linux/arch/x86/lib/Makefile

27 lines
711 B
Makefile
Raw Normal View History

#
# Makefile for x86 specific library files.
#
obj-$(CONFIG_SMP) := msr.o
lib-y := delay.o
ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
lib-y += thunk_$(BITS).o
lib-y += usercopy_$(BITS).o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
lib-y += msr-reg.o
ifeq ($(CONFIG_X86_32),y)
obj-y += atomic64_32.o
lib-y += checksum_32.o
lib-y += strstr_32.o
x86: change x86 to use generic find_next_bit The versions with inline assembly are in fact slower on the machines I tested them on (in userspace) (Athlon XP 2800+, p4-like Xeon 2.8GHz, AMD Opteron 270). The i386-version needed a fix similar to 06024f21 to avoid crashing the benchmark. Benchmark using: gcc -fomit-frame-pointer -Os. For each bitmap size 1...512, for each possible bitmap with one bit set, for each possible offset: find the position of the first bit starting at offset. If you follow ;). Times include setup of the bitmap and checking of the results. Athlon Xeon Opteron 32/64bit x86-specific: 0m3.692s 0m2.820s 0m3.196s / 0m2.480s generic: 0m2.622s 0m1.662s 0m2.100s / 0m1.572s If the bitmap size is not a multiple of BITS_PER_LONG, and no set (cleared) bit is found, find_next_bit (find_next_zero_bit) returns a value outside of the range [0, size]. The generic version always returns exactly size. The generic version also uses unsigned long everywhere, while the x86 versions use a mishmash of int, unsigned (int), long and unsigned long. Using the generic version does give a slightly bigger kernel, though. defconfig: text data bss dec hex filename x86-specific: 4738555 481232 626688 5846475 5935cb vmlinux (32 bit) generic: 4738621 481232 626688 5846541 59360d vmlinux (32 bit) x86-specific: 5392395 846568 724424 6963387 6a40bb vmlinux (64 bit) generic: 5392458 846568 724424 6963450 6a40fa vmlinux (64 bit) Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-09 20:01:04 +00:00
lib-y += semaphore_32.o string_32.o
lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
else
obj-y += io_64.o iomap_copy_64.o
lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
lib-y += thunk_64.o clear_page_64.o copy_page_64.o
lib-y += memmove_64.o memset_64.o
lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o
endif