leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0ed5f7356d
linux/fs/xfs/libxfs/xfs_refcount_btree.h

71 lines
2.1 KiB
C
Raw Normal View History

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 02:42:14 +00:00
// SPDX-License-Identifier: GPL-2.0+
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:18 +00:00
/*
* Copyright (C) 2016 Oracle. All Rights Reserved.
* Author: Darrick J. Wong <darrick.wong@oracle.com>
*/
#ifndef __XFS_REFCOUNT_BTREE_H__
#define __XFS_REFCOUNT_BTREE_H__
/*
* Reference Count Btree on-disk structures
*/
struct xfs_buf;
struct xfs_btree_cur;
struct xfs_mount;
xfs: push perags through the ag reservation callouts We currently pass an agno from the AG reservation functions to the individual feature accounting functions, which in future may have to do perag lookups to access per-AG state. Instead, pre-emptively plumb the perag through from the highest AG reservation layer to the feature callouts so they won't have to look it up again. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-06-02 00:48:24 +00:00
struct xfs_perag;
xfs: add support for refcount btree staging cursors Add support for btree staging cursors for the refcount btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-03-11 18:09:06 +00:00
struct xbtree_afakeroot;
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:18 +00:00
/*
* Btree block header size
*/
#define XFS_REFCOUNT_BLOCK_LEN XFS_BTREE_SBLOCK_CRC_LEN
/*
* Record, key, and pointer address macros for btree blocks.
*
* (note that some of these may appear unused, but they are used in userspace)
*/
#define XFS_REFCOUNT_REC_ADDR(block, index) \
((struct xfs_refcount_rec *) \
((char *)(block) + \
XFS_REFCOUNT_BLOCK_LEN + \
(((index) - 1) * sizeof(struct xfs_refcount_rec))))
#define XFS_REFCOUNT_KEY_ADDR(block, index) \
((struct xfs_refcount_key *) \
((char *)(block) + \
XFS_REFCOUNT_BLOCK_LEN + \
((index) - 1) * sizeof(struct xfs_refcount_key)))
#define XFS_REFCOUNT_PTR_ADDR(block, index, maxrecs) \
((xfs_refcount_ptr_t *) \
((char *)(block) + \
XFS_REFCOUNT_BLOCK_LEN + \
(maxrecs) * sizeof(struct xfs_refcount_key) + \
((index) - 1) * sizeof(xfs_refcount_ptr_t)))
extern struct xfs_btree_cur *xfs_refcountbt_init_cursor(struct xfs_mount *mp,
xfs: remove unused btree cursor bc_private.a.dfops field The xfs_btree_cur.bc_private.a.dfops field is only ever initialized by the refcountbt cursor init function. The only caller of that function with a non-NULL dfops is from deferred completion context, which already has attached to ->t_dfops. In addition to that, the only actual reference of a.dfops is the cursor duplication function, which means the field is effectively unused. Remove the dfops field from the bc_private.a union. Any future users can acquire the dfops from the transaction. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-12 05:26:17 +00:00
struct xfs_trans *tp, struct xfs_buf *agbp,
xfs: convert refcount btree cursor to use perags Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02 00:48:24 +00:00
struct xfs_perag *pag);
xfs: add support for refcount btree staging cursors Add support for btree staging cursors for the refcount btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-03-11 18:09:06 +00:00
struct xfs_btree_cur *xfs_refcountbt_stage_cursor(struct xfs_mount *mp,
xfs: convert refcount btree cursor to use perags Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02 00:48:24 +00:00
struct xbtree_afakeroot *afake, struct xfs_perag *pag);
xfs: non-scrub - remove unused function parameters Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-06 17:09:42 +00:00
extern int xfs_refcountbt_maxrecs(int blocklen, bool leaf);
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:18 +00:00
extern void xfs_refcountbt_compute_maxlevels(struct xfs_mount *mp);
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:44 +00:00
extern xfs_extlen_t xfs_refcountbt_calc_size(struct xfs_mount *mp,
unsigned long long len);
xfs: use the actual AG length when reserving blocks We need to use the actual AG length when making per-AG reservations, since we could otherwise end up reserving more blocks out of the last AG than there are actual blocks. Complained-about-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-01-04 02:39:33 +00:00
extern xfs_extlen_t xfs_refcountbt_max_size(struct xfs_mount *mp,
xfs_agblock_t agblocks);
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:44 +00:00
extern int xfs_refcountbt_calc_reserves(struct xfs_mount *mp,
xfs: push perags through the ag reservation callouts We currently pass an agno from the AG reservation functions to the individual feature accounting functions, which in future may have to do perag lookups to access per-AG state. Instead, pre-emptively plumb the perag through from the highest AG reservation layer to the feature callouts so they won't have to look it up again. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-06-02 00:48:24 +00:00
struct xfs_trans *tp, struct xfs_perag *pag, xfs_extlen_t *ask,
xfs: pass transaction lock while setting up agresv on cyclic metadata Pass a tranaction pointer through to all helpers that calculate the per-AG block reservation. Online repair will use this to reinitialize per-ag reservations while it still holds all the AG headers locked to the repair transaction. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-07-30 05:37:08 +00:00
xfs_extlen_t *used);
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:44 +00:00
xfs: add support for refcount btree staging cursors Add support for btree staging cursors for the refcount btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-03-11 18:09:06 +00:00
void xfs_refcountbt_commit_staged_btree(struct xfs_btree_cur *cur,
struct xfs_trans *tp, struct xfs_buf *agbp);
xfs: compute absolute maximum nlevels for each btree type Add code for all five btree types so that we can compute the absolute maximum possible btree height for each btree type. This is a setup for the next patch, which makes every btree type have its own cursor cache. The functions are exported so that we can have xfs_db report the absolute maximum btree heights for each btree type, rather than making everyone run their own ad-hoc computations. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-09-23 17:32:06 +00:00
unsigned int xfs_refcountbt_maxlevels_ondisk(void);
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-03 16:11:18 +00:00
#endif /* __XFS_REFCOUNT_BTREE_H__ */
Reference in New Issue Copy Permalink