG_CHARS;
|
|
|
|
const int n = strlen(PERF_IP_FLAG_CHARS);
|
perf script: Print sample flags more nicely
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.
Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".
However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.
Example:
perf record -e intel_pt//u ls
perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
...
ls 3689/3689 [001] 2062.020965237: jcc 7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: call 7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: syscall 7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) => 0 [unknown] ([unknown])
ls 3689/3689 [001] 2062.020966237: tr strt 0 [unknown] ([unknown]) => 7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: return 7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: call 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:56 +00:00
|
|
|
bool in_tx = flags & PERF_IP_FLAG_IN_TX;
|
|
|
|
const char *name = NULL;
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
char str[33];
|
|
|
|
int i, pos = 0;
|
|
|
|
|
perf script: Print sample flags more nicely
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.
Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".
However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.
Example:
perf record -e intel_pt//u ls
perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
...
ls 3689/3689 [001] 2062.020965237: jcc 7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: call 7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: syscall 7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) => 0 [unknown] ([unknown])
ls 3689/3689 [001] 2062.020966237: tr strt 0 [unknown] ([unknown]) => 7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: return 7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: call 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:56 +00:00
|
|
|
for (i = 0; sample_flags[i].name ; i++) {
|
|
|
|
if (sample_flags[i].flags == (flags & ~PERF_IP_FLAG_IN_TX)) {
|
|
|
|
name = sample_flags[i].name;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
for (i = 0; i < n; i++, flags >>= 1) {
|
|
|
|
if (flags & 1)
|
|
|
|
str[pos++] = chars[i];
|
|
|
|
}
|
|
|
|
for (; i < 32; i++, flags >>= 1) {
|
|
|
|
if (flags & 1)
|
|
|
|
str[pos++] = '?';
|
|
|
|
}
|
|
|
|
str[pos] = 0;
|
perf script: Print sample flags more nicely
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.
Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".
However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.
Example:
perf record -e intel_pt//u ls
perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
...
ls 3689/3689 [001] 2062.020965237: jcc 7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965237: jmp 7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: call 7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020965904: syscall 7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) => 0 [unknown] ([unknown])
ls 3689/3689 [001] 2062.020966237: tr strt 0 [unknown] ([unknown]) => 7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: return 7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: call 7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
ls 3689/3689 [001] 2062.020966237: jcc 7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) => 7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:56 +00:00
|
|
|
|
|
|
|
if (name)
|
2017-10-17 13:54:24 +00:00
|
|
|
return fprintf(fp, " %-7s%4s ", name, in_tx ? "(x)" : "");
|
|
|
|
|
|
|
|
return fprintf(fp, " %-11s ", str);
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
}
|
|
|
|
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
struct printer_data {
|
|
|
|
int line_no;
|
|
|
|
bool hit_nul;
|
|
|
|
bool is_printable;
|
|
|
|
};
|
|
|
|
|
2017-10-17 13:35:00 +00:00
|
|
|
static int sample__fprintf_bpf_output(enum binary_printer_ops op,
|
|
|
|
unsigned int val,
|
|
|
|
void *extra, FILE *fp)
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
{
|
|
|
|
unsigned char ch = (unsigned char)val;
|
|
|
|
struct printer_data *printer_data = extra;
|
2017-10-17 13:35:00 +00:00
|
|
|
int printed = 0;
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
|
|
|
|
switch (op) {
|
|
|
|
case BINARY_PRINT_DATA_BEGIN:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, "\n");
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_LINE_BEGIN:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, "%17s", !printer_data->line_no ? "BPF output:" :
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
" ");
|
|
|
|
break;
|
|
|
|
case BINARY_PRINT_ADDR:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, " %04x:", val);
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_NUM_DATA:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, " %02x", val);
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_NUM_PAD:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, " ");
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_SEP:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, " ");
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_CHAR_DATA:
|
|
|
|
if (printer_data->hit_nul && ch)
|
|
|
|
printer_data->is_printable = false;
|
|
|
|
|
|
|
|
if (!isprint(ch)) {
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, "%c", '.');
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
|
|
|
|
if (!printer_data->is_printable)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (ch == '\0')
|
|
|
|
printer_data->hit_nul = true;
|
|
|
|
else
|
|
|
|
printer_data->is_printable = false;
|
|
|
|
} else {
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, "%c", ch);
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case BINARY_PRINT_CHAR_PAD:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, " ");
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
break;
|
|
|
|
case BINARY_PRINT_LINE_END:
|
2017-10-17 13:35:00 +00:00
|
|
|
printed += fprintf(fp, "\n");
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
printer_data->line_no++;
|
|
|
|
break;
|
|
|
|
case BINARY_PRINT_DATA_END:
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
2017-10-17 13:35:00 +00:00
|
|
|
|
|
|
|
return printed;
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_bpf_output(struct perf_sample *sample, FILE *fp)
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
{
|
|
|
|
unsigned int nr_bytes = sample->raw_size;
|
|
|
|
struct printer_data printer_data = {0, false, true};
|
2017-10-17 13:54:24 +00:00
|
|
|
int printed = binary__fprintf(sample->raw_data, nr_bytes, 8,
|
|
|
|
sample__fprintf_bpf_output, &printer_data, fp);
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
|
|
|
|
if (printer_data.is_printable && printer_data.hit_nul)
|
2017-10-17 13:54:24 +00:00
|
|
|
printed += fprintf(fp, "%17s \"%s\"\n", "BPF string:", (char *)(sample->raw_data));
|
|
|
|
|
|
|
|
return printed;
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_spacing(int len, int spacing, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
if (len > 0 && len < spacing)
|
2017-10-17 13:54:24 +00:00
|
|
|
return fprintf(fp, "%*s", spacing - len, "");
|
|
|
|
|
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_pt_spacing(int len, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_spacing(len, 34, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_ptwrite(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_ptwrite *data = perf_sample__synth_ptr(sample);
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " IP: %u payload: %#" PRIx64 " ",
|
2017-06-30 08:36:42 +00:00
|
|
|
data->ip, le64_to_cpu(data->payload));
|
2017-10-17 13:54:24 +00:00
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_mwait(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_mwait *data = perf_sample__synth_ptr(sample);
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " hints: %#x extensions: %#x ",
|
|
|
|
data->hints, data->extensions);
|
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_pwre(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_pwre *data = perf_sample__synth_ptr(sample);
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " hw: %u cstate: %u sub-cstate: %u ",
|
|
|
|
data->hw, data->cstate, data->subcstate);
|
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_exstop(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_exstop *data = perf_sample__synth_ptr(sample);
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " IP: %u ", data->ip);
|
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_pwrx(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_pwrx *data = perf_sample__synth_ptr(sample);
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " deepest cstate: %u last cstate: %u wake reason: %#x ",
|
2017-06-30 08:36:42 +00:00
|
|
|
data->deepest_cstate, data->last_cstate,
|
|
|
|
data->wake_reason);
|
2017-10-17 13:54:24 +00:00
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth_cbr(struct perf_sample *sample, FILE *fp)
|
2017-06-30 08:36:42 +00:00
|
|
|
{
|
|
|
|
struct perf_synth_intel_cbr *data = perf_sample__synth_ptr(sample);
|
|
|
|
unsigned int percent, freq;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (perf_sample__bad_synth_size(sample, *data))
|
2017-10-17 13:54:24 +00:00
|
|
|
return 0;
|
2017-06-30 08:36:42 +00:00
|
|
|
|
|
|
|
freq = (le32_to_cpu(data->freq) + 500) / 1000;
|
2017-10-17 13:54:24 +00:00
|
|
|
len = fprintf(fp, " cbr: %2u freq: %4u MHz ", data->cbr, freq);
|
2017-06-30 08:36:42 +00:00
|
|
|
if (data->max_nonturbo) {
|
|
|
|
percent = (5 + (1000 * data->cbr) / data->max_nonturbo) / 10;
|
2017-10-17 13:54:24 +00:00
|
|
|
len += fprintf(fp, "(%3u%%) ", percent);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
return len + perf_sample__fprintf_pt_spacing(len, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int perf_sample__fprintf_synth(struct perf_sample *sample,
|
|
|
|
struct perf_evsel *evsel, FILE *fp)
|
2017-05-26 08:17:22 +00:00
|
|
|
{
|
|
|
|
switch (evsel->attr.config) {
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_PTWRITE:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_ptwrite(sample, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_MWAIT:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_mwait(sample, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_PWRE:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_pwre(sample, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_EXSTOP:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_exstop(sample, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_PWRX:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_pwrx(sample, fp);
|
2017-06-30 08:36:42 +00:00
|
|
|
case PERF_SYNTH_INTEL_CBR:
|
2017-10-17 13:54:24 +00:00
|
|
|
return perf_sample__fprintf_synth_cbr(sample, fp);
|
2017-05-26 08:17:22 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
2017-10-17 13:54:24 +00:00
|
|
|
|
|
|
|
return 0;
|
2017-05-26 08:17:22 +00:00
|
|
|
}
|
|
|
|
|
2015-11-26 17:55:21 +00:00
|
|
|
struct perf_script {
|
|
|
|
struct perf_tool tool;
|
|
|
|
struct perf_session *session;
|
|
|
|
bool show_task_events;
|
|
|
|
bool show_mmap_events;
|
|
|
|
bool show_switch_events;
|
perf script: Add script print support for namespace events
Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.
Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.
$ perf script --show-namespace-events
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
Commiter notes:
Testing it:
Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...
# perf script --show-task --show-namespace
<SNIP>
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154
perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)
<SNIP>
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:42:06 +00:00
|
|
|
bool show_namespace_events;
|
2018-01-07 16:03:53 +00:00
|
|
|
bool show_lost_events;
|
2018-02-06 18:17:59 +00:00
|
|
|
bool show_round_events;
|
2016-01-05 21:09:06 +00:00
|
|
|
bool allocated;
|
2017-10-26 13:30:20 +00:00
|
|
|
bool per_event_dump;
|
2016-01-05 21:09:06 +00:00
|
|
|
struct cpu_map *cpus;
|
|
|
|
struct thread_map *threads;
|
2016-01-07 09:14:05 +00:00
|
|
|
int name_width;
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
const char *time_str;
|
perf script: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 15:00:33 +00:00
|
|
|
struct perf_time_interval *ptime_range;
|
|
|
|
int range_size;
|
2017-12-08 13:13:46 +00:00
|
|
|
int range_num;
|
2015-11-26 17:55:21 +00:00
|
|
|
};
|
|
|
|
|
2016-01-07 09:14:05 +00:00
|
|
|
static int perf_evlist__max_name_len(struct perf_evlist *evlist)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
int max = 0;
|
|
|
|
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(evlist, evsel) {
|
2016-01-07 09:14:05 +00:00
|
|
|
int len = strlen(perf_evsel__name(evsel));
|
|
|
|
|
|
|
|
max = MAX(len, max);
|
|
|
|
}
|
|
|
|
|
|
|
|
return max;
|
|
|
|
}
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
static int data_src__fprintf(u64 data_src, FILE *fp)
|
2016-02-24 08:46:54 +00:00
|
|
|
{
|
|
|
|
struct mem_info mi = { .data_src.val = data_src };
|
|
|
|
char decode[100];
|
|
|
|
char out[100];
|
|
|
|
static int maxlen;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
perf_script__meminfo_scnprintf(decode, 100, &mi);
|
|
|
|
|
|
|
|
len = scnprintf(out, 100, "%16" PRIx64 " %s", data_src, decode);
|
|
|
|
if (maxlen < len)
|
|
|
|
maxlen = len;
|
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
return fprintf(fp, "%-*s", maxlen, out);
|
2016-02-24 08:46:54 +00:00
|
|
|
}
|
|
|
|
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
struct metric_ctx {
|
|
|
|
struct perf_sample *sample;
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
FILE *fp;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void script_print_metric(void *ctx, const char *color,
|
|
|
|
const char *fmt,
|
|
|
|
const char *unit, double val)
|
|
|
|
{
|
|
|
|
struct metric_ctx *mctx = ctx;
|
|
|
|
|
|
|
|
if (!fmt)
|
|
|
|
return;
|
|
|
|
perf_sample__fprintf_start(mctx->sample, mctx->thread, mctx->evsel,
|
2018-01-07 16:03:52 +00:00
|
|
|
PERF_RECORD_SAMPLE, mctx->fp);
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
fputs("\tmetric: ", mctx->fp);
|
|
|
|
if (color)
|
|
|
|
color_fprintf(mctx->fp, color, fmt, val);
|
|
|
|
else
|
|
|
|
printf(fmt, val);
|
|
|
|
fprintf(mctx->fp, " %s\n", unit);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void script_new_line(void *ctx)
|
|
|
|
{
|
|
|
|
struct metric_ctx *mctx = ctx;
|
|
|
|
|
|
|
|
perf_sample__fprintf_start(mctx->sample, mctx->thread, mctx->evsel,
|
2018-01-07 16:03:52 +00:00
|
|
|
PERF_RECORD_SAMPLE, mctx->fp);
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
