linux/drivers/net/ethernet/stmicro/stmmac/Makefile

obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
	      chain_mode.o dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o \
	      dwmac100_core.o dwmac100_dma.o enh_desc.o  norm_desc.o \
	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y)
net: add support for STMicroelectronics Ethernet controllers. This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmac Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2009-10-14 22:13:45 +00:00			`obj-$(CONFIG_STMMAC_ETH) += stmmac.o`
stmmac: add the experimental PCI support This patch adds the PCI support (as EXPERIMENTAL) this has been also tested on XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board. To support the PCI bus the main part has been reworked and both the platform and the PCI specific parts have been moved into different files. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2011-12-21 03:58:19 +00:00			`stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o`
			`stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o`
net: stmmac: add Amlogic Meson glue layer The Ethernet controller available in Meson6 and Meson8 SoCs is a Synopsys DesignWare MAC IP core, already supported by the stmmac driver. This glue layer implements some platform-specific settings needed by the Amlogic variant. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-09-20 13:29:16 +00:00			`stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o`
net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's The Allwinner A20 has an ethernet controller that seems to be an early version of Synopsys DesignWare MAC 10/100/1000 Universal, which is supported by the stmmac driver. Allwinner's GMAC requires setting additional registers in the SoC's clock control unit. The exact version of the DWMAC IP that Allwinner uses is unknown, thus the exact feature set is unknown. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-01-17 13:24:47 +00:00			`stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o`
net: stmmac:sti: Add STi SOC glue driver. STi series SOCs have a glue layer on top of the synopsis gmac IP, this glue layer needs to be configured before the gmac driver starts using the IP. This patch adds a support to this glue layer which is configured via stmmac setup, init, exit callbacks. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-02-11 09:59:57 +00:00			`stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o`
net: stmmac: Add SOCFPGA glue driver Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer on top of the Synopsys gmac IP. This patch adds the platform driver for the glue layer which configures the IP before the generic STMMAC driver takes over. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-03-27 03:45:10 +00:00			`stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o`
stmmac: reorganize chain/ring modes removing Koptions Previously we had two Koptions to decide if the stmmac had to use either a ring or a chain to manage its descriptors. This patch removes the Kernel configuration options and it allow us to use the chain mode by passing a module option. Ring mode continues to be the default. Also with this patch, it will be easier to validate the driver built and guarantee that all the two modes always compile fine. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-03-26 04:43:05 +00:00			`stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \`
			`chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \`
stmmac: add MMC support exported via ethtool (v3) This patch adds the MMC management counters support. MMC module is an extension of the register address space and all the hardware counters can be accessed via ethtoo -S ethX. Note that, the MMC interrupts remain masked and the logic to handle this kind of interrupt will be added later (if actually useful). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2011-09-01 21:51:38 +00:00			`dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \`
stmmac: add the support for PTP hw clock driver This patch implements PHC (ptp hardware clock) driver for stmmac driver to support 1588 PTP. V2: added support for FINE method, reduced loop delay and review spinlock. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-03-26 04:43:11 +00:00			`mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y)`