fputs("\tmetric: ", mctx->fp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void perf_sample__fprint_metric(struct perf_script *script,
|
|
|
|
struct thread *thread,
|
|
|
|
struct perf_evsel *evsel,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
FILE *fp)
|
|
|
|
{
|
|
|
|
struct perf_stat_output_ctx ctx = {
|
|
|
|
.print_metric = script_print_metric,
|
|
|
|
.new_line = script_new_line,
|
|
|
|
.ctx = &(struct metric_ctx) {
|
|
|
|
.sample = sample,
|
|
|
|
.thread = thread,
|
|
|
|
.evsel = evsel,
|
|
|
|
.fp = fp,
|
|
|
|
},
|
|
|
|
.force_header = false,
|
|
|
|
};
|
|
|
|
struct perf_evsel *ev2;
|
|
|
|
static bool init;
|
|
|
|
u64 val;
|
|
|
|
|
|
|
|
if (!init) {
|
|
|
|
perf_stat__init_shadow_stats();
|
|
|
|
init = true;
|
|
|
|
}
|
|
|
|
if (!evsel->stats)
|
|
|
|
perf_evlist__alloc_stats(script->session->evlist, false);
|
|
|
|
if (evsel_script(evsel->leader)->gnum++ == 0)
|
|
|
|
perf_stat__reset_shadow_stats();
|
|
|
|
val = sample->period * evsel->scale;
|
|
|
|
perf_stat__update_shadow_stats(evsel,
|
|
|
|
val,
|
2017-12-05 14:03:04 +00:00
|
|
|
sample->cpu,
|
|
|
|
&rt_stat);
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
evsel_script(evsel)->val = val;
|
|
|
|
if (evsel_script(evsel->leader)->gnum == evsel->leader->nr_members) {
|
|
|
|
for_each_group_member (ev2, evsel->leader) {
|
|
|
|
perf_stat__print_shadow_stats(ev2,
|
|
|
|
evsel_script(ev2)->val,
|
|
|
|
sample->cpu,
|
|
|
|
&ctx,
|
2017-12-05 14:03:05 +00:00
|
|
|
NULL,
|
|
|
|
&rt_stat);
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
}
|
|
|
|
evsel_script(evsel->leader)->gnum = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-03-23 14:55:24 +00:00
|
|
|
static void process_event(struct perf_script *script,
|
2015-11-26 17:55:21 +00:00
|
|
|
struct perf_sample *sample, struct perf_evsel *evsel,
|
2017-02-23 23:46:34 +00:00
|
|
|
struct addr_location *al,
|
|
|
|
struct machine *machine)
|
2011-03-10 05:23:23 +00:00
|
|
|
{
|
2015-04-01 16:29:25 +00:00
|
|
|
struct thread *thread = al->thread;
|
2011-03-15 18:44:01 +00:00
|
|
|
struct perf_event_attr *attr = &evsel->attr;
|
2017-06-21 10:17:19 +00:00
|
|
|
unsigned int type = output_type(attr->type);
|
2017-10-30 16:11:15 +00:00
|
|
|
struct perf_evsel_script *es = evsel->priv;
|
|
|
|
FILE *fp = es->fp;
|
2011-03-10 05:23:28 +00:00
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
if (output[type].fields == 0)
|
2011-03-10 05:23:28 +00:00
|
|
|
return;
|
|
|
|
|
2017-10-30 16:11:15 +00:00
|
|
|
++es->samples;
|
|
|
|
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_SAMPLE, fp);
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
2014-08-25 14:45:42 +00:00
|
|
|
if (PRINT_FIELD(PERIOD))
|
2017-10-26 12:51:13 +00:00
|
|
|
fprintf(fp, "%10" PRIu64 " ", sample->period);
|
2014-08-25 14:45:42 +00:00
|
|
|
|
2013-11-18 05:34:52 +00:00
|
|
|
if (PRINT_FIELD(EVNAME)) {
|
|
|
|
const char *evname = perf_evsel__name(evsel);
|
2016-01-07 09:14:05 +00:00
|
|
|
|
|
|
|
if (!script->name_width)
|
|
|
|
script->name_width = perf_evlist__max_name_len(script->session->evlist);
|
|
|
|
|
2017-10-26 12:51:13 +00:00
|
|
|
fprintf(fp, "%*s: ", script->name_width, evname ?: "[unknown]");
|
2013-11-18 05:34:52 +00:00
|
|
|
}
|
|
|
|
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
if (print_flags)
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_flags(sample->flags, fp);
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
|
2012-01-30 04:43:09 +00:00
|
|
|
if (is_bts_event(attr)) {
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_bts(sample, evsel, thread, al, machine, fp);
|
2012-01-30 04:43:09 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-10-26 13:26:52 +00:00
|
|
|
if (PRINT_FIELD(TRACE)) {
|
|
|
|
event_format__fprintf(evsel->tp_format, sample->cpu,
|
|
|
|
sample->raw_data, sample->raw_size, fp);
|
|
|
|
}
|
2017-05-26 08:17:22 +00:00
|
|
|
|
|
|
|
if (attr->type == PERF_TYPE_SYNTH && PRINT_FIELD(SYNTH))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_synth(sample, evsel, fp);
|
2017-05-26 08:17:22 +00:00
|
|
|
|
2011-05-30 19:08:23 +00:00
|
|
|
if (PRINT_FIELD(ADDR))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_addr(sample, thread, attr, fp);
|
2011-05-30 19:08:23 +00:00
|
|
|
|
2016-02-15 08:34:51 +00:00
|
|
|
if (PRINT_FIELD(DATA_SRC))
|
2017-10-17 13:54:24 +00:00
|
|
|
data_src__fprintf(sample->data_src, fp);
|
2016-02-15 08:34:51 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(WEIGHT))
|
2017-10-17 13:54:24 +00:00
|
|
|
fprintf(fp, "%16" PRIu64, sample->weight);
|
2016-02-15 08:34:51 +00:00
|
|
|
|
2011-05-27 20:28:43 +00:00
|
|
|
if (PRINT_FIELD(IP)) {
|
2016-04-20 02:32:11 +00:00
|
|
|
struct callchain_cursor *cursor = NULL;
|
2016-04-14 20:45:51 +00:00
|
|
|
|
2016-04-18 14:31:46 +00:00
|
|
|
if (symbol_conf.use_callchain && sample->callchain &&
|
2016-04-20 02:32:11 +00:00
|
|
|
thread__resolve_callchain(al->thread, &callchain_cursor, evsel,
|
2016-04-14 20:45:51 +00:00
|
|
|
sample, NULL, NULL, scripting_max_stack) == 0)
|
2016-04-20 02:32:11 +00:00
|
|
|
cursor = &callchain_cursor;
|
2013-08-08 02:50:51 +00:00
|
|
|
|
2017-10-17 13:54:24 +00:00
|
|
|
fputc(cursor ? '\n' : ' ', fp);
|
|
|
|
sample__fprintf_sym(sample, al, 0, output[type].print_ip_opts, cursor, fp);
|
2011-03-10 05:23:27 +00:00
|
|
|
}
|
|
|
|
|
2015-08-31 16:41:10 +00:00
|
|
|
if (PRINT_FIELD(IREGS))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_iregs(sample, attr, fp);
|
2015-08-31 16:41:10 +00:00
|
|
|
|
2017-09-05 18:40:57 +00:00
|
|
|
if (PRINT_FIELD(UREGS))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_uregs(sample, attr, fp);
|
2017-09-05 18:40:57 +00:00
|
|
|
|
2015-08-31 16:41:13 +00:00
|
|
|
if (PRINT_FIELD(BRSTACK))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_brstack(sample, thread, attr, fp);
|
2015-08-31 16:41:13 +00:00
|
|
|
else if (PRINT_FIELD(BRSTACKSYM))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_brstacksym(sample, thread, attr, fp);
|
perf script: Support -F brstackoff,dso
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 16:38:25 +00:00
|
|
|
else if (PRINT_FIELD(BRSTACKOFF))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_brstackoff(sample, thread, attr, fp);
|
2015-08-31 16:41:13 +00:00
|
|
|
|
perf script: Print bpf-output events in 'perf script'
This patch allows 'perf script' output messages from BPF program. For
example, use test_bpf_output_3.c at the end of this commit message,
# ./perf record -e bpf-output/no-inherit,name=evt/ \
-e ./test_bpf_output_3.c/map:channel.event=evt/ \
usleep 100000
# ./perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
Two samples from BPF output are printed by both binary and string
format.
If BPF program output something unprintable, string format is
suppressed.
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
perf_event_output(ctx, &channel, get_smp_processor_id(),
&output_str, sizeof(output_str));
return 0;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 11:20:45 +00:00
|
|
|
if (perf_evsel__is_bpf_output(evsel) && PRINT_FIELD(BPF_OUTPUT))
|
2017-10-17 13:54:24 +00:00
|
|
|
perf_sample__fprintf_bpf_output(sample, fp);
|
|
|
|
perf_sample__fprintf_insn(sample, attr, thread, machine, fp);
|
2017-08-29 17:11:11 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(PHYS_ADDR))
|
2017-10-26 12:51:13 +00:00
|
|
|
fprintf(fp, "%16" PRIx64, sample->phys_addr);
|
|
|
|
fprintf(fp, "\n");
|
perf script: Allow computing 'perf stat' style metrics
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-17 21:43:00 +00:00
|
|
|
|
|
|
|
if (PRINT_FIELD(METRIC))
|
|
|
|
perf_sample__fprint_metric(script, thread, evsel, sample, fp);
|
2011-03-10 05:23:23 +00:00
|
|
|
}
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
static struct scripting_ops *scripting_ops;
|
|
|
|
|
2016-01-06 10:49:56 +00:00
|
|
|
static void __process_stat(struct perf_evsel *counter, u64 tstamp)
|
|
|
|
{
|
|
|
|
int nthreads = thread_map__nr(counter->threads);
|
|
|
|
int ncpus = perf_evsel__nr_cpus(counter);
|
|
|
|
int cpu, thread;
|
|
|
|
static int header_printed;
|
|
|
|
|
|
|
|
if (counter->system_wide)
|
|
|
|
nthreads = 1;
|
|
|
|
|
|
|
|
if (!header_printed) {
|
|
|
|
printf("%3s %8s %15s %15s %15s %15s %s\n",
|
|
|
|
"CPU", "THREAD", "VAL", "ENA", "RUN", "TIME", "EVENT");
|
|
|
|
header_printed = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (thread = 0; thread < nthreads; thread++) {
|
|
|
|
for (cpu = 0; cpu < ncpus; cpu++) {
|
|
|
|
struct perf_counts_values *counts;
|
|
|
|
|
|
|
|
counts = perf_counts(counter->counts, cpu, thread);
|
|
|
|
|
|
|
|
printf("%3d %8d %15" PRIu64 " %15" PRIu64 " %15" PRIu64 " %15" PRIu64 " %s\n",
|
|
|
|
counter->cpus->map[cpu],
|
|
|
|
thread_map__pid(counter->threads, thread),
|
|
|
|
counts->val,
|
|
|
|
counts->ena,
|
|
|
|
counts->run,
|
|
|
|
tstamp,
|
|
|
|
perf_evsel__name(counter));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-01-05 21:09:09 +00:00
|
|
|
static void process_stat(struct perf_evsel *counter, u64 tstamp)
|
|
|
|
{
|
|
|
|
if (scripting_ops && scripting_ops->process_stat)
|
|
|
|
scripting_ops->process_stat(&stat_config, counter, tstamp);
|
2016-01-06 10:49:56 +00:00
|
|
|
else
|
|
|
|
__process_stat(counter, tstamp);
|
2016-01-05 21:09:09 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void process_stat_interval(u64 tstamp)
|
|
|
|
{
|
|
|
|
if (scripting_ops && scripting_ops->process_stat_interval)
|
|
|
|
scripting_ops->process_stat_interval(tstamp);
|
|
|
|
}
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
static void setup_scripting(void)
|
|
|
|
{
|
2009-11-25 07:15:48 +00:00
|
|
|
setup_perl_scripting();
|
2010-01-27 08:27:57 +00:00
|
|
|
setup_python_scripting();
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
2014-08-15 19:08:37 +00:00
|
|
|
static int flush_scripting(void)
|
|
|
|
{
|
2015-11-26 13:55:23 +00:00
|
|
|
return scripting_ops ? scripting_ops->flush_script() : 0;
|
2014-08-15 19:08:37 +00:00
|
|
|
}
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
static int cleanup_scripting(void)
|
|
|
|
{
|
2010-11-16 17:45:39 +00:00
|
|
|
pr_debug("\nperf script stopped\n");
|
2010-05-10 04:46:57 +00:00
|
|
|
|
2015-11-26 13:55:23 +00:00
|
|
|
return scripting_ops ? scripting_ops->stop_script() : 0;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
2015-11-26 17:55:21 +00:00
|
|
|
static int process_sample_event(struct perf_tool *tool,
|
2011-11-25 10:19:45 +00:00
|
|
|
union perf_event *event,
|
2011-01-29 16:01:45 +00:00
|
|
|
struct perf_sample *sample,
|
2011-03-15 18:44:01 +00:00
|
|
|
struct perf_evsel *evsel,
|
2011-11-28 09:56:39 +00:00
|
|
|
struct machine *machine)
|
2009-08-17 14:18:08 +00:00
|
|
|
{
|
2015-11-26 17:55:21 +00:00
|
|
|
struct perf_script *scr = container_of(tool, struct perf_script, tool);
|
2011-11-21 17:02:52 +00:00
|
|
|
struct addr_location al;
|
2009-08-17 14:18:08 +00:00
|
|
|
|
2017-12-08 13:13:46 +00:00
|
|
|
if (perf_time__ranges_skip_sample(scr->ptime_range, scr->range_num,
|
|
|
|
sample->time)) {
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
return 0;
|
2017-12-08 13:13:46 +00:00
|
|
|
}
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
|
2011-03-10 05:23:28 +00:00
|
|
|
if (debug_mode) {
|
|
|
|
if (sample->time < last_timestamp) {
|
|
|
|
pr_err("Samples misordered, previous: %" PRIu64
|
|
|
|
" this: %" PRIu64 "\n", last_timestamp,
|
|
|
|
sample->time);
|
|
|
|
nr_unordered++;
|
2010-04-23 23:55:09 +00:00
|
|
|
}
|
2011-03-10 05:23:28 +00:00
|
|
|
last_timestamp = sample->time;
|
|
|
|
return 0;
|
2009-08-17 14:18:08 +00:00
|
|
|
}
|
2011-07-04 11:57:50 +00:00
|
|
|
|
2016-03-22 21:39:09 +00:00
|
|
|
if (machine__resolve(machine, &al, sample) < 0) {
|
2011-11-21 17:02:52 +00:00
|
|
|
pr_err("problem processing %d event, skipping it.\n",
|
|
|
|
event->header.type);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (al.filtered)
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
goto out_put;
|
2011-11-21 17:02:52 +00:00
|
|
|
|
2011-07-04 11:57:50 +00:00
|
|
|
if (cpu_list && !test_bit(sample->cpu, cpu_bitmap))
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
goto out_put;
|
2011-07-04 11:57:50 +00:00
|
|
|
|
2015-11-26 13:55:23 +00:00
|
|
|
if (scripting_ops)
|
|
|
|
scripting_ops->process_event(event, sample, evsel, &al);
|
|
|
|
else
|
2017-02-23 23:46:34 +00:00
|
|
|
process_event(scr, sample, evsel, &al, machine);
|
2015-11-26 13:55:23 +00:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
out_put:
|
|
|
|
addr_location__put(&al);
|
2009-08-17 14:18:08 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-11-01 13:51:30 +00:00
|
|
|
static int process_attr(struct perf_tool *tool, union perf_event *event,
|
|
|
|
struct perf_evlist **pevlist)
|
|
|
|
{
|
|
|
|
struct perf_script *scr = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_evlist *evlist;
|
|
|
|
struct perf_evsel *evsel, *pos;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = perf_event__process_attr(tool, event, pevlist);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
evlist = *pevlist;
|
|
|
|
evsel = perf_evlist__last(*pevlist);
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
if (evsel->attr.type >= PERF_TYPE_MAX &&
|
|
|
|
evsel->attr.type != PERF_TYPE_SYNTH)
|
2013-11-01 13:51:30 +00:00
|
|
|
return 0;
|
|
|
|
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(evlist, pos) {
|
2013-11-01 13:51:30 +00:00
|
|
|
if (pos->attr.type == evsel->attr.type && pos != evsel)
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_print_ip_opts(&evsel->attr);
|
|
|
|
|
2015-10-16 10:41:25 +00:00
|
|
|
if (evsel->attr.sample_type)
|
|
|
|
err = perf_evsel__check_attr(evsel, scr->session);
|
|
|
|
|
|
|
|
return err;
|
2013-11-01 13:51:30 +00:00
|
|
|
}
|
|
|
|
|
2013-11-26 08:51:12 +00:00
|
|
|
static int process_comm_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
2015-07-21 09:44:05 +00:00
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
2013-11-26 08:51:12 +00:00
|
|
|
int ret = -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->comm.pid, event->comm.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing COMM event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (perf_event__process_comm(tool, event, sample, machine) < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = 0;
|
|
|
|
sample->tid = event->comm.tid;
|
|
|
|
sample->pid = event->comm.pid;
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_COMM, stdout);
|
2013-11-26 08:51:12 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
ret = 0;
|
|
|
|
out:
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
thread__put(thread);
|
2013-11-26 08:51:12 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
perf script: Add script print support for namespace events
Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.
Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.
$ perf script --show-namespace-events
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
Commiter notes:
Testing it:
Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...
# perf script --show-task --show-namespace
<SNIP>
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154
perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)
<SNIP>
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:42:06 +00:00
|
|
|
static int process_namespaces_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
|
|
|
int ret = -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->namespaces.pid,
|
|
|
|
event->namespaces.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing NAMESPACES event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (perf_event__process_namespaces(tool, event, sample, machine) < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = 0;
|
|
|
|
sample->tid = event->namespaces.tid;
|
|
|
|
sample->pid = event->namespaces.pid;
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_NAMESPACES, stdout);
|
perf script: Add script print support for namespace events
Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.
Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.
$ perf script --show-namespace-events
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
Commiter notes:
Testing it:
Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...
# perf script --show-task --show-namespace
<SNIP>
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154
perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)
<SNIP>
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:42:06 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
|
|
thread__put(thread);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-11-26 08:51:12 +00:00
|
|
|
static int process_fork_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
2015-07-21 09:44:05 +00:00
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
2013-11-26 08:51:12 +00:00
|
|
|
|
|
|
|
if (perf_event__process_fork(tool, event, sample, machine) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->fork.pid, event->fork.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing FORK event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = event->fork.time;
|
|
|
|
sample->tid = event->fork.tid;
|
|
|
|
sample->pid = event->fork.pid;
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_FORK, stdout);
|
2013-11-26 08:51:12 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
thread__put(thread);
|
2013-11-26 08:51:12 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int process_exit_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
int err = 0;
|
2013-11-26 08:51:12 +00:00
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
2015-07-21 09:44:05 +00:00
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
2013-11-26 08:51:12 +00:00
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->fork.pid, event->fork.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing EXIT event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = 0;
|
2015-08-18 09:07:05 +00:00
|
|
|
sample->tid = event->fork.tid;
|
|
|
|
sample->pid = event->fork.pid;
|
2013-11-26 08:51:12 +00:00
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_EXIT, stdout);
|
2013-11-26 08:51:12 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
|
|
|
|
if (perf_event__process_exit(tool, event, sample, machine) < 0)
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
err = -1;
|
2013-11-26 08:51:12 +00:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
thread__put(thread);
|
|
|
|
return err;
|
2013-11-26 08:51:12 +00:00
|
|
|
}
|
|
|
|
|
2013-11-26 08:54:26 +00:00
|
|
|
static int process_mmap_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
2015-07-21 09:44:05 +00:00
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
2013-11-26 08:54:26 +00:00
|
|
|
|
|
|
|
if (perf_event__process_mmap(tool, event, sample, machine) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->mmap.pid, event->mmap.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing MMAP event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = 0;
|
|
|
|
sample->tid = event->mmap.tid;
|
|
|
|
sample->pid = event->mmap.pid;
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_MMAP, stdout);
|
2013-11-26 08:54:26 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
thread__put(thread);
|
2013-11-26 08:54:26 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int process_mmap2_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
2015-07-21 09:44:05 +00:00
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
2013-11-26 08:54:26 +00:00
|
|
|
|
|
|
|
if (perf_event__process_mmap2(tool, event, sample, machine) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, event->mmap2.pid, event->mmap2.tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing MMAP2 event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!evsel->attr.sample_id_all) {
|
|
|
|
sample->cpu = 0;
|
|
|
|
sample->time = 0;
|
|
|
|
sample->tid = event->mmap2.tid;
|
|
|
|
sample->pid = event->mmap2.pid;
|
|
|
|
}
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_MMAP2, stdout);
|
2013-11-26 08:54:26 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
|
|
|
thread__put(thread);
|
2013-11-26 08:54:26 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-07-21 09:44:06 +00:00
|
|
|
static int process_switch_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *thread;
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
|
|
|
|
|
|
|
if (perf_event__process_switch(tool, event, sample, machine) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, sample->pid,
|
|
|
|
sample->tid);
|
|
|
|
if (thread == NULL) {
|
|
|
|
pr_debug("problem processing SWITCH event, skipping it.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2018-01-07 16:03:52 +00:00
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_SWITCH, stdout);
|
2015-07-21 09:44:06 +00:00
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
thread__put(thread);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-07 16:03:53 +00:00
|
|
|
static int
|
|
|
|
process_lost_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct machine *machine)
|
|
|
|
{
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
struct perf_session *session = script->session;
|
|
|
|
struct perf_evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
|
|
|
|
struct thread *thread;
|
|
|
|
|
|
|
|
thread = machine__findnew_thread(machine, sample->pid,
|
|
|
|
sample->tid);
|
|
|
|
if (thread == NULL)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
perf_sample__fprintf_start(sample, thread, evsel,
|
|
|
|
PERF_RECORD_LOST, stdout);
|
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
thread__put(thread);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-02-06 18:17:59 +00:00
|
|
|
static int
|
|
|
|
process_finished_round_event(struct perf_tool *tool __maybe_unused,
|
|
|
|
union perf_event *event,
|
|
|
|
struct ordered_events *oe __maybe_unused)
|
|
|
|
|
|
|
|
{
|
|
|
|
perf_event__fprintf(event, stdout);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-09-10 22:15:03 +00:00
|
|
|
static void sig_handler(int sig __maybe_unused)
|
2010-04-02 04:59:18 +00:00
|
|
|
{
|
|
|
|
session_done = 1;
|
|
|
|
}
|
|
|
|
|
2017-10-26 13:30:20 +00:00
|
|
|
static void perf_script__fclose_per_event_dump(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_evlist *evlist = script->session->evlist;
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
|
|
|
|
evlist__for_each_entry(evlist, evsel) {
|
|
|
|
if (!evsel->priv)
|
|
|
|
break;
|
2017-10-30 16:11:15 +00:00
|
|
|
perf_evsel_script__delete(evsel->priv);
|
2017-10-26 13:30:20 +00:00
|
|
|
evsel->priv = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int perf_script__fopen_per_event_dump(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
|
|
|
|
evlist__for_each_entry(script->session->evlist, evsel) {
|
2017-11-09 19:04:26 +00:00
|
|
|
/*
|
|
|
|
* Already setup? I.e. we may be called twice in cases like
|
|
|
|
* Intel PT, one for the intel_pt// and dummy events, then
|
|
|
|
* for the evsels syntheized from the auxtrace info.
|
|
|
|
*
|
|
|
|
* Ses perf_script__process_auxtrace_info.
|
|
|
|
*/
|
|
|
|
if (evsel->priv != NULL)
|
|
|
|
continue;
|
|
|
|
|
2017-01-23 21:07:59 +00:00
|
|
|
evsel->priv = perf_evsel_script__new(evsel, script->session->data);
|
2017-10-26 13:30:20 +00:00
|
|
|
if (evsel->priv == NULL)
|
|
|
|
goto out_err_fclose;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_err_fclose:
|
|
|
|
perf_script__fclose_per_event_dump(script);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int perf_script__setup_per_event_dump(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
2017-10-30 16:11:15 +00:00
|
|
|
static struct perf_evsel_script es_stdout;
|
2017-10-26 13:30:20 +00:00
|
|
|
|
|
|
|
if (script->per_event_dump)
|
|
|
|
return perf_script__fopen_per_event_dump(script);
|
|
|
|
|
2017-10-30 16:11:15 +00:00
|
|
|
es_stdout.fp = stdout;
|
|
|
|
|
2017-10-26 13:30:20 +00:00
|
|
|
evlist__for_each_entry(script->session->evlist, evsel)
|
2017-10-30 16:11:15 +00:00
|
|
|
evsel->priv = &es_stdout;
|
2017-10-26 13:30:20 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-30 16:11:15 +00:00
|
|
|
static void perf_script__exit_per_event_dump_stats(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
|
|
|
|
evlist__for_each_entry(script->session->evlist, evsel) {
|
|
|
|
struct perf_evsel_script *es = evsel->priv;
|
|
|
|
|
|
|
|
perf_evsel_script__fprintf(es, stdout);
|
|
|
|
perf_evsel_script__delete(es);
|
|
|
|
evsel->priv = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-10-22 07:34:07 +00:00
|
|
|
static int __cmd_script(struct perf_script *script)
|
2009-08-17 14:18:08 +00:00
|
|
|
{
|
2010-05-27 13:46:25 +00:00
|
|
|
int ret;
|
|
|
|
|
2010-04-02 04:59:18 +00:00
|
|
|
signal(SIGINT, sig_handler);
|
|
|
|
|
2013-11-26 08:51:12 +00:00
|
|
|
/* override event processing functions */
|
|
|
|
if (script->show_task_events) {
|
|
|
|
script->tool.comm = process_comm_event;
|
|
|
|
script->tool.fork = process_fork_event;
|
|
|
|
script->tool.exit = process_exit_event;
|
|
|
|
}
|
2013-11-26 08:54:26 +00:00
|
|
|
if (script->show_mmap_events) {
|
|
|
|
script->tool.mmap = process_mmap_event;
|
|
|
|
script->tool.mmap2 = process_mmap2_event;
|
|
|
|
}
|
2015-07-21 09:44:06 +00:00
|
|
|
if (script->show_switch_events)
|
|
|
|
script->tool.context_switch = process_switch_event;
|
perf script: Add script print support for namespace events
Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.
Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.
$ perf script --show-namespace-events
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
Commiter notes:
Testing it:
Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...
# perf script --show-task --show-namespace
<SNIP>
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154
perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)
<SNIP>
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:42:06 +00:00
|
|
|
if (script->show_namespace_events)
|
|
|
|
script->tool.namespaces = process_namespaces_event;
|
2018-01-07 16:03:53 +00:00
|
|
|
if (script->show_lost_events)
|
|
|
|
script->tool.lost = process_lost_event;
|
2018-02-06 18:17:59 +00:00
|
|
|
if (script->show_round_events) {
|
|
|
|
script->tool.ordered_events = false;
|
|
|
|
script->tool.finished_round = process_finished_round_event;
|
|
|
|
}
|
2013-11-26 08:51:12 +00:00
|
|
|
|
2017-10-26 13:30:20 +00:00
|
|
|
if (perf_script__setup_per_event_dump(script)) {
|
|
|
|
pr_err("Couldn't create the per event dump files\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2015-03-03 14:58:45 +00:00
|
|
|
ret = perf_session__process_events(script->session);
|
2010-05-27 13:46:25 +00:00
|
|
|
|
2017-10-26 13:30:20 +00:00
|
|
|
if (script->per_event_dump)
|
2017-10-30 16:11:15 +00:00
|
|
|
perf_script__exit_per_event_dump_stats(script);
|
2017-10-26 13:30:20 +00:00
|
|
|
|
2011-01-04 18:27:30 +00:00
|
|
|
if (debug_mode)
|
2011-01-22 22:37:02 +00:00
|
|
|
pr_err("Misordered timestamps: %" PRIu64 "\n", nr_unordered);
|
2010-05-27 13:46:25 +00:00
|
|
|
|
|
|
|
return ret;
|
2009-08-17 14:18:08 +00:00
|
|
|
}
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
struct script_spec {
|
|
|
|
struct list_head node;
|
|
|
|
struct scripting_ops *ops;
|
|
|
|
char spec[0];
|
|
|
|
};
|
|
|
|
|
2011-01-04 18:32:52 +00:00
|
|
|
static LIST_HEAD(script_specs);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
|
|
|
static struct script_spec *script_spec__new(const char *spec,
|
|
|
|
struct scripting_ops *ops)
|
|
|
|
{
|
|
|
|
struct script_spec *s = malloc(sizeof(*s) + strlen(spec) + 1);
|
|
|
|
|
|
|
|
if (s != NULL) {
|
|
|
|
strcpy(s->spec, spec);
|
|
|
|
s->ops = ops;
|
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void script_spec__add(struct script_spec *s)
|
|
|
|
{
|
|
|
|
list_add_tail(&s->node, &script_specs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct script_spec *script_spec__find(const char *spec)
|
|
|
|
{
|
|
|
|
struct script_spec *s;
|
|
|
|
|
|
|
|
list_for_each_entry(s, &script_specs, node)
|
|
|
|
if (strcasecmp(s->spec, spec) == 0)
|
|
|
|
return s;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
int script_spec_register(const char *spec, struct scripting_ops *ops)
|
|
|
|
{
|
|
|
|
struct script_spec *s;
|
|
|
|
|
|
|
|
s = script_spec__find(spec);
|
|
|
|
if (s)
|
|
|
|
return -1;
|
|
|
|
|
2016-02-25 15:13:10 +00:00
|
|
|
s = script_spec__new(spec, ops);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
if (!s)
|
|
|
|
return -1;
|
2016-02-25 15:13:10 +00:00
|
|
|
else
|
|
|
|
script_spec__add(s);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct scripting_ops *script_spec__lookup(const char *spec)
|
|
|
|
{
|
|
|
|
struct script_spec *s = script_spec__find(spec);
|
|
|
|
if (!s)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return s->ops;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void list_available_languages(void)
|
|
|
|
{
|
|
|
|
struct script_spec *s;
|
|
|
|
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
fprintf(stderr, "Scripting language extensions (used in "
|
2010-11-16 17:45:39 +00:00
|
|
|
"perf script -s [spec:]script.[spec]):\n\n");
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
|
|
|
list_for_each_entry(s, &script_specs, node)
|
|
|
|
fprintf(stderr, " %-42s [%s]\n", s->spec, s->ops->name);
|
|
|
|
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
}
|
|
|
|
|
2012-09-10 22:15:03 +00:00
|
|
|
static int parse_scriptname(const struct option *opt __maybe_unused,
|
|
|
|
const char *str, int unset __maybe_unused)
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
{
|
|
|
|
char spec[PATH_MAX];
|
|
|
|
const char *script, *ext;
|
|
|
|
int len;
|
|
|
|
|
2010-01-27 08:27:52 +00:00
|
|
|
if (strcmp(str, "lang") == 0) {
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
list_available_languages();
|
2010-01-27 08:27:52 +00:00
|
|
|
exit(0);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
script = strchr(str, ':');
|
|
|
|
if (script) {
|
|
|
|
len = script - str;
|
|
|
|
if (len >= PATH_MAX) {
|
|
|
|
fprintf(stderr, "invalid language specifier");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
strncpy(spec, str, len);
|
|
|
|
spec[len] = '\0';
|
|
|
|
scripting_ops = script_spec__lookup(spec);
|
|
|
|
if (!scripting_ops) {
|
|
|
|
fprintf(stderr, "invalid language specifier");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
script++;
|
|
|
|
} else {
|
|
|
|
script = str;
|
2010-10-10 15:11:02 +00:00
|
|
|
ext = strrchr(script, '.');
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
if (!ext) {
|
|
|
|
fprintf(stderr, "invalid script extension");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
scripting_ops = script_spec__lookup(++ext);
|
|
|
|
if (!scripting_ops) {
|
|
|
|
fprintf(stderr, "invalid script extension");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
script_name = strdup(script);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-09-10 22:15:03 +00:00
|
|
|
static int parse_output_fields(const struct option *opt __maybe_unused,
|
|
|
|
const char *arg, int unset __maybe_unused)
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
{
|
2017-04-05 14:43:41 +00:00
|
|
|
char *tok, *strtok_saveptr = NULL;
|
2012-12-20 19:11:19 +00:00
|
|
|
int i, imax = ARRAY_SIZE(all_output_options);
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
int j;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
int rc = 0;
|
|
|
|
char *str = strdup(arg);
|
2011-03-10 05:23:28 +00:00
|
|
|
int type = -1;
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
enum { DEFAULT, SET, ADD, REMOVE } change = DEFAULT;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
|
|
|
if (!str)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
/* first word can state for which event type the user is specifying
|
|
|
|
* the fields. If no type exists, the specified fields apply to all
|
|
|
|
* event types found in the file minus the invalid fields for a type.
|
2011-03-10 05:23:28 +00:00
|
|
|
*/
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
tok = strchr(str, ':');
|
|
|
|
if (tok) {
|
|
|
|
*tok = '\0';
|
|
|
|
tok++;
|
|
|
|
if (!strcmp(str, "hw"))
|
|
|
|
type = PERF_TYPE_HARDWARE;
|
|
|
|
else if (!strcmp(str, "sw"))
|
|
|
|
type = PERF_TYPE_SOFTWARE;
|
|
|
|
else if (!strcmp(str, "trace"))
|
|
|
|
type = PERF_TYPE_TRACEPOINT;
|
2011-04-14 17:38:18 +00:00
|
|
|
else if (!strcmp(str, "raw"))
|
|
|
|
type = PERF_TYPE_RAW;
|
perf script: Add support for PERF_TYPE_BREAKPOINT
Useful for getting stack traces for hardware breakpoint events.
Test result:
Before this patch:
# ~/perf record -g -e mem:0x600980 ./sample
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (12 samples) ]
# ~/perf script
# ~/perf script -F comm,tid,pid,time,event,ip,sym,dso
sample 22520/22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520/22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
...
After this patch:
# ~/perf script
sample 22520 97457.836294: mem:0x600980:
5a4ad8 __clear_user (/lib/modules/4.3.0-rc4+/build/vmlinux)
...
3f41ba sys_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
979395 return_from_execve (/lib/modules/4.3.0-rc4+/build/vmlinux)
7f1b59719cf7 [unknown] ([unknown])
sample 22520 97457.836648: mem:0x600980:
532 main (/home/w00229757/DataBreakpoints/sample)
21bd5 __libc_start_main (/tmp/oxygen_root-root/lib64/libc-2.18.so)
Committer note:
So, further testing, lets do it for a kernel global variable,
tcp_hashinfo:
# grep -w tcp_hashinfo /proc/kallsyms
ffffffff8202fc00 B tcp_hashinfo
#
Note: allow specifying mem:tcp_hashinfo:
# perf record -g -e mem:0xffffffff81c65ac0 -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.790 MB perf.data ]
#
# perf evlist
mem:0xffffffff8202fc00
# perf evlist -v
mem:0xffffffff8202fc00: type: 5, size: 112, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, bp_type: 3, { bp_addr, config1 }: 0xffffffff8202fc00, { bp_len, config2 }: 0x4
#
Then, after this patch:
# perf script
swapper 0 [000] 171036.986988: mem:0xffffffff8202fc00:
8a0fb5 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
8bc09d tcp_v4_early_demux (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
804c27 cpuidle_enter (/lib/modules/4.3.0+/build/vmlinux)
2ded22 call_cpuidle (/lib/modules/4.3.0+/build/vmlinux)
2defb6 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-08 02:25:43 +00:00
|
|
|
else if (!strcmp(str, "break"))
|
|
|
|
type = PERF_TYPE_BREAKPOINT;
|
2017-06-21 10:17:19 +00:00
|
|
|
else if (!strcmp(str, "synth"))
|
|
|
|
type = OUTPUT_TYPE_SYNTH;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
else {
|
|
|
|
fprintf(stderr, "Invalid event type in field string.\n");
|
2011-11-25 10:38:40 +00:00
|
|
|
rc = -EINVAL;
|
|
|
|
goto out;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (output[type].user_set)
|
|
|
|
pr_warning("Overriding previous field request for %s events.\n",
|
|
|
|
event_type(type));
|
|
|
|
|
|
|
|
output[type].fields = 0;
|
|
|
|
output[type].user_set = true;
|
2011-04-07 03:54:20 +00:00
|
|
|
output[type].wildcard_set = false;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
|
|
|
|
} else {
|
|
|
|
tok = str;
|
|
|
|
if (strlen(str) == 0) {
|
|
|
|
fprintf(stderr,
|
|
|
|
"Cannot set fields to 'none' for all event types.\n");
|
|
|
|
rc = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
/* Don't override defaults for +- */
|
|
|
|
if (strchr(str, '+') || strchr(str, '-'))
|
|
|
|
goto parse;
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (output_set_by_user())
|
|
|
|
pr_warning("Overriding previous field request for all events.\n");
|
|
|
|
|
2017-06-21 10:17:19 +00:00
|
|
|
for (j = 0; j < OUTPUT_TYPE_MAX; ++j) {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
output[j].fields = 0;
|
|
|
|
output[j].user_set = true;
|
2011-04-07 03:54:20 +00:00
|
|
|
output[j].wildcard_set = true;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
|
|
|
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
parse:
|
2017-04-05 14:43:41 +00:00
|
|
|
for (tok = strtok_r(tok, ",", &strtok_saveptr); tok; tok = strtok_r(NULL, ",", &strtok_saveptr)) {
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
if (*tok == '+') {
|
|
|
|
if (change == SET)
|
|
|
|
goto out_badmix;
|
|
|
|
change = ADD;
|
|
|
|
tok++;
|
|
|
|
} else if (*tok == '-') {
|
|
|
|
if (change == SET)
|
|
|
|
goto out_badmix;
|
|
|
|
change = REMOVE;
|
|
|
|
tok++;
|
|
|
|
} else {
|
|
|
|
if (change != SET && change != DEFAULT)
|
|
|
|
goto out_badmix;
|
|
|
|
change = SET;
|
|
|
|
}
|
|
|
|
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
for (i = 0; i < imax; ++i) {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (strcmp(tok, all_output_options[i].str) == 0)
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
break;
|
|
|
|
}
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
if (i == imax && strcmp(tok, "flags") == 0) {
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
print_flags = change == REMOVE ? false : true;
|
perf script: Add field option 'flags' to print sample flags
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09 15:54:05 +00:00
|
|
|
continue;
|
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
if (i == imax) {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
fprintf(stderr, "Invalid field requested.\n");
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
rc = -EINVAL;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
goto out;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (type == -1) {
|
|
|
|
/* add user option to all events types for
|
|
|
|
* which it is valid
|
|
|
|
*/
|
2017-06-21 10:17:19 +00:00
|
|
|
for (j = 0; j < OUTPUT_TYPE_MAX; ++j) {
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (output[j].invalid_fields & all_output_options[i].field) {
|
|
|
|
pr_warning("\'%s\' not valid for %s events. Ignoring.\n",
|
|
|
|
all_output_options[i].str, event_type(j));
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
} else {
|
|
|
|
if (change == REMOVE)
|
|
|
|
output[j].fields &= ~all_output_options[i].field;
|
|
|
|
else
|
|
|
|
output[j].fields |= all_output_options[i].field;
|
|
|
|
}
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (output[type].invalid_fields & all_output_options[i].field) {
|
|
|
|
fprintf(stderr, "\'%s\' not valid for %s events.\n",
|
|
|
|
all_output_options[i].str, event_type(type));
|
|
|
|
|
|
|
|
rc = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
output[type].fields |= all_output_options[i].field;
|
|
|
|
}
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (type >= 0) {
|
|
|
|
if (output[type].fields == 0) {
|
|
|
|
pr_debug("No fields requested for %s type. "
|
|
|
|
"Events will not be displayed.\n", event_type(type));
|
|
|
|
}
|
|
|
|
}
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
goto out;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
out_badmix:
|
|
|
|
fprintf(stderr, "Cannot mix +-field with overridden fields\n");
|
|
|
|
rc = -EINVAL;
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
out:
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
free(str);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
#define for_each_lang(scripts_path, scripts_dir, lang_dirent) \
|
|
|
|
while ((lang_dirent = readdir(scripts_dir)) != NULL) \
|
|
|
|
if ((lang_dirent->d_type == DT_DIR || \
|
|
|
|
(lang_dirent->d_type == DT_UNKNOWN && \
|
|
|
|
is_directory(scripts_path, lang_dirent))) && \
|
|
|
|
(strcmp(lang_dirent->d_name, ".")) && \
|
|
|
|
(strcmp(lang_dirent->d_name, "..")))
|
|
|
|
|
|
|
|
#define for_each_script(lang_path, lang_dir, script_dirent) \
|
|
|
|
while ((script_dirent = readdir(lang_dir)) != NULL) \
|
|
|
|
if (script_dirent->d_type != DT_DIR && \
|
|
|
|
(script_dirent->d_type != DT_UNKNOWN || \
|
|
|
|
!is_directory(lang_path, script_dirent)))
|
2009-12-15 08:53:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
#define RECORD_SUFFIX "-record"
|
|
|
|
#define REPORT_SUFFIX "-report"
|
|
|
|
|
|
|
|
struct script_desc {
|
|
|
|
struct list_head node;
|
|
|
|
char *name;
|
|
|
|
char *half_liner;
|
|
|
|
char *args;
|
|
|
|
};
|
|
|
|
|
2011-01-04 18:32:52 +00:00
|
|
|
static LIST_HEAD(script_descs);
|
2009-12-15 08:53:38 +00:00
|
|
|
|
|
|
|
static struct script_desc *script_desc__new(const char *name)
|
|
|
|
{
|
|
|
|
struct script_desc *s = zalloc(sizeof(*s));
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (s != NULL && name)
|
2009-12-15 08:53:38 +00:00
|
|
|
s->name = strdup(name);
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void script_desc__delete(struct script_desc *s)
|
|
|
|
{
|
2013-12-27 19:55:14 +00:00
|
|
|
zfree(&s->name);
|
|
|
|
zfree(&s->half_liner);
|
|
|
|
zfree(&s->args);
|
2009-12-15 08:53:38 +00:00
|
|
|
free(s);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void script_desc__add(struct script_desc *s)
|
|
|
|
{
|
|
|
|
list_add_tail(&s->node, &script_descs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct script_desc *script_desc__find(const char *name)
|
|
|
|
{
|
|
|
|
struct script_desc *s;
|
|
|
|
|
|
|
|
list_for_each_entry(s, &script_descs, node)
|
|
|
|
if (strcasecmp(s->name, name) == 0)
|
|
|
|
return s;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct script_desc *script_desc__findnew(const char *name)
|
|
|
|
{
|
|
|
|
struct script_desc *s = script_desc__find(name);
|
|
|
|
|
|
|
|
if (s)
|
|
|
|
return s;
|
|
|
|
|
|
|
|
s = script_desc__new(name);
|
|
|
|
if (!s)
|
2017-07-22 07:36:10 +00:00
|
|
|
return NULL;
|
2009-12-15 08:53:38 +00:00
|
|
|
|
|
|
|
script_desc__add(s);
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
2010-12-03 15:52:01 +00:00
|
|
|
static const char *ends_with(const char *str, const char *suffix)
|
2009-12-15 08:53:38 +00:00
|
|
|
{
|
|
|
|
size_t suffix_len = strlen(suffix);
|
2010-12-03 15:52:01 +00:00
|
|
|
const char *p = str;
|
2009-12-15 08:53:38 +00:00
|
|
|
|
|
|
|
if (strlen(str) > suffix_len) {
|
|
|
|
p = str + strlen(str) - suffix_len;
|
|
|
|
if (!strncmp(p, suffix, suffix_len))
|
|
|
|
return p;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int read_script_info(struct script_desc *desc, const char *filename)
|
|
|
|
{
|
|
|
|
char line[BUFSIZ], *p;
|
|
|
|
FILE *fp;
|
|
|
|
|
|
|
|
fp = fopen(filename, "r");
|
|
|
|
if (!fp)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
while (fgets(line, sizeof(line), fp)) {
|
|
|
|
p = ltrim(line);
|
|
|
|
if (strlen(p) == 0)
|
|
|
|
continue;
|
|
|
|
if (*p != '#')
|
|
|
|
continue;
|
|
|
|
p++;
|
|
|
|
if (strlen(p) && *p == '!')
|
|
|
|
continue;
|
|
|
|
|
|
|
|
p = ltrim(p);
|
|
|
|
if (strlen(p) && p[strlen(p) - 1] == '\n')
|
|
|
|
p[strlen(p) - 1] = '\0';
|
|
|
|
|
|
|
|
if (!strncmp(p, "description:", strlen("description:"))) {
|
|
|
|
p += strlen("description:");
|
|
|
|
desc->half_liner = strdup(ltrim(p));
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!strncmp(p, "args:", strlen("args:"))) {
|
|
|
|
p += strlen("args:");
|
|
|
|
desc->args = strdup(ltrim(p));
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
fclose(fp);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-11-25 10:38:40 +00:00
|
|
|
static char *get_script_root(struct dirent *script_dirent, const char *suffix)
|
|
|
|
{
|
|
|
|
char *script_root, *str;
|
|
|
|
|
|
|
|
script_root = strdup(script_dirent->d_name);
|
|
|
|
if (!script_root)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
str = (char *)ends_with(script_root, suffix);
|
|
|
|
if (!str) {
|
|
|
|
free(script_root);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
*str = '\0';
|
|
|
|
return script_root;
|
|
|
|
}
|
|
|
|
|
2012-09-10 22:15:03 +00:00
|
|
|
static int list_available_scripts(const struct option *opt __maybe_unused,
|
|
|
|
const char *s __maybe_unused,
|
|
|
|
int unset __maybe_unused)
|
2009-12-15 08:53:38 +00:00
|
|
|
{
|
2016-04-08 14:25:59 +00:00
|
|
|
struct dirent *script_dirent, *lang_dirent;
|
2009-12-15 08:53:38 +00:00
|
|
|
char scripts_path[MAXPATHLEN];
|
|
|
|
DIR *scripts_dir, *lang_dir;
|
|
|
|
char script_path[MAXPATHLEN];
|
|
|
|
char lang_path[MAXPATHLEN];
|
|
|
|
struct script_desc *desc;
|
|
|
|
char first_half[BUFSIZ];
|
|
|
|
char *script_root;
|
|
|
|
|
2015-12-15 15:39:37 +00:00
|
|
|
snprintf(scripts_path, MAXPATHLEN, "%s/scripts", get_argv_exec_path());
|
2009-12-15 08:53:38 +00:00
|
|
|
|
|
|
|
scripts_dir = opendir(scripts_path);
|
2016-08-04 11:25:42 +00:00
|
|
|
if (!scripts_dir) {
|
|
|
|
fprintf(stdout,
|
|
|
|
"open(%s) failed.\n"
|
|
|
|
"Check \"PERF_EXEC_PATH\" env to set scripts dir.\n",
|
|
|
|
scripts_path);
|
|
|
|
exit(-1);
|
|
|
|
}
|
2009-12-15 08:53:38 +00:00
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_lang(scripts_path, scripts_dir, lang_dirent) {
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
|
|
|
|
lang_dirent->d_name);
|
2009-12-15 08:53:38 +00:00
|
|
|
lang_dir = opendir(lang_path);
|
|
|
|
if (!lang_dir)
|
|
|
|
continue;
|
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_script(lang_path, lang_dir, script_dirent) {
|
|
|
|
script_root = get_script_root(script_dirent, REPORT_SUFFIX);
|
2011-11-25 10:38:40 +00:00
|
|
|
if (script_root) {
|
2009-12-15 08:53:38 +00:00
|
|
|
desc = script_desc__findnew(script_root);
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(script_path, MAXPATHLEN, "%s/%s",
|
|
|
|
lang_path, script_dirent->d_name);
|
2009-12-15 08:53:38 +00:00
|
|
|
read_script_info(desc, script_path);
|
2011-11-25 10:38:40 +00:00
|
|
|
free(script_root);
|
2009-12-15 08:53:38 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stdout, "List of available trace scripts:\n");
|
|
|
|
list_for_each_entry(desc, &script_descs, node) {
|
|
|
|
sprintf(first_half, "%s %s", desc->name,
|
|
|
|
desc->args ? desc->args : "");
|
|
|
|
fprintf(stdout, " %-36s %s\n", first_half,
|
|
|
|
desc->half_liner ? desc->half_liner : "");
|
|
|
|
}
|
|
|
|
|
|
|
|
exit(0);
|
|
|
|
}
|
|
|
|
|
2012-10-30 03:56:03 +00:00
|
|
|
/*
|
|
|
|
* Some scripts specify the required events in their "xxx-record" file,
|
|
|
|
* this function will check if the events in perf.data match those
|
|
|
|
* mentioned in the "xxx-record".
|
|
|
|
*
|
|
|
|
* Fixme: All existing "xxx-record" are all in good formats "-e event ",
|
|
|
|
* which is covered well now. And new parsing code should be added to
|
|
|
|
* cover the future complexing formats like event groups etc.
|
|
|
|
*/
|
|
|
|
static int check_ev_match(char *dir_name, char *scriptname,
|
|
|
|
struct perf_session *session)
|
|
|
|
{
|
|
|
|
char filename[MAXPATHLEN], evname[128];
|
|
|
|
char line[BUFSIZ], *p;
|
|
|
|
struct perf_evsel *pos;
|
|
|
|
int match, len;
|
|
|
|
FILE *fp;
|
|
|
|
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(filename, MAXPATHLEN, "%s/bin/%s-record", dir_name, scriptname);
|
2012-10-30 03:56:03 +00:00
|
|
|
|
|
|
|
fp = fopen(filename, "r");
|
|
|
|
if (!fp)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
while (fgets(line, sizeof(line), fp)) {
|
|
|
|
p = ltrim(line);
|
|
|
|
if (*p == '#')
|
|
|
|
continue;
|
|
|
|
|
|
|
|
while (strlen(p)) {
|
|
|
|
p = strstr(p, "-e");
|
|
|
|
if (!p)
|
|
|
|
break;
|
|
|
|
|
|
|
|
p += 2;
|
|
|
|
p = ltrim(p);
|
|
|
|
len = strcspn(p, " \t");
|
|
|
|
if (!len)
|
|
|
|
break;
|
|
|
|
|
|
|
|
snprintf(evname, len + 1, "%s", p);
|
|
|
|
|
|
|
|
match = 0;
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(session->evlist, pos) {
|
2012-10-30 03:56:03 +00:00
|
|
|
if (!strcmp(perf_evsel__name(pos), evname)) {
|
|
|
|
match = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!match) {
|
|
|
|
fclose(fp);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
fclose(fp);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-09-07 08:42:26 +00:00
|
|
|
/*
|
|
|
|
* Return -1 if none is found, otherwise the actual scripts number.
|
|
|
|
*
|
|
|
|
* Currently the only user of this function is the script browser, which
|
|
|
|
* will list all statically runnable scripts, select one, execute it and
|
|
|
|
* show the output in a perf browser.
|
|
|
|
*/
|
|
|
|
int find_scripts(char **scripts_array, char **scripts_path_array)
|
|
|
|
{
|
2016-04-08 14:25:59 +00:00
|
|
|
struct dirent *script_dirent, *lang_dirent;
|
2012-10-30 03:56:03 +00:00
|
|
|
char scripts_path[MAXPATHLEN], lang_path[MAXPATHLEN];
|
2012-09-07 08:42:26 +00:00
|
|
|
DIR *scripts_dir, *lang_dir;
|
2012-10-30 03:56:03 +00:00
|
|
|
struct perf_session *session;
|
2017-01-23 21:07:59 +00:00
|
|
|
struct perf_data data = {
|
2017-01-23 21:25:41 +00:00
|
|
|
.file = {
|
|
|
|
.path = input_name,
|
|
|
|
},
|
|
|
|
.mode = PERF_DATA_MODE_READ,
|
2013-10-15 14:27:32 +00:00
|
|
|
};
|
2012-09-07 08:42:26 +00:00
|
|
|
char *temp;
|
|
|
|
int i = 0;
|
|
|
|
|
2017-01-23 21:07:59 +00:00
|
|
|
session = perf_session__new(&data, false, NULL);
|
2012-10-30 03:56:03 +00:00
|
|
|
if (!session)
|
|
|
|
return -1;
|
|
|
|
|
2015-12-15 15:39:37 +00:00
|
|
|
snprintf(scripts_path, MAXPATHLEN, "%s/scripts", get_argv_exec_path());
|
2012-09-07 08:42:26 +00:00
|
|
|
|
|
|
|
scripts_dir = opendir(scripts_path);
|
2012-10-30 03:56:03 +00:00
|
|
|
if (!scripts_dir) {
|
|
|
|
perf_session__delete(session);
|
2012-09-07 08:42:26 +00:00
|
|
|
return -1;
|
2012-10-30 03:56:03 +00:00
|
|
|
}
|
2012-09-07 08:42:26 +00:00
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_lang(scripts_path, scripts_dir, lang_dirent) {
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(lang_path, MAXPATHLEN, "%s/%s", scripts_path,
|
|
|
|
lang_dirent->d_name);
|
2018-04-09 10:26:47 +00:00
|
|
|
#ifndef HAVE_LIBPERL_SUPPORT
|
2012-09-07 08:42:26 +00:00
|
|
|
if (strstr(lang_path, "perl"))
|
|
|
|
continue;
|
|
|
|
#endif
|
2018-04-09 10:26:47 +00:00
|
|
|
#ifndef HAVE_LIBPYTHON_SUPPORT
|
2012-09-07 08:42:26 +00:00
|
|
|
if (strstr(lang_path, "python"))
|
|
|
|
continue;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
lang_dir = opendir(lang_path);
|
|
|
|
if (!lang_dir)
|
|
|
|
continue;
|
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_script(lang_path, lang_dir, script_dirent) {
|
2012-09-07 08:42:26 +00:00
|
|
|
/* Skip those real time scripts: xxxtop.p[yl] */
|
2016-04-08 14:25:59 +00:00
|
|
|
if (strstr(script_dirent->d_name, "top."))
|
2012-09-07 08:42:26 +00:00
|
|
|
continue;
|
|
|
|
sprintf(scripts_path_array[i], "%s/%s", lang_path,
|
2016-04-08 14:25:59 +00:00
|
|
|
script_dirent->d_name);
|
|
|
|
temp = strchr(script_dirent->d_name, '.');
|
2012-09-07 08:42:26 +00:00
|
|
|
snprintf(scripts_array[i],
|
2016-04-08 14:25:59 +00:00
|
|
|
(temp - script_dirent->d_name) + 1,
|
|
|
|
"%s", script_dirent->d_name);
|
2012-10-30 03:56:03 +00:00
|
|
|
|
|
|
|
if (check_ev_match(lang_path,
|
|
|
|
scripts_array[i], session))
|
|
|
|
continue;
|
|
|
|
|
2012-09-07 08:42:26 +00:00
|
|
|
i++;
|
|
|
|
}
|
2012-10-30 03:56:03 +00:00
|
|
|
closedir(lang_dir);
|
2012-09-07 08:42:26 +00:00
|
|
|
}
|
|
|
|
|
2012-10-30 03:56:03 +00:00
|
|
|
closedir(scripts_dir);
|
|
|
|
perf_session__delete(session);
|
2012-09-07 08:42:26 +00:00
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
2009-12-15 08:53:39 +00:00
|
|
|
static char *get_script_path(const char *script_root, const char *suffix)
|
|
|
|
{
|
2016-04-08 14:25:59 +00:00
|
|
|
struct dirent *script_dirent, *lang_dirent;
|
2009-12-15 08:53:39 +00:00
|
|
|
char scripts_path[MAXPATHLEN];
|
|
|
|
char script_path[MAXPATHLEN];
|
|
|
|
DIR *scripts_dir, *lang_dir;
|
|
|
|
char lang_path[MAXPATHLEN];
|
2011-11-25 10:38:40 +00:00
|
|
|
char *__script_root;
|
2009-12-15 08:53:39 +00:00
|
|
|
|
2015-12-15 15:39:37 +00:00
|
|
|
snprintf(scripts_path, MAXPATHLEN, "%s/scripts", get_argv_exec_path());
|
2009-12-15 08:53:39 +00:00
|
|
|
|
|
|
|
scripts_dir = opendir(scripts_path);
|
|
|
|
if (!scripts_dir)
|
|
|
|
return NULL;
|
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_lang(scripts_path, scripts_dir, lang_dirent) {
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
|
|
|
|
lang_dirent->d_name);
|
2009-12-15 08:53:39 +00:00
|
|
|
lang_dir = opendir(lang_path);
|
|
|
|
if (!lang_dir)
|
|
|
|
continue;
|
|
|
|
|
2016-04-08 14:25:59 +00:00
|
|
|
for_each_script(lang_path, lang_dir, script_dirent) {
|
|
|
|
__script_root = get_script_root(script_dirent, suffix);
|
2011-11-25 10:38:40 +00:00
|
|
|
if (__script_root && !strcmp(script_root, __script_root)) {
|
|
|
|
free(__script_root);
|
2012-01-07 17:25:25 +00:00
|
|
|
closedir(lang_dir);
|
|
|
|
closedir(scripts_dir);
|
2018-03-19 08:29:01 +00:00
|
|
|
scnprintf(script_path, MAXPATHLEN, "%s/%s",
|
|
|
|
lang_path, script_dirent->d_name);
|
2011-11-25 10:38:40 +00:00
|
|
|
return strdup(script_path);
|
2009-12-15 08:53:39 +00:00
|
|
|
}
|
|
|
|
free(__script_root);
|
|
|
|
}
|
2012-01-07 17:25:25 +00:00
|
|
|
closedir(lang_dir);
|
2009-12-15 08:53:39 +00:00
|
|
|
}
|
2012-01-07 17:25:25 +00:00
|
|
|
closedir(scripts_dir);
|
2009-12-15 08:53:39 +00:00
|
|
|
|
2011-11-25 10:38:40 +00:00
|
|
|
return NULL;
|
2009-12-15 08:53:39 +00:00
|
|
|
}
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
static bool is_top_script(const char *script_path)
|
|
|
|
{
|
2010-12-03 15:52:01 +00:00
|
|
|
return ends_with(script_path, "top") == NULL ? false : true;
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int has_required_arg(char *script_path)
|
|
|
|
{
|
|
|
|
struct script_desc *desc;
|
|
|
|
int n_args = 0;
|
|
|
|
char *p;
|
|
|
|
|
|
|
|
desc = script_desc__new(NULL);
|
|
|
|
|
|
|
|
if (read_script_info(desc, script_path))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!desc->args)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
for (p = desc->args; *p; p++)
|
|
|
|
if (*p == '<')
|
|
|
|
n_args++;
|
|
|
|
out:
|
|
|
|
script_desc__delete(desc);
|
|
|
|
|
|
|
|
return n_args;
|
|
|
|
}
|
|
|
|
|
2012-10-01 18:20:58 +00:00
|
|
|
static int have_cmd(int argc, const char **argv)
|
|
|
|
{
|
|
|
|
char **__argv = malloc(sizeof(const char *) * argc);
|
|
|
|
|
|
|
|
if (!__argv) {
|
|
|
|
pr_err("malloc failed\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(__argv, argv, sizeof(const char *) * argc);
|
|
|
|
argc = parse_options(argc, (const char **)__argv, record_options,
|
|
|
|
NULL, PARSE_OPT_STOP_AT_NON_OPTION);
|
|
|
|
free(__argv);
|
2009-08-17 14:18:08 +00:00
|
|
|
|
2012-10-01 18:20:58 +00:00
|
|
|
system_wide = (argc == 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-08-13 07:17:24 +00:00
|
|
|
static void script__setup_sample_type(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_session *session = script->session;
|
|
|
|
u64 sample_type = perf_evlist__combined_sample_type(session->evlist);
|
|
|
|
|
|
|
|
if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain) {
|
|
|
|
if ((sample_type & PERF_SAMPLE_REGS_USER) &&
|
perf unwind: Do not look just at the global callchain_param.record_mode
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-15 19:48:46 +00:00
|
|
|
(sample_type & PERF_SAMPLE_STACK_USER)) {
|
2015-08-13 07:17:24 +00:00
|
|
|
callchain_param.record_mode = CALLCHAIN_DWARF;
|
perf unwind: Do not look just at the global callchain_param.record_mode
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-15 19:48:46 +00:00
|
|
|
dwarf_callchain_users = true;
|
|
|
|
} else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
|
2015-08-13 07:17:24 +00:00
|
|
|
callchain_param.record_mode = CALLCHAIN_LBR;
|
|
|
|
else
|
|
|
|
callchain_param.record_mode = CALLCHAIN_FP;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-01-05 21:09:09 +00:00
|
|
|
static int process_stat_round_event(struct perf_tool *tool __maybe_unused,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_session *session)
|
|
|
|
{
|
|
|
|
struct stat_round_event *round = &event->stat_round;
|
|
|
|
struct perf_evsel *counter;
|
|
|
|
|
2016-06-23 14:26:15 +00:00
|
|
|
evlist__for_each_entry(session->evlist, counter) {
|
2016-01-05 21:09:09 +00:00
|
|
|
perf_stat_process_counter(&stat_config, counter);
|
|
|
|
process_stat(counter, round->time);
|
|
|
|
}
|
|
|
|
|
|
|
|
process_stat_interval(round->time);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-01-05 21:09:07 +00:00
|
|
|
static int process_stat_config_event(struct perf_tool *tool __maybe_unused,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_session *session __maybe_unused)
|
|
|
|
{
|
|
|
|
perf_event__read_stat_config(&stat_config, &event->stat_config);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-01-05 21:09:06 +00:00
|
|
|
static int set_maps(struct perf_script *script)
|
|
|
|
{
|
|
|
|
struct perf_evlist *evlist = script->session->evlist;
|
|
|
|
|
|
|
|
if (!script->cpus || !script->threads)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (WARN_ONCE(script->allocated, "stats double allocation\n"))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
perf_evlist__set_maps(evlist, script->cpus, script->threads);
|
|
|
|
|
|
|
|
if (perf_evlist__alloc_stats(evlist, true))
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
script->allocated = true;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static
|
|
|
|
int process_thread_map_event(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_session *session __maybe_unused)
|
|
|
|
{
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
|
|
|
|
if (script->threads) {
|
|
|
|
pr_warning("Extra thread map event, ignoring.\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
script->threads = thread_map__new_event(&event->thread_map);
|
|
|
|
if (!script->threads)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
return set_maps(script);
|
|
|
|
}
|
|
|
|
|
|
|
|
static
|
|
|
|
int process_cpu_map_event(struct perf_tool *tool __maybe_unused,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_session *session __maybe_unused)
|
|
|
|
{
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
|
|
|
|
if (script->cpus) {
|
|
|
|
pr_warning("Extra cpu map event, ignoring.\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
script->cpus = cpu_map__new_data(&event->cpu_map.data);
|
|
|
|
if (!script->cpus)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
return set_maps(script);
|
|
|
|
}
|
|
|
|
|
2017-11-09 19:04:26 +00:00
|
|
|
#ifdef HAVE_AUXTRACE_SUPPORT
|
|
|
|
static int perf_script__process_auxtrace_info(struct perf_tool *tool,
|
|
|
|
union perf_event *event,
|
|
|
|
struct perf_session *session)
|
|
|
|
{
|
|
|
|
int ret = perf_event__process_auxtrace_info(tool, event, session);
|
|
|
|
|
|
|
|
if (ret == 0) {
|
|
|
|
struct perf_script *script = container_of(tool, struct perf_script, tool);
|
|
|
|
|
|
|
|
ret = perf_script__setup_per_event_dump(script);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define perf_script__process_auxtrace_info 0
|
|
|
|
#endif
|
|
|
|
|
2017-03-27 14:47:20 +00:00
|
|
|
int cmd_script(int argc, const char **argv)
|
2012-10-01 18:20:58 +00:00
|
|
|
{
|
|
|
|
bool show_full_info = false;
|
2013-12-09 10:02:50 +00:00
|
|
|
bool header = false;
|
|
|
|
bool header_only = false;
|
2014-08-12 06:40:33 +00:00
|
|
|
bool script_started = false;
|
2012-10-01 18:20:58 +00:00
|
|
|
char *rec_script_path = NULL;
|
|
|
|
char *rep_script_path = NULL;
|
|
|
|
struct perf_session *session;
|
2015-04-09 15:53:56 +00:00
|
|
|
struct itrace_synth_opts itrace_synth_opts = { .set = false, };
|
2012-10-01 18:20:58 +00:00
|
|
|
char *script_path = NULL;
|
|
|
|
const char **__argv;
|
2014-08-12 06:40:33 +00:00
|
|
|
int i, j, err = 0;
|
2013-10-22 07:34:07 +00:00
|
|
|
struct perf_script script = {
|
|
|
|
.tool = {
|
|
|
|
.sample = process_sample_event,
|
|
|
|
.mmap = perf_event__process_mmap,
|
|
|
|
.mmap2 = perf_event__process_mmap2,
|
|
|
|
.comm = perf_event__process_comm,
|
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:41:43 +00:00
|
|
|
.namespaces = perf_event__process_namespaces,
|
2013-10-22 07:34:07 +00:00
|
|
|
.exit = perf_event__process_exit,
|
|
|
|
.fork = perf_event__process_fork,
|
2013-11-01 13:51:30 +00:00
|
|
|
.attr = process_attr,
|
perf script: Process event update events
Andreas reported following command produces no output:
# cat test.py
#!/usr/bin/env python
def stat__krava(cpu, thread, time, val, ena, run):
print "event %s cpu %d, thread %d, time %d, val %d, ena %d, run %d" % \
("krava", cpu, thread, time, val, ena, run)
# perf stat -a -I 1000 -e cycles,"cpu/config=0x6530160,name=krava/" record | perf script -s test.py
^C
#
The reason is that 'perf script' does not process event update events and
will never get the event name update thus the python callback is never
called.
The fix is just to add already existing callback we use in 'perf stat
report'.
Committer note:
After the patch:
# perf stat -a -I 1000 -e cycles,"cpu/config=0x6530160,name=krava/" record | perf script -s test.py
event krava cpu -1, thread -1, time 1000239179, val 1789051, ena 4000690920, run 4000690920
event krava cpu -1, thread -1, time 2000479061, val 2391338, ena 4000879596, run 4000879596
event krava cpu -1, thread -1, time 3000740802, val 1939121, ena 4000977209, run 4000977209
event krava cpu -1, thread -1, time 4001006730, val 2356115, ena 4001000489, run 4001000489
^C
#
Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460013073-18444-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-07 07:11:13 +00:00
|
|
|
.event_update = perf_event__process_event_update,
|
2013-10-22 07:34:07 +00:00
|
|
|
.tracing_data = perf_event__process_tracing_data,
|
perf tools: Add feature header record to pipe-mode
Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.
For alignment, check that synthesized events don't exceed
pagesize.
Add the perf_event__synthesize_feature event call back to
process the new header records.
Before this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
After this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
# ========
# captured on: Mon May 22 16:33:43 2017
# ========
#
# hostname : my_hostname
# os release : 4.11.0-dbx-up_perf
# perf version : 4.11.rc6.g6277c80
# arch : x86_64
# nrcpus online : 72
# nrcpus avail : 72
# cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
# cpuid : GenuineIntel,6,63,2
# total memory : 263457192 kB
# cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 04:25:48 +00:00
|
|
|
.feature = perf_event__process_feature,
|
2013-10-22 07:34:07 +00:00
|
|
|
.build_id = perf_event__process_build_id,
|
2015-04-09 15:53:56 +00:00
|
|
|
.id_index = perf_event__process_id_index,
|
2017-11-09 19:04:26 +00:00
|
|
|
.auxtrace_info = perf_script__process_auxtrace_info,
|
2015-04-09 15:53:56 +00:00
|
|
|
.auxtrace = perf_event__process_auxtrace,
|
|
|
|
.auxtrace_error = perf_event__process_auxtrace_error,
|
2016-01-05 21:09:09 +00:00
|
|
|
.stat = perf_event__process_stat_event,
|
|
|
|
.stat_round = process_stat_round_event,
|
2016-01-05 21:09:07 +00:00
|
|
|
.stat_config = process_stat_config_event,
|
2016-01-05 21:09:06 +00:00
|
|
|
.thread_map = process_thread_map_event,
|
|
|
|
.cpu_map = process_cpu_map_event,
|
2014-07-06 12:18:21 +00:00
|
|
|
.ordered_events = true,
|
2013-10-22 07:34:07 +00:00
|
|
|
.ordering_requires_timestamps = true,
|
|
|
|
},
|
|
|
|
};
|
2017-01-23 21:07:59 +00:00
|
|
|
struct perf_data data = {
|
perf script: Support using -f to override perf.data file ownership
Enable perf script to use perf.data when it is not owned by current user
or root. Change the short option name of --fields to -F to avoid confusion
with --force.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28360 Apr 2 14:53 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
Error: switch `f' requires a value
usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-f, --fields <str> comma separated output fields prepend with
'type:'. Valid types: hw,sw,trace,raw. Fields:
comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period
As shown above, the -f option does not work at all. And -f is already
taken up by --fields, which makes --force confused, so change the short
option name of --fields to -F like what other perf commands do (e.g.
perf report -F) and use -f as the short option name of --force.
After this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
:41298 41298 2590086.564226: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564244: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564249: 7 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564255: 176 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
ls 41298 2590086.567346: 4059 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567353: 3717 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567358: 63058 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567448: 1706255 cycles: 406ae0
[unknown] (/usr/bin/ls)
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:47:16 +00:00
|
|
|
.mode = PERF_DATA_MODE_READ,
|
|
|
|
};
|
2012-10-01 18:20:58 +00:00
|
|
|
const struct option options[] = {
|
2009-08-17 14:18:08 +00:00
|
|
|
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
|
|
|
|
"dump raw trace in ASCII"),
|
2010-04-13 08:37:33 +00:00
|
|
|
OPT_INCR('v', "verbose", &verbose,
|
2012-10-01 18:20:58 +00:00
|
|
|
"be more verbose (show symbol address, etc)"),
|
2009-12-15 08:53:38 +00:00
|
|
|
OPT_BOOLEAN('L', "Latency", &latency_format,
|
2009-10-14 19:43:42 +00:00
|
|
|
"show latency attributes (irqs/preemption disabled, etc)"),
|
2009-12-15 08:53:38 +00:00
|
|
|
OPT_CALLBACK_NOOPT('l', "list", NULL, NULL, "list available scripts",
|
|
|
|
list_available_scripts),
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
OPT_CALLBACK('s', "script", NULL, "name",
|
|
|
|
"script file name (lang:script name, script name, or *)",
|
|
|
|
parse_scriptname),
|
|
|
|
OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
|
2010-11-16 17:45:39 +00:00
|
|
|
"generate perf-script.xx script in specified language"),
|
2012-10-01 18:20:58 +00:00
|
|
|
OPT_STRING('i', "input", &input_name, "file", "input file name"),
|
2010-05-27 14:27:47 +00:00
|
|
|
OPT_BOOLEAN('d', "debug-mode", &debug_mode,
|
|
|
|
"do various checks like samples ordering and lost events"),
|
2013-12-09 10:02:50 +00:00
|
|
|
OPT_BOOLEAN(0, "header", &header, "Show data header."),
|
|
|
|
OPT_BOOLEAN(0, "header-only", &header_only, "Show only data header."),
|
2011-03-10 05:23:27 +00:00
|
|
|
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
|
|
|
|
"file", "vmlinux pathname"),
|
|
|
|
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
|
|
|
|
"file", "kallsyms pathname"),
|
|
|
|
OPT_BOOLEAN('G', "hide-call-graph", &no_callchain,
|
|
|
|
"When printing symbols do not display call chain"),
|
2016-05-19 11:47:37 +00:00
|
|
|
OPT_CALLBACK(0, "symfs", NULL, "directory",
|
|
|
|
"Look for files with symbols relative to this directory",
|
|
|
|
symbol__config_symfs),
|
perf script: Support using -f to override perf.data file ownership
Enable perf script to use perf.data when it is not owned by current user
or root. Change the short option name of --fields to -F to avoid confusion
with --force.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28360 Apr 2 14:53 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
Error: switch `f' requires a value
usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-f, --fields <str> comma separated output fields prepend with
'type:'. Valid types: hw,sw,trace,raw. Fields:
comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period
As shown above, the -f option does not work at all. And -f is already
taken up by --fields, which makes --force confused, so change the short
option name of --fields to -F like what other perf commands do (e.g.
perf report -F) and use -f as the short option name of --force.
After this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
:41298 41298 2590086.564226: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564244: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564249: 7 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564255: 176 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
ls 41298 2590086.567346: 4059 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567353: 3717 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567358: 63058 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567448: 1706255 cycles: 406ae0
[unknown] (/usr/bin/ls)
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:47:16 +00:00
|
|
|
OPT_CALLBACK('F', "fields", NULL, "str",
|
2012-01-30 04:43:15 +00:00
|
|
|
"comma separated output fields prepend with 'type:'. "
|
perf script: Allow adding and removing fields
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 15:48:10 +00:00
|
|
|
"+field to add and -field to remove."
|
2017-06-21 10:17:19 +00:00
|
|
|
"Valid types: hw,sw,trace,raw,synth. "
|
2012-01-30 04:43:15 +00:00
|
|
|
"Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,"
|
2017-09-05 18:40:57 +00:00
|
|
|
"addr,symoff,period,iregs,uregs,brstack,brstacksym,flags,"
|
2017-08-29 17:11:11 +00:00
|
|
|
"bpf-output,callindent,insn,insnlen,brstackinsn,synth,phys_addr",
|
2017-02-23 23:46:34 +00:00
|
|
|
parse_output_fields),
|
2011-11-25 14:05:25 +00:00
|
|
|
OPT_BOOLEAN('a', "all-cpus", &system_wide,
|
2012-10-01 18:20:58 +00:00
|
|
|
"system-wide collection from all CPUs"),
|
2012-09-07 08:42:24 +00:00
|
|
|
OPT_STRING('S', "symbols", &symbol_conf.sym_list_str, "symbol[,symbol...]",
|
|
|
|
"only consider these symbols"),
|
2016-11-25 20:00:21 +00:00
|
|
|
OPT_STRING(0, "stop-bt", &symbol_conf.bt_stop_list_str, "symbol[,symbol...]",
|
|
|
|
"Stop display of callgraph at these symbols"),
|
2011-11-13 18:30:08 +00:00
|
|
|
OPT_STRING('C', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
|
2011-11-21 17:02:52 +00:00
|
|
|
OPT_STRING('c', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
|
|
|
|
"only display events for these comms"),
|
2015-03-24 15:52:41 +00:00
|
|
|
OPT_STRING(0, "pid", &symbol_conf.pid_list_str, "pid[,pid...]",
|
|
|
|
"only consider symbols in these pids"),
|
|
|
|
OPT_STRING(0, "tid", &symbol_conf.tid_list_str, "tid[,tid...]",
|
|
|
|
"only consider symbols in these tids"),
|
2016-04-14 21:15:18 +00:00
|
|
|
OPT_UINTEGER(0, "max-stack", &scripting_max_stack,
|
|
|
|
"Set the maximum stack depth when parsing the callchain, "
|
|
|
|
"anything beyond the specified depth will be ignored. "
|
2016-04-27 13:16:24 +00:00
|
|
|
"Default: kernel.perf_event_max_stack or " __stringify(PERF_MAX_STACK_DEPTH)),
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
OPT_BOOLEAN('I', "show-info", &show_full_info,
|
|
|
|
"display extended information from perf.data file"),
|
2012-01-30 04:43:20 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-kernel-path", &symbol_conf.show_kernel_path,
|
|
|
|
"Show the path of [kernel.kallsyms]"),
|
2013-11-26 08:51:12 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-task-events", &script.show_task_events,
|
|
|
|
"Show the fork/comm/exit events"),
|
2013-11-26 08:54:26 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-mmap-events", &script.show_mmap_events,
|
|
|
|
"Show the mmap events"),
|
2015-07-21 09:44:06 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-switch-events", &script.show_switch_events,
|
|
|
|
"Show context switch events (if recorded)"),
|
perf script: Add script print support for namespace events
Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.
Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.
$ perf script --show-namespace-events
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
[0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
Commiter notes:
Testing it:
Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...
# perf script --show-task --show-namespace
<SNIP>
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154
perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155
perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)
<SNIP>
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:42:06 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-namespace-events", &script.show_namespace_events,
|
|
|
|
"Show namespace events (if recorded)"),
|
2018-01-07 16:03:53 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-lost-events", &script.show_lost_events,
|
|
|
|
"Show lost events (if recorded)"),
|
2018-02-06 18:17:59 +00:00
|
|
|
OPT_BOOLEAN('\0', "show-round-events", &script.show_round_events,
|
|
|
|
"Show round events (if recorded)"),
|
2017-10-26 13:30:20 +00:00
|
|
|
OPT_BOOLEAN('\0', "per-event-dump", &script.per_event_dump,
|
|
|
|
"Dump trace output to files named by the monitored events"),
|
2017-01-13 18:25:27 +00:00
|
|
|
OPT_BOOLEAN('f', "force", &symbol_conf.force, "don't complain, do it"),
|
2017-02-23 23:46:34 +00:00
|
|
|
OPT_INTEGER(0, "max-blocks", &max_blocks,
|
|
|
|
"Maximum number of code blocks to dump with brstackinsn"),
|
2015-09-25 13:15:36 +00:00
|
|
|
OPT_BOOLEAN(0, "ns", &nanosecs,
|
|
|
|
"Use 9 decimal places when displaying time"),
|
2015-04-09 15:53:56 +00:00
|
|
|
OPT_CALLBACK_OPTARG(0, "itrace", &itrace_synth_opts, NULL, "opts",
|
|
|
|
"Instruction Tracing options",
|
|
|
|
itrace_parse_synth_opts),
|
2015-08-07 22:24:05 +00:00
|
|
|
OPT_BOOLEAN(0, "full-source-path", &srcline_full_filename,
|
|
|
|
"Show full source file name path for source lines"),
|
2015-08-26 19:18:15 +00:00
|
|
|
OPT_BOOLEAN(0, "demangle", &symbol_conf.demangle,
|
|
|
|
"Enable symbol demangling"),
|
|
|
|
OPT_BOOLEAN(0, "demangle-kernel", &symbol_conf.demangle_kernel,
|
|
|
|
"Enable kernel symbol demangling"),
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
OPT_STRING(0, "time", &script.time_str, "str",
|
|
|
|
"Time span of interest (start,stop)"),
|
perf script: Add --inline option for debugging
The --inline option is to show inlined functions in callchains.
For example:
$ perf script
a.out 5644 11611.467597: 309961 cycles:u:
790 main (/home/namhyung/tmp/perf/a.out)
20511 __libc_start_main (/usr/lib/libc-2.25.so)
8ba _start (/home/namhyung/tmp/perf/a.out)
...
$ perf script --inline
a.out 5644 11611.467597: 309961 cycles:u:
790 main (/home/namhyung/tmp/perf/a.out)
std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()
std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
main
20511 __libc_start_main (/usr/lib/libc-2.25.so)
8ba _start (/home/namhyung/tmp/perf/a.out)
...
Reviewed-and-tested-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-5-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-24 06:21:26 +00:00
|
|
|
OPT_BOOLEAN(0, "inline", &symbol_conf.inline_name,
|
|
|
|
"Show inline function"),
|
2009-08-21 18:56:03 +00:00
|
|
|
OPT_END()
|
2012-10-01 18:20:58 +00:00
|
|
|
};
|
2015-03-18 13:35:54 +00:00
|
|
|
const char * const script_subcommands[] = { "record", "report", NULL };
|
|
|
|
const char *script_usage[] = {
|
2012-10-01 18:20:58 +00:00
|
|
|
"perf script [<options>]",
|
|
|
|
"perf script [<options>] record <script> [<record-options>] <command>",
|
|
|
|
"perf script [<options>] report <script> [script-args]",
|
|
|
|
"perf script [<options>] <script> [<record-options>] <command>",
|
|
|
|
"perf script [<options>] <top-script> [script-args]",
|
|
|
|
NULL
|
|
|
|
};
|
2009-12-15 08:53:39 +00:00
|
|
|
|
2017-04-04 16:15:04 +00:00
|
|
|
perf_set_singlethreaded();
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
setup_scripting();
|
|
|
|
|
2015-03-18 13:35:54 +00:00
|
|
|
argc = parse_options_subcommand(argc, argv, options, script_subcommands, script_usage,
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
PARSE_OPT_STOP_AT_NON_OPTION);
|
|
|
|
|
2017-01-23 21:25:41 +00:00
|
|
|
data.file.path = input_name;
|
|
|
|
data.force = symbol_conf.force;
|
2013-10-15 14:27:32 +00:00
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) {
|
|
|
|
rec_script_path = get_script_path(argv[1], RECORD_SUFFIX);
|
|
|
|
if (!rec_script_path)
|
2017-03-27 14:47:20 +00:00
|
|
|
return cmd_record(argc, argv);
|
2009-12-15 08:53:39 +00:00
|
|
|
}
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (argc > 1 && !strncmp(argv[0], "rep", strlen("rep"))) {
|
|
|
|
rep_script_path = get_script_path(argv[1], REPORT_SUFFIX);
|
|
|
|
if (!rep_script_path) {
|
2009-12-15 08:53:39 +00:00
|
|
|
fprintf(stderr,
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
"Please specify a valid report script"
|
2010-11-16 17:45:39 +00:00
|
|
|
"(see 'perf script -l' for listing)\n");
|
2009-12-15 08:53:39 +00:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-09-25 13:15:51 +00:00
|
|
|
if (itrace_synth_opts.callchain &&
|
|
|
|
itrace_synth_opts.callchain_sz > scripting_max_stack)
|
|
|
|
scripting_max_stack = itrace_synth_opts.callchain_sz;
|
|
|
|
|
2010-10-10 15:10:03 +00:00
|
|
|
/* make sure PERF_EXEC_PATH is set for scripts */
|
2015-12-15 15:39:37 +00:00
|
|
|
set_argv_exec_path(get_argv_exec_path());
|
2010-10-10 15:10:03 +00:00
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (argc && !script_name && !rec_script_path && !rep_script_path) {
|
2010-04-02 04:59:25 +00:00
|
|
|
int live_pipe[2];
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
int rep_args;
|
2010-04-02 04:59:25 +00:00
|
|
|
pid_t pid;
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
rec_script_path = get_script_path(argv[0], RECORD_SUFFIX);
|
|
|
|
rep_script_path = get_script_path(argv[0], REPORT_SUFFIX);
|
|
|
|
|
|
|
|
if (!rec_script_path && !rep_script_path) {
|
2015-10-24 15:49:27 +00:00
|
|
|
usage_with_options_msg(script_usage, options,
|
|
|
|
"Couldn't find script `%s'\n\n See perf"
|
2010-11-16 17:45:39 +00:00
|
|
|
" script -l for available scripts.\n", argv[0]);
|
2010-04-02 04:59:25 +00:00
|
|
|
}
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (is_top_script(argv[0])) {
|
|
|
|
rep_args = argc - 1;
|
|
|
|
} else {
|
|
|
|
int rec_args;
|
|
|
|
|
|
|
|
rep_args = has_required_arg(rep_script_path);
|
|
|
|
rec_args = (argc - 1) - rep_args;
|
|
|
|
if (rec_args < 0) {
|
2015-10-24 15:49:27 +00:00
|
|
|
usage_with_options_msg(script_usage, options,
|
|
|
|
"`%s' script requires options."
|
2010-11-16 17:45:39 +00:00
|
|
|
"\n\n See perf script -l for available "
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
"scripts and options.\n", argv[0]);
|
|
|
|
}
|
2010-04-02 04:59:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (pipe(live_pipe) < 0) {
|
|
|
|
perror("failed to create pipe");
|
2012-08-26 18:24:46 +00:00
|
|
|
return -1;
|
2010-04-02 04:59:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
pid = fork();
|
|
|
|
if (pid < 0) {
|
|
|
|
perror("failed to fork");
|
2012-08-26 18:24:46 +00:00
|
|
|
return -1;
|
2010-04-02 04:59:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!pid) {
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
j = 0;
|
|
|
|
|
2010-04-02 04:59:25 +00:00
|
|
|
dup2(live_pipe[1], 1);
|
|
|
|
close(live_pipe[0]);
|
|
|
|
|
2011-11-25 14:05:25 +00:00
|
|
|
if (is_top_script(argv[0])) {
|
|
|
|
system_wide = true;
|
|
|
|
} else if (!system_wide) {
|
2012-08-26 18:24:46 +00:00
|
|
|
if (have_cmd(argc - rep_args, &argv[rep_args]) != 0) {
|
|
|
|
err = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
2011-11-25 14:05:25 +00:00
|
|
|
}
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
|
|
|
|
__argv = malloc((argc + 6) * sizeof(const char *));
|
2012-08-26 18:24:46 +00:00
|
|
|
if (!__argv) {
|
|
|
|
pr_err("malloc failed\n");
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
2010-11-10 13:52:32 +00:00
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
__argv[j++] = "/bin/sh";
|
|
|
|
__argv[j++] = rec_script_path;
|
|
|
|
if (system_wide)
|
|
|
|
__argv[j++] = "-a";
|
|
|
|
__argv[j++] = "-q";
|
|
|
|
__argv[j++] = "-o";
|
|
|
|
__argv[j++] = "-";
|
|
|
|
for (i = rep_args + 1; i < argc; i++)
|
|
|
|
__argv[j++] = argv[i];
|
|
|
|
__argv[j++] = NULL;
|
2010-04-02 04:59:25 +00:00
|
|
|
|
|
|
|
execvp("/bin/sh", (char **)__argv);
|
2010-11-10 13:52:32 +00:00
|
|
|
free(__argv);
|
2010-04-02 04:59:25 +00:00
|
|
|
exit(-1);
|
|
|
|
}
|
|
|
|
|
|
|
|
dup2(live_pipe[0], 0);
|
|
|
|
close(live_pipe[1]);
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
__argv = malloc((argc + 4) * sizeof(const char *));
|
2012-08-26 18:24:46 +00:00
|
|
|
if (!__argv) {
|
|
|
|
pr_err("malloc failed\n");
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
j = 0;
|
|
|
|
__argv[j++] = "/bin/sh";
|
|
|
|
__argv[j++] = rep_script_path;
|
|
|
|
for (i = 1; i < rep_args + 1; i++)
|
|
|
|
__argv[j++] = argv[i];
|
|
|
|
__argv[j++] = "-i";
|
|
|
|
__argv[j++] = "-";
|
|
|
|
__argv[j++] = NULL;
|
2010-04-02 04:59:25 +00:00
|
|
|
|
|
|
|
execvp("/bin/sh", (char **)__argv);
|
2010-11-10 13:52:32 +00:00
|
|
|
free(__argv);
|
2010-04-02 04:59:25 +00:00
|
|
|
exit(-1);
|
|
|
|
}
|
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (rec_script_path)
|
|
|
|
script_path = rec_script_path;
|
|
|
|
if (rep_script_path)
|
|
|
|
script_path = rep_script_path;
|
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:15:43 +00:00
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
if (script_path) {
|
|
|
|
j = 0;
|
2009-12-15 08:53:39 +00:00
|
|
|
|
2011-11-25 14:05:25 +00:00
|
|
|
if (!rec_script_path)
|
|
|
|
system_wide = false;
|
2012-08-26 18:24:46 +00:00
|
|
|
else if (!system_wide) {
|
|
|
|
if (have_cmd(argc - 1, &argv[1]) != 0) {
|
|
|
|
err = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:15:43 +00:00
|
|
|
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
__argv = malloc((argc + 2) * sizeof(const char *));
|
2012-08-26 18:24:46 +00:00
|
|
|
if (!__argv) {
|
|
|
|
pr_err("malloc failed\n");
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:15:43 +00:00
|
|
|
__argv[j++] = "/bin/sh";
|
|
|
|
__argv[j++] = script_path;
|
|
|
|
if (system_wide)
|
|
|
|
__argv[j++] = "-a";
|
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:16:51 +00:00
|
|
|
for (i = 2; i < argc; i++)
|
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 14:15:43 +00:00
|
|
|
__argv[j++] = argv[i];
|
|
|
|
__argv[j++] = NULL;
|
2009-12-15 08:53:39 +00:00
|
|
|
|
|
|
|
execvp("/bin/sh", (char **)__argv);
|
2010-11-10 13:52:32 +00:00
|
|
|
free(__argv);
|
2009-12-15 08:53:39 +00:00
|
|
|
exit(-1);
|
|
|
|
}
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
2010-03-03 07:04:33 +00:00
|
|
|
if (!script_name)
|
|
|
|
setup_pager();
|
2009-08-17 14:18:08 +00:00
|
|
|
|
2017-01-23 21:07:59 +00:00
|
|
|
session = perf_session__new(&data, false, &script.tool);
|
2009-12-13 21:50:24 +00:00
|
|
|
if (session == NULL)
|
2014-09-24 01:33:37 +00:00
|
|
|
return -1;
|
2009-12-13 21:50:24 +00:00
|
|
|
|
2013-12-09 10:02:50 +00:00
|
|
|
if (header || header_only) {
|
2017-07-18 04:25:47 +00:00
|
|
|
script.tool.show_feat_hdr = SHOW_FEAT_HEADER;
|
2013-12-09 10:02:50 +00:00
|
|
|
perf_session__fprintf_info(session, stdout, show_full_info);
|
|
|
|
if (header_only)
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
2013-12-09 10:02:50 +00:00
|
|
|
}
|
2017-07-18 04:25:47 +00:00
|
|
|
if (show_full_info)
|
|
|
|
script.tool.show_feat_hdr = SHOW_FEAT_HEADER_FULL_INFO;
|
2013-12-09 10:02:50 +00:00
|
|
|
|
2014-08-12 06:40:45 +00:00
|
|
|
if (symbol__init(&session->header.env) < 0)
|
2014-08-12 06:40:42 +00:00
|
|
|
goto out_delete;
|
|
|
|
|
2013-10-22 07:34:07 +00:00
|
|
|
script.session = session;
|
2015-08-13 07:17:24 +00:00
|
|
|
script__setup_sample_type(&script);
|
2013-10-22 07:34:07 +00:00
|
|
|
|
perf script: Add callindent option
Based on patches from Andi Kleen.
When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.
We already have code to track the function call stack for PT, that we
can reuse with minor modifications.
The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.
Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.
When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.
Example output:
sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
...
swapper 0 [000] 5830.389116586: call irq_exit ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
swapper 0 [000] 5830.389116586: call idle_cpu ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
swapper 0 [000] 5830.389116586: return idle_cpu ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
swapper 0 [000] 5830.389116586: call tick_nohz_irq_exit ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
swapper 0 [000] 5830.389116919: call __tick_nohz_idle_enter ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call ktime_get ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
swapper 0 [000] 5830.389116919: call read_tsc ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
swapper 0 [000] 5830.389116919: return read_tsc ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
swapper 0 [000] 5830.389116919: return ktime_get ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
swapper 0 [000] 5830.389116919: call sched_clock_idle_sleep_event ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: call sched_clock_cpu ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
swapper 0 [000] 5830.389116919: call sched_clock ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
swapper 0 [000] 5830.389116919: call native_sched_clock ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
swapper 0 [000] 5830.389116919: return native_sched_clock ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
swapper 0 [000] 5830.389116919: return sched_clock ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
swapper 0 [000] 5830.389116919: return sched_clock_cpu ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
swapper 0 [000] 5830.389116919: return sched_clock_idle_sleep_event ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 13:40:58 +00:00
|
|
|
if (output[PERF_TYPE_HARDWARE].fields & PERF_OUTPUT_CALLINDENT)
|
|
|
|
itrace_synth_opts.thread_stack = true;
|
|
|
|
|
2015-04-09 15:53:56 +00:00
|
|
|
session->itrace_synth_opts = &itrace_synth_opts;
|
|
|
|
|
2011-07-04 11:57:50 +00:00
|
|
|
if (cpu_list) {
|
2014-08-12 06:40:33 +00:00
|
|
|
err = perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap);
|
|
|
|
if (err < 0)
|
|
|
|
goto out_delete;
|
2017-05-26 08:17:38 +00:00
|
|
|
itrace_synth_opts.cpu_bitmap = cpu_bitmap;
|
2011-07-04 11:57:50 +00:00
|
|
|
}
|
|
|
|
|
2011-03-10 05:23:28 +00:00
|
|
|
if (!no_callchain)
|
2011-03-10 05:23:27 +00:00
|
|
|
symbol_conf.use_callchain = true;
|
|
|
|
else
|
|
|
|
symbol_conf.use_callchain = false;
|
|
|
|
|
2015-08-03 19:27:40 +00:00
|
|
|
if (session->tevent.pevent &&
|
|
|
|
pevent_set_function_resolver(session->tevent.pevent,
|
2015-07-22 19:43:37 +00:00
|
|
|
machine__resolve_kernel_addr,
|
|
|
|
&session->machines.host) < 0) {
|
|
|
|
pr_err("%s: failed to set libtraceevent function resolver\n", __func__);
|
2017-09-16 06:25:37 +00:00
|
|
|
err = -1;
|
|
|
|
goto out_delete;
|
2015-07-22 19:43:37 +00:00
|
|
|
}
|
|
|
|
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
if (generate_script_lang) {
|
|
|
|
struct stat perf_stat;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
int input;
|
|
|
|
|
perf script: If type not given fields apply to all event types
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-17 16:03:21 +00:00
|
|
|
if (output_set_by_user()) {
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
fprintf(stderr,
|
|
|
|
"custom fields not supported for generated scripts");
|
2014-08-12 06:40:33 +00:00
|
|
|
err = -EINVAL;
|
|
|
|
goto out_delete;
|
perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).
Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.
Thanks to Frederic Weisbecker for detailed suggestions on this approach.
Examples (output compressed)
1. trace, default format
perf record -ga -e sched:sched_switch
perf script
swapper 0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...
2. trace, custom format
perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace <--- omitting cpu and event name
swapper 0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 05:23:26 +00:00
|
|
|
}
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
2017-01-23 21:25:41 +00:00
|
|
|
input = open(data.file.path, O_RDONLY); /* input_name */
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
if (input < 0) {
|
2014-08-12 06:40:33 +00:00
|
|
|
err = -errno;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
perror("failed to open file");
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
err = fstat(input, &perf_stat);
|
|
|
|
if (err < 0) {
|
|
|
|
perror("failed to stat file");
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!perf_stat.st_size) {
|
|
|
|
fprintf(stderr, "zero-sized file, nothing to do!\n");
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
scripting_ops = script_spec__lookup(generate_script_lang);
|
|
|
|
if (!scripting_ops) {
|
|
|
|
fprintf(stderr, "invalid language specifier");
|
2014-08-12 06:40:33 +00:00
|
|
|
err = -ENOENT;
|
|
|
|
goto out_delete;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
2013-12-03 13:09:23 +00:00
|
|
|
err = scripting_ops->generate_script(session->tevent.pevent,
|
2012-06-27 16:08:42 +00:00
|
|
|
"perf-script");
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (script_name) {
|
2009-12-15 08:53:35 +00:00
|
|
|
err = scripting_ops->start_script(script_name, argc, argv);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
if (err)
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
2010-11-16 17:45:39 +00:00
|
|
|
pr_debug("perf script started with script %s\n\n", script_name);
|
2014-08-12 06:40:33 +00:00
|
|
|
script_started = true;
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
}
|
|
|
|
|
2011-04-07 03:54:20 +00:00
|
|
|
|
|
|
|
err = perf_session__check_output_opt(session);
|
|
|
|
if (err < 0)
|
2014-08-12 06:40:33 +00:00
|
|
|
goto out_delete;
|
2011-04-07 03:54:20 +00:00
|
|
|
|
perf script: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 15:00:33 +00:00
|
|
|
script.ptime_range = perf_time__range_alloc(script.time_str,
|
|
|
|
&script.range_size);
|
|
|
|
if (!script.ptime_range) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out_delete;
|
|
|
|
}
|
|
|
|
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
/* needs to be parsed after looking up reference time */
|
2017-12-08 13:13:46 +00:00
|
|
|
if (perf_time__parse_str(script.ptime_range, script.time_str) != 0) {
|
|
|
|
if (session->evlist->first_sample_time == 0 &&
|
|
|
|
session->evlist->last_sample_time == 0) {
|
2018-01-10 15:00:27 +00:00
|
|
|
pr_err("HINT: no first/last sample time found in perf data.\n"
|
|
|
|
"Please use latest perf binary to execute 'perf record'\n"
|
|
|
|
"(if '--buildid-all' is enabled, please set '--timestamp-boundary').\n");
|
2017-12-08 13:13:46 +00:00
|
|
|
err = -EINVAL;
|
|
|
|
goto out_delete;
|
|
|
|
}
|
|
|
|
|
|
|
|
script.range_num = perf_time__percent_parse_str(
|
perf script: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 15:00:33 +00:00
|
|
|
script.ptime_range, script.range_size,
|
2017-12-08 13:13:46 +00:00
|
|
|
script.time_str,
|
|
|
|
session->evlist->first_sample_time,
|
|
|
|
session->evlist->last_sample_time);
|
|
|
|
|
|
|
|
if (script.range_num < 0) {
|
|
|
|
pr_err("Invalid time string\n");
|
|
|
|
err = -EINVAL;
|
|
|
|
goto out_delete;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
script.range_num = 1;
|
perf script: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.
Committer notes:
Testing it:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
# perf script --hide-call-graph | head -15
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
#
# perf script --hide-call-graph --time ,9693.370048
swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
# perf script --hide-call-graph --time 9693.370064,9693.370076
swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 17:15:43 +00:00
|
|
|
}
|
|
|
|
|
2013-10-22 07:34:07 +00:00
|
|
|
err = __cmd_script(&script);
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
|
2014-08-15 19:08:37 +00:00
|
|
|
flush_scripting();
|
|
|
|
|
2014-08-12 06:40:33 +00:00
|
|
|
out_delete:
|
perf script: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 15:00:33 +00:00
|
|
|
zfree(&script.ptime_range);
|
|
|
|
|
2016-01-05 21:09:06 +00:00
|
|
|
perf_evlist__free_stats(session->evlist);
|
2009-12-13 21:50:24 +00:00
|
|
|
perf_session__delete(session);
|
2014-08-12 06:40:33 +00:00
|
|
|
|
|
|
|
if (script_started)
|
|
|
|
cleanup_scripting();
|
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
|
|
|
out:
|
|
|
|
return err;
|
2009-08-17 14:18:08 +00:00
|
|
|
}
|